Linux-OMAP Archive on lore.kernel.org
 help / color / Atom feed
* [RFC PATCH 7/7] arm: dts: pwm: replace polarity constant with macro
       [not found] <20200317123231.2843297-1-oleksandr.suvorov@toradex.com>
@ 2020-03-17 12:32 ` Oleksandr Suvorov
  2020-03-20 10:02   ` Krzysztof Kozlowski
  0 siblings, 1 reply; 2+ messages in thread
From: Oleksandr Suvorov @ 2020-03-17 12:32 UTC (permalink / raw)
  To: devicetree, linux-pwm
  Cc: Paul Barker, Uwe Kleine-König, Laurent Pinchart,
	Marcel Ziswiler, Igor Opaniuk, Philippe Schenker,
	Oleksandr Suvorov, Alexandre Belloni, Bartosz Golaszewski,
	Benoît Cousson, Chen-Yu Tsai, David Lechner, Fabio Estevam,
	Geert Uytterhoeven, Heiko Stuebner, Jisheng Zhang, Kevin Hilman,
	Krzysztof Kozlowski, Kukjin Kim, Ludovic Desroches, Magnus Damm,
	Maxime Ripard, NXP Linux Team, Nicolas Ferre,
	Pengutronix Kernel Team, Peter Rosin, Rob Herring, Sascha Hauer,
	Sebastian Hesselbarth, Sekhar Nori, Shawn Guo, Stefan Agner,
	Tony Lindgren, linux-amlogic, linux-arm-kernel, linux-kernel,
	linux-omap, linux-renesas-soc, linux-rockchip, linux-samsung-soc

There is the PWM_POLARITY_NORMAL defined and describled in
<dt-bindings/pwm/pwm.h> and used by pwm drivers.

This patch converts all '0' constant in pwms parameters into
PWM_POLARITY_NORMAL.

Replace with sed regexp:
's/(pwms = <&[a-zA-Z_0-9]+ [0-9]+ [0-9]+) 0>/\1 PWM_POLARITY_NORMAL>/'

Then:
- included pwm.h in some dts/dtsi to fix building errors about undefined
  symbols.
- fixed the patman warnings about the code format;

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
---

 arch/arm/boot/dts/am335x-cm-t335.dts               | 2 +-
 arch/arm/boot/dts/am335x-evm.dts                   | 2 +-
 arch/arm/boot/dts/am3517-evm.dts                   | 2 +-
 arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi      | 2 +-
 arch/arm/boot/dts/at91-kizbox2-common.dtsi         | 6 +++---
 arch/arm/boot/dts/at91-kizbox3_common.dtsi         | 8 ++++----
 arch/arm/boot/dts/at91-kizboxmini-common.dtsi      | 6 +++---
 arch/arm/boot/dts/at91-nattis-2-natte-2.dts        | 2 +-
 arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts        | 2 +-
 arch/arm/boot/dts/at91sam9n12ek.dts                | 2 +-
 arch/arm/boot/dts/at91sam9x5dm.dtsi                | 2 +-
 arch/arm/boot/dts/berlin2cd-google-chromecast.dts  | 4 ++--
 arch/arm/boot/dts/da850-evm.dts                    | 2 +-
 arch/arm/boot/dts/da850-lego-ev3.dts               | 4 ++--
 arch/arm/boot/dts/exynos4412-midas.dtsi            | 2 +-
 arch/arm/boot/dts/exynos4412-odroidu3.dts          | 2 +-
 arch/arm/boot/dts/exynos5250-snow-common.dtsi      | 2 +-
 arch/arm/boot/dts/exynos5410-odroidxu.dts          | 2 +-
 arch/arm/boot/dts/exynos5420-peach-pit.dts         | 2 +-
 arch/arm/boot/dts/exynos5422-odroidhc1.dts         | 2 +-
 arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 +-
 arch/arm/boot/dts/exynos5422-odroidxu4.dts         | 2 +-
 arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi    | 4 ++--
 arch/arm/boot/dts/exynos5800-peach-pi.dts          | 2 +-
 arch/arm/boot/dts/imx53-tx53-x13x.dts              | 5 +++--
 arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts          | 2 +-
 arch/arm/boot/dts/imx6q-display5.dtsi              | 2 +-
 arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts       | 2 +-
 arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts       | 2 +-
 arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi            | 4 ++--
 arch/arm/boot/dts/imx7-colibri.dtsi                | 4 +++-
 arch/arm/boot/dts/imx7d-nitrogen7.dts              | 3 ++-
 arch/arm/boot/dts/imx7d-pico.dtsi                  | 3 ++-
 arch/arm/boot/dts/imx7d-sdb.dts                    | 3 ++-
 arch/arm/boot/dts/imx7ulp-evk.dts                  | 3 ++-
 arch/arm/boot/dts/iwg20d-q7-common.dtsi            | 2 +-
 arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi   | 2 +-
 arch/arm/boot/dts/meson8b-ec100.dts                | 4 ++--
 arch/arm/boot/dts/meson8b-mxq.dts                  | 4 ++--
 arch/arm/boot/dts/meson8b-odroidc1.dts             | 4 ++--
 arch/arm/boot/dts/motorola-mapphone-common.dtsi    | 3 ++-
 arch/arm/boot/dts/omap3-gta04.dtsi                 | 2 +-
 arch/arm/boot/dts/omap3-n900.dts                   | 2 +-
 arch/arm/boot/dts/rk3288-veyron-edp.dtsi           | 2 +-
 arch/arm/boot/dts/rk3288-veyron.dtsi               | 2 +-
 arch/arm/boot/dts/rv1108-evb.dts                   | 2 +-
 arch/arm/boot/dts/s3c6410-mini6410.dts             | 2 +-
 arch/arm/boot/dts/s5pv210-aries.dtsi               | 2 +-
 arch/arm/boot/dts/s5pv210-smdkv210.dts             | 2 +-
 arch/arm/boot/dts/sun5i-gr8-evb.dts                | 2 +-
 arch/arm/boot/dts/vf-colibri.dtsi                  | 4 +++-
 51 files changed, 76 insertions(+), 66 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
index c6fe9db660e2..cb1ec60fb455 100644
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -48,7 +48,7 @@ vwlan_fixed: fixedregulator2 {
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 0>;
+		pwms = <&ecap0 0 50000 PWM_POLARITY_NORMAL>;
 		brightness-levels = <0 51 53 56 62 75 101 152 255>;
 		default-brightness-level = <8>;
 	};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 68252dab32c3..dd8eba3d85c7 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -115,7 +115,7 @@ switch10 {
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 0>;
+		pwms = <&ecap0 0 50000 PWM_POLARITY_NORMAL>;
 		brightness-levels = <0 51 53 56 62 75 101 152 255>;
 		default-brightness-level = <8>;
 	};
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index a1fd3e63e86e..206e00db67f7 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -144,7 +144,7 @@ bl: backlight {
 		pinctrl-names = "default";
 		power-supply = <&vdd_io_reg>;
 		pinctrl-0 = <&backlight_pins>;
-		pwms = <&pwm11 0 5000000 0>;
+		pwms = <&pwm11 0 5000000 PWM_POLARITY_NORMAL>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <7>;
 		enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
index bea920b192b6..839b0d1e8a17 100644
--- a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
@@ -10,7 +10,7 @@
 / {
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&hlcdc_pwm 0 50000 0>;
+		pwms = <&hlcdc_pwm 0 50000 PWM_POLARITY_NORMAL>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
index af38253a6e7a..cea5226c5118 100644
--- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
@@ -63,21 +63,21 @@ pwm_leds {
 
 		blue {
 			label = "pwm:blue:user";
-			pwms = <&pwm0 2 10000000 0>;
+			pwms = <&pwm0 2 10000000 PWM_POLARITY_NORMAL>;
 			max-brightness = <255>;
 			linux,default-trigger = "none";
 		};
 
 		green {
 			label = "pwm:green:user";
-			pwms = <&pwm0 1 10000000 0>;
+			pwms = <&pwm0 1 10000000 PWM_POLARITY_NORMAL>;
 			max-brightness = <255>;
 			linux,default-trigger = "default-on";
 		};
 
 		red {
 			label = "pwm:red:user";
-			pwms = <&pwm0 0 10000000 0>;
+			pwms = <&pwm0 0 10000000 PWM_POLARITY_NORMAL>;
 			max-brightness = <255>;
 			linux,default-trigger = "default-on";
 		};
diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
index 299e74d23184..f1a8448ba6e1 100644
--- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
@@ -73,7 +73,7 @@ &pinctrl_pwm0_pwm_h2
 
 		red {
 			label = "pwm:red:user";
-			pwms = <&pwm0 0 10000000 0>;
+			pwms = <&pwm0 0 10000000 PWM_POLARITY_NORMAL>;
 			max-brightness = <255>;
 			linux,default-trigger = "default-on";
 			status = "disabled";
@@ -81,7 +81,7 @@ red {
 
 		green {
 			label = "pwm:green:user";
-			pwms = <&pwm0 1 10000000 0>;
+			pwms = <&pwm0 1 10000000 PWM_POLARITY_NORMAL>;
 			max-brightness = <255>;
 			linux,default-trigger = "default-on";
 			status = "disabled";
@@ -89,14 +89,14 @@ green {
 
 		blue {
 			label = "pwm:blue:user";
-			pwms = <&pwm0 2 10000000 0>;
+			pwms = <&pwm0 2 10000000 PWM_POLARITY_NORMAL>;
 			max-brightness = <255>;
 			status = "disabled";
 		};
 
 		white {
 			label = "pwm:white:user";
-			pwms = <&pwm0 3 10000000 0>;
+			pwms = <&pwm0 3 10000000 PWM_POLARITY_NORMAL>;
 			max-brightness = <255>;
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
index fddf267b2d17..60dad4ff6f27 100644
--- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
@@ -59,7 +59,7 @@ leds: pwm_leds {
 
 		led_blue: pwm_blue {
 			label = "pwm:blue:user";
-			pwms = <&pwm0 2 10000000 0>;
+			pwms = <&pwm0 2 10000000 PWM_POLARITY_NORMAL>;
 			max-brightness = <255>;
 			linux,default-trigger = "none";
 			status = "disabled";
@@ -67,14 +67,14 @@ led_blue: pwm_blue {
 
 		led_green: pwm_green {
 			label = "pwm:green:user";
-			pwms = <&pwm0 0 10000000 0>;
+			pwms = <&pwm0 0 10000000 PWM_POLARITY_NORMAL>;
 			max-brightness = <255>;
 			linux,default-trigger = "default-on";
 		};
 
 		led_red: pwm_red {
 			label = "pwm:red:user";
-			pwms = <&pwm0 1 10000000 0>;
+			pwms = <&pwm0 1 10000000 PWM_POLARITY_NORMAL>;
 			max-brightness = <255>;
 			linux,default-trigger = "default-on";
 		};
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index 4f123477e631..d9813299fd47 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -42,7 +42,7 @@ bl_reg: backlight-regulator {
 
 	panel_bl: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&hlcdc_pwm 0 100000 0>;
+		pwms = <&hlcdc_pwm 0 100000 PWM_POLARITY_NORMAL>;
 
 		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
 				     10 11 12 13 14 15 16 17 18 19
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
index 4d7cee569ff2..0ab4533ca789 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
@@ -105,7 +105,7 @@ pinctrl_usba_vbus: usba_vbus {
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&hlcdc_pwm 0 50000 0>;
+		pwms = <&hlcdc_pwm 0 50000 PWM_POLARITY_NORMAL>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index d36e162a8817..958c87abd865 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -189,7 +189,7 @@ usb0: ohci@500000 {
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&hlcdc_pwm 0 50000 0>;
+		pwms = <&hlcdc_pwm 0 50000 PWM_POLARITY_NORMAL>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		power-supply = <&bl_reg>;
diff --git a/arch/arm/boot/dts/at91sam9x5dm.dtsi b/arch/arm/boot/dts/at91sam9x5dm.dtsi
index a9278038af3b..a04ca0b08494 100644
--- a/arch/arm/boot/dts/at91sam9x5dm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5dm.dtsi
@@ -11,7 +11,7 @@
 / {
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&hlcdc_pwm 0 50000 0>;
+		pwms = <&hlcdc_pwm 0 50000 PWM_POLARITY_NORMAL>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		power-supply = <&bl_reg>;
diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
index 56fa951bc86f..12c19f45efad 100644
--- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
+++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
@@ -41,14 +41,14 @@ leds {
 
 		white {
 			label = "white";
-			pwms = <&pwm 0 600000 0>;
+			pwms = <&pwm 0 600000 PWM_POLARITY_NORMAL>;
 			max-brightness = <255>;
 			linux,default-trigger = "default-on";
 		};
 
 		red {
 			label = "red";
-			pwms = <&pwm 1 600000 0>;
+			pwms = <&pwm 1 600000 PWM_POLARITY_NORMAL>;
 			max-brightness = <255>;
 		};
 	};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index f2e7609e5346..d62503cb9a88 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -34,7 +34,7 @@ backlight: backlight-pwm {
 		 * schematic needs to be 1015171 (15 March 2010), Rev A
 		 * or newer.
 		 */
-		pwms = <&ecap2 0 50000 0>;
+		pwms = <&ecap2 0 50000 PWM_POLARITY_NORMAL>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
 		default-brightness-level = <7>;
 	};
diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
index afd04a423856..4dc42901c6f4 100644
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
@@ -118,7 +118,7 @@ sound {
 		compatible = "pwm-beeper";
 		pinctrl-names = "default";
 		pinctrl-0 = <&ehrpwm0b_pins>;
-		pwms = <&ehrpwm0 1 1000000 0>;
+		pwms = <&ehrpwm0 1 1000000 PWM_POLARITY_NORMAL>;
 		amp-supply = <&amp>;
 	};
 
@@ -185,7 +185,7 @@ bt_slow_clk: bt-clock {
 		compatible = "pwm-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
-		pwms = <&ecap2 0 30518 0>;
+		pwms = <&ecap2 0 30518 PWM_POLARITY_NORMAL>;
 	};
 
 	/* ARM local RAM */
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 3023bc3b68ce..ee64081abce9 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -171,7 +171,7 @@ charger_reg: CHARGER {
 			max77693_haptic {
 				compatible = "maxim,max77693-haptic";
 				haptic-supply = <&ldo26_reg>;
-				pwms = <&pwm 0 38022 0>;
+				pwms = <&pwm 0 38022 PWM_POLARITY_NORMAL>;
 			};
 
 			charger {
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index 8ff243ba4542..d97b290565e2 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -33,7 +33,7 @@ led1 {
 
 	fan0: pwm-fan {
 		compatible = "pwm-fan";
-		pwms = <&pwm 0 10000 0>;
+		pwms = <&pwm 0 10000 PWM_POLARITY_NORMAL>;
 		#cooling-cells = <2>;
 		cooling-levels = <0 102 170 230>;
 	};
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index c952a615148e..8b94b9d88f1e 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -196,7 +196,7 @@ xxti {
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 0 1000000 0>;
+		pwms = <&pwm 0 1000000 PWM_POLARITY_NORMAL>;
 		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
 		default-brightness-level = <7>;
 		enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index 4f9297ae0763..5edd2b94135a 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -37,7 +37,7 @@ emmc_pwrseq: pwrseq {
 
 	fan0: pwm-fan {
 		compatible = "pwm-fan";
-		pwms = <&pwm 0 20972 0>;
+		pwms = <&pwm 0 20972 PWM_POLARITY_NORMAL>;
 		#cooling-cells = <2>;
 		cooling-levels = <0 130 170 230>;
 	};
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 2bcbdf8a39bf..1a89f3783b42 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -34,7 +34,7 @@ aliases {
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 0 1000000 0>;
+		pwms = <&pwm 0 1000000 PWM_POLARITY_NORMAL>;
 		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
 		default-brightness-level = <7>;
 		power-supply = <&tps65090_fet1>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index 812659260278..c7d81c4d3465 100644
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -20,7 +20,7 @@ pwmleds {
 
 		blueled {
 			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
+			pwms = <&pwm 2 2000000 PWM_POLARITY_NORMAL>;
 			pwm-names = "pwm2";
 			max_brightness = <255>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 5da2d81e3be2..ecebb6867329 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -43,7 +43,7 @@ emmc_pwrseq: pwrseq {
 
 	fan0: pwm-fan {
 		compatible = "pwm-fan";
-		pwms = <&pwm 0 20972 0>;
+		pwms = <&pwm 0 20972 PWM_POLARITY_NORMAL>;
 		#cooling-cells = <2>;
 		cooling-levels = <0 130 170 230>;
 	};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
index 892d389d6d09..ef22f2b37dea 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
@@ -22,7 +22,7 @@ pwmleds {
 
 		blueled {
 			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
+			pwms = <&pwm 2 2000000 PWM_POLARITY_NORMAL>;
 			pwm-names = "pwm2";
 			max_brightness = <255>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
index 56acd832f0b3..90d80aa8b160 100644
--- a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
+++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
@@ -16,7 +16,7 @@ pwmleds {
 
 		greenled {
 			label = "green:mmc0";
-			pwms = <&pwm 1 2000000 0>;
+			pwms = <&pwm 1 2000000 PWM_POLARITY_NORMAL>;
 			pwm-names = "pwm1";
 			/*
 			 * Green LED is much brighter than the others
@@ -28,7 +28,7 @@ greenled {
 
 		blueled {
 			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
+			pwms = <&pwm 2 2000000 PWM_POLARITY_NORMAL>;
 			pwm-names = "pwm2";
 			max_brightness = <255>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 60ab0effe474..ef289c040a78 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -32,7 +32,7 @@ aliases {
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 0 1000000 0>;
+		pwms = <&pwm 0 1000000 PWM_POLARITY_NORMAL>;
 		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
 		default-brightness-level = <7>;
 		enable-gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts
index 6cdf2082c742..57d5d7fe3881 100644
--- a/arch/arm/boot/dts/imx53-tx53-x13x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x13x.dts
@@ -48,6 +48,7 @@
 /dts-v1/;
 #include "imx53-tx53.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "Ka-Ro electronics TX53 module (LVDS)";
@@ -61,7 +62,7 @@ aliases {
 
 	backlight0: backlight0 {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
+		pwms = <&pwm2 0 500000 PWM_POLARITY_NORMAL>;
 		power-supply = <&reg_3v3>;
 		brightness-levels = <
 			  0  1  2  3  4  5  6  7  8  9
@@ -81,7 +82,7 @@ backlight0: backlight0 {
 
 	backlight1: backlight1 {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 0>;
+		pwms = <&pwm1 0 500000 PWM_POLARITY_NORMAL>;
 		power-supply = <&reg_3v3>;
 		brightness-levels = <
 			  0  1  2  3  4  5  6  7  8  9
diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
index 51a9bb9d6bc2..12c43823b1ed 100644
--- a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
@@ -50,7 +50,7 @@ / {
 };
 
 &backlight {
-	pwms = <&pwm2 0 500000 0>;
+	pwms = <&pwm2 0 500000 PWM_POLARITY_NORMAL>;
 	/delete-property/ turn-on-delay-ms;
 };
 
diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi
index 83524bb99eb3..b37382b0a4f1 100644
--- a/arch/arm/boot/dts/imx6q-display5.dtsi
+++ b/arch/arm/boot/dts/imx6q-display5.dtsi
@@ -56,7 +56,7 @@ backlight_lvds: backlight {
 		compatible = "pwm-backlight";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_backlight>;
-		pwms = <&pwm2 0 5000000 0>;
+		pwms = <&pwm2 0 5000000 PWM_POLARITY_NORMAL>;
 		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
 				      10  11  12  13  14  15  16  17  18  19
 				      20  21  22  23  24  25  26  27  28  29
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
index ac3050a835e5..507133858719 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
@@ -50,7 +50,7 @@ / {
 };
 
 &backlight {
-	pwms = <&pwm2 0 500000 0>;
+	pwms = <&pwm2 0 500000 PWM_POLARITY_NORMAL>;
 	/delete-property/ turn-on-delay-ms;
 };
 
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
index a773f252816c..6656da97c7d2 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
@@ -50,7 +50,7 @@ / {
 };
 
 &backlight {
-	pwms = <&pwm2 0 500000 0>;
+	pwms = <&pwm2 0 500000 PWM_POLARITY_NORMAL>;
 	/delete-property/ turn-on-delay-ms;
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi
index 2ca2eb37e14f..04387d0fe8f3 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi
@@ -48,7 +48,7 @@ aliases {
 
 	backlight0: backlight0 {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
+		pwms = <&pwm2 0 500000 PWM_POLARITY_NORMAL>;
 		power-supply = <&reg_lcd0_pwr>;
 		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
 				     10 11 12 13 14 15 16 17 18 19
@@ -66,7 +66,7 @@ backlight0: backlight0 {
 
 	backlight1: backlight1 {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 0>;
+		pwms = <&pwm1 0 500000 PWM_POLARITY_NORMAL>;
 		power-supply = <&reg_lcd1_pwr>;
 		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
 				     10 11 12 13 14 15 16 17 18 19
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index dbb98b03f9ad..4b0d8f35e119 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -4,12 +4,14 @@
  *
  */
 
+#include <dt-bindings/pwm/pwm.h>
+
 / {
 	bl: backlight {
 		compatible = "pwm-backlight";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		pwms = <&pwm1 0 5000000 0>;
+		pwms = <&pwm1 0 5000000 PWM_POLARITY_NORMAL>;
 		enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
 	};
 
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index 6b4acea1ef79..b3e32b3a7a35 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "imx7d.dtsi"
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "Boundary Devices i.MX7 Nitrogen7 Board";
@@ -26,7 +27,7 @@ backlight-j9 {
 
 	backlight_lcd: backlight-j20 {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000 0>;
+		pwms = <&pwm1 0 5000000 PWM_POLARITY_NORMAL>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
index e57da0d32b98..08f0f46f1e60 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -5,11 +5,12 @@
 /dts-v1/;
 
 #include "imx7d.dtsi"
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 50000 0>;
+		pwms = <&pwm4 0 50000 PWM_POLARITY_NORMAL>;
 		brightness-levels = <0 36 72 108 144 180 216 255>;
 		default-brightness-level = <6>;
 	};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 869efbc4af42..e924ee8eddcb 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -5,6 +5,7 @@
 /dts-v1/;
 
 #include "imx7d.dtsi"
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "Freescale i.MX7 SabreSD Board";
@@ -129,7 +130,7 @@ reg_fec2_3v3: regulator-fec2-3v3 {
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000 0>;
+		pwms = <&pwm1 0 5000000 PWM_POLARITY_NORMAL>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
diff --git a/arch/arm/boot/dts/imx7ulp-evk.dts b/arch/arm/boot/dts/imx7ulp-evk.dts
index eff51e113db4..818bc0fac3d4 100644
--- a/arch/arm/boot/dts/imx7ulp-evk.dts
+++ b/arch/arm/boot/dts/imx7ulp-evk.dts
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include "imx7ulp.dtsi"
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "NXP i.MX7ULP EVK";
@@ -24,7 +25,7 @@ memory@60000000 {
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&tpm4 1 50000 0>;
+		pwms = <&tpm4 1 50000 PWM_POLARITY_NORMAL>;
 		brightness-levels = <0 20 25 30 35 40 100>;
 		default-brightness-level = <6>;
 		status = "okay";
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index ebbe1518ef8a..e9ea04540c16 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -49,7 +49,7 @@ audio_clock: audio_clock {
 	lcd_backlight: backlight {
 		compatible = "pwm-backlight";
 
-		pwms = <&pwm3 0 5000000 0>;
+		pwms = <&pwm3 0 5000000 PWM_POLARITY_NORMAL>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
index f7b82ced4080..4bf696c3c242 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
@@ -149,7 +149,7 @@ bl: backlight {
 		compatible = "pwm-backlight";
 		pinctrl-names = "default";
 		pinctrl-0 = <&backlight_pins>;
-		pwms = <&pwm10 0 5000000 0>;
+		pwms = <&pwm10 0 5000000 PWM_POLARITY_NORMAL>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <7>;
 		enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts
index 163a200d5a7b..0380206eb13f 100644
--- a/arch/arm/boot/dts/meson8b-ec100.dts
+++ b/arch/arm/boot/dts/meson8b-ec100.dts
@@ -150,7 +150,7 @@ vcck: regulator-vcck {
 
 		vin-supply = <&vcc_5v>;
 
-		pwms = <&pwm_cd 0 1148 0>;
+		pwms = <&pwm_cd 0 1148 PWM_POLARITY_NORMAL>;
 		pwm-dutycycle-range = <100 0>;
 
 		regulator-boot-on;
@@ -234,7 +234,7 @@ vddee: regulator-vddee {
 
 		vin-supply = <&vcc_5v>;
 
-		pwms = <&pwm_cd 1 1148 0>;
+		pwms = <&pwm_cd 1 1148 PWM_POLARITY_NORMAL>;
 		pwm-dutycycle-range = <100 0>;
 
 		regulator-boot-on;
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts
index 33037ef62d0a..910942d4785a 100644
--- a/arch/arm/boot/dts/meson8b-mxq.dts
+++ b/arch/arm/boot/dts/meson8b-mxq.dts
@@ -39,7 +39,7 @@ vcck: regulator-vcck {
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		pwms = <&pwm_cd 0 1148 0>;
+		pwms = <&pwm_cd 0 1148 PWM_POLARITY_NORMAL>;
 		pwm-dutycycle-range = <100 0>;
 
 		regulator-boot-on;
@@ -86,7 +86,7 @@ vddee: regulator-vddee {
 
 		vin-supply = <&vcc_5v>;
 
-		pwms = <&pwm_cd 1 1148 0>;
+		pwms = <&pwm_cd 1 1148 PWM_POLARITY_NORMAL>;
 		pwm-dutycycle-range = <100 0>;
 
 		regulator-boot-on;
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index a2a47804fc4a..cb7411fc6d84 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -132,7 +132,7 @@ vcck: regulator-vcck {
 
 		vin-supply = <&p5v0>;
 
-		pwms = <&pwm_cd 0 12218 0>;
+		pwms = <&pwm_cd 0 12218 PWM_POLARITY_NORMAL>;
 		pwm-dutycycle-range = <91 0>;
 
 		regulator-boot-on;
@@ -164,7 +164,7 @@ vddee: regulator-vddee {
 
 		vin-supply = <&p5v0>;
 
-		pwms = <&pwm_cd 1 12218 0>;
+		pwms = <&pwm_cd 1 12218 PWM_POLARITY_NORMAL>;
 		pwm-dutycycle-range = <91 0>;
 
 		regulator-boot-on;
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
index b6e82b165f5c..87b78dbe4b42 100644
--- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -178,7 +178,8 @@ pwm9: dmtimer-pwm-9 {
 
 	vibrator {
 		compatible = "pwm-vibrator";
-		pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
+		pwms = <&pwm9 0 10000000 PWM_POLARITY_NORMAL>,
+		       <&pwm8 0 10000000 PWM_POLARITY_NORMAL>;
 		pwm-names = "enable", "direction";
 		direction-duty-cycle-ns = <10000000>;
 	};
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 409a758c99f1..a30278267ac2 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -138,7 +138,7 @@ lcd_in: endpoint {
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm11 0 12000000 0>;
+		pwms = <&pwm11 0 12000000 PWM_POLARITY_NORMAL>;
 		pwm-names = "backlight";
 		brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <9>;	/* => 90 */
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 4089d97405c9..99e5f0e5a271 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -152,7 +152,7 @@ pwm9: dmtimer-pwm {
 
 	ir: n900-ir {
 		compatible = "nokia,n900-ir";
-		pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
+		pwms = <&pwm9 0 26316 PWM_POLARITY_NORMAL>; /* 38000 Hz */
 	};
 
 	rom_rng: rng {
diff --git a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
index 32c0f10765dd..56404139ac28 100644
--- a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
@@ -47,7 +47,7 @@ backlight: backlight {
 		enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&bl_en>;
-		pwms = <&pwm0 0 1000000 0>;
+		pwms = <&pwm0 0 1000000 PWM_POLARITY_NORMAL>;
 		post-pwm-on-delay-ms = <10>;
 		pwm-off-delay-ms = <10>;
 		power-supply = <&backlight_regulator>;
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 54a6838d73f5..58dd4fbd057c 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -101,7 +101,7 @@ vdd_logic: vdd-logic {
 		compatible = "pwm-regulator";
 		regulator-name = "vdd_logic";
 
-		pwms = <&pwm1 0 1994 0>;
+		pwms = <&pwm1 0 1994 PWM_POLARITY_NORMAL>;
 		pwm-supply = <&vcc33_sys>;
 
 		pwm-dutycycle-range = <0x7b 0>;
diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts
index 30f3d0470ad9..dc7efab6af93 100644
--- a/arch/arm/boot/dts/rv1108-evb.dts
+++ b/arch/arm/boot/dts/rv1108-evb.dts
@@ -53,7 +53,7 @@ backlight: backlight {
 			240 241 242 243 244 245 246 247
 			248 249 250 251 252 253 254 255>;
 		default-brightness-level = <200>;
-		pwms = <&pwm0 0 25000 0>;
+		pwms = <&pwm0 0 25000 PWM_POLARITY_NORMAL>;
 	};
 
 	vcc_sys: vsys-regulator {
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
index 1aeac33b0d34..30814ae5c09d 100644
--- a/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -159,7 +159,7 @@ led-4 {
 
 	buzzer {
 		compatible = "pwm-beeper";
-		pwms = <&pwm 0 1000000 0>;
+		pwms = <&pwm 0 1000000 PWM_POLARITY_NORMAL>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm0_out>;
 	};
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 8ff70b856334..68c909588fa8 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -324,7 +324,7 @@ fuelgauge@36 {
 
 	vibrator: pwm-vibrator {
 		compatible = "pwm-vibrator";
-		pwms = <&pwm 1 44642 0>;
+		pwms = <&pwm 1 44642 PWM_POLARITY_NORMAL>;
 		pwm-names = "enable";
 		vcc-supply = <&vibrator_pwr>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts
index 84b38f185199..440c6811ff58 100644
--- a/arch/arm/boot/dts/s5pv210-smdkv210.dts
+++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts
@@ -42,7 +42,7 @@ ethernet@18000000 {
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000 0>;
+		pwms = <&pwm 3 5000000 PWM_POLARITY_NORMAL>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts
index 4c20d731a9c6..0e4e2cee3a64 100644
--- a/arch/arm/boot/dts/sun5i-gr8-evb.dts
+++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts
@@ -69,7 +69,7 @@ chosen {
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 0 10000 0>;
+		pwms = <&pwm 0 10000 PWM_POLARITY_NORMAL>;
 		enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
 
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index fba37b8756f7..ff7c703cde4f 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -39,6 +39,8 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <dt-bindings/pwm/pwm.h>
+
 / {
 	aliases {
 		ethernet0 = &fec1;
@@ -49,7 +51,7 @@ bl: backlight {
 		compatible = "pwm-backlight";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		pwms = <&pwm0 0 5000000 0>;
+		pwms = <&pwm0 0 5000000 PWM_POLARITY_NORMAL>;
 		enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 	};
-- 
2.24.1


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [RFC PATCH 7/7] arm: dts: pwm: replace polarity constant with macro
  2020-03-17 12:32 ` [RFC PATCH 7/7] arm: dts: pwm: replace polarity constant with macro Oleksandr Suvorov
@ 2020-03-20 10:02   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 2+ messages in thread
From: Krzysztof Kozlowski @ 2020-03-20 10:02 UTC (permalink / raw)
  To: Oleksandr Suvorov
  Cc: devicetree, linux-pwm, Paul Barker, Uwe Kleine-König,
	Laurent Pinchart, Marcel Ziswiler, Igor Opaniuk,
	Philippe Schenker, Alexandre Belloni, Bartosz Golaszewski,
	Benoît Cousson, Chen-Yu Tsai, David Lechner, Fabio Estevam,
	Geert Uytterhoeven, Heiko Stuebner, Jisheng Zhang, Kevin Hilman,
	Kukjin Kim, Ludovic Desroches, Magnus Damm, Maxime Ripard,
	NXP Linux Team, Nicolas Ferre, Pengutronix Kernel Team,
	Peter Rosin, Rob Herring, Sascha Hauer, Sebastian Hesselbarth,
	Sekhar Nori, Shawn Guo, Stefan Agner, Tony Lindgren,
	linux-amlogic, linux-arm-kernel, linux-kernel, linux-omap,
	linux-renesas-soc, linux-rockchip, linux-samsung-soc

On Tue, Mar 17, 2020 at 02:32:31PM +0200, Oleksandr Suvorov wrote:
> There is the PWM_POLARITY_NORMAL defined and describled in
> <dt-bindings/pwm/pwm.h> and used by pwm drivers.
> 
> This patch converts all '0' constant in pwms parameters into
> PWM_POLARITY_NORMAL.
> 
> Replace with sed regexp:
> 's/(pwms = <&[a-zA-Z_0-9]+ [0-9]+ [0-9]+) 0>/\1 PWM_POLARITY_NORMAL>/'
> 
> Then:
> - included pwm.h in some dts/dtsi to fix building errors about undefined
>   symbols.
> - fixed the patman warnings about the code format;
> 
> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
> ---
> 
>  arch/arm/boot/dts/am335x-cm-t335.dts               | 2 +-
>  arch/arm/boot/dts/am335x-evm.dts                   | 2 +-
>  arch/arm/boot/dts/am3517-evm.dts                   | 2 +-
>  arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi      | 2 +-
>  arch/arm/boot/dts/at91-kizbox2-common.dtsi         | 6 +++---
>  arch/arm/boot/dts/at91-kizbox3_common.dtsi         | 8 ++++----
>  arch/arm/boot/dts/at91-kizboxmini-common.dtsi      | 6 +++---
>  arch/arm/boot/dts/at91-nattis-2-natte-2.dts        | 2 +-
>  arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts        | 2 +-
>  arch/arm/boot/dts/at91sam9n12ek.dts                | 2 +-
>  arch/arm/boot/dts/at91sam9x5dm.dtsi                | 2 +-
>  arch/arm/boot/dts/berlin2cd-google-chromecast.dts  | 4 ++--
>  arch/arm/boot/dts/da850-evm.dts                    | 2 +-
>  arch/arm/boot/dts/da850-lego-ev3.dts               | 4 ++--
>  arch/arm/boot/dts/exynos4412-midas.dtsi            | 2 +-
>  arch/arm/boot/dts/exynos4412-odroidu3.dts          | 2 +-
>  arch/arm/boot/dts/exynos5250-snow-common.dtsi      | 2 +-
>  arch/arm/boot/dts/exynos5410-odroidxu.dts          | 2 +-
>  arch/arm/boot/dts/exynos5420-peach-pit.dts         | 2 +-
>  arch/arm/boot/dts/exynos5422-odroidhc1.dts         | 2 +-
>  arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 +-
>  arch/arm/boot/dts/exynos5422-odroidxu4.dts         | 2 +-
>  arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi    | 4 ++--
>  arch/arm/boot/dts/exynos5800-peach-pi.dts          | 2 +-
>  arch/arm/boot/dts/imx53-tx53-x13x.dts              | 5 +++--
>  arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts          | 2 +-
>  arch/arm/boot/dts/imx6q-display5.dtsi              | 2 +-
>  arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts       | 2 +-
>  arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts       | 2 +-
>  arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi            | 4 ++--
>  arch/arm/boot/dts/imx7-colibri.dtsi                | 4 +++-
>  arch/arm/boot/dts/imx7d-nitrogen7.dts              | 3 ++-
>  arch/arm/boot/dts/imx7d-pico.dtsi                  | 3 ++-
>  arch/arm/boot/dts/imx7d-sdb.dts                    | 3 ++-
>  arch/arm/boot/dts/imx7ulp-evk.dts                  | 3 ++-
>  arch/arm/boot/dts/iwg20d-q7-common.dtsi            | 2 +-
>  arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi   | 2 +-
>  arch/arm/boot/dts/meson8b-ec100.dts                | 4 ++--
>  arch/arm/boot/dts/meson8b-mxq.dts                  | 4 ++--
>  arch/arm/boot/dts/meson8b-odroidc1.dts             | 4 ++--
>  arch/arm/boot/dts/motorola-mapphone-common.dtsi    | 3 ++-
>  arch/arm/boot/dts/omap3-gta04.dtsi                 | 2 +-
>  arch/arm/boot/dts/omap3-n900.dts                   | 2 +-
>  arch/arm/boot/dts/rk3288-veyron-edp.dtsi           | 2 +-
>  arch/arm/boot/dts/rk3288-veyron.dtsi               | 2 +-
>  arch/arm/boot/dts/rv1108-evb.dts                   | 2 +-
>  arch/arm/boot/dts/s3c6410-mini6410.dts             | 2 +-
>  arch/arm/boot/dts/s5pv210-aries.dtsi               | 2 +-
>  arch/arm/boot/dts/s5pv210-smdkv210.dts             | 2 +-

For Exynos/S3C/S5P:
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20200317123231.2843297-1-oleksandr.suvorov@toradex.com>
2020-03-17 12:32 ` [RFC PATCH 7/7] arm: dts: pwm: replace polarity constant with macro Oleksandr Suvorov
2020-03-20 10:02   ` Krzysztof Kozlowski

Linux-OMAP Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-omap/0 linux-omap/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-omap linux-omap/ https://lore.kernel.org/linux-omap \
		linux-omap@vger.kernel.org
	public-inbox-index linux-omap

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-omap


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git