Linux-OMAP Archive on
 help / color / Atom feed
From: Dario Binacchi <>
Cc: "Dario Binacchi" <>,
	"Tero Kristo" <>,
	"Grygorii Strashko" <>,
	"Benoît Cousson" <>,
	"Lee Jones" <>,
	"Michael Turquette" <>,
	"Rob Herring" <>,
	"Stephen Boyd" <>,
	"Tony Lindgren" <>,,,
Subject: [PATCH v5 0/5] clk: ti: add am33xx spread spectrum clock support
Date: Sun, 18 Apr 2021 16:56:50 +0200
Message-ID: <> (raw)

As reported by the TI spruh73x/spruhl7x RM, MPU and LCD modules support
spread spectrum clocking (SSC) on their output clocks. SSC is used to
spread the spectral peaking of the clock to reduce any electromagnetic
interference (EMI) that may be caused due to the clock’s fundamental
or any of its harmonics.
The series allows you to enable and adjust the spread spectrum clocking
for all am33xx/am43xx PLLs for which it is supported. All these issues
have been fixed.

Previous versions of the series did not supported SSC for am43xx SOCs,
causing clock registration failure for DPLLs. Furthermore, for am33xx
SOCs, clock registration failed for DPLLs for which SSC is not supported.

Changes in v5:
- Remove ssc_ack_mask field from dpll_data structure. It was not used.
- Change ssc_downspread type from u8 to bool in dpll_data structure.

Changes in v4:
- Add Stephen Boyd review tag.
- Add Rob Herring review tag.
- Add SSC registers for CORE, DDR and PER PLLs.
- Update commit message.
- Update commit message.

Changes in v3:
- Add '-hz' suffix to "ti,ssc-modfreq" binding.
- Add Tony Lindgren acked tag.
- Use "ti,ssc-modfreq-hz" binding instead of "ti,ssc-modfreq".

Changes in v2:
- Remove SSC registers from dpll_core_ck@490 node (SSC is not supported)
- Add SSC registers to dpll_mpu_ck@488 node.
- Move the DT changes to the previous patch in the series.

Dario Binacchi (5):
  clk: ti: fix typo in routine description
  dt-bindings: ti: dpll: add spread spectrum support
  ARM: dts: am33xx-clocks: add spread spectrum support
  ARM: dts: am43xx-clocks: add spread spectrum support
  clk: ti: add am33xx/am43xx spread spectrum clock support

 .../devicetree/bindings/clock/ti/dpll.txt     | 20 +++++
 arch/arm/boot/dts/am33xx-clocks.dtsi          | 10 +--
 arch/arm/boot/dts/am43xx-clocks.dtsi          | 12 +--
 drivers/clk/ti/dpll.c                         | 39 +++++++++
 drivers/clk/ti/dpll3xxx.c                     | 87 ++++++++++++++++++-
 include/linux/clk/ti.h                        | 22 +++++
 6 files changed, 178 insertions(+), 12 deletions(-)


             reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-18 14:56 Dario Binacchi [this message]
2021-04-18 14:56 ` [PATCH v5 1/5] clk: ti: fix typo in routine description Dario Binacchi
2021-04-18 14:56 ` [PATCH v5 3/5] ARM: dts: am33xx-clocks: add spread spectrum support Dario Binacchi
2021-04-18 14:56 ` [PATCH v5 4/5] ARM: dts: am43xx-clocks: " Dario Binacchi
2021-04-18 14:56 ` [PATCH v5 5/5] clk: ti: add am33xx/am43xx spread spectrum clock support Dario Binacchi
2021-04-19 11:26   ` Tero Kristo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-OMAP Archive on

Archives are clonable:
	git clone --mirror linux-omap/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-omap linux-omap/ \
	public-inbox-index linux-omap

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone