[PATCH v7 00/28] Zone write plugging

[PATCH v7 00/28] Zone write plugging

[Damien Le Moal]

The patch series introduces zone write plugging (ZWP) as the new
mechanism to control the ordering of writes to zoned block devices.
ZWP replaces zone write locking (ZWL) which is implemented only by
mq-deadline today. ZWP also allows emulating zone append operations
using regular writes for zoned devices that do not natively support this
operation (e.g. SMR HDDs). This patch series removes the scsi disk
driver and device mapper zone append emulation to use ZWP emulation.

Unlike ZWL which operates on requests, ZWP operates on BIOs. A zone
write plug is simply a BIO list that is atomically manipulated using a
spinlock and a kblockd submission work. A write BIO to a zone is
"plugged" to delay its execution if a write BIO for the same zone was
already issued, that is, if a write request for the same zone is being
executed. The next plugged BIO is unplugged and issued once the write
request completes.

This mechanism allows to:
 - Untangle zone write ordering from the block IO schedulers. This
   allows removing the restriction on using only mq-deadline for zoned
   block devices. Any block IO scheduler, including "none" can be used.
 - Zone write plugging operates on BIOs instead of requests. Plugged
   BIOs waiting for execution thus do not hold scheduling tags and thus
   do not prevent other BIOs from being submitted to the device (reads
   or writes to other zones). Depending on the workload, this can
   significantly improve the device use and the performance.
 - Both blk-mq (request) based zoned devices and BIO-based devices (e.g.
   device mapper) can use ZWP. It is mandatory for the
   former but optional for the latter: BIO-based driver can use zone
   write plugging to implement write ordering guarantees, or the drivers
   can implement their own if needed.
 - The code is less invasive in the block layer and in device drivers.
   ZWP implementation is mostly limited to blk-zoned.c, with some small
   changes in blk-mq.c, blk-merge.c and bio.c.

Performance evaluation results are shown below.

The series is based on block/for-next and organized as follows:

 - Patch 1 to 6 are preparatory changes for patch 7.
 - Patch 7 and 8 introduce ZWP
 - Patch 9 and 10 add zone append emulation to ZWP.
 - Patch 11 to 18 modify zoned block device drivers to use ZWP and
   prepare for the removal of ZWL.
 - Patch 19 to 28 remove zone write locking

Overall, these changes do not significantly increase the amount of code
(the higher number of addition shown by diff-stat is in fact due to a
larger amount of comments in the code).

Many thanks must go to Christoph Hellwig for comments and suggestions
he provided on earlier versions of these patches.

Performance evaluation results
==============================

Environments:
 - Intel Xeon 16-cores/32-threads, 128GB of RAM
 - Kernel:
   - ZWL (baseline): block/for-next (based on 6.9.0-rc2)
   - ZWP: block/for-next patched kernel to add zone write plugging
     (both kernels were compiled with the same configuration turning
     off most heavy debug features)

Workoads:
 - seqw4K1: 4KB sequential write, qd=1
 - seqw4K16: 4KB sequential write, qd=16
 - seqw1M16: 1MB sequential write, qd=16
 - rndw4K16: 4KB random write, qd=16
 - rndw128K16: 128KB random write, qd=16
 - btrfs workoad: Single fio job writing 128 MB files using 128 KB
   direct IOs at qd=16.

Devices:
 - nullblk (zoned): 4096 zones of 256 MB, 128 max open zones.
 - NVMe ZNS drive: 1 TB ZNS drive with 2GB zone size, 14 max open and
   active zones.
 - SMR HDD: 20 TB disk with 256MB zone size, 128 max open zones.

For ZWP, the result show the performance percentage increase (or
decrease) against ZWL (baseline) case.

1) null_blk zoned device:

             +--------+--------+-------+--------+---------+---------+
             |seqw4K1 |seqw4K16|seqw1M1|seqw1M16|rndw4K16|rndw128K16|
             |(MB/s)  | (MB/s) |(MB/s) | (MB/s) | (KIOPS)| (KIOPS)  |
 +-----------+--------+--------+-------+--------+--------+----------+
 |    ZWL    | 940    | 840    | 18550 | 14400  | 424    | 167      |
 |mq-deadline|        |        |       |        |        |          |
 +-----------+--------+--------+-------+--------+--------+----------+
 |    ZWP    | 943    | 845    | 18660 | 14770  | 461    | 165      |
 |mq-deadline| (+0%)  | (+0%)  | (+0%) | (+1%)  | (+8%)  | (-1%)    |
 +-----------+--------+--------+-------+--------+--------+----------+
 |    ZWP    | 756    | 668    | 16020 | 12980  | 135    | 101      |
 |    bfq    | (-19%) | (-20%) | (-13%)| (-9%)  | (-68%) | (-39%)   |
 +-----------+--------+--------+-------+--------+--------+----------+
 |    ZWP    | 2639   | 1715   | 28190 | 19760  | 344    | 150      |
 |   none    | (+180%)| (+104%)| (+51%)| (+37%) | (-18%) | (-10%)   |
 +-----------+--------+--------+-------+--------+--------+----------+

ZWP with mq-deadline gives performance very similar to zone write
locking, showing that zone write plugging overhead is acceptable.
But ZWP ability to run fast block devices with the none scheduler
shows brings all the benefits of zone write plugging and results in
significant performance increase for all workloads. The exception to
this are random write workloads with multiple jobs: for these, the
faster request submission rate achieved by zone write plugging results
in higher contention on null-blk zone spinlock, which degrades
performance.

2) NVMe ZNS drive:

             +--------+--------+-------+--------+--------+----------+
             |seqw4K1 |seqw4K16|seqw1M1|seqw1M16|rndw4K16|rndw128K16|
             |(MB/s)  | (MB/s) |(MB/s) | (MB/s) | (KIOPS)|  (KIOPS) |
 +-----------+--------+--------+-------+--------+--------+----------+
 |    ZWL    | 183    | 702    | 1066  | 1103   | 53.5   | 14.5     |
 |mq-deadline|        |        |       |        |        |          |
 +-----------+--------+--------+-------+--------+--------+----------+
 |    ZWP    | 183    | 719    | 1086  | 1108   | 55.6   | 14.7     |
 |mq-deadline| (-0%)  | (+1%)  | (+0%) | (+0%)  | (+3%)  | (+1%)    |
 +-----------+--------+--------+-------+--------+--------+----------+
 |    ZWP    | 178    | 691    | 1082  | 1106   | 30.8   | 11.5     |
 |    bfq    | (-3%)  | (-2%)  | (-0%) | (+0%)  | (-42%) | (-20%)   |
 +-----------+--------+--------+-------+--------+--------+----------+
 |    ZWP    | 190    | 666    | 1083  | 1108   | 51.4   | 14.7     |
 |   none    | (+4%)  | (-5%)  | (+0%) | (+0%)  | (-4%)  | (+0%)    |
 +-----------+--------+--------+-------+--------+--------+----------+

Zone write plugging overhead does not significantly impact performance.
Similar to nullblk, using the none scheduler leads to performance
increase for most workloads.

3) SMR SATA HDD:

             +-------+--------+-------+--------+--------+----------+
             |seqw4K1|seqw4K16|seqw1M1|seqw1M16|rndw4K16|rndw128K16|
             |(MB/s) | (MB/s) |(MB/s) | (MB/s) | (KIOPS)|  (KIOPS) |
 +-----------+-------+--------+-------+--------+--------+----------+
 |    ZWL    | 107   | 243    | 245   | 246    | 2.2    | 0.763    |
 |mq-deadline|       |        |       |        |        |          |
 +-----------+-------+--------+-------+--------+--------+----------+
 |    ZWP    | 107   | 242    | 245   | 245    | 2.2    | 0.772    |
 |mq-deadline| (+0%) | (-0%)  | (+0%) | (-0%)  | (+0%)  | (+0%)    |
 +-----------+-------+--------+-------+--------+--------+----------+
 |    ZWP    | 104   | 241    | 246   | 242    | 2.2    | 0.765    |
 |    bfq    | (-2%) | (-0%)  | (+0%) | (-0%)  | (+0%)  | (+0%)    |
 +-----------+-------+--------+-------+--------+--------+----------+
 |    ZWP    | 115   | 235    | 249   | 242    | 2.2    | 0.763    |
 |   none    | (+7%) | (-3%)  | (+1%) | (-1%)  | (+0%)  | (+0%)    |
 +-----------+-------+--------+-------+--------+--------+----------+

Performance with purely sequential write workloads at high queue depth
somewhat decrease a little when using zone write plugging. This is due
to the different IO pattern that ZWP generates where the first writes to
a zone start being issued when the end of the previous zone are still
being written. Depending on how the disk handles queued commands, seek
may be generated, slightly impacting the throughput achieved. Such pure
sequential write workloads are however rare with SMR drives.

4) Zone append tests using btrfs:

             +-------------+-------------+-----------+-------------+
             |  null-blk   |  null_blk   |    ZNS    |     SMR     |
             |  native ZA  | emulated ZA | native ZA | emulated ZA |
             |    (MB/s)   |   (MB/s)    |   (MB/s)  |    (MB/s)   |
 +-----------+-------------+-------------+-----------+-------------+
 |    ZWL    | 2441        | N/A         | 1081      | 243         |
 |mq-deadline|             |             |           |             |
 +-----------+-------------+-------------+-----------+-------------+
 |    ZWP    | 2361        | 2999        | 1085      | 239         |
 |mq-deadline| (-1%)       |             | (+0%)     | (-2%)       |
 +-----------+-------------+-------------+-----------+-------------+
 |    ZWP    | 2299        | 2730        | 1080      | 240         |
 |    bfq    | (-4%)       |             | (+0%)     | (-2%)       |
 +-----------+-------------+-------------+-----------+-------------+
 |    ZWP    | 2443        | 3152        | 1083      | 240         |
 |    none   | (+0%)       |             | (+0%)     | (-1%)       |
 +-----------+-------------+-------------+-----------+-------------+

With a more realistic use of the device though a file system, ZWP does
not introduce significant performance differences, except for SMR for
the same reason as with the fio sequential workloads at high queue
depth.

Changes from v6:
 - Addressed typo in comment in patch 12 spotted by Mike.
 - Added review and tested tags.

Changes from v5:
 - Addressed Bart's comment in patch 7 (renaming, typos in comments)
 - Simplified zone_append_max_sectors initialization as suggested by
   Bart in patch 16.
 - Added review and tested tags.

Changes from v4:
 - Modified patch 7 to:
   - Fix a compilation warning
   - Integrate disk_lookup_zone_wplug() into disk_get_zone_wplug() so
     that all users of a zone write plug do a get+put when referencing
     the plug.
   - Introduced inline functions blk_zone_write_complete_request() and
     blk_zone_write_bio_endio() to integrate the "if (plugging)" test
     and avoid repeating it for all calls.
 - Added review tags

Changes from v3:
 - Rebase on block/for-next
 - Removed old patch 1 as it is already applied
 - Addressed Bart and Christoph comment in patch 4
 - Merged former patch 8 and 9 together and changed the zone write plug
   allocation to use a mempool
 - Removed the zone_wplugs_mempool_size filed from patch 8 and instead
   directly reference mempool->min_nr
 - Added review tags

Changes from v2:
 - Added Patch 1 (Christoph's comment)
 - Fixed error code setup in Patch 3 (Bart's comment)
 - Split former patch 26 into patches 27 and 28
 - Modified patch 8 (zone write plugging) introduction to remove the
   kmem_cache use and address Bart's and Christoph comments.
 - Changed from using a mempool of zone write plugs to using a simple
   free-list (patch 9)
 - Simplified patch 10 as suggested by Christoph
 - Moved common code to a helper in patch 13 as suggested by Christoph

Changes from v1:
 - Added patch 6
 - Rewrite of patch 7 to use a hash table of dynamically allocated zone
   write plugs. This results in changes in patch 11 and the addition of
   patch 8 and 9.
 - Rebased everything on 6.9.0-rc1
 - Added review tags for patches that did not change

Damien Le Moal (28):
  block: Restore sector of flush requests
  block: Remove req_bio_endio()
  block: Introduce blk_zone_update_request_bio()
  block: Introduce bio_straddles_zones() and bio_offset_from_zone_start()
  block: Allow using bio_attempt_back_merge() internally
  block: Remember zone capacity when revalidating zones
  block: Introduce zone write plugging
  block: Fake max open zones limit when there is no limit
  block: Allow zero value of max_zone_append_sectors queue limit
  block: Implement zone append emulation
  block: Allow BIO-based drivers to use blk_revalidate_disk_zones()
  dm: Use the block layer zone append emulation
  scsi: sd: Use the block layer zone append emulation
  ublk_drv: Do not request ELEVATOR_F_ZBD_SEQ_WRITE elevator feature
  null_blk: Do not request ELEVATOR_F_ZBD_SEQ_WRITE elevator feature
  null_blk: Introduce zone_append_max_sectors attribute
  null_blk: Introduce fua attribute
  nvmet: zns: Do not reference the gendisk conv_zones_bitmap
  block: Remove BLK_STS_ZONE_RESOURCE
  block: Simplify blk_revalidate_disk_zones() interface
  block: mq-deadline: Remove support for zone write locking
  block: Remove elevator required features
  block: Do not check zone type in blk_check_zone_append()
  block: Move zone related debugfs attribute to blk-zoned.c
  block: Replace zone_wlock debugfs entry with zone_wplugs entry
  block: Remove zone write locking
  block: Do not force select mq-deadline with CONFIG_BLK_DEV_ZONED
  block: Do not special-case plugging of zone write operations

 block/Kconfig                     |    5 -
 block/Makefile                    |    1 -
 block/bio.c                       |    2 +
 block/blk-core.c                  |   11 +-
 block/blk-flush.c                 |    1 +
 block/blk-merge.c                 |   23 +-
 block/blk-mq-debugfs-zoned.c      |   22 -
 block/blk-mq-debugfs.c            |    3 +-
 block/blk-mq-debugfs.h            |    6 +-
 block/blk-mq.c                    |  125 ++-
 block/blk-mq.h                    |   31 -
 block/blk-settings.c              |   46 +-
 block/blk-sysfs.c                 |    2 +-
 block/blk-zoned.c                 | 1338 +++++++++++++++++++++++++++--
 block/blk.h                       |   84 +-
 block/elevator.c                  |   46 +-
 block/elevator.h                  |    1 -
 block/genhd.c                     |    3 +-
 block/mq-deadline.c               |  176 +---
 drivers/block/null_blk/main.c     |   22 +-
 drivers/block/null_blk/null_blk.h |    2 +
 drivers/block/null_blk/zoned.c    |   21 +-
 drivers/block/ublk_drv.c          |    5 +-
 drivers/block/virtio_blk.c        |    2 +-
 drivers/md/dm-core.h              |    2 +-
 drivers/md/dm-zone.c              |  476 +---------
 drivers/md/dm.c                   |   72 +-
 drivers/md/dm.h                   |    2 -
 drivers/nvme/host/core.c          |    2 +-
 drivers/nvme/target/zns.c         |   10 +-
 drivers/scsi/scsi_lib.c           |    1 -
 drivers/scsi/sd.c                 |    8 -
 drivers/scsi/sd.h                 |   19 -
 drivers/scsi/sd_zbc.c             |  335 +-------
 include/linux/blk-mq.h            |   85 +-
 include/linux/blk_types.h         |   30 +-
 include/linux/blkdev.h            |  102 +--
 37 files changed, 1659 insertions(+), 1463 deletions(-)
 delete mode 100644 block/blk-mq-debugfs-zoned.c

-- 
2.44.0

[PATCH v7 01/28] block: Restore sector of flush requests

[Damien Le Moal]

On completion of a flush sequence, blk_flush_restore_request() restores
the bio of a request to the original submitted BIO. However, the last
use of the request in the flush sequence may have been for a POSTFLUSH
which does not have a sector. So make sure to restore the request sector
using the iter sector of the original BIO. This BIO has not changed yet
since the completions of the flush sequence intermediate steps use
requeueing of the request until all steps are completed.

Restoring the request sector ensures that blk_mq_end_request() will see
a valid sector as originally set when the flush BIO was submitted.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 block/blk-flush.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/block/blk-flush.c b/block/blk-flush.c
index b0f314f4bc14..2f58ae018464 100644
--- a/block/blk-flush.c
+++ b/block/blk-flush.c
@@ -130,6 +130,7 @@ static void blk_flush_restore_request(struct request *rq)
 	 * original @rq->bio.  Restore it.
 	 */
 	rq->bio = rq->biotail;
+	rq->__sector = rq->bio->bi_iter.bi_sector;
 
 	/* make @rq a normal request */
 	rq->rq_flags &= ~RQF_FLUSH_SEQ;
-- 
2.44.0

[PATCH v7 02/28] block: Remove req_bio_endio()

[Damien Le Moal]

Moving req_bio_endio() code into its only caller, blk_update_request(),
allows reducing accesses to and tests of bio and request fields. Also,
given that partial completions of zone append operations is not
possible and that zone append operations cannot be merged, the update
of the BIO sector using the request sector for these operations can be
moved directly before the call to bio_endio().

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 block/blk-mq.c | 58 ++++++++++++++++++++++++--------------------------
 1 file changed, 28 insertions(+), 30 deletions(-)

diff --git a/block/blk-mq.c b/block/blk-mq.c
index b8dbfed8b28b..fcbf0953a179 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -762,31 +762,6 @@ void blk_dump_rq_flags(struct request *rq, char *msg)
 }
 EXPORT_SYMBOL(blk_dump_rq_flags);
 
-static void req_bio_endio(struct request *rq, struct bio *bio,
-			  unsigned int nbytes, blk_status_t error)
-{
-	if (unlikely(error)) {
-		bio->bi_status = error;
-	} else if (req_op(rq) == REQ_OP_ZONE_APPEND) {
-		/*
-		 * Partial zone append completions cannot be supported as the
-		 * BIO fragments may end up not being written sequentially.
-		 */
-		if (bio->bi_iter.bi_size != nbytes)
-			bio->bi_status = BLK_STS_IOERR;
-		else
-			bio->bi_iter.bi_sector = rq->__sector;
-	}
-
-	bio_advance(bio, nbytes);
-
-	if (unlikely(rq->rq_flags & RQF_QUIET))
-		bio_set_flag(bio, BIO_QUIET);
-	/* don't actually finish bio if it's part of flush sequence */
-	if (bio->bi_iter.bi_size == 0 && !(rq->rq_flags & RQF_FLUSH_SEQ))
-		bio_endio(bio);
-}
-
 static void blk_account_io_completion(struct request *req, unsigned int bytes)
 {
 	if (req->part && blk_do_io_stat(req)) {
@@ -890,6 +865,8 @@ static void blk_complete_request(struct request *req)
 bool blk_update_request(struct request *req, blk_status_t error,
 		unsigned int nr_bytes)
 {
+	bool is_flush = req->rq_flags & RQF_FLUSH_SEQ;
+	bool quiet = req->rq_flags & RQF_QUIET;
 	int total_bytes;
 
 	trace_block_rq_complete(req, error, nr_bytes);
@@ -910,9 +887,8 @@ bool blk_update_request(struct request *req, blk_status_t error,
 	if (blk_crypto_rq_has_keyslot(req) && nr_bytes >= blk_rq_bytes(req))
 		__blk_crypto_rq_put_keyslot(req);
 
-	if (unlikely(error && !blk_rq_is_passthrough(req) &&
-		     !(req->rq_flags & RQF_QUIET)) &&
-		     !test_bit(GD_DEAD, &req->q->disk->state)) {
+	if (unlikely(error && !blk_rq_is_passthrough(req) && !quiet) &&
+	    !test_bit(GD_DEAD, &req->q->disk->state)) {
 		blk_print_req_error(req, error);
 		trace_block_rq_error(req, error, nr_bytes);
 	}
@@ -924,12 +900,34 @@ bool blk_update_request(struct request *req, blk_status_t error,
 		struct bio *bio = req->bio;
 		unsigned bio_bytes = min(bio->bi_iter.bi_size, nr_bytes);
 
-		if (bio_bytes == bio->bi_iter.bi_size)
+		if (unlikely(error))
+			bio->bi_status = error;
+
+		if (bio_bytes == bio->bi_iter.bi_size) {
 			req->bio = bio->bi_next;
+		} else if (req_op(req) == REQ_OP_ZONE_APPEND &&
+			   error == BLK_STS_OK) {
+			/*
+			 * Partial zone append completions cannot be supported
+			 * as the BIO fragments may end up not being written
+			 * sequentially.
+			 */
+			bio->bi_status = BLK_STS_IOERR;
+		}
 
 		/* Completion has already been traced */
 		bio_clear_flag(bio, BIO_TRACE_COMPLETION);
-		req_bio_endio(req, bio, bio_bytes, error);
+		if (unlikely(quiet))
+			bio_set_flag(bio, BIO_QUIET);
+
+		bio_advance(bio, bio_bytes);
+
+		/* Don't actually finish bio if it's part of flush sequence */
+		if (!bio->bi_iter.bi_size && !is_flush) {
+			if (req_op(req) == REQ_OP_ZONE_APPEND)
+				bio->bi_iter.bi_sector = req->__sector;
+			bio_endio(bio);
+		}
 
 		total_bytes += bio_bytes;
 		nr_bytes -= bio_bytes;
-- 
2.44.0

[PATCH v7 03/28] block: Introduce blk_zone_update_request_bio()

[Damien Le Moal]

On completion of a zone append request, the request sector indicates the
location of the written data. This value must be returned to the user
through the BIO iter sector. This is done in 2 places: in
blk_complete_request() and in blk_update_request(). Introduce the inline
helper function blk_zone_update_request_bio() to avoid duplicating
this BIO update for zone append requests, and to compile out this
helper call when CONFIG_BLK_DEV_ZONED is not enabled.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 block/blk-mq.c | 11 +++++------
 block/blk.h    | 19 ++++++++++++++++++-
 2 files changed, 23 insertions(+), 7 deletions(-)

diff --git a/block/blk-mq.c b/block/blk-mq.c
index fcbf0953a179..88b541e8873f 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -821,8 +821,7 @@ static void blk_complete_request(struct request *req)
 		/* Completion has already been traced */
 		bio_clear_flag(bio, BIO_TRACE_COMPLETION);
 
-		if (req_op(req) == REQ_OP_ZONE_APPEND)
-			bio->bi_iter.bi_sector = req->__sector;
+		blk_zone_update_request_bio(req, bio);
 
 		if (!is_flush)
 			bio_endio(bio);
@@ -923,10 +922,10 @@ bool blk_update_request(struct request *req, blk_status_t error,
 		bio_advance(bio, bio_bytes);
 
 		/* Don't actually finish bio if it's part of flush sequence */
-		if (!bio->bi_iter.bi_size && !is_flush) {
-			if (req_op(req) == REQ_OP_ZONE_APPEND)
-				bio->bi_iter.bi_sector = req->__sector;
-			bio_endio(bio);
+		if (!bio->bi_iter.bi_size) {
+			blk_zone_update_request_bio(req, bio);
+			if (!is_flush)
+				bio_endio(bio);
 		}
 
 		total_bytes += bio_bytes;
diff --git a/block/blk.h b/block/blk.h
index d9f584984bc4..17786052f32d 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -408,12 +408,29 @@ static inline struct bio *blk_queue_bounce(struct bio *bio,
 
 #ifdef CONFIG_BLK_DEV_ZONED
 void disk_free_zone_bitmaps(struct gendisk *disk);
+static inline void blk_zone_update_request_bio(struct request *rq,
+					       struct bio *bio)
+{
+	/*
+	 * For zone append requests, the request sector indicates the location
+	 * at which the BIO data was written. Return this value to the BIO
+	 * issuer through the BIO iter sector.
+	 */
+	if (req_op(rq) == REQ_OP_ZONE_APPEND)
+		bio->bi_iter.bi_sector = rq->__sector;
+}
 int blkdev_report_zones_ioctl(struct block_device *bdev, unsigned int cmd,
 		unsigned long arg);
 int blkdev_zone_mgmt_ioctl(struct block_device *bdev, blk_mode_t mode,
 		unsigned int cmd, unsigned long arg);
 #else /* CONFIG_BLK_DEV_ZONED */
-static inline void disk_free_zone_bitmaps(struct gendisk *disk) {}
+static inline void disk_free_zone_bitmaps(struct gendisk *disk)
+{
+}
+static inline void blk_zone_update_request_bio(struct request *rq,
+					       struct bio *bio)
+{
+}
 static inline int blkdev_report_zones_ioctl(struct block_device *bdev,
 		unsigned int cmd, unsigned long arg)
 {
-- 
2.44.0

[PATCH v7 04/28] block: Introduce bio_straddles_zones() and bio_offset_from_zone_start()

[Damien Le Moal]

Implement the inline helper functions bio_straddles_zones() and
bio_offset_from_zone_start() to respectively test if a BIO crosses a
zone boundary (the start sector and last sector belong to different
zones) and to obtain the offset of a BIO from the start sector of its
target zone.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 include/linux/blkdev.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 172c91879999..0380b7e6f818 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -853,6 +853,13 @@ static inline unsigned int bio_zone_no(struct bio *bio)
 	return disk_zone_no(bio->bi_bdev->bd_disk, bio->bi_iter.bi_sector);
 }
 
+static inline bool bio_straddles_zones(struct bio *bio)
+{
+	return bio_sectors(bio) &&
+		bio_zone_no(bio) !=
+		disk_zone_no(bio->bi_bdev->bd_disk, bio_end_sector(bio) - 1);
+}
+
 static inline unsigned int bio_zone_is_seq(struct bio *bio)
 {
 	return disk_zone_is_seq(bio->bi_bdev->bd_disk, bio->bi_iter.bi_sector);
@@ -1328,6 +1335,12 @@ static inline sector_t bdev_offset_from_zone_start(struct block_device *bdev,
 	return sector & (bdev_zone_sectors(bdev) - 1);
 }
 
+static inline sector_t bio_offset_from_zone_start(struct bio *bio)
+{
+	return bdev_offset_from_zone_start(bio->bi_bdev,
+					   bio->bi_iter.bi_sector);
+}
+
 static inline bool bdev_is_zone_start(struct block_device *bdev,
 				      sector_t sector)
 {
-- 
2.44.0

[PATCH v7 05/28] block: Allow using bio_attempt_back_merge() internally

[Damien Le Moal]

Remove "static" from the definition of bio_attempt_back_merge() and
declare this function in block/blk.h to allow using it internally from
other block layer files. The definition of enum bio_merge_status is
also moved to block/blk.h.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 block/blk-merge.c | 8 +-------
 block/blk.h       | 8 ++++++++
 2 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/block/blk-merge.c b/block/blk-merge.c
index 4e3483a16b75..3363b1321908 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -972,13 +972,7 @@ static void blk_account_io_merge_bio(struct request *req)
 	part_stat_unlock();
 }
 
-enum bio_merge_status {
-	BIO_MERGE_OK,
-	BIO_MERGE_NONE,
-	BIO_MERGE_FAILED,
-};
-
-static enum bio_merge_status bio_attempt_back_merge(struct request *req,
+enum bio_merge_status bio_attempt_back_merge(struct request *req,
 		struct bio *bio, unsigned int nr_segs)
 {
 	const blk_opf_t ff = bio_failfast(bio);
diff --git a/block/blk.h b/block/blk.h
index 17786052f32d..bca50a9510c8 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -269,6 +269,14 @@ static inline void bio_integrity_free(struct bio *bio)
 unsigned long blk_rq_timeout(unsigned long timeout);
 void blk_add_timer(struct request *req);
 
+enum bio_merge_status {
+	BIO_MERGE_OK,
+	BIO_MERGE_NONE,
+	BIO_MERGE_FAILED,
+};
+
+enum bio_merge_status bio_attempt_back_merge(struct request *req,
+		struct bio *bio, unsigned int nr_segs);
 bool blk_attempt_plug_merge(struct request_queue *q, struct bio *bio,
 		unsigned int nr_segs);
 bool blk_bio_list_merge(struct request_queue *q, struct list_head *list,
-- 
2.44.0

[PATCH v7 06/28] block: Remember zone capacity when revalidating zones

[Damien Le Moal]

In preparation for adding zone write plugging, modify
blk_revalidate_disk_zones() to get the capacity of zones of a zoned
block device. This capacity value as a number of 512B sectors is stored
in the gendisk zone_capacity field.

Given that host-managed SMR disks (including zoned UFS drives) and all
known NVMe ZNS devices have the same zone capacity for all zones
blk_revalidate_disk_zones() returns an error if different capacities are
detected for different zones.

This also adds check to verify that the values reported by the device
for zone capacities are correct, that is, that the zone capacity is
never 0, does not exceed the zone size and is equal to the zone size for
conventional zones.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 block/blk-zoned.c      | 26 ++++++++++++++++++++++++++
 include/linux/blkdev.h |  1 +
 2 files changed, 27 insertions(+)

diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index da0f4b2a8fa0..23d9bb21c459 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -438,6 +438,7 @@ struct blk_revalidate_zone_args {
 	unsigned long	*conv_zones_bitmap;
 	unsigned long	*seq_zones_wlock;
 	unsigned int	nr_zones;
+	unsigned int	zone_capacity;
 	sector_t	sector;
 };
 
@@ -482,9 +483,20 @@ static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
 		return -ENODEV;
 	}
 
+	if (!zone->capacity || zone->capacity > zone->len) {
+		pr_warn("%s: Invalid zone capacity\n",
+			disk->disk_name);
+		return -ENODEV;
+	}
+
 	/* Check zone type */
 	switch (zone->type) {
 	case BLK_ZONE_TYPE_CONVENTIONAL:
+		if (zone->capacity != zone->len) {
+			pr_warn("%s: Invalid conventional zone capacity\n",
+				disk->disk_name);
+			return -ENODEV;
+		}
 		if (!args->conv_zones_bitmap) {
 			args->conv_zones_bitmap =
 				blk_alloc_zone_bitmap(q->node, args->nr_zones);
@@ -500,6 +512,18 @@ static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
 			if (!args->seq_zones_wlock)
 				return -ENOMEM;
 		}
+
+		/*
+		 * Remember the capacity of the first sequential zone and check
+		 * if it is constant for all zones.
+		 */
+		if (!args->zone_capacity)
+			args->zone_capacity = zone->capacity;
+		if (zone->capacity != args->zone_capacity) {
+			pr_warn("%s: Invalid variable zone capacity\n",
+				disk->disk_name);
+			return -ENODEV;
+		}
 		break;
 	case BLK_ZONE_TYPE_SEQWRITE_PREF:
 	default:
@@ -595,6 +619,7 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
 	blk_mq_freeze_queue(q);
 	if (ret > 0) {
 		disk->nr_zones = args.nr_zones;
+		disk->zone_capacity = args.zone_capacity;
 		swap(disk->seq_zones_wlock, args.seq_zones_wlock);
 		swap(disk->conv_zones_bitmap, args.conv_zones_bitmap);
 		if (update_driver_data)
@@ -608,6 +633,7 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
 
 	kfree(args.seq_zones_wlock);
 	kfree(args.conv_zones_bitmap);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(blk_revalidate_disk_zones);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 0380b7e6f818..7f3d85d5486b 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -191,6 +191,7 @@ struct gendisk {
 	 * blk_mq_unfreeze_queue().
 	 */
 	unsigned int		nr_zones;
+	unsigned int		zone_capacity;
 	unsigned long		*conv_zones_bitmap;
 	unsigned long		*seq_zones_wlock;
 #endif /* CONFIG_BLK_DEV_ZONED */
-- 
2.44.0

[PATCH v7 07/28] block: Introduce zone write plugging

[Damien Le Moal]

Zone write plugging implements a per-zone "plug" for write operations
to control the submission and execution order of write operations to
sequential write required zones of a zoned block device. Per-zone
plugging guarantees that at any time there is at most only one write
request per zone being executed. This mechanism is intended to replace
zone write locking which implements a similar per-zone write throttling
at the scheduler level, but is implemented only by mq-deadline.

Unlike zone write locking which operates on requests, zone write
plugging operates on BIOs. A zone write plug is simply a BIO list that
is atomically manipulated using a spinlock and a kblockd submission
work. A write BIO to a zone is "plugged" to delay its execution if a
write BIO for the same zone was already issued, that is, if a write
request for the same zone is being executed. The next plugged BIO is
unplugged and issued once the write request completes.

This mechanism allows to:
 - Untangle zone write ordering from block IO schedulers. This allows
   removing the restriction on using mq-deadline for writing to zoned
   block devices. Any block IO scheduler, including "none" can be used.
 - Zone write plugging operates on BIOs instead of requests. Plugged
   BIOs waiting for execution thus do not hold scheduling tags and thus
   are not preventing other BIOs from executing (reads or writes to
   other zones). Depending on the workload, this can significantly
   improve the device use (higher queue depth operation) and
   performance.
 - Both blk-mq (request based) zoned devices and BIO-based zoned devices
   (e.g.  device mapper) can use zone write plugging. It is mandatory
   for the former but optional for the latter. BIO-based drivers can
   use zone write plugging to implement write ordering guarantees, or
   the drivers can implement their own if needed.
 - The code is less invasive in the block layer and is mostly limited to
   blk-zoned.c with some small changes in blk-mq.c, blk-merge.c and
   bio.c.

Zone write plugging is implemented using struct blk_zone_wplug. This
structure includes a spinlock, a BIO list and a work structure to
handle the submission of plugged BIOs. Zone write plugs structures are
managed using a per-disk hash table.

Plugging of zone write BIOs is done using the function
blk_zone_write_plug_bio() which returns false if a BIO execution does
not need to be delayed and true otherwise. This function is called
from blk_mq_submit_bio() after a BIO is split to avoid large BIOs
spanning multiple zones which would cause mishandling of zone write
plugs. This ichange enables by default zone write plugging for any mq
request-based block device. BIO-based device drivers can also use zone
write plugging by expliclty calling blk_zone_write_plug_bio() in their
->submit_bio method. For such devices, the driver must ensure that a
BIO passed to blk_zone_write_plug_bio() is already split and not
straddling zone boundaries.

Only write and write zeroes BIOs are plugged. Zone write plugging does
not introduce any significant overhead for other operations. A BIO that
is being handled through zone write plugging is flagged using the new
BIO flag BIO_ZONE_WRITE_PLUGGING. A request handling a BIO flagged with
this new flag is flagged with the new RQF_ZONE_WRITE_PLUGGING flag.
The completion of BIOs and requests flagged trigger respectively calls
to the functions blk_zone_write_bio_endio() and
blk_zone_write_complete_request(). The latter function is used to
trigger submission of the next plugged BIO using the zone plug work.
blk_zone_write_bio_endio() does the same for BIO-based devices.
This ensures that at any time, at most one request (blk-mq devices) or
one BIO (BIO-based devices) is being executed for any zone. The
handling of zone write plugs using a per-zone plug spinlock maximizes
parallelism and device usage by allowing multiple zones to be writen
simultaneously without lock contention.

Zone write plugging ignores flush BIOs without data. Hovever, any flush
BIO that has data is always plugged so that the write part of the flush
sequence is serialized with other regular writes.

Given that any BIO handled through zone write plugging will be the only
BIO in flight for the target zone when it is executed, the unplugging
and submission of a BIO will have no chance of successfully merging with
plugged requests or requests in the scheduler. To overcome this
potential performance degradation, blk_mq_submit_bio() calls the
function blk_zone_write_plug_attempt_merge() to try to merge other
plugged BIOs with the one just unplugged and submitted. Successful
merging is signaled using blk_zone_write_plug_bio_merged(), called from
bio_attempt_back_merge(). Furthermore, to avoid recalculating the number
of segments of plugged BIOs to attempt merging, the number of segments
of a plugged BIO is saved using the new struct bio field
__bi_nr_segments. To avoid growing the size of struct bio, this field is
added as a union with the bio_cookie field. This is safe to do as
polling is always disabled for plugged BIOs.

When BIOs are plugged in a zone write plug, the device request queue
usage counter is always incremented. This reference is kept and reused
for blk-mq devices when the plugged BIO is unplugged and submitted
again using submit_bio_noacct_nocheck(). For this case, the unplugged
BIO is already flagged with BIO_ZONE_WRITE_PLUGGING and
blk_mq_submit_bio() proceeds directly to allocating a new request for
the BIO, re-using the usage reference count taken when the BIO was
plugged. This extra reference count is dropped in
blk_zone_write_plug_attempt_merge() for any plugged BIO that is
successfully merged. Given that BIO-based devices will not take this
path, the extra reference is dropped after a plugged BIO is unplugged
and submitted.

Zone write plugs are dynamically allocated and managed using a hash
table (an array of struct hlist_head) with RCU protection.
A zone write plug is allocated when a write BIO is received for the
zone and not freed until the zone is fully written, reset or finished.
To detect when a zone write plug can be freed, the write state of each
zone is tracked using a write pointer offset which corresponds to the
offset of a zone write pointer relative to the zone start. Write
operations always increment this write pointer offset. Zone reset
operations set it to 0 and zone finish operations set it to the zone
size.

If a write error happens, the wp_offset value of a zone write plug may
become incorrect and out of sync with the device managed write pointer.
This is handled using the zone write plug flag BLK_ZONE_WPLUG_ERROR.
The function blk_zone_wplug_handle_error() is called from the new disk
zone write plug work when this flag is set. This function executes a
report zone to update the zone write pointer offset to the current
value as indicated by the device. The disk zone write plug work is
scheduled whenever a BIO flagged with BIO_ZONE_WRITE_PLUGGING completes
with an error or when bio_zone_wplug_prepare_bio() detects an unaligned
write. Once scheduled, the disk zone write plugs work keeps running
until all zone errors are handled.

To match the new data structures used for zoned disks, the function
disk_free_zone_bitmaps() is renamed to the more generic
disk_free_zone_resources(). The function disk_init_zone_resources() is
also introduced to initialize zone write plugs resources when a gendisk
is allocated.

In order to guarantee that the user can simultaneously write up to a
number of zones equal to a device max active zone limit or max open zone
limit, zone write plugs are allocated using a mempool sized to the
maximum of these 2 device limits. For a device that does not have
active and open zone limits, 128 is used as the default mempool size.

If a change to the device active and open zone limits is detected, the
disk mempool is resized when blk_revalidate_disk_zones() is executed.

This commit contains contributions from Christoph Hellwig <hch@lst.de>.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
---
 block/bio.c               |    2 +
 block/blk-merge.c         |   12 +
 block/blk-mq.c            |   32 +-
 block/blk-zoned.c         | 1091 ++++++++++++++++++++++++++++++++++++-
 block/blk.h               |   51 +-
 block/genhd.c             |    3 +-
 include/linux/blk-mq.h    |    2 +
 include/linux/blk_types.h |    8 +-
 include/linux/blkdev.h    |   11 +
 9 files changed, 1201 insertions(+), 11 deletions(-)

diff --git a/block/bio.c b/block/bio.c
index d24420ed1c4c..38baedb39c6f 100644
--- a/block/bio.c
+++ b/block/bio.c
@@ -1576,6 +1576,8 @@ void bio_endio(struct bio *bio)
 	if (!bio_integrity_endio(bio))
 		return;
 
+	blk_zone_bio_endio(bio);
+
 	rq_qos_done_bio(bio);
 
 	if (bio->bi_bdev && bio_flagged(bio, BIO_TRACE_COMPLETION)) {
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 3363b1321908..7f8a808b74c1 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -377,6 +377,7 @@ struct bio *__bio_split_to_limits(struct bio *bio,
 		blkcg_bio_issue_init(split);
 		bio_chain(split, bio);
 		trace_block_split(split, bio->bi_iter.bi_sector);
+		WARN_ON_ONCE(bio_zone_write_plugging(bio));
 		submit_bio_noacct(bio);
 		return split;
 	}
@@ -988,6 +989,9 @@ enum bio_merge_status bio_attempt_back_merge(struct request *req,
 
 	blk_update_mixed_merge(req, bio, false);
 
+	if (req->rq_flags & RQF_ZONE_WRITE_PLUGGING)
+		blk_zone_write_plug_bio_merged(bio);
+
 	req->biotail->bi_next = bio;
 	req->biotail = bio;
 	req->__data_len += bio->bi_iter.bi_size;
@@ -1003,6 +1007,14 @@ static enum bio_merge_status bio_attempt_front_merge(struct request *req,
 {
 	const blk_opf_t ff = bio_failfast(bio);
 
+	/*
+	 * A front merge for writes to sequential zones of a zoned block device
+	 * can happen only if the user submitted writes out of order. Do not
+	 * merge such write to let it fail.
+	 */
+	if (req->rq_flags & RQF_ZONE_WRITE_PLUGGING)
+		return BIO_MERGE_FAILED;
+
 	if (!ll_front_merge_fn(req, bio, nr_segs))
 		return BIO_MERGE_FAILED;
 
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 88b541e8873f..48eb7dd049d1 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -828,6 +828,8 @@ static void blk_complete_request(struct request *req)
 		bio = next;
 	} while (bio);
 
+	blk_zone_complete_request(req);
+
 	/*
 	 * Reset counters so that the request stacking driver
 	 * can find how many bytes remain in the request
@@ -939,6 +941,7 @@ bool blk_update_request(struct request *req, blk_status_t error,
 	 * completely done
 	 */
 	if (!req->bio) {
+		blk_zone_complete_request(req);
 		/*
 		 * Reset counters so that the request stacking driver
 		 * can find how many bytes remain in the request
@@ -2963,15 +2966,30 @@ void blk_mq_submit_bio(struct bio *bio)
 	struct request *rq;
 	blk_status_t ret;
 
+	/*
+	 * If the plug has a cached request for this queue, try to use it.
+	 */
+	rq = blk_mq_peek_cached_request(plug, q, bio->bi_opf);
+
+	/*
+	 * A BIO that was released from a zone write plug has already been
+	 * through the preparation in this function, already holds a reference
+	 * on the queue usage counter, and is the only write BIO in-flight for
+	 * the target zone. Go straight to preparing a request for it.
+	 */
+	if (bio_zone_write_plugging(bio)) {
+		nr_segs = bio->__bi_nr_segments;
+		if (rq)
+			blk_queue_exit(q);
+		goto new_request;
+	}
+
 	bio = blk_queue_bounce(bio, q);
 
 	/*
-	 * If the plug has a cached request for this queue, try use it.
-	 *
 	 * The cached request already holds a q_usage_counter reference and we
 	 * don't have to acquire a new one if we use it.
 	 */
-	rq = blk_mq_peek_cached_request(plug, q, bio->bi_opf);
 	if (!rq) {
 		if (unlikely(bio_queue_enter(bio)))
 			return;
@@ -2988,6 +3006,10 @@ void blk_mq_submit_bio(struct bio *bio)
 	if (blk_mq_attempt_bio_merge(q, bio, nr_segs))
 		goto queue_exit;
 
+	if (blk_queue_is_zoned(q) && blk_zone_plug_bio(bio, nr_segs))
+		goto queue_exit;
+
+new_request:
 	if (!rq) {
 		rq = blk_mq_get_new_requests(q, plug, bio, nr_segs);
 		if (unlikely(!rq))
@@ -3006,6 +3028,7 @@ void blk_mq_submit_bio(struct bio *bio)
 	if (ret != BLK_STS_OK) {
 		bio->bi_status = ret;
 		bio_endio(bio);
+		blk_zone_complete_request(rq);
 		blk_mq_free_request(rq);
 		return;
 	}
@@ -3013,6 +3036,9 @@ void blk_mq_submit_bio(struct bio *bio)
 	if (op_is_flush(bio->bi_opf) && blk_insert_flush(rq))
 		return;
 
+	if (bio_zone_write_plugging(bio))
+		blk_zone_write_plug_attempt_merge(rq);
+
 	if (plug) {
 		blk_add_rq_to_plug(plug, rq);
 		return;
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index 23d9bb21c459..fefcebd70445 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -7,6 +7,7 @@
  *
  * Copyright (c) 2016, Damien Le Moal
  * Copyright (c) 2016, Western Digital
+ * Copyright (c) 2024, Western Digital Corporation or its affiliates.
  */
 
 #include <linux/kernel.h>
@@ -16,8 +17,12 @@
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/sched/mm.h>
+#include <linux/spinlock.h>
+#include <linux/atomic.h>
+#include <linux/mempool.h>
 
 #include "blk.h"
+#include "blk-mq-sched.h"
 
 #define ZONE_COND_NAME(name) [BLK_ZONE_COND_##name] = #name
 static const char *const zone_cond_name[] = {
@@ -32,6 +37,64 @@ static const char *const zone_cond_name[] = {
 };
 #undef ZONE_COND_NAME
 
+/*
+ * Per-zone write plug.
+ * @node: hlist_node structure for managing the plug using a hash table.
+ * @link: To list the plug in the zone write plug error list of the disk.
+ * @ref: Zone write plug reference counter. A zone write plug reference is
+ *       always at least 1 when the plug is hashed in the disk plug hash table.
+ *       The reference is incremented whenever a new BIO needing plugging is
+ *       submitted and when a function needs to manipulate a plug. The
+ *       reference count is decremented whenever a plugged BIO completes and
+ *       when a function that referenced the plug returns. The initial
+ *       reference is dropped whenever the zone of the zone write plug is reset,
+ *       finished and when the zone becomes full (last write BIO to the zone
+ *       completes).
+ * @lock: Spinlock to atomically manipulate the plug.
+ * @flags: Flags indicating the plug state.
+ * @zone_no: The number of the zone the plug is managing.
+ * @wp_offset: The zone write pointer location relative to the start of the zone
+ *             as a number of 512B sectors.
+ * @bio_list: The list of BIOs that are currently plugged.
+ * @bio_work: Work struct to handle issuing of plugged BIOs
+ * @rcu_head: RCU head to free zone write plugs with an RCU grace period.
+ * @disk: The gendisk the plug belongs to.
+ */
+struct blk_zone_wplug {
+	struct hlist_node	node;
+	struct list_head	link;
+	atomic_t		ref;
+	spinlock_t		lock;
+	unsigned int		flags;
+	unsigned int		zone_no;
+	unsigned int		wp_offset;
+	struct bio_list		bio_list;
+	struct work_struct	bio_work;
+	struct rcu_head		rcu_head;
+	struct gendisk		*disk;
+};
+
+/*
+ * Zone write plug flags bits:
+ *  - BLK_ZONE_WPLUG_PLUGGED: Indicates that the zone write plug is plugged,
+ *    that is, that write BIOs are being throttled due to a write BIO already
+ *    being executed or the zone write plug bio list is not empty.
+ *  - BLK_ZONE_WPLUG_ERROR: Indicates that a write error happened which will be
+ *    recovered with a report zone to update the zone write pointer offset.
+ *  - BLK_ZONE_WPLUG_UNHASHED: Indicates that the zone write plug was removed
+ *    from the disk hash table and that the initial reference to the zone
+ *    write plug set when the plug was first added to the hash table has been
+ *    dropped. This flag is set when a zone is reset, finished or become full,
+ *    to prevent new references to the zone write plug to be taken for
+ *    newly incoming BIOs. A zone write plug flagged with this flag will be
+ *    freed once all remaining references from BIOs or functions are dropped.
+ */
+#define BLK_ZONE_WPLUG_PLUGGED		(1U << 0)
+#define BLK_ZONE_WPLUG_ERROR		(1U << 1)
+#define BLK_ZONE_WPLUG_UNHASHED		(1U << 2)
+
+#define BLK_ZONE_WPLUG_BUSY	(BLK_ZONE_WPLUG_PLUGGED | BLK_ZONE_WPLUG_ERROR)
+
 /**
  * blk_zone_cond_str - Return string XXX in BLK_ZONE_COND_XXX.
  * @zone_cond: BLK_ZONE_COND_XXX.
@@ -425,12 +488,1010 @@ int blkdev_zone_mgmt_ioctl(struct block_device *bdev, blk_mode_t mode,
 	return ret;
 }
 
-void disk_free_zone_bitmaps(struct gendisk *disk)
+static inline bool disk_zone_is_conv(struct gendisk *disk, sector_t sector)
+{
+	if (!disk->conv_zones_bitmap)
+		return false;
+	return test_bit(disk_zone_no(disk, sector), disk->conv_zones_bitmap);
+}
+
+static bool disk_insert_zone_wplug(struct gendisk *disk,
+				   struct blk_zone_wplug *zwplug)
+{
+	struct blk_zone_wplug *zwplg;
+	unsigned long flags;
+	unsigned int idx =
+		hash_32(zwplug->zone_no, disk->zone_wplugs_hash_bits);
+
+	/*
+	 * Add the new zone write plug to the hash table, but carefully as we
+	 * are racing with other submission context, so we may already have a
+	 * zone write plug for the same zone.
+	 */
+	spin_lock_irqsave(&disk->zone_wplugs_lock, flags);
+	hlist_for_each_entry_rcu(zwplg, &disk->zone_wplugs_hash[idx], node) {
+		if (zwplg->zone_no == zwplug->zone_no) {
+			spin_unlock_irqrestore(&disk->zone_wplugs_lock, flags);
+			return false;
+		}
+	}
+	hlist_add_head_rcu(&zwplug->node, &disk->zone_wplugs_hash[idx]);
+	spin_unlock_irqrestore(&disk->zone_wplugs_lock, flags);
+
+	return true;
+}
+
+static void disk_remove_zone_wplug(struct gendisk *disk,
+				   struct blk_zone_wplug *zwplug)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&disk->zone_wplugs_lock, flags);
+	zwplug->flags |= BLK_ZONE_WPLUG_UNHASHED;
+	atomic_dec(&zwplug->ref);
+	hlist_del_init_rcu(&zwplug->node);
+	spin_unlock_irqrestore(&disk->zone_wplugs_lock, flags);
+}
+
+static inline bool disk_should_remove_zone_wplug(struct gendisk *disk,
+						 struct blk_zone_wplug *zwplug)
+{
+	/* If the zone is still busy, the plug cannot be removed. */
+	if (zwplug->flags & BLK_ZONE_WPLUG_BUSY)
+		return false;
+
+	/* We can remove zone write plugs for zones that are empty or full. */
+	return !zwplug->wp_offset || zwplug->wp_offset >= disk->zone_capacity;
+}
+
+static struct blk_zone_wplug *disk_get_zone_wplug(struct gendisk *disk,
+						  sector_t sector)
+{
+	unsigned int zno = disk_zone_no(disk, sector);
+	unsigned int idx = hash_32(zno, disk->zone_wplugs_hash_bits);
+	struct blk_zone_wplug *zwplug;
+
+	rcu_read_lock();
+
+	hlist_for_each_entry_rcu(zwplug, &disk->zone_wplugs_hash[idx], node) {
+		if (zwplug->zone_no == zno &&
+		    atomic_inc_not_zero(&zwplug->ref)) {
+			rcu_read_unlock();
+			return zwplug;
+		}
+	}
+
+	rcu_read_unlock();
+
+	return NULL;
+}
+
+static void disk_free_zone_wplug_rcu(struct rcu_head *rcu_head)
+{
+	struct blk_zone_wplug *zwplug =
+		container_of(rcu_head, struct blk_zone_wplug, rcu_head);
+
+	mempool_free(zwplug, zwplug->disk->zone_wplugs_pool);
+}
+
+static inline void disk_put_zone_wplug(struct blk_zone_wplug *zwplug)
+{
+	if (atomic_dec_and_test(&zwplug->ref)) {
+		WARN_ON_ONCE(!bio_list_empty(&zwplug->bio_list));
+		WARN_ON_ONCE(!list_empty(&zwplug->link));
+
+		call_rcu(&zwplug->rcu_head, disk_free_zone_wplug_rcu);
+	}
+}
+
+static void blk_zone_wplug_bio_work(struct work_struct *work);
+
+/*
+ * Get a reference on the write plug for the zone containing @sector.
+ * If the plug does not exist, it is allocated and hashed.
+ * Return a pointer to the zone write plug with the plug spinlock held.
+ */
+static struct blk_zone_wplug *disk_get_and_lock_zone_wplug(struct gendisk *disk,
+					sector_t sector, gfp_t gfp_mask,
+					unsigned long *flags)
 {
+	unsigned int zno = disk_zone_no(disk, sector);
+	struct blk_zone_wplug *zwplug;
+
+again:
+	zwplug = disk_get_zone_wplug(disk, sector);
+	if (zwplug) {
+		/*
+		 * Check that a BIO completion or a zone reset or finish
+		 * operation has not already removed the zone write plug from
+		 * the hash table and dropped its reference count. In such case,
+		 * we need to get a new plug so start over from the beginning.
+		 */
+		spin_lock_irqsave(&zwplug->lock, *flags);
+		if (zwplug->flags & BLK_ZONE_WPLUG_UNHASHED) {
+			spin_unlock_irqrestore(&zwplug->lock, *flags);
+			disk_put_zone_wplug(zwplug);
+			goto again;
+		}
+		return zwplug;
+	}
+
+	/*
+	 * Allocate and initialize a zone write plug with an extra reference
+	 * so that it is not freed when the zone write plug becomes idle without
+	 * the zone being full.
+	 */
+	zwplug = mempool_alloc(disk->zone_wplugs_pool, gfp_mask);
+	if (!zwplug)
+		return NULL;
+
+	INIT_HLIST_NODE(&zwplug->node);
+	INIT_LIST_HEAD(&zwplug->link);
+	atomic_set(&zwplug->ref, 2);
+	spin_lock_init(&zwplug->lock);
+	zwplug->flags = 0;
+	zwplug->zone_no = zno;
+	zwplug->wp_offset = sector & (disk->queue->limits.chunk_sectors - 1);
+	bio_list_init(&zwplug->bio_list);
+	INIT_WORK(&zwplug->bio_work, blk_zone_wplug_bio_work);
+	zwplug->disk = disk;
+
+	spin_lock_irqsave(&zwplug->lock, *flags);
+
+	/*
+	 * Insert the new zone write plug in the hash table. This can fail only
+	 * if another context already inserted a plug. Retry from the beginning
+	 * in such case.
+	 */
+	if (!disk_insert_zone_wplug(disk, zwplug)) {
+		spin_unlock_irqrestore(&zwplug->lock, *flags);
+		mempool_free(zwplug, disk->zone_wplugs_pool);
+		goto again;
+	}
+
+	return zwplug;
+}
+
+static inline void blk_zone_wplug_bio_io_error(struct bio *bio)
+{
+	struct request_queue *q = bio->bi_bdev->bd_disk->queue;
+
+	bio_clear_flag(bio, BIO_ZONE_WRITE_PLUGGING);
+	bio_io_error(bio);
+	blk_queue_exit(q);
+}
+
+/*
+ * Abort (fail) all plugged BIOs of a zone write plug.
+ */
+static void disk_zone_wplug_abort(struct blk_zone_wplug *zwplug)
+{
+	struct bio *bio;
+
+	while ((bio = bio_list_pop(&zwplug->bio_list))) {
+		blk_zone_wplug_bio_io_error(bio);
+		disk_put_zone_wplug(zwplug);
+	}
+}
+
+/*
+ * Abort (fail) all plugged BIOs of a zone write plug that are not aligned
+ * with the assumed write pointer location of the zone when the BIO will
+ * be unplugged.
+ */
+static void disk_zone_wplug_abort_unaligned(struct gendisk *disk,
+					    struct blk_zone_wplug *zwplug)
+{
+	unsigned int zone_capacity = disk->zone_capacity;
+	unsigned int wp_offset = zwplug->wp_offset;
+	struct bio_list bl = BIO_EMPTY_LIST;
+	struct bio *bio;
+
+	while ((bio = bio_list_pop(&zwplug->bio_list))) {
+		if (wp_offset >= zone_capacity ||
+		     bio_offset_from_zone_start(bio) != wp_offset) {
+			blk_zone_wplug_bio_io_error(bio);
+			disk_put_zone_wplug(zwplug);
+			continue;
+		}
+
+		wp_offset += bio_sectors(bio);
+		bio_list_add(&bl, bio);
+	}
+
+	bio_list_merge(&zwplug->bio_list, &bl);
+}
+
+/*
+ * Set a zone write plug write pointer offset to either 0 (zone reset case)
+ * or to the zone size (zone finish case). This aborts all plugged BIOs, which
+ * is fine to do as doing a zone reset or zone finish while writes are in-flight
+ * is a mistake from the user which will most likely cause all plugged BIOs to
+ * fail anyway.
+ */
+static void disk_zone_wplug_set_wp_offset(struct gendisk *disk,
+					  struct blk_zone_wplug *zwplug,
+					  unsigned int wp_offset)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&zwplug->lock, flags);
+
+	/*
+	 * Make sure that a BIO completion or another zone reset or finish
+	 * operation has not already removed the plug from the hash table.
+	 */
+	if (zwplug->flags & BLK_ZONE_WPLUG_UNHASHED) {
+		spin_unlock_irqrestore(&zwplug->lock, flags);
+		return;
+	}
+
+	/* Update the zone write pointer and abort all plugged BIOs. */
+	zwplug->wp_offset = wp_offset;
+	disk_zone_wplug_abort(zwplug);
+
+	/*
+	 * Updating the write pointer offset puts back the zone
+	 * in a good state. So clear the error flag and decrement the
+	 * error count if we were in error state.
+	 */
+	if (zwplug->flags & BLK_ZONE_WPLUG_ERROR) {
+		zwplug->flags &= ~BLK_ZONE_WPLUG_ERROR;
+		spin_lock(&disk->zone_wplugs_lock);
+		list_del_init(&zwplug->link);
+		spin_unlock(&disk->zone_wplugs_lock);
+	}
+
+	/*
+	 * The zone write plug now has no BIO plugged: remove it from the
+	 * hash table so that it cannot be seen. The plug will be freed
+	 * when the last reference is dropped.
+	 */
+	if (disk_should_remove_zone_wplug(disk, zwplug))
+		disk_remove_zone_wplug(disk, zwplug);
+
+	spin_unlock_irqrestore(&zwplug->lock, flags);
+}
+
+static bool blk_zone_wplug_handle_reset_or_finish(struct bio *bio,
+						  unsigned int wp_offset)
+{
+	struct gendisk *disk = bio->bi_bdev->bd_disk;
+	sector_t sector = bio->bi_iter.bi_sector;
+	struct blk_zone_wplug *zwplug;
+
+	/* Conventional zones cannot be reset nor finished. */
+	if (disk_zone_is_conv(disk, sector)) {
+		bio_io_error(bio);
+		return true;
+	}
+
+	/*
+	 * If we have a zone write plug, set its write pointer offset to 0
+	 * (reset case) or to the zone size (finish case). This will abort all
+	 * BIOs plugged for the target zone. It is fine as resetting or
+	 * finishing zones while writes are still in-flight will result in the
+	 * writes failing anyway.
+	 */
+	zwplug = disk_get_zone_wplug(disk, sector);
+	if (zwplug) {
+		disk_zone_wplug_set_wp_offset(disk, zwplug, wp_offset);
+		disk_put_zone_wplug(zwplug);
+	}
+
+	return false;
+}
+
+static bool blk_zone_wplug_handle_reset_all(struct bio *bio)
+{
+	struct gendisk *disk = bio->bi_bdev->bd_disk;
+	struct blk_zone_wplug *zwplug;
+	sector_t sector;
+
+	/*
+	 * Set the write pointer offset of all zone write plugs to 0. This will
+	 * abort all plugged BIOs. It is fine as resetting zones while writes
+	 * are still in-flight will result in the writes failing anyway.
+	 */
+	for (sector = 0; sector < get_capacity(disk);
+	     sector += disk->queue->limits.chunk_sectors) {
+		zwplug = disk_get_zone_wplug(disk, sector);
+		if (zwplug) {
+			disk_zone_wplug_set_wp_offset(disk, zwplug, 0);
+			disk_put_zone_wplug(zwplug);
+		}
+	}
+
+	return false;
+}
+
+static inline void blk_zone_wplug_add_bio(struct blk_zone_wplug *zwplug,
+					  struct bio *bio, unsigned int nr_segs)
+{
+	/*
+	 * Grab an extra reference on the BIO request queue usage counter.
+	 * This reference will be reused to submit a request for the BIO for
+	 * blk-mq devices and dropped when the BIO is failed and after
+	 * it is issued in the case of BIO-based devices.
+	 */
+	percpu_ref_get(&bio->bi_bdev->bd_disk->queue->q_usage_counter);
+
+	/*
+	 * The BIO is being plugged and thus will have to wait for the on-going
+	 * write and for all other writes already plugged. So polling makes
+	 * no sense.
+	 */
+	bio_clear_polled(bio);
+
+	/*
+	 * Reuse the poll cookie field to store the number of segments when
+	 * split to the hardware limits.
+	 */
+	bio->__bi_nr_segments = nr_segs;
+
+	/*
+	 * We always receive BIOs after they are split and ready to be issued.
+	 * The block layer passes the parts of a split BIO in order, and the
+	 * user must also issue write sequentially. So simply add the new BIO
+	 * at the tail of the list to preserve the sequential write order.
+	 */
+	bio_list_add(&zwplug->bio_list, bio);
+}
+
+/*
+ * Called from bio_attempt_back_merge() when a BIO was merged with a request.
+ */
+void blk_zone_write_plug_bio_merged(struct bio *bio)
+{
+	struct blk_zone_wplug *zwplug;
+	unsigned long flags;
+
+	/*
+	 * If the BIO was already plugged, then we were called through
+	 * blk_zone_write_plug_attempt_merge() -> blk_attempt_bio_merge().
+	 * For this case, blk_zone_write_plug_attempt_merge() will handle the
+	 * zone write pointer offset update.
+	 */
+	if (bio_flagged(bio, BIO_ZONE_WRITE_PLUGGING))
+		return;
+
+	bio_set_flag(bio, BIO_ZONE_WRITE_PLUGGING);
+
+	/*
+	 * Increase the plug reference count and advance the zone write
+	 * pointer offset.
+	 */
+	zwplug = disk_get_zone_wplug(bio->bi_bdev->bd_disk,
+				     bio->bi_iter.bi_sector);
+	spin_lock_irqsave(&zwplug->lock, flags);
+	zwplug->wp_offset += bio_sectors(bio);
+	spin_unlock_irqrestore(&zwplug->lock, flags);
+}
+
+/*
+ * Attempt to merge plugged BIOs with a newly prepared request for a BIO that
+ * already went through zone write plugging (either a new BIO or one that was
+ * unplugged).
+ */
+void blk_zone_write_plug_attempt_merge(struct request *req)
+{
+	sector_t req_back_sector = blk_rq_pos(req) + blk_rq_sectors(req);
+	struct request_queue *q = req->q;
+	struct gendisk *disk = q->disk;
+	unsigned int zone_capacity = disk->zone_capacity;
+	struct blk_zone_wplug *zwplug =
+		disk_get_zone_wplug(disk, blk_rq_pos(req));
+	unsigned long flags;
+	struct bio *bio;
+
+	/*
+	 * Completion of this request needs to be handled with
+	 * blk_zone_write_plug_complete_request().
+	 */
+	req->rq_flags |= RQF_ZONE_WRITE_PLUGGING;
+
+	if (blk_queue_nomerges(q))
+		return;
+
+	/*
+	 * Walk through the list of plugged BIOs to check if they can be merged
+	 * into the back of the request.
+	 */
+	spin_lock_irqsave(&zwplug->lock, flags);
+	while (zwplug->wp_offset < zone_capacity) {
+		bio = bio_list_peek(&zwplug->bio_list);
+		if (!bio)
+			break;
+
+		if (bio->bi_iter.bi_sector != req_back_sector ||
+		    !blk_rq_merge_ok(req, bio))
+			break;
+
+		WARN_ON_ONCE(bio_op(bio) != REQ_OP_WRITE_ZEROES &&
+			     !bio->__bi_nr_segments);
+
+		bio_list_pop(&zwplug->bio_list);
+		if (bio_attempt_back_merge(req, bio, bio->__bi_nr_segments) !=
+		    BIO_MERGE_OK) {
+			bio_list_add_head(&zwplug->bio_list, bio);
+			break;
+		}
+
+		/*
+		 * Drop the extra reference on the queue usage we got when
+		 * plugging the BIO and advance the write pointer offset.
+		 */
+		blk_queue_exit(q);
+		zwplug->wp_offset += bio_sectors(bio);
+
+		req_back_sector += bio_sectors(bio);
+	}
+	spin_unlock_irqrestore(&zwplug->lock, flags);
+}
+
+static inline void disk_zone_wplug_set_error(struct gendisk *disk,
+					     struct blk_zone_wplug *zwplug)
+{
+	if (!(zwplug->flags & BLK_ZONE_WPLUG_ERROR)) {
+		unsigned long flags;
+
+		/*
+		 * Increase the plug reference count. The reference will be
+		 * dropped in disk_zone_wplugs_work() once the error state
+		 * is handled.
+		 */
+		zwplug->flags |= BLK_ZONE_WPLUG_ERROR;
+		atomic_inc(&zwplug->ref);
+
+		spin_lock_irqsave(&disk->zone_wplugs_lock, flags);
+		list_add_tail(&zwplug->link, &disk->zone_wplugs_err_list);
+		spin_unlock_irqrestore(&disk->zone_wplugs_lock, flags);
+	}
+}
+
+/*
+ * Check and prepare a BIO for submission by incrementing the write pointer
+ * offset of its zone write plug.
+ */
+static bool blk_zone_wplug_prepare_bio(struct blk_zone_wplug *zwplug,
+				       struct bio *bio)
+{
+	struct gendisk *disk = bio->bi_bdev->bd_disk;
+
+	/*
+	 * Check that the user is not attempting to write to a full zone.
+	 * We know such BIO will fail, and that would potentially overflow our
+	 * write pointer offset beyond the end of the zone.
+	 */
+	if (zwplug->wp_offset >= disk->zone_capacity)
+		goto err;
+
+	/*
+	 * Check for non-sequential writes early because we avoid a
+	 * whole lot of error handling trouble if we don't send it off
+	 * to the driver.
+	 */
+	if (bio_offset_from_zone_start(bio) != zwplug->wp_offset)
+		goto err;
+
+	/* Advance the zone write pointer offset. */
+	zwplug->wp_offset += bio_sectors(bio);
+
+	return true;
+
+err:
+	/* We detected an invalid write BIO: schedule error recovery. */
+	disk_zone_wplug_set_error(disk, zwplug);
+	kblockd_schedule_work(&disk->zone_wplugs_work);
+	return false;
+}
+
+static bool blk_zone_wplug_handle_write(struct bio *bio, unsigned int nr_segs)
+{
+	struct gendisk *disk = bio->bi_bdev->bd_disk;
+	sector_t sector = bio->bi_iter.bi_sector;
+	struct blk_zone_wplug *zwplug;
+	gfp_t gfp_mask = GFP_NOIO;
+	unsigned long flags;
+
+	/*
+	 * BIOs must be fully contained within a zone so that we use the correct
+	 * zone write plug for the entire BIO. For blk-mq devices, the block
+	 * layer should already have done any splitting required to ensure this
+	 * and this BIO should thus not be straddling zone boundaries. For
+	 * BIO-based devices, it is the responsibility of the driver to split
+	 * the bio before submitting it.
+	 */
+	if (WARN_ON_ONCE(bio_straddles_zones(bio))) {
+		bio_io_error(bio);
+		return true;
+	}
+
+	/* Conventional zones do not need write plugging. */
+	if (disk_zone_is_conv(disk, sector))
+		return false;
+
+	if (bio->bi_opf & REQ_NOWAIT)
+		gfp_mask = GFP_NOWAIT;
+
+	zwplug = disk_get_and_lock_zone_wplug(disk, sector, gfp_mask, &flags);
+	if (!zwplug) {
+		bio_io_error(bio);
+		return true;
+	}
+
+	/* Indicate that this BIO is being handled using zone write plugging. */
+	bio_set_flag(bio, BIO_ZONE_WRITE_PLUGGING);
+
+	/*
+	 * If the zone is already plugged or has a pending error, add the BIO
+	 * to the plug BIO list. Otherwise, plug and let the BIO execute.
+	 */
+	if (zwplug->flags & BLK_ZONE_WPLUG_BUSY)
+		goto plug;
+
+	/*
+	 * If an error is detected when preparing the BIO, add it to the BIO
+	 * list so that error recovery can deal with it.
+	 */
+	if (!blk_zone_wplug_prepare_bio(zwplug, bio))
+		goto plug;
+
+	zwplug->flags |= BLK_ZONE_WPLUG_PLUGGED;
+
+	spin_unlock_irqrestore(&zwplug->lock, flags);
+
+	return false;
+
+plug:
+	zwplug->flags |= BLK_ZONE_WPLUG_PLUGGED;
+	blk_zone_wplug_add_bio(zwplug, bio, nr_segs);
+
+	spin_unlock_irqrestore(&zwplug->lock, flags);
+
+	return true;
+}
+
+/**
+ * blk_zone_plug_bio - Handle a zone write BIO with zone write plugging
+ * @bio: The BIO being submitted
+ * @nr_segs: The number of physical segments of @bio
+ *
+ * Handle write and write zeroes operations using zone write plugging.
+ *
+ * Return true whenever @bio execution needs to be delayed through the zone
+ * write plug. Otherwise, return false to let the submission path process
+ * @bio normally.
+ */
+bool blk_zone_plug_bio(struct bio *bio, unsigned int nr_segs)
+{
+	struct block_device *bdev = bio->bi_bdev;
+
+	if (!bdev->bd_disk->zone_wplugs_hash)
+		return false;
+
+	/*
+	 * If the BIO already has the plugging flag set, then it was already
+	 * handled through this path and this is a submission from the zone
+	 * plug bio submit work.
+	 */
+	if (bio_flagged(bio, BIO_ZONE_WRITE_PLUGGING))
+		return false;
+
+	/*
+	 * We do not need to do anything special for empty flush BIOs, e.g
+	 * BIOs such as issued by blkdev_issue_flush(). The is because it is
+	 * the responsibility of the user to first wait for the completion of
+	 * write operations for flush to have any effect on the persistence of
+	 * the written data.
+	 */
+	if (op_is_flush(bio->bi_opf) && !bio_sectors(bio))
+		return false;
+
+	/*
+	 * Regular writes and write zeroes need to be handled through the target
+	 * zone write plug. This includes writes with REQ_FUA | REQ_PREFLUSH
+	 * which may need to go through the flush machinery depending on the
+	 * target device capabilities. Plugging such writes is fine as the flush
+	 * machinery operates at the request level, below the plug, and
+	 * completion of the flush sequence will go through the regular BIO
+	 * completion, which will handle zone write plugging.
+	 * Zone reset, reset all and finish commands need special treatment
+	 * to correctly track the write pointer offset of zones. These commands
+	 * are not plugged as we do not need serialization with write
+	 * operations. It is the responsibility of the user to not issue reset
+	 * and finish commands when write operations are in flight.
+	 */
+	switch (bio_op(bio)) {
+	case REQ_OP_WRITE:
+	case REQ_OP_WRITE_ZEROES:
+		return blk_zone_wplug_handle_write(bio, nr_segs);
+	case REQ_OP_ZONE_RESET:
+		return blk_zone_wplug_handle_reset_or_finish(bio, 0);
+	case REQ_OP_ZONE_FINISH:
+		return blk_zone_wplug_handle_reset_or_finish(bio,
+						bdev_zone_sectors(bdev));
+	case REQ_OP_ZONE_RESET_ALL:
+		return blk_zone_wplug_handle_reset_all(bio);
+	default:
+		return false;
+	}
+
+	return false;
+}
+EXPORT_SYMBOL_GPL(blk_zone_plug_bio);
+
+static void disk_zone_wplug_unplug_bio(struct gendisk *disk,
+				       struct blk_zone_wplug *zwplug)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&zwplug->lock, flags);
+
+	/*
+	 * If we had an error, schedule error recovery. The recovery work
+	 * will restart submission of plugged BIOs.
+	 */
+	if (zwplug->flags & BLK_ZONE_WPLUG_ERROR) {
+		spin_unlock_irqrestore(&zwplug->lock, flags);
+		kblockd_schedule_work(&disk->zone_wplugs_work);
+		return;
+	}
+
+	/* Schedule submission of the next plugged BIO if we have one. */
+	if (!bio_list_empty(&zwplug->bio_list)) {
+		spin_unlock_irqrestore(&zwplug->lock, flags);
+		kblockd_schedule_work(&zwplug->bio_work);
+		return;
+	}
+
+	zwplug->flags &= ~BLK_ZONE_WPLUG_PLUGGED;
+
+	/*
+	 * If the zone is full (it was fully written or finished, or empty
+	 * (it was reset), remove its zone write plug from the hash table.
+	 */
+	if (disk_should_remove_zone_wplug(disk, zwplug))
+		disk_remove_zone_wplug(disk, zwplug);
+
+	spin_unlock_irqrestore(&zwplug->lock, flags);
+}
+
+void blk_zone_write_plug_bio_endio(struct bio *bio)
+{
+	struct gendisk *disk = bio->bi_bdev->bd_disk;
+	struct blk_zone_wplug *zwplug =
+		disk_get_zone_wplug(bio->bi_bdev->bd_disk,
+				    bio->bi_iter.bi_sector);
+	unsigned long flags;
+
+	if (WARN_ON_ONCE(!zwplug))
+		return;
+
+	/* Make sure we do not see this BIO again by clearing the plug flag. */
+	bio_clear_flag(bio, BIO_ZONE_WRITE_PLUGGING);
+
+	/*
+	 * If the BIO failed, mark the plug as having an error to trigger
+	 * recovery.
+	 */
+	if (bio->bi_status != BLK_STS_OK) {
+		spin_lock_irqsave(&zwplug->lock, flags);
+		disk_zone_wplug_set_error(disk, zwplug);
+		spin_unlock_irqrestore(&zwplug->lock, flags);
+	}
+
+	/*
+	 * For BIO-based devices, blk_zone_write_plug_complete_request()
+	 * is not called. So we need to schedule execution of the next
+	 * plugged BIO here.
+	 */
+	if (bio->bi_bdev->bd_has_submit_bio)
+		disk_zone_wplug_unplug_bio(disk, zwplug);
+
+	/* Drop the reference we took when the BIO was issued. */
+	atomic_dec(&zwplug->ref);
+	disk_put_zone_wplug(zwplug);
+}
+
+void blk_zone_write_plug_complete_request(struct request *req)
+{
+	struct gendisk *disk = req->q->disk;
+	struct blk_zone_wplug *zwplug = disk_get_zone_wplug(disk, req->__sector);
+
+	if (WARN_ON_ONCE(!zwplug))
+		return;
+
+	req->rq_flags &= ~RQF_ZONE_WRITE_PLUGGING;
+
+	disk_zone_wplug_unplug_bio(disk, zwplug);
+
+	/*
+	 * Drop the reference we took when the request was initialized in
+	 * blk_zone_write_plug_attempt_merge().
+	 */
+	atomic_dec(&zwplug->ref);
+	disk_put_zone_wplug(zwplug);
+}
+
+static void blk_zone_wplug_bio_work(struct work_struct *work)
+{
+	struct blk_zone_wplug *zwplug =
+		container_of(work, struct blk_zone_wplug, bio_work);
+	struct block_device *bdev;
+	unsigned long flags;
+	struct bio *bio;
+
+	/*
+	 * Submit the next plugged BIO. If we do not have any, clear
+	 * the plugged flag.
+	 */
+	spin_lock_irqsave(&zwplug->lock, flags);
+
+	bio = bio_list_pop(&zwplug->bio_list);
+	if (!bio) {
+		zwplug->flags &= ~BLK_ZONE_WPLUG_PLUGGED;
+		spin_unlock_irqrestore(&zwplug->lock, flags);
+		return;
+	}
+
+	if (!blk_zone_wplug_prepare_bio(zwplug, bio)) {
+		/* Error recovery will decide what to do with the BIO. */
+		bio_list_add_head(&zwplug->bio_list, bio);
+		spin_unlock_irqrestore(&zwplug->lock, flags);
+		return;
+	}
+
+	spin_unlock_irqrestore(&zwplug->lock, flags);
+
+	bdev = bio->bi_bdev;
+	submit_bio_noacct_nocheck(bio);
+
+	/*
+	 * blk-mq devices will reuse the extra reference on the request queue
+	 * usage counter we took when the BIO was plugged, but the submission
+	 * path for BIO-based devices will not do that. So drop this extra
+	 * reference here.
+	 */
+	if (bdev->bd_has_submit_bio)
+		blk_queue_exit(bdev->bd_disk->queue);
+}
+
+static unsigned int blk_zone_wp_offset(struct blk_zone *zone)
+{
+	switch (zone->cond) {
+	case BLK_ZONE_COND_IMP_OPEN:
+	case BLK_ZONE_COND_EXP_OPEN:
+	case BLK_ZONE_COND_CLOSED:
+		return zone->wp - zone->start;
+	case BLK_ZONE_COND_FULL:
+		return zone->len;
+	case BLK_ZONE_COND_EMPTY:
+		return 0;
+	case BLK_ZONE_COND_NOT_WP:
+	case BLK_ZONE_COND_OFFLINE:
+	case BLK_ZONE_COND_READONLY:
+	default:
+		/*
+		 * Conventional, offline and read-only zones do not have a valid
+		 * write pointer.
+		 */
+		return UINT_MAX;
+	}
+}
+
+static int blk_zone_wplug_report_zone_cb(struct blk_zone *zone,
+					 unsigned int idx, void *data)
+{
+	struct blk_zone *zonep = data;
+
+	*zonep = *zone;
+	return 0;
+}
+
+static void disk_zone_wplug_handle_error(struct gendisk *disk,
+					 struct blk_zone_wplug *zwplug)
+{
+	sector_t zone_start_sector =
+		bdev_zone_sectors(disk->part0) * zwplug->zone_no;
+	unsigned int noio_flag;
+	struct blk_zone zone;
+	unsigned long flags;
+	int ret;
+
+	/* Get the current zone information from the device. */
+	noio_flag = memalloc_noio_save();
+	ret = disk->fops->report_zones(disk, zone_start_sector, 1,
+				       blk_zone_wplug_report_zone_cb, &zone);
+	memalloc_noio_restore(noio_flag);
+
+	spin_lock_irqsave(&zwplug->lock, flags);
+
+	/*
+	 * A zone reset or finish may have cleared the error already. In such
+	 * case, do nothing as the report zones may have seen the "old" write
+	 * pointer value before the reset/finish operation completed.
+	 */
+	if (!(zwplug->flags & BLK_ZONE_WPLUG_ERROR))
+		goto unlock;
+
+	zwplug->flags &= ~BLK_ZONE_WPLUG_ERROR;
+
+	if (ret != 1) {
+		/*
+		 * We failed to get the zone information, meaning that something
+		 * is likely really wrong with the device. Abort all remaining
+		 * plugged BIOs as otherwise we could endup waiting forever on
+		 * plugged BIOs to complete if there is a queue freeze on-going.
+		 */
+		disk_zone_wplug_abort(zwplug);
+		goto unplug;
+	}
+
+	/* Update the zone write pointer offset. */
+	zwplug->wp_offset = blk_zone_wp_offset(&zone);
+	disk_zone_wplug_abort_unaligned(disk, zwplug);
+
+	/* Restart BIO submission if we still have any BIO left. */
+	if (!bio_list_empty(&zwplug->bio_list)) {
+		WARN_ON_ONCE(!(zwplug->flags & BLK_ZONE_WPLUG_PLUGGED));
+		kblockd_schedule_work(&zwplug->bio_work);
+		goto unlock;
+	}
+
+unplug:
+	zwplug->flags &= ~BLK_ZONE_WPLUG_PLUGGED;
+	if (disk_should_remove_zone_wplug(disk, zwplug))
+		disk_remove_zone_wplug(disk, zwplug);
+
+unlock:
+	spin_unlock_irqrestore(&zwplug->lock, flags);
+}
+
+static void disk_zone_wplugs_work(struct work_struct *work)
+{
+	struct gendisk *disk =
+		container_of(work, struct gendisk, zone_wplugs_work);
+	struct blk_zone_wplug *zwplug;
+	unsigned long flags;
+
+	spin_lock_irqsave(&disk->zone_wplugs_lock, flags);
+
+	while (!list_empty(&disk->zone_wplugs_err_list)) {
+		zwplug = list_first_entry(&disk->zone_wplugs_err_list,
+					  struct blk_zone_wplug, link);
+		list_del_init(&zwplug->link);
+		spin_unlock_irqrestore(&disk->zone_wplugs_lock, flags);
+
+		disk_zone_wplug_handle_error(disk, zwplug);
+		disk_put_zone_wplug(zwplug);
+
+		spin_lock_irqsave(&disk->zone_wplugs_lock, flags);
+	}
+
+	spin_unlock_irqrestore(&disk->zone_wplugs_lock, flags);
+}
+
+static inline unsigned int disk_zone_wplugs_hash_size(struct gendisk *disk)
+{
+	return 1U << disk->zone_wplugs_hash_bits;
+}
+
+void disk_init_zone_resources(struct gendisk *disk)
+{
+	spin_lock_init(&disk->zone_wplugs_lock);
+	INIT_LIST_HEAD(&disk->zone_wplugs_err_list);
+	INIT_WORK(&disk->zone_wplugs_work, disk_zone_wplugs_work);
+}
+
+/*
+ * For the size of a disk zone write plug hash table, use the size of the
+ * zone write plug mempool, which is the maximum of the disk open zones and
+ * active zones limits. But do not exceed 4KB (512 hlist head entries), that is,
+ * 9 bits. For a disk that has no limits, mempool size defaults to 128.
+ */
+#define BLK_ZONE_WPLUG_MAX_HASH_BITS		9
+#define BLK_ZONE_WPLUG_DEFAULT_POOL_SIZE	128
+
+static int disk_alloc_zone_resources(struct gendisk *disk,
+				     unsigned int pool_size)
+{
+	unsigned int i;
+
+	disk->zone_wplugs_hash_bits =
+		min(ilog2(pool_size) + 1, BLK_ZONE_WPLUG_MAX_HASH_BITS);
+
+	disk->zone_wplugs_hash =
+		kcalloc(disk_zone_wplugs_hash_size(disk),
+			sizeof(struct hlist_head), GFP_KERNEL);
+	if (!disk->zone_wplugs_hash)
+		return -ENOMEM;
+
+	for (i = 0; i < disk_zone_wplugs_hash_size(disk); i++)
+		INIT_HLIST_HEAD(&disk->zone_wplugs_hash[i]);
+
+	disk->zone_wplugs_pool = mempool_create_kmalloc_pool(pool_size,
+						sizeof(struct blk_zone_wplug));
+	if (!disk->zone_wplugs_pool) {
+		kfree(disk->zone_wplugs_hash);
+		disk->zone_wplugs_hash = NULL;
+		disk->zone_wplugs_hash_bits = 0;
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void disk_destroy_zone_wplugs_hash_table(struct gendisk *disk)
+{
+	struct blk_zone_wplug *zwplug;
+	unsigned int i;
+
+	if (!disk->zone_wplugs_hash)
+		return;
+
+	/* Free all the zone write plugs we have. */
+	for (i = 0; i < disk_zone_wplugs_hash_size(disk); i++) {
+		while (!hlist_empty(&disk->zone_wplugs_hash[i])) {
+			zwplug = hlist_entry(disk->zone_wplugs_hash[i].first,
+					     struct blk_zone_wplug, node);
+			atomic_inc(&zwplug->ref);
+			disk_remove_zone_wplug(disk, zwplug);
+			disk_put_zone_wplug(zwplug);
+		}
+	}
+
+	kfree(disk->zone_wplugs_hash);
+	disk->zone_wplugs_hash = NULL;
+	disk->zone_wplugs_hash_bits = 0;
+}
+
+void disk_free_zone_resources(struct gendisk *disk)
+{
+	cancel_work_sync(&disk->zone_wplugs_work);
+
+	disk_destroy_zone_wplugs_hash_table(disk);
+
+	/*
+	 * Wait for the zone write plugs to be RCU-freed before
+	 * destorying the mempool.
+	 */
+	rcu_barrier();
+
+	mempool_destroy(disk->zone_wplugs_pool);
+	disk->zone_wplugs_pool = NULL;
+
 	kfree(disk->conv_zones_bitmap);
 	disk->conv_zones_bitmap = NULL;
 	kfree(disk->seq_zones_wlock);
 	disk->seq_zones_wlock = NULL;
+
+	disk->zone_capacity = 0;
+	disk->nr_zones = 0;
+}
+
+static int disk_revalidate_zone_resources(struct gendisk *disk,
+					  unsigned int nr_zones)
+{
+	struct queue_limits *lim = &disk->queue->limits;
+	unsigned int pool_size;
+
+	/*
+	 * If the device has no limit on the maximum number of open and active
+	 * zones, use BLK_ZONE_WPLUG_DEFAULT_POOL_SIZE.
+	 */
+	pool_size = max(lim->max_open_zones, lim->max_active_zones);
+	if (!pool_size)
+		pool_size = min(BLK_ZONE_WPLUG_DEFAULT_POOL_SIZE, nr_zones);
+
+	if (!disk->zone_wplugs_hash)
+		return disk_alloc_zone_resources(disk, pool_size);
+
+	/* Resize the zone write plug memory pool if needed. */
+	if (disk->zone_wplugs_pool->min_nr != pool_size)
+		return mempool_resize(disk->zone_wplugs_pool, pool_size);
+
+	return 0;
 }
 
 struct blk_revalidate_zone_args {
@@ -453,6 +1514,9 @@ static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
 	struct request_queue *q = disk->queue;
 	sector_t capacity = get_capacity(disk);
 	sector_t zone_sectors = q->limits.chunk_sectors;
+	struct blk_zone_wplug *zwplug;
+	unsigned long flags;
+	unsigned int wp_offset;
 
 	/* Check for bad zones and holes in the zone report */
 	if (zone->start != args->sector) {
@@ -524,6 +1588,22 @@ static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
 				disk->disk_name);
 			return -ENODEV;
 		}
+
+		/*
+		 * We need to track the write pointer of all zones that are not
+		 * empty nor full. So make sure we have a zone write plug for
+		 * such zone.
+		 */
+		wp_offset = blk_zone_wp_offset(zone);
+		if (wp_offset && wp_offset < zone_sectors) {
+			zwplug = disk_get_and_lock_zone_wplug(disk, zone->start,
+							      GFP_NOIO, &flags);
+			if (!zwplug)
+				return -ENOMEM;
+			spin_unlock_irqrestore(&zwplug->lock, flags);
+			disk_put_zone_wplug(zwplug);
+		}
+
 		break;
 	case BLK_ZONE_TYPE_SEQWRITE_PREF:
 	default:
@@ -560,7 +1640,7 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
 	sector_t capacity = get_capacity(disk);
 	struct blk_revalidate_zone_args args = { };
 	unsigned int noio_flag;
-	int ret;
+	int ret = -ENOMEM;
 
 	if (WARN_ON_ONCE(!blk_queue_is_zoned(q)))
 		return -EIO;
@@ -593,6 +1673,11 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
 	args.disk = disk;
 	args.nr_zones = (capacity + zone_sectors - 1) >> ilog2(zone_sectors);
 	noio_flag = memalloc_noio_save();
+	ret = disk_revalidate_zone_resources(disk, args.nr_zones);
+	if (ret) {
+		memalloc_noio_restore(noio_flag);
+		return ret;
+	}
 	ret = disk->fops->report_zones(disk, 0, UINT_MAX,
 				       blk_revalidate_zone_cb, &args);
 	if (!ret) {
@@ -627,7 +1712,7 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
 		ret = 0;
 	} else {
 		pr_warn("%s: failed to revalidate zones\n", disk->disk_name);
-		disk_free_zone_bitmaps(disk);
+		disk_free_zone_resources(disk);
 	}
 	blk_mq_unfreeze_queue(q);
 
diff --git a/block/blk.h b/block/blk.h
index bca50a9510c8..4df969f8fa28 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -415,7 +415,14 @@ static inline struct bio *blk_queue_bounce(struct bio *bio,
 }
 
 #ifdef CONFIG_BLK_DEV_ZONED
-void disk_free_zone_bitmaps(struct gendisk *disk);
+void disk_init_zone_resources(struct gendisk *disk);
+void disk_free_zone_resources(struct gendisk *disk);
+static inline bool bio_zone_write_plugging(struct bio *bio)
+{
+	return bio_flagged(bio, BIO_ZONE_WRITE_PLUGGING);
+}
+void blk_zone_write_plug_bio_merged(struct bio *bio);
+void blk_zone_write_plug_attempt_merge(struct request *rq);
 static inline void blk_zone_update_request_bio(struct request *rq,
 					       struct bio *bio)
 {
@@ -423,22 +430,60 @@ static inline void blk_zone_update_request_bio(struct request *rq,
 	 * For zone append requests, the request sector indicates the location
 	 * at which the BIO data was written. Return this value to the BIO
 	 * issuer through the BIO iter sector.
+	 * For plugged zone writes, we need the original BIO sector so
+	 * that blk_zone_write_plug_bio_endio() can lookup the zone write plug.
 	 */
-	if (req_op(rq) == REQ_OP_ZONE_APPEND)
+	if (req_op(rq) == REQ_OP_ZONE_APPEND || bio_zone_write_plugging(bio))
 		bio->bi_iter.bi_sector = rq->__sector;
 }
+void blk_zone_write_plug_bio_endio(struct bio *bio);
+static inline void blk_zone_bio_endio(struct bio *bio)
+{
+	/*
+	 * For write BIOs to zoned devices, signal the completion of the BIO so
+	 * that the next write BIO can be submitted by zone write plugging.
+	 */
+	if (bio_zone_write_plugging(bio))
+		blk_zone_write_plug_bio_endio(bio);
+}
+
+void blk_zone_write_plug_complete_request(struct request *rq);
+static inline void blk_zone_complete_request(struct request *rq)
+{
+	if (rq->rq_flags & RQF_ZONE_WRITE_PLUGGING)
+		blk_zone_write_plug_complete_request(rq);
+}
 int blkdev_report_zones_ioctl(struct block_device *bdev, unsigned int cmd,
 		unsigned long arg);
 int blkdev_zone_mgmt_ioctl(struct block_device *bdev, blk_mode_t mode,
 		unsigned int cmd, unsigned long arg);
 #else /* CONFIG_BLK_DEV_ZONED */
-static inline void disk_free_zone_bitmaps(struct gendisk *disk)
+static inline void disk_init_zone_resources(struct gendisk *disk)
+{
+}
+static inline void disk_free_zone_resources(struct gendisk *disk)
+{
+}
+static inline bool bio_zone_write_plugging(struct bio *bio)
+{
+	return false;
+}
+static inline void blk_zone_write_plug_bio_merged(struct bio *bio)
+{
+}
+static inline void blk_zone_write_plug_attempt_merge(struct request *rq)
 {
 }
 static inline void blk_zone_update_request_bio(struct request *rq,
 					       struct bio *bio)
 {
 }
+static inline void blk_zone_bio_endio(struct bio *bio)
+{
+}
+static inline void blk_zone_complete_request(struct request *rq)
+{
+}
 static inline int blkdev_report_zones_ioctl(struct block_device *bdev,
 		unsigned int cmd, unsigned long arg)
 {
diff --git a/block/genhd.c b/block/genhd.c
index bb29a68e1d67..eb893df56d51 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -1182,7 +1182,7 @@ static void disk_release(struct device *dev)
 
 	disk_release_events(disk);
 	kfree(disk->random);
-	disk_free_zone_bitmaps(disk);
+	disk_free_zone_resources(disk);
 	xa_destroy(&disk->part_tbl);
 
 	disk->queue->disk = NULL;
@@ -1364,6 +1364,7 @@ struct gendisk *__alloc_disk_node(struct request_queue *q, int node_id,
 	if (blkcg_init_disk(disk))
 		goto out_erase_part0;
 
+	disk_init_zone_resources(disk);
 	rand_initialize_disk(disk);
 	disk_to_dev(disk)->class = &block_class;
 	disk_to_dev(disk)->type = &disk_type;
diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h
index d3d8fd8e229b..60090c8366fb 100644
--- a/include/linux/blk-mq.h
+++ b/include/linux/blk-mq.h
@@ -56,6 +56,8 @@ typedef __u32 __bitwise req_flags_t;
 #define RQF_SPECIAL_PAYLOAD	((__force req_flags_t)(1 << 18))
 /* The per-zone write lock is held for this request */
 #define RQF_ZONE_WRITE_LOCKED	((__force req_flags_t)(1 << 19))
+/* The request completion needs to be signaled to zone write pluging. */
+#define RQF_ZONE_WRITE_PLUGGING	((__force req_flags_t)(1 << 20))
 /* ->timeout has been called, don't expire again */
 #define RQF_TIMED_OUT		((__force req_flags_t)(1 << 21))
 #define RQF_RESV		((__force req_flags_t)(1 << 23))
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index cb1526ec44b5..ed45de07d2ef 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -234,7 +234,12 @@ struct bio {
 
 	struct bvec_iter	bi_iter;
 
-	blk_qc_t		bi_cookie;
+	union {
+		/* for polled bios: */
+		blk_qc_t		bi_cookie;
+		/* for plugged zoned writes only: */
+		unsigned int		__bi_nr_segments;
+	};
 	bio_end_io_t		*bi_end_io;
 	void			*bi_private;
 #ifdef CONFIG_BLK_CGROUP
@@ -305,6 +310,7 @@ enum {
 	BIO_QOS_MERGED,		/* but went through rq_qos merge path */
 	BIO_REMAPPED,
 	BIO_ZONE_WRITE_LOCKED,	/* Owns a zoned device zone write lock */
+	BIO_ZONE_WRITE_PLUGGING, /* bio handled through zone write plugging */
 	BIO_FLAG_LAST
 };
 
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 7f3d85d5486b..6c495aa8f1a1 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -194,6 +194,12 @@ struct gendisk {
 	unsigned int		zone_capacity;
 	unsigned long		*conv_zones_bitmap;
 	unsigned long		*seq_zones_wlock;
+	unsigned int            zone_wplugs_hash_bits;
+	spinlock_t              zone_wplugs_lock;
+	struct mempool_s	*zone_wplugs_pool;
+	struct hlist_head       *zone_wplugs_hash;
+	struct list_head        zone_wplugs_err_list;
+	struct work_struct	zone_wplugs_work;
 #endif /* CONFIG_BLK_DEV_ZONED */
 
 #if IS_ENABLED(CONFIG_CDROM)
@@ -663,6 +669,7 @@ static inline unsigned int bdev_max_active_zones(struct block_device *bdev)
 	return bdev->bd_disk->queue->limits.max_active_zones;
 }
 
+bool blk_zone_plug_bio(struct bio *bio, unsigned int nr_segs);
 #else /* CONFIG_BLK_DEV_ZONED */
 static inline unsigned int bdev_nr_zones(struct block_device *bdev)
 {
@@ -690,6 +697,10 @@ static inline unsigned int bdev_max_active_zones(struct block_device *bdev)
 {
 	return 0;
 }
+static inline bool blk_zone_plug_bio(struct bio *bio, unsigned int nr_segs)
+{
+	return false;
+}
 #endif /* CONFIG_BLK_DEV_ZONED */
 
 static inline unsigned int blk_queue_depth(struct request_queue *q)
-- 
2.44.0

[PATCH v7 08/28] block: Fake max open zones limit when there is no limit

[Damien Le Moal]

For a zoned block device that has no limit on the number of open zones
and no limit on the number of active zones, the zone write plug mempool
is created with a size of 128 zone write plugs. For such case, set the
device max_open_zones queue limit to this value to indicate to the user
the potential performance penalty that may happen when writing
simultaneously to more zones than the mempool size.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 block/blk-zoned.c | 41 +++++++++++++++++++++++++++++++++++------
 1 file changed, 35 insertions(+), 6 deletions(-)

diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index fefcebd70445..4b21a1ec00d4 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -1503,6 +1503,38 @@ struct blk_revalidate_zone_args {
 	sector_t	sector;
 };
 
+/*
+ * Update the disk zone resources information and device queue limits.
+ * The disk queue is frozen when this is executed.
+ */
+static int disk_update_zone_resources(struct gendisk *disk,
+				      struct blk_revalidate_zone_args *args)
+{
+	struct request_queue *q = disk->queue;
+	struct queue_limits lim;
+
+	disk->nr_zones = args->nr_zones;
+	disk->zone_capacity = args->zone_capacity;
+	swap(disk->seq_zones_wlock, args->seq_zones_wlock);
+	swap(disk->conv_zones_bitmap, args->conv_zones_bitmap);
+
+	/*
+	 * If the device has no limit on the maximum number of open and active
+	 * zones, set its max open zone limit to the mempool size to indicate
+	 * to the user that there is a potential performance impact due to
+	 * dynamic zone write plug allocation when simultaneously writing to
+	 * more zones than the size of the mempool.
+	 */
+	if (disk->zone_wplugs_pool) {
+		lim = queue_limits_start_update(q);
+		if (!lim.max_open_zones && !lim.max_active_zones)
+			lim.max_open_zones = disk->zone_wplugs_pool->min_nr;
+		return queue_limits_commit_update(q, &lim);
+	}
+
+	return 0;
+}
+
 /*
  * Helper function to check the validity of zones of a zoned block device.
  */
@@ -1703,17 +1735,14 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
 	 */
 	blk_mq_freeze_queue(q);
 	if (ret > 0) {
-		disk->nr_zones = args.nr_zones;
-		disk->zone_capacity = args.zone_capacity;
-		swap(disk->seq_zones_wlock, args.seq_zones_wlock);
-		swap(disk->conv_zones_bitmap, args.conv_zones_bitmap);
+		ret = disk_update_zone_resources(disk, &args);
 		if (update_driver_data)
 			update_driver_data(disk);
-		ret = 0;
 	} else {
 		pr_warn("%s: failed to revalidate zones\n", disk->disk_name);
-		disk_free_zone_resources(disk);
 	}
+	if (ret)
+		disk_free_zone_resources(disk);
 	blk_mq_unfreeze_queue(q);
 
 	kfree(args.seq_zones_wlock);
-- 
2.44.0

[PATCH v7 09/28] block: Allow zero value of max_zone_append_sectors queue limit

[Damien Le Moal]

In preparation for adding a generic zone append emulation using zone
write plugging, allow device drivers supporting zoned block device to
set a the max_zone_append_sectors queue limit of a device to 0 to
indicate the lack of native support for zone append operations and that
the block layer should emulate these operations using regular write
operations.

blk_queue_max_zone_append_sectors() is modified to allow passing 0 as
the max_zone_append_sectors argument. The function
queue_max_zone_append_sectors() is also modified to ensure that the
minimum of the max_hw_sectors and chunk_sectors limit is used whenever
the max_zone_append_sectors limit is 0. This minimum is consistent with
the value set for the max_zone_append_sectors limit by the function
blk_validate_zoned_limits() when limits for a queue are validated.

The helper functions queue_emulates_zone_append() and
bdev_emulates_zone_append() are added to test if a queue (or block
device) emulates zone append operations.

In order for blk_revalidate_disk_zones() to accept zoned block devices
relying on zone append emulation, the direct check to the
max_zone_append_sectors queue limit of the disk is replaced by a check
using the value returned by queue_max_zone_append_sectors(). Similarly,
queue_zone_append_max_show() is modified to use the same accessor so
that the sysfs attribute advertizes the non-zero limit that will be
used, regardless if it is for native or emulated commands.

For stacking drivers, a top device should not need to care if the
underlying devices have native or emulated zone append operations.
blk_stack_limits() is thus modified to set the top device
max_zone_append_sectors limit using the new accessor
queue_limits_max_zone_append_sectors(). queue_max_zone_append_sectors()
is modified to use this function as well. Stacking drivers that require
zone append emulation, e.g. dm-crypt, can still request this feature by
calling blk_queue_max_zone_append_sectors() with a 0 limit.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 block/blk-core.c       |  2 +-
 block/blk-settings.c   | 30 +++++++++++++++++++-----------
 block/blk-sysfs.c      |  2 +-
 block/blk-zoned.c      |  2 +-
 include/linux/blkdev.h | 23 ++++++++++++++++++++---
 5 files changed, 42 insertions(+), 17 deletions(-)

diff --git a/block/blk-core.c b/block/blk-core.c
index a16b5abdbbf5..3bf28149e104 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -602,7 +602,7 @@ static inline blk_status_t blk_check_zone_append(struct request_queue *q,
 		return BLK_STS_IOERR;
 
 	/* Make sure the BIO is small enough and will not get split */
-	if (nr_sectors > q->limits.max_zone_append_sectors)
+	if (nr_sectors > queue_max_zone_append_sectors(q))
 		return BLK_STS_IOERR;
 
 	bio->bi_opf |= REQ_NOMERGE;
diff --git a/block/blk-settings.c b/block/blk-settings.c
index cdbaef159c4b..c0197e1e7485 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -412,24 +412,32 @@ EXPORT_SYMBOL(blk_queue_max_write_zeroes_sectors);
  * blk_queue_max_zone_append_sectors - set max sectors for a single zone append
  * @q:  the request queue for the device
  * @max_zone_append_sectors: maximum number of sectors to write per command
+ *
+ * Sets the maximum number of sectors allowed for zone append commands. If
+ * Specifying 0 for @max_zone_append_sectors indicates that the queue does
+ * not natively support zone append operations and that the block layer must
+ * emulate these operations using regular writes.
  **/
 void blk_queue_max_zone_append_sectors(struct request_queue *q,
 		unsigned int max_zone_append_sectors)
 {
-	unsigned int max_sectors;
+	unsigned int max_sectors = 0;
 
 	if (WARN_ON(!blk_queue_is_zoned(q)))
 		return;
 
-	max_sectors = min(q->limits.max_hw_sectors, max_zone_append_sectors);
-	max_sectors = min(q->limits.chunk_sectors, max_sectors);
+	if (max_zone_append_sectors) {
+		max_sectors = min(q->limits.max_hw_sectors,
+				  max_zone_append_sectors);
+		max_sectors = min(q->limits.chunk_sectors, max_sectors);
 
-	/*
-	 * Signal eventual driver bugs resulting in the max_zone_append sectors limit
-	 * being 0 due to a 0 argument, the chunk_sectors limit (zone size) not set,
-	 * or the max_hw_sectors limit not set.
-	 */
-	WARN_ON(!max_sectors);
+		/*
+		 * Signal eventual driver bugs resulting in the max_zone_append
+		 * sectors limit being 0 due to the chunk_sectors limit (zone
+		 * size) not set or the max_hw_sectors limit not set.
+		 */
+		WARN_ON_ONCE(!max_sectors);
+	}
 
 	q->limits.max_zone_append_sectors = max_sectors;
 }
@@ -756,8 +764,8 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 	t->max_dev_sectors = min_not_zero(t->max_dev_sectors, b->max_dev_sectors);
 	t->max_write_zeroes_sectors = min(t->max_write_zeroes_sectors,
 					b->max_write_zeroes_sectors);
-	t->max_zone_append_sectors = min(t->max_zone_append_sectors,
-					b->max_zone_append_sectors);
+	t->max_zone_append_sectors = min(queue_limits_max_zone_append_sectors(t),
+					 queue_limits_max_zone_append_sectors(b));
 	t->bounce = max(t->bounce, b->bounce);
 
 	t->seg_boundary_mask = min_not_zero(t->seg_boundary_mask,
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 8c8f69d8ba48..e3ed5a921aff 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -224,7 +224,7 @@ static ssize_t queue_zone_write_granularity_show(struct request_queue *q,
 
 static ssize_t queue_zone_append_max_show(struct request_queue *q, char *page)
 {
-	unsigned long long max_sectors = q->limits.max_zone_append_sectors;
+	unsigned long long max_sectors = queue_max_zone_append_sectors(q);
 
 	return sprintf(page, "%llu\n", max_sectors << SECTOR_SHIFT);
 }
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index 4b21a1ec00d4..fcc1284b7c19 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -1692,7 +1692,7 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
 		return -ENODEV;
 	}
 
-	if (!q->limits.max_zone_append_sectors) {
+	if (!queue_max_zone_append_sectors(q)) {
 		pr_warn("%s: Invalid 0 maximum zone append limit\n",
 			disk->disk_name);
 		return -ENODEV;
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 6c495aa8f1a1..0b69027e1713 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1173,12 +1173,29 @@ static inline unsigned int queue_max_segment_size(const struct request_queue *q)
 	return q->limits.max_segment_size;
 }
 
-static inline unsigned int queue_max_zone_append_sectors(const struct request_queue *q)
+static inline unsigned int queue_limits_max_zone_append_sectors(struct queue_limits *l)
 {
+	unsigned int max_sectors = min(l->chunk_sectors, l->max_hw_sectors);
 
-	const struct queue_limits *l = &q->limits;
+	return min_not_zero(l->max_zone_append_sectors, max_sectors);
+}
+
+static inline unsigned int queue_max_zone_append_sectors(struct request_queue *q)
+{
+	if (!blk_queue_is_zoned(q))
+		return 0;
 
-	return min(l->max_zone_append_sectors, l->max_sectors);
+	return queue_limits_max_zone_append_sectors(&q->limits);
+}
+
+static inline bool queue_emulates_zone_append(struct request_queue *q)
+{
+	return blk_queue_is_zoned(q) && !q->limits.max_zone_append_sectors;
+}
+
+static inline bool bdev_emulates_zone_append(struct block_device *bdev)
+{
+	return queue_emulates_zone_append(bdev_get_queue(bdev));
 }
 
 static inline unsigned int
-- 
2.44.0

[PATCH v7 10/28] block: Implement zone append emulation

[Damien Le Moal]

Given that zone write plugging manages all writes to zones of a zoned
block device and tracks the write pointer position of all zones that are
not full nor empty, emulating zone append operations using regular
writes can be implemented generically, without relying on the underlying
device driver to implement such emulation. This is needed for devices
that do not natively support the zone append command (e.g. SMR
hard-disks).

A device may request zone append emulation by setting its
max_zone_append_sectors queue limit to 0. For such device, the function
blk_zone_wplug_prepare_bio() changes zone append BIOs into
non-mergeable regular write BIOs. Modified zone append BIOs are flagged
with the new BIO flag BIO_EMULATES_ZONE_APPEND. This flag is checked
on completion of the BIO in blk_zone_write_plug_bio_endio() to restore
the original REQ_OP_ZONE_APPEND operation code of the BIO.

The block layer internal inline helper function bio_is_zone_append() is
added to test if a BIO is either a native zone append operation
(REQ_OP_ZONE_APPEND operation code) or if it is flagged with
BIO_EMULATES_ZONE_APPEND. Given that both native and emulated zone
append BIO completion handling should be similar, The functions
blk_update_request() and blk_zone_complete_request_bio() are modified to
use bio_is_zone_append() to execute blk_zone_update_request_bio() for
both native and emulated zone append operations.

This commit contains contributions from Christoph Hellwig <hch@lst.de>.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 block/blk-mq.c            |  3 +-
 block/blk-zoned.c         | 64 ++++++++++++++++++++++++++++++++-------
 block/blk.h               | 14 +++++++--
 include/linux/blk_types.h |  1 +
 4 files changed, 67 insertions(+), 15 deletions(-)

diff --git a/block/blk-mq.c b/block/blk-mq.c
index 48eb7dd049d1..6f9cc1c4d4fb 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -906,8 +906,7 @@ bool blk_update_request(struct request *req, blk_status_t error,
 
 		if (bio_bytes == bio->bi_iter.bi_size) {
 			req->bio = bio->bi_next;
-		} else if (req_op(req) == REQ_OP_ZONE_APPEND &&
-			   error == BLK_STS_OK) {
+		} else if (bio_is_zone_append(bio) && error == BLK_STS_OK) {
 			/*
 			 * Partial zone append completions cannot be supported
 			 * as the BIO fragments may end up not being written
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index fcc1284b7c19..a60ac5b3e637 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -689,7 +689,8 @@ static void disk_zone_wplug_abort_unaligned(struct gendisk *disk,
 
 	while ((bio = bio_list_pop(&zwplug->bio_list))) {
 		if (wp_offset >= zone_capacity ||
-		     bio_offset_from_zone_start(bio) != wp_offset) {
+		    (bio_op(bio) != REQ_OP_ZONE_APPEND &&
+		     bio_offset_from_zone_start(bio) != wp_offset)) {
 			blk_zone_wplug_bio_io_error(bio);
 			disk_put_zone_wplug(zwplug);
 			continue;
@@ -951,7 +952,8 @@ static inline void disk_zone_wplug_set_error(struct gendisk *disk,
 
 /*
  * Check and prepare a BIO for submission by incrementing the write pointer
- * offset of its zone write plug.
+ * offset of its zone write plug and changing zone append operations into
+ * regular write when zone append emulation is needed.
  */
 static bool blk_zone_wplug_prepare_bio(struct blk_zone_wplug *zwplug,
 				       struct bio *bio)
@@ -966,13 +968,30 @@ static bool blk_zone_wplug_prepare_bio(struct blk_zone_wplug *zwplug,
 	if (zwplug->wp_offset >= disk->zone_capacity)
 		goto err;
 
-	/*
-	 * Check for non-sequential writes early because we avoid a
-	 * whole lot of error handling trouble if we don't send it off
-	 * to the driver.
-	 */
-	if (bio_offset_from_zone_start(bio) != zwplug->wp_offset)
-		goto err;
+	if (bio_op(bio) == REQ_OP_ZONE_APPEND) {
+		/*
+		 * Use a regular write starting at the current write pointer.
+		 * Similarly to native zone append operations, do not allow
+		 * merging.
+		 */
+		bio->bi_opf &= ~REQ_OP_MASK;
+		bio->bi_opf |= REQ_OP_WRITE | REQ_NOMERGE;
+		bio->bi_iter.bi_sector += zwplug->wp_offset;
+
+		/*
+		 * Remember that this BIO is in fact a zone append operation
+		 * so that we can restore its operation code on completion.
+		 */
+		bio_set_flag(bio, BIO_EMULATES_ZONE_APPEND);
+	} else {
+		/*
+		 * Check for non-sequential writes early because we avoid a
+		 * whole lot of error handling trouble if we don't send it off
+		 * to the driver.
+		 */
+		if (bio_offset_from_zone_start(bio) != zwplug->wp_offset)
+			goto err;
+	}
 
 	/* Advance the zone write pointer offset. */
 	zwplug->wp_offset += bio_sectors(bio);
@@ -1008,8 +1027,14 @@ static bool blk_zone_wplug_handle_write(struct bio *bio, unsigned int nr_segs)
 	}
 
 	/* Conventional zones do not need write plugging. */
-	if (disk_zone_is_conv(disk, sector))
+	if (disk_zone_is_conv(disk, sector)) {
+		/* Zone append to conventional zones is not allowed. */
+		if (bio_op(bio) == REQ_OP_ZONE_APPEND) {
+			bio_io_error(bio);
+			return true;
+		}
 		return false;
+	}
 
 	if (bio->bi_opf & REQ_NOWAIT)
 		gfp_mask = GFP_NOWAIT;
@@ -1057,7 +1082,8 @@ static bool blk_zone_wplug_handle_write(struct bio *bio, unsigned int nr_segs)
  * @bio: The BIO being submitted
  * @nr_segs: The number of physical segments of @bio
  *
- * Handle write and write zeroes operations using zone write plugging.
+ * Handle write, write zeroes and zone append operations requiring emulation
+ * using zone write plugging.
  *
  * Return true whenever @bio execution needs to be delayed through the zone
  * write plug. Otherwise, return false to let the submission path process
@@ -1096,6 +1122,9 @@ bool blk_zone_plug_bio(struct bio *bio, unsigned int nr_segs)
 	 * machinery operates at the request level, below the plug, and
 	 * completion of the flush sequence will go through the regular BIO
 	 * completion, which will handle zone write plugging.
+	 * Zone append operations for devices that requested emulation must
+	 * also be plugged so that these BIOs can be changed into regular
+	 * write BIOs.
 	 * Zone reset, reset all and finish commands need special treatment
 	 * to correctly track the write pointer offset of zones. These commands
 	 * are not plugged as we do not need serialization with write
@@ -1103,6 +1132,10 @@ bool blk_zone_plug_bio(struct bio *bio, unsigned int nr_segs)
 	 * and finish commands when write operations are in flight.
 	 */
 	switch (bio_op(bio)) {
+	case REQ_OP_ZONE_APPEND:
+		if (!bdev_emulates_zone_append(bdev))
+			return false;
+		fallthrough;
 	case REQ_OP_WRITE:
 	case REQ_OP_WRITE_ZEROES:
 		return blk_zone_wplug_handle_write(bio, nr_segs);
@@ -1171,6 +1204,15 @@ void blk_zone_write_plug_bio_endio(struct bio *bio)
 	/* Make sure we do not see this BIO again by clearing the plug flag. */
 	bio_clear_flag(bio, BIO_ZONE_WRITE_PLUGGING);
 
+	/*
+	 * If this is a regular write emulating a zone append operation,
+	 * restore the original operation code.
+	 */
+	if (bio_flagged(bio, BIO_EMULATES_ZONE_APPEND)) {
+		bio->bi_opf &= ~REQ_OP_MASK;
+		bio->bi_opf |= REQ_OP_ZONE_APPEND;
+	}
+
 	/*
 	 * If the BIO failed, mark the plug as having an error to trigger
 	 * recovery.
diff --git a/block/blk.h b/block/blk.h
index 4df969f8fa28..1140c4a0be03 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -421,6 +421,11 @@ static inline bool bio_zone_write_plugging(struct bio *bio)
 {
 	return bio_flagged(bio, BIO_ZONE_WRITE_PLUGGING);
 }
+static inline bool bio_is_zone_append(struct bio *bio)
+{
+	return bio_op(bio) == REQ_OP_ZONE_APPEND ||
+		bio_flagged(bio, BIO_EMULATES_ZONE_APPEND);
+}
 void blk_zone_write_plug_bio_merged(struct bio *bio);
 void blk_zone_write_plug_attempt_merge(struct request *rq);
 static inline void blk_zone_update_request_bio(struct request *rq,
@@ -430,8 +435,9 @@ static inline void blk_zone_update_request_bio(struct request *rq,
 	 * For zone append requests, the request sector indicates the location
 	 * at which the BIO data was written. Return this value to the BIO
 	 * issuer through the BIO iter sector.
-	 * For plugged zone writes, we need the original BIO sector so
-	 * that blk_zone_write_plug_bio_endio() can lookup the zone write plug.
+	 * For plugged zone writes, which include emulated zone append, we need
+	 * the original BIO sector so that blk_zone_write_plug_bio_endio() can
+	 * lookup the zone write plug.
 	 */
 	if (req_op(rq) == REQ_OP_ZONE_APPEND || bio_zone_write_plugging(bio))
 		bio->bi_iter.bi_sector = rq->__sector;
@@ -468,6 +474,10 @@ static inline bool bio_zone_write_plugging(struct bio *bio)
 {
 	return false;
 }
+static inline bool bio_is_zone_append(struct bio *bio)
+{
+	return false;
+}
 static inline void blk_zone_write_plug_bio_merged(struct bio *bio)
 {
 }
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index ed45de07d2ef..29b3170431e7 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -311,6 +311,7 @@ enum {
 	BIO_REMAPPED,
 	BIO_ZONE_WRITE_LOCKED,	/* Owns a zoned device zone write lock */
 	BIO_ZONE_WRITE_PLUGGING, /* bio handled through zone write plugging */
+	BIO_EMULATES_ZONE_APPEND, /* bio emulates a zone append operation */
 	BIO_FLAG_LAST
 };
 
-- 
2.44.0

[PATCH v7 11/28] block: Allow BIO-based drivers to use blk_revalidate_disk_zones()

[Damien Le Moal]

In preparation for allowing BIO based device drivers to use zone write
plugging and its zone append emulation, allow these drivers to call
blk_revalidate_disk_zones() so that all zone resources necessary to zone
write plugging can be initialized.

To do so, remove the check in blk_revalidate_disk_zones() restricting
the use of this function to mq request-based drivers to allow also
BIO-based drivers to use it. This is safe to do as long as the
BIO-based block device queue is already setup and usable, as it should,
and can be safely frozen.

The helper function disk_need_zone_resources() is added to control the
allocation and initialization of the zone write plug hash table and
of the conventional zone bitmap only for mq devices and for BIO-based
devices that require zone append emulation.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 block/blk-zoned.c | 30 ++++++++++++++++++++++++------
 1 file changed, 24 insertions(+), 6 deletions(-)

diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index a60ac5b3e637..da0fc7e2d00a 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -1512,12 +1512,28 @@ void disk_free_zone_resources(struct gendisk *disk)
 	disk->nr_zones = 0;
 }
 
+static inline bool disk_need_zone_resources(struct gendisk *disk)
+{
+	/*
+	 * All mq zoned devices need zone resources so that the block layer
+	 * can automatically handle write BIO plugging. BIO-based device drivers
+	 * (e.g. DM devices) are normally responsible for handling zone write
+	 * ordering and do not need zone resources, unless the driver requires
+	 * zone append emulation.
+	 */
+	return queue_is_mq(disk->queue) ||
+		queue_emulates_zone_append(disk->queue);
+}
+
 static int disk_revalidate_zone_resources(struct gendisk *disk,
 					  unsigned int nr_zones)
 {
 	struct queue_limits *lim = &disk->queue->limits;
 	unsigned int pool_size;
 
+	if (!disk_need_zone_resources(disk))
+		return 0;
+
 	/*
 	 * If the device has no limit on the maximum number of open and active
 	 * zones, use BLK_ZONE_WPLUG_DEFAULT_POOL_SIZE.
@@ -1635,6 +1651,9 @@ static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
 				disk->disk_name);
 			return -ENODEV;
 		}
+
+		if (!disk_need_zone_resources(disk))
+			break;
 		if (!args->conv_zones_bitmap) {
 			args->conv_zones_bitmap =
 				blk_alloc_zone_bitmap(q->node, args->nr_zones);
@@ -1666,10 +1685,11 @@ static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
 		/*
 		 * We need to track the write pointer of all zones that are not
 		 * empty nor full. So make sure we have a zone write plug for
-		 * such zone.
+		 * such zone if the device has a zone write plug hash table.
 		 */
 		wp_offset = blk_zone_wp_offset(zone);
-		if (wp_offset && wp_offset < zone_sectors) {
+		if (disk->zone_wplugs_hash &&
+		    wp_offset && wp_offset < zone_sectors) {
 			zwplug = disk_get_and_lock_zone_wplug(disk, zone->start,
 							      GFP_NOIO, &flags);
 			if (!zwplug)
@@ -1700,8 +1720,8 @@ static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
  * be called within the disk ->revalidate method for blk-mq based drivers.
  * Before calling this function, the device driver must already have set the
  * device zone size (chunk_sector limit) and the max zone append limit.
- * For BIO based drivers, this function cannot be used. BIO based device drivers
- * only need to set disk->nr_zones so that the sysfs exposed value is correct.
+ * BIO based drivers can also use this function as long as the device queue
+ * can be safely frozen.
  * If the @update_driver_data callback function is not NULL, the callback is
  * executed with the device request queue frozen after all zones have been
  * checked.
@@ -1718,8 +1738,6 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
 
 	if (WARN_ON_ONCE(!blk_queue_is_zoned(q)))
 		return -EIO;
-	if (WARN_ON_ONCE(!queue_is_mq(q)))
-		return -EIO;
 
 	if (!capacity)
 		return -ENODEV;
-- 
2.44.0

[PATCH v7 12/28] dm: Use the block layer zone append emulation

[Damien Le Moal]

For targets requiring zone append operation emulation with regular
writes (e.g. dm-crypt), we can use the block layer emulation provided by
zone write plugging. Remove DM implemented zone append emulation and
enable the block layer one.

This is done by setting the max_zone_append_sectors limit of the
mapped device queue to 0 for mapped devices that have a target table
that cannot support native zone append operations (e.g. dm-crypt).
Such mapped devices are flagged with the DMF_EMULATE_ZONE_APPEND flag.
dm_split_and_process_bio() is modified to execute
blk_zone_write_plug_bio() for such device to let the block layer
transform zone append operations into regular writes.  This is done
after ensuring that the submitted BIO is split if it straddles zone
boundaries. Both changes are implemented unsing the inline helpers
dm_zone_write_plug_bio() and dm_zone_bio_needs_split() respectively.

dm_revalidate_zones() is also modified to use the block layer provided
function blk_revalidate_disk_zones() so that all zone resources needed
for zone append emulation are initialized by the block layer without DM
core needing to do anything. Since the device table is not yet live when
dm_revalidate_zones() is executed, enabling the use of
blk_revalidate_disk_zones() requires adding a pointer to the device
table in struct mapped_device. This avoids errors in
dm_blk_report_zones() trying to get the table with dm_get_live_table().
The mapped device table pointer is set to the table passed as argument
to dm_revalidate_zones() before calling blk_revalidate_disk_zones() and
reset to NULL after this function returns to restore the live table
handling for user call of report zones.

All the code related to zone append emulation is removed from
dm-zone.c. This leads to simplifications of the functions __map_bio()
and dm_zone_endio(). This later function now only needs to deal with
completions of real zone append operations for targets that support it.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 drivers/md/dm-core.h |   2 +-
 drivers/md/dm-zone.c | 476 ++++---------------------------------------
 drivers/md/dm.c      |  72 ++++---
 drivers/md/dm.h      |   2 -
 4 files changed, 93 insertions(+), 459 deletions(-)

diff --git a/drivers/md/dm-core.h b/drivers/md/dm-core.h
index e6757a30dcca..08700bfc3e23 100644
--- a/drivers/md/dm-core.h
+++ b/drivers/md/dm-core.h
@@ -140,7 +140,7 @@ struct mapped_device {
 
 #ifdef CONFIG_BLK_DEV_ZONED
 	unsigned int nr_zones;
-	unsigned int *zwp_offset;
+	void *zone_revalidate_map;
 #endif
 
 #ifdef CONFIG_IMA
diff --git a/drivers/md/dm-zone.c b/drivers/md/dm-zone.c
index eb9832b22b14..34769f3e3175 100644
--- a/drivers/md/dm-zone.c
+++ b/drivers/md/dm-zone.c
@@ -60,16 +60,23 @@ int dm_blk_report_zones(struct gendisk *disk, sector_t sector,
 	struct dm_table *map;
 	int srcu_idx, ret;
 
-	if (dm_suspended_md(md))
-		return -EAGAIN;
+	if (!md->zone_revalidate_map) {
+		/* Regular user context */
+		if (dm_suspended_md(md))
+			return -EAGAIN;
 
-	map = dm_get_live_table(md, &srcu_idx);
-	if (!map)
-		return -EIO;
+		map = dm_get_live_table(md, &srcu_idx);
+		if (!map)
+			return -EIO;
+	} else {
+		/* Zone revalidation during __bind() */
+		map = md->zone_revalidate_map;
+	}
 
 	ret = dm_blk_do_report_zones(md, map, sector, nr_zones, cb, data);
 
-	dm_put_live_table(md, srcu_idx);
+	if (!md->zone_revalidate_map)
+		dm_put_live_table(md, srcu_idx);
 
 	return ret;
 }
@@ -138,85 +145,6 @@ bool dm_is_zone_write(struct mapped_device *md, struct bio *bio)
 	}
 }
 
-void dm_cleanup_zoned_dev(struct mapped_device *md)
-{
-	if (md->disk) {
-		bitmap_free(md->disk->conv_zones_bitmap);
-		md->disk->conv_zones_bitmap = NULL;
-		bitmap_free(md->disk->seq_zones_wlock);
-		md->disk->seq_zones_wlock = NULL;
-	}
-
-	kvfree(md->zwp_offset);
-	md->zwp_offset = NULL;
-	md->nr_zones = 0;
-}
-
-static unsigned int dm_get_zone_wp_offset(struct blk_zone *zone)
-{
-	switch (zone->cond) {
-	case BLK_ZONE_COND_IMP_OPEN:
-	case BLK_ZONE_COND_EXP_OPEN:
-	case BLK_ZONE_COND_CLOSED:
-		return zone->wp - zone->start;
-	case BLK_ZONE_COND_FULL:
-		return zone->len;
-	case BLK_ZONE_COND_EMPTY:
-	case BLK_ZONE_COND_NOT_WP:
-	case BLK_ZONE_COND_OFFLINE:
-	case BLK_ZONE_COND_READONLY:
-	default:
-		/*
-		 * Conventional, offline and read-only zones do not have a valid
-		 * write pointer. Use 0 as for an empty zone.
-		 */
-		return 0;
-	}
-}
-
-static int dm_zone_revalidate_cb(struct blk_zone *zone, unsigned int idx,
-				 void *data)
-{
-	struct mapped_device *md = data;
-	struct gendisk *disk = md->disk;
-
-	switch (zone->type) {
-	case BLK_ZONE_TYPE_CONVENTIONAL:
-		if (!disk->conv_zones_bitmap) {
-			disk->conv_zones_bitmap = bitmap_zalloc(disk->nr_zones,
-								GFP_NOIO);
-			if (!disk->conv_zones_bitmap)
-				return -ENOMEM;
-		}
-		set_bit(idx, disk->conv_zones_bitmap);
-		break;
-	case BLK_ZONE_TYPE_SEQWRITE_REQ:
-	case BLK_ZONE_TYPE_SEQWRITE_PREF:
-		if (!disk->seq_zones_wlock) {
-			disk->seq_zones_wlock = bitmap_zalloc(disk->nr_zones,
-							      GFP_NOIO);
-			if (!disk->seq_zones_wlock)
-				return -ENOMEM;
-		}
-		if (!md->zwp_offset) {
-			md->zwp_offset =
-				kvcalloc(disk->nr_zones, sizeof(unsigned int),
-					 GFP_KERNEL);
-			if (!md->zwp_offset)
-				return -ENOMEM;
-		}
-		md->zwp_offset[idx] = dm_get_zone_wp_offset(zone);
-
-		break;
-	default:
-		DMERR("Invalid zone type 0x%x at sectors %llu",
-		      (int)zone->type, zone->start);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
 /*
  * Revalidate the zones of a mapped device to initialize resource necessary
  * for zone append emulation. Note that we cannot simply use the block layer
@@ -226,41 +154,32 @@ static int dm_zone_revalidate_cb(struct blk_zone *zone, unsigned int idx,
 static int dm_revalidate_zones(struct mapped_device *md, struct dm_table *t)
 {
 	struct gendisk *disk = md->disk;
-	unsigned int noio_flag;
 	int ret;
 
-	/*
-	 * Check if something changed. If yes, cleanup the current resources
-	 * and reallocate everything.
-	 */
+	/* Revalidate only if something changed. */
 	if (!disk->nr_zones || disk->nr_zones != md->nr_zones)
-		dm_cleanup_zoned_dev(md);
+		md->nr_zones = 0;
+
 	if (md->nr_zones)
 		return 0;
 
 	/*
-	 * Scan all zones to initialize everything. Ensure that all vmalloc
-	 * operations in this context are done as if GFP_NOIO was specified.
+	 * Our table is not live yet. So the call to dm_get_live_table()
+	 * in dm_blk_report_zones() will fail. Set a temporary pointer to
+	 * our table for dm_blk_report_zones() to use directly.
 	 */
-	noio_flag = memalloc_noio_save();
-	ret = dm_blk_do_report_zones(md, t, 0, disk->nr_zones,
-				     dm_zone_revalidate_cb, md);
-	memalloc_noio_restore(noio_flag);
-	if (ret < 0)
-		goto err;
-	if (ret != disk->nr_zones) {
-		ret = -EIO;
-		goto err;
+	md->zone_revalidate_map = t;
+	ret = blk_revalidate_disk_zones(disk, NULL);
+	md->zone_revalidate_map = NULL;
+
+	if (ret) {
+		DMERR("Revalidate zones failed %d", ret);
+		return ret;
 	}
 
 	md->nr_zones = disk->nr_zones;
 
 	return 0;
-
-err:
-	DMERR("Revalidate zones failed %d", ret);
-	dm_cleanup_zoned_dev(md);
-	return ret;
 }
 
 static int device_not_zone_append_capable(struct dm_target *ti,
@@ -291,292 +210,27 @@ int dm_set_zones_restrictions(struct dm_table *t, struct request_queue *q)
 	struct mapped_device *md = t->md;
 
 	/*
-	 * For a zoned target, the number of zones should be updated for the
-	 * correct value to be exposed in sysfs queue/nr_zones.
+	 * Check if zone append is natively supported, and if not, set the
+	 * mapped device queue as needing zone append emulation.
 	 */
 	WARN_ON_ONCE(queue_is_mq(q));
-	md->disk->nr_zones = bdev_nr_zones(md->disk->part0);
-
-	/* Check if zone append is natively supported */
 	if (dm_table_supports_zone_append(t)) {
 		clear_bit(DMF_EMULATE_ZONE_APPEND, &md->flags);
-		dm_cleanup_zoned_dev(md);
-		return 0;
+	} else {
+		set_bit(DMF_EMULATE_ZONE_APPEND, &md->flags);
+		blk_queue_max_zone_append_sectors(q, 0);
 	}
 
-	/*
-	 * Mark the mapped device as needing zone append emulation and
-	 * initialize the emulation resources once the capacity is set.
-	 */
-	set_bit(DMF_EMULATE_ZONE_APPEND, &md->flags);
 	if (!get_capacity(md->disk))
 		return 0;
 
-	return dm_revalidate_zones(md, t);
-}
-
-static int dm_update_zone_wp_offset_cb(struct blk_zone *zone, unsigned int idx,
-				       void *data)
-{
-	unsigned int *wp_offset = data;
-
-	*wp_offset = dm_get_zone_wp_offset(zone);
-
-	return 0;
-}
-
-static int dm_update_zone_wp_offset(struct mapped_device *md, unsigned int zno,
-				    unsigned int *wp_ofst)
-{
-	sector_t sector = zno * bdev_zone_sectors(md->disk->part0);
-	unsigned int noio_flag;
-	struct dm_table *t;
-	int srcu_idx, ret;
-
-	t = dm_get_live_table(md, &srcu_idx);
-	if (!t)
-		return -EIO;
-
-	/*
-	 * Ensure that all memory allocations in this context are done as if
-	 * GFP_NOIO was specified.
-	 */
-	noio_flag = memalloc_noio_save();
-	ret = dm_blk_do_report_zones(md, t, sector, 1,
-				     dm_update_zone_wp_offset_cb, wp_ofst);
-	memalloc_noio_restore(noio_flag);
-
-	dm_put_live_table(md, srcu_idx);
-
-	if (ret != 1)
-		return -EIO;
-
-	return 0;
-}
-
-struct orig_bio_details {
-	enum req_op op;
-	unsigned int nr_sectors;
-};
-
-/*
- * First phase of BIO mapping for targets with zone append emulation:
- * check all BIO that change a zone writer pointer and change zone
- * append operations into regular write operations.
- */
-static bool dm_zone_map_bio_begin(struct mapped_device *md,
-				  unsigned int zno, struct bio *clone)
-{
-	sector_t zsectors = bdev_zone_sectors(md->disk->part0);
-	unsigned int zwp_offset = READ_ONCE(md->zwp_offset[zno]);
-
-	/*
-	 * If the target zone is in an error state, recover by inspecting the
-	 * zone to get its current write pointer position. Note that since the
-	 * target zone is already locked, a BIO issuing context should never
-	 * see the zone write in the DM_ZONE_UPDATING_WP_OFST state.
-	 */
-	if (zwp_offset == DM_ZONE_INVALID_WP_OFST) {
-		if (dm_update_zone_wp_offset(md, zno, &zwp_offset))
-			return false;
-		WRITE_ONCE(md->zwp_offset[zno], zwp_offset);
-	}
-
-	switch (bio_op(clone)) {
-	case REQ_OP_ZONE_RESET:
-	case REQ_OP_ZONE_FINISH:
-		return true;
-	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE:
-		/* Writes must be aligned to the zone write pointer */
-		if ((clone->bi_iter.bi_sector & (zsectors - 1)) != zwp_offset)
-			return false;
-		break;
-	case REQ_OP_ZONE_APPEND:
-		/*
-		 * Change zone append operations into a non-mergeable regular
-		 * writes directed at the current write pointer position of the
-		 * target zone.
-		 */
-		clone->bi_opf = REQ_OP_WRITE | REQ_NOMERGE |
-			(clone->bi_opf & (~REQ_OP_MASK));
-		clone->bi_iter.bi_sector += zwp_offset;
-		break;
-	default:
-		DMWARN_LIMIT("Invalid BIO operation");
-		return false;
-	}
-
-	/* Cannot write to a full zone */
-	if (zwp_offset >= zsectors)
-		return false;
-
-	return true;
-}
-
-/*
- * Second phase of BIO mapping for targets with zone append emulation:
- * update the zone write pointer offset array to account for the additional
- * data written to a zone. Note that at this point, the remapped clone BIO
- * may already have completed, so we do not touch it.
- */
-static blk_status_t dm_zone_map_bio_end(struct mapped_device *md, unsigned int zno,
-					struct orig_bio_details *orig_bio_details,
-					unsigned int nr_sectors)
-{
-	unsigned int zwp_offset = READ_ONCE(md->zwp_offset[zno]);
-
-	/* The clone BIO may already have been completed and failed */
-	if (zwp_offset == DM_ZONE_INVALID_WP_OFST)
-		return BLK_STS_IOERR;
-
-	/* Update the zone wp offset */
-	switch (orig_bio_details->op) {
-	case REQ_OP_ZONE_RESET:
-		WRITE_ONCE(md->zwp_offset[zno], 0);
-		return BLK_STS_OK;
-	case REQ_OP_ZONE_FINISH:
-		WRITE_ONCE(md->zwp_offset[zno],
-			   bdev_zone_sectors(md->disk->part0));
-		return BLK_STS_OK;
-	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE:
-		WRITE_ONCE(md->zwp_offset[zno], zwp_offset + nr_sectors);
-		return BLK_STS_OK;
-	case REQ_OP_ZONE_APPEND:
-		/*
-		 * Check that the target did not truncate the write operation
-		 * emulating a zone append.
-		 */
-		if (nr_sectors != orig_bio_details->nr_sectors) {
-			DMWARN_LIMIT("Truncated write for zone append");
-			return BLK_STS_IOERR;
-		}
-		WRITE_ONCE(md->zwp_offset[zno], zwp_offset + nr_sectors);
-		return BLK_STS_OK;
-	default:
-		DMWARN_LIMIT("Invalid BIO operation");
-		return BLK_STS_IOERR;
+	if (!md->disk->nr_zones) {
+		DMINFO("%s using %s zone append",
+		       md->disk->disk_name,
+		       queue_emulates_zone_append(q) ? "emulated" : "native");
 	}
-}
-
-static inline void dm_zone_lock(struct gendisk *disk, unsigned int zno,
-				struct bio *clone)
-{
-	if (WARN_ON_ONCE(bio_flagged(clone, BIO_ZONE_WRITE_LOCKED)))
-		return;
-
-	wait_on_bit_lock_io(disk->seq_zones_wlock, zno, TASK_UNINTERRUPTIBLE);
-	bio_set_flag(clone, BIO_ZONE_WRITE_LOCKED);
-}
-
-static inline void dm_zone_unlock(struct gendisk *disk, unsigned int zno,
-				  struct bio *clone)
-{
-	if (!bio_flagged(clone, BIO_ZONE_WRITE_LOCKED))
-		return;
-
-	WARN_ON_ONCE(!test_bit(zno, disk->seq_zones_wlock));
-	clear_bit_unlock(zno, disk->seq_zones_wlock);
-	smp_mb__after_atomic();
-	wake_up_bit(disk->seq_zones_wlock, zno);
-
-	bio_clear_flag(clone, BIO_ZONE_WRITE_LOCKED);
-}
 
-static bool dm_need_zone_wp_tracking(struct bio *bio)
-{
-	/*
-	 * Special processing is not needed for operations that do not need the
-	 * zone write lock, that is, all operations that target conventional
-	 * zones and all operations that do not modify directly a sequential
-	 * zone write pointer.
-	 */
-	if (op_is_flush(bio->bi_opf) && !bio_sectors(bio))
-		return false;
-	switch (bio_op(bio)) {
-	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE:
-	case REQ_OP_ZONE_RESET:
-	case REQ_OP_ZONE_FINISH:
-	case REQ_OP_ZONE_APPEND:
-		return bio_zone_is_seq(bio);
-	default:
-		return false;
-	}
-}
-
-/*
- * Special IO mapping for targets needing zone append emulation.
- */
-int dm_zone_map_bio(struct dm_target_io *tio)
-{
-	struct dm_io *io = tio->io;
-	struct dm_target *ti = tio->ti;
-	struct mapped_device *md = io->md;
-	struct bio *clone = &tio->clone;
-	struct orig_bio_details orig_bio_details;
-	unsigned int zno;
-	blk_status_t sts;
-	int r;
-
-	/*
-	 * IOs that do not change a zone write pointer do not need
-	 * any additional special processing.
-	 */
-	if (!dm_need_zone_wp_tracking(clone))
-		return ti->type->map(ti, clone);
-
-	/* Lock the target zone */
-	zno = bio_zone_no(clone);
-	dm_zone_lock(md->disk, zno, clone);
-
-	orig_bio_details.nr_sectors = bio_sectors(clone);
-	orig_bio_details.op = bio_op(clone);
-
-	/*
-	 * Check that the bio and the target zone write pointer offset are
-	 * both valid, and if the bio is a zone append, remap it to a write.
-	 */
-	if (!dm_zone_map_bio_begin(md, zno, clone)) {
-		dm_zone_unlock(md->disk, zno, clone);
-		return DM_MAPIO_KILL;
-	}
-
-	/* Let the target do its work */
-	r = ti->type->map(ti, clone);
-	switch (r) {
-	case DM_MAPIO_SUBMITTED:
-		/*
-		 * The target submitted the clone BIO. The target zone will
-		 * be unlocked on completion of the clone.
-		 */
-		sts = dm_zone_map_bio_end(md, zno, &orig_bio_details,
-					  *tio->len_ptr);
-		break;
-	case DM_MAPIO_REMAPPED:
-		/*
-		 * The target only remapped the clone BIO. In case of error,
-		 * unlock the target zone here as the clone will not be
-		 * submitted.
-		 */
-		sts = dm_zone_map_bio_end(md, zno, &orig_bio_details,
-					  *tio->len_ptr);
-		if (sts != BLK_STS_OK)
-			dm_zone_unlock(md->disk, zno, clone);
-		break;
-	case DM_MAPIO_REQUEUE:
-	case DM_MAPIO_KILL:
-	default:
-		dm_zone_unlock(md->disk, zno, clone);
-		sts = BLK_STS_IOERR;
-		break;
-	}
-
-	if (sts != BLK_STS_OK)
-		return DM_MAPIO_KILL;
-
-	return r;
+	return dm_revalidate_zones(md, t);
 }
 
 /*
@@ -587,61 +241,17 @@ void dm_zone_endio(struct dm_io *io, struct bio *clone)
 	struct mapped_device *md = io->md;
 	struct gendisk *disk = md->disk;
 	struct bio *orig_bio = io->orig_bio;
-	unsigned int zwp_offset;
-	unsigned int zno;
 
 	/*
-	 * For targets that do not emulate zone append, we only need to
-	 * handle native zone-append bios.
+	 * Get the offset within the zone of the written sector
+	 * and add that to the original bio sector position.
 	 */
-	if (!dm_emulate_zone_append(md)) {
-		/*
-		 * Get the offset within the zone of the written sector
-		 * and add that to the original bio sector position.
-		 */
-		if (clone->bi_status == BLK_STS_OK &&
-		    bio_op(clone) == REQ_OP_ZONE_APPEND) {
-			sector_t mask =
-				(sector_t)bdev_zone_sectors(disk->part0) - 1;
-
-			orig_bio->bi_iter.bi_sector +=
-				clone->bi_iter.bi_sector & mask;
-		}
-
-		return;
-	}
+	if (clone->bi_status == BLK_STS_OK &&
+	    bio_op(clone) == REQ_OP_ZONE_APPEND) {
+		sector_t mask = bdev_zone_sectors(disk->part0) - 1;
 
-	/*
-	 * For targets that do emulate zone append, if the clone BIO does not
-	 * own the target zone write lock, we have nothing to do.
-	 */
-	if (!bio_flagged(clone, BIO_ZONE_WRITE_LOCKED))
-		return;
-
-	zno = bio_zone_no(orig_bio);
-
-	if (clone->bi_status != BLK_STS_OK) {
-		/*
-		 * BIOs that modify a zone write pointer may leave the zone
-		 * in an unknown state in case of failure (e.g. the write
-		 * pointer was only partially advanced). In this case, set
-		 * the target zone write pointer as invalid unless it is
-		 * already being updated.
-		 */
-		WRITE_ONCE(md->zwp_offset[zno], DM_ZONE_INVALID_WP_OFST);
-	} else if (bio_op(orig_bio) == REQ_OP_ZONE_APPEND) {
-		/*
-		 * Get the written sector for zone append operation that were
-		 * emulated using regular write operations.
-		 */
-		zwp_offset = READ_ONCE(md->zwp_offset[zno]);
-		if (WARN_ON_ONCE(zwp_offset < bio_sectors(orig_bio)))
-			WRITE_ONCE(md->zwp_offset[zno],
-				   DM_ZONE_INVALID_WP_OFST);
-		else
-			orig_bio->bi_iter.bi_sector +=
-				zwp_offset - bio_sectors(orig_bio);
+		orig_bio->bi_iter.bi_sector += clone->bi_iter.bi_sector & mask;
 	}
 
-	dm_zone_unlock(disk, zno, clone);
+	return;
 }
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 56aa2a8b9d71..2369d10c8475 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1422,25 +1422,12 @@ static void __map_bio(struct bio *clone)
 		down(&md->swap_bios_semaphore);
 	}
 
-	if (static_branch_unlikely(&zoned_enabled)) {
-		/*
-		 * Check if the IO needs a special mapping due to zone append
-		 * emulation on zoned target. In this case, dm_zone_map_bio()
-		 * calls the target map operation.
-		 */
-		if (unlikely(dm_emulate_zone_append(md)))
-			r = dm_zone_map_bio(tio);
-		else
-			goto do_map;
-	} else {
-do_map:
-		if (likely(ti->type->map == linear_map))
-			r = linear_map(ti, clone);
-		else if (ti->type->map == stripe_map)
-			r = stripe_map(ti, clone);
-		else
-			r = ti->type->map(ti, clone);
-	}
+	if (likely(ti->type->map == linear_map))
+		r = linear_map(ti, clone);
+	else if (ti->type->map == stripe_map)
+		r = stripe_map(ti, clone);
+	else
+		r = ti->type->map(ti, clone);
 
 	switch (r) {
 	case DM_MAPIO_SUBMITTED:
@@ -1768,6 +1755,33 @@ static void init_clone_info(struct clone_info *ci, struct dm_io *io,
 		ci->sector_count = 0;
 }
 
+#ifdef CONFIG_BLK_DEV_ZONED
+static inline bool dm_zone_bio_needs_split(struct mapped_device *md,
+					   struct bio *bio)
+{
+	/*
+	 * For mapped device that need zone append emulation, we must
+	 * split any large BIO that straddles zone boundaries.
+	 */
+	return dm_emulate_zone_append(md) && bio_straddles_zones(bio) &&
+		!bio_flagged(bio, BIO_ZONE_WRITE_PLUGGING);
+}
+static inline bool dm_zone_plug_bio(struct mapped_device *md, struct bio *bio)
+{
+	return dm_emulate_zone_append(md) && blk_zone_plug_bio(bio, 0);
+}
+#else
+static inline bool dm_zone_bio_needs_split(struct mapped_device *md,
+					   struct bio *bio)
+{
+	return false;
+}
+static inline bool dm_zone_plug_bio(struct mapped_device *md, struct bio *bio)
+{
+	return false;
+}
+#endif
+
 /*
  * Entry point to split a bio into clones and submit them to the targets.
  */
@@ -1777,19 +1791,32 @@ static void dm_split_and_process_bio(struct mapped_device *md,
 	struct clone_info ci;
 	struct dm_io *io;
 	blk_status_t error = BLK_STS_OK;
-	bool is_abnormal;
+	bool is_abnormal, need_split;
+
+	need_split = is_abnormal = is_abnormal_io(bio);
+	if (static_branch_unlikely(&zoned_enabled))
+		need_split = is_abnormal || dm_zone_bio_needs_split(md, bio);
 
-	is_abnormal = is_abnormal_io(bio);
-	if (unlikely(is_abnormal)) {
+	if (unlikely(need_split)) {
 		/*
 		 * Use bio_split_to_limits() for abnormal IO (e.g. discard, etc)
 		 * otherwise associated queue_limits won't be imposed.
+		 * Also split the BIO for mapped devices needing zone append
+		 * emulation to ensure that the BIO does not cross zone
+		 * boundaries.
 		 */
 		bio = bio_split_to_limits(bio);
 		if (!bio)
 			return;
 	}
 
+	/*
+	 * Use the block layer zone write plugging for mapped devices that
+	 * need zone append emulation (e.g. dm-crypt).
+	 */
+	if (static_branch_unlikely(&zoned_enabled) && dm_zone_plug_bio(md, bio))
+		return;
+
 	/* Only support nowait for normal IO */
 	if (unlikely(bio->bi_opf & REQ_NOWAIT) && !is_abnormal) {
 		io = alloc_io(md, bio, GFP_NOWAIT);
@@ -2010,7 +2037,6 @@ static void cleanup_mapped_device(struct mapped_device *md)
 		md->dax_dev = NULL;
 	}
 
-	dm_cleanup_zoned_dev(md);
 	if (md->disk) {
 		spin_lock(&_minor_lock);
 		md->disk->private_data = NULL;
diff --git a/drivers/md/dm.h b/drivers/md/dm.h
index 7f1acbf6bd9e..e0c57f19839b 100644
--- a/drivers/md/dm.h
+++ b/drivers/md/dm.h
@@ -104,13 +104,11 @@ int dm_setup_md_queue(struct mapped_device *md, struct dm_table *t);
 int dm_set_zones_restrictions(struct dm_table *t, struct request_queue *q);
 void dm_zone_endio(struct dm_io *io, struct bio *clone);
 #ifdef CONFIG_BLK_DEV_ZONED
-void dm_cleanup_zoned_dev(struct mapped_device *md);
 int dm_blk_report_zones(struct gendisk *disk, sector_t sector,
 			unsigned int nr_zones, report_zones_cb cb, void *data);
 bool dm_is_zone_write(struct mapped_device *md, struct bio *bio);
 int dm_zone_map_bio(struct dm_target_io *io);
 #else
-static inline void dm_cleanup_zoned_dev(struct mapped_device *md) {}
 #define dm_blk_report_zones	NULL
 static inline bool dm_is_zone_write(struct mapped_device *md, struct bio *bio)
 {
-- 
2.44.0

[PATCH v7 13/28] scsi: sd: Use the block layer zone append emulation

[Damien Le Moal]

Set the request queue of a TYPE_ZBC device as needing zone append
emulation by setting the device queue max_zone_append_sectors limit to
0. This enables the block layer generic implementation provided by zone
write plugging. With this, the sd driver will never see a
REQ_OP_ZONE_APPEND request and the zone append emulation code
implemented in sd_zbc.c can be removed.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 drivers/scsi/sd.c     |   8 -
 drivers/scsi/sd.h     |  19 ---
 drivers/scsi/sd_zbc.c | 335 ++----------------------------------------
 3 files changed, 10 insertions(+), 352 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 58fdf679341d..03ec24c8bd77 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1260,12 +1260,6 @@ static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
 		}
 	}
 
-	if (req_op(rq) == REQ_OP_ZONE_APPEND) {
-		ret = sd_zbc_prepare_zone_append(cmd, &lba, nr_blocks);
-		if (ret)
-			goto fail;
-	}
-
 	fua = rq->cmd_flags & REQ_FUA ? 0x8 : 0;
 	dix = scsi_prot_sg_count(cmd);
 	dif = scsi_host_dif_capable(cmd->device->host, sdkp->protection_type);
@@ -1348,7 +1342,6 @@ static blk_status_t sd_init_command(struct scsi_cmnd *cmd)
 		return sd_setup_flush_cmnd(cmd);
 	case REQ_OP_READ:
 	case REQ_OP_WRITE:
-	case REQ_OP_ZONE_APPEND:
 		return sd_setup_read_write_cmnd(cmd);
 	case REQ_OP_ZONE_RESET:
 		return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_RESET_WRITE_POINTER,
@@ -3979,7 +3972,6 @@ static void scsi_disk_release(struct device *dev)
 	struct scsi_disk *sdkp = to_scsi_disk(dev);
 
 	ida_free(&sd_index_ida, sdkp->index);
-	sd_zbc_free_zone_info(sdkp);
 	put_device(&sdkp->device->sdev_gendev);
 	free_opal_dev(sdkp->opal_dev);
 
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 5c4285a582b2..49dd600bfa48 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -104,12 +104,6 @@ struct scsi_disk {
 	 * between zone starting LBAs is constant.
 	 */
 	u32		zone_starting_lba_gran;
-	u32		*zones_wp_offset;
-	spinlock_t	zones_wp_offset_lock;
-	u32		*rev_wp_offset;
-	struct mutex	rev_mutex;
-	struct work_struct zone_wp_offset_work;
-	char		*zone_wp_update_buf;
 #endif
 	atomic_t	openers;
 	sector_t	capacity;	/* size in logical blocks */
@@ -245,7 +239,6 @@ static inline int sd_is_zoned(struct scsi_disk *sdkp)
 
 #ifdef CONFIG_BLK_DEV_ZONED
 
-void sd_zbc_free_zone_info(struct scsi_disk *sdkp);
 int sd_zbc_read_zones(struct scsi_disk *sdkp, u8 buf[SD_BUF_SIZE]);
 int sd_zbc_revalidate_zones(struct scsi_disk *sdkp);
 blk_status_t sd_zbc_setup_zone_mgmt_cmnd(struct scsi_cmnd *cmd,
@@ -255,13 +248,8 @@ unsigned int sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
 int sd_zbc_report_zones(struct gendisk *disk, sector_t sector,
 		unsigned int nr_zones, report_zones_cb cb, void *data);
 
-blk_status_t sd_zbc_prepare_zone_append(struct scsi_cmnd *cmd, sector_t *lba,
-				        unsigned int nr_blocks);
-
 #else /* CONFIG_BLK_DEV_ZONED */
 
-static inline void sd_zbc_free_zone_info(struct scsi_disk *sdkp) {}
-
 static inline int sd_zbc_read_zones(struct scsi_disk *sdkp, u8 buf[SD_BUF_SIZE])
 {
 	return 0;
@@ -285,13 +273,6 @@ static inline unsigned int sd_zbc_complete(struct scsi_cmnd *cmd,
 	return good_bytes;
 }
 
-static inline blk_status_t sd_zbc_prepare_zone_append(struct scsi_cmnd *cmd,
-						      sector_t *lba,
-						      unsigned int nr_blocks)
-{
-	return BLK_STS_TARGET;
-}
-
 #define sd_zbc_report_zones NULL
 
 #endif /* CONFIG_BLK_DEV_ZONED */
diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index 26af5ab7d7c1..d0ead9858954 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -23,36 +23,6 @@
 #define CREATE_TRACE_POINTS
 #include "sd_trace.h"
 
-/**
- * sd_zbc_get_zone_wp_offset - Get zone write pointer offset.
- * @zone: Zone for which to return the write pointer offset.
- *
- * Return: offset of the write pointer from the start of the zone.
- */
-static unsigned int sd_zbc_get_zone_wp_offset(struct blk_zone *zone)
-{
-	if (zone->type == ZBC_ZONE_TYPE_CONV)
-		return 0;
-
-	switch (zone->cond) {
-	case BLK_ZONE_COND_IMP_OPEN:
-	case BLK_ZONE_COND_EXP_OPEN:
-	case BLK_ZONE_COND_CLOSED:
-		return zone->wp - zone->start;
-	case BLK_ZONE_COND_FULL:
-		return zone->len;
-	case BLK_ZONE_COND_EMPTY:
-	case BLK_ZONE_COND_OFFLINE:
-	case BLK_ZONE_COND_READONLY:
-	default:
-		/*
-		 * Offline and read-only zones do not have a valid
-		 * write pointer. Use 0 as for an empty zone.
-		 */
-		return 0;
-	}
-}
-
 /* Whether or not a SCSI zone descriptor describes a gap zone. */
 static bool sd_zbc_is_gap_zone(const u8 buf[64])
 {
@@ -121,9 +91,6 @@ static int sd_zbc_parse_report(struct scsi_disk *sdkp, const u8 buf[64],
 	if (ret)
 		return ret;
 
-	if (sdkp->rev_wp_offset)
-		sdkp->rev_wp_offset[idx] = sd_zbc_get_zone_wp_offset(&zone);
-
 	return 0;
 }
 
@@ -347,123 +314,6 @@ static blk_status_t sd_zbc_cmnd_checks(struct scsi_cmnd *cmd)
 	return BLK_STS_OK;
 }
 
-#define SD_ZBC_INVALID_WP_OFST	(~0u)
-#define SD_ZBC_UPDATING_WP_OFST	(SD_ZBC_INVALID_WP_OFST - 1)
-
-static int sd_zbc_update_wp_offset_cb(struct blk_zone *zone, unsigned int idx,
-				    void *data)
-{
-	struct scsi_disk *sdkp = data;
-
-	lockdep_assert_held(&sdkp->zones_wp_offset_lock);
-
-	sdkp->zones_wp_offset[idx] = sd_zbc_get_zone_wp_offset(zone);
-
-	return 0;
-}
-
-/*
- * An attempt to append a zone triggered an invalid write pointer error.
- * Reread the write pointer of the zone(s) in which the append failed.
- */
-static void sd_zbc_update_wp_offset_workfn(struct work_struct *work)
-{
-	struct scsi_disk *sdkp;
-	unsigned long flags;
-	sector_t zno;
-	int ret;
-
-	sdkp = container_of(work, struct scsi_disk, zone_wp_offset_work);
-
-	spin_lock_irqsave(&sdkp->zones_wp_offset_lock, flags);
-	for (zno = 0; zno < sdkp->zone_info.nr_zones; zno++) {
-		if (sdkp->zones_wp_offset[zno] != SD_ZBC_UPDATING_WP_OFST)
-			continue;
-
-		spin_unlock_irqrestore(&sdkp->zones_wp_offset_lock, flags);
-		ret = sd_zbc_do_report_zones(sdkp, sdkp->zone_wp_update_buf,
-					     SD_BUF_SIZE,
-					     zno * sdkp->zone_info.zone_blocks, true);
-		spin_lock_irqsave(&sdkp->zones_wp_offset_lock, flags);
-		if (!ret)
-			sd_zbc_parse_report(sdkp, sdkp->zone_wp_update_buf + 64,
-					    zno, sd_zbc_update_wp_offset_cb,
-					    sdkp);
-	}
-	spin_unlock_irqrestore(&sdkp->zones_wp_offset_lock, flags);
-
-	scsi_device_put(sdkp->device);
-}
-
-/**
- * sd_zbc_prepare_zone_append() - Prepare an emulated ZONE_APPEND command.
- * @cmd: the command to setup
- * @lba: the LBA to patch
- * @nr_blocks: the number of LBAs to be written
- *
- * Called from sd_setup_read_write_cmnd() for REQ_OP_ZONE_APPEND.
- * @sd_zbc_prepare_zone_append() handles the necessary zone wrote locking and
- * patching of the lba for an emulated ZONE_APPEND command.
- *
- * In case the cached write pointer offset is %SD_ZBC_INVALID_WP_OFST it will
- * schedule a REPORT ZONES command and return BLK_STS_IOERR.
- */
-blk_status_t sd_zbc_prepare_zone_append(struct scsi_cmnd *cmd, sector_t *lba,
-					unsigned int nr_blocks)
-{
-	struct request *rq = scsi_cmd_to_rq(cmd);
-	struct scsi_disk *sdkp = scsi_disk(rq->q->disk);
-	unsigned int wp_offset, zno = blk_rq_zone_no(rq);
-	unsigned long flags;
-	blk_status_t ret;
-
-	ret = sd_zbc_cmnd_checks(cmd);
-	if (ret != BLK_STS_OK)
-		return ret;
-
-	if (!blk_rq_zone_is_seq(rq))
-		return BLK_STS_IOERR;
-
-	/* Unlock of the write lock will happen in sd_zbc_complete() */
-	if (!blk_req_zone_write_trylock(rq))
-		return BLK_STS_ZONE_RESOURCE;
-
-	spin_lock_irqsave(&sdkp->zones_wp_offset_lock, flags);
-	wp_offset = sdkp->zones_wp_offset[zno];
-	switch (wp_offset) {
-	case SD_ZBC_INVALID_WP_OFST:
-		/*
-		 * We are about to schedule work to update a zone write pointer
-		 * offset, which will cause the zone append command to be
-		 * requeued. So make sure that the scsi device does not go away
-		 * while the work is being processed.
-		 */
-		if (scsi_device_get(sdkp->device)) {
-			ret = BLK_STS_IOERR;
-			break;
-		}
-		sdkp->zones_wp_offset[zno] = SD_ZBC_UPDATING_WP_OFST;
-		schedule_work(&sdkp->zone_wp_offset_work);
-		fallthrough;
-	case SD_ZBC_UPDATING_WP_OFST:
-		ret = BLK_STS_DEV_RESOURCE;
-		break;
-	default:
-		wp_offset = sectors_to_logical(sdkp->device, wp_offset);
-		if (wp_offset + nr_blocks > sdkp->zone_info.zone_blocks) {
-			ret = BLK_STS_IOERR;
-			break;
-		}
-
-		trace_scsi_prepare_zone_append(cmd, *lba, wp_offset);
-		*lba += wp_offset;
-	}
-	spin_unlock_irqrestore(&sdkp->zones_wp_offset_lock, flags);
-	if (ret)
-		blk_req_zone_write_unlock(rq);
-	return ret;
-}
-
 /**
  * sd_zbc_setup_zone_mgmt_cmnd - Prepare a zone ZBC_OUT command. The operations
  *			can be RESET WRITE POINTER, OPEN, CLOSE or FINISH.
@@ -504,96 +354,6 @@ blk_status_t sd_zbc_setup_zone_mgmt_cmnd(struct scsi_cmnd *cmd,
 	return BLK_STS_OK;
 }
 
-static bool sd_zbc_need_zone_wp_update(struct request *rq)
-{
-	switch (req_op(rq)) {
-	case REQ_OP_ZONE_APPEND:
-	case REQ_OP_ZONE_FINISH:
-	case REQ_OP_ZONE_RESET:
-	case REQ_OP_ZONE_RESET_ALL:
-		return true;
-	case REQ_OP_WRITE:
-	case REQ_OP_WRITE_ZEROES:
-		return blk_rq_zone_is_seq(rq);
-	default:
-		return false;
-	}
-}
-
-/**
- * sd_zbc_zone_wp_update - Update cached zone write pointer upon cmd completion
- * @cmd: Completed command
- * @good_bytes: Command reply bytes
- *
- * Called from sd_zbc_complete() to handle the update of the cached zone write
- * pointer value in case an update is needed.
- */
-static unsigned int sd_zbc_zone_wp_update(struct scsi_cmnd *cmd,
-					  unsigned int good_bytes)
-{
-	int result = cmd->result;
-	struct request *rq = scsi_cmd_to_rq(cmd);
-	struct scsi_disk *sdkp = scsi_disk(rq->q->disk);
-	unsigned int zno = blk_rq_zone_no(rq);
-	enum req_op op = req_op(rq);
-	unsigned long flags;
-
-	/*
-	 * If we got an error for a command that needs updating the write
-	 * pointer offset cache, we must mark the zone wp offset entry as
-	 * invalid to force an update from disk the next time a zone append
-	 * command is issued.
-	 */
-	spin_lock_irqsave(&sdkp->zones_wp_offset_lock, flags);
-
-	if (result && op != REQ_OP_ZONE_RESET_ALL) {
-		if (op == REQ_OP_ZONE_APPEND) {
-			/* Force complete completion (no retry) */
-			good_bytes = 0;
-			scsi_set_resid(cmd, blk_rq_bytes(rq));
-		}
-
-		/*
-		 * Force an update of the zone write pointer offset on
-		 * the next zone append access.
-		 */
-		if (sdkp->zones_wp_offset[zno] != SD_ZBC_UPDATING_WP_OFST)
-			sdkp->zones_wp_offset[zno] = SD_ZBC_INVALID_WP_OFST;
-		goto unlock_wp_offset;
-	}
-
-	switch (op) {
-	case REQ_OP_ZONE_APPEND:
-		trace_scsi_zone_wp_update(cmd, rq->__sector,
-				  sdkp->zones_wp_offset[zno], good_bytes);
-		rq->__sector += sdkp->zones_wp_offset[zno];
-		fallthrough;
-	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE:
-		if (sdkp->zones_wp_offset[zno] < sd_zbc_zone_sectors(sdkp))
-			sdkp->zones_wp_offset[zno] +=
-						good_bytes >> SECTOR_SHIFT;
-		break;
-	case REQ_OP_ZONE_RESET:
-		sdkp->zones_wp_offset[zno] = 0;
-		break;
-	case REQ_OP_ZONE_FINISH:
-		sdkp->zones_wp_offset[zno] = sd_zbc_zone_sectors(sdkp);
-		break;
-	case REQ_OP_ZONE_RESET_ALL:
-		memset(sdkp->zones_wp_offset, 0,
-		       sdkp->zone_info.nr_zones * sizeof(unsigned int));
-		break;
-	default:
-		break;
-	}
-
-unlock_wp_offset:
-	spin_unlock_irqrestore(&sdkp->zones_wp_offset_lock, flags);
-
-	return good_bytes;
-}
-
 /**
  * sd_zbc_complete - ZBC command post processing.
  * @cmd: Completed command
@@ -619,11 +379,7 @@ unsigned int sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
 		 * so be quiet about the error.
 		 */
 		rq->rq_flags |= RQF_QUIET;
-	} else if (sd_zbc_need_zone_wp_update(rq))
-		good_bytes = sd_zbc_zone_wp_update(cmd, good_bytes);
-
-	if (req_op(rq) == REQ_OP_ZONE_APPEND)
-		blk_req_zone_write_unlock(rq);
+	}
 
 	return good_bytes;
 }
@@ -780,46 +536,6 @@ static void sd_zbc_print_zones(struct scsi_disk *sdkp)
 			  sdkp->zone_info.zone_blocks);
 }
 
-static int sd_zbc_init_disk(struct scsi_disk *sdkp)
-{
-	sdkp->zones_wp_offset = NULL;
-	spin_lock_init(&sdkp->zones_wp_offset_lock);
-	sdkp->rev_wp_offset = NULL;
-	mutex_init(&sdkp->rev_mutex);
-	INIT_WORK(&sdkp->zone_wp_offset_work, sd_zbc_update_wp_offset_workfn);
-	sdkp->zone_wp_update_buf = kzalloc(SD_BUF_SIZE, GFP_KERNEL);
-	if (!sdkp->zone_wp_update_buf)
-		return -ENOMEM;
-
-	return 0;
-}
-
-void sd_zbc_free_zone_info(struct scsi_disk *sdkp)
-{
-	if (!sdkp->zone_wp_update_buf)
-		return;
-
-	/* Serialize against revalidate zones */
-	mutex_lock(&sdkp->rev_mutex);
-
-	kvfree(sdkp->zones_wp_offset);
-	sdkp->zones_wp_offset = NULL;
-	kfree(sdkp->zone_wp_update_buf);
-	sdkp->zone_wp_update_buf = NULL;
-
-	sdkp->early_zone_info = (struct zoned_disk_info){ };
-	sdkp->zone_info = (struct zoned_disk_info){ };
-
-	mutex_unlock(&sdkp->rev_mutex);
-}
-
-static void sd_zbc_revalidate_zones_cb(struct gendisk *disk)
-{
-	struct scsi_disk *sdkp = scsi_disk(disk);
-
-	swap(sdkp->zones_wp_offset, sdkp->rev_wp_offset);
-}
-
 /*
  * Call blk_revalidate_disk_zones() if any of the zoned disk properties have
  * changed that make it necessary to call that function. Called by
@@ -831,18 +547,8 @@ int sd_zbc_revalidate_zones(struct scsi_disk *sdkp)
 	struct request_queue *q = disk->queue;
 	u32 zone_blocks = sdkp->early_zone_info.zone_blocks;
 	unsigned int nr_zones = sdkp->early_zone_info.nr_zones;
-	int ret = 0;
 	unsigned int flags;
-
-	/*
-	 * For all zoned disks, initialize zone append emulation data if not
-	 * already done.
-	 */
-	if (sd_is_zoned(sdkp) && !sdkp->zone_wp_update_buf) {
-		ret = sd_zbc_init_disk(sdkp);
-		if (ret)
-			return ret;
-	}
+	int ret;
 
 	/*
 	 * There is nothing to do for regular disks, including host-aware disks
@@ -851,50 +557,32 @@ int sd_zbc_revalidate_zones(struct scsi_disk *sdkp)
 	if (!blk_queue_is_zoned(q))
 		return 0;
 
-	/*
-	 * Make sure revalidate zones are serialized to ensure exclusive
-	 * updates of the scsi disk data.
-	 */
-	mutex_lock(&sdkp->rev_mutex);
-
 	if (sdkp->zone_info.zone_blocks == zone_blocks &&
 	    sdkp->zone_info.nr_zones == nr_zones &&
 	    disk->nr_zones == nr_zones)
-		goto unlock;
+		return 0;
 
-	flags = memalloc_noio_save();
 	sdkp->zone_info.zone_blocks = zone_blocks;
 	sdkp->zone_info.nr_zones = nr_zones;
-	sdkp->rev_wp_offset = kvcalloc(nr_zones, sizeof(u32), GFP_KERNEL);
-	if (!sdkp->rev_wp_offset) {
-		ret = -ENOMEM;
-		memalloc_noio_restore(flags);
-		goto unlock;
-	}
 
 	blk_queue_chunk_sectors(q,
 			logical_to_sectors(sdkp->device, zone_blocks));
-	blk_queue_max_zone_append_sectors(q,
-			q->limits.max_segments << PAGE_SECTORS_SHIFT);
 
-	ret = blk_revalidate_disk_zones(disk, sd_zbc_revalidate_zones_cb);
+	/* Enable block layer zone append emulation */
+	blk_queue_max_zone_append_sectors(q, 0);
 
+	flags = memalloc_noio_save();
+	ret = blk_revalidate_disk_zones(disk, NULL);
 	memalloc_noio_restore(flags);
-	kvfree(sdkp->rev_wp_offset);
-	sdkp->rev_wp_offset = NULL;
-
 	if (ret) {
 		sdkp->zone_info = (struct zoned_disk_info){ };
 		sdkp->capacity = 0;
-		goto unlock;
+		return ret;
 	}
 
 	sd_zbc_print_zones(sdkp);
 
-unlock:
-	mutex_unlock(&sdkp->rev_mutex);
-
-	return ret;
+	return 0;
 }
 
 /**
@@ -917,10 +605,8 @@ int sd_zbc_read_zones(struct scsi_disk *sdkp, u8 buf[SD_BUF_SIZE])
 	if (!sd_is_zoned(sdkp)) {
 		/*
 		 * Device managed or normal SCSI disk, no special handling
-		 * required. Nevertheless, free the disk zone information in
-		 * case the device type changed.
+		 * required.
 		 */
-		sd_zbc_free_zone_info(sdkp);
 		return 0;
 	}
 
@@ -941,7 +627,6 @@ int sd_zbc_read_zones(struct scsi_disk *sdkp, u8 buf[SD_BUF_SIZE])
 
 	/* The drive satisfies the kernel restrictions: set it up */
 	blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, q);
-	blk_queue_required_elevator_features(q, ELEVATOR_F_ZBD_SEQ_WRITE);
 	if (sdkp->zones_max_open == U32_MAX)
 		disk_set_max_open_zones(disk, 0);
 	else
-- 
2.44.0

[PATCH v7 14/28] ublk_drv: Do not request ELEVATOR_F_ZBD_SEQ_WRITE elevator feature

[Damien Le Moal]

With zone write plugging enabled at the block layer level, any zone
device can only ever see at most a single write operation per zone.
There is thus no need to request a block scheduler with strick per-zone
sequential write ordering control through the ELEVATOR_F_ZBD_SEQ_WRITE
feature. Removing this allows using a zoned ublk device with any
scheduler, including "none".

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 drivers/block/ublk_drv.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index bea3d5cf8a83..ab6af84e327c 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -249,8 +249,7 @@ static int ublk_dev_param_zoned_validate(const struct ublk_device *ub)
 static void ublk_dev_param_zoned_apply(struct ublk_device *ub)
 {
 	blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, ub->ub_disk->queue);
-	blk_queue_required_elevator_features(ub->ub_disk->queue,
-					     ELEVATOR_F_ZBD_SEQ_WRITE);
+
 	ub->ub_disk->nr_zones = ublk_get_nr_zones(ub);
 }
 
-- 
2.44.0

[PATCH v7 15/28] null_blk: Do not request ELEVATOR_F_ZBD_SEQ_WRITE elevator feature

[Damien Le Moal]

With zone write plugging enabled at the block layer level, a zoned
device can only ever see at most a single write operation per zone.
There is thus no need to request a block scheduler with strick per-zone
sequential write ordering control through the ELEVATOR_F_ZBD_SEQ_WRITE
feature. Removing this allows using a zoned null_blk device with any
scheduler, including "none".

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 drivers/block/null_blk/zoned.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/block/null_blk/zoned.c b/drivers/block/null_blk/zoned.c
index 1689e2584104..8e217f8fadcd 100644
--- a/drivers/block/null_blk/zoned.c
+++ b/drivers/block/null_blk/zoned.c
@@ -165,7 +165,6 @@ int null_register_zoned_dev(struct nullb *nullb)
 	struct request_queue *q = nullb->q;
 
 	blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, q);
-	blk_queue_required_elevator_features(q, ELEVATOR_F_ZBD_SEQ_WRITE);
 	nullb->disk->nr_zones = bdev_nr_zones(nullb->disk->part0);
 	return blk_revalidate_disk_zones(nullb->disk, NULL);
 }
-- 
2.44.0

[PATCH v7 16/28] null_blk: Introduce zone_append_max_sectors attribute

[Damien Le Moal]

Add the zone_append_max_sectors configfs attribute and module parameter
to allow configuring the maximum number of 512B sectors of zone append
operations. This attribute is meaningful only for zoned null block
devices.

If not specified, the default is unchanged and the zoned device max
append sectors limit is set to the device max sectors limit.
If a non 0 value is used for this attribute, which is the default,
then native support for zone append operations is enabled.
Setting a 0 value disables native zone append operations support to
instead use the block layer emulation.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 drivers/block/null_blk/main.c     | 10 +++++++++-
 drivers/block/null_blk/null_blk.h |  1 +
 drivers/block/null_blk/zoned.c    | 20 +++++++++++++++++---
 3 files changed, 27 insertions(+), 4 deletions(-)

diff --git a/drivers/block/null_blk/main.c b/drivers/block/null_blk/main.c
index ed33cf7192d2..14e9aa867afe 100644
--- a/drivers/block/null_blk/main.c
+++ b/drivers/block/null_blk/main.c
@@ -253,6 +253,11 @@ static unsigned int g_zone_max_active;
 module_param_named(zone_max_active, g_zone_max_active, uint, 0444);
 MODULE_PARM_DESC(zone_max_active, "Maximum number of active zones when block device is zoned. Default: 0 (no limit)");
 
+static int g_zone_append_max_sectors = INT_MAX;
+module_param_named(zone_append_max_sectors, g_zone_append_max_sectors, int, 0444);
+MODULE_PARM_DESC(zone_append_max_sectors,
+		 "Maximum size of a zone append command (in 512B sectors). Specify 0 for zone append emulation");
+
 static struct nullb_device *null_alloc_dev(void);
 static void null_free_dev(struct nullb_device *dev);
 static void null_del_dev(struct nullb *nullb);
@@ -436,6 +441,7 @@ NULLB_DEVICE_ATTR(zone_capacity, ulong, NULL);
 NULLB_DEVICE_ATTR(zone_nr_conv, uint, NULL);
 NULLB_DEVICE_ATTR(zone_max_open, uint, NULL);
 NULLB_DEVICE_ATTR(zone_max_active, uint, NULL);
+NULLB_DEVICE_ATTR(zone_append_max_sectors, uint, NULL);
 NULLB_DEVICE_ATTR(virt_boundary, bool, NULL);
 NULLB_DEVICE_ATTR(no_sched, bool, NULL);
 NULLB_DEVICE_ATTR(shared_tags, bool, NULL);
@@ -580,6 +586,7 @@ static struct configfs_attribute *nullb_device_attrs[] = {
 	&nullb_device_attr_zone_nr_conv,
 	&nullb_device_attr_zone_max_open,
 	&nullb_device_attr_zone_max_active,
+	&nullb_device_attr_zone_append_max_sectors,
 	&nullb_device_attr_zone_readonly,
 	&nullb_device_attr_zone_offline,
 	&nullb_device_attr_virt_boundary,
@@ -671,7 +678,7 @@ static ssize_t memb_group_features_show(struct config_item *item, char *page)
 			"shared_tags,size,submit_queues,use_per_node_hctx,"
 			"virt_boundary,zoned,zone_capacity,zone_max_active,"
 			"zone_max_open,zone_nr_conv,zone_offline,zone_readonly,"
-			"zone_size\n");
+			"zone_size,zone_append_max_sectors\n");
 }
 
 CONFIGFS_ATTR_RO(memb_group_, features);
@@ -751,6 +758,7 @@ static struct nullb_device *null_alloc_dev(void)
 	dev->zone_nr_conv = g_zone_nr_conv;
 	dev->zone_max_open = g_zone_max_open;
 	dev->zone_max_active = g_zone_max_active;
+	dev->zone_append_max_sectors = g_zone_append_max_sectors;
 	dev->virt_boundary = g_virt_boundary;
 	dev->no_sched = g_no_sched;
 	dev->shared_tags = g_shared_tags;
diff --git a/drivers/block/null_blk/null_blk.h b/drivers/block/null_blk/null_blk.h
index 477b97746823..a9c5df650ddb 100644
--- a/drivers/block/null_blk/null_blk.h
+++ b/drivers/block/null_blk/null_blk.h
@@ -82,6 +82,7 @@ struct nullb_device {
 	unsigned int zone_nr_conv; /* number of conventional zones */
 	unsigned int zone_max_open; /* max number of open zones */
 	unsigned int zone_max_active; /* max number of active zones */
+	unsigned int zone_append_max_sectors; /* Max sectors per zone append command */
 	unsigned int submit_queues; /* number of submission queues */
 	unsigned int prev_submit_queues; /* number of submission queues before change */
 	unsigned int poll_queues; /* number of IOPOLL submission queues */
diff --git a/drivers/block/null_blk/zoned.c b/drivers/block/null_blk/zoned.c
index 8e217f8fadcd..0b2af273adaf 100644
--- a/drivers/block/null_blk/zoned.c
+++ b/drivers/block/null_blk/zoned.c
@@ -103,6 +103,11 @@ int null_init_zoned_dev(struct nullb_device *dev,
 			dev->zone_nr_conv);
 	}
 
+	dev->zone_append_max_sectors =
+		min(ALIGN_DOWN(dev->zone_append_max_sectors,
+			       dev->blocksize >> SECTOR_SHIFT),
+		    zone_capacity_sects);
+
 	/* Max active zones has to be < nbr of seq zones in order to be enforceable */
 	if (dev->zone_max_active >= dev->nr_zones - dev->zone_nr_conv) {
 		dev->zone_max_active = 0;
@@ -154,7 +159,7 @@ int null_init_zoned_dev(struct nullb_device *dev,
 
 	lim->zoned = true;
 	lim->chunk_sectors = dev->zone_size_sects;
-	lim->max_zone_append_sectors = dev->zone_size_sects;
+	lim->max_zone_append_sectors = dev->zone_append_max_sectors;
 	lim->max_open_zones = dev->zone_max_open;
 	lim->max_active_zones = dev->zone_max_active;
 	return 0;
@@ -163,10 +168,16 @@ int null_init_zoned_dev(struct nullb_device *dev,
 int null_register_zoned_dev(struct nullb *nullb)
 {
 	struct request_queue *q = nullb->q;
+	struct gendisk *disk = nullb->disk;
 
 	blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, q);
-	nullb->disk->nr_zones = bdev_nr_zones(nullb->disk->part0);
-	return blk_revalidate_disk_zones(nullb->disk, NULL);
+	disk->nr_zones = bdev_nr_zones(disk->part0);
+
+	pr_info("%s: using %s zone append\n",
+		disk->disk_name,
+		queue_emulates_zone_append(q) ? "emulated" : "native");
+
+	return blk_revalidate_disk_zones(disk, NULL);
 }
 
 void null_free_zoned_dev(struct nullb_device *dev)
@@ -365,6 +376,9 @@ static blk_status_t null_zone_write(struct nullb_cmd *cmd, sector_t sector,
 
 	trace_nullb_zone_op(cmd, zno, zone->cond);
 
+	if (WARN_ON_ONCE(append && !dev->zone_append_max_sectors))
+		return BLK_STS_IOERR;
+
 	if (zone->type == BLK_ZONE_TYPE_CONVENTIONAL) {
 		if (append)
 			return BLK_STS_IOERR;
-- 
2.44.0

[PATCH v7 17/28] null_blk: Introduce fua attribute

[Damien Le Moal]

Add the fua configfs attribute and module parameter to allow
configuring if the device supports FUA or not. Using this attribute
has an effect on the null_blk device only if memory backing is enabled
together with a write cache (cache_size option).

This new attribute allows configuring a null_blk device with a write
cache but without FUA support. This is convenient to test the block
layer flush machinery.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 drivers/block/null_blk/main.c     | 12 ++++++++++--
 drivers/block/null_blk/null_blk.h |  1 +
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/block/null_blk/main.c b/drivers/block/null_blk/main.c
index 14e9aa867afe..993e9e8a7e69 100644
--- a/drivers/block/null_blk/main.c
+++ b/drivers/block/null_blk/main.c
@@ -225,6 +225,10 @@ static unsigned long g_cache_size;
 module_param_named(cache_size, g_cache_size, ulong, 0444);
 MODULE_PARM_DESC(mbps, "Cache size in MiB for memory-backed device. Default: 0 (none)");
 
+static bool g_fua = true;
+module_param_named(fua, g_fua, bool, 0444);
+MODULE_PARM_DESC(zoned, "Enable/disable FUA support when cache_size is used. Default: true");
+
 static unsigned int g_mbps;
 module_param_named(mbps, g_mbps, uint, 0444);
 MODULE_PARM_DESC(mbps, "Limit maximum bandwidth (in MiB/s). Default: 0 (no limit)");
@@ -446,6 +450,7 @@ NULLB_DEVICE_ATTR(virt_boundary, bool, NULL);
 NULLB_DEVICE_ATTR(no_sched, bool, NULL);
 NULLB_DEVICE_ATTR(shared_tags, bool, NULL);
 NULLB_DEVICE_ATTR(shared_tag_bitmap, bool, NULL);
+NULLB_DEVICE_ATTR(fua, bool, NULL);
 
 static ssize_t nullb_device_power_show(struct config_item *item, char *page)
 {
@@ -593,6 +598,7 @@ static struct configfs_attribute *nullb_device_attrs[] = {
 	&nullb_device_attr_no_sched,
 	&nullb_device_attr_shared_tags,
 	&nullb_device_attr_shared_tag_bitmap,
+	&nullb_device_attr_fua,
 	NULL,
 };
 
@@ -671,7 +677,7 @@ nullb_group_drop_item(struct config_group *group, struct config_item *item)
 static ssize_t memb_group_features_show(struct config_item *item, char *page)
 {
 	return snprintf(page, PAGE_SIZE,
-			"badblocks,blocking,blocksize,cache_size,"
+			"badblocks,blocking,blocksize,cache_size,fua,"
 			"completion_nsec,discard,home_node,hw_queue_depth,"
 			"irqmode,max_sectors,mbps,memory_backed,no_sched,"
 			"poll_queues,power,queue_mode,shared_tag_bitmap,"
@@ -763,6 +769,8 @@ static struct nullb_device *null_alloc_dev(void)
 	dev->no_sched = g_no_sched;
 	dev->shared_tags = g_shared_tags;
 	dev->shared_tag_bitmap = g_shared_tag_bitmap;
+	dev->fua = g_fua;
+
 	return dev;
 }
 
@@ -1920,7 +1928,7 @@ static int null_add_dev(struct nullb_device *dev)
 
 	if (dev->cache_size > 0) {
 		set_bit(NULLB_DEV_FL_CACHE, &nullb->dev->flags);
-		blk_queue_write_cache(nullb->q, true, true);
+		blk_queue_write_cache(nullb->q, true, dev->fua);
 	}
 
 	nullb->q->queuedata = nullb;
diff --git a/drivers/block/null_blk/null_blk.h b/drivers/block/null_blk/null_blk.h
index a9c5df650ddb..3234e6c85eed 100644
--- a/drivers/block/null_blk/null_blk.h
+++ b/drivers/block/null_blk/null_blk.h
@@ -105,6 +105,7 @@ struct nullb_device {
 	bool no_sched; /* no IO scheduler for the device */
 	bool shared_tags; /* share tag set between devices for blk-mq */
 	bool shared_tag_bitmap; /* use hostwide shared tags */
+	bool fua; /* Support FUA */
 };
 
 struct nullb {
-- 
2.44.0

[PATCH v7 18/28] nvmet: zns: Do not reference the gendisk conv_zones_bitmap

[Damien Le Moal]

The gendisk conventional zone bitmap is going away. So to check for the
presence of conventional zones on a zoned target device, always use
report zones.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 drivers/nvme/target/zns.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/nvme/target/zns.c b/drivers/nvme/target/zns.c
index 3148d9f1bde6..0021d06041c1 100644
--- a/drivers/nvme/target/zns.c
+++ b/drivers/nvme/target/zns.c
@@ -52,14 +52,10 @@ bool nvmet_bdev_zns_enable(struct nvmet_ns *ns)
 	if (get_capacity(bd_disk) & (bdev_zone_sectors(ns->bdev) - 1))
 		return false;
 	/*
-	 * ZNS does not define a conventional zone type. If the underlying
-	 * device has a bitmap set indicating the existence of conventional
-	 * zones, reject the device. Otherwise, use report zones to detect if
-	 * the device has conventional zones.
+	 * ZNS does not define a conventional zone type. Use report zones
+	 * to detect if the device has conventional zones and reject it if
+	 * it does.
 	 */
-	if (ns->bdev->bd_disk->conv_zones_bitmap)
-		return false;
-
 	ret = blkdev_report_zones(ns->bdev, 0, bdev_nr_zones(ns->bdev),
 				  validate_conv_zones_cb, NULL);
 	if (ret < 0)
-- 
2.44.0

[PATCH v7 19/28] block: Remove BLK_STS_ZONE_RESOURCE

[Damien Le Moal]

The zone append emulation of the scsi disk driver was the only driver
using BLK_STS_ZONE_RESOURCE. With this code removed,
BLK_STS_ZONE_RESOURCE is now unused. Remove this macro definition and
simplify blk_mq_dispatch_rq_list() where this status code was handled.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 block/blk-mq.c            | 26 --------------------------
 drivers/scsi/scsi_lib.c   |  1 -
 include/linux/blk_types.h | 20 ++++----------------
 3 files changed, 4 insertions(+), 43 deletions(-)

diff --git a/block/blk-mq.c b/block/blk-mq.c
index 6f9cc1c4d4fb..9f2d9970eeba 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1921,19 +1921,6 @@ static void blk_mq_handle_dev_resource(struct request *rq,
 	__blk_mq_requeue_request(rq);
 }
 
-static void blk_mq_handle_zone_resource(struct request *rq,
-					struct list_head *zone_list)
-{
-	/*
-	 * If we end up here it is because we cannot dispatch a request to a
-	 * specific zone due to LLD level zone-write locking or other zone
-	 * related resource not being available. In this case, set the request
-	 * aside in zone_list for retrying it later.
-	 */
-	list_add(&rq->queuelist, zone_list);
-	__blk_mq_requeue_request(rq);
-}
-
 enum prep_dispatch {
 	PREP_DISPATCH_OK,
 	PREP_DISPATCH_NO_TAG,
@@ -2019,7 +2006,6 @@ bool blk_mq_dispatch_rq_list(struct blk_mq_hw_ctx *hctx, struct list_head *list,
 	struct request *rq;
 	int queued;
 	blk_status_t ret = BLK_STS_OK;
-	LIST_HEAD(zone_list);
 	bool needs_resource = false;
 
 	if (list_empty(list))
@@ -2061,23 +2047,11 @@ bool blk_mq_dispatch_rq_list(struct blk_mq_hw_ctx *hctx, struct list_head *list,
 		case BLK_STS_DEV_RESOURCE:
 			blk_mq_handle_dev_resource(rq, list);
 			goto out;
-		case BLK_STS_ZONE_RESOURCE:
-			/*
-			 * Move the request to zone_list and keep going through
-			 * the dispatch list to find more requests the drive can
-			 * accept.
-			 */
-			blk_mq_handle_zone_resource(rq, &zone_list);
-			needs_resource = true;
-			break;
 		default:
 			blk_mq_end_request(rq, ret);
 		}
 	} while (!list_empty(list));
 out:
-	if (!list_empty(&zone_list))
-		list_splice_tail_init(&zone_list, list);
-
 	/* If we didn't flush the entire list, we could have told the driver
 	 * there was more coming, but that turned out to be a lie.
 	 */
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 2e28e2360c85..9ca96116bd33 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1870,7 +1870,6 @@ static blk_status_t scsi_queue_rq(struct blk_mq_hw_ctx *hctx,
 	case BLK_STS_OK:
 		break;
 	case BLK_STS_RESOURCE:
-	case BLK_STS_ZONE_RESOURCE:
 		if (scsi_device_blocked(sdev))
 			ret = BLK_STS_DEV_RESOURCE;
 		break;
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 29b3170431e7..ffe0c112b128 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -136,18 +136,6 @@ typedef u16 blk_short_t;
  */
 #define BLK_STS_DEV_RESOURCE	((__force blk_status_t)13)
 
-/*
- * BLK_STS_ZONE_RESOURCE is returned from the driver to the block layer if zone
- * related resources are unavailable, but the driver can guarantee the queue
- * will be rerun in the future once the resources become available again.
- *
- * This is different from BLK_STS_DEV_RESOURCE in that it explicitly references
- * a zone specific resource and IO to a different zone on the same device could
- * still be served. Examples of that are zones that are write-locked, but a read
- * to the same zone could be served.
- */
-#define BLK_STS_ZONE_RESOURCE	((__force blk_status_t)14)
-
 /*
  * BLK_STS_ZONE_OPEN_RESOURCE is returned from the driver in the completion
  * path if the device returns a status indicating that too many zone resources
@@ -155,7 +143,7 @@ typedef u16 blk_short_t;
  * after the number of open zones decreases below the device's limits, which is
  * reported in the request_queue's max_open_zones.
  */
-#define BLK_STS_ZONE_OPEN_RESOURCE	((__force blk_status_t)15)
+#define BLK_STS_ZONE_OPEN_RESOURCE	((__force blk_status_t)14)
 
 /*
  * BLK_STS_ZONE_ACTIVE_RESOURCE is returned from the driver in the completion
@@ -164,20 +152,20 @@ typedef u16 blk_short_t;
  * after the number of active zones decreases below the device's limits, which
  * is reported in the request_queue's max_active_zones.
  */
-#define BLK_STS_ZONE_ACTIVE_RESOURCE	((__force blk_status_t)16)
+#define BLK_STS_ZONE_ACTIVE_RESOURCE	((__force blk_status_t)15)
 
 /*
  * BLK_STS_OFFLINE is returned from the driver when the target device is offline
  * or is being taken offline. This could help differentiate the case where a
  * device is intentionally being shut down from a real I/O error.
  */
-#define BLK_STS_OFFLINE		((__force blk_status_t)17)
+#define BLK_STS_OFFLINE		((__force blk_status_t)16)
 
 /*
  * BLK_STS_DURATION_LIMIT is returned from the driver when the target device
  * aborted the command because it exceeded one of its Command Duration Limits.
  */
-#define BLK_STS_DURATION_LIMIT	((__force blk_status_t)18)
+#define BLK_STS_DURATION_LIMIT	((__force blk_status_t)17)
 
 /**
  * blk_path_error - returns true if error may be path related
-- 
2.44.0

[PATCH v7 20/28] block: Simplify blk_revalidate_disk_zones() interface

[Damien Le Moal]

The only user of blk_revalidate_disk_zones() second argument was the
SCSI disk driver (sd). Now that this driver does not require this
update_driver_data argument, remove it to simplify the interface of
blk_revalidate_disk_zones(). Also update the function kdoc comment to
be more accurate (i.e. there is no gendisk ->revalidate method).

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 block/blk-zoned.c              | 21 +++++++--------------
 drivers/block/null_blk/zoned.c |  2 +-
 drivers/block/ublk_drv.c       |  2 +-
 drivers/block/virtio_blk.c     |  2 +-
 drivers/md/dm-zone.c           |  2 +-
 drivers/nvme/host/core.c       |  2 +-
 drivers/scsi/sd_zbc.c          |  2 +-
 include/linux/blkdev.h         |  3 +--
 8 files changed, 14 insertions(+), 22 deletions(-)

diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index da0fc7e2d00a..e46d23ad2fa9 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -1713,21 +1713,17 @@ static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
 /**
  * blk_revalidate_disk_zones - (re)allocate and initialize zone bitmaps
  * @disk:	Target disk
- * @update_driver_data:	Callback to update driver data on the frozen disk
  *
- * Helper function for low-level device drivers to check and (re) allocate and
- * initialize a disk request queue zone bitmaps. This functions should normally
- * be called within the disk ->revalidate method for blk-mq based drivers.
+ * Helper function for low-level device drivers to check, (re) allocate and
+ * initialize resources used for managing zoned disks. This function should
+ * normally be called by blk-mq based drivers when a zoned gendisk is probed
+ * and when the zone configuration of the gendisk changes (e.g. after a format).
  * Before calling this function, the device driver must already have set the
  * device zone size (chunk_sector limit) and the max zone append limit.
  * BIO based drivers can also use this function as long as the device queue
  * can be safely frozen.
- * If the @update_driver_data callback function is not NULL, the callback is
- * executed with the device request queue frozen after all zones have been
- * checked.
  */
-int blk_revalidate_disk_zones(struct gendisk *disk,
-			      void (*update_driver_data)(struct gendisk *disk))
+int blk_revalidate_disk_zones(struct gendisk *disk)
 {
 	struct request_queue *q = disk->queue;
 	sector_t zone_sectors = q->limits.chunk_sectors;
@@ -1794,13 +1790,10 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
 	 * referencing the bitmaps).
 	 */
 	blk_mq_freeze_queue(q);
-	if (ret > 0) {
+	if (ret > 0)
 		ret = disk_update_zone_resources(disk, &args);
-		if (update_driver_data)
-			update_driver_data(disk);
-	} else {
+	else
 		pr_warn("%s: failed to revalidate zones\n", disk->disk_name);
-	}
 	if (ret)
 		disk_free_zone_resources(disk);
 	blk_mq_unfreeze_queue(q);
diff --git a/drivers/block/null_blk/zoned.c b/drivers/block/null_blk/zoned.c
index 0b2af273adaf..4ddd84752557 100644
--- a/drivers/block/null_blk/zoned.c
+++ b/drivers/block/null_blk/zoned.c
@@ -177,7 +177,7 @@ int null_register_zoned_dev(struct nullb *nullb)
 		disk->disk_name,
 		queue_emulates_zone_append(q) ? "emulated" : "native");
 
-	return blk_revalidate_disk_zones(disk, NULL);
+	return blk_revalidate_disk_zones(disk);
 }
 
 void null_free_zoned_dev(struct nullb_device *dev)
diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index ab6af84e327c..851c78913de2 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -221,7 +221,7 @@ static int ublk_get_nr_zones(const struct ublk_device *ub)
 
 static int ublk_revalidate_disk_zones(struct ublk_device *ub)
 {
-	return blk_revalidate_disk_zones(ub->ub_disk, NULL);
+	return blk_revalidate_disk_zones(ub->ub_disk);
 }
 
 static int ublk_dev_param_zoned_validate(const struct ublk_device *ub)
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 42dea7601d87..c1af0a7d56c8 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -1543,7 +1543,7 @@ static int virtblk_probe(struct virtio_device *vdev)
 	 */
 	if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) && lim.zoned) {
 		blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, vblk->disk->queue);
-		err = blk_revalidate_disk_zones(vblk->disk, NULL);
+		err = blk_revalidate_disk_zones(vblk->disk);
 		if (err)
 			goto out_cleanup_disk;
 	}
diff --git a/drivers/md/dm-zone.c b/drivers/md/dm-zone.c
index 34769f3e3175..d17ae4486a6a 100644
--- a/drivers/md/dm-zone.c
+++ b/drivers/md/dm-zone.c
@@ -169,7 +169,7 @@ static int dm_revalidate_zones(struct mapped_device *md, struct dm_table *t)
 	 * our table for dm_blk_report_zones() to use directly.
 	 */
 	md->zone_revalidate_map = t;
-	ret = blk_revalidate_disk_zones(disk, NULL);
+	ret = blk_revalidate_disk_zones(disk);
 	md->zone_revalidate_map = NULL;
 
 	if (ret) {
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 27281a9a8951..8ae0a2dc5eda 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2153,7 +2153,7 @@ static int nvme_update_ns_info_block(struct nvme_ns *ns,
 	blk_mq_unfreeze_queue(ns->disk->queue);
 
 	if (blk_queue_is_zoned(ns->queue)) {
-		ret = blk_revalidate_disk_zones(ns->disk, NULL);
+		ret = blk_revalidate_disk_zones(ns->disk);
 		if (ret && !nvme_first_scan(ns->disk))
 			goto out;
 	}
diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index d0ead9858954..806036e48abe 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -572,7 +572,7 @@ int sd_zbc_revalidate_zones(struct scsi_disk *sdkp)
 	blk_queue_max_zone_append_sectors(q, 0);
 
 	flags = memalloc_noio_save();
-	ret = blk_revalidate_disk_zones(disk, NULL);
+	ret = blk_revalidate_disk_zones(disk);
 	memalloc_noio_restore(flags);
 	if (ret) {
 		sdkp->zone_info = (struct zoned_disk_info){ };
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 0b69027e1713..359e2b7d27fa 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -336,8 +336,7 @@ int blkdev_report_zones(struct block_device *bdev, sector_t sector,
 		unsigned int nr_zones, report_zones_cb cb, void *data);
 int blkdev_zone_mgmt(struct block_device *bdev, enum req_op op,
 		sector_t sectors, sector_t nr_sectors);
-int blk_revalidate_disk_zones(struct gendisk *disk,
-		void (*update_driver_data)(struct gendisk *disk));
+int blk_revalidate_disk_zones(struct gendisk *disk);
 
 /*
  * Independent access ranges: struct blk_independent_access_range describes
-- 
2.44.0

[PATCH v7 21/28] block: mq-deadline: Remove support for zone write locking

[Damien Le Moal]

With the block layer generic plugging of write operations for zoned
block devices, mq-deadline, or any other scheduler, can only ever
see at most one write operation per zone at any time. There is thus no
sequentiality requirements for these writes and thus no need to tightly
control the dispatching of write requests using zone write locking.

Remove all the code that implement this control in the mq-deadline
scheduler and remove advertizing support for the
ELEVATOR_F_ZBD_SEQ_WRITE elevator feature.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 block/mq-deadline.c | 176 ++------------------------------------------
 1 file changed, 6 insertions(+), 170 deletions(-)

diff --git a/block/mq-deadline.c b/block/mq-deadline.c
index 02a916ba62ee..dce8d746b5bd 100644
--- a/block/mq-deadline.c
+++ b/block/mq-deadline.c
@@ -102,7 +102,6 @@ struct deadline_data {
 	int prio_aging_expire;
 
 	spinlock_t lock;
-	spinlock_t zone_lock;
 };
 
 /* Maps an I/O priority class to a deadline scheduler priority. */
@@ -157,8 +156,7 @@ deadline_latter_request(struct request *rq)
 }
 
 /*
- * Return the first request for which blk_rq_pos() >= @pos. For zoned devices,
- * return the first request after the start of the zone containing @pos.
+ * Return the first request for which blk_rq_pos() >= @pos.
  */
 static inline struct request *deadline_from_pos(struct dd_per_prio *per_prio,
 				enum dd_data_dir data_dir, sector_t pos)
@@ -170,14 +168,6 @@ static inline struct request *deadline_from_pos(struct dd_per_prio *per_prio,
 		return NULL;
 
 	rq = rb_entry_rq(node);
-	/*
-	 * A zoned write may have been requeued with a starting position that
-	 * is below that of the most recently dispatched request. Hence, for
-	 * zoned writes, start searching from the start of a zone.
-	 */
-	if (blk_rq_is_seq_zoned_write(rq))
-		pos = round_down(pos, rq->q->limits.chunk_sectors);
-
 	while (node) {
 		rq = rb_entry_rq(node);
 		if (blk_rq_pos(rq) >= pos) {
@@ -308,36 +298,6 @@ static inline bool deadline_check_fifo(struct dd_per_prio *per_prio,
 	return time_is_before_eq_jiffies((unsigned long)rq->fifo_time);
 }
 
-/*
- * Check if rq has a sequential request preceding it.
- */
-static bool deadline_is_seq_write(struct deadline_data *dd, struct request *rq)
-{
-	struct request *prev = deadline_earlier_request(rq);
-
-	if (!prev)
-		return false;
-
-	return blk_rq_pos(prev) + blk_rq_sectors(prev) == blk_rq_pos(rq);
-}
-
-/*
- * Skip all write requests that are sequential from @rq, even if we cross
- * a zone boundary.
- */
-static struct request *deadline_skip_seq_writes(struct deadline_data *dd,
-						struct request *rq)
-{
-	sector_t pos = blk_rq_pos(rq);
-
-	do {
-		pos += blk_rq_sectors(rq);
-		rq = deadline_latter_request(rq);
-	} while (rq && blk_rq_pos(rq) == pos);
-
-	return rq;
-}
-
 /*
  * For the specified data direction, return the next request to
  * dispatch using arrival ordered lists.
@@ -346,40 +306,10 @@ static struct request *
 deadline_fifo_request(struct deadline_data *dd, struct dd_per_prio *per_prio,
 		      enum dd_data_dir data_dir)
 {
-	struct request *rq, *rb_rq, *next;
-	unsigned long flags;
-
 	if (list_empty(&per_prio->fifo_list[data_dir]))
 		return NULL;
 
-	rq = rq_entry_fifo(per_prio->fifo_list[data_dir].next);
-	if (data_dir == DD_READ || !blk_queue_is_zoned(rq->q))
-		return rq;
-
-	/*
-	 * Look for a write request that can be dispatched, that is one with
-	 * an unlocked target zone. For some HDDs, breaking a sequential
-	 * write stream can lead to lower throughput, so make sure to preserve
-	 * sequential write streams, even if that stream crosses into the next
-	 * zones and these zones are unlocked.
-	 */
-	spin_lock_irqsave(&dd->zone_lock, flags);
-	list_for_each_entry_safe(rq, next, &per_prio->fifo_list[DD_WRITE],
-				 queuelist) {
-		/* Check whether a prior request exists for the same zone. */
-		rb_rq = deadline_from_pos(per_prio, data_dir, blk_rq_pos(rq));
-		if (rb_rq && blk_rq_pos(rb_rq) < blk_rq_pos(rq))
-			rq = rb_rq;
-		if (blk_req_can_dispatch_to_zone(rq) &&
-		    (blk_queue_nonrot(rq->q) ||
-		     !deadline_is_seq_write(dd, rq)))
-			goto out;
-	}
-	rq = NULL;
-out:
-	spin_unlock_irqrestore(&dd->zone_lock, flags);
-
-	return rq;
+	return rq_entry_fifo(per_prio->fifo_list[data_dir].next);
 }
 
 /*
@@ -390,36 +320,8 @@ static struct request *
 deadline_next_request(struct deadline_data *dd, struct dd_per_prio *per_prio,
 		      enum dd_data_dir data_dir)
 {
-	struct request *rq;
-	unsigned long flags;
-
-	rq = deadline_from_pos(per_prio, data_dir,
-			       per_prio->latest_pos[data_dir]);
-	if (!rq)
-		return NULL;
-
-	if (data_dir == DD_READ || !blk_queue_is_zoned(rq->q))
-		return rq;
-
-	/*
-	 * Look for a write request that can be dispatched, that is one with
-	 * an unlocked target zone. For some HDDs, breaking a sequential
-	 * write stream can lead to lower throughput, so make sure to preserve
-	 * sequential write streams, even if that stream crosses into the next
-	 * zones and these zones are unlocked.
-	 */
-	spin_lock_irqsave(&dd->zone_lock, flags);
-	while (rq) {
-		if (blk_req_can_dispatch_to_zone(rq))
-			break;
-		if (blk_queue_nonrot(rq->q))
-			rq = deadline_latter_request(rq);
-		else
-			rq = deadline_skip_seq_writes(dd, rq);
-	}
-	spin_unlock_irqrestore(&dd->zone_lock, flags);
-
-	return rq;
+	return deadline_from_pos(per_prio, data_dir,
+				 per_prio->latest_pos[data_dir]);
 }
 
 /*
@@ -525,10 +427,6 @@ static struct request *__dd_dispatch_request(struct deadline_data *dd,
 		rq = next_rq;
 	}
 
-	/*
-	 * For a zoned block device, if we only have writes queued and none of
-	 * them can be dispatched, rq will be NULL.
-	 */
 	if (!rq)
 		return NULL;
 
@@ -549,10 +447,6 @@ static struct request *__dd_dispatch_request(struct deadline_data *dd,
 	prio = ioprio_class_to_prio[ioprio_class];
 	dd->per_prio[prio].latest_pos[data_dir] = blk_rq_pos(rq);
 	dd->per_prio[prio].stats.dispatched++;
-	/*
-	 * If the request needs its target zone locked, do it.
-	 */
-	blk_req_zone_write_lock(rq);
 	rq->rq_flags |= RQF_STARTED;
 	return rq;
 }
@@ -722,7 +616,6 @@ static int dd_init_sched(struct request_queue *q, struct elevator_type *e)
 	dd->fifo_batch = fifo_batch;
 	dd->prio_aging_expire = prio_aging_expire;
 	spin_lock_init(&dd->lock);
-	spin_lock_init(&dd->zone_lock);
 
 	/* We dispatch from request queue wide instead of hw queue */
 	blk_queue_flag_set(QUEUE_FLAG_SQ_SCHED, q);
@@ -804,12 +697,6 @@ static void dd_insert_request(struct blk_mq_hw_ctx *hctx, struct request *rq,
 
 	lockdep_assert_held(&dd->lock);
 
-	/*
-	 * This may be a requeue of a write request that has locked its
-	 * target zone. If it is the case, this releases the zone lock.
-	 */
-	blk_req_zone_write_unlock(rq);
-
 	prio = ioprio_class_to_prio[ioprio_class];
 	per_prio = &dd->per_prio[prio];
 	if (!rq->elv.priv[0]) {
@@ -841,18 +728,6 @@ static void dd_insert_request(struct blk_mq_hw_ctx *hctx, struct request *rq,
 		 */
 		rq->fifo_time = jiffies + dd->fifo_expire[data_dir];
 		insert_before = &per_prio->fifo_list[data_dir];
-#ifdef CONFIG_BLK_DEV_ZONED
-		/*
-		 * Insert zoned writes such that requests are sorted by
-		 * position per zone.
-		 */
-		if (blk_rq_is_seq_zoned_write(rq)) {
-			struct request *rq2 = deadline_latter_request(rq);
-
-			if (rq2 && blk_rq_zone_no(rq2) == blk_rq_zone_no(rq))
-				insert_before = &rq2->queuelist;
-		}
-#endif
 		list_add_tail(&rq->queuelist, insert_before);
 	}
 }
@@ -887,33 +762,8 @@ static void dd_prepare_request(struct request *rq)
 	rq->elv.priv[0] = NULL;
 }
 
-static bool dd_has_write_work(struct blk_mq_hw_ctx *hctx)
-{
-	struct deadline_data *dd = hctx->queue->elevator->elevator_data;
-	enum dd_prio p;
-
-	for (p = 0; p <= DD_PRIO_MAX; p++)
-		if (!list_empty_careful(&dd->per_prio[p].fifo_list[DD_WRITE]))
-			return true;
-
-	return false;
-}
-
 /*
  * Callback from inside blk_mq_free_request().
- *
- * For zoned block devices, write unlock the target zone of
- * completed write requests. Do this while holding the zone lock
- * spinlock so that the zone is never unlocked while deadline_fifo_request()
- * or deadline_next_request() are executing. This function is called for
- * all requests, whether or not these requests complete successfully.
- *
- * For a zoned block device, __dd_dispatch_request() may have stopped
- * dispatching requests if all the queued requests are write requests directed
- * at zones that are already locked due to on-going write requests. To ensure
- * write request dispatch progress in this case, mark the queue as needing a
- * restart to ensure that the queue is run again after completion of the
- * request and zones being unlocked.
  */
 static void dd_finish_request(struct request *rq)
 {
@@ -928,21 +778,8 @@ static void dd_finish_request(struct request *rq)
 	 * called dd_insert_requests(). Skip requests that bypassed I/O
 	 * scheduling. See also blk_mq_request_bypass_insert().
 	 */
-	if (!rq->elv.priv[0])
-		return;
-
-	atomic_inc(&per_prio->stats.completed);
-
-	if (blk_queue_is_zoned(q)) {
-		unsigned long flags;
-
-		spin_lock_irqsave(&dd->zone_lock, flags);
-		blk_req_zone_write_unlock(rq);
-		spin_unlock_irqrestore(&dd->zone_lock, flags);
-
-		if (dd_has_write_work(rq->mq_hctx))
-			blk_mq_sched_mark_restart_hctx(rq->mq_hctx);
-	}
+	if (rq->elv.priv[0])
+		atomic_inc(&per_prio->stats.completed);
 }
 
 static bool dd_has_work_for_prio(struct dd_per_prio *per_prio)
@@ -1266,7 +1103,6 @@ static struct elevator_type mq_deadline = {
 	.elevator_attrs = deadline_attrs,
 	.elevator_name = "mq-deadline",
 	.elevator_alias = "deadline",
-	.elevator_features = ELEVATOR_F_ZBD_SEQ_WRITE,
 	.elevator_owner = THIS_MODULE,
 };
 MODULE_ALIAS("mq-deadline-iosched");
-- 
2.44.0

[PATCH v7 22/28] block: Remove elevator required features

[Damien Le Moal]

The only elevator feature ever implemented is ELEVATOR_F_ZBD_SEQ_WRITE
for signaling that a scheduler implements zone write locking to tightly
control the dispatching order of write operations to zoned block
devices. With the removal of zone write locking support in mq-deadline
and the reliance of all block device drivers on the block layer zone
write plugging to control ordering of write operations to zones, the
elevator feature ELEVATOR_F_ZBD_SEQ_WRITE is completely unused.
Remove it, and also remove the now unused code for filtering the
possible schedulers for a block device based on required features.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 block/blk-settings.c   | 16 ---------------
 block/elevator.c       | 46 +++++-------------------------------------
 block/elevator.h       |  1 -
 include/linux/blkdev.h | 10 ---------
 4 files changed, 5 insertions(+), 68 deletions(-)

diff --git a/block/blk-settings.c b/block/blk-settings.c
index c0197e1e7485..715f4b6356c4 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -1052,22 +1052,6 @@ void blk_queue_write_cache(struct request_queue *q, bool wc, bool fua)
 }
 EXPORT_SYMBOL_GPL(blk_queue_write_cache);
 
-/**
- * blk_queue_required_elevator_features - Set a queue required elevator features
- * @q:		the request queue for the target device
- * @features:	Required elevator features OR'ed together
- *
- * Tell the block layer that for the device controlled through @q, only the
- * only elevators that can be used are those that implement at least the set of
- * features specified by @features.
- */
-void blk_queue_required_elevator_features(struct request_queue *q,
-					  unsigned int features)
-{
-	q->required_elevator_features = features;
-}
-EXPORT_SYMBOL_GPL(blk_queue_required_elevator_features);
-
 /**
  * blk_queue_can_use_dma_map_merging - configure queue for merging segments.
  * @q:		the request queue for the device
diff --git a/block/elevator.c b/block/elevator.c
index 5ff093cb3cf8..f64ebd726e58 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -83,13 +83,6 @@ bool elv_bio_merge_ok(struct request *rq, struct bio *bio)
 }
 EXPORT_SYMBOL(elv_bio_merge_ok);
 
-static inline bool elv_support_features(struct request_queue *q,
-		const struct elevator_type *e)
-{
-	return (q->required_elevator_features & e->elevator_features) ==
-		q->required_elevator_features;
-}
-
 /**
  * elevator_match - Check whether @e's name or alias matches @name
  * @e: Scheduler to test
@@ -120,7 +113,7 @@ static struct elevator_type *elevator_find_get(struct request_queue *q,
 
 	spin_lock(&elv_list_lock);
 	e = __elevator_find(name);
-	if (e && (!elv_support_features(q, e) || !elevator_tryget(e)))
+	if (e && (!elevator_tryget(e)))
 		e = NULL;
 	spin_unlock(&elv_list_lock);
 	return e;
@@ -580,34 +573,8 @@ static struct elevator_type *elevator_get_default(struct request_queue *q)
 }
 
 /*
- * Get the first elevator providing the features required by the request queue.
- * Default to "none" if no matching elevator is found.
- */
-static struct elevator_type *elevator_get_by_features(struct request_queue *q)
-{
-	struct elevator_type *e, *found = NULL;
-
-	spin_lock(&elv_list_lock);
-
-	list_for_each_entry(e, &elv_list, list) {
-		if (elv_support_features(q, e)) {
-			found = e;
-			break;
-		}
-	}
-
-	if (found && !elevator_tryget(found))
-		found = NULL;
-
-	spin_unlock(&elv_list_lock);
-	return found;
-}
-
-/*
- * For a device queue that has no required features, use the default elevator
- * settings. Otherwise, use the first elevator available matching the required
- * features. If no suitable elevator is find or if the chosen elevator
- * initialization fails, fall back to the "none" elevator (no elevator).
+ * Use the default elevator settings. If the chosen elevator initialization
+ * fails, fall back to the "none" elevator (no elevator).
  */
 void elevator_init_mq(struct request_queue *q)
 {
@@ -622,10 +589,7 @@ void elevator_init_mq(struct request_queue *q)
 	if (unlikely(q->elevator))
 		return;
 
-	if (!q->required_elevator_features)
-		e = elevator_get_default(q);
-	else
-		e = elevator_get_by_features(q);
+	e = elevator_get_default(q);
 	if (!e)
 		return;
 
@@ -781,7 +745,7 @@ ssize_t elv_iosched_show(struct request_queue *q, char *name)
 	list_for_each_entry(e, &elv_list, list) {
 		if (e == cur)
 			len += sprintf(name+len, "[%s] ", e->elevator_name);
-		else if (elv_support_features(q, e))
+		else
 			len += sprintf(name+len, "%s ", e->elevator_name);
 	}
 	spin_unlock(&elv_list_lock);
diff --git a/block/elevator.h b/block/elevator.h
index 7ca3d7b6ed82..e9a050a96e53 100644
--- a/block/elevator.h
+++ b/block/elevator.h
@@ -74,7 +74,6 @@ struct elevator_type
 	struct elv_fs_entry *elevator_attrs;
 	const char *elevator_name;
 	const char *elevator_alias;
-	const unsigned int elevator_features;
 	struct module *elevator_owner;
 #ifdef CONFIG_BLK_DEBUG_FS
 	const struct blk_mq_debugfs_attr *queue_debugfs_attrs;
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 359e2b7d27fa..4459a6033c6c 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -453,8 +453,6 @@ struct request_queue {
 
 	atomic_t		nr_active_requests_shared_tags;
 
-	unsigned int		required_elevator_features;
-
 	struct blk_mq_tags	*sched_shared_tags;
 
 	struct list_head	icq_list;
@@ -958,14 +956,6 @@ disk_alloc_independent_access_ranges(struct gendisk *disk, int nr_ia_ranges);
 void disk_set_independent_access_ranges(struct gendisk *disk,
 				struct blk_independent_access_ranges *iars);
 
-/*
- * Elevator features for blk_queue_required_elevator_features:
- */
-/* Supports zoned block devices sequential write constraint */
-#define ELEVATOR_F_ZBD_SEQ_WRITE	(1U << 0)
-
-extern void blk_queue_required_elevator_features(struct request_queue *q,
-						 unsigned int features);
 extern bool blk_queue_can_use_dma_map_merging(struct request_queue *q,
 					      struct device *dev);
 
-- 
2.44.0

[PATCH v7 23/28] block: Do not check zone type in blk_check_zone_append()

[Damien Le Moal]

Zone append operations are only allowed to target sequential write
required zones. blk_check_zone_append() uses bio_zone_is_seq() to check
this. However, this check is not necessary because:
1) For NVMe ZNS namespace devices, only sequential write required zones
   exist, making the zone type check useless.
2) For null_blk, the driver will fail the request anyway, thus notifying
   the user that a conventional zone was targeted.
3) For all other zoned devices, zone append is now emulated using zone
   write plugging, which checks that a zone append operation does not
   target a conventional zone.

In preparation for the removal of zone write locking and its
conventional zone bitmap (used by bio_zone_is_seq()), remove the
bio_zone_is_seq() call from blk_check_zone_append().

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 block/blk-core.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/block/blk-core.c b/block/blk-core.c
index 3bf28149e104..e1a5344c2257 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -589,8 +589,7 @@ static inline blk_status_t blk_check_zone_append(struct request_queue *q,
 		return BLK_STS_NOTSUPP;
 
 	/* The bio sector must point to the start of a sequential zone */
-	if (!bdev_is_zone_start(bio->bi_bdev, bio->bi_iter.bi_sector) ||
-	    !bio_zone_is_seq(bio))
+	if (!bdev_is_zone_start(bio->bi_bdev, bio->bi_iter.bi_sector))
 		return BLK_STS_IOERR;
 
 	/*
-- 
2.44.0

[PATCH v7 24/28] block: Move zone related debugfs attribute to blk-zoned.c

[Damien Le Moal]

block/blk-mq-debugfs-zone.c contains a single debugfs attribute
function. Defining this outside of block/blk-zoned.c does not really
help in any way, so move this zone related debugfs attribute to
block/blk-zoned.c and delete block/blk-mq-debugfs-zone.c.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 block/Kconfig                |  4 ----
 block/Makefile               |  1 -
 block/blk-mq-debugfs-zoned.c | 22 ----------------------
 block/blk-mq-debugfs.h       |  2 +-
 block/blk-zoned.c            | 20 ++++++++++++++++++++
 5 files changed, 21 insertions(+), 28 deletions(-)
 delete mode 100644 block/blk-mq-debugfs-zoned.c

diff --git a/block/Kconfig b/block/Kconfig
index 1de4682d48cc..9f647149fbee 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -198,10 +198,6 @@ config BLK_DEBUG_FS
 	Unless you are building a kernel for a tiny system, you should
 	say Y here.
 
-config BLK_DEBUG_FS_ZONED
-       bool
-       default BLK_DEBUG_FS && BLK_DEV_ZONED
-
 config BLK_SED_OPAL
 	bool "Logic for interfacing with Opal enabled SEDs"
 	depends on KEYS
diff --git a/block/Makefile b/block/Makefile
index 46ada9dc8bbf..168150b9c510 100644
--- a/block/Makefile
+++ b/block/Makefile
@@ -33,7 +33,6 @@ obj-$(CONFIG_BLK_MQ_VIRTIO)	+= blk-mq-virtio.o
 obj-$(CONFIG_BLK_DEV_ZONED)	+= blk-zoned.o
 obj-$(CONFIG_BLK_WBT)		+= blk-wbt.o
 obj-$(CONFIG_BLK_DEBUG_FS)	+= blk-mq-debugfs.o
-obj-$(CONFIG_BLK_DEBUG_FS_ZONED)+= blk-mq-debugfs-zoned.o
 obj-$(CONFIG_BLK_SED_OPAL)	+= sed-opal.o
 obj-$(CONFIG_BLK_PM)		+= blk-pm.o
 obj-$(CONFIG_BLK_INLINE_ENCRYPTION)	+= blk-crypto.o blk-crypto-profile.o \
diff --git a/block/blk-mq-debugfs-zoned.c b/block/blk-mq-debugfs-zoned.c
deleted file mode 100644
index a77b099c34b7..000000000000
--- a/block/blk-mq-debugfs-zoned.c
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 Western Digital Corporation or its affiliates.
- */
-
-#include <linux/blkdev.h>
-#include "blk-mq-debugfs.h"
-
-int queue_zone_wlock_show(void *data, struct seq_file *m)
-{
-	struct request_queue *q = data;
-	unsigned int i;
-
-	if (!q->disk->seq_zones_wlock)
-		return 0;
-
-	for (i = 0; i < q->disk->nr_zones; i++)
-		if (test_bit(i, q->disk->seq_zones_wlock))
-			seq_printf(m, "%u\n", i);
-
-	return 0;
-}
diff --git a/block/blk-mq-debugfs.h b/block/blk-mq-debugfs.h
index 9c7d4b6117d4..3ebe2c29b624 100644
--- a/block/blk-mq-debugfs.h
+++ b/block/blk-mq-debugfs.h
@@ -83,7 +83,7 @@ static inline void blk_mq_debugfs_unregister_rqos(struct rq_qos *rqos)
 }
 #endif
 
-#ifdef CONFIG_BLK_DEBUG_FS_ZONED
+#if defined(CONFIG_BLK_DEV_ZONED) && defined(CONFIG_BLK_DEBUG_FS)
 int queue_zone_wlock_show(void *data, struct seq_file *m);
 #else
 static inline int queue_zone_wlock_show(void *data, struct seq_file *m)
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index e46d23ad2fa9..a06d7f7a54c7 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -23,6 +23,7 @@
 
 #include "blk.h"
 #include "blk-mq-sched.h"
+#include "blk-mq-debugfs.h"
 
 #define ZONE_COND_NAME(name) [BLK_ZONE_COND_##name] = #name
 static const char *const zone_cond_name[] = {
@@ -1804,3 +1805,22 @@ int blk_revalidate_disk_zones(struct gendisk *disk)
 	return ret;
 }
 EXPORT_SYMBOL_GPL(blk_revalidate_disk_zones);
+
+#ifdef CONFIG_BLK_DEBUG_FS
+
+int queue_zone_wlock_show(void *data, struct seq_file *m)
+{
+	struct request_queue *q = data;
+	unsigned int i;
+
+	if (!q->disk->seq_zones_wlock)
+		return 0;
+
+	for (i = 0; i < q->disk->nr_zones; i++)
+		if (test_bit(i, q->disk->seq_zones_wlock))
+			seq_printf(m, "%u\n", i);
+
+	return 0;
+}
+
+#endif
-- 
2.44.0

[PATCH v7 25/28] block: Replace zone_wlock debugfs entry with zone_wplugs entry

[Damien Le Moal]

In preparation to completely remove zone write locking, replace the
"zone_wlock" mq-debugfs entry that was listing zones that are
write-locked with the zone_wplugs entry which lists the zones that
currently have a write plug allocated.

The write plug information provided is: the zone number, the zone write
plug flags, the zone write plug write pointer offset and the number of
BIOs currently waiting for execution in the zone write plug BIO list.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 block/blk-mq-debugfs.c |  2 +-
 block/blk-mq-debugfs.h |  4 ++--
 block/blk-zoned.c      | 31 ++++++++++++++++++++++++-------
 3 files changed, 27 insertions(+), 10 deletions(-)

diff --git a/block/blk-mq-debugfs.c b/block/blk-mq-debugfs.c
index 94668e72ab09..ca1f2b9422d5 100644
--- a/block/blk-mq-debugfs.c
+++ b/block/blk-mq-debugfs.c
@@ -160,7 +160,7 @@ static const struct blk_mq_debugfs_attr blk_mq_debugfs_queue_attrs[] = {
 	{ "requeue_list", 0400, .seq_ops = &queue_requeue_list_seq_ops },
 	{ "pm_only", 0600, queue_pm_only_show, NULL },
 	{ "state", 0600, queue_state_show, queue_state_write },
-	{ "zone_wlock", 0400, queue_zone_wlock_show, NULL },
+	{ "zone_wplugs", 0400, queue_zone_wplugs_show, NULL },
 	{ },
 };
 
diff --git a/block/blk-mq-debugfs.h b/block/blk-mq-debugfs.h
index 3ebe2c29b624..c80e453e3014 100644
--- a/block/blk-mq-debugfs.h
+++ b/block/blk-mq-debugfs.h
@@ -84,9 +84,9 @@ static inline void blk_mq_debugfs_unregister_rqos(struct rq_qos *rqos)
 #endif
 
 #if defined(CONFIG_BLK_DEV_ZONED) && defined(CONFIG_BLK_DEBUG_FS)
-int queue_zone_wlock_show(void *data, struct seq_file *m);
+int queue_zone_wplugs_show(void *data, struct seq_file *m);
 #else
-static inline int queue_zone_wlock_show(void *data, struct seq_file *m)
+static inline int queue_zone_wplugs_show(void *data, struct seq_file *m)
 {
 	return 0;
 }
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index a06d7f7a54c7..44699b431ad0 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -1808,17 +1808,34 @@ EXPORT_SYMBOL_GPL(blk_revalidate_disk_zones);
 
 #ifdef CONFIG_BLK_DEBUG_FS
 
-int queue_zone_wlock_show(void *data, struct seq_file *m)
+int queue_zone_wplugs_show(void *data, struct seq_file *m)
 {
 	struct request_queue *q = data;
-	unsigned int i;
+	struct gendisk *disk = q->disk;
+	struct blk_zone_wplug *zwplug;
+	unsigned int zwp_wp_offset, zwp_flags;
+	unsigned int zwp_zone_no, zwp_ref;
+	unsigned int zwp_bio_list_size, i;
+	unsigned long flags;
 
-	if (!q->disk->seq_zones_wlock)
-		return 0;
+	rcu_read_lock();
+	for (i = 0; i < disk_zone_wplugs_hash_size(disk); i++) {
+		hlist_for_each_entry_rcu(zwplug,
+					 &disk->zone_wplugs_hash[i], node) {
+			spin_lock_irqsave(&zwplug->lock, flags);
+			zwp_zone_no = zwplug->zone_no;
+			zwp_flags = zwplug->flags;
+			zwp_ref = atomic_read(&zwplug->ref);
+			zwp_wp_offset = zwplug->wp_offset;
+			zwp_bio_list_size = bio_list_size(&zwplug->bio_list);
+			spin_unlock_irqrestore(&zwplug->lock, flags);
 
-	for (i = 0; i < q->disk->nr_zones; i++)
-		if (test_bit(i, q->disk->seq_zones_wlock))
-			seq_printf(m, "%u\n", i);
+			seq_printf(m, "%u 0x%x %u %u %u\n",
+				   zwp_zone_no, zwp_flags, zwp_ref,
+				   zwp_wp_offset, zwp_bio_list_size);
+		}
+	}
+	rcu_read_unlock();
 
 	return 0;
 }
-- 
2.44.0

[PATCH v7 26/28] block: Remove zone write locking

[Damien Le Moal]

Zone write locking is now unused and replaced with zone write plugging.
Remove all code that was implementing zone write locking, that is, the
various helper functions controlling request zone write locking and
the gendisk attached zone bitmaps.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 block/blk-mq-debugfs.c    |  1 -
 block/blk-zoned.c         | 66 ++-----------------------------
 include/linux/blk-mq.h    | 83 ---------------------------------------
 include/linux/blk_types.h |  1 -
 include/linux/blkdev.h    | 35 ++---------------
 5 files changed, 7 insertions(+), 179 deletions(-)

diff --git a/block/blk-mq-debugfs.c b/block/blk-mq-debugfs.c
index ca1f2b9422d5..770c0c2b72fa 100644
--- a/block/blk-mq-debugfs.c
+++ b/block/blk-mq-debugfs.c
@@ -256,7 +256,6 @@ static const char *const rqf_name[] = {
 	RQF_NAME(HASHED),
 	RQF_NAME(STATS),
 	RQF_NAME(SPECIAL_PAYLOAD),
-	RQF_NAME(ZONE_WRITE_LOCKED),
 	RQF_NAME(TIMED_OUT),
 	RQF_NAME(RESV),
 };
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index 44699b431ad0..3befebe6b319 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -115,52 +115,6 @@ const char *blk_zone_cond_str(enum blk_zone_cond zone_cond)
 }
 EXPORT_SYMBOL_GPL(blk_zone_cond_str);
 
-/*
- * Return true if a request is a write requests that needs zone write locking.
- */
-bool blk_req_needs_zone_write_lock(struct request *rq)
-{
-	if (!rq->q->disk->seq_zones_wlock)
-		return false;
-
-	return blk_rq_is_seq_zoned_write(rq);
-}
-EXPORT_SYMBOL_GPL(blk_req_needs_zone_write_lock);
-
-bool blk_req_zone_write_trylock(struct request *rq)
-{
-	unsigned int zno = blk_rq_zone_no(rq);
-
-	if (test_and_set_bit(zno, rq->q->disk->seq_zones_wlock))
-		return false;
-
-	WARN_ON_ONCE(rq->rq_flags & RQF_ZONE_WRITE_LOCKED);
-	rq->rq_flags |= RQF_ZONE_WRITE_LOCKED;
-
-	return true;
-}
-EXPORT_SYMBOL_GPL(blk_req_zone_write_trylock);
-
-void __blk_req_zone_write_lock(struct request *rq)
-{
-	if (WARN_ON_ONCE(test_and_set_bit(blk_rq_zone_no(rq),
-					  rq->q->disk->seq_zones_wlock)))
-		return;
-
-	WARN_ON_ONCE(rq->rq_flags & RQF_ZONE_WRITE_LOCKED);
-	rq->rq_flags |= RQF_ZONE_WRITE_LOCKED;
-}
-EXPORT_SYMBOL_GPL(__blk_req_zone_write_lock);
-
-void __blk_req_zone_write_unlock(struct request *rq)
-{
-	rq->rq_flags &= ~RQF_ZONE_WRITE_LOCKED;
-	if (rq->q->disk->seq_zones_wlock)
-		WARN_ON_ONCE(!test_and_clear_bit(blk_rq_zone_no(rq),
-						 rq->q->disk->seq_zones_wlock));
-}
-EXPORT_SYMBOL_GPL(__blk_req_zone_write_unlock);
-
 /**
  * bdev_nr_zones - Get number of zones
  * @bdev:	Target device
@@ -1506,9 +1460,6 @@ void disk_free_zone_resources(struct gendisk *disk)
 
 	kfree(disk->conv_zones_bitmap);
 	disk->conv_zones_bitmap = NULL;
-	kfree(disk->seq_zones_wlock);
-	disk->seq_zones_wlock = NULL;
-
 	disk->zone_capacity = 0;
 	disk->nr_zones = 0;
 }
@@ -1556,7 +1507,6 @@ static int disk_revalidate_zone_resources(struct gendisk *disk,
 struct blk_revalidate_zone_args {
 	struct gendisk	*disk;
 	unsigned long	*conv_zones_bitmap;
-	unsigned long	*seq_zones_wlock;
 	unsigned int	nr_zones;
 	unsigned int	zone_capacity;
 	sector_t	sector;
@@ -1574,7 +1524,6 @@ static int disk_update_zone_resources(struct gendisk *disk,
 
 	disk->nr_zones = args->nr_zones;
 	disk->zone_capacity = args->zone_capacity;
-	swap(disk->seq_zones_wlock, args->seq_zones_wlock);
 	swap(disk->conv_zones_bitmap, args->conv_zones_bitmap);
 
 	/*
@@ -1664,13 +1613,6 @@ static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
 		set_bit(idx, args->conv_zones_bitmap);
 		break;
 	case BLK_ZONE_TYPE_SEQWRITE_REQ:
-		if (!args->seq_zones_wlock) {
-			args->seq_zones_wlock =
-				blk_alloc_zone_bitmap(q->node, args->nr_zones);
-			if (!args->seq_zones_wlock)
-				return -ENOMEM;
-		}
-
 		/*
 		 * Remember the capacity of the first sequential zone and check
 		 * if it is constant for all zones.
@@ -1712,7 +1654,7 @@ static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
 }
 
 /**
- * blk_revalidate_disk_zones - (re)allocate and initialize zone bitmaps
+ * blk_revalidate_disk_zones - (re)allocate and initialize zone write plugs
  * @disk:	Target disk
  *
  * Helper function for low-level device drivers to check, (re) allocate and
@@ -1786,9 +1728,8 @@ int blk_revalidate_disk_zones(struct gendisk *disk)
 	}
 
 	/*
-	 * Install the new bitmaps and update nr_zones only once the queue is
-	 * stopped and all I/Os are completed (i.e. a scheduler is not
-	 * referencing the bitmaps).
+	 * Set the new disk zone parameters only once the queue is frozen and
+	 * all I/Os are completed.
 	 */
 	blk_mq_freeze_queue(q);
 	if (ret > 0)
@@ -1799,7 +1740,6 @@ int blk_revalidate_disk_zones(struct gendisk *disk)
 		disk_free_zone_resources(disk);
 	blk_mq_unfreeze_queue(q);
 
-	kfree(args.seq_zones_wlock);
 	kfree(args.conv_zones_bitmap);
 
 	return ret;
diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h
index 60090c8366fb..89ba6b16fe8b 100644
--- a/include/linux/blk-mq.h
+++ b/include/linux/blk-mq.h
@@ -54,8 +54,6 @@ typedef __u32 __bitwise req_flags_t;
 /* Look at ->special_vec for the actual data payload instead of the
    bio chain. */
 #define RQF_SPECIAL_PAYLOAD	((__force req_flags_t)(1 << 18))
-/* The per-zone write lock is held for this request */
-#define RQF_ZONE_WRITE_LOCKED	((__force req_flags_t)(1 << 19))
 /* The request completion needs to be signaled to zone write pluging. */
 #define RQF_ZONE_WRITE_PLUGGING	((__force req_flags_t)(1 << 20))
 /* ->timeout has been called, don't expire again */
@@ -1152,85 +1150,4 @@ static inline int blk_rq_map_sg(struct request_queue *q, struct request *rq,
 }
 void blk_dump_rq_flags(struct request *, char *);
 
-#ifdef CONFIG_BLK_DEV_ZONED
-static inline unsigned int blk_rq_zone_no(struct request *rq)
-{
-	return disk_zone_no(rq->q->disk, blk_rq_pos(rq));
-}
-
-static inline unsigned int blk_rq_zone_is_seq(struct request *rq)
-{
-	return disk_zone_is_seq(rq->q->disk, blk_rq_pos(rq));
-}
-
-/**
- * blk_rq_is_seq_zoned_write() - Check if @rq requires write serialization.
- * @rq: Request to examine.
- *
- * Note: REQ_OP_ZONE_APPEND requests do not require serialization.
- */
-static inline bool blk_rq_is_seq_zoned_write(struct request *rq)
-{
-	return op_needs_zoned_write_locking(req_op(rq)) &&
-		blk_rq_zone_is_seq(rq);
-}
-
-bool blk_req_needs_zone_write_lock(struct request *rq);
-bool blk_req_zone_write_trylock(struct request *rq);
-void __blk_req_zone_write_lock(struct request *rq);
-void __blk_req_zone_write_unlock(struct request *rq);
-
-static inline void blk_req_zone_write_lock(struct request *rq)
-{
-	if (blk_req_needs_zone_write_lock(rq))
-		__blk_req_zone_write_lock(rq);
-}
-
-static inline void blk_req_zone_write_unlock(struct request *rq)
-{
-	if (rq->rq_flags & RQF_ZONE_WRITE_LOCKED)
-		__blk_req_zone_write_unlock(rq);
-}
-
-static inline bool blk_req_zone_is_write_locked(struct request *rq)
-{
-	return rq->q->disk->seq_zones_wlock &&
-		test_bit(blk_rq_zone_no(rq), rq->q->disk->seq_zones_wlock);
-}
-
-static inline bool blk_req_can_dispatch_to_zone(struct request *rq)
-{
-	if (!blk_req_needs_zone_write_lock(rq))
-		return true;
-	return !blk_req_zone_is_write_locked(rq);
-}
-#else /* CONFIG_BLK_DEV_ZONED */
-static inline bool blk_rq_is_seq_zoned_write(struct request *rq)
-{
-	return false;
-}
-
-static inline bool blk_req_needs_zone_write_lock(struct request *rq)
-{
-	return false;
-}
-
-static inline void blk_req_zone_write_lock(struct request *rq)
-{
-}
-
-static inline void blk_req_zone_write_unlock(struct request *rq)
-{
-}
-static inline bool blk_req_zone_is_write_locked(struct request *rq)
-{
-	return false;
-}
-
-static inline bool blk_req_can_dispatch_to_zone(struct request *rq)
-{
-	return true;
-}
-#endif /* CONFIG_BLK_DEV_ZONED */
-
 #endif /* BLK_MQ_H */
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index ffe0c112b128..5751292fee6a 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -297,7 +297,6 @@ enum {
 	BIO_QOS_THROTTLED,	/* bio went through rq_qos throttle path */
 	BIO_QOS_MERGED,		/* but went through rq_qos merge path */
 	BIO_REMAPPED,
-	BIO_ZONE_WRITE_LOCKED,	/* Owns a zoned device zone write lock */
 	BIO_ZONE_WRITE_PLUGGING, /* bio handled through zone write plugging */
 	BIO_EMULATES_ZONE_APPEND, /* bio emulates a zone append operation */
 	BIO_FLAG_LAST
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 4459a6033c6c..5a6e05df2554 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -177,23 +177,14 @@ struct gendisk {
 
 #ifdef CONFIG_BLK_DEV_ZONED
 	/*
-	 * Zoned block device information for request dispatch control.
-	 * nr_zones is the total number of zones of the device. This is always
-	 * 0 for regular block devices. conv_zones_bitmap is a bitmap of nr_zones
-	 * bits which indicates if a zone is conventional (bit set) or
-	 * sequential (bit clear). seq_zones_wlock is a bitmap of nr_zones
-	 * bits which indicates if a zone is write locked, that is, if a write
-	 * request targeting the zone was dispatched.
-	 *
-	 * Reads of this information must be protected with blk_queue_enter() /
-	 * blk_queue_exit(). Modifying this information is only allowed while
-	 * no requests are being processed. See also blk_mq_freeze_queue() and
-	 * blk_mq_unfreeze_queue().
+	 * Zoned block device information. Reads of this information must be
+	 * protected with blk_queue_enter() / blk_queue_exit(). Modifying this
+	 * information is only allowed while no requests are being processed.
+	 * See also blk_mq_freeze_queue() and blk_mq_unfreeze_queue().
 	 */
 	unsigned int		nr_zones;
 	unsigned int		zone_capacity;
 	unsigned long		*conv_zones_bitmap;
-	unsigned long		*seq_zones_wlock;
 	unsigned int            zone_wplugs_hash_bits;
 	spinlock_t              zone_wplugs_lock;
 	struct mempool_s	*zone_wplugs_pool;
@@ -635,15 +626,6 @@ static inline unsigned int disk_zone_no(struct gendisk *disk, sector_t sector)
 	return sector >> ilog2(disk->queue->limits.chunk_sectors);
 }
 
-static inline bool disk_zone_is_seq(struct gendisk *disk, sector_t sector)
-{
-	if (!blk_queue_is_zoned(disk->queue))
-		return false;
-	if (!disk->conv_zones_bitmap)
-		return true;
-	return !test_bit(disk_zone_no(disk, sector), disk->conv_zones_bitmap);
-}
-
 static inline void disk_set_max_open_zones(struct gendisk *disk,
 		unsigned int max_open_zones)
 {
@@ -677,10 +659,6 @@ static inline unsigned int disk_nr_zones(struct gendisk *disk)
 {
 	return 0;
 }
-static inline bool disk_zone_is_seq(struct gendisk *disk, sector_t sector)
-{
-	return false;
-}
 static inline unsigned int disk_zone_no(struct gendisk *disk, sector_t sector)
 {
 	return 0;
@@ -869,11 +847,6 @@ static inline bool bio_straddles_zones(struct bio *bio)
 		disk_zone_no(bio->bi_bdev->bd_disk, bio_end_sector(bio) - 1);
 }
 
-static inline unsigned int bio_zone_is_seq(struct bio *bio)
-{
-	return disk_zone_is_seq(bio->bi_bdev->bd_disk, bio->bi_iter.bi_sector);
-}
-
 /*
  * Return how much of the chunk is left to be used for I/O at a given offset.
  */
-- 
2.44.0

[PATCH v7 27/28] block: Do not force select mq-deadline with CONFIG_BLK_DEV_ZONED

[Damien Le Moal]

Now that zone block device write ordering control does not depend
anymore on mq-deadline and zone write locking, there is no need to force
select the mq-deadline scheduler when CONFIG_BLK_DEV_ZONED is enabled.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 block/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/block/Kconfig b/block/Kconfig
index 9f647149fbee..d47398ae9824 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -100,7 +100,6 @@ config BLK_DEV_WRITE_MOUNTED
 
 config BLK_DEV_ZONED
 	bool "Zoned block device support"
-	select MQ_IOSCHED_DEADLINE
 	help
 	Block layer zoned block device support. This option enables
 	support for ZAC/ZBC/ZNS host-managed and host-aware zoned block
-- 
2.44.0

[PATCH v7 28/28] block: Do not special-case plugging of zone write operations

[Damien Le Moal]

With the block layer zone write plugging being automatically done for
any write operation to a zone of a zoned block device, a regular request
plugging handled through current->plug can only ever see at most a
single write request per zone. In such case, any potential reordering
of the plugged requests will be harmless. We can thus remove the special
casing for write operations to zones and have these requests plugged as
well. This allows removing the function blk_mq_plug and instead directly
using current->plug where needed.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 block/blk-core.c       |  6 ------
 block/blk-merge.c      |  3 +--
 block/blk-mq.c         |  7 +------
 block/blk-mq.h         | 31 -------------------------------
 include/linux/blkdev.h | 12 ------------
 5 files changed, 2 insertions(+), 57 deletions(-)

diff --git a/block/blk-core.c b/block/blk-core.c
index e1a5344c2257..47400a4fe851 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -907,12 +907,6 @@ int bio_poll(struct bio *bio, struct io_comp_batch *iob, unsigned int flags)
 	    !test_bit(QUEUE_FLAG_POLL, &q->queue_flags))
 		return 0;
 
-	/*
-	 * As the requests that require a zone lock are not plugged in the
-	 * first place, directly accessing the plug instead of using
-	 * blk_mq_plug() should not have any consequences during flushing for
-	 * zoned devices.
-	 */
 	blk_flush_plug(current->plug, false);
 
 	/*
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 7f8a808b74c1..f64115d72f3d 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -1113,10 +1113,9 @@ static enum bio_merge_status blk_attempt_bio_merge(struct request_queue *q,
 bool blk_attempt_plug_merge(struct request_queue *q, struct bio *bio,
 		unsigned int nr_segs)
 {
-	struct blk_plug *plug;
+	struct blk_plug *plug = current->plug;
 	struct request *rq;
 
-	plug = blk_mq_plug(bio);
 	if (!plug || rq_list_empty(plug->mq_list))
 		return false;
 
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 9f2d9970eeba..434d45219e23 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1330,11 +1330,6 @@ void blk_execute_rq_nowait(struct request *rq, bool at_head)
 
 	blk_account_io_start(rq);
 
-	/*
-	 * As plugging can be enabled for passthrough requests on a zoned
-	 * device, directly accessing the plug instead of using blk_mq_plug()
-	 * should not have any consequences.
-	 */
 	if (current->plug && !at_head) {
 		blk_add_rq_to_plug(current->plug, rq);
 		return;
@@ -2932,7 +2927,7 @@ static void blk_mq_use_cached_rq(struct request *rq, struct blk_plug *plug,
 void blk_mq_submit_bio(struct bio *bio)
 {
 	struct request_queue *q = bdev_get_queue(bio->bi_bdev);
-	struct blk_plug *plug = blk_mq_plug(bio);
+	struct blk_plug *plug = current->plug;
 	const int is_sync = op_is_sync(bio->bi_opf);
 	struct blk_mq_hw_ctx *hctx;
 	unsigned int nr_segs = 1;
diff --git a/block/blk-mq.h b/block/blk-mq.h
index f75a9ecfebde..260beea8e332 100644
--- a/block/blk-mq.h
+++ b/block/blk-mq.h
@@ -365,37 +365,6 @@ static inline void blk_mq_clear_mq_map(struct blk_mq_queue_map *qmap)
 		qmap->mq_map[cpu] = 0;
 }
 
-/*
- * blk_mq_plug() - Get caller context plug
- * @bio : the bio being submitted by the caller context
- *
- * Plugging, by design, may delay the insertion of BIOs into the elevator in
- * order to increase BIO merging opportunities. This however can cause BIO
- * insertion order to change from the order in which submit_bio() is being
- * executed in the case of multiple contexts concurrently issuing BIOs to a
- * device, even if these context are synchronized to tightly control BIO issuing
- * order. While this is not a problem with regular block devices, this ordering
- * change can cause write BIO failures with zoned block devices as these
- * require sequential write patterns to zones. Prevent this from happening by
- * ignoring the plug state of a BIO issuing context if it is for a zoned block
- * device and the BIO to plug is a write operation.
- *
- * Return current->plug if the bio can be plugged and NULL otherwise
- */
-static inline struct blk_plug *blk_mq_plug( struct bio *bio)
-{
-	/* Zoned block device write operation case: do not plug the BIO */
-	if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
-	    bdev_op_is_zoned_write(bio->bi_bdev, bio_op(bio)))
-		return NULL;
-
-	/*
-	 * For regular block devices or read operations, use the context plug
-	 * which may be NULL if blk_start_plug() was not executed.
-	 */
-	return current->plug;
-}
-
 /* Free all requests on the list */
 static inline void blk_mq_free_requests(struct list_head *list)
 {
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 5a6e05df2554..c62536c78a46 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1299,18 +1299,6 @@ static inline unsigned int bdev_zone_no(struct block_device *bdev, sector_t sec)
 	return disk_zone_no(bdev->bd_disk, sec);
 }
 
-/* Whether write serialization is required for @op on zoned devices. */
-static inline bool op_needs_zoned_write_locking(enum req_op op)
-{
-	return op == REQ_OP_WRITE || op == REQ_OP_WRITE_ZEROES;
-}
-
-static inline bool bdev_op_is_zoned_write(struct block_device *bdev,
-					  enum req_op op)
-{
-	return bdev_is_zoned(bdev) && op_needs_zoned_write_locking(op);
-}
-
 static inline sector_t bdev_zone_sectors(struct block_device *bdev)
 {
 	struct request_queue *q = bdev_get_queue(bdev);
-- 
2.44.0

Re: [PATCH v7 00/28] Zone write plugging

[Christoph Hellwig]

FYI, this still looks good to me with the minor changes from the
last two iterations.

Re: [PATCH v7 01/28] block: Restore sector of flush requests

[Johannes Thumshirn]

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>

Re: [PATCH v7 02/28] block: Remove req_bio_endio()

[Johannes Thumshirn]

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>

Re: [PATCH v7 03/28] block: Introduce blk_zone_update_request_bio()

[Johannes Thumshirn]

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>

Re: [PATCH v7 04/28] block: Introduce bio_straddles_zones() and bio_offset_from_zone_start()

[Johannes Thumshirn]

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>

Re: [PATCH v7 05/28] block: Allow using bio_attempt_back_merge() internally

[Johannes Thumshirn]

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>

Re: [PATCH v7 06/28] block: Remember zone capacity when revalidating zones

[Johannes Thumshirn]

On 08.04.24 03:42, Damien Le Moal wrote:
> @@ -608,6 +633,7 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
>   
>   	kfree(args.seq_zones_wlock);
>   	kfree(args.conv_zones_bitmap);
> +
>   	return ret;
>   }
>   EXPORT_SYMBOL_GPL(blk_revalidate_disk_zones);

Unrelated whitespace change, but no need to respin :D
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>

Re: [PATCH v7 00/28] Zone write plugging

[Damien Le Moal]

On 4/8/24 10:41, Damien Le Moal wrote:
> The patch series introduces zone write plugging (ZWP) as the new
> mechanism to control the ordering of writes to zoned block devices.
> ZWP replaces zone write locking (ZWL) which is implemented only by
> mq-deadline today. ZWP also allows emulating zone append operations
> using regular writes for zoned devices that do not natively support this
> operation (e.g. SMR HDDs). This patch series removes the scsi disk
> driver and device mapper zone append emulation to use ZWP emulation.

Jens,

If you are OK with this series, can we get it queued please ?
I have a couple more patches I would like to send on top of this and the longer
it soaks in linux-next the better I think.

-- 
Damien Le Moal
Western Digital Research

Re: [PATCH v7 00/28] Zone write plugging

[Jens Axboe]

On Mon, 08 Apr 2024 10:41:00 +0900, Damien Le Moal wrote:
> The patch series introduces zone write plugging (ZWP) as the new
> mechanism to control the ordering of writes to zoned block devices.
> ZWP replaces zone write locking (ZWL) which is implemented only by
> mq-deadline today. ZWP also allows emulating zone append operations
> using regular writes for zoned devices that do not natively support this
> operation (e.g. SMR HDDs). This patch series removes the scsi disk
> driver and device mapper zone append emulation to use ZWP emulation.
> 
> [...]

Applied, thanks!

[01/28] block: Restore sector of flush requests
        commit: 6f8fd758de63bab513c551bb1796a14f8cdc40d9
[02/28] block: Remove req_bio_endio()
        commit: c0da26f950a355ef3540ca8d215351e1ed4cac47
[03/28] block: Introduce blk_zone_update_request_bio()
        commit: a0508c36efa838b16aa93a23e3583d68d3ef6c33
[04/28] block: Introduce bio_straddles_zones() and bio_offset_from_zone_start()
        commit: b85a3c1b7978f942fa5bf8cfe22b6a6aaa49d3b7
[05/28] block: Allow using bio_attempt_back_merge() internally
        commit: dd850ff3eee428b4e1276bd51263dd937643ba19
[06/28] block: Remember zone capacity when revalidating zones
        commit: ecfe43b11b02ffeb24c203af7d3947417d412cf7
[07/28] block: Introduce zone write plugging
        commit: dd291d77cc90eb6a86e9860ba8e6e38eebd57d12
[08/28] block: Fake max open zones limit when there is no limit
        commit: 843283e96e5a3d8379579ac13ce9cbf75522ffde
[09/28] block: Allow zero value of max_zone_append_sectors queue limit
        commit: ccdbf0aad2523ca133cceb22ce0f8306730e7ac3
[10/28] block: Implement zone append emulation
        commit: 9b1ce7f0c6f82e241196febabddba5fab66c8f05
[11/28] block: Allow BIO-based drivers to use blk_revalidate_disk_zones()
        commit: 946dd71ed87dfa8d72f1404f906e1ae413a62d0f
[12/28] dm: Use the block layer zone append emulation
        commit: f211268ed1f9bdf48f06a3ead5f5d88437450579
[13/28] scsi: sd: Use the block layer zone append emulation
        commit: 1846f308d66f9c9a9c4f20df530dc77e57e3d92b
[14/28] ublk_drv: Do not request ELEVATOR_F_ZBD_SEQ_WRITE elevator feature
        commit: 11be0cb5fe25603472831f85abb32f0112239238
[15/28] null_blk: Do not request ELEVATOR_F_ZBD_SEQ_WRITE elevator feature
        commit: b66f79b706f0cfc09bde8465668428eef188a94c
[16/28] null_blk: Introduce zone_append_max_sectors attribute
        commit: 997a1f08b4d4283687477470bcc256dfd33ba9d0
[17/28] null_blk: Introduce fua attribute
        commit: f4f84586c8b9c7d5312d6f8fb4db1e12f2b83c27
[18/28] nvmet: zns: Do not reference the gendisk conv_zones_bitmap
        commit: d2a9b5fdc16941243bbd8b360cb6e4fd62f41265
[19/28] block: Remove BLK_STS_ZONE_RESOURCE
        commit: 63b5385e781417e73bda3fd652c2199826afda6e
[20/28] block: Simplify blk_revalidate_disk_zones() interface
        commit: 9b3c08b90fc212de58c34621d83e74977170b2cd
[21/28] block: mq-deadline: Remove support for zone write locking
        commit: fde02699c242e88a71286677d27cc890a959b67f
[22/28] block: Remove elevator required features
        commit: e4eb37cc0f3ed8971c50dddfbeb35a799e5b504e
[23/28] block: Do not check zone type in blk_check_zone_append()
        commit: bca150f0d4edbf02002efa3309bb8e8c9d6596c9
[24/28] block: Move zone related debugfs attribute to blk-zoned.c
        commit: d9f1439a30d607f7bd06494ea2a63018b7d46380
[25/28] block: Replace zone_wlock debugfs entry with zone_wplugs entry
        commit: a98b05b02f0f1f9f4a504564070af208b70214d0
[26/28] block: Remove zone write locking
        commit: 02ccd7c360b1692da164842f211d41fab7d83adc
[27/28] block: Do not force select mq-deadline with CONFIG_BLK_DEV_ZONED
        commit: 97abee507b4b71d43dc1c1d3de4739db2c86c0ac
[28/28] block: Do not special-case plugging of zone write operations
        commit: 99a9476b27e89525cef653b91e542baf61f105d2

Best regards,
-- 
Jens Axboe