From: David Shah <dave@ds0.me>
To: letux-kernel@openphoenux.org, kernel@pyra-handheld.com,
linux-omap@vger.kernel.org, tony@atomide.com
Subject: [PATCH] omap5: Fix DSI base address and clocks
Date: Tue, 18 Aug 2020 10:51:00 +0100 [thread overview]
Message-ID: <20200818095100.25412-1-dave@ds0.me> (raw)
DSI was not probing due to base address off by 0x1000, and sys_clk
missing.
With this patch, the Pyra display works if HDMI is disabled in the
device tree.
Signed-off-by: David Shah <dave@ds0.me>
---
arch/arm/boot/dts/omap5.dtsi | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index c96e19a15c52..849a2dd9fef7 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -388,11 +388,11 @@ rfbi: encoder@0 {
};
};
- target-module@5000 {
+ target-module@4000 {
compatible = "ti,sysc-omap2", "ti,sysc";
- reg = <0x5000 0x4>,
- <0x5010 0x4>,
- <0x5014 0x4>;
+ reg = <0x4000 0x4>,
+ <0x4010 0x4>,
+ <0x4014 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
@@ -404,7 +404,7 @@ SYSC_OMAP2_SOFTRESET |
ti,syss-mask = <1>;
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0x5000 0x1000>;
+ ranges = <0 0x4000 0x1000>;
dsi1: encoder@0 {
compatible = "ti,omap5-dsi";
@@ -414,8 +414,9 @@ dsi1: encoder@0 {
reg-names = "proto", "phy", "pll";
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
- clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
- clock-names = "fck";
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
+ <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
+ clock-names = "fck", "sys_clk";
};
};
@@ -445,8 +446,9 @@ dsi2: encoder@0 {
reg-names = "proto", "phy", "pll";
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
- clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
- clock-names = "fck";
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
+ <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
+ clock-names = "fck", "sys_clk";
};
};
--
2.28.0
next reply other threads:[~2020-08-18 9:51 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-18 9:51 David Shah [this message]
2020-08-18 9:58 ` [Letux-kernel] [PATCH] omap5: Fix DSI base address and clocks H. Nikolaus Schaller
2020-08-19 5:58 ` Tony Lindgren
2020-08-19 8:39 ` David Shah
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200818095100.25412-1-dave@ds0.me \
--to=dave@ds0.me \
--cc=kernel@pyra-handheld.com \
--cc=letux-kernel@openphoenux.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).