* [ndctl PATCH 2/2] ndctl/test: add checking the presence of jq command ahead
2021-03-01 17:25 [ndctl PATCH 1/2] configure: add checking jq command QI Fuli
@ 2021-03-01 17:25 ` QI Fuli
2021-03-02 5:20 ` Santosh Sivaraj
2021-03-02 5:15 ` [ndctl PATCH 1/2] configure: add checking jq command Santosh Sivaraj
2021-03-10 9:10 ` Verma, Vishal L
2 siblings, 1 reply; 5+ messages in thread
From: QI Fuli @ 2021-03-01 17:25 UTC (permalink / raw)
To: linux-nvdimm; +Cc: QI Fuli
Due to the lack of jq command, the result of the test will be 'fail'.
This patch adds checking the presence of jq commmand ahead.
If there is no jq command in the system, the test will be marked as 'skip'.
Signed-off-by: QI Fuli <qi.fuli@fujitsu.com>
Link: https://github.com/pmem/ndctl/issues/141
---
test/daxdev-errors.sh | 1 +
test/inject-error.sh | 2 ++
test/inject-smart.sh | 1 +
test/label-compat.sh | 1 +
test/max_available_extent_ns.sh | 1 +
test/monitor.sh | 2 ++
test/multi-dax.sh | 1 +
test/sector-mode.sh | 2 ++
8 files changed, 11 insertions(+)
diff --git a/test/daxdev-errors.sh b/test/daxdev-errors.sh
index 6281f32..9547d78 100755
--- a/test/daxdev-errors.sh
+++ b/test/daxdev-errors.sh
@@ -9,6 +9,7 @@ rc=77
. $(dirname $0)/common
check_min_kver "4.12" || do_skip "lacks dax dev error handling"
+check_prereq "jq"
trap 'err $LINENO' ERR
diff --git a/test/inject-error.sh b/test/inject-error.sh
index c636033..7d0b826 100755
--- a/test/inject-error.sh
+++ b/test/inject-error.sh
@@ -11,6 +11,8 @@ err_count=8
. $(dirname $0)/common
+check_prereq "jq"
+
trap 'err $LINENO' ERR
# sample json:
diff --git a/test/inject-smart.sh b/test/inject-smart.sh
index 94705df..4ca83b8 100755
--- a/test/inject-smart.sh
+++ b/test/inject-smart.sh
@@ -166,6 +166,7 @@ do_tests()
}
check_min_kver "4.19" || do_skip "kernel $KVER may not support smart (un)injection"
+check_prereq "jq"
modprobe nfit_test
rc=1
diff --git a/test/label-compat.sh b/test/label-compat.sh
index 340b93d..8ab2858 100755
--- a/test/label-compat.sh
+++ b/test/label-compat.sh
@@ -10,6 +10,7 @@ BASE=$(dirname $0)
. $BASE/common
check_min_kver "4.11" || do_skip "may not provide reliable isetcookie values"
+check_prereq "jq"
trap 'err $LINENO' ERR
diff --git a/test/max_available_extent_ns.sh b/test/max_available_extent_ns.sh
index 14d741d..343f3c9 100755
--- a/test/max_available_extent_ns.sh
+++ b/test/max_available_extent_ns.sh
@@ -9,6 +9,7 @@ rc=77
trap 'err $LINENO' ERR
check_min_kver "4.19" || do_skip "kernel $KVER may not support max_available_size"
+check_prereq "jq"
init()
{
diff --git a/test/monitor.sh b/test/monitor.sh
index cdab5e1..28c5541 100755
--- a/test/monitor.sh
+++ b/test/monitor.sh
@@ -13,6 +13,8 @@ smart_supported_bus=""
. $(dirname $0)/common
+check_prereq "jq"
+
trap 'err $LINENO' ERR
check_min_kver "4.15" || do_skip "kernel $KVER may not support monitor service"
diff --git a/test/multi-dax.sh b/test/multi-dax.sh
index e932569..8496619 100755
--- a/test/multi-dax.sh
+++ b/test/multi-dax.sh
@@ -9,6 +9,7 @@ rc=77
. $(dirname $0)/common
check_min_kver "4.13" || do_skip "may lack multi-dax support"
+check_prereq "jq"
trap 'err $LINENO' ERR
diff --git a/test/sector-mode.sh b/test/sector-mode.sh
index dd7013e..54fa806 100755
--- a/test/sector-mode.sh
+++ b/test/sector-mode.sh
@@ -6,6 +6,8 @@ rc=77
. $(dirname $0)/common
+check_prereq "jq"
+
set -e
trap 'err $LINENO' ERR
--
2.29.2
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [ndctl PATCH 2/2] ndctl/test: add checking the presence of jq command ahead
2021-03-01 17:25 ` [ndctl PATCH 2/2] ndctl/test: add checking the presence of jq command ahead QI Fuli
@ 2021-03-02 5:20 ` Santosh Sivaraj
0 siblings, 0 replies; 5+ messages in thread
From: Santosh Sivaraj @ 2021-03-02 5:20 UTC (permalink / raw)
To: QI Fuli, linux-nvdimm; +Cc: QI Fuli
QI Fuli <fukuri.sai@gmail.com> writes:
> Due to the lack of jq command, the result of the test will be 'fail'.
> This patch adds checking the presence of jq commmand ahead.
> If there is no jq command in the system, the test will be marked as 'skip'.
>
> Signed-off-by: QI Fuli <qi.fuli@fujitsu.com>
> Link: https://github.com/pmem/ndctl/issues/141
Though it looks slightly redundant after having the check in configure.ac, not
against having additional checks.
Reviewed-by: Santosh Sivaraj <santosh@fossix.org>
Thanks,
Santosh
> ---
> test/daxdev-errors.sh | 1 +
> test/inject-error.sh | 2 ++
> test/inject-smart.sh | 1 +
> test/label-compat.sh | 1 +
> test/max_available_extent_ns.sh | 1 +
> test/monitor.sh | 2 ++
> test/multi-dax.sh | 1 +
> test/sector-mode.sh | 2 ++
> 8 files changed, 11 insertions(+)
>
> diff --git a/test/daxdev-errors.sh b/test/daxdev-errors.sh
> index 6281f32..9547d78 100755
> --- a/test/daxdev-errors.sh
> +++ b/test/daxdev-errors.sh
> @@ -9,6 +9,7 @@ rc=77
> . $(dirname $0)/common
>
> check_min_kver "4.12" || do_skip "lacks dax dev error handling"
> +check_prereq "jq"
>
> trap 'err $LINENO' ERR
>
> diff --git a/test/inject-error.sh b/test/inject-error.sh
> index c636033..7d0b826 100755
> --- a/test/inject-error.sh
> +++ b/test/inject-error.sh
> @@ -11,6 +11,8 @@ err_count=8
>
> . $(dirname $0)/common
>
> +check_prereq "jq"
> +
> trap 'err $LINENO' ERR
>
> # sample json:
> diff --git a/test/inject-smart.sh b/test/inject-smart.sh
> index 94705df..4ca83b8 100755
> --- a/test/inject-smart.sh
> +++ b/test/inject-smart.sh
> @@ -166,6 +166,7 @@ do_tests()
> }
>
> check_min_kver "4.19" || do_skip "kernel $KVER may not support smart (un)injection"
> +check_prereq "jq"
> modprobe nfit_test
> rc=1
>
> diff --git a/test/label-compat.sh b/test/label-compat.sh
> index 340b93d..8ab2858 100755
> --- a/test/label-compat.sh
> +++ b/test/label-compat.sh
> @@ -10,6 +10,7 @@ BASE=$(dirname $0)
> . $BASE/common
>
> check_min_kver "4.11" || do_skip "may not provide reliable isetcookie values"
> +check_prereq "jq"
>
> trap 'err $LINENO' ERR
>
> diff --git a/test/max_available_extent_ns.sh b/test/max_available_extent_ns.sh
> index 14d741d..343f3c9 100755
> --- a/test/max_available_extent_ns.sh
> +++ b/test/max_available_extent_ns.sh
> @@ -9,6 +9,7 @@ rc=77
> trap 'err $LINENO' ERR
>
> check_min_kver "4.19" || do_skip "kernel $KVER may not support max_available_size"
> +check_prereq "jq"
>
> init()
> {
> diff --git a/test/monitor.sh b/test/monitor.sh
> index cdab5e1..28c5541 100755
> --- a/test/monitor.sh
> +++ b/test/monitor.sh
> @@ -13,6 +13,8 @@ smart_supported_bus=""
>
> . $(dirname $0)/common
>
> +check_prereq "jq"
> +
> trap 'err $LINENO' ERR
>
> check_min_kver "4.15" || do_skip "kernel $KVER may not support monitor service"
> diff --git a/test/multi-dax.sh b/test/multi-dax.sh
> index e932569..8496619 100755
> --- a/test/multi-dax.sh
> +++ b/test/multi-dax.sh
> @@ -9,6 +9,7 @@ rc=77
> . $(dirname $0)/common
>
> check_min_kver "4.13" || do_skip "may lack multi-dax support"
> +check_prereq "jq"
>
> trap 'err $LINENO' ERR
>
> diff --git a/test/sector-mode.sh b/test/sector-mode.sh
> index dd7013e..54fa806 100755
> --- a/test/sector-mode.sh
> +++ b/test/sector-mode.sh
> @@ -6,6 +6,8 @@ rc=77
>
> . $(dirname $0)/common
>
> +check_prereq "jq"
> +
> set -e
> trap 'err $LINENO' ERR
>
> --
> 2.29.2
> _______________________________________________
> Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
> To unsubscribe send an email to linux-nvdimm-leave@lists.01.org
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [ndctl PATCH 1/2] configure: add checking jq command
2021-03-01 17:25 [ndctl PATCH 1/2] configure: add checking jq command QI Fuli
2021-03-01 17:25 ` [ndctl PATCH 2/2] ndctl/test: add checking the presence of jq command ahead QI Fuli
@ 2021-03-02 5:15 ` Santosh Sivaraj
2021-03-10 9:10 ` Verma, Vishal L
2 siblings, 0 replies; 5+ messages in thread
From: Santosh Sivaraj @ 2021-03-02 5:15 UTC (permalink / raw)
To: QI Fuli, linux-nvdimm; +Cc: QI Fuli
Hi Qi,
QI Fuli <fukuri.sai@gmail.com> writes:
> Add checking jq command since it is needed to validate tests
>
> Cc: Santosh Sivaraj <santosh@fossix.org>
> Signed-off-by: QI Fuli <qi.fuli@fujitsu.com>
> Link: https://github.com/pmem/ndctl/issues/141
> ---
> configure.ac | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/configure.ac b/configure.ac
> index 5ec8d2f..839836b 100644
> --- a/configure.ac
> +++ b/configure.ac
> @@ -65,6 +65,12 @@ fi
> AC_SUBST([XMLTO])
> fi
>
> +AC_CHECK_PROG(JQ, [jq], [$(which jq)], [missing])
> +if test "x$JQ" = xmissing; then
> + AC_MSG_ERROR([jq command needed to validate tests])
> +fi
> +AC_SUBST([JQ])
> +
> AC_C_TYPEOF
> AC_DEFINE([HAVE_STATEMENT_EXPR], 1, [Define to 1 if you have statement expressions.])
>
> --
> 2.29.2
Acked-by: Santosh Sivaraj <santosh@fossix.org>
Thanks,
Santosh
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [ndctl PATCH 1/2] configure: add checking jq command
2021-03-01 17:25 [ndctl PATCH 1/2] configure: add checking jq command QI Fuli
2021-03-01 17:25 ` [ndctl PATCH 2/2] ndctl/test: add checking the presence of jq command ahead QI Fuli
2021-03-02 5:15 ` [ndctl PATCH 1/2] configure: add checking jq command Santosh Sivaraj
@ 2021-03-10 9:10 ` Verma, Vishal L
2 siblings, 0 replies; 5+ messages in thread
From: Verma, Vishal L @ 2021-03-10 9:10 UTC (permalink / raw)
To: fukuri.sai, linux-nvdimm; +Cc: qi.fuli
On Tue, 2021-03-02 at 02:25 +0900, QI Fuli wrote:
> Add checking jq command since it is needed to validate tests
>
> Cc: Santosh Sivaraj <santosh@fossix.org>
> Signed-off-by: QI Fuli <qi.fuli@fujitsu.com>
> Link: https://github.com/pmem/ndctl/issues/141
> ---
> configure.ac | 6 ++++++
> 1 file changed, 6 insertions(+)
Hm, I think I prefer how you did it in v1. i.e. no configure.ac check.
In my view, configure.ac tests are for the core things needed to /run/
ndctl on a system. Development unit tests can just continue to use
check_prereq as you did. So I'll pick up v1 of this for now - if you
want me to do something else please let me know!
>
> diff --git a/configure.ac b/configure.ac
> index 5ec8d2f..839836b 100644
> --- a/configure.ac
> +++ b/configure.ac
> @@ -65,6 +65,12 @@ fi
> AC_SUBST([XMLTO])
> fi
>
> +AC_CHECK_PROG(JQ, [jq], [$(which jq)], [missing])
> +if test "x$JQ" = xmissing; then
> + AC_MSG_ERROR([jq command needed to validate tests])
> +fi
> +AC_SUBST([JQ])
> +
> AC_C_TYPEOF
> AC_DEFINE([HAVE_STATEMENT_EXPR], 1, [Define to 1 if you have statement expressions.])
>
> --
> 2.29.2
> _______________________________________________
> Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
> To unsubscribe send an email to linux-nvdimm-leave@lists.01.org
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org
^ permalink raw reply [flat|nested] 5+ messages in thread