From: Pratik Rajesh Sampat <psampat@linux.ibm.com>
To: linuxppc-dev@ozlabs.org, linux-next@vger.kernel.org,
mpe@ellerman.id.au, svaidy@linux.ibm.com, ego@linux.vnet.ibm.com,
premjha2@in.ibm.com, akshay.adiga@linux.vnet.ibm.com
Subject: [PATCH v1 2/3] powerpc/powernv: Introduce Self save support
Date: Thu, 10 Oct 2019 17:28:42 +0530 [thread overview]
Message-ID: <20191010115843.22283-3-psampat@linux.ibm.com> (raw)
In-Reply-To: <20191010115843.22283-1-psampat@linux.ibm.com>
This commit introduces and leverages the Self save API which OPAL now
supports.
Add the new Self Save OPAL API call in the list of OPAL calls.
Implement the self saving of the SPRs based on the support populated
while respecting it's preferences.
This implementation allows mixing of support for the SPRs, which
means that a SPR can be self restored while another SPR be self saved if
they support and prefer it to be so.
Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
---
arch/powerpc/include/asm/opal-api.h | 3 ++-
arch/powerpc/include/asm/opal.h | 1 +
arch/powerpc/platforms/powernv/idle.c | 16 ++++++++++++++++
arch/powerpc/platforms/powernv/opal-call.c | 1 +
4 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index 383242eb0dea..4ee1641c60a4 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -208,7 +208,8 @@
#define OPAL_HANDLE_HMI2 166
#define OPAL_NX_COPROC_INIT 167
#define OPAL_XIVE_GET_VP_STATE 170
-#define OPAL_LAST 170
+#define OPAL_SLW_SELF_SAVE_REG 173
+#define OPAL_LAST 173
#define QUIESCE_HOLD 1 /* Spin all calls at entry */
#define QUIESCE_REJECT 2 /* Fail all calls with OPAL_BUSY */
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 57bd029c715e..832eff21d189 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -202,6 +202,7 @@ int64_t opal_handle_hmi(void);
int64_t opal_handle_hmi2(__be64 *out_flags);
int64_t opal_register_dump_region(uint32_t id, uint64_t start, uint64_t end);
int64_t opal_unregister_dump_region(uint32_t id);
+int64_t opal_slw_self_save_reg(uint64_t cpu_pir, uint64_t sprn);
int64_t opal_slw_set_reg(uint64_t cpu_pir, uint64_t sprn, uint64_t val);
int64_t opal_config_cpu_idle_state(uint64_t state, uint64_t flag);
int64_t opal_pci_set_phb_cxl_mode(uint64_t phb_id, uint64_t mode, uint64_t pe_number);
diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index 00b3fd58fafc..f0dd377820c7 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -264,6 +264,20 @@ static int pnv_self_save_restore_sprs(void)
if (rc != 0)
return rc;
break;
+ } else if (preferred & curr_spr.supported_mode
+ & SELF_SAVE_STRICT) {
+ is_initialized = true;
+ if (curr_spr.spr == SPRN_HMEER &&
+ cpu_thread_in_core(cpu) != 0) {
+ continue;
+ }
+ if (curr_spr.spr == SPRN_LPCR)
+ is_lpcr_self_save = true;
+ rc = opal_slw_self_save_reg(pir,
+ curr_spr.spr);
+ if (rc != 0)
+ return rc;
+ break;
}
preferred_sprs[index].preferred_mode =
preferred_sprs[index].preferred_mode >>
@@ -1137,6 +1151,8 @@ void pnv_program_cpu_hotplug_lpcr(unsigned int cpu, u64 lpcr_val)
if (!is_lpcr_self_save)
opal_slw_set_reg(pir, SPRN_LPCR,
lpcr_val);
+ else
+ opal_slw_self_save_reg(pir, SPRN_LPCR);
}
}
diff --git a/arch/powerpc/platforms/powernv/opal-call.c b/arch/powerpc/platforms/powernv/opal-call.c
index 29ca523c1c79..716f2118939b 100644
--- a/arch/powerpc/platforms/powernv/opal-call.c
+++ b/arch/powerpc/platforms/powernv/opal-call.c
@@ -223,6 +223,7 @@ OPAL_CALL(opal_handle_hmi, OPAL_HANDLE_HMI);
OPAL_CALL(opal_handle_hmi2, OPAL_HANDLE_HMI2);
OPAL_CALL(opal_config_cpu_idle_state, OPAL_CONFIG_CPU_IDLE_STATE);
OPAL_CALL(opal_slw_set_reg, OPAL_SLW_SET_REG);
+OPAL_CALL(opal_slw_self_save_reg, OPAL_SLW_SELF_SAVE_REG);
OPAL_CALL(opal_register_dump_region, OPAL_REGISTER_DUMP_REGION);
OPAL_CALL(opal_unregister_dump_region, OPAL_UNREGISTER_DUMP_REGION);
OPAL_CALL(opal_pci_set_phb_cxl_mode, OPAL_PCI_SET_PHB_CAPI_MODE);
--
2.21.0
next prev parent reply other threads:[~2019-10-10 11:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-10 11:58 [PATCH v1 0/3] Integrate support for Self save, determine support and preference for self save or restore Pratik Rajesh Sampat
2019-10-10 11:58 ` [PATCH v1 1/3] powerpc/powernv: Interface to define support and preference for a SPR Pratik Rajesh Sampat
2019-10-10 11:58 ` Pratik Rajesh Sampat [this message]
2019-10-10 11:58 ` [PATCH v1 3/3] powerpc/powernv: Parse device tree, population of SPR support Pratik Rajesh Sampat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191010115843.22283-3-psampat@linux.ibm.com \
--to=psampat@linux.ibm.com \
--cc=akshay.adiga@linux.vnet.ibm.com \
--cc=ego@linux.vnet.ibm.com \
--cc=linux-next@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=premjha2@in.ibm.com \
--cc=svaidy@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).