* [PATCH v2] ARM: OMAP: board-ldp: add regulator info to get the microSD slot working again
@ 2009-03-31 8:45 Koen Kooi
0 siblings, 0 replies; only message in thread
From: Koen Kooi @ 2009-03-31 8:45 UTC (permalink / raw)
To: linux-omap; +Cc: Koen Kooi, Koen Kooi
From: Koen Kooi <koen@openembedded.org>
The ldp board was left behind when other boards got updated. The ldp info was copied from the beagleboard board file and s/beagle/ldp/g
Changes since v1:
* dropped vsim portion since only 4 pins are hooked up
Signed-off-by: Koen Kooi <koen@beagleboard.org>
---
arch/arm/mach-omap2/board-ldp.c | 32 ++++++++++++++++++++++++++++++++
1 files changed, 32 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 30926b0..19a5c15 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -22,6 +22,7 @@
#include <linux/clk.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
#include <linux/i2c/twl4030.h>
#include <mach/hardware.h>
@@ -450,7 +451,16 @@ static struct twl4030_script *twl4030_scripts[] __initdata = {
&wrst_script,
};
+static const struct twl4030_resconfig ldp_resconfig[] = {
+ /* disable regulators that u-boot left enabled; the
+ * devices' drivers should be managing these.
+ */
+ { .resource = RES_VMMC1, },
+ { 0, },
+};
+
static struct twl4030_power_data sdp3430_t2scripts_data __initdata = {
+ .resource_config = ldp_resconfig,
.scripts = twl4030_scripts,
.size = ARRAY_SIZE(twl4030_scripts),
};
@@ -474,6 +484,25 @@ static struct twl4030_madc_platform_data ldp_madc_data = {
.irq_line = 1,
};
+static struct regulator_consumer_supply ldp_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data ldp_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &ldp_vmmc1_supply,
+};
+
static struct twl4030_platform_data ldp_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
@@ -483,6 +512,7 @@ static struct twl4030_platform_data ldp_twldata = {
.madc = &ldp_madc_data,
.usb = &ldp_usb_data,
.power = &sdp3430_t2scripts_data,
+ .vmmc1 = &ldp_vmmc1,
.gpio = &ldp_gpio_data,
.keypad = &ldp_kp_twl4030_data,
};
@@ -530,6 +560,8 @@ static void __init omap_ldp_init(void)
omap_serial_init();
usb_musb_init();
twl4030_mmc_init(mmc);
+ /* link regulators to MMC adapters */
+ ldp_vmmc1_supply.dev = mmc[0].dev;
}
static void __init omap_ldp_map_io(void)
--
1.6.2
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2009-03-31 8:42 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-03-31 8:45 [PATCH v2] ARM: OMAP: board-ldp: add regulator info to get the microSD slot working again Koen Kooi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).