[PATCH] ARM: dts: dra7xx: replace status value "ok" by "okay"

[PATCH] ARM: dts: dra7xx: replace status value "ok" by "okay"

[Adrian Schmutzler]

While the DT parser recognizes "ok" as a valid value for the
"status" property, it is actually mentioned nowhere. Use the
proper value "okay" instead, as done in the majority of files
already.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
---
 arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 6 +++---
 arch/arm/boot/dts/am57xx-sbc-am57x.dts          | 4 ++--
 arch/arm/boot/dts/dra7-evm.dts                  | 2 +-
 arch/arm/boot/dts/dra72-evm-common.dtsi         | 6 +++---
 arch/arm/boot/dts/dra76-evm.dts                 | 4 ++--
 5 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index b3a0206ebd6c..1809f97d491d 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -582,13 +582,13 @@
 };
 
 &dss {
-	status = "ok";
+	status = "okay";
 
 	vdda_video-supply = <&ldoln_reg>;
 };
 
 &hdmi {
-	status = "ok";
+	status = "okay";
 	vdda-supply = <&ldo4_reg>;
 
 	port {
@@ -599,7 +599,7 @@
 };
 
 &pcie1_rc {
-	status = "ok";
+	status = "okay";
 	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
 };
 
diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
index ce5bf1d92eab..beef63e8a005 100644
--- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
@@ -120,7 +120,7 @@
 };
 
 &dss {
-	status = "ok";
+	status = "okay";
 
 	vdda_video-supply = <&ldoln_reg>;
 
@@ -148,7 +148,7 @@
 };
 
 &hdmi {
-	status = "ok";
+	status = "okay";
 	vdda-supply = <&ldo4_reg>;
 
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index a952d934fcf2..bda6f7eeef4f 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -565,7 +565,7 @@
 };
 
 &dcan1 {
-	status = "ok";
+	status = "okay";
 	pinctrl-names = "default", "sleep", "active";
 	pinctrl-0 = <&dcan1_pins_sleep>;
 	pinctrl-1 = <&dcan1_pins_sleep>;
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index 9273a7d6fa29..7506e415b08f 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -467,7 +467,7 @@
 };
 
 &dcan1 {
-	status = "ok";
+	status = "okay";
 	pinctrl-names = "default", "sleep", "active";
 	pinctrl-0 = <&dcan1_pins_sleep>;
 	pinctrl-1 = <&dcan1_pins_sleep>;
@@ -536,11 +536,11 @@
 };
 
 &dss {
-	status = "ok";
+	status = "okay";
 };
 
 &hdmi {
-	status = "ok";
+	status = "okay";
 
 	port {
 		hdmi_out: endpoint {
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 803981cc762e..81590ef36937 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -522,12 +522,12 @@
 };
 
 &dss {
-	status = "ok";
+	status = "okay";
 	vdda_video-supply = <&ldo5_reg>;
 };
 
 &hdmi {
-	status = "ok";
+	status = "okay";
 
 	vdda-supply = <&ldo1_reg>;
 
-- 
2.20.1

Re: [PATCH] ARM: dts: dra7xx: replace status value "ok" by "okay"

[Tony Lindgren]

* Adrian Schmutzler <freifunk@adrianschmutzler.de> [200830 22:50]:
> While the DT parser recognizes "ok" as a valid value for the
> "status" property, it is actually mentioned nowhere. Use the
> proper value "okay" instead, as done in the majority of files
> already.

Thanks applying into omap-for-v5.10/dt.

Tony