Linux-OMAP Archive on lore.kernel.org
 help / color / Atom feed
From: Suman Anna <s-anna@ti.com>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
	Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>,
	Jan Kiszka <jan.kiszka@siemens.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Lokesh Vutla <lokeshvutla@ti.com>,
	<linux-remoteproc@vger.kernel.org>, <linux-omap@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH 1/3] remoteproc: pru: Fixup interrupt-parent logic for fw events
Date: Tue, 23 Mar 2021 17:38:37 -0500
Message-ID: <20210323223839.17464-2-s-anna@ti.com> (raw)
In-Reply-To: <20210323223839.17464-1-s-anna@ti.com>

The PRU firmware interrupt mapping logic in pru_handle_intrmap() uses
of_irq_find_parent() with PRU device node to get a handle to the PRUSS
Interrupt Controller at present. This logic however requires that the
PRU nodes always define a interrupt-parent property. This property is
neither a required/defined property as per the PRU remoteproc binding,
nor is relevant from a DT node point of view without any associated
interrupts. The curret logic finds a wrong interrupt controller and
fails to perform proper mapping without any interrupt-parent property
in the PRU nodes.

Fix this logic to always find and use the sibling interrupt controller.
Also, while at this, fix the acquired interrupt controller device node
reference properly.

Fixes: c75c9fdac66e ("remoteproc: pru: Add support for PRU specific interrupt configuration")
Signed-off-by: Suman Anna <s-anna@ti.com>
---
 drivers/remoteproc/pru_rproc.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
index 16979c1cd2f4..a9d07c0751be 100644
--- a/drivers/remoteproc/pru_rproc.c
+++ b/drivers/remoteproc/pru_rproc.c
@@ -284,7 +284,7 @@ static int pru_handle_intrmap(struct rproc *rproc)
 	struct pru_rproc *pru = rproc->priv;
 	struct pru_irq_rsc *rsc = pru->pru_interrupt_map;
 	struct irq_fwspec fwspec;
-	struct device_node *irq_parent;
+	struct device_node *parent, *irq_parent;
 	int i, ret = 0;
 
 	/* not having pru_interrupt_map is not an error */
@@ -312,9 +312,16 @@ static int pru_handle_intrmap(struct rproc *rproc)
 
 	/*
 	 * parse and fill in system event to interrupt channel and
-	 * channel-to-host mapping
+	 * channel-to-host mapping. The interrupt controller to be used
+	 * for these mappings for a given PRU remoteproc is always its
+	 * corresponding sibling PRUSS INTC node.
 	 */
-	irq_parent = of_irq_find_parent(pru->dev->of_node);
+	parent = of_get_parent(dev_of_node(pru->dev));
+	if (!parent)
+		return -ENODEV;
+
+	irq_parent = of_get_child_by_name(parent, "interrupt-controller");
+	of_node_put(parent);
 	if (!irq_parent) {
 		kfree(pru->mapped_irq);
 		return -ENODEV;
@@ -337,11 +344,13 @@ static int pru_handle_intrmap(struct rproc *rproc)
 			goto map_fail;
 		}
 	}
+	of_node_put(irq_parent);
 
 	return ret;
 
 map_fail:
 	pru_dispose_irq_mapping(pru);
+	of_node_put(irq_parent);
 
 	return ret;
 }
-- 
2.30.1


  reply index

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-23 22:38 [PATCH 0/3] PRU firmware event/interrupt mapping fixes Suman Anna
2021-03-23 22:38 ` Suman Anna [this message]
2021-04-06 23:28   ` [PATCH 1/3] remoteproc: pru: Fixup interrupt-parent logic for fw events Mathieu Poirier
2021-04-07 14:32     ` Suman Anna
2021-03-23 22:38 ` [PATCH 2/3] remoteproc: pru: Fix wrong success return value " Suman Anna
2021-04-06 23:33   ` Mathieu Poirier
2021-03-23 22:38 ` [PATCH 3/3] remoteproc: pru: Fix and cleanup firmware interrupt mapping logic Suman Anna
2021-04-06 23:47   ` Mathieu Poirier
2021-04-07 14:34     ` Suman Anna

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210323223839.17464-2-s-anna@ti.com \
    --to=s-anna@ti.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=grzegorz.jaszczyk@linaro.org \
    --cc=jan.kiszka@siemens.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=mathieu.poirier@linaro.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-OMAP Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-omap/0 linux-omap/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-omap linux-omap/ https://lore.kernel.org/linux-omap \
		linux-omap@vger.kernel.org
	public-inbox-index linux-omap

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-omap


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git