linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vladimir Oltean <olteanv@gmail.com>
To: Jakub Kicinski <kuba@kernel.org>,
	"David S. Miller" <davem@davemloft.net>
Cc: Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	bridge@lists.linux-foundation.org,
	Roopa Prabhu <roopa@nvidia.com>,
	Nikolay Aleksandrov <nikolay@nvidia.com>,
	Jiri Pirko <jiri@resnulli.us>, Ido Schimmel <idosch@idosch.org>,
	Claudiu Manoil <claudiu.manoil@nxp.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	UNGLinuxDriver@microchip.com, Vadym Kochan <vkochan@marvell.com>,
	Taras Chornyi <tchornyi@marvell.com>,
	Grygorii Strashko <grygorii.strashko@ti.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Ioana Ciornei <ioana.ciornei@nxp.com>,
	Ivan Vecera <ivecera@redhat.com>,
	linux-omap@vger.kernel.org
Subject: [PATCH v5 net-next 08/10] net: mscc: ocelot: use separate flooding PGID for broadcast
Date: Fri, 12 Feb 2021 17:15:58 +0200	[thread overview]
Message-ID: <20210212151600.3357121-9-olteanv@gmail.com> (raw)
In-Reply-To: <20210212151600.3357121-1-olteanv@gmail.com>

From: Vladimir Oltean <vladimir.oltean@nxp.com>

In preparation of offloading the bridge port flags which have
independent settings for unknown multicast and for broadcast, we should
also start reserving one destination Port Group ID for the flooding of
broadcast packets, to allow configuring it individually.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
Changes in v5:
Restore the PGID_BC value from the ocelot-8021q DSA tagger setup code too.

Changes in v4:
None.

Changes in v3:
None.

Changes in v2:
None.

 drivers/net/dsa/ocelot/felix.c     |  2 ++
 drivers/net/ethernet/mscc/ocelot.c | 13 ++++++++-----
 include/soc/mscc/ocelot.h          | 15 ++++++++-------
 3 files changed, 18 insertions(+), 12 deletions(-)

diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index ae11d3f030ac..00b053d8294f 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -299,6 +299,7 @@ static int felix_setup_tag_8021q(struct dsa_switch *ds, int cpu)
 	cpu_flood = ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports));
 	ocelot_rmw_rix(ocelot, 0, cpu_flood, ANA_PGID_PGID, PGID_UC);
 	ocelot_rmw_rix(ocelot, 0, cpu_flood, ANA_PGID_PGID, PGID_MC);
+	ocelot_rmw_rix(ocelot, 0, cpu_flood, ANA_PGID_PGID, PGID_BC);
 
 	felix->dsa_8021q_ctx = kzalloc(sizeof(*felix->dsa_8021q_ctx),
 				       GFP_KERNEL);
@@ -412,6 +413,7 @@ static int felix_setup_tag_npi(struct dsa_switch *ds, int cpu)
 	cpu_flood = ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports));
 	ocelot_rmw_rix(ocelot, cpu_flood, cpu_flood, ANA_PGID_PGID, PGID_UC);
 	ocelot_rmw_rix(ocelot, cpu_flood, cpu_flood, ANA_PGID_PGID, PGID_MC);
+	ocelot_rmw_rix(ocelot, cpu_flood, cpu_flood, ANA_PGID_PGID, PGID_BC);
 
 	return 0;
 }
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 1654a6e22a7d..1a31598e2ae6 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -1716,7 +1716,7 @@ int ocelot_init(struct ocelot *ocelot)
 	/* Setup flooding PGIDs */
 	for (i = 0; i < ocelot->num_flooding_pgids; i++)
 		ocelot_write_rix(ocelot, ANA_FLOODING_FLD_MULTICAST(PGID_MC) |
-				 ANA_FLOODING_FLD_BROADCAST(PGID_MC) |
+				 ANA_FLOODING_FLD_BROADCAST(PGID_BC) |
 				 ANA_FLOODING_FLD_UNICAST(PGID_UC),
 				 ANA_FLOODING, i);
 	ocelot_write(ocelot, ANA_FLOODING_IPMC_FLD_MC6_DATA(PGID_MCIPV6) |
@@ -1737,15 +1737,18 @@ int ocelot_init(struct ocelot *ocelot)
 		ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, PGID_SRC + port);
 	}
 
-	/* Allow broadcast MAC frames. */
 	for_each_nonreserved_multicast_dest_pgid(ocelot, i) {
 		u32 val = ANA_PGID_PGID_PGID(GENMASK(ocelot->num_phys_ports - 1, 0));
 
 		ocelot_write_rix(ocelot, val, ANA_PGID_PGID, i);
 	}
-	ocelot_write_rix(ocelot,
-			 ANA_PGID_PGID_PGID(GENMASK(ocelot->num_phys_ports, 0)),
-			 ANA_PGID_PGID, PGID_MC);
+	/* Allow broadcast and unknown L2 multicast to the CPU. */
+	ocelot_rmw_rix(ocelot, ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports)),
+		       ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports)),
+		       ANA_PGID_PGID, PGID_MC);
+	ocelot_rmw_rix(ocelot, ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports)),
+		       ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports)),
+		       ANA_PGID_PGID, PGID_BC);
 	ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, PGID_MCIPV4);
 	ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, PGID_MCIPV6);
 
diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
index bfce3df61bfd..9acbef1416f1 100644
--- a/include/soc/mscc/ocelot.h
+++ b/include/soc/mscc/ocelot.h
@@ -54,16 +54,17 @@
  * PGID_CPU: used for whitelisting certain MAC addresses, such as the addresses
  *           of the switch port net devices, towards the CPU port module.
  * PGID_UC: the flooding destinations for unknown unicast traffic.
- * PGID_MC: the flooding destinations for broadcast and non-IP multicast
- *          traffic.
+ * PGID_MC: the flooding destinations for non-IP multicast traffic.
  * PGID_MCIPV4: the flooding destinations for IPv4 multicast traffic.
  * PGID_MCIPV6: the flooding destinations for IPv6 multicast traffic.
+ * PGID_BC: the flooding destinations for broadcast traffic.
  */
-#define PGID_CPU			59
-#define PGID_UC				60
-#define PGID_MC				61
-#define PGID_MCIPV4			62
-#define PGID_MCIPV6			63
+#define PGID_CPU			58
+#define PGID_UC				59
+#define PGID_MC				60
+#define PGID_MCIPV4			61
+#define PGID_MCIPV6			62
+#define PGID_BC				63
 
 #define for_each_unicast_dest_pgid(ocelot, pgid)		\
 	for ((pgid) = 0;					\
-- 
2.25.1


  parent reply	other threads:[~2021-02-12 15:18 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-12 15:15 [PATCH v5 net-next 00/10] Cleanup in brport flags switchdev offload for DSA Vladimir Oltean
2021-02-12 15:15 ` [PATCH v5 net-next 01/10] net: switchdev: propagate extack to port attributes Vladimir Oltean
2021-02-12 16:00   ` Nikolay Aleksandrov
2021-02-12 17:03   ` Grygorii Strashko
2021-02-12 15:15 ` [PATCH v5 net-next 02/10] net: bridge: offload all port flags at once in br_setport Vladimir Oltean
2021-02-12 15:57   ` Nikolay Aleksandrov
2021-02-12 18:05   ` Florian Fainelli
2021-02-12 15:15 ` [PATCH v5 net-next 03/10] net: bridge: don't print in br_switchdev_set_port_flag Vladimir Oltean
2021-02-12 15:59   ` Nikolay Aleksandrov
2021-02-12 18:07   ` Florian Fainelli
2021-02-12 15:15 ` [PATCH v5 net-next 04/10] net: dsa: configure better brport flags when ports leave the bridge Vladimir Oltean
2021-02-12 15:15 ` [PATCH v5 net-next 05/10] net: switchdev: pass flags and mask to both {PRE_,}BRIDGE_FLAGS attributes Vladimir Oltean
2021-02-12 17:06   ` Grygorii Strashko
2021-02-12 18:10   ` Florian Fainelli
2021-02-12 15:15 ` [PATCH v5 net-next 06/10] net: dsa: act as passthrough for bridge port flags Vladimir Oltean
2021-02-12 18:19   ` Florian Fainelli
2021-02-12 15:15 ` [PATCH v5 net-next 07/10] net: dsa: felix: restore multicast flood to CPU when NPI tagger reinitializes Vladimir Oltean
2021-02-12 18:12   ` Florian Fainelli
2021-02-12 15:15 ` Vladimir Oltean [this message]
2021-02-12 15:15 ` [PATCH v5 net-next 09/10] net: mscc: ocelot: offload bridge port flags to device Vladimir Oltean
2021-02-12 15:16 ` [PATCH v5 net-next 10/10] net: dsa: sja1105: " Vladimir Oltean
2021-02-13  1:20 ` [PATCH v5 net-next 00/10] Cleanup in brport flags switchdev offload for DSA patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210212151600.3357121-9-olteanv@gmail.com \
    --to=olteanv@gmail.com \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=andrew@lunn.ch \
    --cc=bridge@lists.linux-foundation.org \
    --cc=claudiu.manoil@nxp.com \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=grygorii.strashko@ti.com \
    --cc=idosch@idosch.org \
    --cc=ioana.ciornei@nxp.com \
    --cc=ivecera@redhat.com \
    --cc=jiri@resnulli.us \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nikolay@nvidia.com \
    --cc=roopa@nvidia.com \
    --cc=tchornyi@marvell.com \
    --cc=vigneshr@ti.com \
    --cc=vivien.didelot@gmail.com \
    --cc=vkochan@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).