linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Hauke Mehrtens <hauke@hauke-m.de>
To: "Rafał Miłecki" <zajec5@gmail.com>,
	miquel.raynal@bootlin.com, richard@nod.at, vigneshr@ti.com,
	robh+dt@kernel.org
Cc: linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
	rafal@milecki.pl, musashino.open@gmail.com
Subject: Re: [PATCH 1/2] mtd: parsers: trx: Allow to specify trx-magic in DT
Date: Sun, 18 Apr 2021 18:59:08 +0200	[thread overview]
Message-ID: <a1c7bdbf-8975-94d7-ce93-de45f7104a32@hauke-m.de> (raw)
In-Reply-To: <c596dbe2-a948-81c4-1e4e-e2d6c1b58b44@gmail.com>

On 3/18/21 7:43 AM, Rafał Miłecki wrote:
> On 15.03.2021 18:07, Hauke Mehrtens wrote:
>> Buffalo uses a different TRX magic for every device, to be able to use
>> this trx parser, make it possible to specify the TRX magic in device
>> tree. If no TRX magic is specified in device tree, the standard value
>> will be used. This value should only be specified if a vendor chooses to
>> use a non standard TRX magic.
>>
>> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
>> ---
>>   .../bindings/mtd/partitions/brcm,trx.txt      |  5 +++++
>>   drivers/mtd/parsers/parser_trx.c              | 21 ++++++++++++++++++-
>>   2 files changed, 25 insertions(+), 1 deletion(-)
>>
>> diff --git 
>> a/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt 
>> b/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt
>> index b677147ca4e1..715a18ca36bd 100644
>> --- a/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt
>> +++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt
>> @@ -28,6 +28,11 @@ detected by a software parsing TRX header.
>>   Required properties:
>>   - compatible : (required) must be "brcm,trx"
>> +Optional properties:
>> +
>> +- trx-magic: TRX magic, if it is different from the default magic
>> +         0x30524448 as a u32.
> 
> It may need to be brcm,trx-magic and ack for sending a separated 
> bt-bindings patch.

Ok, I will rename it to brcm,trx-magic.

>> diff --git a/drivers/mtd/parsers/parser_trx.c 
>> b/drivers/mtd/parsers/parser_trx.c
>> index 8541182134d4..fd424587caa4 100644
>> --- a/drivers/mtd/parsers/parser_trx.c
>> +++ b/drivers/mtd/parsers/parser_trx.c
>> @@ -47,6 +47,24 @@ static const char *parser_trx_data_part_name(struct 
>> mtd_info *master,
>>       return "rootfs";
>>   }
>> +static uint32_t parser_trx_get_magic(struct mtd_info *mtd)
>> +{
>> +    uint32_t trx_magic = TRX_MAGIC;
>> +    struct device_node *np;
>> +    int err;
>> +
>> +    np = mtd_get_of_node(mtd);
>> +    if (!np)
>> +        return trx_magic;
> 
> This check seems redundant, of_ returns -EINVAL also for NULL node.

Thanks for the information, I will remove this check. Then it could also 
be easier to just inline this code.

> 
> 
>> +    /* Get different magic from device tree if specified */
>> +    err = of_property_read_u32(np, "trx-magic", &trx_magic);
>> +    if (err != 0 && err != -EINVAL)
>> +        pr_err("failed to parse \"trx-magic\" DT attribute, use 
>> default: %d\n", err);
> 
> I'm not native, but shouldn't that be s/use/using/ ?

I am also not a native speaker, but I agree with you and will change this.

Hauke

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2021-04-18 16:59 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-15 17:07 [PATCH 0/2] mtd: parsers: trx: Add support for Buffalo WSR-2533DHP2 Hauke Mehrtens
2021-03-15 17:07 ` [PATCH 1/2] mtd: parsers: trx: Allow to specify trx-magic in DT Hauke Mehrtens
2021-03-17  9:25   ` Miquel Raynal
2021-04-18 16:53     ` Hauke Mehrtens
2021-03-18  6:43   ` Rafał Miłecki
2021-04-18 16:59     ` Hauke Mehrtens [this message]
2021-03-15 17:07 ` [PATCH 2/2] mtd: parsers: trx: Remove dependency to BRCM architectures Hauke Mehrtens
2021-03-18  6:45   ` Rafał Miłecki
2021-04-18 17:03     ` Hauke Mehrtens

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a1c7bdbf-8975-94d7-ce93-de45f7104a32@hauke-m.de \
    --to=hauke@hauke-m.de \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=musashino.open@gmail.com \
    --cc=rafal@milecki.pl \
    --cc=richard@nod.at \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    --cc=zajec5@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).