* There is no 'no space' message when using xfs with nfs.
@ 2018-12-09 13:07 Guk-Bong Kwon
2019-01-10 20:09 ` J. Bruce Fields
0 siblings, 1 reply; 2+ messages in thread
From: Guk-Bong Kwon @ 2018-12-09 13:07 UTC (permalink / raw)
To: linux-nfs, linux-fsdevel, linux-kernel
hi all
i use xfs filesystem over nfs
I am using the xfs file system via NFS on two Linux servers.
Even though xfs is full, you will not get a 'no space' message through nfs.
The server's load average goes up and the kworker consumes the CPU.
The server's nfs service is not responding.
When ext3 is full in the same environment, I get a 'no space' message.
Which part of nfs and xfs should be checked?
Below is the environment I am using.
kernel : nfs server 3.4.113 vanilla, nfs client 2.6.32-573.el6.x86_64
nfs : nfs v3 with tcp
==================================================================
nfs server
==================================================================
/dev/mapper/lv2 500G 500G 20K 100% /lv2
/lv2 0.0.0.0/0.0.0.0(rw,async,wdelay,nohide,nocrossmnt,insecure,no_root_squash,no_all_squash,no_subtree_check,insecure_locks,no_acl,fsid=1543743056,anonuid=65534,anongid=65534)
==================================================================
nfs client
==================================================================
10.0.0.20:/lv2 500G 500G 32K 100% /mnt/2
nfsstat -m
/mnt/2 from 10.0.0.20:/lv2
Flags: rw,relatime,vers=3,rsize=32768,wsize=32768,namlen=255,hard,proto=udp,timeo=11,retrans=3,sec=sys,mountaddr=10.0.0.20,mountvers=3,mountport=2047,mountproto=udp,local_lock=none,addr=10.0.0.20
==================================================================
server top log
==================================================================
top - 21:54:10 up 58 min, 0 users, load average: 8.50, 8.37, 8.83
Tasks: 347 total, 2 running, 345 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.0%us, 4.2%sy, 0.0%ni, 95.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
12368 root 20 0 0 0 0 S 12 0.0 4:32.44 kworker/2:2
11092 root 20 0 0 0 0 S 10 0.0 4:42.57 kworker/3:1
11166 root 20 0 0 0 0 R 9 0.0 2:09.47 kworker/5:1
12473 root 20 0 0 0 0 S 8 0.0 2:09.36 kworker/4:2
2944 root 20 0 0 0 0 D 6 0.0 2:09.10 nfsd
2953 root 20 0 0 0 0 D 6 0.0 2:24.65 nfsd
3024 root 20 0 0 0 0 D 6 0.0 2:23.12 nfsd
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: There is no 'no space' message when using xfs with nfs.
2018-12-09 13:07 There is no 'no space' message when using xfs with nfs Guk-Bong Kwon
@ 2019-01-10 20:09 ` J. Bruce Fields
0 siblings, 0 replies; 2+ messages in thread
From: J. Bruce Fields @ 2019-01-10 20:09 UTC (permalink / raw)
To: Guk-Bong Kwon; +Cc: linux-nfs, linux-fsdevel, linux-kernel
On Sun, Dec 09, 2018 at 10:07:26PM +0900, Guk-Bong Kwon wrote:
> i use xfs filesystem over nfs
>
>
> I am using the xfs file system via NFS on two Linux servers.
>
> Even though xfs is full, you will not get a 'no space' message through nfs.
>
> The server's load average goes up and the kworker consumes the CPU.
>
> The server's nfs service is not responding.
>
> When ext3 is full in the same environment, I get a 'no space' message.
>
> Which part of nfs and xfs should be checked?
I don't know. I'd be inclined to ask the xfs folks. But 3.4 is 6 years
old, and they may want you to reproduce on more recent upstream.
It might help to look at the traffic in wireshark and try to figure out
which rpc calls are not getting responses from the server.
--b.
>
>
> Below is the environment I am using.
>
>
> kernel : nfs server 3.4.113 vanilla, nfs client 2.6.32-573.el6.x86_64
>
> nfs : nfs v3 with tcp
>
>
> ==================================================================
> nfs server
> ==================================================================
> /dev/mapper/lv2 500G 500G 20K 100% /lv2
>
> /lv2 0.0.0.0/0.0.0.0(rw,async,wdelay,nohide,nocrossmnt,insecure,no_root_squash,no_all_squash,no_subtree_check,insecure_locks,no_acl,fsid=1543743056,anonuid=65534,anongid=65534)
>
>
> ==================================================================
> nfs client
> ==================================================================
> 10.0.0.20:/lv2 500G 500G 32K 100% /mnt/2
>
> nfsstat -m
> /mnt/2 from 10.0.0.20:/lv2
> Flags: rw,relatime,vers=3,rsize=32768,wsize=32768,namlen=255,hard,proto=udp,timeo=11,retrans=3,sec=sys,mountaddr=10.0.0.20,mountvers=3,mountport=2047,mountproto=udp,local_lock=none,addr=10.0.0.20
>
>
> ==================================================================
> server top log
> ==================================================================
> top - 21:54:10 up 58 min, 0 users, load average: 8.50, 8.37, 8.83
> Tasks: 347 total, 2 running, 345 sleeping, 0 stopped, 0 zombie
> Cpu(s): 0.0%us, 4.2%sy, 0.0%ni, 95.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
>
> PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
> 12368 root 20 0 0 0 0 S 12 0.0 4:32.44 kworker/2:2
> 11092 root 20 0 0 0 0 S 10 0.0 4:42.57 kworker/3:1
> 11166 root 20 0 0 0 0 R 9 0.0 2:09.47 kworker/5:1
> 12473 root 20 0 0 0 0 S 8 0.0 2:09.36 kworker/4:2
> 2944 root 20 0 0 0 0 D 6 0.0 2:09.10 nfsd
> 2953 root 20 0 0 0 0 D 6 0.0 2:24.65 nfsd
> 3024 root 20 0 0 0 0 D 6 0.0 2:23.12 nfsd
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-01-10 20:09 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-09 13:07 There is no 'no space' message when using xfs with nfs Guk-Bong Kwon
2019-01-10 20:09 ` J. Bruce Fields
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).