From: <Tudor.Ambarus@microchip.com>
To: <miquel.raynal@bootlin.com>, <richard@nod.at>, <vigneshr@ti.com>,
<boris.brezillon@collabora.com>
Cc: linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
Tudor.Ambarus@microchip.com
Subject: [PATCH v3 16/32] mtd: spi-nor: Rename label as it is no longer generic
Date: Tue, 29 Oct 2019 11:17:13 +0000 [thread overview]
Message-ID: <20191029111615.3706-17-tudor.ambarus@microchip.com> (raw)
In-Reply-To: <20191029111615.3706-1-tudor.ambarus@microchip.com>
From: Tudor Ambarus <tudor.ambarus@microchip.com>
Rename 'sst_write_err' label to 'out' as it is no longer generic for
all the errors in the sst_write() method, and may introduce confusion.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
drivers/mtd/spi-nor/spi-nor.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 21f01fdcfa16..ed7c233a7208 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2705,7 +2705,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
ret = spi_nor_write_enable(nor);
if (ret)
- goto sst_write_err;
+ goto out;
nor->sst_write_second = false;
@@ -2716,11 +2716,11 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
/* write one byte. */
ret = spi_nor_write_data(nor, to, 1, buf);
if (ret < 0)
- goto sst_write_err;
+ goto out;
WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret);
ret = spi_nor_wait_till_ready(nor);
if (ret)
- goto sst_write_err;
+ goto out;
to++;
actual++;
@@ -2733,11 +2733,11 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
/* write two bytes. */
ret = spi_nor_write_data(nor, to, 2, buf + actual);
if (ret < 0)
- goto sst_write_err;
+ goto out;
WARN(ret != 2, "While writing 2 bytes written %i bytes\n", ret);
ret = spi_nor_wait_till_ready(nor);
if (ret)
- goto sst_write_err;
+ goto out;
to += 2;
nor->sst_write_second = true;
}
@@ -2745,32 +2745,32 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
ret = spi_nor_write_disable(nor);
if (ret)
- goto sst_write_err;
+ goto out;
ret = spi_nor_wait_till_ready(nor);
if (ret)
- goto sst_write_err;
+ goto out;
/* Write out trailing byte if it exists. */
if (actual != len) {
ret = spi_nor_write_enable(nor);
if (ret)
- goto sst_write_err;
+ goto out;
nor->program_opcode = SPINOR_OP_BP;
ret = spi_nor_write_data(nor, to, 1, buf + actual);
if (ret < 0)
- goto sst_write_err;
+ goto out;
WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret);
ret = spi_nor_wait_till_ready(nor);
if (ret)
- goto sst_write_err;
+ goto out;
actual += 1;
ret = spi_nor_write_disable(nor);
}
-sst_write_err:
+out:
*retlen += actual;
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
return ret;
--
2.9.5
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2019-10-29 11:22 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-29 11:16 [PATCH v3 00/32] mtd: spi-nor: Quad Enable and (un)lock methods Tudor.Ambarus
2019-10-29 11:16 ` [PATCH v3 01/32] mtd: spi-nor: Prepend spi_nor_ to all Reg Ops methods Tudor.Ambarus
2019-10-31 10:34 ` Boris Brezillon
2019-11-02 10:34 ` Tudor.Ambarus
2019-10-29 11:16 ` [PATCH v3 02/32] mtd: spi-nor: Drop duplicated new line Tudor.Ambarus
2019-10-31 10:34 ` Boris Brezillon
2019-11-02 10:34 ` Tudor.Ambarus
2019-10-29 11:16 ` [PATCH v3 03/32] mtd: spi-nor: Group all Reg Ops to avoid forward declarations Tudor.Ambarus
2019-10-31 10:35 ` Boris Brezillon
2019-11-02 10:35 ` Tudor.Ambarus
2019-10-29 11:16 ` [PATCH v3 04/32] mtd: spi-nor: Stop compare with negative in Reg Ops methods Tudor.Ambarus
2019-10-31 10:36 ` Boris Brezillon
2019-11-02 10:36 ` Tudor.Ambarus
2019-10-29 11:16 ` [PATCH v3 05/32] mtd: spi-nor: Drop explicit cast to int to already int value Tudor.Ambarus
2019-10-31 10:36 ` Boris Brezillon
2019-11-02 10:37 ` Tudor.Ambarus
2019-10-29 11:16 ` [PATCH v3 06/32] mtd: spi-nor: Use dev_err() instead of pr_err() Tudor.Ambarus
2019-10-31 10:43 ` Boris Brezillon
2019-11-02 10:38 ` Tudor.Ambarus
2019-10-29 11:16 ` [PATCH v3 07/32] mtd: spi-nor: Don't overwrite errno from Reg Ops Tudor.Ambarus
2019-10-31 10:48 ` Boris Brezillon
2019-11-02 10:39 ` Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 08/32] mtd: spi-nor: Pointer parameter for SR in spi_nor_read_sr() Tudor.Ambarus
2019-10-31 10:51 ` Boris Brezillon
2019-11-02 10:42 ` Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 09/32] mtd: spi-nor: Pointer parameter for FSR in spi_nor_read_fsr() Tudor.Ambarus
2019-10-31 10:53 ` Boris Brezillon
2019-11-02 10:44 ` Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 10/32] mtd: spi-nor: Pointer parameter for CR in spi_nor_read_cr() Tudor.Ambarus
2019-10-31 10:58 ` Boris Brezillon
2019-10-31 14:26 ` Tudor.Ambarus
2019-11-02 10:45 ` Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 11/32] mtd: spi-nor: Drop redundant error reports in Reg Ops callers Tudor.Ambarus
2019-10-31 10:59 ` Boris Brezillon
2019-11-02 10:46 ` Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 12/32] mtd: spi-nor: Void return type for spi_nor_clear_sr/fsr() Tudor.Ambarus
2019-10-31 11:02 ` Boris Brezillon
2019-10-29 11:17 ` [PATCH v3 13/32] mtd: spi-nor: Print error messages inside Reg Ops methods Tudor.Ambarus
2019-10-31 11:05 ` Boris Brezillon
2019-10-31 14:18 ` Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 14/32] mtd: spi-nor: Fix retlen handling in sst_write() Tudor.Ambarus
2019-10-31 11:12 ` Boris Brezillon
2019-11-02 10:47 ` Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 15/32] mtd: spi-nor: Check for errors after each Register Operation Tudor.Ambarus
2019-10-31 6:57 ` Tudor.Ambarus
2019-10-29 11:17 ` Tudor.Ambarus [this message]
2019-10-31 11:14 ` [PATCH v3 16/32] mtd: spi-nor: Rename label as it is no longer generic Boris Brezillon
2019-10-29 11:17 ` [PATCH v3 17/32] mtd: spi-nor: Move the WE and wait calls inside Write SR methods Tudor.Ambarus
2019-10-31 11:15 ` Boris Brezillon
2019-10-29 11:17 ` [PATCH v3 18/32] mtd: spi-nor: Constify data to write to the Status Register Tudor.Ambarus
2019-10-31 11:16 ` Boris Brezillon
2019-11-02 10:48 ` Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 19/32] mtd: spi-nor: Merge spi_nor_write_sr() and spi_nor_write_sr_cr() Tudor.Ambarus
2019-10-31 11:17 ` Boris Brezillon
2019-10-29 11:17 ` [PATCH v3 20/32] mtd: spi-nor: Describe all the Reg Ops Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 21/32] mtd: spi-nor: Drop spansion_quad_enable() Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 22/32] mtd: spi-nor: Fix errno on Quad Enable methods Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 23/32] mtd: spi-nor: Check all the bits written, not just the BP ones Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 24/32] mtd: spi-nor: Print error message when the read back test fails Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 25/32] mtd: spi-nor: Fix clearing of QE bit on lock()/unlock() Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 26/32] mtd: spi-nor: Extend the QE Read Back test to the entire SR byte Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 27/32] mtd: spi-nor: Extend the QE Read Back test to both SR1 and SR2 Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 28/32] mtd: spi-nor: Rename CR_QUAD_EN_SPAN to SR2_QUAD_EN_BIT1 Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 29/32] mtd: spi-nor: Merge spansion Quad Enable methods Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 30/32] mtd: spi-nor: Rename macronix_quad_enable to spi_nor_sr1_bit6_quad_enable Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 31/32] mtd: spi-nor: Prepend "spi_nor_" to "sr2_bit7_quad_enable" Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 32/32] mtd: spi-nor: Rework the disabling of block write protection Tudor.Ambarus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191029111615.3706-17-tudor.ambarus@microchip.com \
--to=tudor.ambarus@microchip.com \
--cc=boris.brezillon@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).