linux-next.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* linux-next: manual merge of the mhi tree with the net-next tree
@ 2021-07-16  3:37 Stephen Rothwell
  2021-07-16  3:42 ` Stephen Rothwell
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Stephen Rothwell @ 2021-07-16  3:37 UTC (permalink / raw)
  To: Manivannan Sadhasivam, David Miller, Networking
  Cc: Bhaumik Bhatt, Linux Kernel Mailing List,
	Linux Next Mailing List, Manivannan Sadhasivam, Richard Laing

[-- Attachment #1: Type: text/plain, Size: 2704 bytes --]

Hi all,

Today's linux-next merge of the mhi tree got a conflict in:

  drivers/bus/mhi/pci_generic.c

between commit:

  5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU")

from the net-next tree and commit:

  156ffb7fb7eb ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean")

from the mhi tree.

I fixed it up (see below) and can carry the fix as necessary. This
is now fixed as far as linux-next is concerned, but any non trivial
conflicts should be mentioned to your upstream maintainer when your tree
is submitted for merging.  You may also want to consider cooperating
with the maintainer of the conflicting tree to minimise any particularly
complex conflicts.

-- 
Cheers,
Stephen Rothwell

diff --cc drivers/bus/mhi/pci_generic.c
index 19413daa0917,8bc6149249e3..000000000000
--- a/drivers/bus/mhi/pci_generic.c
+++ b/drivers/bus/mhi/pci_generic.c
@@@ -32,7 -32,8 +32,9 @@@
   * @edl: emergency download mode firmware path (if any)
   * @bar_num: PCI base address register to use for MHI MMIO register space
   * @dma_data_width: DMA transfer word size (32 or 64 bits)
 + * @mru_default: default MRU size for MBIM network packets
+  * @sideband_wake: Devices using dedicated sideband GPIO for wakeup instead
+  *		   of inband wake support (such as sdx24)
   */
  struct mhi_pci_dev_info {
  	const struct mhi_controller_config *config;
@@@ -41,7 -42,7 +43,8 @@@
  	const char *edl;
  	unsigned int bar_num;
  	unsigned int dma_data_width;
 +	unsigned int mru_default;
+ 	bool sideband_wake;
  };
  
  #define MHI_CHANNEL_CONFIG_UL(ch_num, ch_name, el_count, ev_ring) \
@@@ -254,7 -256,7 +258,8 @@@ static const struct mhi_pci_dev_info mh
  	.config = &modem_qcom_v1_mhiv_config,
  	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
  	.dma_data_width = 32,
 +	.mru_default = 32768
+ 	.sideband_wake = false,
  };
  
  static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = {
@@@ -643,11 -686,13 +689,14 @@@ static int mhi_pci_probe(struct pci_de
  	mhi_cntrl->status_cb = mhi_pci_status_cb;
  	mhi_cntrl->runtime_get = mhi_pci_runtime_get;
  	mhi_cntrl->runtime_put = mhi_pci_runtime_put;
- 	mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
- 	mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
- 	mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
 +	mhi_cntrl->mru = info->mru_default;
  
+ 	if (info->sideband_wake) {
+ 		mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
+ 		mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
+ 		mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
+ 	}
+ 
  	err = mhi_pci_claim(mhi_cntrl, info->bar_num, DMA_BIT_MASK(info->dma_data_width));
  	if (err)
  		return err;

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: linux-next: manual merge of the mhi tree with the net-next tree
  2021-07-16  3:37 linux-next: manual merge of the mhi tree with the net-next tree Stephen Rothwell
@ 2021-07-16  3:42 ` Stephen Rothwell
  2021-07-16  3:46 ` Manivannan Sadhasivam
  2021-07-22  4:33 ` Stephen Rothwell
  2 siblings, 0 replies; 6+ messages in thread
From: Stephen Rothwell @ 2021-07-16  3:42 UTC (permalink / raw)
  To: Manivannan Sadhasivam, David Miller, Networking
  Cc: Bhaumik Bhatt, Linux Kernel Mailing List,
	Linux Next Mailing List, Manivannan Sadhasivam, Richard Laing

[-- Attachment #1: Type: text/plain, Size: 443 bytes --]

Hi all,

On Fri, 16 Jul 2021 13:37:38 +1000 Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>
> @@@ -254,7 -256,7 +258,8 @@@ static const struct mhi_pci_dev_info mh
>   	.config = &modem_qcom_v1_mhiv_config,
>   	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
>   	.dma_data_width = 32,
>  +	.mru_default = 32768
> + 	.sideband_wake = false,
>   };

I added the missing ',' after the mru_default line above.

-- 
Cheers,
Stephen Rothwell

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: linux-next: manual merge of the mhi tree with the net-next tree
  2021-07-16  3:37 linux-next: manual merge of the mhi tree with the net-next tree Stephen Rothwell
  2021-07-16  3:42 ` Stephen Rothwell
@ 2021-07-16  3:46 ` Manivannan Sadhasivam
  2021-07-16  4:04   ` Manivannan Sadhasivam
  2021-07-22  4:33 ` Stephen Rothwell
  2 siblings, 1 reply; 6+ messages in thread
From: Manivannan Sadhasivam @ 2021-07-16  3:46 UTC (permalink / raw)
  To: Stephen Rothwell
  Cc: David Miller, Networking, Bhaumik Bhatt,
	Linux Kernel Mailing List, Linux Next Mailing List,
	Richard Laing

Hi Stephen,

On Fri, Jul 16, 2021 at 01:37:38PM +1000, Stephen Rothwell wrote:
> Hi all,
> 
> Today's linux-next merge of the mhi tree got a conflict in:
> 
>   drivers/bus/mhi/pci_generic.c
> 
> between commit:
> 
>   5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU")
> 

Ah, this one was never submitted to "linux-arm-msm" mailing list nor to
me. I'm surprised that networking maintainers merged this patch without
getting an Ack from me as it touches MHI bus :/

> from the net-next tree and commit:
> 
>   156ffb7fb7eb ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean")
> 
> from the mhi tree.
> 
> I fixed it up (see below) and can carry the fix as necessary. This
> is now fixed as far as linux-next is concerned, but any non trivial
> conflicts should be mentioned to your upstream maintainer when your tree
> is submitted for merging.  You may also want to consider cooperating
> with the maintainer of the conflicting tree to minimise any particularly
> complex conflicts.
> 

This change should've been taken via immutable branch between mhi-next
and net-next or via mhi tree. Because, we have more changes coming in for
pci-generic driver in MHI tree.

Dave, since this patch is in your tree, what do you suggest?

Thanks,
Mani

> -- 
> Cheers,
> Stephen Rothwell
> 
> diff --cc drivers/bus/mhi/pci_generic.c
> index 19413daa0917,8bc6149249e3..000000000000
> --- a/drivers/bus/mhi/pci_generic.c
> +++ b/drivers/bus/mhi/pci_generic.c
> @@@ -32,7 -32,8 +32,9 @@@
>    * @edl: emergency download mode firmware path (if any)
>    * @bar_num: PCI base address register to use for MHI MMIO register space
>    * @dma_data_width: DMA transfer word size (32 or 64 bits)
>  + * @mru_default: default MRU size for MBIM network packets
> +  * @sideband_wake: Devices using dedicated sideband GPIO for wakeup instead
> +  *		   of inband wake support (such as sdx24)
>    */
>   struct mhi_pci_dev_info {
>   	const struct mhi_controller_config *config;
> @@@ -41,7 -42,7 +43,8 @@@
>   	const char *edl;
>   	unsigned int bar_num;
>   	unsigned int dma_data_width;
>  +	unsigned int mru_default;
> + 	bool sideband_wake;
>   };
>   
>   #define MHI_CHANNEL_CONFIG_UL(ch_num, ch_name, el_count, ev_ring) \
> @@@ -254,7 -256,7 +258,8 @@@ static const struct mhi_pci_dev_info mh
>   	.config = &modem_qcom_v1_mhiv_config,
>   	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
>   	.dma_data_width = 32,
>  +	.mru_default = 32768
> + 	.sideband_wake = false,
>   };
>   
>   static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = {
> @@@ -643,11 -686,13 +689,14 @@@ static int mhi_pci_probe(struct pci_de
>   	mhi_cntrl->status_cb = mhi_pci_status_cb;
>   	mhi_cntrl->runtime_get = mhi_pci_runtime_get;
>   	mhi_cntrl->runtime_put = mhi_pci_runtime_put;
> - 	mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
> - 	mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
> - 	mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
>  +	mhi_cntrl->mru = info->mru_default;
>   
> + 	if (info->sideband_wake) {
> + 		mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
> + 		mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
> + 		mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
> + 	}
> + 
>   	err = mhi_pci_claim(mhi_cntrl, info->bar_num, DMA_BIT_MASK(info->dma_data_width));
>   	if (err)
>   		return err;



^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: linux-next: manual merge of the mhi tree with the net-next tree
  2021-07-16  3:46 ` Manivannan Sadhasivam
@ 2021-07-16  4:04   ` Manivannan Sadhasivam
  0 siblings, 0 replies; 6+ messages in thread
From: Manivannan Sadhasivam @ 2021-07-16  4:04 UTC (permalink / raw)
  To: Stephen Rothwell
  Cc: David Miller, Networking, Bhaumik Bhatt,
	Linux Kernel Mailing List, Linux Next Mailing List,
	Richard Laing

On Fri, Jul 16, 2021 at 09:16:22AM +0530, Manivannan Sadhasivam wrote:
> Hi Stephen,
> 
> On Fri, Jul 16, 2021 at 01:37:38PM +1000, Stephen Rothwell wrote:
> > Hi all,
> > 
> > Today's linux-next merge of the mhi tree got a conflict in:
> > 
> >   drivers/bus/mhi/pci_generic.c
> > 
> > between commit:
> > 
> >   5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU")
> > 
> 
> Ah, this one was never submitted to "linux-arm-msm" mailing list nor to
> me. I'm surprised that networking maintainers merged this patch without
> getting an Ack from me as it touches MHI bus :/
> 
> > from the net-next tree and commit:
> > 
> >   156ffb7fb7eb ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean")
> > 
> > from the mhi tree.
> > 
> > I fixed it up (see below) and can carry the fix as necessary. This
> > is now fixed as far as linux-next is concerned, but any non trivial
> > conflicts should be mentioned to your upstream maintainer when your tree
> > is submitted for merging.  You may also want to consider cooperating
> > with the maintainer of the conflicting tree to minimise any particularly
> > complex conflicts.
> > 
> 
> This change should've been taken via immutable branch between mhi-next
> and net-next or via mhi tree. Because, we have more changes coming in for
> pci-generic driver in MHI tree.
> 
> Dave, since this patch is in your tree, what do you suggest?
> 

Btw, I do have a comment about the patch. So it shouldn't be merged as
it is.

Thanks,
Mani

> Thanks,
> Mani
> 
> > -- 
> > Cheers,
> > Stephen Rothwell
> > 
> > diff --cc drivers/bus/mhi/pci_generic.c
> > index 19413daa0917,8bc6149249e3..000000000000
> > --- a/drivers/bus/mhi/pci_generic.c
> > +++ b/drivers/bus/mhi/pci_generic.c
> > @@@ -32,7 -32,8 +32,9 @@@
> >    * @edl: emergency download mode firmware path (if any)
> >    * @bar_num: PCI base address register to use for MHI MMIO register space
> >    * @dma_data_width: DMA transfer word size (32 or 64 bits)
> >  + * @mru_default: default MRU size for MBIM network packets
> > +  * @sideband_wake: Devices using dedicated sideband GPIO for wakeup instead
> > +  *		   of inband wake support (such as sdx24)
> >    */
> >   struct mhi_pci_dev_info {
> >   	const struct mhi_controller_config *config;
> > @@@ -41,7 -42,7 +43,8 @@@
> >   	const char *edl;
> >   	unsigned int bar_num;
> >   	unsigned int dma_data_width;
> >  +	unsigned int mru_default;
> > + 	bool sideband_wake;
> >   };
> >   
> >   #define MHI_CHANNEL_CONFIG_UL(ch_num, ch_name, el_count, ev_ring) \
> > @@@ -254,7 -256,7 +258,8 @@@ static const struct mhi_pci_dev_info mh
> >   	.config = &modem_qcom_v1_mhiv_config,
> >   	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> >   	.dma_data_width = 32,
> >  +	.mru_default = 32768
> > + 	.sideband_wake = false,
> >   };
> >   
> >   static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = {
> > @@@ -643,11 -686,13 +689,14 @@@ static int mhi_pci_probe(struct pci_de
> >   	mhi_cntrl->status_cb = mhi_pci_status_cb;
> >   	mhi_cntrl->runtime_get = mhi_pci_runtime_get;
> >   	mhi_cntrl->runtime_put = mhi_pci_runtime_put;
> > - 	mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
> > - 	mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
> > - 	mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
> >  +	mhi_cntrl->mru = info->mru_default;
> >   
> > + 	if (info->sideband_wake) {
> > + 		mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
> > + 		mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
> > + 		mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
> > + 	}
> > + 
> >   	err = mhi_pci_claim(mhi_cntrl, info->bar_num, DMA_BIT_MASK(info->dma_data_width));
> >   	if (err)
> >   		return err;
> 
> 

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: linux-next: manual merge of the mhi tree with the net-next tree
  2021-07-16  3:37 linux-next: manual merge of the mhi tree with the net-next tree Stephen Rothwell
  2021-07-16  3:42 ` Stephen Rothwell
  2021-07-16  3:46 ` Manivannan Sadhasivam
@ 2021-07-22  4:33 ` Stephen Rothwell
  2021-07-22  8:34   ` Manivannan Sadhasivam
  2 siblings, 1 reply; 6+ messages in thread
From: Stephen Rothwell @ 2021-07-22  4:33 UTC (permalink / raw)
  To: David Miller, Networking, Greg KH, Arnd Bergmann
  Cc: Manivannan Sadhasivam, Bhaumik Bhatt, Linux Kernel Mailing List,
	Linux Next Mailing List, Manivannan Sadhasivam, Richard Laing

[-- Attachment #1: Type: text/plain, Size: 3069 bytes --]

Hi all,

On Fri, 16 Jul 2021 13:37:38 +1000 Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>
> Today's linux-next merge of the mhi tree got a conflict in:
> 
>   drivers/bus/mhi/pci_generic.c
> 
> between commit:
> 
>   5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU")
> 
> from the net-next tree and commit:
> 
>   156ffb7fb7eb ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean")
> 
> from the mhi tree.
> 
> I fixed it up (see below) and can carry the fix as necessary. This
> is now fixed as far as linux-next is concerned, but any non trivial
> conflicts should be mentioned to your upstream maintainer when your tree
> is submitted for merging.  You may also want to consider cooperating
> with the maintainer of the conflicting tree to minimise any particularly
> complex conflicts.
> 
> 
> diff --cc drivers/bus/mhi/pci_generic.c
> index 19413daa0917,8bc6149249e3..000000000000
> --- a/drivers/bus/mhi/pci_generic.c
> +++ b/drivers/bus/mhi/pci_generic.c
> @@@ -32,7 -32,8 +32,9 @@@
>    * @edl: emergency download mode firmware path (if any)
>    * @bar_num: PCI base address register to use for MHI MMIO register space
>    * @dma_data_width: DMA transfer word size (32 or 64 bits)
>  + * @mru_default: default MRU size for MBIM network packets
> +  * @sideband_wake: Devices using dedicated sideband GPIO for wakeup instead
> +  *		   of inband wake support (such as sdx24)
>    */
>   struct mhi_pci_dev_info {
>   	const struct mhi_controller_config *config;
> @@@ -41,7 -42,7 +43,8 @@@
>   	const char *edl;
>   	unsigned int bar_num;
>   	unsigned int dma_data_width;
>  +	unsigned int mru_default;
> + 	bool sideband_wake;
>   };
>   
>   #define MHI_CHANNEL_CONFIG_UL(ch_num, ch_name, el_count, ev_ring) \
> @@@ -254,7 -256,7 +258,8 @@@ static const struct mhi_pci_dev_info mh
>   	.config = &modem_qcom_v1_mhiv_config,
>   	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
>   	.dma_data_width = 32,
>  +	.mru_default = 32768
> + 	.sideband_wake = false,
>   };
>   
>   static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = {
> @@@ -643,11 -686,13 +689,14 @@@ static int mhi_pci_probe(struct pci_de
>   	mhi_cntrl->status_cb = mhi_pci_status_cb;
>   	mhi_cntrl->runtime_get = mhi_pci_runtime_get;
>   	mhi_cntrl->runtime_put = mhi_pci_runtime_put;
> - 	mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
> - 	mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
> - 	mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
>  +	mhi_cntrl->mru = info->mru_default;
>   
> + 	if (info->sideband_wake) {
> + 		mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
> + 		mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
> + 		mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
> + 	}
> + 
>   	err = mhi_pci_claim(mhi_cntrl, info->bar_num, DMA_BIT_MASK(info->dma_data_width));
>   	if (err)
>   		return err;

This is now a conflict between the char-misc.current tree (where commit
156ffb7fb7eb is now 56f6f4c4eb2a) and the net-next tree.

-- 
Cheers,
Stephen Rothwell

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: linux-next: manual merge of the mhi tree with the net-next tree
  2021-07-22  4:33 ` Stephen Rothwell
@ 2021-07-22  8:34   ` Manivannan Sadhasivam
  0 siblings, 0 replies; 6+ messages in thread
From: Manivannan Sadhasivam @ 2021-07-22  8:34 UTC (permalink / raw)
  To: Stephen Rothwell
  Cc: David Miller, Networking, Greg KH, Arnd Bergmann, Bhaumik Bhatt,
	Linux Kernel Mailing List, Linux Next Mailing List,
	Richard Laing

On Thu, Jul 22, 2021 at 02:33:06PM +1000, Stephen Rothwell wrote:
> Hi all,
> 
> On Fri, 16 Jul 2021 13:37:38 +1000 Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> >
> > Today's linux-next merge of the mhi tree got a conflict in:
> > 
> >   drivers/bus/mhi/pci_generic.c
> > 
> > between commit:
> > 
> >   5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU")
> > 
> > from the net-next tree and commit:
> > 
> >   156ffb7fb7eb ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean")
> > 
> > from the mhi tree.
> > 
> > I fixed it up (see below) and can carry the fix as necessary. This
> > is now fixed as far as linux-next is concerned, but any non trivial
> > conflicts should be mentioned to your upstream maintainer when your tree
> > is submitted for merging.  You may also want to consider cooperating
> > with the maintainer of the conflicting tree to minimise any particularly
> > complex conflicts.
> > 
> > 
> > diff --cc drivers/bus/mhi/pci_generic.c
> > index 19413daa0917,8bc6149249e3..000000000000
> > --- a/drivers/bus/mhi/pci_generic.c
> > +++ b/drivers/bus/mhi/pci_generic.c
> > @@@ -32,7 -32,8 +32,9 @@@
> >    * @edl: emergency download mode firmware path (if any)
> >    * @bar_num: PCI base address register to use for MHI MMIO register space
> >    * @dma_data_width: DMA transfer word size (32 or 64 bits)
> >  + * @mru_default: default MRU size for MBIM network packets
> > +  * @sideband_wake: Devices using dedicated sideband GPIO for wakeup instead
> > +  *		   of inband wake support (such as sdx24)
> >    */
> >   struct mhi_pci_dev_info {
> >   	const struct mhi_controller_config *config;
> > @@@ -41,7 -42,7 +43,8 @@@
> >   	const char *edl;
> >   	unsigned int bar_num;
> >   	unsigned int dma_data_width;
> >  +	unsigned int mru_default;
> > + 	bool sideband_wake;
> >   };
> >   
> >   #define MHI_CHANNEL_CONFIG_UL(ch_num, ch_name, el_count, ev_ring) \
> > @@@ -254,7 -256,7 +258,8 @@@ static const struct mhi_pci_dev_info mh
> >   	.config = &modem_qcom_v1_mhiv_config,
> >   	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> >   	.dma_data_width = 32,
> >  +	.mru_default = 32768
> > + 	.sideband_wake = false,
> >   };
> >   
> >   static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = {
> > @@@ -643,11 -686,13 +689,14 @@@ static int mhi_pci_probe(struct pci_de
> >   	mhi_cntrl->status_cb = mhi_pci_status_cb;
> >   	mhi_cntrl->runtime_get = mhi_pci_runtime_get;
> >   	mhi_cntrl->runtime_put = mhi_pci_runtime_put;
> > - 	mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
> > - 	mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
> > - 	mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
> >  +	mhi_cntrl->mru = info->mru_default;
> >   
> > + 	if (info->sideband_wake) {
> > + 		mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
> > + 		mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
> > + 		mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
> > + 	}
> > + 
> >   	err = mhi_pci_claim(mhi_cntrl, info->bar_num, DMA_BIT_MASK(info->dma_data_width));
> >   	if (err)
> >   		return err;
> 
> This is now a conflict between the char-misc.current tree (where commit
> 156ffb7fb7eb is now 56f6f4c4eb2a) and the net-next tree.

Yes, this is expected as I said before.

Dave, please consider dropping/reverting the patch. The MHI patch should
go through char-misc tree.

Thanks,
Mani
> 
> -- 
> Cheers,
> Stephen Rothwell



^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-07-22  8:34 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-16  3:37 linux-next: manual merge of the mhi tree with the net-next tree Stephen Rothwell
2021-07-16  3:42 ` Stephen Rothwell
2021-07-16  3:46 ` Manivannan Sadhasivam
2021-07-16  4:04   ` Manivannan Sadhasivam
2021-07-22  4:33 ` Stephen Rothwell
2021-07-22  8:34   ` Manivannan Sadhasivam

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).