* [PATCH] ARM: dts: omap4-droid4: Fix sgx clock rate
@ 2020-03-10 20:18 Tony Lindgren
2020-03-10 21:09 ` Tony Lindgren
0 siblings, 1 reply; 3+ messages in thread
From: Tony Lindgren @ 2020-03-10 20:18 UTC (permalink / raw)
To: linux-omap
Cc: Benoît Cousson, devicetree, Arthur Demchenkov,
Merlijn Wajer, Sebastian Reichel
We currently have a different clock rate for droid4 compared to the
stock v3.0.8 based Android Linux kernel:
# cat /sys/kernel/debug/clk/dpll_*_m7x2_ck/clk_rate
266666667
307200000
# cat /sys/kernel/debug/clk/l3_gfx_cm:clk:0000:0/clk_rate
307200000
Let's fix this by configuring sgx to use 153.6 MHz instead of 307.2 MHz.
This helps a bit with thermal issues that seem to be related to memory
corruption when using sgx. It seems that other driver related issues
still remain though.
Cc: Arthur Demchenkov <spinal.by@gmail.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/motorola-mapphone-common.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
--- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -689,6 +689,16 @@ &rng_target {
status = "disabled";
};
+/*
+ * Use dpll_per for sgx at 153.6MHz like the stock v3.0.8 Android kernel
+ */
+&sgx_module {
+ assigned-clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 24>,
+ <&dpll_per_m7x2_ck>;
+ assigned-clock-rates = <0>, <153600000>;
+ assigned-clock-parents = <&dpll_per_m7x2_ck>;
+};
+
/* Configure pwm clock source for timers 8 & 9 */
&timer8 {
assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
--
2.25.1
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] ARM: dts: omap4-droid4: Fix sgx clock rate
2020-03-10 20:18 [PATCH] ARM: dts: omap4-droid4: Fix sgx clock rate Tony Lindgren
@ 2020-03-10 21:09 ` Tony Lindgren
2020-03-14 17:24 ` Tony Lindgren
0 siblings, 1 reply; 3+ messages in thread
From: Tony Lindgren @ 2020-03-10 21:09 UTC (permalink / raw)
To: linux-omap
Cc: Benoît Cousson, devicetree, Arthur Demchenkov,
Merlijn Wajer, Sebastian Reichel
* Tony Lindgren <tony@atomide.com> [200310 20:19]:
> +&sgx_module {
Sorry the sgx_module label came from the linux_openpvrsgx branch
I had merged in as Arthur noticed.
Below is an updated patch against v5.6-rc series.
Regards,
Tony
8< ------------------------
From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Tue, 10 Mar 2020 14:02:48 -0700
Subject: [PATCH] ARM: dts: omap4-droid4: Fix sgx clock rate
We currently have a different clock rate for droid4 compared to the
stock v3.0.8 based Android Linux kernel:
# cat /sys/kernel/debug/clk/dpll_*_m7x2_ck/clk_rate
266666667
307200000
# cat /sys/kernel/debug/clk/l3_gfx_cm:clk:0000:0/clk_rate
307200000
Let's fix this by configuring sgx to use 153.6 MHz instead of 307.2 MHz.
This helps a bit with thermal issues that seem to be related to memory
corruption when using sgx. It seems that other driver related issues
still remain though.
Cc: Arthur Demchenkov <spinal.by@gmail.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/motorola-mapphone-common.dtsi | 10 ++++++++++
arch/arm/boot/dts/omap4.dtsi | 2 +-
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
--- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -678,6 +678,16 @@ &rng_target {
status = "disabled";
};
+/*
+ * Use dpll_per for sgx at 153.6MHz like the stock v3.0.8 Android kernel
+ */
+&sgx_module {
+ assigned-clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 24>,
+ <&dpll_per_m7x2_ck>;
+ assigned-clock-rates = <0>, <153600000>;
+ assigned-clock-parents = <&dpll_per_m7x2_ck>;
+};
+
/* Configure pwm clock source for timers 8 & 9 */
&timer8 {
assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -390,7 +390,7 @@ abb_iva: regulator-abb-iva {
status = "disabled";
};
- target-module@56000000 {
+ sgx_module: target-module@56000000 {
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x5600fe00 0x4>,
<0x5600fe10 0x4>;
--
2.25.1
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] ARM: dts: omap4-droid4: Fix sgx clock rate
2020-03-10 21:09 ` Tony Lindgren
@ 2020-03-14 17:24 ` Tony Lindgren
0 siblings, 0 replies; 3+ messages in thread
From: Tony Lindgren @ 2020-03-14 17:24 UTC (permalink / raw)
To: linux-omap
Cc: Benoît Cousson, devicetree, Arthur Demchenkov,
Merlijn Wajer, Sebastian Reichel
* Tony Lindgren <tony@atomide.com> [200310 21:10]:
> * Tony Lindgren <tony@atomide.com> [200310 20:19]:
> > +&sgx_module {
>
> Sorry the sgx_module label came from the linux_openpvrsgx branch
> I had merged in as Arthur noticed.
>
> Below is an updated patch against v5.6-rc series.
And looks like this is also needed for at least duovero, so let's
change the clock for all 4430.
Regards,
Tony
8< ----------------------
From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Tue, 10 Mar 2020 14:02:48 -0700
Subject: [PATCH] ARM: dts: omap4: Fix sgx clock rate for 4430
We currently have a different clock rate for droid4 compared to the
stock v3.0.8 based Android Linux kernel:
# cat /sys/kernel/debug/clk/dpll_*_m7x2_ck/clk_rate
266666667
307200000
# cat /sys/kernel/debug/clk/l3_gfx_cm:clk:0000:0/clk_rate
307200000
Let's fix this by configuring sgx to use 153.6 MHz instead of 307.2 MHz.
Looks like also at least duover needs this change to avoid hangs, so
let's apply it for all 4430.
This helps a bit with thermal issues that seem to be related to memory
corruption when using sgx. It seems that other driver related issues
still remain though.
Cc: Arthur Demchenkov <spinal.by@gmail.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/omap4.dtsi | 2 +-
arch/arm/boot/dts/omap443x.dtsi | 10 ++++++++++
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -390,7 +390,7 @@ abb_iva: regulator-abb-iva {
status = "disabled";
};
- target-module@56000000 {
+ sgx_module: target-module@56000000 {
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x5600fe00 0x4>,
<0x5600fe10 0x4>;
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -74,3 +74,13 @@ &cpu_thermal {
};
/include/ "omap443x-clocks.dtsi"
+
+/*
+ * Use dpll_per for sgx at 153.6MHz like droid4 stock v3.0.8 Android kernel
+ */
+&sgx_module {
+ assigned-clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 24>,
+ <&dpll_per_m7x2_ck>;
+ assigned-clock-rates = <0>, <153600000>;
+ assigned-clock-parents = <&dpll_per_m7x2_ck>;
+};
--
2.25.1
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-03-15 1:39 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-10 20:18 [PATCH] ARM: dts: omap4-droid4: Fix sgx clock rate Tony Lindgren
2020-03-10 21:09 ` Tony Lindgren
2020-03-14 17:24 ` Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).