From: Kevin Hilman <khilman@baylibre.com>
To: "Péter Ujfalusi" <peter.ujfalusi@gmail.com>, dmaengine@vger.kernel.org
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Nicolas Frayer <nfrayer@baylibre.com>
Subject: Re: [PATCH 2/3] dma/ti: convert k3-udma to module
Date: Mon, 26 Sep 2022 14:17:40 -0700 [thread overview]
Message-ID: <7hczbhg7ij.fsf@baylibre.com> (raw)
In-Reply-To: <11cf284c-d0d6-0687-b70b-2245ff8d6fcd@gmail.com>
Péter Ujfalusi <peter.ujfalusi@gmail.com> writes:
> On 9/26/22 21:18, Kevin Hilman wrote:
>> Currently k3-udma driver is built as separate platform drivers with a
>> shared probe and identical code path, just differnet platform data.
>>
>> To enable to build as module, convert the separate platform driver
>> into a single module_platform_driver with the data selection done via
>> compatible string and of_match. The separate of_match tables are also
>> combined into a single table to avoid the multiple calls to
>> of_match_node()
>>
>> Since all modern TI platforms using this are DT enabled, the removal
>> of separate platform_drivers shoul should nave no functional change.
>>
>> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
>> ---
>> drivers/dma/ti/Kconfig | 4 ++--
>> drivers/dma/ti/k3-udma-glue.c | 5 ++++-
>> drivers/dma/ti/k3-udma.c | 40 +++++------------------------------
>> 3 files changed, 11 insertions(+), 38 deletions(-)
>>
>> diff --git a/drivers/dma/ti/Kconfig b/drivers/dma/ti/Kconfig
>> index 79618fac119a..f196be3b222f 100644
>> --- a/drivers/dma/ti/Kconfig
>> +++ b/drivers/dma/ti/Kconfig
>> @@ -35,7 +35,7 @@ config DMA_OMAP
>> DMA engine is found on OMAP and DRA7xx parts.
>>
>> config TI_K3_UDMA
>> - bool "Texas Instruments UDMA support"
>> + tristate "Texas Instruments UDMA support"
>> depends on ARCH_K3
>> depends on TI_SCI_PROTOCOL
>> depends on TI_SCI_INTA_IRQCHIP
>> @@ -48,7 +48,7 @@ config TI_K3_UDMA
>> DMA engine is used in AM65x and j721e.
>>
>> config TI_K3_UDMA_GLUE_LAYER
>> - bool "Texas Instruments UDMA Glue layer for non DMAengine users"
>> + tristate "Texas Instruments UDMA Glue layer for non DMAengine users"
>> depends on ARCH_K3
>> depends on TI_K3_UDMA
>> help
>> diff --git a/drivers/dma/ti/k3-udma-glue.c b/drivers/dma/ti/k3-udma-glue.c
>> index 4fdd9f06b723..c29de4695ae7 100644
>> --- a/drivers/dma/ti/k3-udma-glue.c
>> +++ b/drivers/dma/ti/k3-udma-glue.c
>> @@ -6,6 +6,7 @@
>> *
>> */
>>
>> +#include <linux/module.h>
>> #include <linux/atomic.h>
>> #include <linux/delay.h>
>> #include <linux/dma-mapping.h>
>> @@ -1433,4 +1434,6 @@ static int __init k3_udma_glue_class_init(void)
>> {
>> return class_register(&k3_udma_glue_devclass);
>> }
>> -arch_initcall(k3_udma_glue_class_init);
>> +
>> +module_init(k3_udma_glue_class_init);
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
>> index 2f0d2c68c93c..7239ff31c8c5 100644
>> --- a/drivers/dma/ti/k3-udma.c
>> +++ b/drivers/dma/ti/k3-udma.c
>> @@ -5,6 +5,7 @@
>> */
>>
>> #include <linux/kernel.h>
>> +#include <linux/module.h>
>> #include <linux/delay.h>
>> #include <linux/dmaengine.h>
>> #include <linux/dma-mapping.h>
>> @@ -4318,18 +4319,10 @@ static const struct of_device_id udma_of_match[] = {
>> .compatible = "ti,j721e-navss-mcu-udmap",
>> .data = &j721e_mcu_data,
>> },
>> - { /* Sentinel */ },
>> -};
>> -
>> -static const struct of_device_id bcdma_of_match[] = {
>> {
>> .compatible = "ti,am64-dmss-bcdma",
>> .data = &am64_bcdma_data,
>> },
>> - { /* Sentinel */ },
>> -};
>> -
>> -static const struct of_device_id pktdma_of_match[] = {
>> {
>> .compatible = "ti,am64-dmss-pktdma",
>> .data = &am64_pktdma_data,
>> @@ -5254,14 +5247,9 @@ static int udma_probe(struct platform_device *pdev)
>> return -ENOMEM;
>>
>> match = of_match_node(udma_of_match, dev->of_node);
>> - if (!match)
>> - match = of_match_node(bcdma_of_match, dev->of_node);
>> if (!match) {
>> - match = of_match_node(pktdma_of_match, dev->of_node);
>> - if (!match) {
>> - dev_err(dev, "No compatible match found\n");
>> - return -ENODEV;
>> - }
>> + dev_err(dev, "No compatible match found\n");
>> + return -ENODEV;
>> }
>> ud->match_data = match->data;
>>
>> @@ -5494,27 +5482,9 @@ static struct platform_driver udma_driver = {
>> },
>> .probe = udma_probe,
>> };
>> -builtin_platform_driver(udma_driver);
>>
>> -static struct platform_driver bcdma_driver = {
>> - .driver = {
>> - .name = "ti-bcdma",
>> - .of_match_table = bcdma_of_match,
>> - .suppress_bind_attrs = true,
>> - },
>> - .probe = udma_probe,
>> -};
>> -builtin_platform_driver(bcdma_driver);
>> -
>> -static struct platform_driver pktdma_driver = {
>> - .driver = {
>> - .name = "ti-pktdma",
>> - .of_match_table = pktdma_of_match,
>> - .suppress_bind_attrs = true,
>> - },
>> - .probe = udma_probe,
>> -};
>> -builtin_platform_driver(pktdma_driver);
>> +module_platform_driver(udma_driver);
> I did liked the 'hack' that the dev_* prints contained the actual type
> of the DMA (udma/bcdma/pktdma), but it is not working via modules,
> unless the driver init parts are split out and the bulk is kept as a
> library.
>
> I had this half way implemented in my wip, but never got the chance to
> finalize it.
I guess that could always be done as a second path if needed, but I
wanted to keep this module conversion as simple as possible at first.
> But, one can get the info via the address, so...
Shall I take this "so..." as an acked-by? ;)
Kevin
next prev parent reply other threads:[~2022-09-26 21:17 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-26 18:18 [PATCH 0/3] dma/ti: enable udma and psil to be built as modules Kevin Hilman
2022-09-26 18:18 ` [PATCH 1/3] of/irq: export of_msi_get_domain Kevin Hilman
2022-09-26 18:18 ` [PATCH 2/3] dma/ti: convert k3-udma to module Kevin Hilman
2022-09-26 18:52 ` Péter Ujfalusi
2022-09-26 21:17 ` Kevin Hilman [this message]
2022-09-27 17:07 ` Péter Ujfalusi
2022-09-26 18:18 ` [PATCH 3/3] dma/ti: convert PSIL to be buildable as module Kevin Hilman
2022-09-26 18:47 ` Péter Ujfalusi
2022-09-26 18:50 ` Kevin Hilman
2022-09-27 17:19 ` Péter Ujfalusi
2022-09-27 22:56 ` Kevin Hilman
2022-09-26 19:02 ` [PATCH 0/3] dma/ti: enable udma and psil to be built as modules Péter Ujfalusi
2022-09-26 21:21 ` Kevin Hilman
2022-09-27 17:21 ` Péter Ujfalusi
2022-09-27 23:10 ` Kevin Hilman
2022-09-28 13:54 ` Péter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7hczbhg7ij.fsf@baylibre.com \
--to=khilman@baylibre.com \
--cc=dmaengine@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=nfrayer@baylibre.com \
--cc=peter.ujfalusi@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).