[PATCH v4 0/8] document dt-schema and fix node names for some USB Ethernet controllers

[PATCH v4 0/8] document dt-schema and fix node names for some USB Ethernet controllers

[Oleksij Rempel]

changes v4:
- reword commit logs.
- add note about compatible fix

Oleksij Rempel (8):
  dt-bindings: net: add schema for ASIX USB Ethernet controllers
  dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet
    controllers
  dt-bindings: usb: ci-hdrc-usb2: fix node node for ethernet controller
  ARM: dts: bcm283x: fix ethernet node name
  ARM: dts: exynos: fix ethernet node name for different odroid boards
  ARM: dts: omap3/4/5: fix ethernet node name for different OMAP boards
  ARM: dts: tegra20/30: fix ethernet node name for different tegra
    boards
  arm64: dts: imx8mm-kontron: fix ethernet node name

 .../devicetree/bindings/net/asix,ax88178.yaml | 68 ++++++++++++++++
 .../bindings/net/microchip,lan95xx.yaml       | 80 +++++++++++++++++++
 .../devicetree/bindings/usb/ci-hdrc-usb2.txt  |  2 +-
 arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi   |  2 +-
 arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi   |  2 +-
 arch/arm/boot/dts/exynos4412-odroidu3.dts     |  4 +-
 arch/arm/boot/dts/exynos4412-odroidx.dts      |  8 +-
 arch/arm/boot/dts/exynos5410-odroidxu.dts     |  4 +-
 .../boot/dts/exynos5422-odroidxu3-lite.dts    |  6 +-
 arch/arm/boot/dts/exynos5422-odroidxu3.dts    |  6 +-
 arch/arm/boot/dts/omap3-beagle-xm.dts         |  2 +-
 arch/arm/boot/dts/omap4-panda-common.dtsi     |  2 +-
 arch/arm/boot/dts/omap5-igep0050.dts          |  2 +-
 arch/arm/boot/dts/omap5-uevm.dts              |  2 +-
 arch/arm/boot/dts/tegra20-colibri.dtsi        |  2 +-
 arch/arm/boot/dts/tegra30-colibri.dtsi        |  2 +-
 arch/arm/boot/dts/tegra30-ouya.dts            |  2 +-
 .../dts/freescale/imx8mm-kontron-n801x-s.dts  |  2 +-
 18 files changed, 173 insertions(+), 25 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/asix,ax88178.yaml
 create mode 100644 Documentation/devicetree/bindings/net/microchip,lan95xx.yaml

-- 
2.30.2

[PATCH v4 1/8] dt-bindings: net: add schema for ASIX USB Ethernet controllers

[Oleksij Rempel]

Create schema for ASIX USB Ethernet controllers and import some of
currently supported USB IDs form drivers/net/usb/asix_devices.c

This devices are already used in some of DTs. So, this schema makes it official.
NOTE: there was no previously documented txt based DT binding for this
controllers.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 .../devicetree/bindings/net/asix,ax88178.yaml | 68 +++++++++++++++++++
 1 file changed, 68 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/asix,ax88178.yaml

diff --git a/Documentation/devicetree/bindings/net/asix,ax88178.yaml b/Documentation/devicetree/bindings/net/asix,ax88178.yaml
new file mode 100644
index 000000000000..1af52358de4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/asix,ax88178.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/asix,ax88178.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The device tree bindings for the USB Ethernet controllers
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+  Device tree properties for hard wired USB Ethernet devices.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - usbb95,1720   # ASIX AX88172
+          - usbb95,172a   # ASIX AX88172A
+          - usbb95,1780   # ASIX AX88178
+          - usbb95,7720   # ASIX AX88772
+          - usbb95,772a   # ASIX AX88772A
+          - usbb95,772b   # ASIX AX88772B
+          - usbb95,7e2b   # ASIX AX88772B
+
+  reg: true
+  local-mac-address: true
+  mac-address: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@1 {
+            compatible = "usbb95,7e2b";
+            reg = <1>;
+            local-mac-address = [00 00 00 00 00 00];
+        };
+    };
+  - |
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        usb1@1 {
+            compatible = "usb1234,5678";
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet@1 {
+               compatible = "usbb95,772b";
+               reg = <1>;
+            };
+        };
+    };
-- 
2.30.2

[PATCH v4 2/8] dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet controllers

[Oleksij Rempel]

Create initial schema for Microchip/SMSC LAN95xx USB Ethernet controllers and
import some of currently supported USB IDs form drivers/net/usb/smsc95xx.c

This devices are already used in some of DTs. So, this schema makes it official.
NOTE: there was no previously documented txt based DT binding for this
controllers.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 .../bindings/net/microchip,lan95xx.yaml       | 80 +++++++++++++++++++
 1 file changed, 80 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/microchip,lan95xx.yaml

diff --git a/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml
new file mode 100644
index 000000000000..8521c65366b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/microchip,lan95xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The device tree bindings for the USB Ethernet controllers
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+  Device tree properties for hard wired SMSC95xx compatible USB Ethernet
+  controller.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - usb424,9500   # SMSC9500 USB Ethernet Device
+          - usb424,9505   # SMSC9505 USB Ethernet Device
+          - usb424,9530   # SMSC LAN9530 USB Ethernet Device
+          - usb424,9730   # SMSC LAN9730 USB Ethernet Device
+          - usb424,9900   # SMSC9500 USB Ethernet Device (SAL10)
+          - usb424,9901   # SMSC9505 USB Ethernet Device (SAL10)
+          - usb424,9902   # SMSC9500A USB Ethernet Device (SAL10)
+          - usb424,9903   # SMSC9505A USB Ethernet Device (SAL10)
+          - usb424,9904   # SMSC9512/9514 USB Hub & Ethernet Device (SAL10)
+          - usb424,9905   # SMSC9500A USB Ethernet Device (HAL)
+          - usb424,9906   # SMSC9505A USB Ethernet Device (HAL)
+          - usb424,9907   # SMSC9500 USB Ethernet Device (Alternate ID)
+          - usb424,9908   # SMSC9500A USB Ethernet Device (Alternate ID)
+          - usb424,9909   # SMSC9512/9514 USB Hub & Ethernet Devic.  ID)
+          - usb424,9e00   # SMSC9500A USB Ethernet Device
+          - usb424,9e01   # SMSC9505A USB Ethernet Device
+          - usb424,9e08   # SMSC LAN89530 USB Ethernet Device
+          - usb424,ec00   # SMSC9512/9514 USB Hub & Ethernet Device
+
+  reg: true
+  local-mac-address: true
+  mac-address: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@1 {
+            compatible = "usb424,ec00";
+            reg = <1>;
+            local-mac-address = [00 00 00 00 00 00];
+        };
+    };
+  - |
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        usb1@1 {
+            compatible = "usb424,9514";
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet@1 {
+               compatible = "usb424,ec00";
+               reg = <1>;
+            };
+        };
+    };
-- 
2.30.2

[PATCH v4 3/8] dt-bindings: usb: ci-hdrc-usb2: fix node node for ethernet controller

[Oleksij Rempel]

This documentation provides wrong node name for the Ethernet controller.
It should be "ethernet" instead of "smsc" as required by Ethernet
controller devicetree schema:
 Documentation/devicetree/bindings/net/ethernet-controller.yaml

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index a5c5db6a0b2d..ba51fb1252b9 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -151,7 +151,7 @@ Example for HSIC:
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		usbnet: smsc@1 {
+		usbnet: ethernet@1 {
 			compatible = "usb424,9730";
 			reg = <1>;
 		};
-- 
2.30.2

[PATCH v4 4/8] ARM: dts: bcm283x: fix ethernet node name

[Oleksij Rempel]

It should be "ethernet@x" instead of "usbether@x" as required by Ethernet
controller devicetree schema:
 Documentation/devicetree/bindings/net/ethernet-controller.yaml

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi | 2 +-
 arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
index 967e081cb9c2..882b13807075 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
+++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
@@ -12,7 +12,7 @@ usb1@1 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
+		ethernet: ethernet@1 {
 			compatible = "usb424,ec00";
 			reg = <1>;
 		};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
index dc7ae776db5f..4273b90b53cc 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
+++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
@@ -11,7 +11,7 @@ usb1@1 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
+		ethernet: ethernet@1 {
 			compatible = "usb424,ec00";
 			reg = <1>;
 		};
-- 
2.30.2

[PATCH v4 5/8] ARM: dts: exynos: fix ethernet node name for different odroid boards

[Oleksij Rempel]

The node name of Ethernet controller should be "ethernet" instead of
"usbether" as required by Ethernet controller devicetree schema:
 Documentation/devicetree/bindings/net/ethernet-controller.yaml

Also fix compatible for this device as required by USB device schema:
 Documentation/devicetree/bindings/usb/usb-device.yaml
  The textual representation of VID and PID shall be in lower case hexadecimal
  with leading zeroes suppressed.

Without compatible fix, we won't be able to validate this device nodes.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/exynos4412-odroidu3.dts       | 4 ++--
 arch/arm/boot/dts/exynos4412-odroidx.dts        | 8 ++++----
 arch/arm/boot/dts/exynos5410-odroidxu.dts       | 4 ++--
 arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 6 +++---
 arch/arm/boot/dts/exynos5422-odroidxu3.dts      | 6 +++---
 5 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index efaf7533e84f..36c369c42b77 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -119,8 +119,8 @@ &ehci {
 	phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
 	phy-names = "hsic0", "hsic1";
 
-	ethernet: usbether@2 {
-		compatible = "usb0424,9730";
+	ethernet: ethernet@2 {
+		compatible = "usb424,9730";
 		reg = <2>;
 		local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
 	};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 440135d0ff2a..ba46baf9117f 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -70,19 +70,19 @@ &ehci {
 	phy-names = "hsic0";
 
 	hub@2 {
-		compatible = "usb0424,3503";
+		compatible = "usb424,3503";
 		reg = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		hub@1 {
-			compatible = "usb0424,9514";
+			compatible = "usb424,9514";
 			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			ethernet: usbether@1 {
-				compatible = "usb0424,ec00";
+			ethernet: ethernet@1 {
+				compatible = "usb424,ec00";
 				reg = <1>;
 				/* Filled in by a bootloader */
 				local-mac-address = [00 00 00 00 00 00];
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index 884fef55836c..4c7039e771db 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -675,8 +675,8 @@ &usbhost2 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	ethernet: usbether@2 {
-		compatible = "usb0424,9730";
+	ethernet: ethernet@2 {
+		compatible = "usb424,9730";
 		reg = <2>;
 		local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
 	};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
index 62c5928aa994..e3154a1cae23 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -113,13 +113,13 @@ &usbhost2 {
 	#size-cells = <0>;
 
 	hub@1 {
-		compatible = "usb0424,9514";
+		compatible = "usb424,9514";
 		reg = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
-			compatible = "usb0424,ec00";
+		ethernet: ethernet@1 {
+			compatible = "usb424,ec00";
 			reg = <1>;
 			local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
 		};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index cecaeb69e623..a378d4937ff7 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -80,13 +80,13 @@ &usbhost2 {
 	#size-cells = <0>;
 
 	hub@1 {
-		compatible = "usb0424,9514";
+		compatible = "usb424,9514";
 		reg = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
-			compatible = "usb0424,ec00";
+		ethernet: ethernet@1 {
+			compatible = "usb424,ec00";
 			reg = <1>;
 			local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
 		};
-- 
2.30.2

[PATCH v4 6/8] ARM: dts: omap3/4/5: fix ethernet node name for different OMAP boards

[Oleksij Rempel]

The node name of Ethernet controller should be "ethernet" instead of
"usbether" as required by Ethernet controller devicetree schema:
 Documentation/devicetree/bindings/net/ethernet-controller.yaml

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/omap3-beagle-xm.dts     | 2 +-
 arch/arm/boot/dts/omap4-panda-common.dtsi | 2 +-
 arch/arm/boot/dts/omap5-igep0050.dts      | 2 +-
 arch/arm/boot/dts/omap5-uevm.dts          | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index a858ebfa1500..35eced6521ef 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -370,7 +370,7 @@ hub@2 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
+		ethernet: ethernet@1 {
 			compatible = "usb424,ec00";
 			reg = <1>;
 		};
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 609a8dea946b..518652a599bd 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -558,7 +558,7 @@ hub@1 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
+		ethernet: ethernet@1 {
 			compatible = "usb424,ec00";
 			reg = <1>;
 		};
diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts
index 76e499d89d24..3851120857d7 100644
--- a/arch/arm/boot/dts/omap5-igep0050.dts
+++ b/arch/arm/boot/dts/omap5-igep0050.dts
@@ -128,7 +128,7 @@ hub@2 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@3 {
+		ethernet: ethernet@3 {
 			compatible = "usb424,7500";
 			reg = <3>;
 		};
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 51d5fcae5081..453da9f18a99 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -209,7 +209,7 @@ hub@2 {
 		#size-cells = <0>;
 	};
 
-	ethernet: usbether@3 {
+	ethernet: ethernet@3 {
 		compatible = "usb424,9730";
 		reg = <3>;
 	};
-- 
2.30.2

[PATCH v4 7/8] ARM: dts: tegra20/30: fix ethernet node name for different tegra boards

[Oleksij Rempel]

The node name of Ethernet controller should be "ethernet" instead of
"asix" or "smsc" as required by Ethernet controller devicetree schema:
 Documentation/devicetree/bindings/net/ethernet-controller.yaml

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/tegra20-colibri.dtsi | 2 +-
 arch/arm/boot/dts/tegra30-colibri.dtsi | 2 +-
 arch/arm/boot/dts/tegra30-ouya.dts     | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/tegra20-colibri.dtsi b/arch/arm/boot/dts/tegra20-colibri.dtsi
index 1eefb9ee4ac8..8ebd8afc857d 100644
--- a/arch/arm/boot/dts/tegra20-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri.dtsi
@@ -691,7 +691,7 @@ usb@c5004000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		asix@1 {
+		ethernet@1 {
 			compatible = "usbb95,772b";
 			reg = <1>;
 			local-mac-address = [00 00 00 00 00 00];
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index be691a1c33a1..22231d450b1b 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -960,7 +960,7 @@ usb@7d004000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		asix@1 {
+		ethernet@1 {
 			compatible = "usbb95,772b";
 			reg = <1>;
 			local-mac-address = [00 00 00 00 00 00];
diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts
index a5cfbab5f565..e58dda4f9d2c 100644
--- a/arch/arm/boot/dts/tegra30-ouya.dts
+++ b/arch/arm/boot/dts/tegra30-ouya.dts
@@ -4553,7 +4553,7 @@ usb@7d004000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		smsc@2 { /* SMSC 10/100T Ethernet Controller */
+		ethernet@2 { /* SMSC 10/100T Ethernet Controller */
 			compatible = "usb424,9e00";
 			reg = <2>;
 			local-mac-address = [00 11 22 33 44 55];
-- 
2.30.2

[PATCH v4 8/8] arm64: dts: imx8mm-kontron: fix ethernet node name

[Oleksij Rempel]

The node name of Ethernet controller should be "ethernet" instead of
"usbether" as required by Ethernet controller devicetree schema:
 Documentation/devicetree/bindings/net/ethernet-controller.yaml

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
index d40caf14ac4a..23be1ec538ba 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
@@ -182,7 +182,7 @@ usb1@1 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		usbnet: usbether@1 {
+		usbnet: ethernet@1 {
 			compatible = "usb424,ec00";
 			reg = <1>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-- 
2.30.2

Re: [PATCH v4 1/8] dt-bindings: net: add schema for ASIX USB Ethernet controllers

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 558 bytes --]

On 15.02.2022 11:00:11, Oleksij Rempel wrote:
> Create schema for ASIX USB Ethernet controllers and import some of
> currently supported USB IDs form drivers/net/usb/asix_devices.c
> 
> This devices are already used in some of DTs. So, this schema makes it official.
These

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]