Re: [PATCHv3 5/6] irqchip/irq-pruss-intc: Add support for ICSSG INTC on K3 SoCs

[Marc Zyngier <maz@kernel.org>]

On 2020-07-02 15:17, Grzegorz Jaszczyk wrote:
> From: Suman Anna <s-anna@ti.com>
> 
> The K3 AM65x and J721E SoCs have the next generation of the PRU-ICSS 
> IP,
> commonly called ICSSG. The PRUSS INTC present within the ICSSG supports
> more System Events (160 vs 64), more Interrupt Channels and Host 
> Interrupts
> (20 vs 10) compared to the previous generation PRUSS INTC instances. 
> The
> first 2 and the last 10 of these host interrupt lines are used by the
> PRU and other auxiliary cores and sub-modules within the ICSSG, with 8
> host interrupts connected to MPU. The host interrupts 5, 6, 7 are also
> connected to the other ICSSG instances within the SoC and can be
> partitioned as per system integration through the board dts files.
> 
> Enhance the PRUSS INTC driver to add support for this ICSSG INTC
> instance. This support is added using specific compatible and match
> data and updating the code to use this data instead of the current
> hard-coded macros. The INTC config structure is updated to use the
> higher events and channels on all SoCs, while limiting the actual
> processing to only the relevant number of events/channels/interrupts.
> 
> Signed-off-by: Suman Anna <s-anna@ti.com>
> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
> ---
> v2->v3:
> - Change patch order: use it directly after "irqchip/irq-pruss-intc:
>   Implement irq_{get,set}_irqchip_state ops" and before new
>   "irqchip/irq-pruss-intc: Add event mapping support" in order to 
> reduce
>   diff.

The diff would be even smaller if you introduced a variable number of
inputs the first place, i.e. in patch #2. Most if this patch just
retrofits it. Please squash these changes into that initial patch,
and only add the platform stuff here.

Thanks,

         M.
-- 
Jazz is not dead. It just smells funny...