Linux-NVDIMM Archive on lore.kernel.org
 help / color / Atom feed
From: Vivek Goyal <vgoyal@redhat.com>
To: linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-nvdimm@lists.01.org
Cc: virtio-fs@redhat.com, dgilbert@redhat.com, stefanha@redhat.com,
	miklos@szeredi.hu
Subject: [PATCH 13/19] fuse: Define dax address space operations
Date: Wed, 21 Aug 2019 13:57:14 -0400
Message-ID: <20190821175720.25901-14-vgoyal@redhat.com> (raw)
In-Reply-To: <20190821175720.25901-1-vgoyal@redhat.com>

This is done along the lines of ext4 and xfs. I primarily wanted ->writepages
hook at this time so that I could call into dax_writeback_mapping_range().
This in turn will decide which pfns need to be written back.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
---
 fs/fuse/file.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 32870bb862e7..b8bcf49f007f 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -2556,6 +2556,17 @@ static int fuse_writepages_fill(struct page *page,
 	return err;
 }
 
+static int fuse_dax_writepages(struct address_space *mapping,
+				struct writeback_control *wbc)
+{
+
+	struct inode *inode = mapping->host;
+	struct fuse_conn *fc = get_fuse_conn(inode);
+
+	return dax_writeback_mapping_range(mapping,
+		NULL, fc->dax_dev, wbc);
+}
+
 static int fuse_writepages(struct address_space *mapping,
 			   struct writeback_control *wbc)
 {
@@ -3910,6 +3921,13 @@ static const struct address_space_operations fuse_file_aops  = {
 	.write_end	= fuse_write_end,
 };
 
+static const struct address_space_operations fuse_dax_file_aops  = {
+	.writepages	= fuse_dax_writepages,
+	.direct_IO	= noop_direct_IO,
+	.set_page_dirty	= noop_set_page_dirty,
+	.invalidatepage	= noop_invalidatepage,
+};
+
 void fuse_init_file_inode(struct inode *inode)
 {
 	struct fuse_inode *fi = get_fuse_inode(inode);
@@ -3927,5 +3945,6 @@ void fuse_init_file_inode(struct inode *inode)
 
 	if (fc->dax_dev) {
 		inode->i_flags |= S_DAX;
+		inode->i_data.a_ops = &fuse_dax_file_aops;
 	}
 }
-- 
2.20.1

_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

  parent reply index

Thread overview: 77+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-21 17:57 [PATCH v3 00/19][RFC] virtio-fs: Enable DAX support Vivek Goyal
2019-08-21 17:57 ` [PATCH 01/19] dax: remove block device dependencies Vivek Goyal
2019-08-26 11:51   ` Christoph Hellwig
2019-08-27 16:38     ` Vivek Goyal
2019-08-28  6:58       ` Christoph Hellwig
2019-08-28 17:58         ` Vivek Goyal
2019-08-28 22:53           ` Dave Chinner
2019-08-29  0:04             ` Dan Williams
2019-08-29  9:32               ` Christoph Hellwig
2019-12-16 18:10               ` Vivek Goyal
2020-01-07 12:51                 ` Christoph Hellwig
2020-01-07 14:22                   ` Dan Williams
2020-01-07 17:07                     ` Darrick J. Wong
2020-01-07 17:29                       ` Dan Williams
2020-01-07 18:01                         ` Vivek Goyal
2020-01-07 18:07                           ` Dan Williams
2020-01-07 18:33                             ` Vivek Goyal
2020-01-07 18:49                               ` Dan Williams
2020-01-07 19:02                                 ` Darrick J. Wong
2020-01-07 19:46                                   ` Dan Williams
2020-01-07 23:38                                     ` Dan Williams
2020-01-09 11:24                                 ` Jan Kara
2020-01-09 20:03                                   ` Dan Williams
2020-01-10 12:36                                     ` Christoph Hellwig
2020-01-14 20:31                                     ` Vivek Goyal
2020-01-14 20:39                                       ` Dan Williams
2020-01-14 21:28                                         ` Vivek Goyal
2020-01-14 22:23                                           ` Dan Williams
2020-01-15 19:56                                             ` Vivek Goyal
2020-01-15 20:17                                               ` Dan Williams
2020-01-15 21:08                                                 ` Jeff Moyer
2020-01-16 18:09                                                   ` Dan Williams
2020-01-16 18:39                                                     ` Vivek Goyal
2020-01-16 19:09                                                       ` Dan Williams
2020-01-16 19:23                                                         ` Vivek Goyal
2020-02-11 17:33                                                     ` Vivek Goyal
2020-01-15  9:03                                           ` Jan Kara
2019-08-21 17:57 ` [PATCH 02/19] dax: Pass dax_dev to dax_writeback_mapping_range() Vivek Goyal
2019-08-26 11:53   ` Christoph Hellwig
2019-08-26 20:33     ` Vivek Goyal
2019-08-26 20:58       ` Vivek Goyal
2019-08-26 21:33         ` Dan Williams
2019-08-28  6:58         ` Christoph Hellwig
2020-01-03 14:12         ` Vivek Goyal
2020-01-03 18:12           ` Dan Williams
2020-01-03 18:18             ` Dan Williams
2020-01-03 18:33               ` Vivek Goyal
2020-01-03 19:30                 ` Dan Williams
2020-01-03 18:43               ` Vivek Goyal
2019-08-27 13:45       ` Jan Kara
2019-08-21 17:57 ` [PATCH 03/19] virtio: Add get_shm_region method Vivek Goyal
2019-08-21 17:57 ` [PATCH 04/19] virtio: Implement get_shm_region for PCI transport Vivek Goyal
2019-08-26  1:43   ` [Virtio-fs] " piaojun
2019-08-26 13:06     ` Vivek Goyal
2019-08-27  9:41       ` piaojun
2019-08-27  8:34   ` Cornelia Huck
2019-08-27  8:46     ` Cornelia Huck
2019-08-27 11:53     ` Vivek Goyal
2019-08-21 17:57 ` [PATCH 05/19] virtio: Implement get_shm_region for MMIO transport Vivek Goyal
2019-08-27  8:39   ` Cornelia Huck
2019-08-27 11:54     ` Vivek Goyal
2019-08-21 17:57 ` [PATCH 06/19] fuse, dax: add fuse_conn->dax_dev field Vivek Goyal
2019-08-21 17:57 ` [PATCH 07/19] virtio_fs, dax: Set up virtio_fs dax_device Vivek Goyal
2019-08-21 17:57 ` [PATCH 08/19] fuse: Keep a list of free dax memory ranges Vivek Goyal
2019-08-21 17:57 ` [PATCH 09/19] fuse: implement FUSE_INIT map_alignment field Vivek Goyal
2019-08-21 17:57 ` [PATCH 10/19] fuse: Introduce setupmapping/removemapping commands Vivek Goyal
2019-08-21 17:57 ` [PATCH 11/19] fuse, dax: Implement dax read/write operations Vivek Goyal
2019-08-21 19:49   ` Liu Bo
2019-08-22 12:59     ` Vivek Goyal
2019-08-21 17:57 ` [PATCH 12/19] fuse, dax: add DAX mmap support Vivek Goyal
2019-08-21 17:57 ` Vivek Goyal [this message]
2019-08-21 17:57 ` [PATCH 14/19] fuse, dax: Take ->i_mmap_sem lock during dax page fault Vivek Goyal
2019-08-21 17:57 ` [PATCH 15/19] fuse: Maintain a list of busy elements Vivek Goyal
2019-08-21 17:57 ` [PATCH 16/19] dax: Create a range version of dax_layout_busy_page() Vivek Goyal
2019-08-21 17:57 ` [PATCH 17/19] fuse: Add logic to free up a memory range Vivek Goyal
2019-08-21 17:57 ` [PATCH 18/19] fuse: Release file in process context Vivek Goyal
2019-08-21 17:57 ` [PATCH 19/19] fuse: Take inode lock for dax inode truncation Vivek Goyal

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190821175720.25901-14-vgoyal@redhat.com \
    --to=vgoyal@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvdimm@lists.01.org \
    --cc=miklos@szeredi.hu \
    --cc=stefanha@redhat.com \
    --cc=virtio-fs@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-NVDIMM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-nvdimm/0 linux-nvdimm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-nvdimm linux-nvdimm/ https://lore.kernel.org/linux-nvdimm \
		linux-nvdimm@lists.01.org
	public-inbox-index linux-nvdimm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.01.lists.linux-nvdimm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git