[PATCH AUTOSEL 4.14 010/127] clk/ti/adpll: allocate room for terminating null

[PATCH AUTOSEL 4.14 010/127] clk/ti/adpll: allocate room for terminating null

[Sasha Levin]

From: Stephen Kitt <steve@sk2.org>

[ Upstream commit 7f6ac72946b88b89ee44c1c527aa8591ac5ffcbe ]

The buffer allocated in ti_adpll_clk_get_name doesn't account for the
terminating null. This patch switches to devm_kasprintf to avoid
overflowing.

Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lkml.kernel.org/r/20191019140634.15596-1-steve@sk2.org
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/ti/adpll.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/clk/ti/adpll.c b/drivers/clk/ti/adpll.c
index d6036c788fab8..2738ecb1511b1 100644
--- a/drivers/clk/ti/adpll.c
+++ b/drivers/clk/ti/adpll.c
@@ -193,15 +193,8 @@ static const char *ti_adpll_clk_get_name(struct ti_adpll_data *d,
 		if (err)
 			return NULL;
 	} else {
-		const char *base_name = "adpll";
-		char *buf;
-
-		buf = devm_kzalloc(d->dev, 8 + 1 + strlen(base_name) + 1 +
-				    strlen(postfix), GFP_KERNEL);
-		if (!buf)
-			return NULL;
-		sprintf(buf, "%08lx.%s.%s", d->pa, base_name, postfix);
-		name = buf;
+		name = devm_kasprintf(d->dev, GFP_KERNEL, "%08lx.adpll.%s",
+				      d->pa, postfix);
 	}
 
 	return name;
-- 
2.25.1

[PATCH AUTOSEL 4.14 109/127] usb: dwc3: Increase timeout for CmdAct cleared by device controller

[Sasha Levin]

From: Yu Chen <chenyu56@huawei.com>

[ Upstream commit 1c0e69ae1b9f9004fd72978612ae3463791edc56 ]

If the SS PHY is in P3, there is no pipe_clk, HW may use suspend_clk
for function, as suspend_clk is slow so EP command need more time to
complete, e.g, imx8M suspend_clk is 32K, set ep configuration will
take about 380us per below trace time stamp(44.286278 - 44.285897
= 0.000381):

configfs_acm.sh-822   [000] d..1    44.285896: dwc3_writel: addr
000000006d59aae1 value 00000401
configfs_acm.sh-822   [000] d..1    44.285897: dwc3_readl: addr
000000006d59aae1 value 00000401
... ...
configfs_acm.sh-822   [000] d..1    44.286278: dwc3_readl: addr
000000006d59aae1 value 00000001
configfs_acm.sh-822   [000] d..1    44.286279: dwc3_gadget_ep_cmd:
ep0out: cmd 'Set Endpoint Configuration' [401] params 00001000
00000500 00000000 --> status: Successful

This was originally found on Hisilicon Kirin Soc that need more time
for the device controller to clear the CmdAct of DEPCMD.

Signed-off-by: Yu Chen <chenyu56@huawei.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/gadget.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 4149d751719e3..4a42368734644 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -276,7 +276,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
 {
 	const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
 	struct dwc3		*dwc = dep->dwc;
-	u32			timeout = 1000;
+	u32			timeout = 5000;
 	u32			saved_config = 0;
 	u32			reg;
 
-- 
2.25.1