[PATCH 0/3] mtd: spi-nor: Extend SFDP to support additional octal modes as per latest JEDEC standard

[PATCH 0/3] mtd: spi-nor: Extend SFDP to support additional octal modes as per latest JEDEC standard

[Nathan Barrett-Morrison]

In the latest JEDEC standard (JESD216F), there are now bitfields in the
4 byte address instruction table for 1S-1S-8S and 1S-8S-8S modes

This patchset adds support for checking the 4BAIT for these modes,
along with additional NO_SFDP_FLAGS to support enabling these new modes

Nathan Barrett-Morrison (3):
  mtd: spi-nor: Extend SFDP 4byte address instruction lookup table with
    new octal modes as per JEDEC JESD216F
  mtd: spi-nor: Add additional octal-mode flags to be checked during
    SFDP
  mtd: spi-nor: Add support for IS25LX256 operating in 1S-1S-8S mode

 drivers/mtd/spi-nor/core.c | 21 ++++++++++++++++++++-
 drivers/mtd/spi-nor/core.h |  9 ++++++---
 drivers/mtd/spi-nor/issi.c |  3 +++
 drivers/mtd/spi-nor/sfdp.c |  5 +++++
 4 files changed, 34 insertions(+), 4 deletions(-)

-- 
2.30.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 1/3] mtd: spi-nor: Extend SFDP 4byte address instruction lookup table with new octal modes as per JEDEC JESD216F

[Nathan Barrett-Morrison]

This adds the new bit fields for
reading: 1S-1S-8S, 1S-8S-8S, 1D-8D-8D
programming: 1S-1S-8S, 1S-8S-8S

Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
---
 drivers/mtd/spi-nor/sfdp.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index 2257f1b4c2e2..e4e87815ba94 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -953,11 +953,16 @@ static int spi_nor_parse_4bait(struct spi_nor *nor,
 		{ SNOR_HWCAPS_READ_1_1_1_DTR,	BIT(13) },
 		{ SNOR_HWCAPS_READ_1_2_2_DTR,	BIT(14) },
 		{ SNOR_HWCAPS_READ_1_4_4_DTR,	BIT(15) },
+		{ SNOR_HWCAPS_READ_1_1_8,       BIT(20) },
+		{ SNOR_HWCAPS_READ_1_8_8,       BIT(21) },
+		{ SNOR_HWCAPS_READ_1_8_8_DTR,   BIT(22) },
 	};
 	static const struct sfdp_4bait programs[] = {
 		{ SNOR_HWCAPS_PP,		BIT(6) },
 		{ SNOR_HWCAPS_PP_1_1_4,		BIT(7) },
 		{ SNOR_HWCAPS_PP_1_4_4,		BIT(8) },
+		{ SNOR_HWCAPS_PP_1_1_8,         BIT(23) },
+		{ SNOR_HWCAPS_PP_1_8_8,         BIT(24) },
 	};
 	static const struct sfdp_4bait erases[SNOR_ERASE_TYPE_MAX] = {
 		{ 0u /* not used */,		BIT(9) },
-- 
2.30.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 2/3] mtd: spi-nor: Add additional octal-mode flags to be checked during SFDP

[Nathan Barrett-Morrison]

This adds some support for searching a chips SFDP table for:

read commands: 1S-8S-8S
program commands: 1S-1S-8S, 1S-8S-8S

Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
---
 drivers/mtd/spi-nor/core.c | 21 ++++++++++++++++++++-
 drivers/mtd/spi-nor/core.h |  9 ++++++---
 2 files changed, 26 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index bee8fc4c9f07..7475a9a22881 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2335,7 +2335,7 @@ static void spi_nor_no_sfdp_init_params(struct spi_nor *nor)
 {
 	struct spi_nor_flash_parameter *params = nor->params;
 	struct spi_nor_erase_map *map = &params->erase_map;
-	const u8 no_sfdp_flags = nor->info->no_sfdp_flags;
+	const u16 no_sfdp_flags = nor->info->no_sfdp_flags;
 	u8 i, erase_mask;
 
 	if (no_sfdp_flags & SPI_NOR_DUAL_READ) {
@@ -2359,6 +2359,25 @@ static void spi_nor_no_sfdp_init_params(struct spi_nor *nor)
 					  SNOR_PROTO_1_1_8);
 	}
 
+	if (no_sfdp_flags & SPI_NOR_OCTAL_READ_1_8_8) {
+		params->hwcaps.mask |= SNOR_HWCAPS_READ_1_8_8;
+		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_8_8],
+					  0, 16, SPINOR_OP_READ_1_8_8,
+					  SNOR_PROTO_1_8_8);
+	}
+
+	if (no_sfdp_flags & SPI_NOR_OCTAL_PP) {
+		params->hwcaps.mask |= SNOR_HWCAPS_PP_1_1_8;
+		spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP_1_1_8],
+					SPINOR_OP_PP_1_1_8, SNOR_PROTO_1_1_8);
+	}
+
+	if (no_sfdp_flags & SPI_NOR_OCTAL_PP_1_8_8) {
+		params->hwcaps.mask |= SNOR_HWCAPS_PP_1_8_8;
+		spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP_8_8_8],
+					SPINOR_OP_PP_1_8_8, SNOR_PROTO_1_8_8);
+	}
+
 	if (no_sfdp_flags & SPI_NOR_OCTAL_DTR_READ) {
 		params->hwcaps.mask |= SNOR_HWCAPS_READ_8_8_8_DTR;
 		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_8_8_8_DTR],
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 85b0cf254e97..25a0d4f1850b 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -508,14 +508,17 @@ struct flash_info {
 #define NO_CHIP_ERASE			BIT(7)
 #define SPI_NOR_NO_FR			BIT(8)
 
-	u8 no_sfdp_flags;
+	u16 no_sfdp_flags;
 #define SPI_NOR_SKIP_SFDP		BIT(0)
 #define SECT_4K				BIT(1)
 #define SPI_NOR_DUAL_READ		BIT(3)
 #define SPI_NOR_QUAD_READ		BIT(4)
 #define SPI_NOR_OCTAL_READ		BIT(5)
-#define SPI_NOR_OCTAL_DTR_READ		BIT(6)
-#define SPI_NOR_OCTAL_DTR_PP		BIT(7)
+#define SPI_NOR_OCTAL_READ_1_8_8	BIT(6)
+#define SPI_NOR_OCTAL_PP		BIT(7)
+#define SPI_NOR_OCTAL_PP_1_8_8		BIT(8)
+#define SPI_NOR_OCTAL_DTR_READ		BIT(9)
+#define SPI_NOR_OCTAL_DTR_PP		BIT(10)
 
 	u8 fixup_flags;
 #define SPI_NOR_4B_OPCODES		BIT(0)
-- 
2.30.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 3/3] mtd: spi-nor: Add support for IS25LX256 operating in 1S-1S-8S mode

[Nathan Barrett-Morrison]

This adds the IS25LX256 chip into the ISSI flash_info parts table

Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
---
 drivers/mtd/spi-nor/issi.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
index 89a66a19d754..b4412a9afc4e 100644
--- a/drivers/mtd/spi-nor/issi.c
+++ b/drivers/mtd/spi-nor/issi.c
@@ -74,6 +74,9 @@ static const struct flash_info issi_nor_parts[] = {
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
 		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
 		.fixups = &is25lp256_fixups },
+	{ "is25lx256", INFO(0x9d5a19, 0, 128 * 1024, 256)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_4B_OPCODES |
+			      SPI_NOR_OCTAL_PP | SPI_NOR_OCTAL_READ) },
 
 	/* PMC */
 	{ "pm25lv512",   INFO(0,        0, 32 * 1024,    2)
-- 
2.30.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/