[GIT PULL 1/4] soc changes for omaps for v5.7

[GIT PULL 1/4] soc changes for omaps for v5.7

[Tony Lindgren]

From: "Tony Lindgren" <tony@atomide.com>

The following changes since commit bb6d3fb354c5ee8d6bde2d576eb7220ea09862b9:

  Linux 5.6-rc1 (2020-02-09 16:08:48 -0800)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v5.7/soc-signed

for you to fetch changes up to 0d53cc8b3319fc6d0d9656c428d03a3c1628c19f:

  Merge branch 'omap-for-v5.7/omap1' into omap-for-v5.7/soc (2020-03-06 07:17:10 -0800)

----------------------------------------------------------------
SoC changes for omaps for v5.7 merge window

A change to improve the warning output for device tree data
mismatch as compared to legacy platform data for ti-sysc
related interconnect target modules.

And change omap1 to request_irq() instead of setup_irq().

----------------------------------------------------------------
Tony Lindgren (2):
      ARM: OMAP2+: Improve handling of ti-sysc related sysc_fields
      Merge branch 'omap-for-v5.7/omap1' into omap-for-v5.7/soc

afzal mohammed (1):
      ARM: OMAP: replace setup_irq() by request_irq()

 arch/arm/mach-omap1/pm.c         | 13 ++++++-------
 arch/arm/mach-omap1/time.c       | 10 +++-------
 arch/arm/mach-omap1/timer32k.c   | 10 +++-------
 arch/arm/mach-omap2/omap_hwmod.c | 19 ++++++++++++-------
 arch/arm/mach-omap2/timer.c      | 11 +++--------
 5 files changed, 27 insertions(+), 36 deletions(-)

[GIT PULL 2/4] am3 and am4 pm changes for v5.7

[Tony Lindgren]

From: "Tony Lindgren" <tony@atomide.com>

The following changes since commit bb6d3fb354c5ee8d6bde2d576eb7220ea09862b9:

  Linux 5.6-rc1 (2020-02-09 16:08:48 -0800)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v5.7/pm33xx-signed

for you to fetch changes up to 73321b5f4dafc0a0e7389174ba7eaf558291a188:

  ARM: omap2plus_defconfig: Add CONFIG_ARM_CPUIDLE (2020-02-27 09:27:30 -0800)

----------------------------------------------------------------
PM changes for am335x and am437x for v5.7 merge window

A series of changes from Dave Gerlach to enable basic cpuidle support
for am335x and am437x based on generic cpuidle-arm driver.

----------------------------------------------------------------
Dave Gerlach (5):
      dt-bindings: arm: cpu: Add TI AM335x and AM437x enable method
      ARM: OMAP2+: pm33xx-core: Add cpuidle_ops for am335x/am437x
      ARM: OMAP2+: pm33xx-core: Extend platform_data ops for cpuidle
      soc: ti: pm33xx: Add base cpuidle support
      ARM: omap2plus_defconfig: Add CONFIG_ARM_CPUIDLE

 Documentation/devicetree/bindings/arm/cpus.yaml |   2 +
 arch/arm/configs/omap2plus_defconfig            |   2 +
 arch/arm/mach-omap2/pm33xx-core.c               | 137 ++++++++++++++++++++++--
 drivers/soc/ti/pm33xx.c                         |  21 +++-
 include/linux/platform_data/pm33xx.h            |   6 +-
 5 files changed, 160 insertions(+), 8 deletions(-)

[GIT PULL 3/4] ti-sysc driver changes for v5.7

[Tony Lindgren]

From: "Tony Lindgren" <tony@atomide.com>

The following changes since commit aec551c7a00fb7eae049c0c4cc3208ca53e26355:

  bus: ti-sysc: Fix 1-wire reset quirk (2020-02-26 10:03:35 -0800)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v5.7/ti-sysc-signed

for you to fetch changes up to b2745d92bb015cc4454d4195c4ce6e2852db397e:

  bus: ti-sysc: Add support for PRUSS SYSC type (2020-03-04 07:54:57 -0800)

----------------------------------------------------------------
Driver changes for ti-sysc for v5.7 merge window

Driver changes for ti-sysc interconnect target module driver mostly
to be able to probe display subsystem (DSS) without platform data:

- Rename clk_enable/disable quirks to less confusing pre and post
  reset quirks

- Enable module reset to work with modules with no sysconfig register

- Also consider non-existing module register when matching quirks

- Don't warn with nested ti-sysc devices

- Implement basic SoC revision handling

- Detect DSS related devices

- Implement DSS reset quirks

Note that there is also a DSS driver specific probe fix to allow
probing devices configured for interconnect target module data that
was agreed to be merged along with the ti-sysc driver changes.

And then there also changes to handle RTC, EDMA and PRUSS:

- Add module unlock quirk for RTC

- Detect EDMA modules

- Add support for handling PRUSS

----------------------------------------------------------------
Roger Quadros (1):
      dt-bindings: bus: ti-sysc: Add support for PRUSS SYSC type

Suman Anna (1):
      bus: ti-sysc: Add support for PRUSS SYSC type

Tony Lindgren (12):
      drm/omap: Prepare DSS for probing without legacy platform data
      bus: ti-sysc: Rename clk related quirks to pre_reset and post_reset quirks
      bus: ti-sysc: Improve reset to work with modules with no sysconfig
      bus: ti-sysc: Consider non-existing registers too when matching quirks
      bus: ti-sysc: Don't warn about legacy property for nested ti-sysc devices
      bus: ti-sysc: Implement SoC revision handling
      bus: ti-sysc: Handle module unlock quirk needed for some RTC
      bus: ti-sysc: Detect display subsystem related devices
      bus: ti-sysc: Implement display subsystem reset quirk
      Merge branch 'omap-for-v5.7/dss-probe' into omap-for-v5.7/ti-sysc
      bus: ti-sysc: Fix wrong offset for display subsystem reset quirk
      bus: ti-sysc: Detect EDMA and set quirk flags for tptc

 Documentation/devicetree/bindings/bus/ti-sysc.txt |   1 +
 arch/arm/mach-omap2/pdata-quirks.c                |   6 +
 drivers/bus/ti-sysc.c                             | 604 ++++++++++++++++++----
 drivers/gpu/drm/omapdrm/dss/dss.c                 |  25 +-
 drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c   |  25 +-
 include/dt-bindings/bus/ti-sysc.h                 |   4 +
 include/linux/platform_data/ti-sysc.h             |   5 +
 7 files changed, 570 insertions(+), 100 deletions(-)

[GIT PULL 4/4] dts changes for omaps for v5.7

[Tony Lindgren]

From: "Tony Lindgren" <tony@atomide.com>

The following changes since commit bb6d3fb354c5ee8d6bde2d576eb7220ea09862b9:

  Linux 5.6-rc1 (2020-02-09 16:08:48 -0800)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v5.7/dt-signed

for you to fetch changes up to 89a7b191fcd17e3f1dba963eb2cba8262b45a4d2:

  ARM: dts: am4372: Add idle_states for cpuidle (2020-02-27 09:33:33 -0800)

----------------------------------------------------------------
Devicetree changes for omaps for v5.7 merge window

Few device tree changes for omaps for v5.7 to configure omap5
AESS module and to add idle_states for am335x and am437x cpuidle.

----------------------------------------------------------------
Dave Gerlach (2):
      ARM: dts: am33xx: Add idle_states for cpuidle
      ARM: dts: am4372: Add idle_states for cpuidle

Tony Lindgren (1):
      ARM: dts: Configure omap5 AESS

 arch/arm/boot/dts/am33xx.dtsi       | 12 ++++++++++++
 arch/arm/boot/dts/am4372.dtsi       | 12 ++++++++++++
 arch/arm/boot/dts/omap5-l4-abe.dtsi | 16 ++++++++++++++--
 3 files changed, 38 insertions(+), 2 deletions(-)