From: Krzysztof Kozlowski <krzk@kernel.org>
To: "Linus Walleij" <linus.walleij@linaro.org>,
"Bartosz Golaszewski" <bgolaszewski@baylibre.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Benoît Cousson" <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>,
"Joel Stanley" <joel@jms.id.au>,
"Andrew Jeffery" <andrew@aj.id.au>,
"Jason Cooper" <jason@lakedaemon.net>,
"Andrew Lunn" <andrew@lunn.ch>,
"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
"Gregory Clement" <gregory.clement@bootlin.com>,
"Shawn Guo" <shawnguo@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Stefan Agner" <stefan@agner.ch>,
linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH 1/6] dt-bindings: gpio: Convert bindings for NXP PCA953x family to dtschema
Date: Sat, 29 Aug 2020 11:40:19 +0200 [thread overview]
Message-ID: <20200829094024.31842-1-krzk@kernel.org> (raw)
Convert the NXP PCA953x family of GPIO expanders bindings to device tree
schema.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../devicetree/bindings/gpio/gpio-pca953x.txt | 90 ------------
.../bindings/gpio/gpio-pca95xx.yaml | 138 ++++++++++++++++++
.../devicetree/bindings/trivial-devices.yaml | 4 -
3 files changed, 138 insertions(+), 94 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
deleted file mode 100644
index 3126c3817e2a..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
+++ /dev/null
@@ -1,90 +0,0 @@
-* NXP PCA953x I2C GPIO multiplexer
-
-Required properties:
- - compatible: Has to contain one of the following:
- nxp,pca6416
- nxp,pca9505
- nxp,pca9534
- nxp,pca9535
- nxp,pca9536
- nxp,pca9537
- nxp,pca9538
- nxp,pca9539
- nxp,pca9554
- nxp,pca9555
- nxp,pca9556
- nxp,pca9557
- nxp,pca9574
- nxp,pca9575
- nxp,pca9698
- nxp,pcal6416
- nxp,pcal6524
- nxp,pcal9535
- nxp,pcal9555a
- maxim,max7310
- maxim,max7312
- maxim,max7313
- maxim,max7315
- ti,pca6107
- ti,pca9536
- ti,tca6408
- ti,tca6416
- ti,tca6424
- ti,tca9539
- ti,tca9554
- onnn,cat9554
- onnn,pca9654
- exar,xra1202
- - gpio-controller: if used as gpio expander.
- - #gpio-cells: if used as gpio expander.
- - interrupt-controller: if to be used as interrupt expander.
- - #interrupt-cells: if to be used as interrupt expander.
-
-Optional properties:
- - interrupts: interrupt specifier for the device's interrupt output.
- - reset-gpios: GPIO specification for the RESET input. This is an
- active low signal to the PCA953x.
- - vcc-supply: power supply regulator.
-
-Example:
-
-
- gpio@20 {
- compatible = "nxp,pca9505";
- reg = <0x20>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pca9505>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-parent = <&gpio3>;
- interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
- };
-
-
-Example with Interrupts:
-
-
- gpio99: gpio@22 {
- compatible = "nxp,pcal6524";
- reg = <0x22>;
- interrupt-parent = <&gpio6>;
- interrupts = <1 IRQ_TYPE_EDGE_FALLING>; /* gpio6_161 */
- interrupt-controller;
- #interrupt-cells = <2>;
- vcc-supply = <&vdds_1v8_main>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-line-names =
- "hdmi-ct-hpd", "hdmi.ls-oe", "p02", "p03", "vibra", "fault2", "p06", "p07",
- "en-usb", "en-host1", "en-host2", "chg-int", "p14", "p15", "mic-int", "en-modem",
- "shdn-hs-amp", "chg-status+red", "green", "blue", "en-esata", "fault1", "p26", "p27";
- };
-
- ts3a227@3b {
- compatible = "ti,ts3a227e";
- reg = <0x3b>;
- interrupt-parent = <&gpio99>;
- interrupts = <14 IRQ_TYPE_EDGE_RISING>;
- ti,micbias = <0>; /* 2.1V */
- };
-
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
new file mode 100644
index 000000000000..c5bb24b3b7b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-pca95xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA95xx I2C GPIO multiplexer
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - exar,xra1202
+ - maxim,max7310
+ - maxim,max7312
+ - maxim,max7313
+ - maxim,max7315
+ - nxp,pca6416
+ - nxp,pca9505
+ - nxp,pca9534
+ - nxp,pca9535
+ - nxp,pca9536
+ - nxp,pca9537
+ - nxp,pca9538
+ - nxp,pca9539
+ - nxp,pca9554
+ - nxp,pca9555
+ - nxp,pca9556
+ - nxp,pca9557
+ - nxp,pca9574
+ - nxp,pca9575
+ - nxp,pca9698
+ - nxp,pcal6416
+ - nxp,pcal6524
+ - nxp,pcal9535
+ - nxp,pcal9555a
+ - onnn,cat9554
+ - onnn,pca9654
+ - ti,pca6107
+ - ti,pca9536
+ - ti,tca6408
+ - ti,tca6416
+ - ti,tca6424
+ - ti,tca9539
+ - ti,tca9554
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-line-names:
+ minItems: 1
+ maxItems: 32
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ reset-gpios:
+ description:
+ GPIO specification for the RESET input. This is an active low signal to
+ the PCA953x.
+
+ vcc-supply:
+ description:
+ Optional power supply
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - "#gpio-cells"
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio@20 {
+ compatible = "nxp,pca9505";
+ reg = <0x20>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pca9505>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio99: gpio@22 {
+ compatible = "nxp,pcal6524";
+ reg = <0x22>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>; /* gpio6_161 */
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ vcc-supply = <&vdds_1v8_main>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "hdmi-ct-hpd", "hdmi.ls-oe", "p02", "p03",
+ "vibra", "fault2", "p06", "p07", "en-usb",
+ "en-host1", "en-host2", "chg-int", "p14", "p15",
+ "mic-int", "en-modem", "shdn-hs-amp",
+ "chg-status+red", "green", "blue", "en-esata",
+ "fault1", "p26", "p27";
+ };
+
+ ts3a227@3b {
+ compatible = "ti,ts3a227e";
+ reg = <0x3b>;
+ interrupt-parent = <&gpio99>;
+ interrupts = <14 IRQ_TYPE_EDGE_RISING>;
+ ti,micbias = <0>; /* 2.1V */
+ };
+ };
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 4ace8039840a..d0d00f2ae7f6 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -306,10 +306,6 @@ properties:
- nuvoton,npct601
# Nuvoton Temperature Sensor
- nuvoton,w83773g
- # Octal SMBus and I2C registered interface
- - nxp,pca9556
- # 8-bit I2C-bus and SMBus I/O port with reset
- - nxp,pca9557
# OKI ML86V7667 video decoder
- oki,ml86v7667
# OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI and Embedded TrueFocus
--
2.17.1
next reply other threads:[~2020-08-29 9:40 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-29 9:40 Krzysztof Kozlowski [this message]
2020-08-29 9:40 ` [PATCH 2/6] dt-bindings: gpio: Convert bindings for Maxim MAX732x family to dtschema Krzysztof Kozlowski
2020-09-14 18:12 ` Rob Herring
2020-08-29 9:40 ` [PATCH 3/6] ARM: dts: am335x: lxm: Fix PCA9539 GPIO expander properties Krzysztof Kozlowski
2020-09-03 8:31 ` Tony Lindgren
2020-08-29 9:40 ` [PATCH 4/6] ARM: dts: aspeed: Fix PCA95xx GPIO expander properties on Portwell Krzysztof Kozlowski
2020-09-10 16:53 ` Krzysztof Kozlowski
2020-08-29 9:40 ` [PATCH 5/6] ARM: dts: dove: Fix PCA95xx GPIO expander properties on A510 Krzysztof Kozlowski
2020-09-12 9:41 ` Linus Walleij
2020-08-29 9:40 ` [PATCH 6/6] ARM: dts: vf: Fix PCA95xx GPIO expander properties on ZII CFU1 Krzysztof Kozlowski
2020-09-05 6:16 ` Shawn Guo
2020-09-10 16:54 ` [PATCH 1/6] dt-bindings: gpio: Convert bindings for NXP PCA953x family to dtschema Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200829094024.31842-1-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=andrew@aj.id.au \
--cc=andrew@lunn.ch \
--cc=bcousson@baylibre.com \
--cc=bgolaszewski@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=jason@lakedaemon.net \
--cc=joel@jms.id.au \
--cc=kernel@pengutronix.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sebastian.hesselbarth@gmail.com \
--cc=shawnguo@kernel.org \
--cc=stefan@agner.ch \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).