linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Jan Kara <jack@suse.cz>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: linux-fsdevel@vger.kernel.org,
	Richard Weinberger <richard@nod.at>,
	linux-mtd@lists.infradead.org, kernel@pengutronix.de,
	Jan Kara <jack@suse.com>
Subject: Re: [PATCH 1/7] quota: Allow to pass mount path to quotactl
Date: Wed, 6 Nov 2019 11:05:15 +0100	[thread overview]
Message-ID: <20191106100515.GC16085@quack2.suse.cz> (raw)
In-Reply-To: <20191106091537.32480-2-s.hauer@pengutronix.de>

On Wed 06-11-19 10:15:31, Sascha Hauer wrote:
> This patch introduces the Q_PATH flag to the quotactl cmd argument.
> When given, the path given in the special argument to quotactl will
> be the mount path where the filesystem is mounted, instead of a path
> to the block device.
> This is necessary for filesystems which do not have a block device as
> backing store. Particularly this is done for upcoming UBIFS support.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

It seems you forgot to implement changes I've asked for in [1]?

[1] https://lore.kernel.org/linux-fsdevel/20191101160706.GA23441@quack2.suse.cz

								Honza
> ---
>  fs/quota/quota.c           | 37 ++++++++++++++++++++++++++++---------
>  include/uapi/linux/quota.h |  1 +
>  2 files changed, 29 insertions(+), 9 deletions(-)
> 
> diff --git a/fs/quota/quota.c b/fs/quota/quota.c
> index cb13fb76dbee..035cdd1b022b 100644
> --- a/fs/quota/quota.c
> +++ b/fs/quota/quota.c
> @@ -19,6 +19,7 @@
>  #include <linux/types.h>
>  #include <linux/writeback.h>
>  #include <linux/nospec.h>
> +#include <linux/mount.h>
>  
>  static int check_quotactl_permission(struct super_block *sb, int type, int cmd,
>  				     qid_t id)
> @@ -825,12 +826,16 @@ int kernel_quotactl(unsigned int cmd, const char __user *special,
>  {
>  	uint cmds, type;
>  	struct super_block *sb = NULL;
> -	struct path path, *pathp = NULL;
> +	struct path path, *pathp = NULL, qpath;
>  	int ret;
> +	bool q_path;
>  
>  	cmds = cmd >> SUBCMDSHIFT;
>  	type = cmd & SUBCMDMASK;
>  
> +	q_path = cmds & Q_PATH;
> +	cmds &= ~Q_PATH;
> +
>  	/*
>  	 * As a special case Q_SYNC can be called without a specific device.
>  	 * It will iterate all superblocks that have quota enabled and call
> @@ -855,19 +860,33 @@ int kernel_quotactl(unsigned int cmd, const char __user *special,
>  			pathp = &path;
>  	}
>  
> -	sb = quotactl_block(special, cmds);
> -	if (IS_ERR(sb)) {
> -		ret = PTR_ERR(sb);
> -		goto out;
> +	if (q_path) {
> +		ret = user_path_at(AT_FDCWD, special, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT,
> +				   &qpath);
> +		if (ret)
> +			goto out1;
> +
> +		sb = qpath.mnt->mnt_sb;
> +	} else {
> +		sb = quotactl_block(special, cmds);
> +		if (IS_ERR(sb)) {
> +			ret = PTR_ERR(sb);
> +			goto out;
> +		}
>  	}
>  
>  	ret = do_quotactl(sb, type, cmds, id, addr, pathp);
>  
> -	if (!quotactl_cmd_onoff(cmds))
> -		drop_super(sb);
> -	else
> -		drop_super_exclusive(sb);
> +	if (!q_path) {
> +		if (!quotactl_cmd_onoff(cmds))
> +			drop_super(sb);
> +		else
> +			drop_super_exclusive(sb);
> +	}
>  out:
> +	if (q_path)
> +		path_put(&qpath);
> +out1:
>  	if (pathp && !IS_ERR(pathp))
>  		path_put(pathp);
>  	return ret;
> diff --git a/include/uapi/linux/quota.h b/include/uapi/linux/quota.h
> index f17c9636a859..e1787c0df601 100644
> --- a/include/uapi/linux/quota.h
> +++ b/include/uapi/linux/quota.h
> @@ -71,6 +71,7 @@
>  #define Q_GETQUOTA 0x800007	/* get user quota structure */
>  #define Q_SETQUOTA 0x800008	/* set user quota structure */
>  #define Q_GETNEXTQUOTA 0x800009	/* get disk limits and usage >= ID */
> +#define Q_PATH     0x400000	/* quotactl special arg contains mount path */
>  
>  /* Quota format type IDs */
>  #define	QFMT_VFS_OLD 1
> -- 
> 2.24.0.rc1
> 
-- 
Jan Kara <jack@suse.com>
SUSE Labs, CR

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2019-11-06 10:05 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-06  9:15 [PATCH v3 0/7] Add quota support to UBIFS Sascha Hauer
2019-11-06  9:15 ` [PATCH 1/7] quota: Allow to pass mount path to quotactl Sascha Hauer
2019-11-06 10:05   ` Jan Kara [this message]
2019-11-06 10:15     ` Sascha Hauer
2019-11-06  9:15 ` [PATCH 2/7] ubifs: move checks and preparation into setflags() Sascha Hauer
2020-01-19 19:56   ` Richard Weinberger
2019-11-06  9:15 ` [PATCH 3/7] ubifs: Add support for FS_IOC_FS[SG]ETXATTR ioctls Sascha Hauer
2020-01-19 19:55   ` Richard Weinberger
2019-11-06  9:15 ` [PATCH 4/7] ubifs: do not ubifs_inode() on potentially NULL pointer Sascha Hauer
2020-01-19 19:58   ` Richard Weinberger
2019-11-06  9:15 ` [PATCH 5/7] ubifs: Add support for project id Sascha Hauer
2020-01-19 20:09   ` Richard Weinberger
2020-01-24  8:05     ` Sascha Hauer
2019-11-06  9:15 ` [PATCH 6/7] ubifs: export get_znode Sascha Hauer
2019-11-06  9:15 ` [PATCH 7/7] ubifs: Add quota support Sascha Hauer
2019-11-06 10:14   ` Jan Kara
2019-11-11  8:57     ` Sascha Hauer
2019-11-11 16:34       ` Jan Kara
2019-11-12  8:59         ` Sascha Hauer
2019-11-12  9:31           ` Jan Kara
2019-11-08 14:47   ` kbuild test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191106100515.GC16085@quack2.suse.cz \
    --to=jack@suse.cz \
    --cc=jack@suse.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=richard@nod.at \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).