linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Vignesh Raghavendra <vigneshr@ti.com>
To: Vignesh Raghavendra <vigneshr@ti.com>,
	Boris Brezillon <bbrezillon@kernel.org>,
	Marek Vasut <marek.vasut@gmail.com>,
	Richard Weinberger <richard@nod.at>,
	Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org,
	Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>,
	Tokunori Ikegami <ikegami.t@gmail.com>,
	linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Mason Yang <masonccyang@mxic.com.tw>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 4/5] dt-bindings: mtd: Add bindings for TI's AM654 HyperBus memory controller
Date: Tue, 25 Jun 2019 13:27:45 +0530	[thread overview]
Message-ID: <20190625075746.10439-5-vigneshr@ti.com> (raw)
In-Reply-To: <20190625075746.10439-1-vigneshr@ti.com>

Add binding documentation for TI's HyperBus memory controller present on
AM654 SoC.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
v8:
Fix white space issues

 .../devicetree/bindings/mtd/ti,am654-hbmc.txt | 51 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt

diff --git a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
new file mode 100644
index 000000000000..faa81c2e5da6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
@@ -0,0 +1,51 @@
+Bindings for HyperBus Memory Controller (HBMC) on TI's K3 family of SoCs
+
+Required properties:
+- compatible : "ti,am654-hbmc" for AM654 SoC
+- reg : Two entries:
+	First entry pointed to the register space of HBMC controller
+	Second entry pointing to the memory map region dedicated for
+	MMIO access to attached flash devices
+- ranges : Address translation from offset within CS to allocated MMIO
+	   space in SoC
+
+Optional properties:
+- mux-controls : phandle to the multiplexer that controls selection of
+		 HBMC vs OSPI inside Flash SubSystem (FSS). Default is OSPI,
+		 if property is absent.
+		 See Documentation/devicetree/bindings/mux/reg-mux.txt
+		 for mmio-mux binding details
+
+Example:
+
+	system-controller@47000000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x47000000 0x0 0x100>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hbmc_mux: multiplexer {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4 0x2>; /* 0: reg 0x4, bit 1 */
+		};
+	};
+
+	hbmc: hyperbus@47034000 {
+		compatible = "ti,am654-hbmc";
+		reg = <0x0 0x47034000 0x0 0x100>,
+			<0x5 0x00000000 0x1 0x0000000>;
+		power-domains = <&k3_pds 55>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x5 0x00000000 0x4000000>, /* CS0 - 64MB */
+			 <0x1 0x0 0x5 0x04000000 0x4000000>; /* CS1 - 64MB */
+		mux-controls = <&hbmc_mux 0>;
+
+		/* Slave flash node */
+		flash@0,0 {
+			compatible = "cypress,hyperflash", "cfi-flash";
+			reg = <0x0 0x0 0x4000000>;
+		};
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index c4860e53c695..4631c08d94e2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7369,6 +7369,7 @@ S:	Supported
 F:	drivers/mtd/hyperbus/
 F:	include/linux/mtd/hyperbus.h
 F:	Documentation/devicetree/bindings/mtd/cypress,hyperflash.txt
+F:	Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
 
 HYPERVISOR VIRTUAL CONSOLE DRIVER
 L:	linuxppc-dev@lists.ozlabs.org
-- 
2.22.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  parent reply	other threads:[~2019-06-25  8:00 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-25  7:57 [PATCH v8 0/5] MTD: Add Initial Hyperbus support Vignesh Raghavendra
2019-06-25  7:57 ` [PATCH v8 1/5] mtd: cfi_cmdset_0002: Add support for polling status register Vignesh Raghavendra
2019-06-25 17:01   ` Tokunori Ikegami
2019-06-26  6:17     ` Vignesh Raghavendra
2019-06-25  7:57 ` [PATCH v8 2/5] dt-bindings: mtd: Add binding documentation for HyperFlash Vignesh Raghavendra
2019-06-25  7:57 ` [PATCH v8 3/5] mtd: Add support for HyperBus memory devices Vignesh Raghavendra
2019-06-25 20:00   ` Sergei Shtylyov
2019-07-02 17:53   ` Sergei Shtylyov
2019-07-03  4:41     ` Vignesh Raghavendra
2019-07-03 18:14       ` Sergei Shtylyov
2019-07-04 18:35         ` Vignesh Raghavendra
2019-07-11 19:26   ` Sergei Shtylyov
2019-07-12  4:52     ` Vignesh Raghavendra
2022-06-27 15:28   ` Geert Uytterhoeven
2022-07-02 17:10     ` Raghavendra, Vignesh
2022-07-03  8:33       ` Geert Uytterhoeven
2019-06-25  7:57 ` Vignesh Raghavendra [this message]
2019-06-25  7:57 ` [PATCH v8 5/5] mtd: hyperbus: Add driver for TI's HyperBus memory controller Vignesh Raghavendra
2019-06-28 14:35 ` [PATCH v8 0/5] MTD: Add Initial Hyperbus support Vignesh Raghavendra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190625075746.10439-5-vigneshr@ti.com \
    --to=vigneshr@ti.com \
    --cc=bbrezillon@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=ikegami.t@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=masonccyang@mxic.com.tw \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=robh+dt@kernel.org \
    --cc=sergei.shtylyov@cogentembedded.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).