From: Jan Stancek <jstancek@redhat.com>
To: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Cyril Hrubis <chrubis@suse.cz>,
ltp@lists.linux.it,
Linux-Next Mailing List <linux-next@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>,
alexey kodanev <alexey.kodanev@oracle.com>,
the hoang0709 <the_hoang0709@yahoo.com>,
trond.myklebust@hammerspace.com
Subject: Re: Linux-next-20190823: x86_64/i386: prot_hsymlinks.c:325: Failed to run cmd: useradd hsym
Date: Mon, 26 Aug 2019 10:38:05 -0400 (EDT) [thread overview]
Message-ID: <203971593.8175020.1566830285708.JavaMail.zimbra@redhat.com> (raw)
In-Reply-To: <CA+G9fYsHpNKFHr=ZukVvj+uMJDyHj2Xwb9bCfzPQyYzMjZ0rCw@mail.gmail.com>
----- Original Message -----
> Hi Jan and Cyril,
>
> On Mon, 26 Aug 2019 at 16:35, Jan Stancek <jstancek@redhat.com> wrote:
> >
> >
> >
> > ----- Original Message -----
> > > Hi!
> > > > Do you see this LTP prot_hsymlinks failure on linux next 20190823 on
> > > > x86_64 and i386 devices?
> > > >
> > > > test output log,
> > > > useradd: failure while writing changes to /etc/passwd
> > > > useradd: /home/hsym was created, but could not be removed
> > >
> > > This looks like an unrelated problem, failure to write to /etc/passwd
> > > probably means that filesystem is full or some problem happend and how
> > > is remounted RO.
> >
> > In Naresh' example, root is on NFS:
> > root=/dev/nfs rw
> > nfsroot=10.66.16.123:/var/lib/lava/dispatcher/tmp/886412/extract-nfsrootfs-tyuevoxm,tcp,hard,intr
>
> Right !
> root is mounted on NFS.
>
> >
> > 10.66.16.123:/var/lib/lava/dispatcher/tmp/886412/extract-nfsrootfs-tyuevoxm
> > on / type nfs
> > (rw,relatime,vers=2,rsize=4096,wsize=4096,namlen=255,hard,nolock,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=10.66.16.123,mountvers=1,mountproto=tcp,local_lock=all,addr=10.66.16.123)
> > devtmpfs on /dev type devtmpfs
> > (rw,relatime,size=3977640k,nr_inodes=994410,mode=755)
> >
> > Following message repeats couple times in logs:
> > NFS: Server wrote zero bytes, expected XXX
> >
> > Naresh, can you check if there are any errors on NFS server side?
>
> I have re-tested the failed tests on next-20190822 and all get pass
> which is also
> using same NFS server [1] [2].
Thanks, that suggests some client side change between next-20190822 and next-20190823
might introduced it.
>
> > Maybe run NFS cthon against that server with client running next-20190822
> > and next-20190823.
>
> Thanks for the pointers.
> I will setup and run NFS cthon on next-20190822 and next-20190823.
I'll try to reproduce too.
>
> >
> > >
> > > I do not see the kernel messages from this job anywhere at the job
> > > pages, is it stored somewhere?
> >
> > It appears to be mixed in same log file:
> > https://qa-reports.linaro.org/lkft/linux-next-oe/build/next-20190823/testrun/886412/log
>
> For the record the following tests failed on linux -next-20190823 on x86_64
> and i386. The filesystem is mounted on NFS and tests are using
> locally mounted hard drive ( with -d /scratch ).
>
> Juno-r2 device filesystem mounted on NFS and did not see these errors
> and test getting pass on -next-20190823.
>
> These failures are reproducible all time on next-20190823 kernel on x86_64
> and i386 device with root mounted on NFS [3] [4] [5] [6].
>
> I will git bisect to find out which is bad commit.
>
> prot_hsymlinks: [3]
> ------------------
> useradd: failure while writing changes to /etc/passwd
> useradd: /home/hsym was created, but could not be removed
> userdel: user 'hsym' does not exist
> prot_hsymlinks 1 TBROK : prot_hsymlinks.c:325: Failed to run
> cmd: useradd hsym
> prot_hsymlinks 2 TBROK : prot_hsymlinks.c:325: Remaining cases broken
> prot_hsymlinks 3 TBROK : prot_hsymlinks.c:325: Failed to run
> cmd: userdel -r hsym
> prot_hsymlinks 4 TBROK : tst_sig.c:234: unexpected signal
> SIGIOT/SIGABRT(6) received (pid = 8324).
>
> logrotate01: [4]
> -------------
> compressing log with: /bin/gzip
> error: error creating temp state file /var/lib/logrotate.status.tmp:
> Input/output error
> logrotate01 1 TFAIL : ltpapicmd.c:154: Test #1: logrotate
> command exited with 1 return code. Output:
>
> sem_unlink_2-2: [5]
> ------------------
> make[3]: Entering directory
> '/opt/ltp/testcases/open_posix_testsuite/conformance/interfaces/sem_unlink'
> cat: write error: Input/output error
> conformance/interfaces/sem_unlink/sem_unlink_2-2: execution: FAILED
>
> syslog{01 ...10} [6]
> -------------------
> cp: failed to close '/etc/syslog.conf.ltpback': Input/output error
> syslog01 1 TBROK : ltpapicmd.c:188: failed to backup /etc/syslog.conf
>
> cp: failed to close '/etc/syslog.conf.ltpback': Input/output error
> syslog02 1 TBROK : ltpapicmd.c:188: failed to backup /etc/syslog.conf
>
> ...
> cp: failed to close '/etc/syslog.conf.ltpback': Input/output error
> syslog10 1 TBROK : ltpapicmd.c:188: failed to backup /etc/syslog.conf
>
> ref:
> PASS on 20190222:
> [1] https://lkft.validation.linaro.org/scheduler/job/890446#L1232
> [2] https://lkft.validation.linaro.org/scheduler/job/890454
>
> FAILED on 20190823:
> [3] https://lkft.validation.linaro.org/scheduler/job/890404#L1245
> [4] https://lkft.validation.linaro.org/scheduler/job/886408#L2544
> [5] https://lkft.validation.linaro.org/scheduler/job/886409#L3088
> [6] https://lkft.validation.linaro.org/scheduler/job/890400#L1234
>
> - Naresh
>
next prev parent reply other threads:[~2019-08-26 14:38 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-26 9:47 Linux-next-20190823: x86_64/i386: prot_hsymlinks.c:325: Failed to run cmd: useradd hsym Naresh Kamboju
2019-08-26 10:41 ` Cyril Hrubis
2019-08-26 11:05 ` Jan Stancek
2019-08-26 13:50 ` Naresh Kamboju
2019-08-26 14:38 ` Jan Stancek [this message]
2019-08-26 15:58 ` Trond Myklebust
2019-08-26 23:12 ` Jan Stancek
2019-08-27 0:59 ` Trond Myklebust
2019-08-27 10:25 ` Jan Stancek
2019-08-27 12:58 ` Trond Myklebust
2019-08-27 13:20 ` Jan Stancek
2019-08-27 6:34 ` Naresh Kamboju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=203971593.8175020.1566830285708.JavaMail.zimbra@redhat.com \
--to=jstancek@redhat.com \
--cc=alexey.kodanev@oracle.com \
--cc=chrubis@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-next@vger.kernel.org \
--cc=ltp@lists.linux.it \
--cc=naresh.kamboju@linaro.org \
--cc=the_hoang0709@yahoo.com \
--cc=trond.myklebust@hammerspace.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).