* [next] [arm64] [gpio] BUG: key has not been registered! DEBUG_LOCKS_WARN_ON: @ 2021-04-07 17:02 Naresh Kamboju 2021-04-07 22:51 ` Andy Shevchenko 0 siblings, 1 reply; 6+ messages in thread From: Naresh Kamboju @ 2021-04-07 17:02 UTC (permalink / raw) To: linux-gpio, Linux-Next Mailing List, open list, lkft-triage, open list:KERNEL SELFTEST FRAMEWORK Cc: Stephen Rothwell, Arnd Bergmann, Thomas Gleixner, Ingo Molnar, Peter Zijlstra, Colin King, Christian Brauner, Bartosz Golaszewski While running kselftest recently added gpio gpio-sim.sh test case the following warning was triggered on Linux next tag 20210330 tag running on arm64 juno and hikey devices. GOOD: next-20210326 BAD: next-20210330 This is still happening today on Linux next tag 20210407. # selftests: gpio: gpio-sim.sh # 1. chip_name and dev_name attributes # 1.1. Chip name is communicated to user [ 143.081193] BUG: key ffff000800eba398 has not been registered! [ 143.087326] ------------[ cut here ]------------ [ 143.091987] DEBUG_LOCKS_WARN_ON(1) [ 143.092005] WARNING: CPU: 1 PID: 1821 at /usr/src/kernel/kernel/locking/lockdep.c:4688 lockdep_init_map_type+0xf0/0x298 [ 143.106223] Modules linked in: gpio_sim rfkill tda998x cec drm_kms_helper drm crct10dif_ce fuse [last unloaded: gpio_mockup] [ 143.117495] CPU: 1 PID: 1821 Comm: mv Not tainted 5.12.0-rc5-next-20210330 #1 [ 143.124645] Hardware name: ARM Juno development board (r2) (DT) [ 143.130572] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 143.136589] pc : lockdep_init_map_type+0xf0/0x298 [ 143.141302] lr : lockdep_init_map_type+0xf0/0x298 [ 143.146014] sp : ffff800013fb3560 [ 143.149330] x29: ffff800013fb3560 x28: 00000000ffffee4b [ 143.154655] x27: 00000000000011b4 x26: 0000000000001000 [ 143.159979] x25: ffff000800eba380 x24: 0000000000000000 [ 143.165303] x23: 0000000000000000 x22: 0000000000000000 [ 143.170626] x21: ffff80001382b000 x20: ffff000800eba398 [ 143.175949] x19: ffff000827ac32a8 x18: ffffffffffffffff [ 143.181273] x17: 0000000000000000 x16: 0000000000000000 [ 143.186595] x15: ffff800012900a88 x14: ffff800093fb3167 [ 143.191918] x13: ffff800013fb3175 x12: 000000000000a0ec [ 143.197241] x11: 0000000005f5e0ff x10: ffff800013fb30c0 [ 143.202565] x9 : ffff800013fb3560 x8 : 4e5241575f534b43 [ 143.207888] x7 : ffff800012989ad8 x6 : ffff800013fb3180 [ 143.213211] x5 : 0000000000000001 x4 : 0000000000000001 [ 143.218534] x3 : ffff800012901000 x2 : 0000000000000000 [ 143.223856] x1 : b4b7acac5f71bc00 x0 : 0000000000000000 [ 143.229180] Call trace: [ 143.231625] lockdep_init_map_type+0xf0/0x298 [ 143.235989] __kernfs_create_file+0xa8/0x1d0 [ 143.240268] sysfs_add_file_mode_ns+0xa8/0x1f8 [ 143.244718] internal_create_group+0x118/0x420 [ 143.249169] sysfs_create_group+0x2c/0x38 [ 143.253185] gpio_sim_probe+0x358/0x3c0 [gpio_sim] [ 143.257995] platform_probe+0x6c/0xd8 [ 143.261663] really_probe+0x16c/0x508 [ 143.265332] driver_probe_device+0x104/0x178 [ 143.269610] __device_attach_driver+0xa4/0x130 [ 143.274062] bus_for_each_drv+0x78/0xd8 [ 143.277903] __device_attach+0xf0/0x178 [ 143.281745] device_initial_probe+0x24/0x30 [ 143.285935] bus_probe_device+0xa0/0xa8 [ 143.289776] device_add+0x424/0x810 [ 143.293270] platform_device_add+0x12c/0x2c0 [ 143.297545] platform_device_register_full+0x124/0x150 [ 143.302692] gpio_sim_config_commit_item+0x160/0x1e0 [gpio_sim] [ 143.308628] configfs_rename+0x1dc/0x220 [ 143.312557] vfs_rename+0x394/0x960 [ 143.316051] do_renameat2+0x408/0x4c0 [ 143.319718] __arm64_sys_renameat+0x5c/0x70 [ 143.323908] el0_svc_common+0x7c/0x158 [ 143.327665] do_el0_svc+0x38/0x90 [ 143.330985] el0_svc+0x20/0x30 [ 143.334045] el0_sync_handler+0x8c/0xb0 [ 143.337886] el0_sync+0x13c/0x140 [ 143.341204] irq event stamp: 5607 [ 143.344520] hardirqs last enabled at (5607): [<ffff800011462dd8>] _raw_spin_unlock_irq+0x48/0x90 [ 143.353410] hardirqs last disabled at (5606): [<ffff8000114586c4>] __schedule+0x364/0x950 [ 143.361605] softirqs last enabled at (5602): [<ffff800010010958>] __do_softirq+0x510/0x63c [ 143.369971] softirqs last disabled at (5577): [<ffff8000100a7474>] irq_exit+0x1b4/0x1c0 [ 143.377992] ---[ end trace bc3c86ef609281aa ]--- # 1.2. chip_name returns 'none' if the chip is still pending Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> metadata: git branch: master git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git git describe: next-20210330 kernel-config: http://snapshots.linaro.org/openembedded/lkft/lkft/sumo/juno/lkft/linux-next/995/config https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20210407/testrun/4306292/suite/linux-log-parser/test/check-kernel-bug-2485709/log Full test log link, https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20210330/testrun/4268728/suite/linux-log-parser/test/check-kernel-bug-2463256/log git log --oneline next-20210326..next-20210330 -- tools/testing/selftests/gpio/ 9d940ab72645 selftests: gpio: add test cases for gpio-sim 8a4cb2823240 selftests: gpio: add a helper for reading GPIO line names ab1dbed6f4e8 selftests: gpio: provide a helper for reading chip info -- Linaro LKFT https://lkft.linaro.org ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [next] [arm64] [gpio] BUG: key has not been registered! DEBUG_LOCKS_WARN_ON: 2021-04-07 17:02 [next] [arm64] [gpio] BUG: key has not been registered! DEBUG_LOCKS_WARN_ON: Naresh Kamboju @ 2021-04-07 22:51 ` Andy Shevchenko 2021-04-08 8:33 ` Naresh Kamboju 0 siblings, 1 reply; 6+ messages in thread From: Andy Shevchenko @ 2021-04-07 22:51 UTC (permalink / raw) To: Naresh Kamboju Cc: open list:GPIO SUBSYSTEM, Linux-Next Mailing List, open list, lkft-triage, open list:KERNEL SELFTEST FRAMEWORK, Stephen Rothwell, Arnd Bergmann, Thomas Gleixner, Ingo Molnar, Peter Zijlstra, Colin King, Christian Brauner, Bartosz Golaszewski On Thu, Apr 8, 2021 at 12:38 AM Naresh Kamboju <naresh.kamboju@linaro.org> wrote: > > While running kselftest recently added gpio gpio-sim.sh test case the following > warning was triggered on Linux next tag 20210330 tag running on arm64 juno > and hikey devices. > > GOOD: next-20210326 > BAD: next-20210330 > > This is still happening today on Linux next tag 20210407. Can you add the following sysfs_attr_init(attrs[i]); to the end of the loop in gpio_sim_setup_sysfs()? If it fixes an issue I'll send a formal patch. -- With Best Regards, Andy Shevchenko ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [next] [arm64] [gpio] BUG: key has not been registered! DEBUG_LOCKS_WARN_ON: 2021-04-07 22:51 ` Andy Shevchenko @ 2021-04-08 8:33 ` Naresh Kamboju 2021-04-08 9:47 ` Andy Shevchenko 0 siblings, 1 reply; 6+ messages in thread From: Naresh Kamboju @ 2021-04-08 8:33 UTC (permalink / raw) To: Andy Shevchenko Cc: open list:GPIO SUBSYSTEM, Linux-Next Mailing List, open list, lkft-triage, open list:KERNEL SELFTEST FRAMEWORK, Stephen Rothwell, Arnd Bergmann, Thomas Gleixner, Ingo Molnar, Peter Zijlstra, Colin King, Christian Brauner, Bartosz Golaszewski On Thu, 8 Apr 2021 at 04:21, Andy Shevchenko <andy.shevchenko@gmail.com> wrote: > > On Thu, Apr 8, 2021 at 12:38 AM Naresh Kamboju > <naresh.kamboju@linaro.org> wrote: > > > > While running kselftest recently added gpio gpio-sim.sh test case the following > > warning was triggered on Linux next tag 20210330 tag running on arm64 juno > > and hikey devices. > > > > GOOD: next-20210326 > > BAD: next-20210330 > > > > This is still happening today on Linux next tag 20210407. > > Can you add the following > > sysfs_attr_init(attrs[i]); > > to the end of the loop in gpio_sim_setup_sysfs()? Do you mean like this, diff --git a/drivers/gpio/gpio-sim.c b/drivers/gpio/gpio-sim.c index ea17289a869c..5fe67ccf45f7 100644 --- a/drivers/gpio/gpio-sim.c +++ b/drivers/gpio/gpio-sim.c @@ -296,6 +296,7 @@ static int gpio_sim_setup_sysfs(struct gpio_sim_chip *chip) dev_attr->store = gpio_sim_sysfs_line_store; attrs[i] = &dev_attr->attr; + sysfs_attr_init(attrs[i]); } chip->attr_group.name = "line-ctrl"; > > If it fixes an issue I'll send a formal patch. I will build and test this and report here. - Naresh ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [next] [arm64] [gpio] BUG: key has not been registered! DEBUG_LOCKS_WARN_ON: 2021-04-08 8:33 ` Naresh Kamboju @ 2021-04-08 9:47 ` Andy Shevchenko 2021-04-08 12:59 ` Naresh Kamboju 0 siblings, 1 reply; 6+ messages in thread From: Andy Shevchenko @ 2021-04-08 9:47 UTC (permalink / raw) To: Naresh Kamboju Cc: open list:GPIO SUBSYSTEM, Linux-Next Mailing List, open list, lkft-triage, open list:KERNEL SELFTEST FRAMEWORK, Stephen Rothwell, Arnd Bergmann, Thomas Gleixner, Ingo Molnar, Peter Zijlstra, Colin King, Christian Brauner, Bartosz Golaszewski On Thu, Apr 8, 2021 at 11:33 AM Naresh Kamboju <naresh.kamboju@linaro.org> wrote: > On Thu, 8 Apr 2021 at 04:21, Andy Shevchenko <andy.shevchenko@gmail.com> wrote: > > On Thu, Apr 8, 2021 at 12:38 AM Naresh Kamboju > > <naresh.kamboju@linaro.org> wrote: > > > > > > While running kselftest recently added gpio gpio-sim.sh test case the following > > > warning was triggered on Linux next tag 20210330 tag running on arm64 juno > > > and hikey devices. > > > > > > GOOD: next-20210326 > > > BAD: next-20210330 > > > > > > This is still happening today on Linux next tag 20210407. > > > > Can you add the following > > > > sysfs_attr_init(attrs[i]); > > > > to the end of the loop in gpio_sim_setup_sysfs()? > > Do you mean like this, > > diff --git a/drivers/gpio/gpio-sim.c b/drivers/gpio/gpio-sim.c > index ea17289a869c..5fe67ccf45f7 100644 > --- a/drivers/gpio/gpio-sim.c > +++ b/drivers/gpio/gpio-sim.c > @@ -296,6 +296,7 @@ static int gpio_sim_setup_sysfs(struct gpio_sim_chip *chip) > dev_attr->store = gpio_sim_sysfs_line_store; > > attrs[i] = &dev_attr->attr; > + sysfs_attr_init(attrs[i]); > } > > chip->attr_group.name = "line-ctrl"; Precisely. > > If it fixes an issue I'll send a formal patch. > > I will build and test this and report here. Thanks! -- With Best Regards, Andy Shevchenko ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [next] [arm64] [gpio] BUG: key has not been registered! DEBUG_LOCKS_WARN_ON: 2021-04-08 9:47 ` Andy Shevchenko @ 2021-04-08 12:59 ` Naresh Kamboju 2021-04-08 15:30 ` Andy Shevchenko 0 siblings, 1 reply; 6+ messages in thread From: Naresh Kamboju @ 2021-04-08 12:59 UTC (permalink / raw) To: Andy Shevchenko Cc: open list:GPIO SUBSYSTEM, Linux-Next Mailing List, open list, lkft-triage, open list:KERNEL SELFTEST FRAMEWORK, Stephen Rothwell, Arnd Bergmann, Thomas Gleixner, Ingo Molnar, Peter Zijlstra, Colin King, Christian Brauner, Bartosz Golaszewski On Thu, 8 Apr 2021 at 15:17, Andy Shevchenko <andy.shevchenko@gmail.com> wrote: > > On Thu, Apr 8, 2021 at 11:33 AM Naresh Kamboju > <naresh.kamboju@linaro.org> wrote: > > On Thu, 8 Apr 2021 at 04:21, Andy Shevchenko <andy.shevchenko@gmail.com> wrote: > > > On Thu, Apr 8, 2021 at 12:38 AM Naresh Kamboju > > > <naresh.kamboju@linaro.org> wrote: > > > > > > > > While running kselftest recently added gpio gpio-sim.sh test case the following > > > > warning was triggered on Linux next tag 20210330 tag running on arm64 juno > > > > and hikey devices. > > > > > > > > GOOD: next-20210326 > > > > BAD: next-20210330 > > > > > > > > This is still happening today on Linux next tag 20210407. > > > > > > Can you add the following > > > > > > sysfs_attr_init(attrs[i]); > > > > > > to the end of the loop in gpio_sim_setup_sysfs()? > > > > Do you mean like this, > > > > diff --git a/drivers/gpio/gpio-sim.c b/drivers/gpio/gpio-sim.c > > index ea17289a869c..5fe67ccf45f7 100644 > > --- a/drivers/gpio/gpio-sim.c > > +++ b/drivers/gpio/gpio-sim.c > > @@ -296,6 +296,7 @@ static int gpio_sim_setup_sysfs(struct gpio_sim_chip *chip) > > dev_attr->store = gpio_sim_sysfs_line_store; > > > > attrs[i] = &dev_attr->attr; > > + sysfs_attr_init(attrs[i]); > > } > > > > chip->attr_group.name = "line-ctrl"; > > Precisely. As per your suggestions the above line added and build tested the reported issue is fixed now. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> > > > > If it fixes an issue I'll send a formal patch. > > > > I will build and test this and report here. OTOH, LKFT builds kernel and rootfs on host and runs tests on various target devices. While doing this process "make install" is not installing required test files like gpio-mockup-cdev and gpio-line-name. # ./gpio-mockup.sh: line 106: ./gpio-mockup-cdev: No such file or directory # ./gpio-sim.sh: line 100: ./gpio-line-name: No such file or directory Test run log: ------------------ # selftests: gpio: gpio-mockup.sh # 1. Module load tests # 1.1. dynamic allocation of gpio # ./gpio-mockup.sh: line 106: ./gpio-mockup-cdev: No such file or directory # test failed: line value is 127 when 1 was expected # GPIO gpio-mockup test FAIL not ok 1 selftests: gpio: gpio-mockup.sh # exit=1 # selftests: gpio: gpio-sim.sh # 1. chip_name and dev_name attributes # 1.1. Chip name is communicated to user # 1.2. chip_name returns 'none' if the chip is still pending # 1.3. Device name is communicated to user # 1.4. dev_name returns 'none' if chip is still pending # 2. Creating simulated chips # 2.1. Default number of lines is 1 # 2.2. Number of lines can be specified # 2.3. Label can be set # 2.4. Label can be left empty # 2.5. Line names can be configured # ./gpio-sim.sh: line 100: ./gpio-line-name: No such file or directory # line name is incorrect # GPIO gpio-sim test FAIL not ok 2 selftests: gpio: gpio-sim.sh # exit=1 - Naresh ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [next] [arm64] [gpio] BUG: key has not been registered! DEBUG_LOCKS_WARN_ON: 2021-04-08 12:59 ` Naresh Kamboju @ 2021-04-08 15:30 ` Andy Shevchenko 0 siblings, 0 replies; 6+ messages in thread From: Andy Shevchenko @ 2021-04-08 15:30 UTC (permalink / raw) To: Naresh Kamboju Cc: open list:GPIO SUBSYSTEM, Linux-Next Mailing List, open list, lkft-triage, open list:KERNEL SELFTEST FRAMEWORK, Stephen Rothwell, Arnd Bergmann, Thomas Gleixner, Ingo Molnar, Peter Zijlstra, Colin King, Christian Brauner, Bartosz Golaszewski On Thu, Apr 8, 2021 at 3:59 PM Naresh Kamboju <naresh.kamboju@linaro.org> wrote: > On Thu, 8 Apr 2021 at 15:17, Andy Shevchenko <andy.shevchenko@gmail.com> wrote: > > On Thu, Apr 8, 2021 at 11:33 AM Naresh Kamboju > > <naresh.kamboju@linaro.org> wrote: > > > On Thu, 8 Apr 2021 at 04:21, Andy Shevchenko <andy.shevchenko@gmail.com> wrote: > > > > On Thu, Apr 8, 2021 at 12:38 AM Naresh Kamboju > > > > <naresh.kamboju@linaro.org> wrote: > > > > > > > > > > While running kselftest recently added gpio gpio-sim.sh test case the following > > > > > warning was triggered on Linux next tag 20210330 tag running on arm64 juno > > > > > and hikey devices. > > > > > > > > > > GOOD: next-20210326 > > > > > BAD: next-20210330 > > > > > > > > > > This is still happening today on Linux next tag 20210407. > > > > > > > > Can you add the following > > > > > > > > sysfs_attr_init(attrs[i]); > > > > > > > > to the end of the loop in gpio_sim_setup_sysfs()? > > > > > > Do you mean like this, > > > > > > diff --git a/drivers/gpio/gpio-sim.c b/drivers/gpio/gpio-sim.c > > > index ea17289a869c..5fe67ccf45f7 100644 > > > --- a/drivers/gpio/gpio-sim.c > > > +++ b/drivers/gpio/gpio-sim.c > > > @@ -296,6 +296,7 @@ static int gpio_sim_setup_sysfs(struct gpio_sim_chip *chip) > > > dev_attr->store = gpio_sim_sysfs_line_store; > > > > > > attrs[i] = &dev_attr->attr; > > > + sysfs_attr_init(attrs[i]); > > > } > > > > > > chip->attr_group.name = "line-ctrl"; > > > > Precisely. > > As per your suggestions the above line added and build tested > the reported issue is fixed now. > > Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> > Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Thanks, I'll send a formal patch. The rest I leave for Bart to figure out what to do. -- With Best Regards, Andy Shevchenko ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-04-08 15:30 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-04-07 17:02 [next] [arm64] [gpio] BUG: key has not been registered! DEBUG_LOCKS_WARN_ON: Naresh Kamboju 2021-04-07 22:51 ` Andy Shevchenko 2021-04-08 8:33 ` Naresh Kamboju 2021-04-08 9:47 ` Andy Shevchenko 2021-04-08 12:59 ` Naresh Kamboju 2021-04-08 15:30 ` Andy Shevchenko
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).