From: rafael@kernel.org (Rafael J. Wysocki)
Subject: [Regression] Commit "nvme/pci: Use host managed power state for suspend" has problems
Date: Wed, 7 Aug 2019 12:54:08 +0200 [thread overview]
Message-ID: <CAJZ5v0hsLqugkep9JTzUpErUoBdFbEqmHEXqSzdfPk8D1ZvHdg@mail.gmail.com> (raw)
In-Reply-To: <20190807104500.GB11356@lst.de>
On Wed, Aug 7, 2019@12:45 PM Christoph Hellwig <hch@lst.de> wrote:
>
> On Wed, Aug 07, 2019@11:48:33AM +0200, Rafael J. Wysocki wrote:
> > So I think I know what the problem is here.
> >
> > If ASPM is disabled for the NVMe device (which is the case on my machine by default),
> > skipping the bus-level PM in nvme_suspend() causes the PCIe link of it to stay up and
> > that prevents the SoC from getting into deeper package C-states.
> >
> > If I change the ASPM policy to "powersave" (through the module parameter in there),
> > ASPM gets enabled for the NVMe drive and I can get into PC10 via S2Idle with plain 5.3-rc3.
> >
> > However, that's a bit less than straightforward, so I'm going to post a patch to make
> > nvme_suspend() fall back to the "old ways" if ASPM is not enabled for the target device.
>
> Sounds sensibel.
>
> FYI your mail is not properly formatted and has way too long lines.
Sorry about that.
next prev parent reply other threads:[~2019-08-07 10:54 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-25 9:51 [Regression] Commit "nvme/pci: Use host managed power state for suspend" has problems Rafael J. Wysocki
2019-07-25 14:02 ` Kai-Heng Feng
2019-07-25 16:23 ` Mario.Limonciello
2019-07-25 17:03 ` Rafael J. Wysocki
2019-07-25 17:23 ` Mario.Limonciello
2019-07-25 18:20 ` Kai-Heng Feng
2019-07-25 19:09 ` Mario.Limonciello
2019-07-30 10:45 ` Rafael J. Wysocki
2019-07-30 14:41 ` Keith Busch
2019-07-30 17:14 ` Mario.Limonciello
2019-07-30 18:50 ` Kai-Heng Feng
2019-07-30 19:19 ` Keith Busch
2019-07-30 21:05 ` Mario.Limonciello
2019-07-30 21:31 ` Keith Busch
2019-07-31 21:25 ` Rafael J. Wysocki
2019-07-31 22:19 ` Keith Busch
2019-07-31 22:33 ` Rafael J. Wysocki
2019-08-01 9:05 ` Kai-Heng Feng
2019-08-01 17:29 ` Rafael J. Wysocki
2019-08-01 19:05 ` Mario.Limonciello
2019-08-01 22:26 ` Rafael J. Wysocki
2019-08-02 10:55 ` Kai-Heng Feng
2019-08-02 11:04 ` Rafael J. Wysocki
2019-08-05 19:13 ` Kai-Heng Feng
2019-08-05 21:28 ` Rafael J. Wysocki
2019-08-06 14:02 ` Mario.Limonciello
2019-08-06 15:00 ` Rafael J. Wysocki
2019-08-07 10:29 ` Rafael J. Wysocki
2019-08-01 20:22 ` Keith Busch
2019-08-07 9:48 ` Rafael J. Wysocki
2019-08-07 10:45 ` Christoph Hellwig
2019-08-07 10:54 ` Rafael J. Wysocki [this message]
2019-08-07 9:53 ` [PATCH] nvme-pci: Do not prevent PCI bus-level PM from being used Rafael J. Wysocki
2019-08-07 10:14 ` Rafael J. Wysocki
2019-08-07 10:43 ` Christoph Hellwig
2019-08-07 14:37 ` Keith Busch
2019-08-08 8:36 ` [PATCH] nvme-pci: Allow PCI bus-level PM to be used if ASPM is disabled Rafael J. Wysocki
2019-08-08 8:48 ` Christoph Hellwig
2019-08-08 9:06 ` Rafael J. Wysocki
2019-08-08 10:03 ` [PATCH v2 0/2] " Rafael J. Wysocki
2019-08-08 10:06 ` [PATCH v2 1/2] PCI: PCIe: ASPM: Introduce pcie_aspm_enabled_mask() Rafael J. Wysocki
2019-08-08 13:15 ` Bjorn Helgaas
2019-08-08 14:48 ` Rafael J. Wysocki
2019-08-08 10:10 ` [PATCH v2 2/2] nvme-pci: Allow PCI bus-level PM to be used if ASPM is disabled Rafael J. Wysocki
2019-08-08 13:43 ` Bjorn Helgaas
2019-08-08 14:47 ` Rafael J. Wysocki
2019-08-08 17:06 ` Rafael J. Wysocki
2019-08-08 18:39 ` Bjorn Helgaas
2019-08-08 20:01 ` Keith Busch
2019-08-08 20:05 ` Mario.Limonciello
2019-08-08 20:41 ` Rafael J. Wysocki
2019-08-09 4:47 ` Bjorn Helgaas
2019-08-09 8:04 ` Rafael J. Wysocki
2019-08-08 21:51 ` [PATCH v3 0/2] " Rafael J. Wysocki
2019-08-08 21:55 ` [PATCH v3 1/2] PCI: PCIe: ASPM: Introduce pcie_aspm_enabled() Rafael J. Wysocki
2019-08-09 4:50 ` Bjorn Helgaas
2019-08-09 8:00 ` Rafael J. Wysocki
2019-10-07 22:34 ` Bjorn Helgaas
2019-10-08 9:27 ` Rafael J. Wysocki
2019-10-08 21:16 ` Bjorn Helgaas
2019-10-08 22:54 ` Rafael J. Wysocki
2019-10-09 12:49 ` Bjorn Helgaas
2019-08-08 21:58 ` [PATCH v3 2/2] nvme-pci: Allow PCI bus-level PM to be used if ASPM is disabled Rafael J. Wysocki
2019-08-08 22:13 ` [PATCH v3 0/2] " Keith Busch
2019-08-09 8:05 ` Rafael J. Wysocki
2019-08-09 14:52 ` Keith Busch
2019-07-25 16:59 ` [Regression] Commit "nvme/pci: Use host managed power state for suspend" has problems Rafael J. Wysocki
2019-07-25 14:52 ` Keith Busch
2019-07-25 19:48 ` Rafael J. Wysocki
2019-07-25 19:52 ` Keith Busch
2019-07-25 20:02 ` Rafael J. Wysocki
2019-07-26 14:02 ` Kai-Heng Feng
2019-07-27 12:55 ` Rafael J. Wysocki
2019-07-29 15:51 ` Mario.Limonciello
2019-07-29 22:05 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAJZ5v0hsLqugkep9JTzUpErUoBdFbEqmHEXqSzdfPk8D1ZvHdg@mail.gmail.com \
--to=rafael@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).