linux-next.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Unexpected kernel BRK exception at EL1 - Internal error: BRK handler: f20003e8 - gic_dist_config
@ 2022-05-16  6:16 Naresh Kamboju
  2022-05-16  7:08 ` Marc Zyngier
  0 siblings, 1 reply; 5+ messages in thread
From: Naresh Kamboju @ 2022-05-16  6:16 UTC (permalink / raw)
  To: open list, Linux-Next Mailing List, lkft-triage
  Cc: Marc Zyngier, Stephen Rothwell, Thomas Gleixner, pali, Ingo Molnar

The kernel crash reported on arm64 juno-r2 device with kselftest-merge config
while booting Linux next-20220513 kernel  [1].

[    0.000000] Booting Linux on physical CPU 0x0000000100 [0x410fd033]
[    0.000000] Linux version 5.18.0-rc6-next-20220513
(oe-user@oe-host) (aarch64-linaro-linux-gcc (GCC) 7.3.0, GNU ld (GNU
Binutils) 2.30.0.20180208) #1 SMP PREEMPT Fri May 13 08:34:42 UTC 2022
[    0.000000] Machine model: ARM Juno development board (r2)
[    0.000000] earlycon: pl11 at MMIO 0x000000007ff80000 (options '')
[    0.000000] printk: bootconsole [pl11] enabled
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem
0x0000000080000000-0x00000009ffffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x9fefce600-0x9fefd0fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000009ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x00000000feffffff]
[    0.000000]   node   0: [mem 0x0000000880000000-0x00000009ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000009ffffffff]
[    0.000000] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.000000] cma: Reserved 32 MiB at 0x00000000fd000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 31 pages/cpu s89632 r8192 d29152 u126976
[    0.000000] pcpu-alloc: s89632 r8192 d29152 u126976 alloc=31*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 843419
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] Fallback order for Node 0: 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2060288
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyAMA0,115200n8
root=/dev/nfs rw
nfsroot=10.66.16.125:/var/lib/lava/dispatcher/tmp/5021955/extract-nfsrootfs-23zdukp_,tcp,hard,vers=3
rootwait earlycon=pl011,0x7ff80000 debug systemd.log_target=null
user_debug=31 androidboot.hardware=juno loglevel=9
sky2.mac_address=0x00,0x02,0xF7,0x00,0x68,0x3F ip=dhcp
[    0.000000] Unknown kernel command line parameters
\"user_debug=31\", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10,
4194304 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] Stack Depot early init allocating hash table with
memblock_alloc, 8388608 bytes
[    0.000000] software IO TLB: mapped [mem
0x00000000f9000000-0x00000000fd000000] (64MB)
[    0.000000] Memory: 8038640K/8372224K available (22784K kernel
code, 5468K rwdata, 11824K rodata, 11520K init, 11734K bss, 300816K
reserved, 32768K cma-reserved)
[    0.000000] **********************************************************
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **                                                      **
[    0.000000] ** This system shows unhashed kernel memory addresses   **
[    0.000000] ** via the console, logs, and other interfaces. This    **
[    0.000000] ** might reduce the security of your system.            **
[    0.000000] **                                                      **
[    0.000000] ** If you see this message and you are not debugging    **
[    0.000000] ** the kernel, report this immediately to your system   **
[    0.000000] ** administrator!                                       **
[    0.000000] **                                                      **
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **********************************************************
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] ftrace: allocating 69398 entries in 272 pages
[    0.000000] ftrace: allocated 272 pages with 2 groups
[    0.000000] trace event string verifier disabled
[    0.000000] Running RCU self tests
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: RCU event tracing is enabled.
[    0.000000] rcu: RCU lockdep checking is enabled.
[    0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.000000] Trampoline variant of Tasks RCU enabled.
[    0.000000] Rude variant of Tasks RCU enabled.
[    0.000000] Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay
is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] Unexpected kernel BRK exception at EL1
[    0.000000] Internal error: BRK handler: f20003e8 [#1] PREEMPT SMP
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
5.18.0-rc6-next-20220513 #1
[    0.000000] Hardware name: ARM Juno development board (r2) (DT)
[    0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.000000] pc : gic_dist_config+0x4c/0x68
[    0.000000] lr : gic_init_bases+0xd4/0x248
[    0.000000] sp : ffff80000ad33b90
[    0.000000] x29: ffff80000ad33b90 x28: ffff80000a2dd8d8 x27: ffff80000ad442d0
[    0.000000] x26: dead000000000100 x25: ffff00097efdeb10 x24: 0000000000000000
[    0.000000] x23: ffff80000a0ef000 x22: ffff80000a0ef000 x21: 0000000000000000
[    0.000000] x20: ffff800008005000 x19: 0000000000000180 x18: 0000000000000000
[    0.000000] x17: ffff80000a2237c4 x16: ffff80000a223210 x15: ffff8000087f8fa0
[    0.000000] x14: ffff80000815dfdc x13: ffff80000a1f03ec x12: 000000000004ff45
[    0.000000] x11: ffff80000b33e680 x10: 0000000000000032 x9 : ffff80000b29b7b0
[    0.000000] x8 : ffff80000bcfb24c x7 : 00000000ffffffff x6 : ffff80000ad44244
[    0.000000] x5 : ffff80000ad4d100 x4 : ffff80000ade3508 x3 : 0000000004040404
[    0.000000] x2 : 0000000000000180 x1 : 0000000000000180 x0 : ffff800008005c5c
[    0.000000] Call trace:
[    0.000000]  gic_dist_config+0x4c/0x68
[    0.000000]  gic_init_bases+0xd4/0x248
[    0.000000]  __gic_init_bases+0xac/0x16c
[    0.000000]  gic_of_init+0x28c/0x380
[    0.000000]  of_irq_init+0x208/0x3f8
[    0.000000]  irqchip_init+0x1c/0x40
[    0.000000]  init_IRQ+0xf0/0x108
[    0.000000]  start_kernel+0x53c/0x740
[    0.000000]  __primary_switched+0xc0/0xc8
[    0.000000] Code: b900001f 11004042 6b02027f 54ffff48 (d4207d00)
[    0.000000] ---[ end trace 0000000000000000 ]---
[    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[    0.000000] ---[ end Kernel panic - not syncing: Attempted to kill
the idle task! ]---

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>


metadata:
  git branch: master
  git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
  git commit: 1e1b28b936aed946122b4e0991e7144fdbbfd77e
  git describe: next-20220513
  make_kernelversion: 5.18.0-rc6
  kernel-config:
http://snapshots.linaro.org/openembedded/lkft/lkft/sumo/juno/lkft/linux-next/1226/config
  build-location:
http://snapshots.linaro.org/openembedded/lkft/lkft/sumo/juno/lkft/linux-next/1226
  toolchain: aarch64-linaro-linux 7.%


--
Linaro LKFT
https://lkft.linaro.org

[1] https://lkft.validation.linaro.org/scheduler/job/5021955#L931

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: Unexpected kernel BRK exception at EL1 - Internal error: BRK handler: f20003e8 - gic_dist_config
  2022-05-16  6:16 Unexpected kernel BRK exception at EL1 - Internal error: BRK handler: f20003e8 - gic_dist_config Naresh Kamboju
@ 2022-05-16  7:08 ` Marc Zyngier
  2022-05-16 13:58   ` Naresh Kamboju
  0 siblings, 1 reply; 5+ messages in thread
From: Marc Zyngier @ 2022-05-16  7:08 UTC (permalink / raw)
  To: Naresh Kamboju
  Cc: open list, Linux-Next Mailing List, lkft-triage,
	Stephen Rothwell, Thomas Gleixner, pali, Ingo Molnar

On Mon, 16 May 2022 07:16:22 +0100,
Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
> 
> The kernel crash reported on arm64 juno-r2 device with kselftest-merge config
> while booting Linux next-20220513 kernel  [1].
> 
> [    0.000000] Booting Linux on physical CPU 0x0000000100 [0x410fd033]
> [    0.000000] Linux version 5.18.0-rc6-next-20220513
> (oe-user@oe-host) (aarch64-linaro-linux-gcc (GCC) 7.3.0, GNU ld (GNU
> Binutils) 2.30.0.20180208) #1 SMP PREEMPT Fri May 13 08:34:42 UTC 2022
> [    0.000000] Machine model: ARM Juno development board (r2)
> [    0.000000] earlycon: pl11 at MMIO 0x000000007ff80000 (options '')
> [    0.000000] printk: bootconsole [pl11] enabled
> [    0.000000] efi: UEFI not found.
> [    0.000000] NUMA: No NUMA configuration found
> [    0.000000] NUMA: Faking a node at [mem
> 0x0000000080000000-0x00000009ffffffff]
> [    0.000000] NUMA: NODE_DATA [mem 0x9fefce600-0x9fefd0fff]
> [    0.000000] Zone ranges:
> [    0.000000]   DMA      [mem 0x0000000080000000-0x00000000ffffffff]
> [    0.000000]   DMA32    empty
> [    0.000000]   Normal   [mem 0x0000000100000000-0x00000009ffffffff]
> [    0.000000] Movable zone start for each node
> [    0.000000] Early memory node ranges
> [    0.000000]   node   0: [mem 0x0000000080000000-0x00000000feffffff]
> [    0.000000]   node   0: [mem 0x0000000880000000-0x00000009ffffffff]
> [    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000009ffffffff]
> [    0.000000] On node 0, zone Normal: 4096 pages in unavailable ranges
> [    0.000000] cma: Reserved 32 MiB at 0x00000000fd000000
> [    0.000000] psci: probing for conduit method from DT.
> [    0.000000] psci: PSCIv1.1 detected in firmware.
> [    0.000000] psci: Using standard PSCI v0.2 function IDs
> [    0.000000] psci: Trusted OS migration not required
> [    0.000000] psci: SMC Calling Convention v1.0
> [    0.000000] percpu: Embedded 31 pages/cpu s89632 r8192 d29152 u126976
> [    0.000000] pcpu-alloc: s89632 r8192 d29152 u126976 alloc=31*4096
> [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
> [    0.000000] Detected VIPT I-cache on CPU0
> [    0.000000] CPU features: detected: ARM erratum 843419
> [    0.000000] CPU features: detected: ARM erratum 845719
> [    0.000000] Fallback order for Node 0: 0
> [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2060288
> [    0.000000] Policy zone: Normal
> [    0.000000] Kernel command line: console=ttyAMA0,115200n8
> root=/dev/nfs rw
> nfsroot=10.66.16.125:/var/lib/lava/dispatcher/tmp/5021955/extract-nfsrootfs-23zdukp_,tcp,hard,vers=3
> rootwait earlycon=pl011,0x7ff80000 debug systemd.log_target=null
> user_debug=31 androidboot.hardware=juno loglevel=9
> sky2.mac_address=0x00,0x02,0xF7,0x00,0x68,0x3F ip=dhcp
> [    0.000000] Unknown kernel command line parameters
> \"user_debug=31\", will be passed to user space.
> [    0.000000] Dentry cache hash table entries: 1048576 (order: 11,
> 8388608 bytes, linear)
> [    0.000000] Inode-cache hash table entries: 524288 (order: 10,
> 4194304 bytes, linear)
> [    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
> [    0.000000] Stack Depot early init allocating hash table with
> memblock_alloc, 8388608 bytes
> [    0.000000] software IO TLB: mapped [mem
> 0x00000000f9000000-0x00000000fd000000] (64MB)
> [    0.000000] Memory: 8038640K/8372224K available (22784K kernel
> code, 5468K rwdata, 11824K rodata, 11520K init, 11734K bss, 300816K
> reserved, 32768K cma-reserved)
> [    0.000000] **********************************************************
> [    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
> [    0.000000] **                                                      **
> [    0.000000] ** This system shows unhashed kernel memory addresses   **
> [    0.000000] ** via the console, logs, and other interfaces. This    **
> [    0.000000] ** might reduce the security of your system.            **
> [    0.000000] **                                                      **
> [    0.000000] ** If you see this message and you are not debugging    **
> [    0.000000] ** the kernel, report this immediately to your system   **
> [    0.000000] ** administrator!                                       **
> [    0.000000] **                                                      **
> [    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
> [    0.000000] **********************************************************
> [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
> [    0.000000] ftrace: allocating 69398 entries in 272 pages
> [    0.000000] ftrace: allocated 272 pages with 2 groups
> [    0.000000] trace event string verifier disabled
> [    0.000000] Running RCU self tests
> [    0.000000] rcu: Preemptible hierarchical RCU implementation.
> [    0.000000] rcu: RCU event tracing is enabled.
> [    0.000000] rcu: RCU lockdep checking is enabled.
> [    0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
> [    0.000000] Trampoline variant of Tasks RCU enabled.
> [    0.000000] Rude variant of Tasks RCU enabled.
> [    0.000000] Tracing variant of Tasks RCU enabled.
> [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay
> is 25 jiffies.
> [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
> [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
> [    0.000000] Root IRQ handler: gic_handle_irq
> [    0.000000] GIC: Using split EOI/Deactivate mode
> [    0.000000] Unexpected kernel BRK exception at EL1

Huh. Who inserts random BRKs like this?

> [    0.000000] Internal error: BRK handler: f20003e8 [#1] PREEMPT SMP
> [    0.000000] Modules linked in:
> [    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
> 5.18.0-rc6-next-20220513 #1
> [    0.000000] Hardware name: ARM Juno development board (r2) (DT)
> [    0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [    0.000000] pc : gic_dist_config+0x4c/0x68
> [    0.000000] lr : gic_init_bases+0xd4/0x248

Please provide a disassembly of this function.

Thanks,

	M.

-- 
Without deviation from the norm, progress is not possible.

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: Unexpected kernel BRK exception at EL1 - Internal error: BRK handler: f20003e8 - gic_dist_config
  2022-05-16  7:08 ` Marc Zyngier
@ 2022-05-16 13:58   ` Naresh Kamboju
  2022-05-16 14:37     ` Naresh Kamboju
  2022-05-16 14:48     ` Marc Zyngier
  0 siblings, 2 replies; 5+ messages in thread
From: Naresh Kamboju @ 2022-05-16 13:58 UTC (permalink / raw)
  To: Marc Zyngier
  Cc: open list, Linux-Next Mailing List, lkft-triage,
	Stephen Rothwell, Thomas Gleixner, pali, Ingo Molnar

Hi Marc,

Thanks for looking into this report.

On Mon, 16 May 2022 at 12:38, Marc Zyngier <maz@kernel.org> wrote:
>
> On Mon, 16 May 2022 07:16:22 +0100,
> Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
> >
> > The kernel crash reported on arm64 juno-r2 device with kselftest-merge config
> > while booting Linux next-20220513 kernel  [1].

<trim>

>
> Huh. Who inserts random BRKs like this?
>
> > [    0.000000] Internal error: BRK handler: f20003e8 [#1] PREEMPT SMP
> > [    0.000000] Modules linked in:
> > [    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
> > 5.18.0-rc6-next-20220513 #1
> > [    0.000000] Hardware name: ARM Juno development board (r2) (DT)
> > [    0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> > [    0.000000] pc : gic_dist_config+0x4c/0x68
> > [    0.000000] lr : gic_init_bases+0xd4/0x248
>
> Please provide a disassembly of this function.

objdump snipper is here.
http://ix.io/3XUW

The vmlinux file is located in this url
Please make use of it.
http://snapshots.linaro.org/openembedded/lkft/lkft/sumo/juno/lkft/linux-next/1226/

- Naresh

>
> Thanks,
>
>         M.
>
> --
> Without deviation from the norm, progress is not possible.

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: Unexpected kernel BRK exception at EL1 - Internal error: BRK handler: f20003e8 - gic_dist_config
  2022-05-16 13:58   ` Naresh Kamboju
@ 2022-05-16 14:37     ` Naresh Kamboju
  2022-05-16 14:48     ` Marc Zyngier
  1 sibling, 0 replies; 5+ messages in thread
From: Naresh Kamboju @ 2022-05-16 14:37 UTC (permalink / raw)
  To: Marc Zyngier
  Cc: open list, Linux-Next Mailing List, lkft-triage,
	Stephen Rothwell, Thomas Gleixner, pali, Ingo Molnar

Hi Marc,

FYI,

On Mon, 16 May 2022 at 19:28, Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
>
> Hi Marc,
>
> Thanks for looking into this report.
>
> On Mon, 16 May 2022 at 12:38, Marc Zyngier <maz@kernel.org> wrote:
> >
> > On Mon, 16 May 2022 07:16:22 +0100,
> > Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
> > >
> > > The kernel crash reported on arm64 juno-r2 device with kselftest-merge config
> > > while booting Linux next-20220513 kernel  [1].

This is happening only with the gcc-7.3.x built kernel on arm64 juno-r2 device.

- Naresh

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: Unexpected kernel BRK exception at EL1 - Internal error: BRK handler: f20003e8 - gic_dist_config
  2022-05-16 13:58   ` Naresh Kamboju
  2022-05-16 14:37     ` Naresh Kamboju
@ 2022-05-16 14:48     ` Marc Zyngier
  1 sibling, 0 replies; 5+ messages in thread
From: Marc Zyngier @ 2022-05-16 14:48 UTC (permalink / raw)
  To: Naresh Kamboju
  Cc: open list, Linux-Next Mailing List, lkft-triage,
	Stephen Rothwell, Thomas Gleixner, pali, Ingo Molnar

On Mon, 16 May 2022 14:58:28 +0100,
Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
> 
> Hi Marc,
> 
> Thanks for looking into this report.
> 
> On Mon, 16 May 2022 at 12:38, Marc Zyngier <maz@kernel.org> wrote:
> >
> > On Mon, 16 May 2022 07:16:22 +0100,
> > Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
> > >
> > > The kernel crash reported on arm64 juno-r2 device with kselftest-merge config
> > > while booting Linux next-20220513 kernel  [1].
> 
> <trim>
> 
> >
> > Huh. Who inserts random BRKs like this?
> >
> > > [    0.000000] Internal error: BRK handler: f20003e8 [#1] PREEMPT SMP
> > > [    0.000000] Modules linked in:
> > > [    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
> > > 5.18.0-rc6-next-20220513 #1
> > > [    0.000000] Hardware name: ARM Juno development board (r2) (DT)
> > > [    0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> > > [    0.000000] pc : gic_dist_config+0x4c/0x68
> > > [    0.000000] lr : gic_init_bases+0xd4/0x248
> >
> > Please provide a disassembly of this function.
> 
> objdump snipper is here.
> http://ix.io/3XUW

Wrong function (I wasn't clear I wanted the breaking function, not the
caller).

> The vmlinux file is located in this url
> Please make use of it.
> http://snapshots.linaro.org/openembedded/lkft/lkft/sumo/juno/lkft/linux-next/1226/

ffff8000087f9908 <gic_dist_config>:
ffff8000087f9908:       a9bd7bfd        stp     x29, x30, [sp, #-48]!
ffff8000087f990c:       910003fd        mov     x29, sp
ffff8000087f9910:       a90153f3        stp     x19, x20, [sp, #16]
ffff8000087f9914:       f90013f5        str     x21, [sp, #32]
ffff8000087f9918:       2a0103f3        mov     w19, w1
ffff8000087f991c:       aa0003f4        mov     x20, x0
ffff8000087f9920:       aa0203f5        mov     x21, x2
ffff8000087f9924:       aa1e03e0        mov     x0, x30
ffff8000087f9928:       97e0de72        bl      ffff8000080312f0 <_mcount>
ffff8000087f992c:       7100827f        cmp     w19, #0x20
ffff8000087f9930:       54000149        b.ls    ffff8000087f9958 <gic_dist_config+0x50>  // b.plast
ffff8000087f9934:       52800402        mov     w2, #0x20                       // #32
ffff8000087f9938:       53027c40        lsr     w0, w2, #2
ffff8000087f993c:       91300000        add     x0, x0, #0xc00
ffff8000087f9940:       8b000280        add     x0, x20, x0
ffff8000087f9944:       b900001f        str     wzr, [x0]
ffff8000087f9948:       11004042        add     w2, w2, #0x10
ffff8000087f994c:       6b02027f        cmp     w19, w2
ffff8000087f9950:       54ffff48        b.hi    ffff8000087f9938 <gic_dist_config+0x30>  // b.pmore
ffff8000087f9954:       d4207d00        brk     #0x3e8

What the hell is this??? This function has no WARN_ON, no BUG_ON, the
allowed values for the immediate are:

#define KPROBES_BRK_IMM                 0x004
#define UPROBES_BRK_IMM                 0x005
#define KPROBES_BRK_SS_IMM              0x006
#define FAULT_BRK_IMM                   0x100
#define KGDB_DYN_DBG_BRK_IMM            0x400
#define KGDB_COMPILED_DBG_BRK_IMM       0x401
#define BUG_BRK_IMM                     0x800
#define KASAN_BRK_IMM                   0x900
#define KASAN_BRK_MASK                  0x0ff

and 0x3e8 isn't one of them. This seems like a GCC 'division by zero'
hack, but there are no divisions by zero here. Your kernel is also
full of the stuff.

What sort of odd options do you have? I can't help but notice that you
have the Rust stuff in your tree. Can you please start by disabling
this, just in case there is an interaction with your toolchain?

Thanks,

	M.

-- 
Without deviation from the norm, progress is not possible.

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2022-05-16 14:49 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-16  6:16 Unexpected kernel BRK exception at EL1 - Internal error: BRK handler: f20003e8 - gic_dist_config Naresh Kamboju
2022-05-16  7:08 ` Marc Zyngier
2022-05-16 13:58   ` Naresh Kamboju
2022-05-16 14:37     ` Naresh Kamboju
2022-05-16 14:48     ` Marc Zyngier

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).