* [REGRESSION] kselftest: next-20200915
@ 2020-09-15 17:44 LKFT
2020-09-15 17:54 ` Justin Cook
[not found] ` <CANKHsTfyE64ygNB0H0Nx=P63D-kqYa6aGOXS6ZmNUspLJJtS=Q@mail.gmail.com>
0 siblings, 2 replies; 5+ messages in thread
From: LKFT @ 2020-09-15 17:44 UTC (permalink / raw)
To: lkft, lkft-triage, linux-kselftest, linux-next; +Cc: sfr, shuah
## Kernel
* kernel: 5.9.0-rc5
* git repo: ['https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git', 'https://gitlab.com/Linaro/lkft/mirrors/next/linux-next']
* git branch: master
* git commit: 6b02addb1d1748d21dd1261e46029b264be4e5a0
* git describe: next-20200915
* Test details: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20200915
## Regressions (compared to build next-20200914)
juno-r2:
kselftest:
* memfd_memfd_test
x86:
kselftest-vsyscall-mode-native:
* kvm_vmx_preemption_timer_test
## Fixes (compared to build next-20200914)
x86:
kselftest-vsyscall-mode-none:
* kvm_vmx_preemption_timer_test
## Summary
### hi6220-hikey, kselftest
* total: 161
* pass: 53
* fail: 79
* skip: 29
* xfail: 0
### i386, kselftest
* total: 166
* pass: 35
* fail: 102
* skip: 29
* xfail: 0
### juno-r2, kselftest
* total: 163
* pass: 57
* fail: 77
* skip: 29
* xfail: 0
### x86, kselftest
* total: 167
* pass: 59
* fail: 81
* skip: 27
* xfail: 0
### x86, kselftest-vsyscall-mode-native
* total: 168
* pass: 61
* fail: 80
* skip: 27
* xfail: 0
### x86, kselftest-vsyscall-mode-none
* total: 164
* pass: 58
* fail: 79
* skip: 27
* xfail: 0
## Environments
* dragonboard-410c
* hi6220-hikey
* i386
* juno-r2
* juno-r2-compat
* juno-r2-kasan
* nxp-ls2088
* qemu_arm
* qemu_arm64
* qemu_i386
* qemu_x86_64
* x15
* x86
* x86-kasan
## Suites
* kselftest
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
## Failures
### hi6220-hikey, kselftest
* bpf_test_verifier
* bpf_test_tag
* bpf_test_maps
* bpf_test_lpm_map
* bpf_test_progs
* bpf_test_dev_cgroup
* bpf_test_tcpbpf_user
* bpf_test_sysctl
* bpf_test_progs-no_alu32
* bpf_test_kmod.sh
* bpf_test_sock_addr.sh
* bpf_test_tunnel.sh
* bpf_test_lwt_seg6local.sh
* bpf_test_flow_dissector.sh
* bpf_test_lwt_ip_encap.sh
* bpf_test_tcp_check_syncookie.sh
* bpf_test_tc_tunnel.sh
* bpf_test_tc_edt.sh
* bpf_test_xdping.sh
* bpf_test_bpftool.sh
* clone3_clone3_cap_checkpoint_restore
* core_close_range_test
* firmware_fw_run_tests.sh
* ftrace_ftracetest
* lkdtm_BUG.sh
* lkdtm_WARNING.sh
* lkdtm_WARNING_MESSAGE.sh
* lkdtm_EXCEPTION.sh
* lkdtm_CORRUPT_LIST_ADD.sh
* lkdtm_CORRUPT_LIST_DEL.sh
* lkdtm_STACK_GUARD_PAGE_LEADING.sh
* lkdtm_STACK_GUARD_PAGE_TRAILING.sh
* lkdtm_UNSET_SMEP.sh
* lkdtm_CORRUPT_PAC.sh
* lkdtm_UNALIGNED_LOAD_STORE_WRITE.sh
* lkdtm_READ_AFTER_FREE.sh
* lkdtm_READ_BUDDY_AFTER_FREE.sh
* lkdtm_SLAB_FREE_DOUBLE.sh
* lkdtm_SLAB_FREE_CROSS.sh
* lkdtm_SLAB_FREE_PAGE.sh
* lkdtm_EXEC_DATA.sh
* lkdtm_EXEC_STACK.sh
* lkdtm_EXEC_KMALLOC.sh
* lkdtm_EXEC_VMALLOC.sh
* lkdtm_EXEC_RODATA.sh
* lkdtm_EXEC_USERSPACE.sh
* lkdtm_EXEC_NULL.sh
* lkdtm_ACCESS_USERSPACE.sh
* lkdtm_ACCESS_NULL.sh
* lkdtm_WRITE_RO.sh
* lkdtm_WRITE_RO_AFTER_INIT.sh
* lkdtm_WRITE_KERN.sh
* lkdtm_REFCOUNT_INC_OVERFLOW.sh
* lkdtm_REFCOUNT_ADD_OVERFLOW.sh
* lkdtm_REFCOUNT_INC_NOT_ZERO_OVERFLOW.sh
* lkdtm_REFCOUNT_ADD_NOT_ZERO_OVERFLOW.sh
* lkdtm_REFCOUNT_DEC_ZERO.sh
* lkdtm_REFCOUNT_DEC_NEGATIVE.sh
* lkdtm_REFCOUNT_DEC_AND_TEST_NEGATIVE.sh
* lkdtm_REFCOUNT_SUB_AND_TEST_NEGATIVE.sh
* lkdtm_REFCOUNT_INC_ZERO.sh
* lkdtm_REFCOUNT_ADD_ZERO.sh
* lkdtm_REFCOUNT_INC_SATURATED.sh
* lkdtm_REFCOUNT_DEC_SATURATED.sh
* lkdtm_REFCOUNT_ADD_SATURATED.sh
* lkdtm_REFCOUNT_INC_NOT_ZERO_SATURATED.sh
* lkdtm_REFCOUNT_ADD_NOT_ZERO_SATURATED.sh
* lkdtm_REFCOUNT_DEC_AND_TEST_SATURATED.sh
* lkdtm_REFCOUNT_SUB_AND_TEST_SATURATED.sh
* lkdtm_USERCOPY_HEAP_SIZE_TO.sh
* lkdtm_USERCOPY_HEAP_SIZE_FROM.sh
* lkdtm_USERCOPY_HEAP_WHITELIST_TO.sh
* lkdtm_USERCOPY_HEAP_WHITELIST_FROM.sh
* lkdtm_USERCOPY_STACK_FRAME_TO.sh
* lkdtm_USERCOPY_STACK_FRAME_FROM.sh
* lkdtm_USERCOPY_STACK_BEYOND.sh
* lkdtm_USERCOPY_KERNEL.sh
* lkdtm_STACKLEAK_ERASING.sh
* lkdtm_CFI_FORWARD_PROTO.sh
### i386, kselftest
* bpf_test_progs
* bpf_test_dev_cgroup
* bpf_test_tcpbpf_user
* bpf_get_cgroup_id_user
* bpf_test_socket_cookie
* bpf_test_netcnt
* bpf_test_tcpnotify_user
* bpf_test_sock_fields
* bpf_test_sysctl
* bpf_test_progs-no_alu32
* bpf_test_sock_addr.sh
* bpf_test_tunnel.sh
* bpf_test_lwt_seg6local.sh
* bpf_test_flow_dissector.sh
* bpf_test_tc_tunnel.sh
* bpf_test_xdping.sh
* bpf_test_bpftool.sh
* clone3_clone3_clear_sighand
* clone3_clone3_cap_checkpoint_restore
* core_close_range_test
* firmware_fw_run_tests.sh
* ftrace_ftracetest
* intel_pstate_run.sh
* kvm_cr4_cpuid_sync_test
* kvm_evmcs_test
* kvm_hyperv_cpuid
* kvm_mmio_warning_test
* kvm_platform_info_test
* kvm_set_sregs_test
* kvm_smm_test
* kvm_state_test
* kvm_vmx_preemption_timer_test
* kvm_svm_vmcall_test
* kvm_sync_regs_test
* kvm_vmx_close_while_nested_test
* kvm_vmx_dirty_log_test
* kvm_vmx_set_nested_state_test
* kvm_vmx_tsc_adjust_test
* kvm_xss_msr_test
* kvm_debug_regs
* kvm_clear_dirty_log_test
* kvm_demand_paging_test
* kvm_dirty_log_test
* kvm_kvm_create_max_vcpus
* kvm_set_memory_region_test
* kvm_steal_time
* lkdtm_BUG.sh
* lkdtm_WARNING.sh
* lkdtm_WARNING_MESSAGE.sh
* lkdtm_EXCEPTION.sh
* lkdtm_CORRUPT_LIST_ADD.sh
* lkdtm_CORRUPT_LIST_DEL.sh
* lkdtm_STACK_GUARD_PAGE_LEADING.sh
* lkdtm_STACK_GUARD_PAGE_TRAILING.sh
* lkdtm_UNSET_SMEP.sh
* lkdtm_DOUBLE_FAULT.sh
* lkdtm_CORRUPT_PAC.sh
* lkdtm_UNALIGNED_LOAD_STORE_WRITE.sh
* lkdtm_READ_AFTER_FREE.sh
* lkdtm_READ_BUDDY_AFTER_FREE.sh
* lkdtm_SLAB_FREE_DOUBLE.sh
* lkdtm_SLAB_FREE_CROSS.sh
* lkdtm_SLAB_FREE_PAGE.sh
* lkdtm_EXEC_DATA.sh
* lkdtm_EXEC_STACK.sh
* lkdtm_EXEC_KMALLOC.sh
* lkdtm_EXEC_VMALLOC.sh
* lkdtm_EXEC_RODATA.sh
* lkdtm_EXEC_USERSPACE.sh
* lkdtm_EXEC_NULL.sh
* lkdtm_ACCESS_USERSPACE.sh
* lkdtm_ACCESS_NULL.sh
* lkdtm_WRITE_RO.sh
* lkdtm_WRITE_RO_AFTER_INIT.sh
* lkdtm_WRITE_KERN.sh
* lkdtm_REFCOUNT_INC_OVERFLOW.sh
* lkdtm_REFCOUNT_ADD_OVERFLOW.sh
* lkdtm_REFCOUNT_INC_NOT_ZERO_OVERFLOW.sh
* lkdtm_REFCOUNT_ADD_NOT_ZERO_OVERFLOW.sh
* lkdtm_REFCOUNT_DEC_ZERO.sh
* lkdtm_REFCOUNT_DEC_NEGATIVE.sh
* lkdtm_REFCOUNT_DEC_AND_TEST_NEGATIVE.sh
* lkdtm_REFCOUNT_SUB_AND_TEST_NEGATIVE.sh
* lkdtm_REFCOUNT_INC_ZERO.sh
* lkdtm_REFCOUNT_ADD_ZERO.sh
* lkdtm_REFCOUNT_INC_SATURATED.sh
* lkdtm_REFCOUNT_DEC_SATURATED.sh
* lkdtm_REFCOUNT_ADD_SATURATED.sh
* lkdtm_REFCOUNT_INC_NOT_ZERO_SATURATED.sh
* lkdtm_REFCOUNT_ADD_NOT_ZERO_SATURATED.sh
* lkdtm_REFCOUNT_DEC_AND_TEST_SATURATED.sh
* lkdtm_REFCOUNT_SUB_AND_TEST_SATURATED.sh
* lkdtm_USERCOPY_HEAP_SIZE_TO.sh
* lkdtm_USERCOPY_HEAP_SIZE_FROM.sh
* lkdtm_USERCOPY_HEAP_WHITELIST_TO.sh
* lkdtm_USERCOPY_HEAP_WHITELIST_FROM.sh
* lkdtm_USERCOPY_STACK_FRAME_TO.sh
* lkdtm_USERCOPY_STACK_FRAME_FROM.sh
* lkdtm_USERCOPY_STACK_BEYOND.sh
* lkdtm_USERCOPY_KERNEL.sh
* lkdtm_STACKLEAK_ERASING.sh
* lkdtm_CFI_FORWARD_PROTO.sh
### juno-r2, kselftest
* bpf_test_maps
* bpf_get_cgroup_id_user
* bpf_test_socket_cookie
* bpf_test_netcnt
* bpf_test_tcpnotify_user
* bpf_test_sysctl
* bpf_test_progs-no_alu32
* bpf_test_sock_addr.sh
* bpf_test_tunnel.sh
* bpf_test_lwt_seg6local.sh
* bpf_test_flow_dissector.sh
* bpf_test_lwt_ip_encap.sh
* bpf_test_tcp_check_syncookie.sh
* bpf_test_tc_tunnel.sh
* bpf_test_tc_edt.sh
* bpf_test_xdping.sh
* bpf_test_bpftool.sh
* clone3_clone3_cap_checkpoint_restore
* core_close_range_test
* cpufreq_main.sh
* firmware_fw_run_tests.sh
* ftrace_ftracetest
* lkdtm_BUG.sh
* lkdtm_WARNING.sh
* lkdtm_WARNING_MESSAGE.sh
* lkdtm_EXCEPTION.sh
* lkdtm_CORRUPT_LIST_ADD.sh
* lkdtm_CORRUPT_LIST_DEL.sh
* lkdtm_STACK_GUARD_PAGE_LEADING.sh
* lkdtm_STACK_GUARD_PAGE_TRAILING.sh
* lkdtm_UNSET_SMEP.sh
* lkdtm_CORRUPT_PAC.sh
* lkdtm_UNALIGNED_LOAD_STORE_WRITE.sh
* lkdtm_READ_AFTER_FREE.sh
* lkdtm_READ_BUDDY_AFTER_FREE.sh
* lkdtm_SLAB_FREE_DOUBLE.sh
* lkdtm_SLAB_FREE_CROSS.sh
* lkdtm_SLAB_FREE_PAGE.sh
* lkdtm_EXEC_DATA.sh
* lkdtm_EXEC_STACK.sh
* lkdtm_EXEC_KMALLOC.sh
* lkdtm_EXEC_VMALLOC.sh
* lkdtm_EXEC_RODATA.sh
* lkdtm_EXEC_USERSPACE.sh
* lkdtm_EXEC_NULL.sh
* lkdtm_ACCESS_USERSPACE.sh
* lkdtm_ACCESS_NULL.sh
* lkdtm_WRITE_RO.sh
* lkdtm_WRITE_RO_AFTER_INIT.sh
* lkdtm_WRITE_KERN.sh
* lkdtm_REFCOUNT_INC_OVERFLOW.sh
* lkdtm_REFCOUNT_ADD_OVERFLOW.sh
* lkdtm_REFCOUNT_INC_NOT_ZERO_OVERFLOW.sh
* lkdtm_REFCOUNT_ADD_NOT_ZERO_OVERFLOW.sh
* lkdtm_REFCOUNT_DEC_ZERO.sh
* lkdtm_REFCOUNT_DEC_NEGATIVE.sh
* lkdtm_REFCOUNT_DEC_AND_TEST_NEGATIVE.sh
* lkdtm_REFCOUNT_SUB_AND_TEST_NEGATIVE.sh
* lkdtm_REFCOUNT_INC_ZERO.sh
* lkdtm_REFCOUNT_ADD_ZERO.sh
* lkdtm_REFCOUNT_INC_SATURATED.sh
* lkdtm_REFCOUNT_DEC_SATURATED.sh
* lkdtm_REFCOUNT_ADD_SATURATED.sh
* lkdtm_REFCOUNT_INC_NOT_ZERO_SATURATED.sh
* lkdtm_REFCOUNT_ADD_NOT_ZERO_SATURATED.sh
* lkdtm_REFCOUNT_DEC_AND_TEST_SATURATED.sh
* lkdtm_REFCOUNT_SUB_AND_TEST_SATURATED.sh
* lkdtm_USERCOPY_HEAP_SIZE_TO.sh
* lkdtm_USERCOPY_HEAP_SIZE_FROM.sh
* lkdtm_USERCOPY_HEAP_WHITELIST_TO.sh
* lkdtm_USERCOPY_HEAP_WHITELIST_FROM.sh
* lkdtm_USERCOPY_STACK_FRAME_TO.sh
* lkdtm_USERCOPY_STACK_FRAME_FROM.sh
* lkdtm_USERCOPY_STACK_BEYOND.sh
* lkdtm_USERCOPY_KERNEL.sh
* lkdtm_STACKLEAK_ERASING.sh
* lkdtm_CFI_FORWARD_PROTO.sh
### x86, kselftest
* bpf_test_progs
* bpf_test_dev_cgroup
* bpf_test_tcpbpf_user
* bpf_get_cgroup_id_user
* bpf_test_socket_cookie
* bpf_test_netcnt
* bpf_test_tcpnotify_user
* bpf_test_sock_fields
* bpf_test_sysctl
* bpf_test_progs-no_alu32
* bpf_test_sock_addr.sh
* bpf_test_tunnel.sh
* bpf_test_lwt_seg6local.sh
* bpf_test_flow_dissector.sh
* bpf_test_lwt_ip_encap.sh
* bpf_test_tc_tunnel.sh
* bpf_test_tc_edt.sh
* bpf_test_xdping.sh
* bpf_test_bpftool.sh
* clone3_clone3_cap_checkpoint_restore
* core_close_range_test
* firmware_fw_run_tests.sh
* ftrace_ftracetest
* intel_pstate_run.sh
* kvm_vmx_preemption_timer_test
* kvm_debug_regs
* lkdtm_BUG.sh
* lkdtm_WARNING.sh
* lkdtm_WARNING_MESSAGE.sh
* lkdtm_EXCEPTION.sh
* lkdtm_CORRUPT_LIST_ADD.sh
* lkdtm_CORRUPT_LIST_DEL.sh
* lkdtm_STACK_GUARD_PAGE_LEADING.sh
* lkdtm_STACK_GUARD_PAGE_TRAILING.sh
* lkdtm_UNSET_SMEP.sh
* lkdtm_CORRUPT_PAC.sh
* lkdtm_UNALIGNED_LOAD_STORE_WRITE.sh
* lkdtm_READ_AFTER_FREE.sh
* lkdtm_READ_BUDDY_AFTER_FREE.sh
* lkdtm_SLAB_FREE_DOUBLE.sh
* lkdtm_SLAB_FREE_CROSS.sh
* lkdtm_SLAB_FREE_PAGE.sh
* lkdtm_EXEC_DATA.sh
* lkdtm_EXEC_STACK.sh
* lkdtm_EXEC_KMALLOC.sh
* lkdtm_EXEC_VMALLOC.sh
* lkdtm_EXEC_RODATA.sh
* lkdtm_EXEC_USERSPACE.sh
* lkdtm_EXEC_NULL.sh
* lkdtm_ACCESS_USERSPACE.sh
* lkdtm_ACCESS_NULL.sh
* lkdtm_WRITE_RO.sh
* lkdtm_WRITE_RO_AFTER_INIT.sh
* lkdtm_WRITE_KERN.sh
* lkdtm_REFCOUNT_INC_OVERFLOW.sh
* lkdtm_REFCOUNT_ADD_OVERFLOW.sh
* lkdtm_REFCOUNT_INC_NOT_ZERO_OVERFLOW.sh
* lkdtm_REFCOUNT_ADD_NOT_ZERO_OVERFLOW.sh
* lkdtm_REFCOUNT_DEC_ZERO.sh
* lkdtm_REFCOUNT_DEC_NEGATIVE.sh
* lkdtm_REFCOUNT_DEC_AND_TEST_NEGATIVE.sh
* lkdtm_REFCOUNT_SUB_AND_TEST_NEGATIVE.sh
* lkdtm_REFCOUNT_INC_ZERO.sh
* lkdtm_REFCOUNT_ADD_ZERO.sh
* lkdtm_REFCOUNT_INC_SATURATED.sh
* lkdtm_REFCOUNT_DEC_SATURATED.sh
* lkdtm_REFCOUNT_ADD_SATURATED.sh
* lkdtm_REFCOUNT_INC_NOT_ZERO_SATURATED.sh
* lkdtm_REFCOUNT_ADD_NOT_ZERO_SATURATED.sh
* lkdtm_REFCOUNT_DEC_AND_TEST_SATURATED.sh
* lkdtm_REFCOUNT_SUB_AND_TEST_SATURATED.sh
* lkdtm_USERCOPY_HEAP_SIZE_TO.sh
* lkdtm_USERCOPY_HEAP_SIZE_FROM.sh
* lkdtm_USERCOPY_HEAP_WHITELIST_TO.sh
* lkdtm_USERCOPY_HEAP_WHITELIST_FROM.sh
* lkdtm_USERCOPY_STACK_FRAME_TO.sh
* lkdtm_USERCOPY_STACK_FRAME_FROM.sh
* lkdtm_USERCOPY_STACK_BEYOND.sh
* lkdtm_USERCOPY_KERNEL.sh
* lkdtm_STACKLEAK_ERASING.sh
* lkdtm_CFI_FORWARD_PROTO.sh
### x86, kselftest-vsyscall-mode-native
* bpf_test_progs
* bpf_test_dev_cgroup
* bpf_test_tcpbpf_user
* bpf_get_cgroup_id_user
* bpf_test_socket_cookie
* bpf_test_netcnt
* bpf_test_tcpnotify_user
* bpf_test_sock_fields
* bpf_test_sysctl
* bpf_test_progs-no_alu32
* bpf_test_sock_addr.sh
* bpf_test_tunnel.sh
* bpf_test_lwt_seg6local.sh
* bpf_test_flow_dissector.sh
* bpf_test_lwt_ip_encap.sh
* bpf_test_tc_tunnel.sh
* bpf_test_tc_edt.sh
* bpf_test_xdping.sh
* bpf_test_bpftool.sh
* clone3_clone3_cap_checkpoint_restore
* core_close_range_test
* firmware_fw_run_tests.sh
* ftrace_ftracetest
* intel_pstate_run.sh
* kvm_debug_regs
* lkdtm_BUG.sh
* lkdtm_WARNING.sh
* lkdtm_WARNING_MESSAGE.sh
* lkdtm_EXCEPTION.sh
* lkdtm_CORRUPT_LIST_ADD.sh
* lkdtm_CORRUPT_LIST_DEL.sh
* lkdtm_STACK_GUARD_PAGE_LEADING.sh
* lkdtm_STACK_GUARD_PAGE_TRAILING.sh
* lkdtm_UNSET_SMEP.sh
* lkdtm_CORRUPT_PAC.sh
* lkdtm_UNALIGNED_LOAD_STORE_WRITE.sh
* lkdtm_READ_AFTER_FREE.sh
* lkdtm_READ_BUDDY_AFTER_FREE.sh
* lkdtm_SLAB_FREE_DOUBLE.sh
* lkdtm_SLAB_FREE_CROSS.sh
* lkdtm_SLAB_FREE_PAGE.sh
* lkdtm_EXEC_DATA.sh
* lkdtm_EXEC_STACK.sh
* lkdtm_EXEC_KMALLOC.sh
* lkdtm_EXEC_VMALLOC.sh
* lkdtm_EXEC_RODATA.sh
* lkdtm_EXEC_USERSPACE.sh
* lkdtm_EXEC_NULL.sh
* lkdtm_ACCESS_USERSPACE.sh
* lkdtm_ACCESS_NULL.sh
* lkdtm_WRITE_RO.sh
* lkdtm_WRITE_RO_AFTER_INIT.sh
* lkdtm_WRITE_KERN.sh
* lkdtm_REFCOUNT_INC_OVERFLOW.sh
* lkdtm_REFCOUNT_ADD_OVERFLOW.sh
* lkdtm_REFCOUNT_INC_NOT_ZERO_OVERFLOW.sh
* lkdtm_REFCOUNT_ADD_NOT_ZERO_OVERFLOW.sh
* lkdtm_REFCOUNT_DEC_ZERO.sh
* lkdtm_REFCOUNT_DEC_NEGATIVE.sh
* lkdtm_REFCOUNT_DEC_AND_TEST_NEGATIVE.sh
* lkdtm_REFCOUNT_SUB_AND_TEST_NEGATIVE.sh
* lkdtm_REFCOUNT_INC_ZERO.sh
* lkdtm_REFCOUNT_ADD_ZERO.sh
* lkdtm_REFCOUNT_INC_SATURATED.sh
* lkdtm_REFCOUNT_DEC_SATURATED.sh
* lkdtm_REFCOUNT_ADD_SATURATED.sh
* lkdtm_REFCOUNT_INC_NOT_ZERO_SATURATED.sh
* lkdtm_REFCOUNT_ADD_NOT_ZERO_SATURATED.sh
* lkdtm_REFCOUNT_DEC_AND_TEST_SATURATED.sh
* lkdtm_REFCOUNT_SUB_AND_TEST_SATURATED.sh
* lkdtm_USERCOPY_HEAP_SIZE_TO.sh
* lkdtm_USERCOPY_HEAP_SIZE_FROM.sh
* lkdtm_USERCOPY_HEAP_WHITELIST_TO.sh
* lkdtm_USERCOPY_HEAP_WHITELIST_FROM.sh
* lkdtm_USERCOPY_STACK_FRAME_TO.sh
* lkdtm_USERCOPY_STACK_FRAME_FROM.sh
* lkdtm_USERCOPY_STACK_BEYOND.sh
* lkdtm_USERCOPY_KERNEL.sh
* lkdtm_STACKLEAK_ERASING.sh
* lkdtm_CFI_FORWARD_PROTO.sh
### x86, kselftest-vsyscall-mode-none
* bpf_test_progs
* bpf_test_dev_cgroup
* bpf_test_tcpbpf_user
* bpf_get_cgroup_id_user
* bpf_test_tcpnotify_user
* bpf_test_sock_fields
* bpf_test_sysctl
* bpf_test_progs-no_alu32
* bpf_test_sock_addr.sh
* bpf_test_tunnel.sh
* bpf_test_lwt_seg6local.sh
* bpf_test_flow_dissector.sh
* bpf_test_lwt_ip_encap.sh
* bpf_test_tc_tunnel.sh
* bpf_test_tc_edt.sh
* bpf_test_xdping.sh
* bpf_test_bpftool.sh
* clone3_clone3_cap_checkpoint_restore
* core_close_range_test
* firmware_fw_run_tests.sh
* ftrace_ftracetest
* intel_pstate_run.sh
* kvm_vmx_preemption_timer_test
* kvm_debug_regs
* lkdtm_BUG.sh
* lkdtm_WARNING.sh
* lkdtm_WARNING_MESSAGE.sh
* lkdtm_EXCEPTION.sh
* lkdtm_CORRUPT_LIST_ADD.sh
* lkdtm_CORRUPT_LIST_DEL.sh
* lkdtm_STACK_GUARD_PAGE_LEADING.sh
* lkdtm_STACK_GUARD_PAGE_TRAILING.sh
* lkdtm_UNSET_SMEP.sh
* lkdtm_CORRUPT_PAC.sh
* lkdtm_UNALIGNED_LOAD_STORE_WRITE.sh
* lkdtm_READ_AFTER_FREE.sh
* lkdtm_READ_BUDDY_AFTER_FREE.sh
* lkdtm_SLAB_FREE_DOUBLE.sh
* lkdtm_SLAB_FREE_CROSS.sh
* lkdtm_SLAB_FREE_PAGE.sh
* lkdtm_EXEC_DATA.sh
* lkdtm_EXEC_STACK.sh
* lkdtm_EXEC_KMALLOC.sh
* lkdtm_EXEC_VMALLOC.sh
* lkdtm_EXEC_RODATA.sh
* lkdtm_EXEC_USERSPACE.sh
* lkdtm_EXEC_NULL.sh
* lkdtm_ACCESS_USERSPACE.sh
* lkdtm_ACCESS_NULL.sh
* lkdtm_WRITE_RO.sh
* lkdtm_WRITE_RO_AFTER_INIT.sh
* lkdtm_WRITE_KERN.sh
* lkdtm_REFCOUNT_INC_OVERFLOW.sh
* lkdtm_REFCOUNT_ADD_OVERFLOW.sh
* lkdtm_REFCOUNT_INC_NOT_ZERO_OVERFLOW.sh
* lkdtm_REFCOUNT_ADD_NOT_ZERO_OVERFLOW.sh
* lkdtm_REFCOUNT_DEC_ZERO.sh
* lkdtm_REFCOUNT_DEC_NEGATIVE.sh
* lkdtm_REFCOUNT_DEC_AND_TEST_NEGATIVE.sh
* lkdtm_REFCOUNT_SUB_AND_TEST_NEGATIVE.sh
* lkdtm_REFCOUNT_INC_ZERO.sh
* lkdtm_REFCOUNT_ADD_ZERO.sh
* lkdtm_REFCOUNT_INC_SATURATED.sh
* lkdtm_REFCOUNT_DEC_SATURATED.sh
* lkdtm_REFCOUNT_ADD_SATURATED.sh
* lkdtm_REFCOUNT_INC_NOT_ZERO_SATURATED.sh
* lkdtm_REFCOUNT_ADD_NOT_ZERO_SATURATED.sh
* lkdtm_REFCOUNT_DEC_AND_TEST_SATURATED.sh
* lkdtm_REFCOUNT_SUB_AND_TEST_SATURATED.sh
* lkdtm_USERCOPY_HEAP_SIZE_TO.sh
* lkdtm_USERCOPY_HEAP_SIZE_FROM.sh
* lkdtm_USERCOPY_HEAP_WHITELIST_TO.sh
* lkdtm_USERCOPY_HEAP_WHITELIST_FROM.sh
* lkdtm_USERCOPY_STACK_FRAME_TO.sh
* lkdtm_USERCOPY_STACK_FRAME_FROM.sh
* lkdtm_USERCOPY_STACK_BEYOND.sh
* lkdtm_USERCOPY_KERNEL.sh
* lkdtm_STACKLEAK_ERASING.sh
* lkdtm_CFI_FORWARD_PROTO.sh
## Skips
### hi6220-hikey, kselftest
* bpf_test_xdp_veth.sh
* cgroup_test_memcontrol
* cgroup_test_kmem
* cgroup_test_core
* cgroup_test_stress.sh
* efivarfs_efivarfs.sh
* fpu_run_test_fpu.sh
* intel_pstate_run.sh
* ir_ir_loopback.sh
* livepatch_test-livepatch.sh
* livepatch_test-callbacks.sh
* livepatch_test-shadow-vars.sh
* livepatch_test-state.sh
* livepatch_test-ftrace.sh
* lkdtm_PANIC.sh
* lkdtm_LOOP.sh
* lkdtm_EXHAUST_STACK.sh
* lkdtm_CORRUPT_STACK.sh
* lkdtm_CORRUPT_STACK_STRONG.sh
* lkdtm_DOUBLE_FAULT.sh
* lkdtm_OVERWRITE_ALLOCATION.sh
* lkdtm_WRITE_AFTER_FREE.sh
* lkdtm_WRITE_BUDDY_AFTER_FREE.sh
* lkdtm_SOFTLOCKUP.sh
* lkdtm_HARDLOCKUP.sh
* lkdtm_SPINLOCKUP.sh
* lkdtm_HUNG_TASK.sh
* lkdtm_REFCOUNT_TIMING.sh
* lkdtm_ATOMIC_TIMING.sh
### i386, kselftest
* bpf_test_xdp_veth.sh
* cgroup_test_memcontrol
* cgroup_test_kmem
* cgroup_test_core
* cgroup_test_stress.sh
* efivarfs_efivarfs.sh
* fpu_run_test_fpu.sh
* ir_ir_loopback.sh
* kexec_test_kexec_load.sh
* kexec_test_kexec_file_load.sh
* livepatch_test-livepatch.sh
* livepatch_test-callbacks.sh
* livepatch_test-shadow-vars.sh
* livepatch_test-state.sh
* livepatch_test-ftrace.sh
* lkdtm_PANIC.sh
* lkdtm_LOOP.sh
* lkdtm_EXHAUST_STACK.sh
* lkdtm_CORRUPT_STACK.sh
* lkdtm_CORRUPT_STACK_STRONG.sh
* lkdtm_OVERWRITE_ALLOCATION.sh
* lkdtm_WRITE_AFTER_FREE.sh
* lkdtm_WRITE_BUDDY_AFTER_FREE.sh
* lkdtm_SOFTLOCKUP.sh
* lkdtm_HARDLOCKUP.sh
* lkdtm_SPINLOCKUP.sh
* lkdtm_HUNG_TASK.sh
* lkdtm_REFCOUNT_TIMING.sh
* lkdtm_ATOMIC_TIMING.sh
### juno-r2, kselftest
* bpf_test_xdp_veth.sh
* cgroup_test_memcontrol
* cgroup_test_kmem
* cgroup_test_core
* cgroup_test_stress.sh
* efivarfs_efivarfs.sh
* fpu_run_test_fpu.sh
* intel_pstate_run.sh
* ir_ir_loopback.sh
* livepatch_test-livepatch.sh
* livepatch_test-callbacks.sh
* livepatch_test-shadow-vars.sh
* livepatch_test-state.sh
* livepatch_test-ftrace.sh
* lkdtm_PANIC.sh
* lkdtm_LOOP.sh
* lkdtm_EXHAUST_STACK.sh
* lkdtm_CORRUPT_STACK.sh
* lkdtm_CORRUPT_STACK_STRONG.sh
* lkdtm_DOUBLE_FAULT.sh
* lkdtm_OVERWRITE_ALLOCATION.sh
* lkdtm_WRITE_AFTER_FREE.sh
* lkdtm_WRITE_BUDDY_AFTER_FREE.sh
* lkdtm_SOFTLOCKUP.sh
* lkdtm_HARDLOCKUP.sh
* lkdtm_SPINLOCKUP.sh
* lkdtm_HUNG_TASK.sh
* lkdtm_REFCOUNT_TIMING.sh
* lkdtm_ATOMIC_TIMING.sh
### x86, kselftest
* bpf_test_xdp_veth.sh
* cgroup_test_memcontrol
* cgroup_test_kmem
* cgroup_test_core
* cgroup_test_stress.sh
* efivarfs_efivarfs.sh
* fpu_run_test_fpu.sh
* ir_ir_loopback.sh
* kexec_test_kexec_load.sh
* kexec_test_kexec_file_load.sh
* kvm_mmio_warning_test
* kvm_svm_vmcall_test
* lkdtm_PANIC.sh
* lkdtm_LOOP.sh
* lkdtm_EXHAUST_STACK.sh
* lkdtm_CORRUPT_STACK.sh
* lkdtm_CORRUPT_STACK_STRONG.sh
* lkdtm_DOUBLE_FAULT.sh
* lkdtm_OVERWRITE_ALLOCATION.sh
* lkdtm_WRITE_AFTER_FREE.sh
* lkdtm_WRITE_BUDDY_AFTER_FREE.sh
* lkdtm_SOFTLOCKUP.sh
* lkdtm_HARDLOCKUP.sh
* lkdtm_SPINLOCKUP.sh
* lkdtm_HUNG_TASK.sh
* lkdtm_REFCOUNT_TIMING.sh
* lkdtm_ATOMIC_TIMING.sh
### x86, kselftest-vsyscall-mode-native
* bpf_test_xdp_veth.sh
* cgroup_test_memcontrol
* cgroup_test_kmem
* cgroup_test_core
* cgroup_test_stress.sh
* efivarfs_efivarfs.sh
* fpu_run_test_fpu.sh
* ir_ir_loopback.sh
* kexec_test_kexec_load.sh
* kexec_test_kexec_file_load.sh
* kvm_mmio_warning_test
* kvm_svm_vmcall_test
* lkdtm_PANIC.sh
* lkdtm_LOOP.sh
* lkdtm_EXHAUST_STACK.sh
* lkdtm_CORRUPT_STACK.sh
* lkdtm_CORRUPT_STACK_STRONG.sh
* lkdtm_DOUBLE_FAULT.sh
* lkdtm_OVERWRITE_ALLOCATION.sh
* lkdtm_WRITE_AFTER_FREE.sh
* lkdtm_WRITE_BUDDY_AFTER_FREE.sh
* lkdtm_SOFTLOCKUP.sh
* lkdtm_HARDLOCKUP.sh
* lkdtm_SPINLOCKUP.sh
* lkdtm_HUNG_TASK.sh
* lkdtm_REFCOUNT_TIMING.sh
* lkdtm_ATOMIC_TIMING.sh
### x86, kselftest-vsyscall-mode-none
* bpf_test_xdp_veth.sh
* cgroup_test_memcontrol
* cgroup_test_kmem
* cgroup_test_core
* cgroup_test_stress.sh
* efivarfs_efivarfs.sh
* fpu_run_test_fpu.sh
* ir_ir_loopback.sh
* kexec_test_kexec_load.sh
* kexec_test_kexec_file_load.sh
* kvm_mmio_warning_test
* kvm_svm_vmcall_test
* lkdtm_PANIC.sh
* lkdtm_LOOP.sh
* lkdtm_EXHAUST_STACK.sh
* lkdtm_CORRUPT_STACK.sh
* lkdtm_CORRUPT_STACK_STRONG.sh
* lkdtm_DOUBLE_FAULT.sh
* lkdtm_OVERWRITE_ALLOCATION.sh
* lkdtm_WRITE_AFTER_FREE.sh
* lkdtm_WRITE_BUDDY_AFTER_FREE.sh
* lkdtm_SOFTLOCKUP.sh
* lkdtm_HARDLOCKUP.sh
* lkdtm_SPINLOCKUP.sh
* lkdtm_HUNG_TASK.sh
* lkdtm_REFCOUNT_TIMING.sh
* lkdtm_ATOMIC_TIMING.sh
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [REGRESSION] kselftest: next-20200915
2020-09-15 17:44 [REGRESSION] kselftest: next-20200915 LKFT
@ 2020-09-15 17:54 ` Justin Cook
[not found] ` <CANKHsTfyE64ygNB0H0Nx=P63D-kqYa6aGOXS6ZmNUspLJJtS=Q@mail.gmail.com>
1 sibling, 0 replies; 5+ messages in thread
From: Justin Cook @ 2020-09-15 17:54 UTC (permalink / raw)
To: LKFT; +Cc: lkft-triage, linux-kselftest, linux-next, sfr, shuah
Hello,
Linaro had previously been sending out a report based on our testing
of the linux kernel using kselftest. We paused sending that report to
fix a few issues. We are now continuing the process, starting with
this report.
If you have any questions, comments, feedback, or concerns please
email lkft@linaro.org.
Thanks,
Justin
On Tue, 15 Sep 2020 at 12:44, LKFT <lkft@linaro.org> wrote:
>
> ## Kernel
> * kernel: 5.9.0-rc5
> * git repo: ['https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git', 'https://gitlab.com/Linaro/lkft/mirrors/next/linux-next']
> * git branch: master
> * git commit: 6b02addb1d1748d21dd1261e46029b264be4e5a0
> * git describe: next-20200915
> * Test details: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20200915
>
> ## Regressions (compared to build next-20200914)
>
> juno-r2:
> kselftest:
> * memfd_memfd_test
>
> x86:
> kselftest-vsyscall-mode-native:
> * kvm_vmx_preemption_timer_test
>
> ## Fixes (compared to build next-20200914)
>
> x86:
> kselftest-vsyscall-mode-none:
> * kvm_vmx_preemption_timer_test
>
> ## Summary
> ### hi6220-hikey, kselftest
> * total: 161
> * pass: 53
> * fail: 79
> * skip: 29
> * xfail: 0
> ### i386, kselftest
> * total: 166
> * pass: 35
> * fail: 102
> * skip: 29
> * xfail: 0
> ### juno-r2, kselftest
> * total: 163
> * pass: 57
> * fail: 77
> * skip: 29
> * xfail: 0
> ### x86, kselftest
> * total: 167
> * pass: 59
> * fail: 81
> * skip: 27
> * xfail: 0
> ### x86, kselftest-vsyscall-mode-native
> * total: 168
> * pass: 61
> * fail: 80
> * skip: 27
> * xfail: 0
> ### x86, kselftest-vsyscall-mode-none
> * total: 164
> * pass: 58
> * fail: 79
> * skip: 27
> * xfail: 0
>
> ## Environments
> * dragonboard-410c
> * hi6220-hikey
> * i386
> * juno-r2
> * juno-r2-compat
> * juno-r2-kasan
> * nxp-ls2088
> * qemu_arm
> * qemu_arm64
> * qemu_i386
> * qemu_x86_64
> * x15
> * x86
> * x86-kasan
>
> ## Suites
> * kselftest
> * kselftest-vsyscall-mode-native
> * kselftest-vsyscall-mode-none
>
> ## Failures
> ### hi6220-hikey, kselftest
> * bpf_test_verifier
> * bpf_test_tag
> * bpf_test_maps
> * bpf_test_lpm_map
> * bpf_test_progs
> * bpf_test_dev_cgroup
> * bpf_test_tcpbpf_user
> * bpf_test_sysctl
> * bpf_test_progs-no_alu32
> * bpf_test_kmod.sh
> * bpf_test_sock_addr.sh
> * bpf_test_tunnel.sh
> * bpf_test_lwt_seg6local.sh
> * bpf_test_flow_dissector.sh
> * bpf_test_lwt_ip_encap.sh
> * bpf_test_tcp_check_syncookie.sh
> * bpf_test_tc_tunnel.sh
> * bpf_test_tc_edt.sh
> * bpf_test_xdping.sh
> * bpf_test_bpftool.sh
> * clone3_clone3_cap_checkpoint_restore
> * core_close_range_test
> * firmware_fw_run_tests.sh
> * ftrace_ftracetest
> * lkdtm_BUG.sh
> * lkdtm_WARNING.sh
> * lkdtm_WARNING_MESSAGE.sh
> * lkdtm_EXCEPTION.sh
> * lkdtm_CORRUPT_LIST_ADD.sh
> * lkdtm_CORRUPT_LIST_DEL.sh
> * lkdtm_STACK_GUARD_PAGE_LEADING.sh
> * lkdtm_STACK_GUARD_PAGE_TRAILING.sh
> * lkdtm_UNSET_SMEP.sh
> * lkdtm_CORRUPT_PAC.sh
> * lkdtm_UNALIGNED_LOAD_STORE_WRITE.sh
> * lkdtm_READ_AFTER_FREE.sh
> * lkdtm_READ_BUDDY_AFTER_FREE.sh
> * lkdtm_SLAB_FREE_DOUBLE.sh
> * lkdtm_SLAB_FREE_CROSS.sh
> * lkdtm_SLAB_FREE_PAGE.sh
> * lkdtm_EXEC_DATA.sh
> * lkdtm_EXEC_STACK.sh
> * lkdtm_EXEC_KMALLOC.sh
> * lkdtm_EXEC_VMALLOC.sh
> * lkdtm_EXEC_RODATA.sh
> * lkdtm_EXEC_USERSPACE.sh
> * lkdtm_EXEC_NULL.sh
> * lkdtm_ACCESS_USERSPACE.sh
> * lkdtm_ACCESS_NULL.sh
> * lkdtm_WRITE_RO.sh
> * lkdtm_WRITE_RO_AFTER_INIT.sh
> * lkdtm_WRITE_KERN.sh
> * lkdtm_REFCOUNT_INC_OVERFLOW.sh
> * lkdtm_REFCOUNT_ADD_OVERFLOW.sh
> * lkdtm_REFCOUNT_INC_NOT_ZERO_OVERFLOW.sh
> * lkdtm_REFCOUNT_ADD_NOT_ZERO_OVERFLOW.sh
> * lkdtm_REFCOUNT_DEC_ZERO.sh
> * lkdtm_REFCOUNT_DEC_NEGATIVE.sh
> * lkdtm_REFCOUNT_DEC_AND_TEST_NEGATIVE.sh
> * lkdtm_REFCOUNT_SUB_AND_TEST_NEGATIVE.sh
> * lkdtm_REFCOUNT_INC_ZERO.sh
> * lkdtm_REFCOUNT_ADD_ZERO.sh
> * lkdtm_REFCOUNT_INC_SATURATED.sh
> * lkdtm_REFCOUNT_DEC_SATURATED.sh
> * lkdtm_REFCOUNT_ADD_SATURATED.sh
> * lkdtm_REFCOUNT_INC_NOT_ZERO_SATURATED.sh
> * lkdtm_REFCOUNT_ADD_NOT_ZERO_SATURATED.sh
> * lkdtm_REFCOUNT_DEC_AND_TEST_SATURATED.sh
> * lkdtm_REFCOUNT_SUB_AND_TEST_SATURATED.sh
> * lkdtm_USERCOPY_HEAP_SIZE_TO.sh
> * lkdtm_USERCOPY_HEAP_SIZE_FROM.sh
> * lkdtm_USERCOPY_HEAP_WHITELIST_TO.sh
> * lkdtm_USERCOPY_HEAP_WHITELIST_FROM.sh
> * lkdtm_USERCOPY_STACK_FRAME_TO.sh
> * lkdtm_USERCOPY_STACK_FRAME_FROM.sh
> * lkdtm_USERCOPY_STACK_BEYOND.sh
> * lkdtm_USERCOPY_KERNEL.sh
> * lkdtm_STACKLEAK_ERASING.sh
> * lkdtm_CFI_FORWARD_PROTO.sh
> ### i386, kselftest
> * bpf_test_progs
> * bpf_test_dev_cgroup
> * bpf_test_tcpbpf_user
> * bpf_get_cgroup_id_user
> * bpf_test_socket_cookie
> * bpf_test_netcnt
> * bpf_test_tcpnotify_user
> * bpf_test_sock_fields
> * bpf_test_sysctl
> * bpf_test_progs-no_alu32
> * bpf_test_sock_addr.sh
> * bpf_test_tunnel.sh
> * bpf_test_lwt_seg6local.sh
> * bpf_test_flow_dissector.sh
> * bpf_test_tc_tunnel.sh
> * bpf_test_xdping.sh
> * bpf_test_bpftool.sh
> * clone3_clone3_clear_sighand
> * clone3_clone3_cap_checkpoint_restore
> * core_close_range_test
> * firmware_fw_run_tests.sh
> * ftrace_ftracetest
> * intel_pstate_run.sh
> * kvm_cr4_cpuid_sync_test
> * kvm_evmcs_test
> * kvm_hyperv_cpuid
> * kvm_mmio_warning_test
> * kvm_platform_info_test
> * kvm_set_sregs_test
> * kvm_smm_test
> * kvm_state_test
> * kvm_vmx_preemption_timer_test
> * kvm_svm_vmcall_test
> * kvm_sync_regs_test
> * kvm_vmx_close_while_nested_test
> * kvm_vmx_dirty_log_test
> * kvm_vmx_set_nested_state_test
> * kvm_vmx_tsc_adjust_test
> * kvm_xss_msr_test
> * kvm_debug_regs
> * kvm_clear_dirty_log_test
> * kvm_demand_paging_test
> * kvm_dirty_log_test
> * kvm_kvm_create_max_vcpus
> * kvm_set_memory_region_test
> * kvm_steal_time
> * lkdtm_BUG.sh
> * lkdtm_WARNING.sh
> * lkdtm_WARNING_MESSAGE.sh
> * lkdtm_EXCEPTION.sh
> * lkdtm_CORRUPT_LIST_ADD.sh
> * lkdtm_CORRUPT_LIST_DEL.sh
> * lkdtm_STACK_GUARD_PAGE_LEADING.sh
> * lkdtm_STACK_GUARD_PAGE_TRAILING.sh
> * lkdtm_UNSET_SMEP.sh
> * lkdtm_DOUBLE_FAULT.sh
> * lkdtm_CORRUPT_PAC.sh
> * lkdtm_UNALIGNED_LOAD_STORE_WRITE.sh
> * lkdtm_READ_AFTER_FREE.sh
> * lkdtm_READ_BUDDY_AFTER_FREE.sh
> * lkdtm_SLAB_FREE_DOUBLE.sh
> * lkdtm_SLAB_FREE_CROSS.sh
> * lkdtm_SLAB_FREE_PAGE.sh
> * lkdtm_EXEC_DATA.sh
> * lkdtm_EXEC_STACK.sh
> * lkdtm_EXEC_KMALLOC.sh
> * lkdtm_EXEC_VMALLOC.sh
> * lkdtm_EXEC_RODATA.sh
> * lkdtm_EXEC_USERSPACE.sh
> * lkdtm_EXEC_NULL.sh
> * lkdtm_ACCESS_USERSPACE.sh
> * lkdtm_ACCESS_NULL.sh
> * lkdtm_WRITE_RO.sh
> * lkdtm_WRITE_RO_AFTER_INIT.sh
> * lkdtm_WRITE_KERN.sh
> * lkdtm_REFCOUNT_INC_OVERFLOW.sh
> * lkdtm_REFCOUNT_ADD_OVERFLOW.sh
> * lkdtm_REFCOUNT_INC_NOT_ZERO_OVERFLOW.sh
> * lkdtm_REFCOUNT_ADD_NOT_ZERO_OVERFLOW.sh
> * lkdtm_REFCOUNT_DEC_ZERO.sh
> * lkdtm_REFCOUNT_DEC_NEGATIVE.sh
> * lkdtm_REFCOUNT_DEC_AND_TEST_NEGATIVE.sh
> * lkdtm_REFCOUNT_SUB_AND_TEST_NEGATIVE.sh
> * lkdtm_REFCOUNT_INC_ZERO.sh
> * lkdtm_REFCOUNT_ADD_ZERO.sh
> * lkdtm_REFCOUNT_INC_SATURATED.sh
> * lkdtm_REFCOUNT_DEC_SATURATED.sh
> * lkdtm_REFCOUNT_ADD_SATURATED.sh
> * lkdtm_REFCOUNT_INC_NOT_ZERO_SATURATED.sh
> * lkdtm_REFCOUNT_ADD_NOT_ZERO_SATURATED.sh
> * lkdtm_REFCOUNT_DEC_AND_TEST_SATURATED.sh
> * lkdtm_REFCOUNT_SUB_AND_TEST_SATURATED.sh
> * lkdtm_USERCOPY_HEAP_SIZE_TO.sh
> * lkdtm_USERCOPY_HEAP_SIZE_FROM.sh
> * lkdtm_USERCOPY_HEAP_WHITELIST_TO.sh
> * lkdtm_USERCOPY_HEAP_WHITELIST_FROM.sh
> * lkdtm_USERCOPY_STACK_FRAME_TO.sh
> * lkdtm_USERCOPY_STACK_FRAME_FROM.sh
> * lkdtm_USERCOPY_STACK_BEYOND.sh
> * lkdtm_USERCOPY_KERNEL.sh
> * lkdtm_STACKLEAK_ERASING.sh
> * lkdtm_CFI_FORWARD_PROTO.sh
> ### juno-r2, kselftest
> * bpf_test_maps
> * bpf_get_cgroup_id_user
> * bpf_test_socket_cookie
> * bpf_test_netcnt
> * bpf_test_tcpnotify_user
> * bpf_test_sysctl
> * bpf_test_progs-no_alu32
> * bpf_test_sock_addr.sh
> * bpf_test_tunnel.sh
> * bpf_test_lwt_seg6local.sh
> * bpf_test_flow_dissector.sh
> * bpf_test_lwt_ip_encap.sh
> * bpf_test_tcp_check_syncookie.sh
> * bpf_test_tc_tunnel.sh
> * bpf_test_tc_edt.sh
> * bpf_test_xdping.sh
> * bpf_test_bpftool.sh
> * clone3_clone3_cap_checkpoint_restore
> * core_close_range_test
> * cpufreq_main.sh
> * firmware_fw_run_tests.sh
> * ftrace_ftracetest
> * lkdtm_BUG.sh
> * lkdtm_WARNING.sh
> * lkdtm_WARNING_MESSAGE.sh
> * lkdtm_EXCEPTION.sh
> * lkdtm_CORRUPT_LIST_ADD.sh
> * lkdtm_CORRUPT_LIST_DEL.sh
> * lkdtm_STACK_GUARD_PAGE_LEADING.sh
> * lkdtm_STACK_GUARD_PAGE_TRAILING.sh
> * lkdtm_UNSET_SMEP.sh
> * lkdtm_CORRUPT_PAC.sh
> * lkdtm_UNALIGNED_LOAD_STORE_WRITE.sh
> * lkdtm_READ_AFTER_FREE.sh
> * lkdtm_READ_BUDDY_AFTER_FREE.sh
> * lkdtm_SLAB_FREE_DOUBLE.sh
> * lkdtm_SLAB_FREE_CROSS.sh
> * lkdtm_SLAB_FREE_PAGE.sh
> * lkdtm_EXEC_DATA.sh
> * lkdtm_EXEC_STACK.sh
> * lkdtm_EXEC_KMALLOC.sh
> * lkdtm_EXEC_VMALLOC.sh
> * lkdtm_EXEC_RODATA.sh
> * lkdtm_EXEC_USERSPACE.sh
> * lkdtm_EXEC_NULL.sh
> * lkdtm_ACCESS_USERSPACE.sh
> * lkdtm_ACCESS_NULL.sh
> * lkdtm_WRITE_RO.sh
> * lkdtm_WRITE_RO_AFTER_INIT.sh
> * lkdtm_WRITE_KERN.sh
> * lkdtm_REFCOUNT_INC_OVERFLOW.sh
> * lkdtm_REFCOUNT_ADD_OVERFLOW.sh
> * lkdtm_REFCOUNT_INC_NOT_ZERO_OVERFLOW.sh
> * lkdtm_REFCOUNT_ADD_NOT_ZERO_OVERFLOW.sh
> * lkdtm_REFCOUNT_DEC_ZERO.sh
> * lkdtm_REFCOUNT_DEC_NEGATIVE.sh
> * lkdtm_REFCOUNT_DEC_AND_TEST_NEGATIVE.sh
> * lkdtm_REFCOUNT_SUB_AND_TEST_NEGATIVE.sh
> * lkdtm_REFCOUNT_INC_ZERO.sh
> * lkdtm_REFCOUNT_ADD_ZERO.sh
> * lkdtm_REFCOUNT_INC_SATURATED.sh
> * lkdtm_REFCOUNT_DEC_SATURATED.sh
> * lkdtm_REFCOUNT_ADD_SATURATED.sh
> * lkdtm_REFCOUNT_INC_NOT_ZERO_SATURATED.sh
> * lkdtm_REFCOUNT_ADD_NOT_ZERO_SATURATED.sh
> * lkdtm_REFCOUNT_DEC_AND_TEST_SATURATED.sh
> * lkdtm_REFCOUNT_SUB_AND_TEST_SATURATED.sh
> * lkdtm_USERCOPY_HEAP_SIZE_TO.sh
> * lkdtm_USERCOPY_HEAP_SIZE_FROM.sh
> * lkdtm_USERCOPY_HEAP_WHITELIST_TO.sh
> * lkdtm_USERCOPY_HEAP_WHITELIST_FROM.sh
> * lkdtm_USERCOPY_STACK_FRAME_TO.sh
> * lkdtm_USERCOPY_STACK_FRAME_FROM.sh
> * lkdtm_USERCOPY_STACK_BEYOND.sh
> * lkdtm_USERCOPY_KERNEL.sh
> * lkdtm_STACKLEAK_ERASING.sh
> * lkdtm_CFI_FORWARD_PROTO.sh
> ### x86, kselftest
> * bpf_test_progs
> * bpf_test_dev_cgroup
> * bpf_test_tcpbpf_user
> * bpf_get_cgroup_id_user
> * bpf_test_socket_cookie
> * bpf_test_netcnt
> * bpf_test_tcpnotify_user
> * bpf_test_sock_fields
> * bpf_test_sysctl
> * bpf_test_progs-no_alu32
> * bpf_test_sock_addr.sh
> * bpf_test_tunnel.sh
> * bpf_test_lwt_seg6local.sh
> * bpf_test_flow_dissector.sh
> * bpf_test_lwt_ip_encap.sh
> * bpf_test_tc_tunnel.sh
> * bpf_test_tc_edt.sh
> * bpf_test_xdping.sh
> * bpf_test_bpftool.sh
> * clone3_clone3_cap_checkpoint_restore
> * core_close_range_test
> * firmware_fw_run_tests.sh
> * ftrace_ftracetest
> * intel_pstate_run.sh
> * kvm_vmx_preemption_timer_test
> * kvm_debug_regs
> * lkdtm_BUG.sh
> * lkdtm_WARNING.sh
> * lkdtm_WARNING_MESSAGE.sh
> * lkdtm_EXCEPTION.sh
> * lkdtm_CORRUPT_LIST_ADD.sh
> * lkdtm_CORRUPT_LIST_DEL.sh
> * lkdtm_STACK_GUARD_PAGE_LEADING.sh
> * lkdtm_STACK_GUARD_PAGE_TRAILING.sh
> * lkdtm_UNSET_SMEP.sh
> * lkdtm_CORRUPT_PAC.sh
> * lkdtm_UNALIGNED_LOAD_STORE_WRITE.sh
> * lkdtm_READ_AFTER_FREE.sh
> * lkdtm_READ_BUDDY_AFTER_FREE.sh
> * lkdtm_SLAB_FREE_DOUBLE.sh
> * lkdtm_SLAB_FREE_CROSS.sh
> * lkdtm_SLAB_FREE_PAGE.sh
> * lkdtm_EXEC_DATA.sh
> * lkdtm_EXEC_STACK.sh
> * lkdtm_EXEC_KMALLOC.sh
> * lkdtm_EXEC_VMALLOC.sh
> * lkdtm_EXEC_RODATA.sh
> * lkdtm_EXEC_USERSPACE.sh
> * lkdtm_EXEC_NULL.sh
> * lkdtm_ACCESS_USERSPACE.sh
> * lkdtm_ACCESS_NULL.sh
> * lkdtm_WRITE_RO.sh
> * lkdtm_WRITE_RO_AFTER_INIT.sh
> * lkdtm_WRITE_KERN.sh
> * lkdtm_REFCOUNT_INC_OVERFLOW.sh
> * lkdtm_REFCOUNT_ADD_OVERFLOW.sh
> * lkdtm_REFCOUNT_INC_NOT_ZERO_OVERFLOW.sh
> * lkdtm_REFCOUNT_ADD_NOT_ZERO_OVERFLOW.sh
> * lkdtm_REFCOUNT_DEC_ZERO.sh
> * lkdtm_REFCOUNT_DEC_NEGATIVE.sh
> * lkdtm_REFCOUNT_DEC_AND_TEST_NEGATIVE.sh
> * lkdtm_REFCOUNT_SUB_AND_TEST_NEGATIVE.sh
> * lkdtm_REFCOUNT_INC_ZERO.sh
> * lkdtm_REFCOUNT_ADD_ZERO.sh
> * lkdtm_REFCOUNT_INC_SATURATED.sh
> * lkdtm_REFCOUNT_DEC_SATURATED.sh
> * lkdtm_REFCOUNT_ADD_SATURATED.sh
> * lkdtm_REFCOUNT_INC_NOT_ZERO_SATURATED.sh
> * lkdtm_REFCOUNT_ADD_NOT_ZERO_SATURATED.sh
> * lkdtm_REFCOUNT_DEC_AND_TEST_SATURATED.sh
> * lkdtm_REFCOUNT_SUB_AND_TEST_SATURATED.sh
> * lkdtm_USERCOPY_HEAP_SIZE_TO.sh
> * lkdtm_USERCOPY_HEAP_SIZE_FROM.sh
> * lkdtm_USERCOPY_HEAP_WHITELIST_TO.sh
> * lkdtm_USERCOPY_HEAP_WHITELIST_FROM.sh
> * lkdtm_USERCOPY_STACK_FRAME_TO.sh
> * lkdtm_USERCOPY_STACK_FRAME_FROM.sh
> * lkdtm_USERCOPY_STACK_BEYOND.sh
> * lkdtm_USERCOPY_KERNEL.sh
> * lkdtm_STACKLEAK_ERASING.sh
> * lkdtm_CFI_FORWARD_PROTO.sh
> ### x86, kselftest-vsyscall-mode-native
> * bpf_test_progs
> * bpf_test_dev_cgroup
> * bpf_test_tcpbpf_user
> * bpf_get_cgroup_id_user
> * bpf_test_socket_cookie
> * bpf_test_netcnt
> * bpf_test_tcpnotify_user
> * bpf_test_sock_fields
> * bpf_test_sysctl
> * bpf_test_progs-no_alu32
> * bpf_test_sock_addr.sh
> * bpf_test_tunnel.sh
> * bpf_test_lwt_seg6local.sh
> * bpf_test_flow_dissector.sh
> * bpf_test_lwt_ip_encap.sh
> * bpf_test_tc_tunnel.sh
> * bpf_test_tc_edt.sh
> * bpf_test_xdping.sh
> * bpf_test_bpftool.sh
> * clone3_clone3_cap_checkpoint_restore
> * core_close_range_test
> * firmware_fw_run_tests.sh
> * ftrace_ftracetest
> * intel_pstate_run.sh
> * kvm_debug_regs
> * lkdtm_BUG.sh
> * lkdtm_WARNING.sh
> * lkdtm_WARNING_MESSAGE.sh
> * lkdtm_EXCEPTION.sh
> * lkdtm_CORRUPT_LIST_ADD.sh
> * lkdtm_CORRUPT_LIST_DEL.sh
> * lkdtm_STACK_GUARD_PAGE_LEADING.sh
> * lkdtm_STACK_GUARD_PAGE_TRAILING.sh
> * lkdtm_UNSET_SMEP.sh
> * lkdtm_CORRUPT_PAC.sh
> * lkdtm_UNALIGNED_LOAD_STORE_WRITE.sh
> * lkdtm_READ_AFTER_FREE.sh
> * lkdtm_READ_BUDDY_AFTER_FREE.sh
> * lkdtm_SLAB_FREE_DOUBLE.sh
> * lkdtm_SLAB_FREE_CROSS.sh
> * lkdtm_SLAB_FREE_PAGE.sh
> * lkdtm_EXEC_DATA.sh
> * lkdtm_EXEC_STACK.sh
> * lkdtm_EXEC_KMALLOC.sh
> * lkdtm_EXEC_VMALLOC.sh
> * lkdtm_EXEC_RODATA.sh
> * lkdtm_EXEC_USERSPACE.sh
> * lkdtm_EXEC_NULL.sh
> * lkdtm_ACCESS_USERSPACE.sh
> * lkdtm_ACCESS_NULL.sh
> * lkdtm_WRITE_RO.sh
> * lkdtm_WRITE_RO_AFTER_INIT.sh
> * lkdtm_WRITE_KERN.sh
> * lkdtm_REFCOUNT_INC_OVERFLOW.sh
> * lkdtm_REFCOUNT_ADD_OVERFLOW.sh
> * lkdtm_REFCOUNT_INC_NOT_ZERO_OVERFLOW.sh
> * lkdtm_REFCOUNT_ADD_NOT_ZERO_OVERFLOW.sh
> * lkdtm_REFCOUNT_DEC_ZERO.sh
> * lkdtm_REFCOUNT_DEC_NEGATIVE.sh
> * lkdtm_REFCOUNT_DEC_AND_TEST_NEGATIVE.sh
> * lkdtm_REFCOUNT_SUB_AND_TEST_NEGATIVE.sh
> * lkdtm_REFCOUNT_INC_ZERO.sh
> * lkdtm_REFCOUNT_ADD_ZERO.sh
> * lkdtm_REFCOUNT_INC_SATURATED.sh
> * lkdtm_REFCOUNT_DEC_SATURATED.sh
> * lkdtm_REFCOUNT_ADD_SATURATED.sh
> * lkdtm_REFCOUNT_INC_NOT_ZERO_SATURATED.sh
> * lkdtm_REFCOUNT_ADD_NOT_ZERO_SATURATED.sh
> * lkdtm_REFCOUNT_DEC_AND_TEST_SATURATED.sh
> * lkdtm_REFCOUNT_SUB_AND_TEST_SATURATED.sh
> * lkdtm_USERCOPY_HEAP_SIZE_TO.sh
> * lkdtm_USERCOPY_HEAP_SIZE_FROM.sh
> * lkdtm_USERCOPY_HEAP_WHITELIST_TO.sh
> * lkdtm_USERCOPY_HEAP_WHITELIST_FROM.sh
> * lkdtm_USERCOPY_STACK_FRAME_TO.sh
> * lkdtm_USERCOPY_STACK_FRAME_FROM.sh
> * lkdtm_USERCOPY_STACK_BEYOND.sh
> * lkdtm_USERCOPY_KERNEL.sh
> * lkdtm_STACKLEAK_ERASING.sh
> * lkdtm_CFI_FORWARD_PROTO.sh
> ### x86, kselftest-vsyscall-mode-none
> * bpf_test_progs
> * bpf_test_dev_cgroup
> * bpf_test_tcpbpf_user
> * bpf_get_cgroup_id_user
> * bpf_test_tcpnotify_user
> * bpf_test_sock_fields
> * bpf_test_sysctl
> * bpf_test_progs-no_alu32
> * bpf_test_sock_addr.sh
> * bpf_test_tunnel.sh
> * bpf_test_lwt_seg6local.sh
> * bpf_test_flow_dissector.sh
> * bpf_test_lwt_ip_encap.sh
> * bpf_test_tc_tunnel.sh
> * bpf_test_tc_edt.sh
> * bpf_test_xdping.sh
> * bpf_test_bpftool.sh
> * clone3_clone3_cap_checkpoint_restore
> * core_close_range_test
> * firmware_fw_run_tests.sh
> * ftrace_ftracetest
> * intel_pstate_run.sh
> * kvm_vmx_preemption_timer_test
> * kvm_debug_regs
> * lkdtm_BUG.sh
> * lkdtm_WARNING.sh
> * lkdtm_WARNING_MESSAGE.sh
> * lkdtm_EXCEPTION.sh
> * lkdtm_CORRUPT_LIST_ADD.sh
> * lkdtm_CORRUPT_LIST_DEL.sh
> * lkdtm_STACK_GUARD_PAGE_LEADING.sh
> * lkdtm_STACK_GUARD_PAGE_TRAILING.sh
> * lkdtm_UNSET_SMEP.sh
> * lkdtm_CORRUPT_PAC.sh
> * lkdtm_UNALIGNED_LOAD_STORE_WRITE.sh
> * lkdtm_READ_AFTER_FREE.sh
> * lkdtm_READ_BUDDY_AFTER_FREE.sh
> * lkdtm_SLAB_FREE_DOUBLE.sh
> * lkdtm_SLAB_FREE_CROSS.sh
> * lkdtm_SLAB_FREE_PAGE.sh
> * lkdtm_EXEC_DATA.sh
> * lkdtm_EXEC_STACK.sh
> * lkdtm_EXEC_KMALLOC.sh
> * lkdtm_EXEC_VMALLOC.sh
> * lkdtm_EXEC_RODATA.sh
> * lkdtm_EXEC_USERSPACE.sh
> * lkdtm_EXEC_NULL.sh
> * lkdtm_ACCESS_USERSPACE.sh
> * lkdtm_ACCESS_NULL.sh
> * lkdtm_WRITE_RO.sh
> * lkdtm_WRITE_RO_AFTER_INIT.sh
> * lkdtm_WRITE_KERN.sh
> * lkdtm_REFCOUNT_INC_OVERFLOW.sh
> * lkdtm_REFCOUNT_ADD_OVERFLOW.sh
> * lkdtm_REFCOUNT_INC_NOT_ZERO_OVERFLOW.sh
> * lkdtm_REFCOUNT_ADD_NOT_ZERO_OVERFLOW.sh
> * lkdtm_REFCOUNT_DEC_ZERO.sh
> * lkdtm_REFCOUNT_DEC_NEGATIVE.sh
> * lkdtm_REFCOUNT_DEC_AND_TEST_NEGATIVE.sh
> * lkdtm_REFCOUNT_SUB_AND_TEST_NEGATIVE.sh
> * lkdtm_REFCOUNT_INC_ZERO.sh
> * lkdtm_REFCOUNT_ADD_ZERO.sh
> * lkdtm_REFCOUNT_INC_SATURATED.sh
> * lkdtm_REFCOUNT_DEC_SATURATED.sh
> * lkdtm_REFCOUNT_ADD_SATURATED.sh
> * lkdtm_REFCOUNT_INC_NOT_ZERO_SATURATED.sh
> * lkdtm_REFCOUNT_ADD_NOT_ZERO_SATURATED.sh
> * lkdtm_REFCOUNT_DEC_AND_TEST_SATURATED.sh
> * lkdtm_REFCOUNT_SUB_AND_TEST_SATURATED.sh
> * lkdtm_USERCOPY_HEAP_SIZE_TO.sh
> * lkdtm_USERCOPY_HEAP_SIZE_FROM.sh
> * lkdtm_USERCOPY_HEAP_WHITELIST_TO.sh
> * lkdtm_USERCOPY_HEAP_WHITELIST_FROM.sh
> * lkdtm_USERCOPY_STACK_FRAME_TO.sh
> * lkdtm_USERCOPY_STACK_FRAME_FROM.sh
> * lkdtm_USERCOPY_STACK_BEYOND.sh
> * lkdtm_USERCOPY_KERNEL.sh
> * lkdtm_STACKLEAK_ERASING.sh
> * lkdtm_CFI_FORWARD_PROTO.sh
>
> ## Skips
> ### hi6220-hikey, kselftest
> * bpf_test_xdp_veth.sh
> * cgroup_test_memcontrol
> * cgroup_test_kmem
> * cgroup_test_core
> * cgroup_test_stress.sh
> * efivarfs_efivarfs.sh
> * fpu_run_test_fpu.sh
> * intel_pstate_run.sh
> * ir_ir_loopback.sh
> * livepatch_test-livepatch.sh
> * livepatch_test-callbacks.sh
> * livepatch_test-shadow-vars.sh
> * livepatch_test-state.sh
> * livepatch_test-ftrace.sh
> * lkdtm_PANIC.sh
> * lkdtm_LOOP.sh
> * lkdtm_EXHAUST_STACK.sh
> * lkdtm_CORRUPT_STACK.sh
> * lkdtm_CORRUPT_STACK_STRONG.sh
> * lkdtm_DOUBLE_FAULT.sh
> * lkdtm_OVERWRITE_ALLOCATION.sh
> * lkdtm_WRITE_AFTER_FREE.sh
> * lkdtm_WRITE_BUDDY_AFTER_FREE.sh
> * lkdtm_SOFTLOCKUP.sh
> * lkdtm_HARDLOCKUP.sh
> * lkdtm_SPINLOCKUP.sh
> * lkdtm_HUNG_TASK.sh
> * lkdtm_REFCOUNT_TIMING.sh
> * lkdtm_ATOMIC_TIMING.sh
> ### i386, kselftest
> * bpf_test_xdp_veth.sh
> * cgroup_test_memcontrol
> * cgroup_test_kmem
> * cgroup_test_core
> * cgroup_test_stress.sh
> * efivarfs_efivarfs.sh
> * fpu_run_test_fpu.sh
> * ir_ir_loopback.sh
> * kexec_test_kexec_load.sh
> * kexec_test_kexec_file_load.sh
> * livepatch_test-livepatch.sh
> * livepatch_test-callbacks.sh
> * livepatch_test-shadow-vars.sh
> * livepatch_test-state.sh
> * livepatch_test-ftrace.sh
> * lkdtm_PANIC.sh
> * lkdtm_LOOP.sh
> * lkdtm_EXHAUST_STACK.sh
> * lkdtm_CORRUPT_STACK.sh
> * lkdtm_CORRUPT_STACK_STRONG.sh
> * lkdtm_OVERWRITE_ALLOCATION.sh
> * lkdtm_WRITE_AFTER_FREE.sh
> * lkdtm_WRITE_BUDDY_AFTER_FREE.sh
> * lkdtm_SOFTLOCKUP.sh
> * lkdtm_HARDLOCKUP.sh
> * lkdtm_SPINLOCKUP.sh
> * lkdtm_HUNG_TASK.sh
> * lkdtm_REFCOUNT_TIMING.sh
> * lkdtm_ATOMIC_TIMING.sh
> ### juno-r2, kselftest
> * bpf_test_xdp_veth.sh
> * cgroup_test_memcontrol
> * cgroup_test_kmem
> * cgroup_test_core
> * cgroup_test_stress.sh
> * efivarfs_efivarfs.sh
> * fpu_run_test_fpu.sh
> * intel_pstate_run.sh
> * ir_ir_loopback.sh
> * livepatch_test-livepatch.sh
> * livepatch_test-callbacks.sh
> * livepatch_test-shadow-vars.sh
> * livepatch_test-state.sh
> * livepatch_test-ftrace.sh
> * lkdtm_PANIC.sh
> * lkdtm_LOOP.sh
> * lkdtm_EXHAUST_STACK.sh
> * lkdtm_CORRUPT_STACK.sh
> * lkdtm_CORRUPT_STACK_STRONG.sh
> * lkdtm_DOUBLE_FAULT.sh
> * lkdtm_OVERWRITE_ALLOCATION.sh
> * lkdtm_WRITE_AFTER_FREE.sh
> * lkdtm_WRITE_BUDDY_AFTER_FREE.sh
> * lkdtm_SOFTLOCKUP.sh
> * lkdtm_HARDLOCKUP.sh
> * lkdtm_SPINLOCKUP.sh
> * lkdtm_HUNG_TASK.sh
> * lkdtm_REFCOUNT_TIMING.sh
> * lkdtm_ATOMIC_TIMING.sh
> ### x86, kselftest
> * bpf_test_xdp_veth.sh
> * cgroup_test_memcontrol
> * cgroup_test_kmem
> * cgroup_test_core
> * cgroup_test_stress.sh
> * efivarfs_efivarfs.sh
> * fpu_run_test_fpu.sh
> * ir_ir_loopback.sh
> * kexec_test_kexec_load.sh
> * kexec_test_kexec_file_load.sh
> * kvm_mmio_warning_test
> * kvm_svm_vmcall_test
> * lkdtm_PANIC.sh
> * lkdtm_LOOP.sh
> * lkdtm_EXHAUST_STACK.sh
> * lkdtm_CORRUPT_STACK.sh
> * lkdtm_CORRUPT_STACK_STRONG.sh
> * lkdtm_DOUBLE_FAULT.sh
> * lkdtm_OVERWRITE_ALLOCATION.sh
> * lkdtm_WRITE_AFTER_FREE.sh
> * lkdtm_WRITE_BUDDY_AFTER_FREE.sh
> * lkdtm_SOFTLOCKUP.sh
> * lkdtm_HARDLOCKUP.sh
> * lkdtm_SPINLOCKUP.sh
> * lkdtm_HUNG_TASK.sh
> * lkdtm_REFCOUNT_TIMING.sh
> * lkdtm_ATOMIC_TIMING.sh
> ### x86, kselftest-vsyscall-mode-native
> * bpf_test_xdp_veth.sh
> * cgroup_test_memcontrol
> * cgroup_test_kmem
> * cgroup_test_core
> * cgroup_test_stress.sh
> * efivarfs_efivarfs.sh
> * fpu_run_test_fpu.sh
> * ir_ir_loopback.sh
> * kexec_test_kexec_load.sh
> * kexec_test_kexec_file_load.sh
> * kvm_mmio_warning_test
> * kvm_svm_vmcall_test
> * lkdtm_PANIC.sh
> * lkdtm_LOOP.sh
> * lkdtm_EXHAUST_STACK.sh
> * lkdtm_CORRUPT_STACK.sh
> * lkdtm_CORRUPT_STACK_STRONG.sh
> * lkdtm_DOUBLE_FAULT.sh
> * lkdtm_OVERWRITE_ALLOCATION.sh
> * lkdtm_WRITE_AFTER_FREE.sh
> * lkdtm_WRITE_BUDDY_AFTER_FREE.sh
> * lkdtm_SOFTLOCKUP.sh
> * lkdtm_HARDLOCKUP.sh
> * lkdtm_SPINLOCKUP.sh
> * lkdtm_HUNG_TASK.sh
> * lkdtm_REFCOUNT_TIMING.sh
> * lkdtm_ATOMIC_TIMING.sh
> ### x86, kselftest-vsyscall-mode-none
> * bpf_test_xdp_veth.sh
> * cgroup_test_memcontrol
> * cgroup_test_kmem
> * cgroup_test_core
> * cgroup_test_stress.sh
> * efivarfs_efivarfs.sh
> * fpu_run_test_fpu.sh
> * ir_ir_loopback.sh
> * kexec_test_kexec_load.sh
> * kexec_test_kexec_file_load.sh
> * kvm_mmio_warning_test
> * kvm_svm_vmcall_test
> * lkdtm_PANIC.sh
> * lkdtm_LOOP.sh
> * lkdtm_EXHAUST_STACK.sh
> * lkdtm_CORRUPT_STACK.sh
> * lkdtm_CORRUPT_STACK_STRONG.sh
> * lkdtm_DOUBLE_FAULT.sh
> * lkdtm_OVERWRITE_ALLOCATION.sh
> * lkdtm_WRITE_AFTER_FREE.sh
> * lkdtm_WRITE_BUDDY_AFTER_FREE.sh
> * lkdtm_SOFTLOCKUP.sh
> * lkdtm_HARDLOCKUP.sh
> * lkdtm_SPINLOCKUP.sh
> * lkdtm_HUNG_TASK.sh
> * lkdtm_REFCOUNT_TIMING.sh
> * lkdtm_ATOMIC_TIMING.sh
>
> --
> Linaro LKFT
> https://lkft.linaro.org
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [REGRESSION] kselftest: next-20200915
[not found] ` <CANKHsTfyE64ygNB0H0Nx=P63D-kqYa6aGOXS6ZmNUspLJJtS=Q@mail.gmail.com>
@ 2020-09-15 20:18 ` Shuah Khan
2020-09-17 15:52 ` Justin Cook
0 siblings, 1 reply; 5+ messages in thread
From: Shuah Khan @ 2020-09-15 20:18 UTC (permalink / raw)
To: Justin Cook, LKFT
Cc: lkft-triage, linux-kselftest, linux-next, sfr, shuah, Shuah Khan
On 9/15/20 11:52 AM, Justin Cook wrote:
> Hello,
>
> Linaro had previously been sending out a report based on our testing of
> the linux kernel using kselftest. We paused sending that report to fix a
> few issues. We are now continuing the process, starting with this report.
>
> If you have any questions, comments, feedback, or concerns please email
> lkft@linaro.org <mailto:lkft@linaro.org>.
>
> Thanks,
>
> Justin
>
Hi Justin,
Thanks for the report. It would be nice to see the reports. However, it
is hard for me to determine which tests failed and why.
> On Tue, 15 Sep 2020 at 12:44, LKFT <lkft@linaro.org
> <mailto:lkft@linaro.org>> wrote:
>
> ## Kernel
> * kernel: 5.9.0-rc5
> * git repo:
> ['https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git',
> 'https://gitlab.com/Linaro/lkft/mirrors/next/linux-next']
> * git branch: master
> * git commit: 6b02addb1d1748d21dd1261e46029b264be4e5a0
> * git describe: next-20200915
> * Test details:
> https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20200915
>
> ## Regressions (compared to build next-20200914)
>
> juno-r2:
> kselftest:
> * memfd_memfd_test
>
> x86:
> kselftest-vsyscall-mode-native:
> * kvm_vmx_preemption_timer_test
I looked for the above two failures to start with since these
are regressions and couldn't find them.
Are the regressions tied to new commits in linux-next from the
mm and kvm trees?
thanks,
-- Shuah
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [REGRESSION] kselftest: next-20200915
2020-09-15 20:18 ` Shuah Khan
@ 2020-09-17 15:52 ` Justin Cook
2020-09-17 16:10 ` Shuah Khan
0 siblings, 1 reply; 5+ messages in thread
From: Justin Cook @ 2020-09-17 15:52 UTC (permalink / raw)
To: Shuah Khan; +Cc: LKFT, lkft-triage, linux-kselftest, linux-next, sfr, shuah
Shuah,
The report sent was meant to be a general summary, rather than a deep
dive, of the results. Most of that information can be gathered by
viewing the test details.
> * Test details:
> https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20200915
If you open that link in a web browser, there are a number of ways to
dig down into the results. If you have questions about the best ways
to do this, please let me know.
Maybe that isn't the best way? I'm very open to feedback. I just tried
to best copy the previous report that was being sent out to start.
Please feel free to ask any questions you have or provide me with
feedback. I'm here to help.
Thanks,
Justin
On Tue, 15 Sep 2020 at 15:18, Shuah Khan <skhan@linuxfoundation.org> wrote:
>
> On 9/15/20 11:52 AM, Justin Cook wrote:
> > Hello,
> >
> > Linaro had previously been sending out a report based on our testing of
> > the linux kernel using kselftest. We paused sending that report to fix a
> > few issues. We are now continuing the process, starting with this report.
> >
> > If you have any questions, comments, feedback, or concerns please email
> > lkft@linaro.org <mailto:lkft@linaro.org>.
> >
> > Thanks,
> >
> > Justin
> >
>
> Hi Justin,
>
> Thanks for the report. It would be nice to see the reports. However, it
> is hard for me to determine which tests failed and why.
>
> > On Tue, 15 Sep 2020 at 12:44, LKFT <lkft@linaro.org
> > <mailto:lkft@linaro.org>> wrote:
> >
> > ## Kernel
> > * kernel: 5.9.0-rc5
> > * git repo:
> > ['https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git',
> > 'https://gitlab.com/Linaro/lkft/mirrors/next/linux-next']
> > * git branch: master
> > * git commit: 6b02addb1d1748d21dd1261e46029b264be4e5a0
> > * git describe: next-20200915
> > * Test details:
> > https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20200915
> >
> > ## Regressions (compared to build next-20200914)
> >
> > juno-r2:
> > kselftest:
> > * memfd_memfd_test
> >
> > x86:
> > kselftest-vsyscall-mode-native:
> > * kvm_vmx_preemption_timer_test
>
> I looked for the above two failures to start with since these
> are regressions and couldn't find them.
>
> Are the regressions tied to new commits in linux-next from the
> mm and kvm trees?
>
> thanks,
> -- Shuah
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [REGRESSION] kselftest: next-20200915
2020-09-17 15:52 ` Justin Cook
@ 2020-09-17 16:10 ` Shuah Khan
0 siblings, 0 replies; 5+ messages in thread
From: Shuah Khan @ 2020-09-17 16:10 UTC (permalink / raw)
To: Justin Cook
Cc: LKFT, lkft-triage, linux-kselftest, linux-next, sfr, shuah, Shuah Khan
Hi Justin,
On 9/17/20 9:52 AM, Justin Cook wrote:
> Shuah,
>
> The report sent was meant to be a general summary, rather than a deep
> dive, of the results. Most of that information can be gathered by
> viewing the test details.
>
>> * Test details:
>> https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20200915
>
> If you open that link in a web browser, there are a number of ways to
> dig down into the results. If you have questions about the best ways
> to do this, please let me know.
>
Yes. I did look at the results. It isn't easy to figure out. It would
help is cc'ing the test authors in addition to the list. There are two
failed tests if recall correctly, mm and kvm. cc'ing and subsystem
mailing lists and authors for the last commit for the test in question
will get you results quickly.
> Maybe that isn't the best way? I'm very open to feedback. I just tried
> to best copy the previous report that was being sent out to start.
>
We had the same problem with the previous report. It just tells you
which tests regressed. It is a good start. Unfortunately without
tagging test authors/maintainers it won't get addressed.
thanks,
-- Shuah
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-09-17 19:16 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-15 17:44 [REGRESSION] kselftest: next-20200915 LKFT
2020-09-15 17:54 ` Justin Cook
[not found] ` <CANKHsTfyE64ygNB0H0Nx=P63D-kqYa6aGOXS6ZmNUspLJJtS=Q@mail.gmail.com>
2020-09-15 20:18 ` Shuah Khan
2020-09-17 15:52 ` Justin Cook
2020-09-17 16:10 ` Shuah Khan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).