From: Guenter Roeck <linux@roeck-us.net>
To: Rob Herring <robh@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>,
Ulf Hansson <ulf.hansson@linaro.org>,
linux-usb@vger.kernel.org,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Sam Ravnborg <sam@ravnborg.org>,
linux-pwm@vger.kernel.org, linux-iio@vger.kernel.org,
Viresh Kumar <vireshk@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
linux-pci@vger.kernel.org, dri-devel@lists.freedesktop.org,
Sebastian Reichel <sre@kernel.org>,
linux-ide@vger.kernel.org,
Thierry Reding <thierry.reding@gmail.com>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Pavel Machek <pavel@ucw.cz>,
Miquel Raynal <miquel.raynal@bootlin.com>,
linux-riscv@lists.infradead.org, Lee Jones <lee.jones@linaro.org>,
linux-clk@vger.kernel.org, linux-leds@vger.kernel.org,
Vignesh Raghavendra <vigneshr@ti.com>,
linux-rtc@vger.kernel.org, Lars-Peter Clausen <lars@metafoo.de>,
Marc Zyngier <maz@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Chanwoo Choi <cw00.choi@samsung.com>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
linux-serial@vger.kernel.org, linux-input@vger.kernel.org,
Jakub Kicinski <kuba@kernel.org>, Zhang Rui <rui.zhang@intel.com>,
linux-mips@vger.kernel.org,
Vivien Didelot <vivien.didelot@gmail.com>,
Wolfgang Grandegger <wg@grandegger.com>,
linux-media@vger.kernel.org, linux-hwmon@vger.kernel.org,
Albert Ou <aou@eecs.berkeley.edu>,
Jason Cooper <jason@lakedaemon.net>,
linux-pm@vger.kernel.org, linux-can@vger.kernel.org,
linux-gpio@vger.kernel.org, Mark Brown <broonie@kernel.org>,
Marc Kleine-Budde <mkl@pengutronix.de>,
Paul Walmsley <paul.walmsley@sifive.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Thomas Gleixner <tglx@linutronix.de>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-arm-kernel@lists.infradead.org,
Jens Axboe <axboe@kernel.dk>,
Alessandro Zummo <a.zummo@towertech.it>,
linux-watchdog@vger.kernel.org,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Stephen Boyd <sboyd@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
linux-mmc@vger.kernel.org, Liam Girdwood <lgirdwood@gmail.com>,
linux-spi@vger.kernel.org, linux-i2c@vger.kernel.org,
Vinod Koul <vkoul@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
Richard Weinberger <richard@nod.at>,
dmaengine@vger.kernel.org, linux-mtd@lists.infradead.org,
"David S. Miller" <davem@davemloft.net>,
Jonathan Cameron <jic23@kernel.org>,
Heiner Kallweit <hkallweit1@gmail.com>
Subject: Re: [PATCH 2/4] dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties'
Date: Tue, 6 Oct 2020 07:32:20 -0700
Message-ID: <d0ebc3f9-3497-3718-4b61-bd50b0fa0d5b@roeck-us.net> (raw)
In-Reply-To: <20201005183830.486085-3-robh@kernel.org>
On 10/5/20 11:38 AM, Rob Herring wrote:
> In cases where we don't reference another schema, 'additionalProperties'
> can be used instead. This is preferred for now as 'unevaluatedProperties'
> support isn't implemented yet.
>
> In a few cases, this means adding some missing property definitions of
> which most are for SPI bus properties. 'unevaluatedProperties' is not going
> to work for the SPI bus properties anyways as they are evaluated from the
> parent node, not the SPI child node.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> .../devicetree/bindings/clock/baikal,bt1-ccu-div.yaml | 6 +++++-
> .../devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml | 2 +-
> .../devicetree/bindings/clock/imx8m-clock.yaml | 2 +-
> .../devicetree/bindings/hwmon/baikal,bt1-pvt.yaml | 4 ++--
For hwmon:
Acked-by: Guenter Roeck <linux@roeck-us.net>
> .../devicetree/bindings/iio/accel/adi,adis16240.yaml | 4 +++-
> .../devicetree/bindings/iio/accel/adi,adxl345.yaml | 4 +++-
> .../devicetree/bindings/iio/accel/adi,adxl372.yaml | 4 +++-
> .../devicetree/bindings/iio/adc/adi,ad7124.yaml | 4 +++-
> .../devicetree/bindings/iio/adc/adi,ad7192.yaml | 4 +++-
> .../devicetree/bindings/iio/adc/adi,ad7292.yaml | 4 +++-
> .../devicetree/bindings/iio/adc/adi,ad7606.yaml | 6 +++++-
> .../devicetree/bindings/iio/adc/adi,ad7923.yaml | 4 +++-
> .../devicetree/bindings/iio/adc/maxim,max1241.yaml | 4 +++-
> .../devicetree/bindings/iio/dac/adi,ad5770r.yaml | 10 +++++++++-
> .../devicetree/bindings/iio/frequency/adf4371.yaml | 4 +++-
> .../devicetree/bindings/iio/imu/adi,adis16460.yaml | 4 +++-
> .../devicetree/bindings/iio/imu/adi,adis16475.yaml | 2 +-
> .../devicetree/bindings/iio/imu/bosch,bmi160.yaml | 4 +++-
> .../devicetree/bindings/iio/imu/nxp,fxos8700.yaml | 4 +++-
> .../bindings/interrupt-controller/mti,gic.yaml | 2 +-
> .../devicetree/bindings/mfd/cirrus,lochnagar.yaml | 10 +++++++++-
> .../bindings/mfd/ti,j721e-system-controller.yaml | 5 ++++-
> .../devicetree/bindings/misc/olpc,xo1.75-ec.yaml | 4 +++-
> .../opp/allwinner,sun50i-h6-operating-points.yaml | 4 +++-
> .../bindings/regulator/qcom-labibb-regulator.yaml | 2 +-
> .../devicetree/bindings/timer/snps,dw-apb-timer.yaml | 2 +-
> 26 files changed, 82 insertions(+), 27 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml
> index 2821425ee445..bd4cefbb1244 100644
> --- a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml
> +++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml
> @@ -134,7 +134,11 @@ properties:
> "#reset-cells":
> const: 1
>
> -unevaluatedProperties: false
> + clocks: true
> +
> + clock-names: true
> +
> +additionalProperties: false
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
> index 97131bfa6f87..624984d51c10 100644
> --- a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
> +++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
> @@ -101,7 +101,7 @@ properties:
> clock-names:
> const: ref_clk
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
> index 31e7cc9693c3..625f573a7b90 100644
> --- a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
> +++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
> @@ -96,7 +96,7 @@ allOf:
> - const: clk_ext3
> - const: clk_ext4
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> examples:
> # Clock Control Module node:
> diff --git a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
> index 84ae4cdd08ed..00a6511354e6 100644
> --- a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
> @@ -79,7 +79,7 @@ properties:
> minimum: 0
> maximum: 7130
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> required:
> - compatible
> @@ -99,7 +99,7 @@ examples:
>
> interrupts = <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>;
>
> - baikal,pvt-temp-trim-millicelsius = <1000>;
> + baikal,pvt-temp-offset-millicelsius = <1000>;
>
> clocks = <&ccu_sys>, <&ccu_sys>;
> clock-names = "ref", "pclk";
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
> index 8589b722028d..4fcbfd93e218 100644
> --- a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
> @@ -25,12 +25,14 @@ properties:
> interrupts:
> maxItems: 1
>
> + spi-max-frequency: true
> +
> required:
> - compatible
> - reg
> - interrupts
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> index 591ca32181b0..11d32a288535 100644
> --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> @@ -32,6 +32,8 @@ properties:
>
> spi-cpol: true
>
> + spi-max-frequency: true
> +
> interrupts:
> maxItems: 1
>
> @@ -40,7 +42,7 @@ required:
> - reg
> - interrupts
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
> index 64f275c8e2d9..38b59b6454ce 100644
> --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
> @@ -25,12 +25,14 @@ properties:
> interrupts:
> maxItems: 1
>
> + spi-max-frequency: true
> +
> required:
> - compatible
> - reg
> - interrupts
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
> index d0d2880626c2..f1c574c896cb 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
> @@ -52,6 +52,8 @@ properties:
> avdd-supply:
> description: avdd supply can be used as reference for conversion.
>
> + spi-max-frequency: true
> +
> required:
> - compatible
> - reg
> @@ -108,7 +110,7 @@ patternProperties:
> - reg
> - diff-channels
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
> index ed363a796e50..e0cc3b2e8957 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
> @@ -30,6 +30,8 @@ properties:
>
> spi-cpha: true
>
> + spi-max-frequency: true
> +
> clocks:
> maxItems: 1
> description: phandle to the master clock (mclk)
> @@ -92,7 +94,7 @@ required:
> - spi-cpol
> - spi-cpha
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
> index 55e973c6449c..108d202b288f 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
> @@ -30,6 +30,8 @@ properties:
>
> spi-cpha: true
>
> + spi-max-frequency: true
> +
> '#address-cells':
> const: 1
>
> @@ -63,7 +65,7 @@ patternProperties:
> required:
> - reg
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
> index 014b020ed0c2..73775174cf57 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
> @@ -31,6 +31,10 @@ properties:
>
> spi-cpha: true
>
> + spi-cpol: true
> +
> + spi-max-frequency: true
> +
> avcc-supply: true
>
> interrupts:
> @@ -102,7 +106,7 @@ required:
> - interrupts
> - adi,conversion-start-gpios
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
> index 2a17641faed5..e82194974eea 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
> @@ -43,11 +43,13 @@ properties:
> '#size-cells':
> const: 0
>
> + spi-max-frequency: true
> +
> required:
> - compatible
> - reg
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
> index 181213b862db..4c7e0d94bff1 100644
> --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
> @@ -39,13 +39,15 @@ properties:
> thus enabling power-down mode.
> maxItems: 1
>
> + spi-max-frequency: true
> +
> required:
> - compatible
> - reg
> - vdd-supply
> - vref-supply
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
> index faef288b7148..fb2c48fc7ce4 100644
> --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
> +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
> @@ -49,6 +49,14 @@ properties:
> asserted during driver probe.
> maxItems: 1
>
> + spi-max-frequency: true
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> channel@0:
> description: Represents an external channel which are
> connected to the DAC. Channel 0 can act both as a current
> @@ -130,7 +138,7 @@ required:
> - channel@4
> - channel@5
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
> index 11d445f7010e..6b3a611e1cf1 100644
> --- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
> +++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
> @@ -40,13 +40,15 @@ properties:
> output stage will shut down until the ADF4371/ADF4372 achieves lock as
> measured by the digital lock detect circuitry.
>
> + spi-max-frequency: true
> +
> required:
> - compatible
> - reg
> - clocks
> - clock-names
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
> index 07c8ed4ee0f1..340be256f283 100644
> --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
> +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
> @@ -25,6 +25,8 @@ properties:
>
> spi-cpol: true
>
> + spi-max-frequency: true
> +
> interrupts:
> maxItems: 1
>
> @@ -33,7 +35,7 @@ required:
> - reg
> - interrupts
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
> index c29385697bbf..79fba1508e89 100644
> --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
> +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
> @@ -116,7 +116,7 @@ allOf:
> dependencies:
> adi,sync-mode: [ clocks ]
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
> index 4f215399c8df..6e73cd889b5c 100644
> --- a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
> +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
> @@ -46,11 +46,13 @@ properties:
> mount-matrix:
> description: an optional 3x3 mounting rotation matrix
>
> + spi-max-frequency: true
> +
> required:
> - compatible
> - reg
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
> index 716731c2b794..479e7065d4eb 100644
> --- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
> +++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
> @@ -36,11 +36,13 @@ properties:
> drive-open-drain:
> type: boolean
>
> + spi-max-frequency: true
> +
> required:
> - compatible
> - reg
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
> index ce6aaff15214..039e08af98bb 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
> +++ b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
> @@ -95,7 +95,7 @@ properties:
>
> additionalProperties: false
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
> index 7a616577ac63..c00ad3e21c21 100644
> --- a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
> +++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
> @@ -130,6 +130,14 @@ properties:
> type: object
> $ref: /schemas/pinctrl/cirrus,lochnagar.yaml#
>
> + lochnagar-hwmon:
> + type: object
> + $ref: /schemas/hwmon/cirrus,lochnagar.yaml#
> +
> + lochnagar-sc:
> + type: object
> + $ref: /schemas/sound/cirrus,lochnagar.yaml#
> +
> VDDCORE:
> description:
> Initialisation data for the VDDCORE regulator, which supplies the
> @@ -249,7 +257,7 @@ required:
> - lochnagar-clk
> - lochnagar-pinctrl
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> index da3d9ab758b9..19fcf59fd2fe 100644
> --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> @@ -30,6 +30,9 @@ properties:
> - const: syscon
> - const: simple-mfd
>
> + reg:
> + maxItems: 1
> +
> "#address-cells":
> const: 1
>
> @@ -54,7 +57,7 @@ required:
> - "#size-cells"
> - ranges
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
> index e75d77beec6a..ade733cd60f7 100644
> --- a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
> +++ b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
> @@ -28,11 +28,13 @@ properties:
> description: GPIO uspecifier of the CMD pin
> maxItems: 1
>
> + spi-cpha: true
> +
> required:
> - compatible
> - cmd-gpios
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
> index aef87a33a7c9..aeff2bd774dd 100644
> --- a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
> +++ b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
> @@ -31,6 +31,8 @@ properties:
> Documentation/devicetree/bindings/nvmem/nvmem.txt and also
> examples below.
>
> + opp-shared: true
> +
> required:
> - compatible
> - nvmem-cells
> @@ -53,7 +55,7 @@ patternProperties:
>
> unevaluatedProperties: false
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
> index fb111e2d5b99..53853ec20fe2 100644
> --- a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
> @@ -47,7 +47,7 @@ properties:
> required:
> - compatible
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml b/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml
> index 7b39e3204fb3..2fc617377e2c 100644
> --- a/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml
> +++ b/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml
> @@ -45,7 +45,7 @@ properties:
> frequency in HZ, but is defined only for the backwards compatibility
> with the picoxcell platform.
>
> -unevaluatedProperties: false
> +additionalProperties: false
>
> required:
> - compatible
>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply index
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-05 18:38 [PATCH 0/4] dt-bindings: additional/unevaluatedProperties clean-ups Rob Herring
2020-10-05 18:38 ` [PATCH 1/4] dt-bindings: Add missing 'unevaluatedProperties' Rob Herring
2020-10-05 20:01 ` Mark Brown
2020-10-05 20:29 ` Wolfram Sang
2020-10-05 20:31 ` Krzysztof Kozlowski
2020-10-06 5:29 ` Vinod Koul
2020-10-06 7:37 ` Geert Uytterhoeven
2020-10-06 9:12 ` Ulf Hansson
2020-10-06 14:33 ` Guenter Roeck
2020-10-06 16:57 ` Mathieu Poirier
2020-10-07 1:03 ` Dmitry Torokhov
2020-10-07 22:48 ` Alexandre Belloni
2020-10-05 18:38 ` [PATCH 2/4] dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties' Rob Herring
2020-10-05 20:02 ` Mark Brown
2020-10-05 20:33 ` Krzysztof Kozlowski
2020-10-06 6:59 ` Lee Jones
2020-10-06 9:58 ` Jonathan Cameron
2020-10-06 14:32 ` Guenter Roeck [this message]
2020-10-05 18:38 ` [PATCH 3/4] dt-bindings: Explicitly allow additional properties in board/SoC schemas Rob Herring
2020-10-05 20:34 ` Krzysztof Kozlowski
2020-10-06 5:42 ` Viresh Kumar
2020-10-06 7:42 ` Geert Uytterhoeven
2020-10-05 18:38 ` [PATCH 4/4] dt-bindings: Explicitly allow additional properties in common schemas Rob Herring
2020-10-05 20:04 ` Mark Brown
2020-10-05 20:35 ` Krzysztof Kozlowski
2020-10-05 20:55 ` Sebastian Reichel
2020-10-06 1:23 ` Chanwoo Choi
2020-10-06 5:30 ` Vinod Koul
2020-10-06 6:58 ` Lee Jones
2020-10-06 7:43 ` Geert Uytterhoeven
2020-10-06 8:22 ` Srinivas Kandagatla
2020-10-06 9:12 ` Ulf Hansson
2020-10-06 10:00 ` Jonathan Cameron
2020-10-06 14:30 ` Guenter Roeck
2020-10-07 1:04 ` Dmitry Torokhov
2020-10-07 22:40 ` Alexandre Belloni
2020-10-06 8:25 ` [PATCH 0/4] dt-bindings: additional/unevaluatedProperties clean-ups Srinivas Kandagatla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d0ebc3f9-3497-3718-4b61-bd50b0fa0d5b@roeck-us.net \
--to=linux@roeck-us.net \
--cc=a.zummo@towertech.it \
--cc=andrew@lunn.ch \
--cc=aou@eecs.berkeley.edu \
--cc=axboe@kernel.dk \
--cc=bhelgaas@google.com \
--cc=broonie@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=daniel.lezcano@linaro.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=gregkh@linuxfoundation.org \
--cc=hkallweit1@gmail.com \
--cc=jason@lakedaemon.net \
--cc=jic23@kernel.org \
--cc=krzk@kernel.org \
--cc=kuba@kernel.org \
--cc=lars@metafoo.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-rtc@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=maz@kernel.org \
--cc=mchehab@kernel.org \
--cc=miquel.raynal@bootlin.com \
--cc=mkl@pengutronix.de \
--cc=myungjoo.ham@samsung.com \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=pavel@ucw.cz \
--cc=pmeerw@pmeerw.net \
--cc=richard@nod.at \
--cc=robh@kernel.org \
--cc=rui.zhang@intel.com \
--cc=sam@ravnborg.org \
--cc=sboyd@kernel.org \
--cc=sre@kernel.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
--cc=tsbogend@alpha.franken.de \
--cc=ulf.hansson@linaro.org \
--cc=vigneshr@ti.com \
--cc=vireshk@kernel.org \
--cc=vivien.didelot@gmail.com \
--cc=vkoul@kernel.org \
--cc=wg@grandegger.com \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Linux-mtd Archive on lore.kernel.org
Archives are clonable:
git clone --mirror https://lore.kernel.org/linux-mtd/0 linux-mtd/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 linux-mtd linux-mtd/ https://lore.kernel.org/linux-mtd \
linux-mtd@lists.infradead.org
public-inbox-index linux-mtd
Example config snippet for mirrors
Newsgroup available over NNTP:
nntp://nntp.lore.kernel.org/org.infradead.lists.linux-mtd
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git