[PATCH v5 0/4] fix the meson NFC clock

[PATCH v5 0/4] fix the meson NFC clock

[Liang Yang]

EMMC and NAND have the same clock control register named 'SD_EMMC_CLOCK'
which is defined in EMMC port internally. bit0~5 of 'SD_EMMC_CLOCK' is
the divider and bit6~7 is the mux for fix pll and xtal. At the beginning,
a common MMC and NAND sub-clock was discussed and planed to be implemented
as NFC clock provider, but now this series of patches of a common MMC and
NAND sub-clock are never being accepted and the current binding was never
valid. the reasons are:
1. EMMC and NAND, which are mutually exclusive anyway
2. coupling the EMMC and NAND.
3. it seems that a common MMC and NAND sub-clock is over engineered.
and let us see the link for more information:
https://lore.kernel.org/all/20220121074508.42168-5-liang.yang@amlogic.com
so The meson nfc can't work now, let us rework the clock.

Changes since v4 [5]
 - split the dt binding patch into two patches, one for fixing, 
   clock, the other for coverting to yaml
 - split the nfc driver patch into two patches, one for fixing 
   clock, the other for refining the get nfc resource.

Changes since v3 [4]
 - use devm_platform_ioremap_resource_byname
 - dt_binding_check for mtd/amlogic,meson-nand.yaml

Changes since v2 [3]
 - use fw_name from dts, instead the wrong way using __clk_get_name
 - reg resource size change to 0x800
 - use reg-names

Changes since v1 [2]
 - use clk_parent_data instead of parent_names
 - define a reg resource instead of sd_emmc_c_clkc 

[1] https://lore.kernel.org/r/20220106033130.37623-1-liang.yang@amlogic.com
    https://lore.kernel.org/r/20220106032504.23310-1-liang.yang@amlogic.com
[2] https://lore.kernel.org/all/20220217063346.21691-1-liang.yang@amlogic.com
[3] https://lore.kernel.org/all/20220318124121.26117-1-liang.yang@amlogic.com
[4] https://lore.kernel.org/all/20220402074921.13316-1-liang.yang@amlogic.com/

Liang Yang (4):
  dt-bindings: nand: meson: fix meson nfc clock
  mtd: rawnand: meson: fix the clock
  mtd: rawnand: meson: refine resource getting in probe
  dt-bindings: nand: meson: convert txt to yaml

 .../bindings/mtd/amlogic,meson-nand.txt       | 60 -------------
 .../bindings/mtd/amlogic,meson-nand.yaml      | 88 +++++++++++++++++++
 drivers/mtd/nand/raw/meson_nand.c             | 86 +++++++++---------
 3 files changed, 130 insertions(+), 104 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
 create mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml

-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v5 1/4] dt-bindings: nand: meson: fix meson nfc clock

[Liang Yang]

EMMC and NAND have the same clock control register named 'SD_EMMC_CLOCK'
which is defined in EMMC port internally. bit0~5 of 'SD_EMMC_CLOCK' is
the divider and bit6~7 is the mux for fix pll and xtal. At the beginning,
a common MMC and NAND sub-clock was discussed and planed to be implemented
as NFC clock provider, but now this series of patches of a common MMC and
NAND sub-clock are never being accepted and the current binding was never
valid. the reasons are:
1. EMMC and NAND, which are mutually exclusive anyway
2. coupling the EMMC and NAND.
3. it seems that a common MMC and NAND sub-clock is over engineered.
and let us see the link for more information:
https://lore.kernel.org/all/20220121074508.42168-5-liang.yang@amlogic.com
so The meson nfc can't work now, let us rework the clock.

Signed-off-by: Liang Yang <liang.yang@amlogic.com>
---
 .../bindings/mtd/amlogic,meson-nand.txt       | 29 ++++++++-----------
 1 file changed, 12 insertions(+), 17 deletions(-)

diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
index 5794ab1147c1..5d5cdfef417f 100644
--- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
@@ -7,18 +7,19 @@ Required properties:
 - compatible : contains one of:
   - "amlogic,meson-gxl-nfc"
   - "amlogic,meson-axg-nfc"
+
+- reg        : Offset and length of the register set
+
+- reg-names  : "nfc" is the register set for NFC controller and "emmc"
+		is the register set for MCI controller.
+
 - clocks     :
 	A list of phandle + clock-specifier pairs for the clocks listed
 	in clock-names.
 
 - clock-names: Should contain the following:
 	"core" - NFC module gate clock
-	"device" - device clock from eMMC sub clock controller
-	"rx" - rx clock phase
-	"tx" - tx clock phase
-
-- amlogic,mmc-syscon	: Required for NAND clocks, it's shared with SD/eMMC
-				controller port C
+	"device" - parent clock for internal NFC
 
 Optional children nodes:
 Children nodes represent the available nand chips.
@@ -28,24 +29,18 @@ see Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindi
 
 Example demonstrate on AXG SoC:
 
-	sd_emmc_c_clkc: mmc@7000 {
-		compatible = "amlogic,meson-axg-mmc-clkc", "syscon";
-		reg = <0x0 0x7000 0x0 0x800>;
-	};
-
 	nand-controller@7800 {
 		compatible = "amlogic,meson-axg-nfc";
-		reg = <0x0 0x7800 0x0 0x100>;
+		reg = <0x0 0x7800 0x0 0x100>,
+		      <0x0 0x7000 0x0 0x800>;
+		reg-names = "nfc", "emmc";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
 
 		clocks = <&clkc CLKID_SD_EMMC_C>,
-			<&sd_emmc_c_clkc CLKID_MMC_DIV>,
-			<&sd_emmc_c_clkc CLKID_MMC_PHASE_RX>,
-			<&sd_emmc_c_clkc CLKID_MMC_PHASE_TX>;
-		clock-names = "core", "device", "rx", "tx";
-		amlogic,mmc-syscon = <&sd_emmc_c_clkc>;
+			 <&clkc CLKID_FCLK_DIV2>;
+		clock-names = "core", "device";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&nand_pins>;
-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v5 2/4] mtd: rawnand: meson: fix the clock

[Liang Yang]

EMMC and NAND have the same clock control register named 'SD_EMMC_CLOCK'
which is defined in EMMC port internally. bit0~5 of 'SD_EMMC_CLOCK' is
the divider and bit6~7 is the mux for fix pll and xtal. At the beginning,
a common MMC and NAND sub-clock was discussed and planed to be implemented
as NFC clock provider, but now this series of patches of a common MMC and
NAND sub-clock are never being accepted.  the reasons for giving up are:
1. EMMC and NAND, which are mutually exclusive anyway
2. coupling the EMMC and NAND.
3. it seems that a common MMC and NAND sub-clock is over engineered.
and let us see the link fot more information:
https://lore.kernel.org/all/20220121074508.42168-5-liang.yang@amlogic.com
so The meson nfc can't work now, let us rework the clock.

Signed-off-by: Liang Yang <liang.yang@amlogic.com>
---
 drivers/mtd/nand/raw/meson_nand.c | 82 +++++++++++++++----------------
 1 file changed, 41 insertions(+), 41 deletions(-)

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index ac3be92872d0..cc93667a1e7f 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -10,6 +10,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mfd/syscon.h>
@@ -56,6 +57,9 @@
 
 #define NFC_RB_IRQ_EN		BIT(21)
 
+#define CLK_DIV_SHIFT		0
+#define CLK_DIV_WIDTH		6
+
 #define CMDRWGEN(cmd_dir, ran, bch, short_mode, page_size, pages)	\
 	(								\
 		(cmd_dir)			|			\
@@ -151,15 +155,15 @@ struct meson_nfc {
 	struct nand_controller controller;
 	struct clk *core_clk;
 	struct clk *device_clk;
-	struct clk *phase_tx;
-	struct clk *phase_rx;
+	struct clk *nand_clk;
+	struct clk_divider nand_divider;
 
 	unsigned long clk_rate;
 	u32 bus_timing;
 
 	struct device *dev;
 	void __iomem *reg_base;
-	struct regmap *reg_clk;
+	void __iomem *reg_clk;
 	struct completion completion;
 	struct list_head chips;
 	const struct meson_nfc_data *data;
@@ -235,7 +239,7 @@ static void meson_nfc_select_chip(struct nand_chip *nand, int chip)
 	nfc->timing.tbers_max = meson_chip->tbers_max;
 
 	if (nfc->clk_rate != meson_chip->clk_rate) {
-		ret = clk_set_rate(nfc->device_clk, meson_chip->clk_rate);
+		ret = clk_set_rate(nfc->nand_clk, meson_chip->clk_rate);
 		if (ret) {
 			dev_err(nfc->dev, "failed to set clock rate\n");
 			return;
@@ -987,6 +991,8 @@ static const struct mtd_ooblayout_ops meson_ooblayout_ops = {
 
 static int meson_nfc_clk_init(struct meson_nfc *nfc)
 {
+	struct clk_parent_data nfc_divider_parent_data[1];
+	struct clk_init_data init = {0};
 	int ret;
 
 	/* request core clock */
@@ -1002,21 +1008,28 @@ static int meson_nfc_clk_init(struct meson_nfc *nfc)
 		return PTR_ERR(nfc->device_clk);
 	}
 
-	nfc->phase_tx = devm_clk_get(nfc->dev, "tx");
-	if (IS_ERR(nfc->phase_tx)) {
-		dev_err(nfc->dev, "failed to get TX clk\n");
-		return PTR_ERR(nfc->phase_tx);
-	}
-
-	nfc->phase_rx = devm_clk_get(nfc->dev, "rx");
-	if (IS_ERR(nfc->phase_rx)) {
-		dev_err(nfc->dev, "failed to get RX clk\n");
-		return PTR_ERR(nfc->phase_rx);
-	}
+	init.name = devm_kasprintf(nfc->dev,
+				   GFP_KERNEL, "%s#div",
+				   dev_name(nfc->dev));
+	init.ops = &clk_divider_ops;
+	nfc_divider_parent_data[0].fw_name = "device";
+	init.parent_data = nfc_divider_parent_data;
+	init.num_parents = 1;
+	nfc->nand_divider.reg = nfc->reg_clk;
+	nfc->nand_divider.shift = CLK_DIV_SHIFT;
+	nfc->nand_divider.width = CLK_DIV_WIDTH;
+	nfc->nand_divider.hw.init = &init;
+	nfc->nand_divider.flags = CLK_DIVIDER_ONE_BASED |
+				  CLK_DIVIDER_ROUND_CLOSEST |
+				  CLK_DIVIDER_ALLOW_ZERO;
+
+	nfc->nand_clk = devm_clk_register(nfc->dev, &nfc->nand_divider.hw);
+	if (IS_ERR(nfc->nand_clk))
+		return PTR_ERR(nfc->nand_clk);
 
 	/* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
-	regmap_update_bits(nfc->reg_clk,
-			   0, CLK_SELECT_NAND, CLK_SELECT_NAND);
+	writel(CLK_SELECT_NAND | readl(nfc->reg_clk),
+	       nfc->reg_clk);
 
 	ret = clk_prepare_enable(nfc->core_clk);
 	if (ret) {
@@ -1030,29 +1043,21 @@ static int meson_nfc_clk_init(struct meson_nfc *nfc)
 		goto err_device_clk;
 	}
 
-	ret = clk_prepare_enable(nfc->phase_tx);
+	ret = clk_prepare_enable(nfc->nand_clk);
 	if (ret) {
-		dev_err(nfc->dev, "failed to enable TX clock\n");
-		goto err_phase_tx;
+		dev_err(nfc->dev, "pre enable NFC divider fail\n");
+		goto err_nand_clk;
 	}
 
-	ret = clk_prepare_enable(nfc->phase_rx);
-	if (ret) {
-		dev_err(nfc->dev, "failed to enable RX clock\n");
-		goto err_phase_rx;
-	}
-
-	ret = clk_set_rate(nfc->device_clk, 24000000);
+	ret = clk_set_rate(nfc->nand_clk, 24000000);
 	if (ret)
-		goto err_disable_rx;
+		goto err_disable_clk;
 
 	return 0;
 
-err_disable_rx:
-	clk_disable_unprepare(nfc->phase_rx);
-err_phase_rx:
-	clk_disable_unprepare(nfc->phase_tx);
-err_phase_tx:
+err_disable_clk:
+	clk_disable_unprepare(nfc->nand_clk);
+err_nand_clk:
 	clk_disable_unprepare(nfc->device_clk);
 err_device_clk:
 	clk_disable_unprepare(nfc->core_clk);
@@ -1061,8 +1066,7 @@ static int meson_nfc_clk_init(struct meson_nfc *nfc)
 
 static void meson_nfc_disable_clk(struct meson_nfc *nfc)
 {
-	clk_disable_unprepare(nfc->phase_rx);
-	clk_disable_unprepare(nfc->phase_tx);
+	clk_disable_unprepare(nfc->nand_clk);
 	clk_disable_unprepare(nfc->device_clk);
 	clk_disable_unprepare(nfc->core_clk);
 }
@@ -1396,13 +1400,9 @@ static int meson_nfc_probe(struct platform_device *pdev)
 	if (IS_ERR(nfc->reg_base))
 		return PTR_ERR(nfc->reg_base);
 
-	nfc->reg_clk =
-		syscon_regmap_lookup_by_phandle(dev->of_node,
-						"amlogic,mmc-syscon");
-	if (IS_ERR(nfc->reg_clk)) {
-		dev_err(dev, "Failed to lookup clock base\n");
+	nfc->reg_clk = devm_platform_ioremap_resource_byname(pdev, "emmc");
+	if (IS_ERR(nfc->reg_clk))
 		return PTR_ERR(nfc->reg_clk);
-	}
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v5 3/4] mtd: rawnand: meson: refine resource getting in probe

[Liang Yang]

Signed-off-by: Liang Yang <liang.yang@amlogic.com>
---
 drivers/mtd/nand/raw/meson_nand.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index cc93667a1e7f..6e50387475bb 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -1378,7 +1378,6 @@ static int meson_nfc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct meson_nfc *nfc;
-	struct resource *res;
 	int ret, irq;
 
 	nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL);
@@ -1395,8 +1394,7 @@ static int meson_nfc_probe(struct platform_device *pdev)
 
 	nfc->dev = dev;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	nfc->reg_base = devm_ioremap_resource(dev, res);
+	nfc->reg_base = devm_platform_ioremap_resource_byname(pdev, "nfc");
 	if (IS_ERR(nfc->reg_base))
 		return PTR_ERR(nfc->reg_base);
 
-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v5 4/4] dt-bindings: nand: meson: convert txt to yaml

[Liang Yang]

Signed-off-by: Liang Yang <liang.yang@amlogic.com>
---
 .../bindings/mtd/amlogic,meson-nand.txt       | 55 ------------
 .../bindings/mtd/amlogic,meson-nand.yaml      | 88 +++++++++++++++++++
 2 files changed, 88 insertions(+), 55 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
 create mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml

diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
deleted file mode 100644
index 5d5cdfef417f..000000000000
--- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
-
-This file documents the properties in addition to those available in
-the MTD NAND bindings.
-
-Required properties:
-- compatible : contains one of:
-  - "amlogic,meson-gxl-nfc"
-  - "amlogic,meson-axg-nfc"
-
-- reg        : Offset and length of the register set
-
-- reg-names  : "nfc" is the register set for NFC controller and "emmc"
-		is the register set for MCI controller.
-
-- clocks     :
-	A list of phandle + clock-specifier pairs for the clocks listed
-	in clock-names.
-
-- clock-names: Should contain the following:
-	"core" - NFC module gate clock
-	"device" - parent clock for internal NFC
-
-Optional children nodes:
-Children nodes represent the available nand chips.
-
-Other properties:
-see Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings.
-
-Example demonstrate on AXG SoC:
-
-	nand-controller@7800 {
-		compatible = "amlogic,meson-axg-nfc";
-		reg = <0x0 0x7800 0x0 0x100>,
-		      <0x0 0x7000 0x0 0x800>;
-		reg-names = "nfc", "emmc";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
-
-		clocks = <&clkc CLKID_SD_EMMC_C>,
-			 <&clkc CLKID_FCLK_DIV2>;
-		clock-names = "core", "device";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&nand_pins>;
-
-		nand@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			nand-on-flash-bbt;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
new file mode 100644
index 000000000000..42634e9c0d3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/amlogic,meson-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
+
+allOf:
+  - $ref: "nand-controller.yaml"
+
+maintainers:
+  - liang.yang@amlogic.com
+
+properties:
+  compatible:
+    enum:
+      - "amlogic,meson-gxl-nfc"
+      - "amlogic,meson-axg-nfc"
+
+  reg:
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: device
+
+patternProperties:
+  "^nand@[0-7]$":
+    type: object
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+
+      nand-ecc-mode:
+        const: hw
+
+      nand-ecc-step-size:
+        const: 1024
+
+      nand-ecc-strength:
+        enum: [8, 16, 24, 30, 40, 50, 60]
+        description: |
+          The ECC configurations that can be supported are as follows.
+            meson-gxl-nfc 8, 16, 24, 30, 40, 50, 60
+            meson-axg-nfc 8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/axg-clkc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    nand-controller@ffe07800 {
+      compatible = "amlogic,meson-axg-nfc";
+      reg = <0xffe07800 0x100>, <0xffe07000 0x800>;
+      reg-names = "nfc", "emmc";
+      interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
+      clocks = <&clkc CLKID_SD_EMMC_C>,  <&clkc CLKID_FCLK_DIV2>;
+      clock-names = "core", "device";
+
+      pinctrl-0 = <&nand_pins>;
+      pinctrl-names = "default";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      nand@0 {
+        reg = <0>;
+      };
+    };
+
+...
-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v5 3/4] mtd: rawnand: meson: refine resource getting in probe

[Neil Armstrong]

On 13/05/2022 14:34, Liang Yang wrote:
> Signed-off-by: Liang Yang <liang.yang@amlogic.com>
> ---
>   drivers/mtd/nand/raw/meson_nand.c | 4 +---
>   1 file changed, 1 insertion(+), 3 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> index cc93667a1e7f..6e50387475bb 100644
> --- a/drivers/mtd/nand/raw/meson_nand.c
> +++ b/drivers/mtd/nand/raw/meson_nand.c
> @@ -1378,7 +1378,6 @@ static int meson_nfc_probe(struct platform_device *pdev)
>   {
>   	struct device *dev = &pdev->dev;
>   	struct meson_nfc *nfc;
> -	struct resource *res;
>   	int ret, irq;
>   
>   	nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL);
> @@ -1395,8 +1394,7 @@ static int meson_nfc_probe(struct platform_device *pdev)
>   
>   	nfc->dev = dev;
>   
> -	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	nfc->reg_base = devm_ioremap_resource(dev, res);
> +	nfc->reg_base = devm_platform_ioremap_resource_byname(pdev, "nfc");
>   	if (IS_ERR(nfc->reg_base))
>   		return PTR_ERR(nfc->reg_base);
>   

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v5 2/4] mtd: rawnand: meson: fix the clock

[kernel test robot]

Hi Liang,

I love your patch! Yet something to improve:

[auto build test ERROR on mtd/mtd/next]
[also build test ERROR on mtd/mtd/fixes mtd/nand/next v5.18-rc6 next-20220513]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/intel-lab-lkp/linux/commits/Liang-Yang/fix-the-meson-NFC-clock/20220513-203700
base:   https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next
config: m68k-buildonly-randconfig-r001-20220512 (https://download.01.org/0day-ci/archive/20220514/202205140935.9YRSlRhB-lkp@intel.com/config)
compiler: m68k-linux-gcc (GCC) 11.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/2a8371d672486fa71241af04615efeff5efed94b
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Liang-Yang/fix-the-meson-NFC-clock/20220513-203700
        git checkout 2a8371d672486fa71241af04615efeff5efed94b
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.3.0 make.cross W=1 O=build_dir ARCH=m68k SHELL=/bin/bash

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   m68k-linux-ld: drivers/mtd/nand/raw/meson_nand.o: in function `meson_nfc_probe':
>> meson_nand.c:(.text+0xcf8): undefined reference to `clk_divider_ops'
>> m68k-linux-ld: meson_nand.c:(.text+0xd38): undefined reference to `devm_clk_register'

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v5 3/4] mtd: rawnand: meson: refine resource getting in probe

[Kevin Hilman]

Liang Yang <liang.yang@amlogic.com> writes:

> Signed-off-by: Liang Yang <liang.yang@amlogic.com>

Patch should have a changelog.

Reviewed-by: Kevin Hilman <khilman@baylibre.com>

> ---
>  drivers/mtd/nand/raw/meson_nand.c | 4 +---
>  1 file changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> index cc93667a1e7f..6e50387475bb 100644
> --- a/drivers/mtd/nand/raw/meson_nand.c
> +++ b/drivers/mtd/nand/raw/meson_nand.c
> @@ -1378,7 +1378,6 @@ static int meson_nfc_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
>  	struct meson_nfc *nfc;
> -	struct resource *res;
>  	int ret, irq;
>  
>  	nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL);
> @@ -1395,8 +1394,7 @@ static int meson_nfc_probe(struct platform_device *pdev)
>  
>  	nfc->dev = dev;
>  
> -	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	nfc->reg_base = devm_ioremap_resource(dev, res);
> +	nfc->reg_base = devm_platform_ioremap_resource_byname(pdev, "nfc");
>  	if (IS_ERR(nfc->reg_base))
>  		return PTR_ERR(nfc->reg_base);
>  
> -- 
> 2.34.1
>
>
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v5 2/4] mtd: rawnand: meson: fix the clock

[Kevin Hilman]

Hi Liang,

Liang Yang <liang.yang@amlogic.com> writes:

> EMMC and NAND have the same clock control register named 'SD_EMMC_CLOCK'
> which is defined in EMMC port internally. bit0~5 of 'SD_EMMC_CLOCK' is
> the divider and bit6~7 is the mux for fix pll and xtal. At the beginning,
> a common MMC and NAND sub-clock was discussed and planed to be implemented
> as NFC clock provider, but now this series of patches of a common MMC and
> NAND sub-clock are never being accepted.  the reasons for giving up are:
> 1. EMMC and NAND, which are mutually exclusive anyway
> 2. coupling the EMMC and NAND.
> 3. it seems that a common MMC and NAND sub-clock is over engineered.
> and let us see the link fot more information:
> https://lore.kernel.org/all/20220121074508.42168-5-liang.yang@amlogic.com
> so The meson nfc can't work now, let us rework the clock.
>
> Signed-off-by: Liang Yang <liang.yang@amlogic.com>

Reviewed-by: Kevin Hilman <khilman@baylibre.com>

Thank you for your persistence in working on multiple iterations of this
until we came to a final agreement.

Kevin

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v5 3/4] mtd: rawnand: meson: refine resource getting in probe

[Liang Yang]

Hi Kevin,

On 2022/5/27 0:27, Kevin Hilman wrote:
> [ EXTERNAL EMAIL ]
> 
> Liang Yang <liang.yang@amlogic.com> writes:
> 
>> Signed-off-by: Liang Yang <liang.yang@amlogic.com>
> 
> Patch should have a changelog.ok, i will add it.
> 
> Reviewed-by: Kevin Hilman <khilman@baylibre.com>
> 
>> ---
>>   drivers/mtd/nand/raw/meson_nand.c | 4 +---
>>   1 file changed, 1 insertion(+), 3 deletions(-)
>>
>> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
>> index cc93667a1e7f..6e50387475bb 100644
>> --- a/drivers/mtd/nand/raw/meson_nand.c
>> +++ b/drivers/mtd/nand/raw/meson_nand.c
>> @@ -1378,7 +1378,6 @@ static int meson_nfc_probe(struct platform_device *pdev)
>>   {
>>   	struct device *dev = &pdev->dev;
>>   	struct meson_nfc *nfc;
>> -	struct resource *res;
>>   	int ret, irq;
>>   
>>   	nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL);
>> @@ -1395,8 +1394,7 @@ static int meson_nfc_probe(struct platform_device *pdev)
>>   
>>   	nfc->dev = dev;
>>   
>> -	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> -	nfc->reg_base = devm_ioremap_resource(dev, res);
>> +	nfc->reg_base = devm_platform_ioremap_resource_byname(pdev, "nfc");
>>   	if (IS_ERR(nfc->reg_base))
>>   		return PTR_ERR(nfc->reg_base);
>>   
>> -- 
>> 2.34.1
>>
>>
>> _______________________________________________
>> linux-amlogic mailing list
>> linux-amlogic@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-amlogic
> 
> .

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v5 2/4] mtd: rawnand: meson: fix the clock

[Liang Yang]

Hi Kevin,

Thanks for your review.

On 2022/5/27 0:28, Kevin Hilman wrote:
> [ EXTERNAL EMAIL ]
> 
> Hi Liang,
> 
> Liang Yang <liang.yang@amlogic.com> writes:
> 
>> EMMC and NAND have the same clock control register named 'SD_EMMC_CLOCK'
>> which is defined in EMMC port internally. bit0~5 of 'SD_EMMC_CLOCK' is
>> the divider and bit6~7 is the mux for fix pll and xtal. At the beginning,
>> a common MMC and NAND sub-clock was discussed and planed to be implemented
>> as NFC clock provider, but now this series of patches of a common MMC and
>> NAND sub-clock are never being accepted.  the reasons for giving up are:
>> 1. EMMC and NAND, which are mutually exclusive anyway
>> 2. coupling the EMMC and NAND.
>> 3. it seems that a common MMC and NAND sub-clock is over engineered.
>> and let us see the link fot more information:
>> https://lore.kernel.org/all/20220121074508.42168-5-liang.yang@amlogic.com
>> so The meson nfc can't work now, let us rework the clock.
>>
>> Signed-off-by: Liang Yang <liang.yang@amlogic.com>
> 
> Reviewed-by: Kevin Hilman <khilman@baylibre.com>
> 
> Thank you for your persistence in working on multiple iterations of this
> until we came to a final agreement.
> 
> Kevin
> 
> .

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v5 1/4] dt-bindings: nand: meson: fix meson nfc clock

[Rob Herring]

On Fri, 13 May 2022 20:34:01 +0800, Liang Yang wrote:
> EMMC and NAND have the same clock control register named 'SD_EMMC_CLOCK'
> which is defined in EMMC port internally. bit0~5 of 'SD_EMMC_CLOCK' is
> the divider and bit6~7 is the mux for fix pll and xtal. At the beginning,
> a common MMC and NAND sub-clock was discussed and planed to be implemented
> as NFC clock provider, but now this series of patches of a common MMC and
> NAND sub-clock are never being accepted and the current binding was never
> valid. the reasons are:
> 1. EMMC and NAND, which are mutually exclusive anyway
> 2. coupling the EMMC and NAND.
> 3. it seems that a common MMC and NAND sub-clock is over engineered.
> and let us see the link for more information:
> https://lore.kernel.org/all/20220121074508.42168-5-liang.yang@amlogic.com
> so The meson nfc can't work now, let us rework the clock.
> 
> Signed-off-by: Liang Yang <liang.yang@amlogic.com>
> ---
>  .../bindings/mtd/amlogic,meson-nand.txt       | 29 ++++++++-----------
>  1 file changed, 12 insertions(+), 17 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/