From: Christoph Hellwig <hch@lst.de>
To: Chao Leng <lengchao@huawei.com>
Cc: kbusch@kernel.org, axboe@fb.com, hch@lst.de,
linux-nvme@lists.infradead.org, sagi@grimberg.me
Subject: Re: [PATCH] nvme-core: fix io interrupt when work with dm-multipah
Date: Tue, 28 Jul 2020 13:19:56 +0200 [thread overview]
Message-ID: <20200728111956.GA31546@lst.de> (raw)
In-Reply-To: <20200727055818.21430-1-lengchao@huawei.com>
On Mon, Jul 27, 2020 at 01:58:18PM +0800, Chao Leng wrote:
> The protocol NVM-Express-1.4 define:
> Command Interrupted: Command processing was interrupted and the
> controller is unable to successfully complete the command. The host
> should retry the command. If this status code is returned, then
> the controller shall clear the Do Not Retry bit to ‘0’ in the Status
> field of the CQE (refer to Figure 124). The controller shall not return
> this status code unless the host has set the Advanced Command Retry
> Enable (ACRE) field to 1h in the Host Behavior Support feature(refer to
> section 5.21.1.22).
>
> According the protocol define, NVME_SC_CMD_INTERRUPTED need retry.
> The error code NVME_SC_CMD_INTERRUPTED should not translate to
> BLK_STS_TARGET, because if the error code translate to BLK_STS_TARGET,
> dm-multipah will return error to application. So if target return error
> code NVME_SC_CMD_INTERRUPTED, io will interrupt. NVME_SC_CMD_INTERRUPTED
> should translate to BLK_STS_IOERR by default, dm-multipath will fail
> over to other path retry the io.
IOERR still seems wrong, though.
_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme
next prev parent reply other threads:[~2020-07-28 11:20 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-27 5:58 [PATCH] nvme-core: fix io interrupt when work with dm-multipah Chao Leng
2020-07-28 11:19 ` Christoph Hellwig [this message]
2020-07-29 2:54 ` Chao Leng
2020-07-29 5:59 ` Christoph Hellwig
2020-07-30 1:49 ` Chao Leng
2020-08-05 6:40 ` Chao Leng
2020-08-05 15:29 ` Keith Busch
2020-08-06 5:52 ` Chao Leng
2020-08-06 14:26 ` Keith Busch
2020-08-06 15:59 ` Meneghini, John
2020-08-06 16:17 ` Meneghini, John
2020-08-06 18:40 ` Mike Snitzer
2020-08-06 19:19 ` [PATCH] nvme: restore use of blk_path_error() in nvme_complete_rq() Mike Snitzer
2020-08-06 22:42 ` Meneghini, John
2020-08-07 0:07 ` Mike Snitzer
2020-08-07 1:21 ` Sagi Grimberg
2020-08-07 4:50 ` Mike Snitzer
2020-08-07 23:35 ` Sagi Grimberg
2020-08-08 21:08 ` Meneghini, John
2020-08-08 21:11 ` Meneghini, John
2020-08-10 14:48 ` Mike Snitzer
2020-08-11 12:54 ` Meneghini, John
2020-08-10 8:10 ` Chao Leng
2020-08-11 12:36 ` Meneghini, John
2020-08-12 7:51 ` Chao Leng
2020-08-10 14:36 ` Mike Snitzer
2020-08-10 17:22 ` [PATCH] nvme: explicitly use normal NVMe error handling when appropriate Mike Snitzer
2020-08-11 3:32 ` Chao Leng
2020-08-11 4:20 ` Mike Snitzer
2020-08-11 6:17 ` Chao Leng
2020-08-11 14:12 ` Mike Snitzer
2020-08-13 14:48 ` [RESEND PATCH] " Mike Snitzer
2020-08-13 15:29 ` Meneghini, John
2020-08-13 15:43 ` Mike Snitzer
2020-08-13 15:59 ` Meneghini, John
2020-08-13 15:36 ` Christoph Hellwig
2020-08-13 17:47 ` Mike Snitzer
2020-08-13 18:43 ` Christoph Hellwig
2020-08-13 19:03 ` Mike Snitzer
2020-08-14 4:26 ` Meneghini, John
2020-08-14 6:53 ` Sagi Grimberg
2020-08-14 6:55 ` Christoph Hellwig
2020-08-14 7:02 ` Sagi Grimberg
2020-08-14 3:23 ` Meneghini, John
2020-08-07 0:44 ` [PATCH] nvme: restore use of blk_path_error() in nvme_complete_rq() Sagi Grimberg
2020-08-10 12:43 ` Christoph Hellwig
2020-08-10 15:06 ` Mike Snitzer
2020-08-11 3:45 ` [PATCH] " Chao Leng
2020-08-07 0:03 ` [PATCH] nvme-core: fix io interrupt when work with dm-multipah Sagi Grimberg
2020-08-07 2:28 ` Chao Leng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200728111956.GA31546@lst.de \
--to=hch@lst.de \
--cc=axboe@fb.com \
--cc=kbusch@kernel.org \
--cc=lengchao@huawei.com \
--cc=linux-nvme@lists.infradead.org \
--cc=sagi@grimberg.me \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).