[PATCH 5.15 000/168] 5.15.159-rc1 review

[PATCH 5.15 000/168] 5.15.159-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.15.159 release.
There are 168 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu, 16 May 2024 10:09:32 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.159-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.15.159-rc1

Johan Hovold <johan+linaro@kernel.org>
    Bluetooth: qca: fix firmware check error path

Johan Hovold <johan+linaro@kernel.org>
    Bluetooth: qca: fix NVM configuration parsing

Johan Hovold <johan+linaro@kernel.org>
    Bluetooth: qca: add missing firmware sanity checks

Johan Hovold <johan+linaro@kernel.org>
    regulator: core: fix debugfs creation regression

Lakshmi Yadlapati <lakshmiy@us.ibm.com>
    hwmon: (pmbus/ucd9000) Increase delay from 250 to 500us

Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
    net: fix out-of-bounds access in ops_init

Zack Rusin <zack.rusin@broadcom.com>
    drm/vmwgfx: Fix invalid reads in fence signaled events

Alexander Usyskin <alexander.usyskin@intel.com>
    mei: me: add lunar lake point M DID

Viken Dadhaniya <quic_vdadhani@quicinc.com>
    slimbus: qcom-ngd-ctrl: Add timeout for wait operation

Jim Cromie <jim.cromie@gmail.com>
    dyndbg: fix old BUG_ON in >control parser

Joao Paulo Goncalves <joao.goncalves@toradex.com>
    ASoC: ti: davinci-mcasp: Fix race condition during probe

Sameer Pujar <spujar@nvidia.com>
    ASoC: tegra: Fix DSPK 16-bit playback

Doug Berger <opendmb@gmail.com>
    net: bcmgenet: synchronize use of bcmgenet_set_rx_mode()

Paolo Abeni <pabeni@redhat.com>
    tipc: fix UAF in error path

Hans de Goede <hdegoede@redhat.com>
    iio: accel: mxc4005: Interrupt handling fixes

Ramona Gradinariu <ramona.bolboaca13@gmail.com>
    iio:imu: adis16475: Fix sync mode setting

Javier Carrasco <javier.carrasco.cruz@gmail.com>
    dt-bindings: iio: health: maxim,max30102: fix compatible check

Paolo Abeni <pabeni@redhat.com>
    mptcp: ensure snd_nxt is properly initialized on connect

Dominique Martinet <dominique.martinet@atmark-techno.com>
    btrfs: add missing mutex_unlock in btrfs_relocate_sys_chunks()

Aman Dhoot <amandhoot12@gmail.com>
    ALSA: hda/realtek: Fix mute led of HP Laptop 15-da3001TU

Thinh Nguyen <Thinh.Nguyen@synopsys.com>
    usb: dwc3: core: Prevent phy suspend during init

Thinh Nguyen <Thinh.Nguyen@synopsys.com>
    usb: xhci-plat: Don't include xhci.h

Chris Wulff <Chris.Wulff@biamp.com>
    usb: gadget: f_fs: Fix a race condition when processing setup packets.

Peter Korsgaard <peter@korsgaard.com>
    usb: gadget: composite: fix OS descriptors w_value logic

Guenter Roeck <linux@roeck-us.net>
    usb: ohci: Prevent missed ohci interrupts

Alan Stern <stern@rowland.harvard.edu>
    usb: Fix regression caused by invalid ep0 maxpacket in virtual SuperSpeed device

Christian A. Ehrhardt <lk@c--e.de>
    usb: typec: ucsi: Fix connector check on init

Christian A. Ehrhardt <lk@c--e.de>
    usb: typec: ucsi: Check for notifications after init

Rob Herring <robh@kernel.org>
    arm64: dts: qcom: Fix 'interrupt-map' parent address cells

Linus Torvalds <torvalds@linux-foundation.org>
    Reapply "drm/qxl: simplify qxl_fence_wait"

Thanassis Avgerinos <thanassis.avgerinos@gmail.com>
    firewire: nosy: ensure user_length is taken into account when fetching packet contents

Dmitry Antipov <dmantipov@yandex.ru>
    btrfs: fix kvcalloc() arguments order in btrfs_ioctl_send()

Vanshidhar Konda <vanshikonda@os.amperecomputing.com>
    ACPI: CPPC: Fix access width used for PCC registers

Jarred White <jarredwhite@linux.microsoft.com>
    ACPI: CPPC: Fix bit_offset shift in MASK_VAL() macro

Easwar Hariharan <eahariha@linux.microsoft.com>
    Revert "Revert "ACPI: CPPC: Use access_width over bit_width for system memory accesses""

Gabe Teeger <gabe.teeger@amd.com>
    drm/amd/display: Atom Integrated System Info v2_2 for DCN35

Douglas Anderson <dianders@chromium.org>
    drm/connector: Add \n to message about demoting connector force-probes

Jerome Brunet <jbrunet@baylibre.com>
    drm/meson: dw-hdmi: add bandgap setting for g12

Jerome Brunet <jbrunet@baylibre.com>
    drm/meson: dw-hdmi: power up phy on device init

Yonglong Liu <liuyonglong@huawei.com>
    net: hns3: fix port vlan filter not disabled issue

Jian Shen <shenjian15@huawei.com>
    net: hns3: split function hclge_init_vlan_config()

Peiyang Wang <wangpeiyang1@huawei.com>
    net: hns3: use appropriate barrier function after setting a bit value

Peiyang Wang <wangpeiyang1@huawei.com>
    net: hns3: change type of numa_node_mask as nodemask_t

Jie Wang <wangjie125@huawei.com>
    net: hns3: refactor hclge_cmd_send with new hclge_comm_cmd_send API

Jie Wang <wangjie125@huawei.com>
    net: hns3: create new set of unified hclge_comm_cmd_send APIs

Jie Wang <wangjie125@huawei.com>
    net: hns3: create new cmdq hardware description structure hclge_comm_hw

Jie Wang <wangjie125@huawei.com>
    net: hns3: refactor hns3 makefile to support hns3_common module

Jian Shen <shenjian15@huawei.com>
    net: hns3: direct return when receive a unknown mailbox message

Hao Lan <lanhao@huawei.com>
    net: hns3: refactor function hclge_mbx_handler()

Guangbin Huang <huangguangbin2@huawei.com>
    net: hns3: add query vf ring and vector map relation

Yufeng Mo <moyufeng@huawei.com>
    net: hns3: add log for workqueue scheduled late

Peiyang Wang <wangpeiyang1@huawei.com>
    net: hns3: using user configure after hardware reset

Guangbin Huang <huangguangbin2@huawei.com>
    net: hns3: PF support get unicast MAC address space assigned by firmware

Eric Dumazet <edumazet@google.com>
    ipv6: fib6_rules: avoid possible NULL dereference in fib6_rule_action()

Felix Fietkau <nbd@nbd.name>
    net: bridge: fix corrupted ethernet header on multicast-to-unicast

Eric Dumazet <edumazet@google.com>
    phonet: fix rtm_phonet_notify() skb allocation

Aleksa Savic <savicaleksa83@gmail.com>
    hwmon: (corsair-cpro) Protect ccp->wait_input_report with a spinlock

Aleksa Savic <savicaleksa83@gmail.com>
    hwmon: (corsair-cpro) Use complete_all() instead of complete() in ccp_raw_event()

Aleksa Savic <savicaleksa83@gmail.com>
    hwmon: (corsair-cpro) Use a separate buffer for sending commands

Roded Zats <rzats@paloaltonetworks.com>
    rtnetlink: Correct nested IFLA_VF_VLAN_LIST attribute validation

Duoming Zhou <duoming@zju.edu.cn>
    Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout

Duoming Zhou <duoming@zju.edu.cn>
    Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp: Use refcount_inc_not_zero() in tcp_twsk_unique().

Eric Dumazet <edumazet@google.com>
    tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets

Boy.Wu <boy.wu@mediatek.com>
    ARM: 9381/1: kasan: clear stale stack poison

Paul Davey <paul.davey@alliedtelesis.co.nz>
    xfrm: Preserve vlan tags for transport mode software GRO

Al Viro <viro@zeniv.linux.org.uk>
    qibfs: fix dentry leak

Neil Armstrong <narmstrong@baylibre.com>
    ASoC: meson: axg-tdm-interface: Fix formatters in trigger"

Neil Armstrong <narmstrong@baylibre.com>
    ASoC: meson: axg-card: Fix nonatomic links

John Fastabend <john.fastabend@gmail.com>
    bpf, sockmap: Improved check for empty queue

John Fastabend <john.fastabend@gmail.com>
    bpf, sockmap: Reschedule is now done through backlog

John Fastabend <john.fastabend@gmail.com>
    bpf, sockmap: Convert schedule_work into delayed_work

John Fastabend <john.fastabend@gmail.com>
    bpf, sockmap: Handle fin correctly

John Fastabend <john.fastabend@gmail.com>
    bpf, sockmap: TCP data stall on recv before accept

Vanillan Wang <vanillanwang@163.com>
    net:usb:qmi_wwan: support Rolling modules

Lyude Paul <lyude@redhat.com>
    drm/nouveau/dp: Don't probe eDP ports twice harder

Joakim Sindholt <opensource@zhasha.com>
    fs/9p: drop inodes immediately on non-.L too

Stephen Boyd <sboyd@kernel.org>
    clk: Don't hold prepare_lock when calling kref_put()

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    gpio: crystalcove: Use -ENOTSUPP consistently

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    gpio: wcove: Use -ENOTSUPP consistently

Jeff Layton <jlayton@kernel.org>
    9p: explicitly deny setlease attempts

Joakim Sindholt <opensource@zhasha.com>
    fs/9p: translate O_TRUNC into OTRUNC

Joakim Sindholt <opensource@zhasha.com>
    fs/9p: only translate RWX permissions for plain 9P2000

Krzysztof Kozlowski <krzk@kernel.org>
    iommu: mtk: fix module autoloading

John Stultz <jstultz@google.com>
    selftests: timers: Fix valid-adjtimex signed left-shift undefined behavior

Jiaxun Yang <jiaxun.yang@flygoat.com>
    MIPS: scall: Save thread_info.syscall unconditionally on entry

Thierry Reding <treding@nvidia.com>
    gpu: host1x: Do not setup DMA for virtual devices

Rik van Riel <riel@surriel.com>
    blk-iocost: avoid out of bounds shift

Maurizio Lombardi <mlombard@redhat.com>
    scsi: target: Fix SELinux error when systemd-modules loads the target module

Boris Burkov <boris@bur.io>
    btrfs: always clear PERTRANS metadata during commit

Boris Burkov <boris@bur.io>
    btrfs: make btrfs_clear_delalloc_extent() free delalloc reserve

Peng Liu <liupeng17@lenovo.com>
    tools/power turbostat: Fix Bzy_MHz documentation typo

Doug Smythies <dsmythies@telus.net>
    tools/power turbostat: Fix added raw MSR output

Adam Goldman <adamg@pobox.com>
    firewire: ohci: mask bus reset interrupts between ISR and bottom half

Chen Ni <nichen@iscas.ac.cn>
    ata: sata_gemini: Check clk_enable() result

Phil Elwell <phil@raspberrypi.com>
    net: bcmgenet: Reset RBUF on first open

Takashi Iwai <tiwai@suse.de>
    ALSA: line6: Zero-initialize message buffers

Borislav Petkov (AMD) <bp@alien8.de>
    kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries

Anand Jain <anand.jain@oracle.com>
    btrfs: return accurate error code on open failure in open_fs_devices()

Saurav Kashyap <skashyap@marvell.com>
    scsi: bnx2fc: Remove spin_lock_bh while releasing resources after upload

linke li <lilinke99@qq.com>
    net: mark racy access on sk->sk_rcvbuf

Igor Artemiev <Igor.A.Artemiev@mcst.ru>
    wifi: cfg80211: fix rdev_dump_mpp() arguments order

Jeff Johnson <quic_jjohnson@quicinc.com>
    wifi: mac80211: fix ieee80211_bss_*_flags kernel-doc

Andrew Price <anprice@redhat.com>
    gfs2: Fix invalid metadata access in punch_hole

Justin Tee <justin.tee@broadcom.com>
    scsi: lpfc: Replace hbalock with ndlp lock in lpfc_nvme_unregister_port()

Justin Tee <justin.tee@broadcom.com>
    scsi: lpfc: Update lpfc_ramp_down_queue_handler() logic

Justin Tee <justin.tee@broadcom.com>
    scsi: lpfc: Move NPIV's transport unregistration to after resource clean up

Oliver Upton <oliver.upton@linux.dev>
    KVM: arm64: vgic-v2: Check for non-NULL vCPU in vgic_v2_parse_attr()

Marc Zyngier <maz@kernel.org>
    KVM: arm64: vgic-v2: Use cpuid from userspace as vcpu_id

Jernej Skrabec <jernej.skrabec@gmail.com>
    clk: sunxi-ng: h6: Reparent CPUX during PLL CPUX rate change

Richard Gobert <richardbgobert@gmail.com>
    net: gro: add flush check in udp_gro_receive_segment

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    drm/panel: ili9341: Use predefined error codes

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    drm/panel: ili9341: Respect deferred probe

Alexandra Winter <wintera@linux.ibm.com>
    s390/qeth: Fix kernel panic after setting hsuid

Julian Wiedmann <jwi@linux.ibm.com>
    s390/qeth: don't keep track of Input Queue count

Xin Long <lucien.xin@gmail.com>
    tipc: fix a possible memleak in tipc_buf_append

Felix Fietkau <nbd@nbd.name>
    net: core: reject skb_copy(_expand) for fraglist GSO skbs

Felix Fietkau <nbd@nbd.name>
    net: bridge: fix multicast-to-unicast with fraglist GSO

Marek Behún <kabel@kernel.org>
    net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341

Sebastian Andrzej Siewior <bigeasy@linutronix.de>
    cxgb4: Properly lock TX queue for the selftest.

Bui Quang Minh <minhquangbui99@gmail.com>
    s390/cio: Ensure the copied buf is NUL terminated

Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
    ALSA: hda: intel-sdw-acpi: fix usage of device_get_named_child_node()

Jerome Brunet <jbrunet@baylibre.com>
    ASoC: meson: cards: select SND_DYNAMIC_MINORS

Jerome Brunet <jbrunet@baylibre.com>
    ASoC: meson: axg-tdm-interface: manage formatters in trigger

Jerome Brunet <jbrunet@baylibre.com>
    ASoC: meson: axg-card: make links nonatomic

Jerome Brunet <jbrunet@baylibre.com>
    ASoC: meson: axg-fifo: use threaded irq to check periods

Jerome Brunet <jbrunet@baylibre.com>
    ASoC: meson: axg-fifo: use FIELD helpers

Asbjørn Sloth Tønnesen <ast@fiberby.net>
    net: qede: use return from qede_parse_actions()

Asbjørn Sloth Tønnesen <ast@fiberby.net>
    net: qede: use return from qede_parse_flow_attr() for flow_spec

Asbjørn Sloth Tønnesen <ast@fiberby.net>
    net: qede: use return from qede_parse_flow_attr() for flower

Asbjørn Sloth Tønnesen <ast@fiberby.net>
    net: qede: sanitize 'rc' in qede_add_tc_flower_fltr()

Jens Remus <jremus@linux.ibm.com>
    s390/vdso: Add CFI for RA register to asm macro vdso_func

David Bauer <mail@david-bauer.net>
    net l2tp: drop flow hash on forward

Kuniyuki Iwashima <kuniyu@amazon.com>
    nsh: Restore skb->{protocol,data,mac_header} for outer header in nsh_gso_segment().

Bui Quang Minh <minhquangbui99@gmail.com>
    octeontx2-af: avoid off-by-one read from userspace

Bui Quang Minh <minhquangbui99@gmail.com>
    bna: ensure the copied buf is NUL terminated

Toke Høiland-Jørgensen <toke@redhat.com>
    xdp: use flags field to disambiguate broadcast redirect

Toke Høiland-Jørgensen <toke@redhat.com>
    xdp: Add xdp_do_redirect_frame() for pre-computed xdp_frames

Toke Høiland-Jørgensen <toke@redhat.com>
    xdp: Move conversion to xdp_frame out of map functions

Claudio Imbrenda <imbrenda@linux.ibm.com>
    s390/mm: Fix clearing storage keys for huge pages

Claudio Imbrenda <imbrenda@linux.ibm.com>
    s390/mm: Fix storage key clearing for guest huge pages

Devyn Liu <liudingyuan@huawei.com>
    spi: hisi-kunpeng: Delete the dump interface of data registers in debugfs

Anton Protopopov <aspsk@isovalent.com>
    bpf: Fix a verifier verbose message

Jason Xing <kernelxing@tencent.com>
    bpf, skmsg: Fix NULL pointer dereference in sk_psock_skb_ingress_enqueue

Andrii Nakryiko <andrii@kernel.org>
    bpf, kconfig: Fix DEBUG_INFO_BTF_MODULES Kconfig definition

AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
    regulator: mt6360: De-capitalize devicetree regulator subnodes

Zeng Heng <zengheng4@huawei.com>
    pinctrl: devicetree: fix refcount leak in pinctrl_dt_to_map()

AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
    power: supply: mt6360_charger: Fix of_match for usb-otg-vbus regulator

Arnd Bergmann <arnd@arndb.de>
    power: rt9455: hide unused rt9455_boost_voltage_values

Kuniyuki Iwashima <kuniyu@amazon.com>
    nfs: Handle error of rpc_proc_register() in nfs_net_init().

Josef Bacik <josef@toxicpanda.com>
    nfs: make the rpc_stat per net namespace

Josef Bacik <josef@toxicpanda.com>
    nfs: expose /proc/net/sunrpc/nfs in net namespaces

Josef Bacik <josef@toxicpanda.com>
    sunrpc: add a struct rpc_stats arg to rpc_create_args

Chen-Yu Tsai <wenst@chromium.org>
    pinctrl: mediatek: paris: Rework support for PIN_CONFIG_{INPUT,OUTPUT}_ENABLE

Chen-Yu Tsai <wenst@chromium.org>
    pinctrl: mediatek: paris: Fix PIN_CONFIG_INPUT_SCHMITT_ENABLE readback

Chen-Yu Tsai <wenst@chromium.org>
    pinctrl: mediatek: paris: Rework mtk_pinconf_{get,set} switch/case logic

Dan Carpenter <dan.carpenter@linaro.org>
    pinctrl: core: delete incorrect free in pinctrl_enable()

Jan Dakinevich <jan.dakinevich@salutedevices.com>
    pinctrl/meson: fix typo in PDM's pin name

Billy Tsai <billy_tsai@aspeedtech.com>
    pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T

Daniel Okazaki <dtokazaki@google.com>
    eeprom: at24: fix memory corruption race condition

Heiner Kallweit <hkallweit1@gmail.com>
    eeprom: at24: Probe for DDR3 thermal sensor in the SPD case

Alexander Stein <alexander.stein@ew.tq-group.com>
    eeprom: at24: Use dev_err_probe for nvmem register failure

Marios Makassikis <mmakassikis@freebox.fr>
    ksmbd: clear RENAME_NOREPLACE before calling vfs_rename

Namjae Jeon <linkinjeon@kernel.org>
    ksmbd: validate request buffer size in smb2_allocate_rsp_buf()

Namjae Jeon <linkinjeon@kernel.org>
    ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf

Johannes Berg <johannes.berg@intel.com>
    wifi: nl80211: don't free NULL coalescing rule

Vinod Koul <vkoul@kernel.org>
    dmaengine: Revert "dmaengine: pl330: issue_pending waits until WFP state"

Bumyong Lee <bumyong.lee@samsung.com>
    dmaengine: pl330: issue_pending waits until WFP state


-------------

Diffstat:

 .../bindings/iio/health/maxim,max30102.yaml        |   2 +-
 Makefile                                           |   4 +-
 arch/arm/kernel/sleep.S                            |   4 +
 arch/arm64/boot/dts/qcom/msm8998.dtsi              |   8 +-
 arch/arm64/boot/dts/qcom/sdm845.dtsi               |  16 +-
 arch/arm64/kvm/vgic/vgic-kvm-device.c              |  12 +-
 arch/mips/include/asm/ptrace.h                     |   2 +-
 arch/mips/kernel/asm-offsets.c                     |   1 +
 arch/mips/kernel/ptrace.c                          |  15 +-
 arch/mips/kernel/scall32-o32.S                     |  23 +-
 arch/mips/kernel/scall64-n32.S                     |   3 +-
 arch/mips/kernel/scall64-n64.S                     |   3 +-
 arch/mips/kernel/scall64-o32.S                     |  33 +-
 arch/s390/include/asm/dwarf.h                      |   1 +
 arch/s390/kernel/vdso64/vdso_user_wrapper.S        |   2 +
 arch/s390/mm/gmap.c                                |   2 +-
 arch/s390/mm/hugetlbpage.c                         |   2 +-
 block/blk-iocost.c                                 |   7 +-
 drivers/acpi/cppc_acpi.c                           |  67 ++-
 drivers/ata/sata_gemini.c                          |   5 +-
 drivers/bluetooth/btqca.c                          |  62 ++-
 drivers/clk/clk.c                                  |  12 +-
 drivers/clk/sunxi-ng/ccu-sun50i-h6.c               |  19 +-
 drivers/firewire/nosy.c                            |   6 +-
 drivers/firewire/ohci.c                            |   6 +-
 drivers/gpio/gpio-crystalcove.c                    |   2 +-
 drivers/gpio/gpio-wcove.c                          |   2 +-
 drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c |   1 +
 drivers/gpu/drm/drm_connector.c                    |   2 +-
 drivers/gpu/drm/meson/meson_dw_hdmi.c              |  70 ++-
 drivers/gpu/drm/nouveau/nouveau_dp.c               |  13 +-
 drivers/gpu/drm/panel/panel-ilitek-ili9341.c       |   8 +-
 drivers/gpu/drm/qxl/qxl_release.c                  |  50 +--
 drivers/gpu/drm/vmwgfx/vmwgfx_fence.c              |   2 +-
 drivers/gpu/host1x/bus.c                           |   8 -
 drivers/hwmon/corsair-cpro.c                       |  43 +-
 drivers/hwmon/pmbus/ucd9000.c                      |   6 +-
 drivers/iio/accel/mxc4005.c                        |  24 +-
 drivers/iio/imu/adis16475.c                        |   4 +-
 drivers/infiniband/hw/qib/qib_fs.c                 |   1 +
 drivers/iommu/mtk_iommu.c                          |   1 +
 drivers/iommu/mtk_iommu_v1.c                       |   1 +
 drivers/misc/eeprom/at24.c                         |  46 +-
 drivers/misc/mei/hw-me-regs.h                      |   2 +
 drivers/misc/mei/pci-me.c                          |   2 +
 drivers/net/dsa/mv88e6xxx/chip.c                   |   4 +-
 drivers/net/ethernet/broadcom/genet/bcmgenet.c     |  20 +-
 drivers/net/ethernet/brocade/bna/bnad_debugfs.c    |   4 +-
 drivers/net/ethernet/chelsio/cxgb4/sge.c           |   6 +-
 drivers/net/ethernet/hisilicon/hns3/Makefile       |  18 +-
 drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h    |  15 +
 drivers/net/ethernet/hisilicon/hns3/hnae3.h        |   3 +-
 .../hisilicon/hns3/hns3_common/hclge_comm_cmd.c    | 259 +++++++++++
 .../hisilicon/hns3/hns3_common/hclge_comm_cmd.h    | 121 +++++
 drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c |   2 +
 .../net/ethernet/hisilicon/hns3/hns3pf/Makefile    |  12 -
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c | 311 ++-----------
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h |  85 +---
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c    | 221 +++++----
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h    |  17 +-
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 494 +++++++++++++++------
 .../ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c    |   4 +-
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c |   2 +-
 .../net/ethernet/hisilicon/hns3/hns3vf/Makefile    |  10 -
 .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c  |  10 +-
 .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h  |   2 +-
 .../ethernet/marvell/octeontx2/af/rvu_debugfs.c    |   4 +-
 drivers/net/ethernet/qlogic/qede/qede_filter.c     |  14 +-
 drivers/net/usb/qmi_wwan.c                         |   1 +
 drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c         |  34 +-
 drivers/pinctrl/core.c                             |   8 +-
 drivers/pinctrl/devicetree.c                       |  10 +-
 drivers/pinctrl/mediatek/pinctrl-paris.c           | 180 +++-----
 drivers/pinctrl/meson/pinctrl-meson-a1.c           |   6 +-
 drivers/power/supply/mt6360_charger.c              |   2 +-
 drivers/power/supply/rt9455_charger.c              |   2 +
 drivers/regulator/core.c                           |  27 +-
 drivers/regulator/mt6360-regulator.c               |  32 +-
 drivers/s390/cio/cio_inject.c                      |   2 +-
 drivers/s390/net/qeth_core.h                       |   1 -
 drivers/s390/net/qeth_core_main.c                  |  78 ++--
 drivers/scsi/bnx2fc/bnx2fc_tgt.c                   |   2 -
 drivers/scsi/lpfc/lpfc.h                           |   1 -
 drivers/scsi/lpfc/lpfc_nvme.c                      |   4 +-
 drivers/scsi/lpfc/lpfc_scsi.c                      |  13 +-
 drivers/scsi/lpfc/lpfc_vport.c                     |   8 +-
 drivers/slimbus/qcom-ngd-ctrl.c                    |   6 +-
 drivers/spi/spi-hisi-kunpeng.c                     |   2 -
 drivers/target/target_core_configfs.c              |  12 +
 drivers/usb/core/hub.c                             |   5 +-
 drivers/usb/dwc3/core.c                            |  90 ++--
 drivers/usb/dwc3/core.h                            |   1 +
 drivers/usb/dwc3/gadget.c                          |   2 +
 drivers/usb/dwc3/host.c                            |  27 ++
 drivers/usb/gadget/composite.c                     |   6 +-
 drivers/usb/gadget/function/f_fs.c                 |   2 +-
 drivers/usb/host/ohci-hcd.c                        |   8 +
 drivers/usb/host/xhci-plat.h                       |   4 +-
 drivers/usb/typec/ucsi/ucsi.c                      |  12 +-
 fs/9p/vfs_file.c                                   |   2 +
 fs/9p/vfs_inode.c                                  |   5 +-
 fs/9p/vfs_super.c                                  |   1 +
 fs/btrfs/inode.c                                   |   2 +-
 fs/btrfs/send.c                                    |   4 +-
 fs/btrfs/transaction.c                             |   2 +-
 fs/btrfs/volumes.c                                 |  18 +-
 fs/gfs2/bmap.c                                     |   5 +-
 fs/ksmbd/server.c                                  |  13 +-
 fs/ksmbd/smb2pdu.c                                 |   4 +
 fs/ksmbd/vfs.c                                     |   5 +
 fs/nfs/client.c                                    |   5 +-
 fs/nfs/inode.c                                     |  13 +-
 fs/nfs/internal.h                                  |   2 -
 fs/nfs/netns.h                                     |   2 +
 include/linux/bpf.h                                |  20 +-
 include/linux/dma-fence.h                          |   7 -
 include/linux/filter.h                             |   4 +
 include/linux/skbuff.h                             |  15 +
 include/linux/skmsg.h                              |   5 +-
 include/linux/sunrpc/clnt.h                        |   1 +
 include/net/xfrm.h                                 |   3 +
 kernel/bpf/cpumap.c                                |   8 +-
 kernel/bpf/devmap.c                                |  32 +-
 kernel/bpf/verifier.c                              |   3 +-
 lib/Kconfig.debug                                  |   5 +-
 lib/dynamic_debug.c                                |   6 +-
 net/bluetooth/l2cap_core.c                         |   3 +
 net/bluetooth/sco.c                                |   4 +
 net/bridge/br_forward.c                            |   9 +-
 net/core/filter.c                                  | 117 ++++-
 net/core/net_namespace.c                           |  13 +-
 net/core/rtnetlink.c                               |   2 +-
 net/core/skbuff.c                                  |  27 +-
 net/core/skmsg.c                                   |  53 +--
 net/core/sock.c                                    |   4 +-
 net/core/sock_map.c                                |   3 +-
 net/ipv4/tcp.c                                     |   4 +-
 net/ipv4/tcp_bpf.c                                 |  51 +++
 net/ipv4/tcp_input.c                               |   2 +
 net/ipv4/tcp_ipv4.c                                |   8 +-
 net/ipv4/tcp_output.c                              |   4 +-
 net/ipv4/udp_offload.c                             |  12 +-
 net/ipv4/xfrm4_input.c                             |   6 +-
 net/ipv6/fib6_rules.c                              |   6 +-
 net/ipv6/xfrm6_input.c                             |   6 +-
 net/l2tp/l2tp_eth.c                                |   3 +
 net/mac80211/ieee80211_i.h                         |   4 +-
 net/mptcp/protocol.c                               |   3 +
 net/nsh/nsh.c                                      |  14 +-
 net/phonet/pn_netlink.c                            |   2 +-
 net/sunrpc/clnt.c                                  |   5 +-
 net/tipc/msg.c                                     |   8 +-
 net/wireless/nl80211.c                             |   2 +
 net/wireless/trace.h                               |   2 +-
 net/xfrm/xfrm_input.c                              |   8 +
 scripts/Makefile.modfinal                          |   2 +-
 sound/hda/intel-sdw-acpi.c                         |   2 +
 sound/pci/hda/patch_realtek.c                      |   1 +
 sound/soc/meson/Kconfig                            |   1 +
 sound/soc/meson/axg-fifo.c                         |  56 ++-
 sound/soc/meson/axg-fifo.h                         |  12 +-
 sound/soc/meson/axg-frddr.c                        |   5 +-
 sound/soc/meson/axg-toddr.c                        |  22 +-
 sound/soc/tegra/tegra186_dspk.c                    |   7 +-
 sound/soc/ti/davinci-mcasp.c                       |  12 +-
 sound/usb/line6/driver.c                           |   6 +-
 tools/power/x86/turbostat/turbostat.8              |   2 +-
 tools/power/x86/turbostat/turbostat.c              |   7 +-
 tools/testing/selftests/timers/valid-adjtimex.c    |  73 ++-
 169 files changed, 2199 insertions(+), 1417 deletions(-)

[PATCH 5.15 001/168] dmaengine: pl330: issue_pending waits until WFP state

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bumyong Lee <bumyong.lee@samsung.com>

[ Upstream commit 22a9d9585812440211b0b34a6bc02ade62314be4 ]

According to DMA-330 errata notice[1] 71930, DMAKILL
cannot clear internal signal, named pipeline_req_active.
it makes that pl330 would wait forever in WFP state
although dma already send dma request if pl330 gets
dma request before entering WFP state.

The errata suggests that polling until entering WFP state
as workaround and then peripherals allows to issue dma request.

[1]: https://developer.arm.com/documentation/genc008428/latest

Signed-off-by: Bumyong Lee <bumyong.lee@samsung.com>
Link: https://lore.kernel.org/r/20231219055026.118695-1-bumyong.lee@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: afc89870ea67 ("dmaengine: Revert "dmaengine: pl330: issue_pending waits until WFP state"")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/pl330.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index ec8a1565630b6..ba152a0024201 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -1053,6 +1053,9 @@ static bool _trigger(struct pl330_thread *thrd)
 
 	thrd->req_running = idx;
 
+	if (desc->rqtype == DMA_MEM_TO_DEV || desc->rqtype == DMA_DEV_TO_MEM)
+		UNTIL(thrd, PL330_STATE_WFP);
+
 	return true;
 }
 
-- 
2.43.0

[PATCH 5.15 002/168] dmaengine: Revert "dmaengine: pl330: issue_pending waits until WFP state"

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vinod Koul <vkoul@kernel.org>

[ Upstream commit afc89870ea677bd5a44516eb981f7a259b74280c ]

This reverts commit 22a9d9585812 ("dmaengine: pl330: issue_pending waits
until WFP state") as it seems to cause regression in pl330 driver.
Note the issue now exists in mainline so a fix to be done.

Cc: stable@vger.kernel.org
Reported-by: karthikeyan <karthikeyan@linumiz.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/pl330.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index ba152a0024201..ec8a1565630b6 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -1053,9 +1053,6 @@ static bool _trigger(struct pl330_thread *thrd)
 
 	thrd->req_running = idx;
 
-	if (desc->rqtype == DMA_MEM_TO_DEV || desc->rqtype == DMA_DEV_TO_MEM)
-		UNTIL(thrd, PL330_STATE_WFP);
-
 	return true;
 }
 
-- 
2.43.0

[PATCH 5.15 003/168] wifi: nl80211: dont free NULL coalescing rule

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 801ea33ae82d6a9d954074fbcf8ea9d18f1543a7 ]

If the parsing fails, we can dereference a NULL pointer here.

Cc: stable@vger.kernel.org
Fixes: be29b99a9b51 ("cfg80211/nl80211: Add packet coalesce support")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240418105220.b328f80406e7.Id75d961050deb05b3e4e354e024866f350c68103@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/nl80211.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 99149b10f86f6..d758ec5655892 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -12890,6 +12890,8 @@ static int nl80211_set_coalesce(struct sk_buff *skb, struct genl_info *info)
 error:
 	for (i = 0; i < new_coalesce.n_rules; i++) {
 		tmp_rule = &new_coalesce.rules[i];
+		if (!tmp_rule)
+			continue;
 		for (j = 0; j < tmp_rule->n_patterns; j++)
 			kfree(tmp_rule->patterns[j].mask);
 		kfree(tmp_rule->patterns);
-- 
2.43.0

[PATCH 5.15 004/168] ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Namjae Jeon <linkinjeon@kernel.org>

[ Upstream commit c119f4ede3fa90a9463f50831761c28f989bfb20 ]

If ->ProtocolId is SMB2_TRANSFORM_PROTO_NUM, smb2 request size
validation could be skipped. if request size is smaller than
sizeof(struct smb2_query_info_req), slab-out-of-bounds read can happen in
smb2_allocate_rsp_buf(). This patch allocate response buffer after
decrypting transform request. smb3_decrypt_req() will validate transform
request size and avoid slab-out-of-bound in smb2_allocate_rsp_buf().

Reported-by: Norbert Szetei <norbert@doyensec.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ksmbd/server.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/fs/ksmbd/server.c b/fs/ksmbd/server.c
index 11b201e6ee44b..63b01f7d97031 100644
--- a/fs/ksmbd/server.c
+++ b/fs/ksmbd/server.c
@@ -167,20 +167,17 @@ static void __handle_ksmbd_work(struct ksmbd_work *work,
 	int rc;
 	bool is_chained = false;
 
-	if (conn->ops->allocate_rsp_buf(work))
-		return;
-
 	if (conn->ops->is_transform_hdr &&
 	    conn->ops->is_transform_hdr(work->request_buf)) {
 		rc = conn->ops->decrypt_req(work);
-		if (rc < 0) {
-			conn->ops->set_rsp_status(work, STATUS_DATA_ERROR);
-			goto send;
-		}
-
+		if (rc < 0)
+			return;
 		work->encrypted = true;
 	}
 
+	if (conn->ops->allocate_rsp_buf(work))
+		return;
+
 	rc = conn->ops->init_rsp_hdr(work);
 	if (rc) {
 		/* either uid or tid is not correct */
-- 
2.43.0

[PATCH 5.15 005/168] ksmbd: validate request buffer size in smb2_allocate_rsp_buf()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Namjae Jeon <linkinjeon@kernel.org>

[ Upstream commit 17cf0c2794bdb6f39671265aa18aea5c22ee8c4a ]

The response buffer should be allocated in smb2_allocate_rsp_buf
before validating request. But the fields in payload as well as smb2 header
is used in smb2_allocate_rsp_buf(). This patch add simple buffer size
validation to avoid potencial out-of-bounds in request buffer.

Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ksmbd/smb2pdu.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c
index 86b1fb43104e9..57f59172d8212 100644
--- a/fs/ksmbd/smb2pdu.c
+++ b/fs/ksmbd/smb2pdu.c
@@ -536,6 +536,10 @@ int smb2_allocate_rsp_buf(struct ksmbd_work *work)
 	if (cmd == SMB2_QUERY_INFO_HE) {
 		struct smb2_query_info_req *req;
 
+		if (get_rfc1002_len(work->request_buf) <
+		    offsetof(struct smb2_query_info_req, OutputBufferLength))
+			return -EINVAL;
+
 		req = smb2_get_msg(work->request_buf);
 		if ((req->InfoType == SMB2_O_INFO_FILE &&
 		     (req->FileInfoClass == FILE_FULL_EA_INFORMATION ||
-- 
2.43.0

[PATCH 5.15 006/168] ksmbd: clear RENAME_NOREPLACE before calling vfs_rename

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marios Makassikis <mmakassikis@freebox.fr>

[ Upstream commit 4973b04d3ea577db80c501c5f14e68ec69fe1794 ]

File overwrite case is explicitly handled, so it is not necessary to
pass RENAME_NOREPLACE to vfs_rename.

Clearing the flag fixes rename operations when the share is a ntfs-3g
mount. The latter uses an older version of fuse with no support for
flags in the ->rename op.

Cc: stable@vger.kernel.org
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ksmbd/vfs.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/fs/ksmbd/vfs.c b/fs/ksmbd/vfs.c
index 173a488bfeee4..7afb2412c4d43 100644
--- a/fs/ksmbd/vfs.c
+++ b/fs/ksmbd/vfs.c
@@ -745,10 +745,15 @@ int ksmbd_vfs_rename(struct ksmbd_work *work, const struct path *old_path,
 		goto out4;
 	}
 
+	/*
+	 * explicitly handle file overwrite case, for compatibility with
+	 * filesystems that may not support rename flags (e.g: fuse)
+	 */
 	if ((flags & RENAME_NOREPLACE) && d_is_positive(new_dentry)) {
 		err = -EEXIST;
 		goto out4;
 	}
+	flags &= ~(RENAME_NOREPLACE);
 
 	if (old_child == trap) {
 		err = -EINVAL;
-- 
2.43.0

[PATCH 5.15 007/168] eeprom: at24: Use dev_err_probe for nvmem register failure

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit a3c10035d12f5ec10915d5c00c2e8f7d7c066182 ]

When using nvmem layouts it is possible devm_nvmem_register returns
-EPROBE_DEFER, resulting in an 'empty' in
/sys/kernel/debug/devices_deferred. Use dev_err_probe for providing
additional information.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Stable-dep-of: f42c97027fb7 ("eeprom: at24: fix memory corruption race condition")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/eeprom/at24.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 305ffad131a29..b100bbc888668 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -762,7 +762,8 @@ static int at24_probe(struct i2c_client *client)
 		pm_runtime_disable(dev);
 		if (!pm_runtime_status_suspended(dev))
 			regulator_disable(at24->vcc_reg);
-		return PTR_ERR(at24->nvmem);
+		return dev_err_probe(dev, PTR_ERR(at24->nvmem),
+				     "failed to register nvmem\n");
 	}
 
 	/*
-- 
2.43.0

[PATCH 5.15 008/168] eeprom: at24: Probe for DDR3 thermal sensor in the SPD case

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit caba40ec3531b0849f44502a03117796e8c9f4a1 ]

The DDR3 SPD data structure advertises the presence of a thermal
sensor on a DDR3 module in byte 32, bit 7. Let's use this information
to explicitly instantiate the thermal sensor I2C client instead of
having to rely on class-based I2C probing.

The temp sensor i2c address can be derived from the SPD i2c address,
so we can directly instantiate the device and don't have to probe
for it. If the temp sensor has been instantiated already by other
means (e.g. class-based auto-detection), then the busy-check in
i2c_new_client_device will detect this.

Note: Thermal sensors on DDR4 DIMM's are instantiated from the
      ee1004 driver.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/68113672-3724-44d5-9ff8-313dd6628f8c@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: f42c97027fb7 ("eeprom: at24: fix memory corruption race condition")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/eeprom/at24.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index b100bbc888668..65a7517c031a7 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -585,6 +585,31 @@ static unsigned int at24_get_offset_adj(u8 flags, unsigned int byte_len)
 	}
 }
 
+static void at24_probe_temp_sensor(struct i2c_client *client)
+{
+	struct at24_data *at24 = i2c_get_clientdata(client);
+	struct i2c_board_info info = { .type = "jc42" };
+	int ret;
+	u8 val;
+
+	/*
+	 * Byte 2 has value 11 for DDR3, earlier versions don't
+	 * support the thermal sensor present flag
+	 */
+	ret = at24_read(at24, 2, &val, 1);
+	if (ret || val != 11)
+		return;
+
+	/* Byte 32, bit 7 is set if temp sensor is present */
+	ret = at24_read(at24, 32, &val, 1);
+	if (ret || !(val & BIT(7)))
+		return;
+
+	info.addr = 0x18 | (client->addr & 7);
+
+	i2c_new_client_device(client->adapter, &info);
+}
+
 static int at24_probe(struct i2c_client *client)
 {
 	struct regmap_config regmap_config = { };
@@ -778,6 +803,10 @@ static int at24_probe(struct i2c_client *client)
 		return -ENODEV;
 	}
 
+	/* If this a SPD EEPROM, probe for DDR3 thermal sensor */
+	if (cdata == &at24_data_spd)
+		at24_probe_temp_sensor(client);
+
 	pm_runtime_idle(dev);
 
 	if (writable)
-- 
2.43.0

[PATCH 5.15 009/168] eeprom: at24: fix memory corruption race condition

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Okazaki <dtokazaki@google.com>

[ Upstream commit f42c97027fb75776e2e9358d16bf4a99aeb04cf2 ]

If the eeprom is not accessible, an nvmem device will be registered, the
read will fail, and the device will be torn down. If another driver
accesses the nvmem device after the teardown, it will reference
invalid memory.

Move the failure point before registering the nvmem device.

Signed-off-by: Daniel Okazaki <dtokazaki@google.com>
Fixes: b20eb4c1f026 ("eeprom: at24: drop unnecessary label")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240422174337.2487142-1-dtokazaki@google.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/eeprom/at24.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 65a7517c031a7..02bea44369435 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -782,15 +782,6 @@ static int at24_probe(struct i2c_client *client)
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
 
-	at24->nvmem = devm_nvmem_register(dev, &nvmem_config);
-	if (IS_ERR(at24->nvmem)) {
-		pm_runtime_disable(dev);
-		if (!pm_runtime_status_suspended(dev))
-			regulator_disable(at24->vcc_reg);
-		return dev_err_probe(dev, PTR_ERR(at24->nvmem),
-				     "failed to register nvmem\n");
-	}
-
 	/*
 	 * Perform a one-byte test read to verify that the
 	 * chip is functional.
@@ -803,6 +794,15 @@ static int at24_probe(struct i2c_client *client)
 		return -ENODEV;
 	}
 
+	at24->nvmem = devm_nvmem_register(dev, &nvmem_config);
+	if (IS_ERR(at24->nvmem)) {
+		pm_runtime_disable(dev);
+		if (!pm_runtime_status_suspended(dev))
+			regulator_disable(at24->vcc_reg);
+		return dev_err_probe(dev, PTR_ERR(at24->nvmem),
+				     "failed to register nvmem\n");
+	}
+
 	/* If this a SPD EEPROM, probe for DDR3 thermal sensor */
 	if (cdata == &at24_data_spd)
 		at24_probe_temp_sensor(client);
-- 
2.43.0

[PATCH 5.15 010/168] pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Billy Tsai <billy_tsai@aspeedtech.com>

[ Upstream commit c10cd03d69403fa0f00be8631bd4cb4690440ebd ]

The register offset to disable the internal pull-down of GPIOR~T is 0x630
instead of 0x620, as specified in the Ast2600 datasheet v15
The datasheet can download from the official Aspeed website.

Fixes: 15711ba6ff19 ("pinctrl: aspeed-g6: Add AST2600 pinconf support")
Reported-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Message-ID: <20240313092809.2596644-1-billy_tsai@aspeedtech.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 34 +++++++++++-----------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
index 54064714d73fb..b223583dfb73c 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
@@ -43,7 +43,7 @@
 #define SCU614		0x614 /* Disable GPIO Internal Pull-Down #1 */
 #define SCU618		0x618 /* Disable GPIO Internal Pull-Down #2 */
 #define SCU61C		0x61c /* Disable GPIO Internal Pull-Down #3 */
-#define SCU620		0x620 /* Disable GPIO Internal Pull-Down #4 */
+#define SCU630		0x630 /* Disable GPIO Internal Pull-Down #4 */
 #define SCU634		0x634 /* Disable GPIO Internal Pull-Down #5 */
 #define SCU638		0x638 /* Disable GPIO Internal Pull-Down #6 */
 #define SCU690		0x690 /* Multi-function Pin Control #24 */
@@ -2487,38 +2487,38 @@ static struct aspeed_pin_config aspeed_g6_configs[] = {
 	ASPEED_PULL_DOWN_PINCONF(D14, SCU61C, 0),
 
 	/* GPIOS7 */
-	ASPEED_PULL_DOWN_PINCONF(T24, SCU620, 23),
+	ASPEED_PULL_DOWN_PINCONF(T24, SCU630, 23),
 	/* GPIOS6 */
-	ASPEED_PULL_DOWN_PINCONF(P23, SCU620, 22),
+	ASPEED_PULL_DOWN_PINCONF(P23, SCU630, 22),
 	/* GPIOS5 */
-	ASPEED_PULL_DOWN_PINCONF(P24, SCU620, 21),
+	ASPEED_PULL_DOWN_PINCONF(P24, SCU630, 21),
 	/* GPIOS4 */
-	ASPEED_PULL_DOWN_PINCONF(R26, SCU620, 20),
+	ASPEED_PULL_DOWN_PINCONF(R26, SCU630, 20),
 	/* GPIOS3*/
-	ASPEED_PULL_DOWN_PINCONF(R24, SCU620, 19),
+	ASPEED_PULL_DOWN_PINCONF(R24, SCU630, 19),
 	/* GPIOS2 */
-	ASPEED_PULL_DOWN_PINCONF(T26, SCU620, 18),
+	ASPEED_PULL_DOWN_PINCONF(T26, SCU630, 18),
 	/* GPIOS1 */
-	ASPEED_PULL_DOWN_PINCONF(T25, SCU620, 17),
+	ASPEED_PULL_DOWN_PINCONF(T25, SCU630, 17),
 	/* GPIOS0 */
-	ASPEED_PULL_DOWN_PINCONF(R23, SCU620, 16),
+	ASPEED_PULL_DOWN_PINCONF(R23, SCU630, 16),
 
 	/* GPIOR7 */
-	ASPEED_PULL_DOWN_PINCONF(U26, SCU620, 15),
+	ASPEED_PULL_DOWN_PINCONF(U26, SCU630, 15),
 	/* GPIOR6 */
-	ASPEED_PULL_DOWN_PINCONF(W26, SCU620, 14),
+	ASPEED_PULL_DOWN_PINCONF(W26, SCU630, 14),
 	/* GPIOR5 */
-	ASPEED_PULL_DOWN_PINCONF(T23, SCU620, 13),
+	ASPEED_PULL_DOWN_PINCONF(T23, SCU630, 13),
 	/* GPIOR4 */
-	ASPEED_PULL_DOWN_PINCONF(U25, SCU620, 12),
+	ASPEED_PULL_DOWN_PINCONF(U25, SCU630, 12),
 	/* GPIOR3*/
-	ASPEED_PULL_DOWN_PINCONF(V26, SCU620, 11),
+	ASPEED_PULL_DOWN_PINCONF(V26, SCU630, 11),
 	/* GPIOR2 */
-	ASPEED_PULL_DOWN_PINCONF(V24, SCU620, 10),
+	ASPEED_PULL_DOWN_PINCONF(V24, SCU630, 10),
 	/* GPIOR1 */
-	ASPEED_PULL_DOWN_PINCONF(U24, SCU620, 9),
+	ASPEED_PULL_DOWN_PINCONF(U24, SCU630, 9),
 	/* GPIOR0 */
-	ASPEED_PULL_DOWN_PINCONF(V25, SCU620, 8),
+	ASPEED_PULL_DOWN_PINCONF(V25, SCU630, 8),
 
 	/* GPIOX7 */
 	ASPEED_PULL_DOWN_PINCONF(AB10, SCU634, 31),
-- 
2.43.0

[PATCH 5.15 011/168] pinctrl/meson: fix typo in PDMs pin name

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Dakinevich <jan.dakinevich@salutedevices.com>

[ Upstream commit 368a90e651faeeb7049a876599cf2b0d74954796 ]

Other pins have _a or _x suffix, but this one doesn't have any. Most
likely this is a typo.

Fixes: dabad1ff8561 ("pinctrl: meson: add pinctrl driver support for Meson-A1 SoC")
Signed-off-by: Jan Dakinevich <jan.dakinevich@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Message-ID: <20240325113058.248022-1-jan.dakinevich@salutedevices.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/meson/pinctrl-meson-a1.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-a1.c b/drivers/pinctrl/meson/pinctrl-meson-a1.c
index 79f5d753d7e1a..50a87d9618a8e 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-a1.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-a1.c
@@ -250,7 +250,7 @@ static const unsigned int pdm_dclk_x_pins[]		= { GPIOX_10 };
 static const unsigned int pdm_din2_a_pins[]		= { GPIOA_6 };
 static const unsigned int pdm_din1_a_pins[]		= { GPIOA_7 };
 static const unsigned int pdm_din0_a_pins[]		= { GPIOA_8 };
-static const unsigned int pdm_dclk_pins[]		= { GPIOA_9 };
+static const unsigned int pdm_dclk_a_pins[]		= { GPIOA_9 };
 
 /* gen_clk */
 static const unsigned int gen_clk_x_pins[]		= { GPIOX_7 };
@@ -591,7 +591,7 @@ static struct meson_pmx_group meson_a1_periphs_groups[] = {
 	GROUP(pdm_din2_a,		3),
 	GROUP(pdm_din1_a,		3),
 	GROUP(pdm_din0_a,		3),
-	GROUP(pdm_dclk,			3),
+	GROUP(pdm_dclk_a,		3),
 	GROUP(pwm_c_a,			3),
 	GROUP(pwm_b_a,			3),
 
@@ -755,7 +755,7 @@ static const char * const spi_a_groups[] = {
 
 static const char * const pdm_groups[] = {
 	"pdm_din0_x", "pdm_din1_x", "pdm_din2_x", "pdm_dclk_x", "pdm_din2_a",
-	"pdm_din1_a", "pdm_din0_a", "pdm_dclk",
+	"pdm_din1_a", "pdm_din0_a", "pdm_dclk_a",
 };
 
 static const char * const gen_clk_groups[] = {
-- 
2.43.0

[PATCH 5.15 012/168] pinctrl: core: delete incorrect free in pinctrl_enable()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@linaro.org>

[ Upstream commit 5038a66dad0199de60e5671603ea6623eb9e5c79 ]

The "pctldev" struct is allocated in devm_pinctrl_register_and_init().
It's a devm_ managed pointer that is freed by devm_pinctrl_dev_release(),
so freeing it in pinctrl_enable() will lead to a double free.

The devm_pinctrl_dev_release() function frees the pindescs and destroys
the mutex as well.

Fixes: 6118714275f0 ("pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <578fbe56-44e9-487c-ae95-29b695650f7c@moroto.mountain>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/core.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 456b72041c34f..1c906fc68c1df 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -2098,13 +2098,7 @@ int pinctrl_enable(struct pinctrl_dev *pctldev)
 
 	error = pinctrl_claim_hogs(pctldev);
 	if (error) {
-		dev_err(pctldev->dev, "could not claim hogs: %i\n",
-			error);
-		pinctrl_free_pindescs(pctldev, pctldev->desc->pins,
-				      pctldev->desc->npins);
-		mutex_destroy(&pctldev->mutex);
-		kfree(pctldev);
-
+		dev_err(pctldev->dev, "could not claim hogs: %i\n", error);
 		return error;
 	}
 
-- 
2.43.0

[PATCH 5.15 013/168] pinctrl: mediatek: paris: Rework mtk_pinconf_{get,set} switch/case logic

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chen-Yu Tsai <wenst@chromium.org>

[ Upstream commit 9b780fa1ff14663c2e0f07ad098b96b8337f27a4 ]

The current code deals with optional features by testing for the
function pointers and returning -ENOTSUPP if it is not valid. This is
done for multiple pin config settings and results in the code that
handles the supporting cases to get indented by one level. This is
aggrevated by the fact that some features require another level of
conditionals.

Instead of assigning the same error code in all unsupported optional
feature cases, simply have that error code as the default, and break
out of the switch/case block whenever a feature is unsupported, or an
error is returned. This reduces indentation by one level for the useful
code.

Also replace the goto statements with break statements. The result is
the same, as the gotos simply exit the switch/case block, which can
also be achieved with a break statement. With the latter the intent
is clear and easier to understand.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-8-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Stable-dep-of: 08f66a8edd08 ("pinctrl: mediatek: paris: Fix PIN_CONFIG_INPUT_SCHMITT_ENABLE readback")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/mediatek/pinctrl-paris.c | 144 ++++++++++-------------
 1 file changed, 61 insertions(+), 83 deletions(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 0fa1c36148c23..f17325a738eaa 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -79,37 +79,34 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
 {
 	struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
 	u32 param = pinconf_to_config_param(*config);
-	int pullup, err, reg, ret = 1;
+	int pullup, reg, err = -ENOTSUPP, ret = 1;
 	const struct mtk_pin_desc *desc;
 
-	if (pin >= hw->soc->npins) {
-		err = -EINVAL;
-		goto out;
-	}
+	if (pin >= hw->soc->npins)
+		return -EINVAL;
+
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
 
 	switch (param) {
 	case PIN_CONFIG_BIAS_DISABLE:
 	case PIN_CONFIG_BIAS_PULL_UP:
 	case PIN_CONFIG_BIAS_PULL_DOWN:
-		if (hw->soc->bias_get_combo) {
-			err = hw->soc->bias_get_combo(hw, desc, &pullup, &ret);
-			if (err)
-				goto out;
-			if (ret == MTK_PUPD_SET_R1R0_00)
-				ret = MTK_DISABLE;
-			if (param == PIN_CONFIG_BIAS_DISABLE) {
-				if (ret != MTK_DISABLE)
-					err = -EINVAL;
-			} else if (param == PIN_CONFIG_BIAS_PULL_UP) {
-				if (!pullup || ret == MTK_DISABLE)
-					err = -EINVAL;
-			} else if (param == PIN_CONFIG_BIAS_PULL_DOWN) {
-				if (pullup || ret == MTK_DISABLE)
-					err = -EINVAL;
-			}
-		} else {
-			err = -ENOTSUPP;
+		if (!hw->soc->bias_get_combo)
+			break;
+		err = hw->soc->bias_get_combo(hw, desc, &pullup, &ret);
+		if (err)
+			break;
+		if (ret == MTK_PUPD_SET_R1R0_00)
+			ret = MTK_DISABLE;
+		if (param == PIN_CONFIG_BIAS_DISABLE) {
+			if (ret != MTK_DISABLE)
+				err = -EINVAL;
+		} else if (param == PIN_CONFIG_BIAS_PULL_UP) {
+			if (!pullup || ret == MTK_DISABLE)
+				err = -EINVAL;
+		} else if (param == PIN_CONFIG_BIAS_PULL_DOWN) {
+			if (pullup || ret == MTK_DISABLE)
+				err = -EINVAL;
 		}
 		break;
 	case PIN_CONFIG_SLEW_RATE:
@@ -119,7 +116,7 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
 	case PIN_CONFIG_OUTPUT_ENABLE:
 		err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &ret);
 		if (err)
-			goto out;
+			break;
 		/*     CONFIG     Current direction return value
 		 * -------------  ----------------- ----------------------
 		 * OUTPUT_ENABLE       output       1 (= HW value)
@@ -134,23 +131,21 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
 	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
 		err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &ret);
 		if (err)
-			goto out;
+			break;
 		/* return error when in output mode
 		 * because schmitt trigger only work in input mode
 		 */
 		if (ret) {
 			err = -EINVAL;
-			goto out;
+			break;
 		}
 
 		err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SMT, &ret);
-
 		break;
 	case PIN_CONFIG_DRIVE_STRENGTH:
-		if (hw->soc->drive_get)
-			err = hw->soc->drive_get(hw, desc, &ret);
-		else
-			err = -ENOTSUPP;
+		if (!hw->soc->drive_get)
+			break;
+		err = hw->soc->drive_get(hw, desc, &ret);
 		break;
 	case MTK_PIN_CONFIG_TDSEL:
 	case MTK_PIN_CONFIG_RDSEL:
@@ -160,23 +155,18 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
 		break;
 	case MTK_PIN_CONFIG_PU_ADV:
 	case MTK_PIN_CONFIG_PD_ADV:
-		if (hw->soc->adv_pull_get) {
-			pullup = param == MTK_PIN_CONFIG_PU_ADV;
-			err = hw->soc->adv_pull_get(hw, desc, pullup, &ret);
-		} else
-			err = -ENOTSUPP;
+		if (!hw->soc->adv_pull_get)
+			break;
+		pullup = param == MTK_PIN_CONFIG_PU_ADV;
+		err = hw->soc->adv_pull_get(hw, desc, pullup, &ret);
 		break;
 	case MTK_PIN_CONFIG_DRV_ADV:
-		if (hw->soc->adv_drive_get)
-			err = hw->soc->adv_drive_get(hw, desc, &ret);
-		else
-			err = -ENOTSUPP;
+		if (!hw->soc->adv_drive_get)
+			break;
+		err = hw->soc->adv_drive_get(hw, desc, &ret);
 		break;
-	default:
-		err = -ENOTSUPP;
 	}
 
-out:
 	if (!err)
 		*config = pinconf_to_config_packed(param, ret);
 
@@ -188,33 +178,29 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 {
 	struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
 	const struct mtk_pin_desc *desc;
-	int err = 0;
+	int err = -ENOTSUPP;
 	u32 reg;
 
-	if (pin >= hw->soc->npins) {
-		err = -EINVAL;
-		goto err;
-	}
+	if (pin >= hw->soc->npins)
+		return -EINVAL;
+
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
 
 	switch ((u32)param) {
 	case PIN_CONFIG_BIAS_DISABLE:
-		if (hw->soc->bias_set_combo)
-			err = hw->soc->bias_set_combo(hw, desc, 0, MTK_DISABLE);
-		else
-			err = -ENOTSUPP;
+		if (!hw->soc->bias_set_combo)
+			break;
+		err = hw->soc->bias_set_combo(hw, desc, 0, MTK_DISABLE);
 		break;
 	case PIN_CONFIG_BIAS_PULL_UP:
-		if (hw->soc->bias_set_combo)
-			err = hw->soc->bias_set_combo(hw, desc, 1, arg);
-		else
-			err = -ENOTSUPP;
+		if (!hw->soc->bias_set_combo)
+			break;
+		err = hw->soc->bias_set_combo(hw, desc, 1, arg);
 		break;
 	case PIN_CONFIG_BIAS_PULL_DOWN:
-		if (hw->soc->bias_set_combo)
-			err = hw->soc->bias_set_combo(hw, desc, 0, arg);
-		else
-			err = -ENOTSUPP;
+		if (!hw->soc->bias_set_combo)
+			break;
+		err = hw->soc->bias_set_combo(hw, desc, 0, arg);
 		break;
 	case PIN_CONFIG_OUTPUT_ENABLE:
 		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT,
@@ -223,7 +209,7 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 		 *  does not have SMT control
 		 */
 		if (err != -ENOTSUPP)
-			goto err;
+			break;
 
 		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
 				       MTK_OUTPUT);
@@ -232,7 +218,7 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 		/* regard all non-zero value as enable */
 		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_IES, !!arg);
 		if (err)
-			goto err;
+			break;
 
 		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
 				       MTK_INPUT);
@@ -245,7 +231,7 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DO,
 				       arg);
 		if (err)
-			goto err;
+			break;
 
 		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
 				       MTK_OUTPUT);
@@ -257,15 +243,14 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 		 */
 		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR, !arg);
 		if (err)
-			goto err;
+			break;
 
 		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT, !!arg);
 		break;
 	case PIN_CONFIG_DRIVE_STRENGTH:
-		if (hw->soc->drive_set)
-			err = hw->soc->drive_set(hw, desc, arg);
-		else
-			err = -ENOTSUPP;
+		if (!hw->soc->drive_set)
+			break;
+		err = hw->soc->drive_set(hw, desc, arg);
 		break;
 	case MTK_PIN_CONFIG_TDSEL:
 	case MTK_PIN_CONFIG_RDSEL:
@@ -275,26 +260,19 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 		break;
 	case MTK_PIN_CONFIG_PU_ADV:
 	case MTK_PIN_CONFIG_PD_ADV:
-		if (hw->soc->adv_pull_set) {
-			bool pullup;
-
-			pullup = param == MTK_PIN_CONFIG_PU_ADV;
-			err = hw->soc->adv_pull_set(hw, desc, pullup,
-						    arg);
-		} else
-			err = -ENOTSUPP;
+		if (!hw->soc->adv_pull_set)
+			break;
+		err = hw->soc->adv_pull_set(hw, desc,
+					    (param == MTK_PIN_CONFIG_PU_ADV),
+					    arg);
 		break;
 	case MTK_PIN_CONFIG_DRV_ADV:
-		if (hw->soc->adv_drive_set)
-			err = hw->soc->adv_drive_set(hw, desc, arg);
-		else
-			err = -ENOTSUPP;
+		if (!hw->soc->adv_drive_set)
+			break;
+		err = hw->soc->adv_drive_set(hw, desc, arg);
 		break;
-	default:
-		err = -ENOTSUPP;
 	}
 
-err:
 	return err;
 }
 
-- 
2.43.0

[PATCH 5.15 014/168] pinctrl: mediatek: paris: Fix PIN_CONFIG_INPUT_SCHMITT_ENABLE readback

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chen-Yu Tsai <wenst@chromium.org>

[ Upstream commit 08f66a8edd08f6f7cfa769c81634b29a2b123908 ]

In the generic pin config library, readback of some options are handled
differently compared to the setting of those options: the argument value
is used to convey enable/disable of an option in the set path, but
success or -EINVAL is used to convey if an option is enabled or disabled
in the debugfs readback path.

PIN_CONFIG_INPUT_SCHMITT_ENABLE is one such option. Fix the readback of
the option in the mediatek-paris library, so that the debugfs dump is
not showing "input schmitt enabled" for pins that don't have it enabled.

Fixes: 1bea6afbc842 ("pinctrl: mediatek: Refine mtk_pinconf_get()")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <20240327091336.3434141-2-wenst@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/mediatek/pinctrl-paris.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index f17325a738eaa..9c2eaf8ce84a4 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -141,6 +141,8 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
 		}
 
 		err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SMT, &ret);
+		if (!ret)
+			err = -EINVAL;
 		break;
 	case PIN_CONFIG_DRIVE_STRENGTH:
 		if (!hw->soc->drive_get)
-- 
2.43.0

[PATCH 5.15 015/168] pinctrl: mediatek: paris: Rework support for PIN_CONFIG_{INPUT,OUTPUT}_ENABLE

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chen-Yu Tsai <wenst@chromium.org>

[ Upstream commit c5d3b64c568a344e998830e0e94a7c04e372f89b ]

There is a misinterpretation of some of the PIN_CONFIG_* options in this
driver library. PIN_CONFIG_OUTPUT_ENABLE should refer to a buffer or
switch in the output direction of the electrical path. The MediaTek
hardware does not have such a thing. The driver incorrectly maps this
option to the GPIO function's direction.

Likewise, PIN_CONFIG_INPUT_ENABLE should refer to a buffer or switch in
the input direction. The hardware does have such a mechanism, and is
mapped to the IES bit. The driver however sets the direction in addition
to the IES bit, which is incorrect. On readback, the IES bit isn't even
considered.

Ironically, the driver does not support readback for PIN_CONFIG_OUTPUT,
while its readback of PIN_CONFIG_{INPUT,OUTPUT}_ENABLE is what it should
be doing for PIN_CONFIG_OUTPUT.

Rework support for these three options, so that PIN_CONFIG_OUTPUT_ENABLE
is completely removed, PIN_CONFIG_INPUT_ENABLE is only linked to the IES
bit, and PIN_CONFIG_OUTPUT is linked to the GPIO function's direction
and output level.

Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <20240327091336.3434141-3-wenst@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/mediatek/pinctrl-paris.c | 38 +++++++-----------------
 1 file changed, 11 insertions(+), 27 deletions(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 9c2eaf8ce84a4..deade010270ac 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -113,20 +113,21 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
 		err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SR, &ret);
 		break;
 	case PIN_CONFIG_INPUT_ENABLE:
-	case PIN_CONFIG_OUTPUT_ENABLE:
+		err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_IES, &ret);
+		if (!ret)
+			err = -EINVAL;
+		break;
+	case PIN_CONFIG_OUTPUT:
 		err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &ret);
 		if (err)
 			break;
-		/*     CONFIG     Current direction return value
-		 * -------------  ----------------- ----------------------
-		 * OUTPUT_ENABLE       output       1 (= HW value)
-		 *                     input        0 (= HW value)
-		 * INPUT_ENABLE        output       0 (= reverse HW value)
-		 *                     input        1 (= reverse HW value)
-		 */
-		if (param == PIN_CONFIG_INPUT_ENABLE)
-			ret = !ret;
 
+		if (!ret) {
+			err = -EINVAL;
+			break;
+		}
+
+		err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DO, &ret);
 		break;
 	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
 		err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &ret);
@@ -204,26 +205,9 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 			break;
 		err = hw->soc->bias_set_combo(hw, desc, 0, arg);
 		break;
-	case PIN_CONFIG_OUTPUT_ENABLE:
-		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT,
-				       MTK_DISABLE);
-		/* Keep set direction to consider the case that a GPIO pin
-		 *  does not have SMT control
-		 */
-		if (err != -ENOTSUPP)
-			break;
-
-		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
-				       MTK_OUTPUT);
-		break;
 	case PIN_CONFIG_INPUT_ENABLE:
 		/* regard all non-zero value as enable */
 		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_IES, !!arg);
-		if (err)
-			break;
-
-		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
-				       MTK_INPUT);
 		break;
 	case PIN_CONFIG_SLEW_RATE:
 		/* regard all non-zero value as enable */
-- 
2.43.0

[PATCH 5.15 016/168] sunrpc: add a struct rpc_stats arg to rpc_create_args

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit 2057a48d0dd00c6a2a94ded7df2bf1d3f2a4a0da ]

We want to be able to have our rpc stats handled in a per network
namespace manner, so add an option to rpc_create_args to specify a
different rpc_stats struct instead of using the one on the rpc_program.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: 24457f1be29f ("nfs: Handle error of rpc_proc_register() in nfs_net_init().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/sunrpc/clnt.h | 1 +
 net/sunrpc/clnt.c           | 5 ++++-
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h
index 71ec22b1df860..9c5197c360b98 100644
--- a/include/linux/sunrpc/clnt.h
+++ b/include/linux/sunrpc/clnt.h
@@ -130,6 +130,7 @@ struct rpc_create_args {
 	const char		*servername;
 	const char		*nodename;
 	const struct rpc_program *program;
+	struct rpc_stat		*stats;
 	u32			prognumber;	/* overrides program->number */
 	u32			version;
 	rpc_authflavor_t	authflavor;
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index af1ca707c3d35..59fd6dedbbed2 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -398,7 +398,7 @@ static struct rpc_clnt * rpc_new_client(const struct rpc_create_args *args,
 	clnt->cl_maxproc  = version->nrprocs;
 	clnt->cl_prog     = args->prognumber ? : program->number;
 	clnt->cl_vers     = version->number;
-	clnt->cl_stats    = program->stats;
+	clnt->cl_stats    = args->stats ? : program->stats;
 	clnt->cl_metrics  = rpc_alloc_iostats(clnt);
 	rpc_init_pipe_dir_head(&clnt->cl_pipedir_objects);
 	err = -ENOMEM;
@@ -677,6 +677,7 @@ struct rpc_clnt *rpc_clone_client(struct rpc_clnt *clnt)
 		.version	= clnt->cl_vers,
 		.authflavor	= clnt->cl_auth->au_flavor,
 		.cred		= clnt->cl_cred,
+		.stats		= clnt->cl_stats,
 	};
 	return __rpc_clone_client(&args, clnt);
 }
@@ -699,6 +700,7 @@ rpc_clone_client_set_auth(struct rpc_clnt *clnt, rpc_authflavor_t flavor)
 		.version	= clnt->cl_vers,
 		.authflavor	= flavor,
 		.cred		= clnt->cl_cred,
+		.stats		= clnt->cl_stats,
 	};
 	return __rpc_clone_client(&args, clnt);
 }
@@ -979,6 +981,7 @@ struct rpc_clnt *rpc_bind_new_program(struct rpc_clnt *old,
 		.version	= vers,
 		.authflavor	= old->cl_auth->au_flavor,
 		.cred		= old->cl_cred,
+		.stats		= old->cl_stats,
 	};
 	struct rpc_clnt *clnt;
 	int err;
-- 
2.43.0

[PATCH 5.15 017/168] nfs: expose /proc/net/sunrpc/nfs in net namespaces

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit d47151b79e3220e72ae323b8b8e9d6da20dc884e ]

We're using nfs mounts inside of containers in production and noticed
that the nfs stats are not exposed in /proc.  This is a problem for us
as we use these stats for monitoring, and have to do this awkward bind
mount from the main host into the container in order to get to these
states.

Add the rpc_proc_register call to the pernet operations entry and exit
points so these stats can be exposed inside of network namespaces.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: 24457f1be29f ("nfs: Handle error of rpc_proc_register() in nfs_net_init().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/inode.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index d8f01d222c499..f5942b81213d6 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -2361,11 +2361,13 @@ EXPORT_SYMBOL_GPL(nfs_net_id);
 static int nfs_net_init(struct net *net)
 {
 	nfs_clients_init(net);
+	rpc_proc_register(net, &nfs_rpcstat);
 	return nfs_fs_proc_net_init(net);
 }
 
 static void nfs_net_exit(struct net *net)
 {
+	rpc_proc_unregister(net, "nfs");
 	nfs_fs_proc_net_exit(net);
 	nfs_clients_exit(net);
 }
@@ -2424,15 +2426,12 @@ static int __init init_nfs_fs(void)
 	if (err)
 		goto out1;
 
-	rpc_proc_register(&init_net, &nfs_rpcstat);
-
 	err = register_nfs_fs();
 	if (err)
 		goto out0;
 
 	return 0;
 out0:
-	rpc_proc_unregister(&init_net, "nfs");
 	nfs_destroy_directcache();
 out1:
 	nfs_destroy_writepagecache();
@@ -2465,7 +2464,6 @@ static void __exit exit_nfs_fs(void)
 	nfs_destroy_nfspagecache();
 	nfs_fscache_unregister();
 	unregister_pernet_subsys(&nfs_net_ops);
-	rpc_proc_unregister(&init_net, "nfs");
 	unregister_nfs_fs();
 	nfs_fs_proc_exit();
 	nfsiod_stop();
-- 
2.43.0

[PATCH 5.15 018/168] nfs: make the rpc_stat per net namespace

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit 1548036ef1204df65ca5a16e8b199c858cb80075 ]

Now that we're exposing the rpc stats on a per-network namespace basis,
move this struct into struct nfs_net and use that to make sure only the
per-network namespace stats are exposed.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: 24457f1be29f ("nfs: Handle error of rpc_proc_register() in nfs_net_init().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/client.c   | 5 ++++-
 fs/nfs/inode.c    | 4 +++-
 fs/nfs/internal.h | 2 --
 fs/nfs/netns.h    | 2 ++
 4 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index 090b16890e3d6..9e3a3570efc0f 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -73,7 +73,6 @@ const struct rpc_program nfs_program = {
 	.number			= NFS_PROGRAM,
 	.nrvers			= ARRAY_SIZE(nfs_version),
 	.version		= nfs_version,
-	.stats			= &nfs_rpcstat,
 	.pipe_dir_name		= NFS_PIPE_DIRNAME,
 };
 
@@ -500,6 +499,7 @@ int nfs_create_rpc_client(struct nfs_client *clp,
 			  const struct nfs_client_initdata *cl_init,
 			  rpc_authflavor_t flavor)
 {
+	struct nfs_net		*nn = net_generic(clp->cl_net, nfs_net_id);
 	struct rpc_clnt		*clnt = NULL;
 	struct rpc_create_args args = {
 		.net		= clp->cl_net,
@@ -511,6 +511,7 @@ int nfs_create_rpc_client(struct nfs_client *clp,
 		.servername	= clp->cl_hostname,
 		.nodename	= cl_init->nodename,
 		.program	= &nfs_program,
+		.stats		= &nn->rpcstats,
 		.version	= clp->rpc_ops->version,
 		.authflavor	= flavor,
 		.cred		= cl_init->cred,
@@ -1129,6 +1130,8 @@ void nfs_clients_init(struct net *net)
 #endif
 	spin_lock_init(&nn->nfs_client_lock);
 	nn->boot_time = ktime_get_real();
+	memset(&nn->rpcstats, 0, sizeof(nn->rpcstats));
+	nn->rpcstats.program = &nfs_program;
 
 	nfs_netns_sysfs_setup(nn, net);
 }
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index f5942b81213d6..c3d961f9b4e15 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -2360,8 +2360,10 @@ EXPORT_SYMBOL_GPL(nfs_net_id);
 
 static int nfs_net_init(struct net *net)
 {
+	struct nfs_net *nn = net_generic(net, nfs_net_id);
+
 	nfs_clients_init(net);
-	rpc_proc_register(net, &nfs_rpcstat);
+	rpc_proc_register(net, &nn->rpcstats);
 	return nfs_fs_proc_net_init(net);
 }
 
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index 2ceb4b98ec15f..d0965b4676a5b 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -428,8 +428,6 @@ int nfs_try_get_tree(struct fs_context *);
 int nfs_get_tree_common(struct fs_context *);
 void nfs_kill_super(struct super_block *);
 
-extern struct rpc_stat nfs_rpcstat;
-
 extern int __init register_nfs_fs(void);
 extern void __exit unregister_nfs_fs(void);
 extern bool nfs_sb_active(struct super_block *sb);
diff --git a/fs/nfs/netns.h b/fs/nfs/netns.h
index c8374f74dce11..a68b21603ea9a 100644
--- a/fs/nfs/netns.h
+++ b/fs/nfs/netns.h
@@ -9,6 +9,7 @@
 #include <linux/nfs4.h>
 #include <net/net_namespace.h>
 #include <net/netns/generic.h>
+#include <linux/sunrpc/stats.h>
 
 struct bl_dev_msg {
 	int32_t status;
@@ -34,6 +35,7 @@ struct nfs_net {
 	struct nfs_netns_client *nfs_client;
 	spinlock_t nfs_client_lock;
 	ktime_t boot_time;
+	struct rpc_stat rpcstats;
 #ifdef CONFIG_PROC_FS
 	struct proc_dir_entry *proc_nfsfs;
 #endif
-- 
2.43.0

[PATCH 5.15 019/168] nfs: Handle error of rpc_proc_register() in nfs_net_init().

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 24457f1be29f1e7042e50a7749f5c2dde8c433c8 ]

syzkaller reported a warning [0] triggered while destroying immature
netns.

rpc_proc_register() was called in init_nfs_fs(), but its error
has been ignored since at least the initial commit 1da177e4c3f4
("Linux-2.6.12-rc2").

Recently, commit d47151b79e32 ("nfs: expose /proc/net/sunrpc/nfs
in net namespaces") converted the procfs to per-netns and made
the problem more visible.

Even when rpc_proc_register() fails, nfs_net_init() could succeed,
and thus nfs_net_exit() will be called while destroying the netns.

Then, remove_proc_entry() will be called for non-existing proc
directory and trigger the warning below.

Let's handle the error of rpc_proc_register() properly in nfs_net_init().

[0]:
name 'nfs'
WARNING: CPU: 1 PID: 1710 at fs/proc/generic.c:711 remove_proc_entry+0x1bb/0x2d0 fs/proc/generic.c:711
Modules linked in:
CPU: 1 PID: 1710 Comm: syz-executor.2 Not tainted 6.8.0-12822-gcd51db110a7e #12
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:remove_proc_entry+0x1bb/0x2d0 fs/proc/generic.c:711
Code: 41 5d 41 5e c3 e8 85 09 b5 ff 48 c7 c7 88 58 64 86 e8 09 0e 71 02 e8 74 09 b5 ff 4c 89 e6 48 c7 c7 de 1b 80 84 e8 c5 ad 97 ff <0f> 0b eb b1 e8 5c 09 b5 ff 48 c7 c7 88 58 64 86 e8 e0 0d 71 02 eb
RSP: 0018:ffffc9000c6d7ce0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff8880422b8b00 RCX: ffffffff8110503c
RDX: ffff888030652f00 RSI: ffffffff81105045 RDI: 0000000000000001
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: ffffffff81bb62cb R12: ffffffff84807ffc
R13: ffff88804ad6fcc0 R14: ffffffff84807ffc R15: ffffffff85741ff8
FS:  00007f30cfba8640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ff51afe8000 CR3: 000000005a60a005 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <TASK>
 rpc_proc_unregister+0x64/0x70 net/sunrpc/stats.c:310
 nfs_net_exit+0x1c/0x30 fs/nfs/inode.c:2438
 ops_exit_list+0x62/0xb0 net/core/net_namespace.c:170
 setup_net+0x46c/0x660 net/core/net_namespace.c:372
 copy_net_ns+0x244/0x590 net/core/net_namespace.c:505
 create_new_namespaces+0x2ed/0x770 kernel/nsproxy.c:110
 unshare_nsproxy_namespaces+0xae/0x160 kernel/nsproxy.c:228
 ksys_unshare+0x342/0x760 kernel/fork.c:3322
 __do_sys_unshare kernel/fork.c:3393 [inline]
 __se_sys_unshare kernel/fork.c:3391 [inline]
 __x64_sys_unshare+0x1f/0x30 kernel/fork.c:3391
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x46/0x4e
RIP: 0033:0x7f30d0febe5d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007f30cfba7cc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000110
RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007f30d0febe5d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000006c020600
RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002
R13: 000000000000000b R14: 00007f30d104c530 R15: 0000000000000000
 </TASK>

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/inode.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index c3d961f9b4e15..48ade92d4ce8c 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -2363,7 +2363,12 @@ static int nfs_net_init(struct net *net)
 	struct nfs_net *nn = net_generic(net, nfs_net_id);
 
 	nfs_clients_init(net);
-	rpc_proc_register(net, &nn->rpcstats);
+
+	if (!rpc_proc_register(net, &nn->rpcstats)) {
+		nfs_clients_exit(net);
+		return -ENOMEM;
+	}
+
 	return nfs_fs_proc_net_init(net);
 }
 
-- 
2.43.0

[PATCH 5.15 020/168] power: rt9455: hide unused rt9455_boost_voltage_values

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 452d8950db3e839aba1bb13bc5378f4bac11fa04 ]

The rt9455_boost_voltage_values[] array is only used when USB PHY
support is enabled, causing a W=1 warning otherwise:

drivers/power/supply/rt9455_charger.c:200:18: error: 'rt9455_boost_voltage_values' defined but not used [-Werror=unused-const-variable=]

Enclose the definition in the same #ifdef as the references to it.

Fixes: e86d69dd786e ("power_supply: Add support for Richtek RT9455 battery charger")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240403080702.3509288-10-arnd@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/rt9455_charger.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/power/supply/rt9455_charger.c b/drivers/power/supply/rt9455_charger.c
index 594bb3b8a4d1e..a84afccd509f1 100644
--- a/drivers/power/supply/rt9455_charger.c
+++ b/drivers/power/supply/rt9455_charger.c
@@ -193,6 +193,7 @@ static const int rt9455_voreg_values[] = {
 	4450000, 4450000, 4450000, 4450000, 4450000, 4450000, 4450000, 4450000
 };
 
+#if IS_ENABLED(CONFIG_USB_PHY)
 /*
  * When the charger is in boost mode, REG02[7:2] represent boost output
  * voltage.
@@ -208,6 +209,7 @@ static const int rt9455_boost_voltage_values[] = {
 	5600000, 5600000, 5600000, 5600000, 5600000, 5600000, 5600000, 5600000,
 	5600000, 5600000, 5600000, 5600000, 5600000, 5600000, 5600000, 5600000,
 };
+#endif
 
 /* REG07[3:0] (VMREG) in uV */
 static const int rt9455_vmreg_values[] = {
-- 
2.43.0

[PATCH 5.15 021/168] power: supply: mt6360_charger: Fix of_match for usb-otg-vbus regulator

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

[ Upstream commit 1e0fb113646182e073539db96016b00cfeb18ecc ]

The of_match shall correspond to the name of the regulator subnode,
or the deprecated `regulator-compatible` property must be used:
failing to do so, the regulator won't probe (and the driver will
as well not probe).

Since the devicetree binding for this driver is actually correct
and wants DTs to use the "usb-otg-vbus-regulator" subnode name,
fix this driver by aligning the `of_match` string to what the DT
binding wants.

Fixes: 0402e8ebb8b8 ("power: supply: mt6360_charger: add MT6360 charger support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240410084405.1389378-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/mt6360_charger.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/power/supply/mt6360_charger.c b/drivers/power/supply/mt6360_charger.c
index f1248faf59058..383bf19819dfb 100644
--- a/drivers/power/supply/mt6360_charger.c
+++ b/drivers/power/supply/mt6360_charger.c
@@ -591,7 +591,7 @@ static const struct regulator_ops mt6360_chg_otg_ops = {
 };
 
 static const struct regulator_desc mt6360_otg_rdesc = {
-	.of_match = "usb-otg-vbus",
+	.of_match = "usb-otg-vbus-regulator",
 	.name = "usb-otg-vbus",
 	.ops = &mt6360_chg_otg_ops,
 	.owner = THIS_MODULE,
-- 
2.43.0

[PATCH 5.15 022/168] pinctrl: devicetree: fix refcount leak in pinctrl_dt_to_map()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zeng Heng <zengheng4@huawei.com>

[ Upstream commit a0cedbcc8852d6c77b00634b81e41f17f29d9404 ]

If we fail to allocate propname buffer, we need to drop the reference
count we just took. Because the pinctrl_dt_free_maps() includes the
droping operation, here we call it directly.

Fixes: 91d5c5060ee2 ("pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <20240415105328.3651441-1-zengheng4@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/devicetree.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/devicetree.c b/drivers/pinctrl/devicetree.c
index eac55fee5281c..0220228c50404 100644
--- a/drivers/pinctrl/devicetree.c
+++ b/drivers/pinctrl/devicetree.c
@@ -220,14 +220,16 @@ int pinctrl_dt_to_map(struct pinctrl *p, struct pinctrl_dev *pctldev)
 	for (state = 0; ; state++) {
 		/* Retrieve the pinctrl-* property */
 		propname = kasprintf(GFP_KERNEL, "pinctrl-%d", state);
-		if (!propname)
-			return -ENOMEM;
+		if (!propname) {
+			ret = -ENOMEM;
+			goto err;
+		}
 		prop = of_find_property(np, propname, &size);
 		kfree(propname);
 		if (!prop) {
 			if (state == 0) {
-				of_node_put(np);
-				return -ENODEV;
+				ret = -ENODEV;
+				goto err;
 			}
 			break;
 		}
-- 
2.43.0

[PATCH 5.15 023/168] regulator: mt6360: De-capitalize devicetree regulator subnodes

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

[ Upstream commit d3cf8a17498dd9104c04ad28eeac3ef3339f9f9f ]

The MT6360 regulator binding, the example in the MT6360 mfd binding, and
the devicetree users of those bindings are rightfully declaring MT6360
regulator subnodes with non-capital names, and luckily without using the
deprecated regulator-compatible property.

With this driver declaring capitalized BUCKx/LDOx as of_match string for
the node names, obviously no regulator gets probed: fix that by changing
the MT6360_REGULATOR_DESC macro to add a "match" parameter which gets
assigned to the of_match.

Fixes: d321571d5e4c ("regulator: mt6360: Add support for MT6360 regulator")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20240409144438.410060-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/mt6360-regulator.c | 32 +++++++++++++++++-----------
 1 file changed, 20 insertions(+), 12 deletions(-)

diff --git a/drivers/regulator/mt6360-regulator.c b/drivers/regulator/mt6360-regulator.c
index 4d34be94d1663..fc464a4450dc5 100644
--- a/drivers/regulator/mt6360-regulator.c
+++ b/drivers/regulator/mt6360-regulator.c
@@ -319,15 +319,15 @@ static unsigned int mt6360_regulator_of_map_mode(unsigned int hw_mode)
 	}
 }
 
-#define MT6360_REGULATOR_DESC(_name, _sname, ereg, emask, vreg,	vmask,	\
-			      mreg, mmask, streg, stmask, vranges,	\
-			      vcnts, offon_delay, irq_tbls)		\
+#define MT6360_REGULATOR_DESC(match, _name, _sname, ereg, emask, vreg,	\
+			      vmask, mreg, mmask, streg, stmask,	\
+			      vranges, vcnts, offon_delay, irq_tbls)	\
 {									\
 	.desc = {							\
 		.name = #_name,						\
 		.supply_name = #_sname,					\
 		.id =  MT6360_REGULATOR_##_name,			\
-		.of_match = of_match_ptr(#_name),			\
+		.of_match = of_match_ptr(match),			\
 		.regulators_node = of_match_ptr("regulator"),		\
 		.of_map_mode = mt6360_regulator_of_map_mode,		\
 		.owner = THIS_MODULE,					\
@@ -351,21 +351,29 @@ static unsigned int mt6360_regulator_of_map_mode(unsigned int hw_mode)
 }
 
 static const struct mt6360_regulator_desc mt6360_regulator_descs[] =  {
-	MT6360_REGULATOR_DESC(BUCK1, BUCK1_VIN, 0x117, 0x40, 0x110, 0xff, 0x117, 0x30, 0x117, 0x04,
+	MT6360_REGULATOR_DESC("buck1", BUCK1, BUCK1_VIN,
+			      0x117, 0x40, 0x110, 0xff, 0x117, 0x30, 0x117, 0x04,
 			      buck_vout_ranges, 256, 0, buck1_irq_tbls),
-	MT6360_REGULATOR_DESC(BUCK2, BUCK2_VIN, 0x127, 0x40, 0x120, 0xff, 0x127, 0x30, 0x127, 0x04,
+	MT6360_REGULATOR_DESC("buck2", BUCK2, BUCK2_VIN,
+			      0x127, 0x40, 0x120, 0xff, 0x127, 0x30, 0x127, 0x04,
 			      buck_vout_ranges, 256, 0, buck2_irq_tbls),
-	MT6360_REGULATOR_DESC(LDO6, LDO_VIN3, 0x137, 0x40, 0x13B, 0xff, 0x137, 0x30, 0x137, 0x04,
+	MT6360_REGULATOR_DESC("ldo6", LDO6, LDO_VIN3,
+			      0x137, 0x40, 0x13B, 0xff, 0x137, 0x30, 0x137, 0x04,
 			      ldo_vout_ranges1, 256, 0, ldo6_irq_tbls),
-	MT6360_REGULATOR_DESC(LDO7, LDO_VIN3, 0x131, 0x40, 0x135, 0xff, 0x131, 0x30, 0x131, 0x04,
+	MT6360_REGULATOR_DESC("ldo7", LDO7, LDO_VIN3,
+			      0x131, 0x40, 0x135, 0xff, 0x131, 0x30, 0x131, 0x04,
 			      ldo_vout_ranges1, 256, 0, ldo7_irq_tbls),
-	MT6360_REGULATOR_DESC(LDO1, LDO_VIN1, 0x217, 0x40, 0x21B, 0xff, 0x217, 0x30, 0x217, 0x04,
+	MT6360_REGULATOR_DESC("ldo1", LDO1, LDO_VIN1,
+			      0x217, 0x40, 0x21B, 0xff, 0x217, 0x30, 0x217, 0x04,
 			      ldo_vout_ranges2, 256, 0, ldo1_irq_tbls),
-	MT6360_REGULATOR_DESC(LDO2, LDO_VIN1, 0x211, 0x40, 0x215, 0xff, 0x211, 0x30, 0x211, 0x04,
+	MT6360_REGULATOR_DESC("ldo2", LDO2, LDO_VIN1,
+			      0x211, 0x40, 0x215, 0xff, 0x211, 0x30, 0x211, 0x04,
 			      ldo_vout_ranges2, 256, 0, ldo2_irq_tbls),
-	MT6360_REGULATOR_DESC(LDO3, LDO_VIN1, 0x205, 0x40, 0x209, 0xff, 0x205, 0x30, 0x205, 0x04,
+	MT6360_REGULATOR_DESC("ldo3", LDO3, LDO_VIN1,
+			      0x205, 0x40, 0x209, 0xff, 0x205, 0x30, 0x205, 0x04,
 			      ldo_vout_ranges2, 256, 100, ldo3_irq_tbls),
-	MT6360_REGULATOR_DESC(LDO5, LDO_VIN2, 0x20B, 0x40, 0x20F, 0x7f, 0x20B, 0x30, 0x20B, 0x04,
+	MT6360_REGULATOR_DESC("ldo5", LDO5, LDO_VIN2,
+			      0x20B, 0x40, 0x20F, 0x7f, 0x20B, 0x30, 0x20B, 0x04,
 			      ldo_vout_ranges3, 128, 100, ldo5_irq_tbls),
 };
 
-- 
2.43.0

[PATCH 5.15 024/168] bpf, kconfig: Fix DEBUG_INFO_BTF_MODULES Kconfig definition

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrii Nakryiko <andrii@kernel.org>

[ Upstream commit 229087f6f1dc2d0c38feba805770f28529980ec0 ]

Turns out that due to CONFIG_DEBUG_INFO_BTF_MODULES not having an
explicitly specified "menu item name" in Kconfig, it's basically
impossible to turn it off (see [0]).

This patch fixes the issue by defining menu name for
CONFIG_DEBUG_INFO_BTF_MODULES, which makes it actually adjustable
and independent of CONFIG_DEBUG_INFO_BTF, in the sense that one can
have DEBUG_INFO_BTF=y and DEBUG_INFO_BTF_MODULES=n.

We still keep it as defaulting to Y, of course.

Fixes: 5f9ae91f7c0d ("kbuild: Build kernel module BTFs if BTF is enabled and pahole supports it")
Reported-by: Vincent Li <vincent.mc.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/CAK3+h2xiFfzQ9UXf56nrRRP=p1+iUxGoEP5B+aq9MDT5jLXDSg@mail.gmail.com [0]
Link: https://lore.kernel.org/bpf/20240404220344.3879270-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/Kconfig.debug | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 28faea9b5da62..2025b624fbb67 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -319,7 +319,7 @@ config DEBUG_INFO_DWARF5
 endchoice # "DWARF version"
 
 config DEBUG_INFO_BTF
-	bool "Generate BTF typeinfo"
+	bool "Generate BTF type information"
 	depends on !DEBUG_INFO_SPLIT && !DEBUG_INFO_REDUCED
 	depends on !GCC_PLUGIN_RANDSTRUCT || COMPILE_TEST
 	help
@@ -331,7 +331,8 @@ config PAHOLE_HAS_SPLIT_BTF
 	def_bool PAHOLE_VERSION >= 119
 
 config DEBUG_INFO_BTF_MODULES
-	def_bool y
+	bool "Generate BTF type information for kernel modules"
+	default y
 	depends on DEBUG_INFO_BTF && MODULES && PAHOLE_HAS_SPLIT_BTF
 	help
 	  Generate compact split BTF type information for kernel modules.
-- 
2.43.0

[PATCH 5.15 025/168] bpf, skmsg: Fix NULL pointer dereference in sk_psock_skb_ingress_enqueue

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Xing <kernelxing@tencent.com>

[ Upstream commit 6648e613226e18897231ab5e42ffc29e63fa3365 ]

Fix NULL pointer data-races in sk_psock_skb_ingress_enqueue() which
syzbot reported [1].

[1]
BUG: KCSAN: data-race in sk_psock_drop / sk_psock_skb_ingress_enqueue

write to 0xffff88814b3278b8 of 8 bytes by task 10724 on cpu 1:
 sk_psock_stop_verdict net/core/skmsg.c:1257 [inline]
 sk_psock_drop+0x13e/0x1f0 net/core/skmsg.c:843
 sk_psock_put include/linux/skmsg.h:459 [inline]
 sock_map_close+0x1a7/0x260 net/core/sock_map.c:1648
 unix_release+0x4b/0x80 net/unix/af_unix.c:1048
 __sock_release net/socket.c:659 [inline]
 sock_close+0x68/0x150 net/socket.c:1421
 __fput+0x2c1/0x660 fs/file_table.c:422
 __fput_sync+0x44/0x60 fs/file_table.c:507
 __do_sys_close fs/open.c:1556 [inline]
 __se_sys_close+0x101/0x1b0 fs/open.c:1541
 __x64_sys_close+0x1f/0x30 fs/open.c:1541
 do_syscall_64+0xd3/0x1d0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

read to 0xffff88814b3278b8 of 8 bytes by task 10713 on cpu 0:
 sk_psock_data_ready include/linux/skmsg.h:464 [inline]
 sk_psock_skb_ingress_enqueue+0x32d/0x390 net/core/skmsg.c:555
 sk_psock_skb_ingress_self+0x185/0x1e0 net/core/skmsg.c:606
 sk_psock_verdict_apply net/core/skmsg.c:1008 [inline]
 sk_psock_verdict_recv+0x3e4/0x4a0 net/core/skmsg.c:1202
 unix_read_skb net/unix/af_unix.c:2546 [inline]
 unix_stream_read_skb+0x9e/0xf0 net/unix/af_unix.c:2682
 sk_psock_verdict_data_ready+0x77/0x220 net/core/skmsg.c:1223
 unix_stream_sendmsg+0x527/0x860 net/unix/af_unix.c:2339
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg+0x140/0x180 net/socket.c:745
 ____sys_sendmsg+0x312/0x410 net/socket.c:2584
 ___sys_sendmsg net/socket.c:2638 [inline]
 __sys_sendmsg+0x1e9/0x280 net/socket.c:2667
 __do_sys_sendmsg net/socket.c:2676 [inline]
 __se_sys_sendmsg net/socket.c:2674 [inline]
 __x64_sys_sendmsg+0x46/0x50 net/socket.c:2674
 do_syscall_64+0xd3/0x1d0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

value changed: 0xffffffff83d7feb0 -> 0x0000000000000000

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 10713 Comm: syz-executor.4 Tainted: G        W          6.8.0-syzkaller-08951-gfe46a7dd189e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024

Prior to this, commit 4cd12c6065df ("bpf, sockmap: Fix NULL pointer
dereference in sk_psock_verdict_data_ready()") fixed one NULL pointer
similarly due to no protection of saved_data_ready. Here is another
different caller causing the same issue because of the same reason. So
we should protect it with sk_callback_lock read lock because the writer
side in the sk_psock_drop() uses "write_lock_bh(&sk->sk_callback_lock);".

To avoid errors that could happen in future, I move those two pairs of
lock into the sk_psock_data_ready(), which is suggested by John Fastabend.

Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Reported-by: syzbot+aa8c8ec2538929f18f2d@syzkaller.appspotmail.com
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=aa8c8ec2538929f18f2d
Link: https://lore.kernel.org/all/20240329134037.92124-1-kerneljasonxing@gmail.com
Link: https://lore.kernel.org/bpf/20240404021001.94815-1-kerneljasonxing@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/skmsg.h |    2 ++
 1 file changed, 2 insertions(+)

--- a/include/linux/skmsg.h
+++ b/include/linux/skmsg.h
@@ -462,10 +462,12 @@ static inline void sk_psock_put(struct s
 
 static inline void sk_psock_data_ready(struct sock *sk, struct sk_psock *psock)
 {
+	read_lock_bh(&sk->sk_callback_lock);
 	if (psock->saved_data_ready)
 		psock->saved_data_ready(sk);
 	else
 		sk->sk_data_ready(sk);
+	read_unlock_bh(&sk->sk_callback_lock);
 }
 
 static inline void psock_set_prog(struct bpf_prog **pprog,

[PATCH 5.15 026/168] bpf: Fix a verifier verbose message

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anton Protopopov <aspsk@isovalent.com>

[ Upstream commit 37eacb9f6e89fb399a79e952bc9c78eb3e16290e ]

Long ago a map file descriptor in a pseudo ldimm64 instruction could
only be present as an immediate value insn[0].imm, and thus this value
was used in a verbose verifier message printed when the file descriptor
wasn't valid. Since addition of BPF_PSEUDO_MAP_IDX_VALUE/BPF_PSEUDO_MAP_IDX
the insn[0].imm field can also contain an index pointing to the file
descriptor in the attr.fd_array array. However, if the file descriptor
is invalid, the verifier still prints the verbose message containing
value of insn[0].imm. Patch the verifier message to always print the
actual file descriptor value.

Fixes: 387544bfa291 ("bpf: Introduce fd_idx")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240412141100.3562942-1-aspsk@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/verifier.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 67b3254270221..94d952967fbf9 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -11875,8 +11875,7 @@ static int resolve_pseudo_ldimm64(struct bpf_verifier_env *env)
 			f = fdget(fd);
 			map = __bpf_map_get(f);
 			if (IS_ERR(map)) {
-				verbose(env, "fd %d is not pointing to valid bpf_map\n",
-					insn[0].imm);
+				verbose(env, "fd %d is not pointing to valid bpf_map\n", fd);
 				return PTR_ERR(map);
 			}
 
-- 
2.43.0

[PATCH 5.15 027/168] spi: hisi-kunpeng: Delete the dump interface of data registers in debugfs

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Devyn Liu <liudingyuan@huawei.com>

[ Upstream commit 7430764f5a85d30314aeef2d5438dff1fb0b1d68 ]

Due to the reading of FIFO during the dump of data registers in
debugfs, if SPI transmission is in progress, it will be affected
and may result in transmission failure. Therefore, the dump
interface of data registers in debugfs is removed.

Fixes: 2b2142f247eb ("spi: hisi-kunpeng: Add debugfs support")
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Reviewed-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/20240416015839.3323398-1-liudingyuan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-hisi-kunpeng.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/spi/spi-hisi-kunpeng.c b/drivers/spi/spi-hisi-kunpeng.c
index 525cc0143a305..54730e93fba45 100644
--- a/drivers/spi/spi-hisi-kunpeng.c
+++ b/drivers/spi/spi-hisi-kunpeng.c
@@ -151,8 +151,6 @@ static const struct debugfs_reg32 hisi_spi_regs[] = {
 	HISI_SPI_DBGFS_REG("ENR", HISI_SPI_ENR),
 	HISI_SPI_DBGFS_REG("FIFOC", HISI_SPI_FIFOC),
 	HISI_SPI_DBGFS_REG("IMR", HISI_SPI_IMR),
-	HISI_SPI_DBGFS_REG("DIN", HISI_SPI_DIN),
-	HISI_SPI_DBGFS_REG("DOUT", HISI_SPI_DOUT),
 	HISI_SPI_DBGFS_REG("SR", HISI_SPI_SR),
 	HISI_SPI_DBGFS_REG("RISR", HISI_SPI_RISR),
 	HISI_SPI_DBGFS_REG("ISR", HISI_SPI_ISR),
-- 
2.43.0

[PATCH 5.15 028/168] s390/mm: Fix storage key clearing for guest huge pages

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Claudio Imbrenda <imbrenda@linux.ibm.com>

[ Upstream commit 843c3280686fc1a83d89ee1e0b5599c9f6b09d0c ]

The function __storage_key_init_range() expects the end address to be
the first byte outside the range to be initialized. I.e. end - start
should be the size of the area to be initialized.

The current code works because __storage_key_init_range() will still loop
over every page in the range, but it is slower than using sske_frame().

Fixes: 964c2c05c9f3 ("s390/mm: Clear huge page storage keys on enable_skey")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20240416114220.28489-2-imbrenda@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/mm/gmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/s390/mm/gmap.c b/arch/s390/mm/gmap.c
index a2c872de29a66..32d9db5e6f53c 100644
--- a/arch/s390/mm/gmap.c
+++ b/arch/s390/mm/gmap.c
@@ -2632,7 +2632,7 @@ static int __s390_enable_skey_hugetlb(pte_t *pte, unsigned long addr,
 		return 0;
 
 	start = pmd_val(*pmd) & HPAGE_MASK;
-	end = start + HPAGE_SIZE - 1;
+	end = start + HPAGE_SIZE;
 	__storage_key_init_range(start, end);
 	set_bit(PG_arch_1, &page->flags);
 	cond_resched();
-- 
2.43.0

[PATCH 5.15 029/168] s390/mm: Fix clearing storage keys for huge pages

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Claudio Imbrenda <imbrenda@linux.ibm.com>

[ Upstream commit 412050af2ea39407fe43324b0be4ab641530ce88 ]

The function __storage_key_init_range() expects the end address to be
the first byte outside the range to be initialized. I.e. end - start
should be the size of the area to be initialized.

The current code works because __storage_key_init_range() will still loop
over every page in the range, but it is slower than using sske_frame().

Fixes: 3afdfca69870 ("s390/mm: Clear skeys for newly mapped huge guest pmds")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20240416114220.28489-3-imbrenda@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/mm/hugetlbpage.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c
index da36d13ffc162..8631307d3defc 100644
--- a/arch/s390/mm/hugetlbpage.c
+++ b/arch/s390/mm/hugetlbpage.c
@@ -146,7 +146,7 @@ static void clear_huge_pte_skeys(struct mm_struct *mm, unsigned long rste)
 	}
 
 	if (!test_and_set_bit(PG_arch_1, &page->flags))
-		__storage_key_init_range(paddr, paddr + size - 1);
+		__storage_key_init_range(paddr, paddr + size);
 }
 
 void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
-- 
2.43.0

[PATCH 5.15 030/168] xdp: Move conversion to xdp_frame out of map functions

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit d53ad5d8b218a885e95080d4d3d556b16b91b1b9 ]

All map redirect functions except XSK maps convert xdp_buff to xdp_frame
before enqueueing it. So move this conversion of out the map functions
and into xdp_do_redirect(). This removes a bit of duplicated code, but more
importantly it makes it possible to support caller-allocated xdp_frame
structures, which will be added in a subsequent commit.

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220103150812.87914-5-toke@redhat.com
Stable-dep-of: 5bcf0dcbf906 ("xdp: use flags field to disambiguate broadcast redirect")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/bpf.h | 20 ++++++++++----------
 kernel/bpf/cpumap.c |  8 +-------
 kernel/bpf/devmap.c | 32 +++++++++++---------------------
 net/core/filter.c   | 24 +++++++++++++++++-------
 4 files changed, 39 insertions(+), 45 deletions(-)

diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index 74a26cabc084e..4236de05a8e70 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -1651,17 +1651,17 @@ void bpf_patch_call_args(struct bpf_insn *insn, u32 stack_depth);
 struct btf *bpf_get_btf_vmlinux(void);
 
 /* Map specifics */
-struct xdp_buff;
+struct xdp_frame;
 struct sk_buff;
 struct bpf_dtab_netdev;
 struct bpf_cpu_map_entry;
 
 void __dev_flush(void);
-int dev_xdp_enqueue(struct net_device *dev, struct xdp_buff *xdp,
+int dev_xdp_enqueue(struct net_device *dev, struct xdp_frame *xdpf,
 		    struct net_device *dev_rx);
-int dev_map_enqueue(struct bpf_dtab_netdev *dst, struct xdp_buff *xdp,
+int dev_map_enqueue(struct bpf_dtab_netdev *dst, struct xdp_frame *xdpf,
 		    struct net_device *dev_rx);
-int dev_map_enqueue_multi(struct xdp_buff *xdp, struct net_device *dev_rx,
+int dev_map_enqueue_multi(struct xdp_frame *xdpf, struct net_device *dev_rx,
 			  struct bpf_map *map, bool exclude_ingress);
 int dev_map_generic_redirect(struct bpf_dtab_netdev *dst, struct sk_buff *skb,
 			     struct bpf_prog *xdp_prog);
@@ -1670,7 +1670,7 @@ int dev_map_redirect_multi(struct net_device *dev, struct sk_buff *skb,
 			   bool exclude_ingress);
 
 void __cpu_map_flush(void);
-int cpu_map_enqueue(struct bpf_cpu_map_entry *rcpu, struct xdp_buff *xdp,
+int cpu_map_enqueue(struct bpf_cpu_map_entry *rcpu, struct xdp_frame *xdpf,
 		    struct net_device *dev_rx);
 int cpu_map_generic_redirect(struct bpf_cpu_map_entry *rcpu,
 			     struct sk_buff *skb);
@@ -1823,26 +1823,26 @@ static inline void __dev_flush(void)
 {
 }
 
-struct xdp_buff;
+struct xdp_frame;
 struct bpf_dtab_netdev;
 struct bpf_cpu_map_entry;
 
 static inline
-int dev_xdp_enqueue(struct net_device *dev, struct xdp_buff *xdp,
+int dev_xdp_enqueue(struct net_device *dev, struct xdp_frame *xdpf,
 		    struct net_device *dev_rx)
 {
 	return 0;
 }
 
 static inline
-int dev_map_enqueue(struct bpf_dtab_netdev *dst, struct xdp_buff *xdp,
+int dev_map_enqueue(struct bpf_dtab_netdev *dst, struct xdp_frame *xdpf,
 		    struct net_device *dev_rx)
 {
 	return 0;
 }
 
 static inline
-int dev_map_enqueue_multi(struct xdp_buff *xdp, struct net_device *dev_rx,
+int dev_map_enqueue_multi(struct xdp_frame *xdpf, struct net_device *dev_rx,
 			  struct bpf_map *map, bool exclude_ingress)
 {
 	return 0;
@@ -1870,7 +1870,7 @@ static inline void __cpu_map_flush(void)
 }
 
 static inline int cpu_map_enqueue(struct bpf_cpu_map_entry *rcpu,
-				  struct xdp_buff *xdp,
+				  struct xdp_frame *xdpf,
 				  struct net_device *dev_rx)
 {
 	return 0;
diff --git a/kernel/bpf/cpumap.c b/kernel/bpf/cpumap.c
index a8429cfb4ae8c..0848d5691fd15 100644
--- a/kernel/bpf/cpumap.c
+++ b/kernel/bpf/cpumap.c
@@ -764,15 +764,9 @@ static void bq_enqueue(struct bpf_cpu_map_entry *rcpu, struct xdp_frame *xdpf)
 		list_add(&bq->flush_node, flush_list);
 }
 
-int cpu_map_enqueue(struct bpf_cpu_map_entry *rcpu, struct xdp_buff *xdp,
+int cpu_map_enqueue(struct bpf_cpu_map_entry *rcpu, struct xdp_frame *xdpf,
 		    struct net_device *dev_rx)
 {
-	struct xdp_frame *xdpf;
-
-	xdpf = xdp_convert_buff_to_frame(xdp);
-	if (unlikely(!xdpf))
-		return -EOVERFLOW;
-
 	/* Info needed when constructing SKB on remote CPU */
 	xdpf->dev_rx = dev_rx;
 
diff --git a/kernel/bpf/devmap.c b/kernel/bpf/devmap.c
index b591073c5f83d..bbf3ec03aa591 100644
--- a/kernel/bpf/devmap.c
+++ b/kernel/bpf/devmap.c
@@ -468,24 +468,19 @@ static void bq_enqueue(struct net_device *dev, struct xdp_frame *xdpf,
 	bq->q[bq->count++] = xdpf;
 }
 
-static inline int __xdp_enqueue(struct net_device *dev, struct xdp_buff *xdp,
+static inline int __xdp_enqueue(struct net_device *dev, struct xdp_frame *xdpf,
 				struct net_device *dev_rx,
 				struct bpf_prog *xdp_prog)
 {
-	struct xdp_frame *xdpf;
 	int err;
 
 	if (!dev->netdev_ops->ndo_xdp_xmit)
 		return -EOPNOTSUPP;
 
-	err = xdp_ok_fwd_dev(dev, xdp->data_end - xdp->data);
+	err = xdp_ok_fwd_dev(dev, xdpf->len);
 	if (unlikely(err))
 		return err;
 
-	xdpf = xdp_convert_buff_to_frame(xdp);
-	if (unlikely(!xdpf))
-		return -EOVERFLOW;
-
 	bq_enqueue(dev, xdpf, dev_rx, xdp_prog);
 	return 0;
 }
@@ -521,27 +516,27 @@ static u32 dev_map_bpf_prog_run_skb(struct sk_buff *skb, struct bpf_dtab_netdev
 	return act;
 }
 
-int dev_xdp_enqueue(struct net_device *dev, struct xdp_buff *xdp,
+int dev_xdp_enqueue(struct net_device *dev, struct xdp_frame *xdpf,
 		    struct net_device *dev_rx)
 {
-	return __xdp_enqueue(dev, xdp, dev_rx, NULL);
+	return __xdp_enqueue(dev, xdpf, dev_rx, NULL);
 }
 
-int dev_map_enqueue(struct bpf_dtab_netdev *dst, struct xdp_buff *xdp,
+int dev_map_enqueue(struct bpf_dtab_netdev *dst, struct xdp_frame *xdpf,
 		    struct net_device *dev_rx)
 {
 	struct net_device *dev = dst->dev;
 
-	return __xdp_enqueue(dev, xdp, dev_rx, dst->xdp_prog);
+	return __xdp_enqueue(dev, xdpf, dev_rx, dst->xdp_prog);
 }
 
-static bool is_valid_dst(struct bpf_dtab_netdev *obj, struct xdp_buff *xdp)
+static bool is_valid_dst(struct bpf_dtab_netdev *obj, struct xdp_frame *xdpf)
 {
 	if (!obj ||
 	    !obj->dev->netdev_ops->ndo_xdp_xmit)
 		return false;
 
-	if (xdp_ok_fwd_dev(obj->dev, xdp->data_end - xdp->data))
+	if (xdp_ok_fwd_dev(obj->dev, xdpf->len))
 		return false;
 
 	return true;
@@ -587,14 +582,13 @@ static int get_upper_ifindexes(struct net_device *dev, int *indexes)
 	return n;
 }
 
-int dev_map_enqueue_multi(struct xdp_buff *xdp, struct net_device *dev_rx,
+int dev_map_enqueue_multi(struct xdp_frame *xdpf, struct net_device *dev_rx,
 			  struct bpf_map *map, bool exclude_ingress)
 {
 	struct bpf_dtab *dtab = container_of(map, struct bpf_dtab, map);
 	struct bpf_dtab_netdev *dst, *last_dst = NULL;
 	int excluded_devices[1+MAX_NEST_DEV];
 	struct hlist_head *head;
-	struct xdp_frame *xdpf;
 	int num_excluded = 0;
 	unsigned int i;
 	int err;
@@ -604,15 +598,11 @@ int dev_map_enqueue_multi(struct xdp_buff *xdp, struct net_device *dev_rx,
 		excluded_devices[num_excluded++] = dev_rx->ifindex;
 	}
 
-	xdpf = xdp_convert_buff_to_frame(xdp);
-	if (unlikely(!xdpf))
-		return -EOVERFLOW;
-
 	if (map->map_type == BPF_MAP_TYPE_DEVMAP) {
 		for (i = 0; i < map->max_entries; i++) {
 			dst = rcu_dereference_check(dtab->netdev_map[i],
 						    rcu_read_lock_bh_held());
-			if (!is_valid_dst(dst, xdp))
+			if (!is_valid_dst(dst, xdpf))
 				continue;
 
 			if (is_ifindex_excluded(excluded_devices, num_excluded, dst->dev->ifindex))
@@ -635,7 +625,7 @@ int dev_map_enqueue_multi(struct xdp_buff *xdp, struct net_device *dev_rx,
 			head = dev_map_index_hash(dtab, i);
 			hlist_for_each_entry_rcu(dst, head, index_hlist,
 						 lockdep_is_held(&dtab->index_lock)) {
-				if (!is_valid_dst(dst, xdp))
+				if (!is_valid_dst(dst, xdpf))
 					continue;
 
 				if (is_ifindex_excluded(excluded_devices, num_excluded,
diff --git a/net/core/filter.c b/net/core/filter.c
index 457d1a164ad5d..96441da61fca8 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -3994,12 +3994,24 @@ int xdp_do_redirect(struct net_device *dev, struct xdp_buff *xdp,
 	enum bpf_map_type map_type = ri->map_type;
 	void *fwd = ri->tgt_value;
 	u32 map_id = ri->map_id;
+	struct xdp_frame *xdpf;
 	struct bpf_map *map;
 	int err;
 
 	ri->map_id = 0; /* Valid map id idr range: [1,INT_MAX[ */
 	ri->map_type = BPF_MAP_TYPE_UNSPEC;
 
+	if (map_type == BPF_MAP_TYPE_XSKMAP) {
+		err = __xsk_map_redirect(fwd, xdp);
+		goto out;
+	}
+
+	xdpf = xdp_convert_buff_to_frame(xdp);
+	if (unlikely(!xdpf)) {
+		err = -EOVERFLOW;
+		goto err;
+	}
+
 	switch (map_type) {
 	case BPF_MAP_TYPE_DEVMAP:
 		fallthrough;
@@ -4007,17 +4019,14 @@ int xdp_do_redirect(struct net_device *dev, struct xdp_buff *xdp,
 		map = READ_ONCE(ri->map);
 		if (unlikely(map)) {
 			WRITE_ONCE(ri->map, NULL);
-			err = dev_map_enqueue_multi(xdp, dev, map,
+			err = dev_map_enqueue_multi(xdpf, dev, map,
 						    ri->flags & BPF_F_EXCLUDE_INGRESS);
 		} else {
-			err = dev_map_enqueue(fwd, xdp, dev);
+			err = dev_map_enqueue(fwd, xdpf, dev);
 		}
 		break;
 	case BPF_MAP_TYPE_CPUMAP:
-		err = cpu_map_enqueue(fwd, xdp, dev);
-		break;
-	case BPF_MAP_TYPE_XSKMAP:
-		err = __xsk_map_redirect(fwd, xdp);
+		err = cpu_map_enqueue(fwd, xdpf, dev);
 		break;
 	case BPF_MAP_TYPE_UNSPEC:
 		if (map_id == INT_MAX) {
@@ -4026,7 +4035,7 @@ int xdp_do_redirect(struct net_device *dev, struct xdp_buff *xdp,
 				err = -EINVAL;
 				break;
 			}
-			err = dev_xdp_enqueue(fwd, xdp, dev);
+			err = dev_xdp_enqueue(fwd, xdpf, dev);
 			break;
 		}
 		fallthrough;
@@ -4034,6 +4043,7 @@ int xdp_do_redirect(struct net_device *dev, struct xdp_buff *xdp,
 		err = -EBADRQC;
 	}
 
+out:
 	if (unlikely(err))
 		goto err;
 
-- 
2.43.0

[PATCH 5.15 031/168] xdp: Add xdp_do_redirect_frame() for pre-computed xdp_frames

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 1372d34ccf6dd480332b2bcb2fd59a2b9a0df415 ]

Add an xdp_do_redirect_frame() variant which supports pre-computed
xdp_frame structures. This will be used in bpf_prog_run() to avoid having
to write to the xdp_frame structure when the XDP program doesn't modify the
frame boundaries.

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220103150812.87914-6-toke@redhat.com
Stable-dep-of: 5bcf0dcbf906 ("xdp: use flags field to disambiguate broadcast redirect")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/filter.h |  4 +++
 net/core/filter.c      | 65 +++++++++++++++++++++++++++++++++++-------
 2 files changed, 58 insertions(+), 11 deletions(-)

diff --git a/include/linux/filter.h b/include/linux/filter.h
index ddaeb2afc022f..af0103bebb7bf 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -1020,6 +1020,10 @@ int xdp_do_generic_redirect(struct net_device *dev, struct sk_buff *skb,
 int xdp_do_redirect(struct net_device *dev,
 		    struct xdp_buff *xdp,
 		    struct bpf_prog *prog);
+int xdp_do_redirect_frame(struct net_device *dev,
+			  struct xdp_buff *xdp,
+			  struct xdp_frame *xdpf,
+			  struct bpf_prog *prog);
 void xdp_do_flush(void);
 
 /* The xdp_do_flush_map() helper has been renamed to drop the _map suffix, as
diff --git a/net/core/filter.c b/net/core/filter.c
index 96441da61fca8..b756951c92494 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -3987,26 +3987,44 @@ u32 xdp_master_redirect(struct xdp_buff *xdp)
 }
 EXPORT_SYMBOL_GPL(xdp_master_redirect);
 
-int xdp_do_redirect(struct net_device *dev, struct xdp_buff *xdp,
-		    struct bpf_prog *xdp_prog)
+static inline int __xdp_do_redirect_xsk(struct bpf_redirect_info *ri,
+					struct net_device *dev,
+					struct xdp_buff *xdp,
+					struct bpf_prog *xdp_prog)
 {
-	struct bpf_redirect_info *ri = this_cpu_ptr(&bpf_redirect_info);
 	enum bpf_map_type map_type = ri->map_type;
 	void *fwd = ri->tgt_value;
 	u32 map_id = ri->map_id;
-	struct xdp_frame *xdpf;
-	struct bpf_map *map;
 	int err;
 
 	ri->map_id = 0; /* Valid map id idr range: [1,INT_MAX[ */
 	ri->map_type = BPF_MAP_TYPE_UNSPEC;
 
-	if (map_type == BPF_MAP_TYPE_XSKMAP) {
-		err = __xsk_map_redirect(fwd, xdp);
-		goto out;
-	}
+	err = __xsk_map_redirect(fwd, xdp);
+	if (unlikely(err))
+		goto err;
+
+	_trace_xdp_redirect_map(dev, xdp_prog, fwd, map_type, map_id, ri->tgt_index);
+	return 0;
+err:
+	_trace_xdp_redirect_map_err(dev, xdp_prog, fwd, map_type, map_id, ri->tgt_index, err);
+	return err;
+}
+
+static __always_inline int __xdp_do_redirect_frame(struct bpf_redirect_info *ri,
+						   struct net_device *dev,
+						   struct xdp_frame *xdpf,
+						   struct bpf_prog *xdp_prog)
+{
+	enum bpf_map_type map_type = ri->map_type;
+	void *fwd = ri->tgt_value;
+	u32 map_id = ri->map_id;
+	struct bpf_map *map;
+	int err;
+
+	ri->map_id = 0; /* Valid map id idr range: [1,INT_MAX[ */
+	ri->map_type = BPF_MAP_TYPE_UNSPEC;
 
-	xdpf = xdp_convert_buff_to_frame(xdp);
 	if (unlikely(!xdpf)) {
 		err = -EOVERFLOW;
 		goto err;
@@ -4043,7 +4061,6 @@ int xdp_do_redirect(struct net_device *dev, struct xdp_buff *xdp,
 		err = -EBADRQC;
 	}
 
-out:
 	if (unlikely(err))
 		goto err;
 
@@ -4053,8 +4070,34 @@ int xdp_do_redirect(struct net_device *dev, struct xdp_buff *xdp,
 	_trace_xdp_redirect_map_err(dev, xdp_prog, fwd, map_type, map_id, ri->tgt_index, err);
 	return err;
 }
+
+int xdp_do_redirect(struct net_device *dev, struct xdp_buff *xdp,
+		    struct bpf_prog *xdp_prog)
+{
+	struct bpf_redirect_info *ri = this_cpu_ptr(&bpf_redirect_info);
+	enum bpf_map_type map_type = ri->map_type;
+
+	if (map_type == BPF_MAP_TYPE_XSKMAP)
+		return __xdp_do_redirect_xsk(ri, dev, xdp, xdp_prog);
+
+	return __xdp_do_redirect_frame(ri, dev, xdp_convert_buff_to_frame(xdp),
+				       xdp_prog);
+}
 EXPORT_SYMBOL_GPL(xdp_do_redirect);
 
+int xdp_do_redirect_frame(struct net_device *dev, struct xdp_buff *xdp,
+			  struct xdp_frame *xdpf, struct bpf_prog *xdp_prog)
+{
+	struct bpf_redirect_info *ri = this_cpu_ptr(&bpf_redirect_info);
+	enum bpf_map_type map_type = ri->map_type;
+
+	if (map_type == BPF_MAP_TYPE_XSKMAP)
+		return __xdp_do_redirect_xsk(ri, dev, xdp, xdp_prog);
+
+	return __xdp_do_redirect_frame(ri, dev, xdpf, xdp_prog);
+}
+EXPORT_SYMBOL_GPL(xdp_do_redirect_frame);
+
 static int xdp_do_generic_redirect_map(struct net_device *dev,
 				       struct sk_buff *skb,
 				       struct xdp_buff *xdp,
-- 
2.43.0

[PATCH 5.15 032/168] xdp: use flags field to disambiguate broadcast redirect

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 5bcf0dcbf9066348058b88a510c57f70f384c92c ]

When redirecting a packet using XDP, the bpf_redirect_map() helper will set
up the redirect destination information in struct bpf_redirect_info (using
the __bpf_xdp_redirect_map() helper function), and the xdp_do_redirect()
function will read this information after the XDP program returns and pass
the frame on to the right redirect destination.

When using the BPF_F_BROADCAST flag to do multicast redirect to a whole
map, __bpf_xdp_redirect_map() sets the 'map' pointer in struct
bpf_redirect_info to point to the destination map to be broadcast. And
xdp_do_redirect() reacts to the value of this map pointer to decide whether
it's dealing with a broadcast or a single-value redirect. However, if the
destination map is being destroyed before xdp_do_redirect() is called, the
map pointer will be cleared out (by bpf_clear_redirect_map()) without
waiting for any XDP programs to stop running. This causes xdp_do_redirect()
to think that the redirect was to a single target, but the target pointer
is also NULL (since broadcast redirects don't have a single target), so
this causes a crash when a NULL pointer is passed to dev_map_enqueue().

To fix this, change xdp_do_redirect() to react directly to the presence of
the BPF_F_BROADCAST flag in the 'flags' value in struct bpf_redirect_info
to disambiguate between a single-target and a broadcast redirect. And only
read the 'map' pointer if the broadcast flag is set, aborting if that has
been cleared out in the meantime. This prevents the crash, while keeping
the atomic (cmpxchg-based) clearing of the map pointer itself, and without
adding any more checks in the non-broadcast fast path.

Fixes: e624d4ed4aa8 ("xdp: Extend xdp_redirect_map with broadcast support")
Reported-and-tested-by: syzbot+af9492708df9797198d6@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20240418071840.156411-1-toke@redhat.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/filter.c | 42 ++++++++++++++++++++++++++++++++----------
 1 file changed, 32 insertions(+), 10 deletions(-)

diff --git a/net/core/filter.c b/net/core/filter.c
index b756951c92494..47eb1bd47aa6e 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -4019,10 +4019,12 @@ static __always_inline int __xdp_do_redirect_frame(struct bpf_redirect_info *ri,
 	enum bpf_map_type map_type = ri->map_type;
 	void *fwd = ri->tgt_value;
 	u32 map_id = ri->map_id;
+	u32 flags = ri->flags;
 	struct bpf_map *map;
 	int err;
 
 	ri->map_id = 0; /* Valid map id idr range: [1,INT_MAX[ */
+	ri->flags = 0;
 	ri->map_type = BPF_MAP_TYPE_UNSPEC;
 
 	if (unlikely(!xdpf)) {
@@ -4034,11 +4036,20 @@ static __always_inline int __xdp_do_redirect_frame(struct bpf_redirect_info *ri,
 	case BPF_MAP_TYPE_DEVMAP:
 		fallthrough;
 	case BPF_MAP_TYPE_DEVMAP_HASH:
-		map = READ_ONCE(ri->map);
-		if (unlikely(map)) {
+		if (unlikely(flags & BPF_F_BROADCAST)) {
+			map = READ_ONCE(ri->map);
+
+			/* The map pointer is cleared when the map is being torn
+			 * down by bpf_clear_redirect_map()
+			 */
+			if (unlikely(!map)) {
+				err = -ENOENT;
+				break;
+			}
+
 			WRITE_ONCE(ri->map, NULL);
 			err = dev_map_enqueue_multi(xdpf, dev, map,
-						    ri->flags & BPF_F_EXCLUDE_INGRESS);
+						    flags & BPF_F_EXCLUDE_INGRESS);
 		} else {
 			err = dev_map_enqueue(fwd, xdpf, dev);
 		}
@@ -4101,9 +4112,9 @@ EXPORT_SYMBOL_GPL(xdp_do_redirect_frame);
 static int xdp_do_generic_redirect_map(struct net_device *dev,
 				       struct sk_buff *skb,
 				       struct xdp_buff *xdp,
-				       struct bpf_prog *xdp_prog,
-				       void *fwd,
-				       enum bpf_map_type map_type, u32 map_id)
+				       struct bpf_prog *xdp_prog, void *fwd,
+				       enum bpf_map_type map_type, u32 map_id,
+				       u32 flags)
 {
 	struct bpf_redirect_info *ri = this_cpu_ptr(&bpf_redirect_info);
 	struct bpf_map *map;
@@ -4113,11 +4124,20 @@ static int xdp_do_generic_redirect_map(struct net_device *dev,
 	case BPF_MAP_TYPE_DEVMAP:
 		fallthrough;
 	case BPF_MAP_TYPE_DEVMAP_HASH:
-		map = READ_ONCE(ri->map);
-		if (unlikely(map)) {
+		if (unlikely(flags & BPF_F_BROADCAST)) {
+			map = READ_ONCE(ri->map);
+
+			/* The map pointer is cleared when the map is being torn
+			 * down by bpf_clear_redirect_map()
+			 */
+			if (unlikely(!map)) {
+				err = -ENOENT;
+				break;
+			}
+
 			WRITE_ONCE(ri->map, NULL);
 			err = dev_map_redirect_multi(dev, skb, xdp_prog, map,
-						     ri->flags & BPF_F_EXCLUDE_INGRESS);
+						     flags & BPF_F_EXCLUDE_INGRESS);
 		} else {
 			err = dev_map_generic_redirect(fwd, skb, xdp_prog);
 		}
@@ -4154,9 +4174,11 @@ int xdp_do_generic_redirect(struct net_device *dev, struct sk_buff *skb,
 	enum bpf_map_type map_type = ri->map_type;
 	void *fwd = ri->tgt_value;
 	u32 map_id = ri->map_id;
+	u32 flags = ri->flags;
 	int err;
 
 	ri->map_id = 0; /* Valid map id idr range: [1,INT_MAX[ */
+	ri->flags = 0;
 	ri->map_type = BPF_MAP_TYPE_UNSPEC;
 
 	if (map_type == BPF_MAP_TYPE_UNSPEC && map_id == INT_MAX) {
@@ -4176,7 +4198,7 @@ int xdp_do_generic_redirect(struct net_device *dev, struct sk_buff *skb,
 		return 0;
 	}
 
-	return xdp_do_generic_redirect_map(dev, skb, xdp, xdp_prog, fwd, map_type, map_id);
+	return xdp_do_generic_redirect_map(dev, skb, xdp, xdp_prog, fwd, map_type, map_id, flags);
 err:
 	_trace_xdp_redirect_err(dev, xdp_prog, ri->tgt_index, err);
 	return err;
-- 
2.43.0

[PATCH 5.15 033/168] bna: ensure the copied buf is NUL terminated

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bui Quang Minh <minhquangbui99@gmail.com>

[ Upstream commit 8c34096c7fdf272fd4c0c37fe411cd2e3ed0ee9f ]

Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from
userspace to that buffer. Later, we use sscanf on this buffer but we don't
ensure that the string is terminated inside the buffer, this can lead to
OOB read when using sscanf. Fix this issue by using memdup_user_nul
instead of memdup_user.

Fixes: 7afc5dbde091 ("bna: Add debugfs interface.")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-2-f1f1b53a10f4@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/brocade/bna/bnad_debugfs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c
index 04ad0f2b9677e..777f0d7e48192 100644
--- a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c
+++ b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c
@@ -312,7 +312,7 @@ bnad_debugfs_write_regrd(struct file *file, const char __user *buf,
 	void *kern_buf;
 
 	/* Copy the user space buf */
-	kern_buf = memdup_user(buf, nbytes);
+	kern_buf = memdup_user_nul(buf, nbytes);
 	if (IS_ERR(kern_buf))
 		return PTR_ERR(kern_buf);
 
@@ -372,7 +372,7 @@ bnad_debugfs_write_regwr(struct file *file, const char __user *buf,
 	void *kern_buf;
 
 	/* Copy the user space buf */
-	kern_buf = memdup_user(buf, nbytes);
+	kern_buf = memdup_user_nul(buf, nbytes);
 	if (IS_ERR(kern_buf))
 		return PTR_ERR(kern_buf);
 
-- 
2.43.0

[PATCH 5.15 034/168] octeontx2-af: avoid off-by-one read from userspace

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bui Quang Minh <minhquangbui99@gmail.com>

[ Upstream commit f299ee709fb45036454ca11e90cb2810fe771878 ]

We try to access count + 1 byte from userspace with memdup_user(buffer,
count + 1). However, the userspace only provides buffer of count bytes and
only these count bytes are verified to be okay to access. To ensure the
copied buffer is NUL terminated, we use memdup_user_nul instead.

Fixes: 3a2eb515d136 ("octeontx2-af: Fix an off by one in rvu_dbg_qsize_write()")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-6-f1f1b53a10f4@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c
index 4dddf6ec3be87..e201827529513 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c
@@ -559,12 +559,10 @@ static ssize_t rvu_dbg_qsize_write(struct file *filp,
 	u16 pcifunc;
 	int ret, lf;
 
-	cmd_buf = memdup_user(buffer, count + 1);
+	cmd_buf = memdup_user_nul(buffer, count);
 	if (IS_ERR(cmd_buf))
 		return -ENOMEM;
 
-	cmd_buf[count] = '\0';
-
 	cmd_buf_tmp = strchr(cmd_buf, '\n');
 	if (cmd_buf_tmp) {
 		*cmd_buf_tmp = '\0';
-- 
2.43.0

[PATCH 5.15 035/168] nsh: Restore skb->{protocol,data,mac_header} for outer header in nsh_gso_segment().

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 4b911a9690d72641879ea6d13cce1de31d346d79 ]

syzbot triggered various splats (see [0] and links) by a crafted GSO
packet of VIRTIO_NET_HDR_GSO_UDP layering the following protocols:

  ETH_P_8021AD + ETH_P_NSH + ETH_P_IPV6 + IPPROTO_UDP

NSH can encapsulate IPv4, IPv6, Ethernet, NSH, and MPLS.  As the inner
protocol can be Ethernet, NSH GSO handler, nsh_gso_segment(), calls
skb_mac_gso_segment() to invoke inner protocol GSO handlers.

nsh_gso_segment() does the following for the original skb before
calling skb_mac_gso_segment()

  1. reset skb->network_header
  2. save the original skb->{mac_heaeder,mac_len} in a local variable
  3. pull the NSH header
  4. resets skb->mac_header
  5. set up skb->mac_len and skb->protocol for the inner protocol.

and does the following for the segmented skb

  6. set ntohs(ETH_P_NSH) to skb->protocol
  7. push the NSH header
  8. restore skb->mac_header
  9. set skb->mac_header + mac_len to skb->network_header
 10. restore skb->mac_len

There are two problems in 6-7 and 8-9.

  (a)
  After 6 & 7, skb->data points to the NSH header, so the outer header
  (ETH_P_8021AD in this case) is stripped when skb is sent out of netdev.

  Also, if NSH is encapsulated by NSH + Ethernet (so NSH-Ethernet-NSH),
  skb_pull() in the first nsh_gso_segment() will make skb->data point
  to the middle of the outer NSH or Ethernet header because the Ethernet
  header is not pulled by the second nsh_gso_segment().

  (b)
  While restoring skb->{mac_header,network_header} in 8 & 9,
  nsh_gso_segment() does not assume that the data in the linear
  buffer is shifted.

  However, udp6_ufo_fragment() could shift the data and change
  skb->mac_header accordingly as demonstrated by syzbot.

  If this happens, even the restored skb->mac_header points to
  the middle of the outer header.

It seems nsh_gso_segment() has never worked with outer headers so far.

At the end of nsh_gso_segment(), the outer header must be restored for
the segmented skb, instead of the NSH header.

To do that, let's calculate the outer header position relatively from
the inner header and set skb->{data,mac_header,protocol} properly.

[0]:
BUG: KMSAN: uninit-value in ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline]
BUG: KMSAN: uninit-value in ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
BUG: KMSAN: uninit-value in ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668
 ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline]
 ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
 ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668
 ipvlan_start_xmit+0x5c/0x1a0 drivers/net/ipvlan/ipvlan_main.c:222
 __netdev_start_xmit include/linux/netdevice.h:4989 [inline]
 netdev_start_xmit include/linux/netdevice.h:5003 [inline]
 xmit_one net/core/dev.c:3547 [inline]
 dev_hard_start_xmit+0x244/0xa10 net/core/dev.c:3563
 __dev_queue_xmit+0x33ed/0x51c0 net/core/dev.c:4351
 dev_queue_xmit include/linux/netdevice.h:3171 [inline]
 packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
 packet_snd net/packet/af_packet.c:3081 [inline]
 packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 __sys_sendto+0x735/0xa10 net/socket.c:2191
 __do_sys_sendto net/socket.c:2203 [inline]
 __se_sys_sendto net/socket.c:2199 [inline]
 __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
 slab_post_alloc_hook mm/slub.c:3819 [inline]
 slab_alloc_node mm/slub.c:3860 [inline]
 __do_kmalloc_node mm/slub.c:3980 [inline]
 __kmalloc_node_track_caller+0x705/0x1000 mm/slub.c:4001
 kmalloc_reserve+0x249/0x4a0 net/core/skbuff.c:582
 __alloc_skb+0x352/0x790 net/core/skbuff.c:651
 skb_segment+0x20aa/0x7080 net/core/skbuff.c:4647
 udp6_ufo_fragment+0xcab/0x1150 net/ipv6/udp_offload.c:109
 ipv6_gso_segment+0x14be/0x2ca0 net/ipv6/ip6_offload.c:152
 skb_mac_gso_segment+0x3e8/0x760 net/core/gso.c:53
 nsh_gso_segment+0x6f4/0xf70 net/nsh/nsh.c:108
 skb_mac_gso_segment+0x3e8/0x760 net/core/gso.c:53
 __skb_gso_segment+0x4b0/0x730 net/core/gso.c:124
 skb_gso_segment include/net/gso.h:83 [inline]
 validate_xmit_skb+0x107f/0x1930 net/core/dev.c:3628
 __dev_queue_xmit+0x1f28/0x51c0 net/core/dev.c:4343
 dev_queue_xmit include/linux/netdevice.h:3171 [inline]
 packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
 packet_snd net/packet/af_packet.c:3081 [inline]
 packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 __sys_sendto+0x735/0xa10 net/socket.c:2191
 __do_sys_sendto net/socket.c:2203 [inline]
 __se_sys_sendto net/socket.c:2199 [inline]
 __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

CPU: 1 PID: 5101 Comm: syz-executor421 Not tainted 6.8.0-rc5-syzkaller-00297-gf2e367d6ad3b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024

Fixes: c411ed854584 ("nsh: add GSO support")
Reported-and-tested-by: syzbot+42a0dc856239de4de60e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=42a0dc856239de4de60e
Reported-and-tested-by: syzbot+c298c9f0e46a3c86332b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c298c9f0e46a3c86332b
Link: https://lore.kernel.org/netdev/20240415222041.18537-1-kuniyu@amazon.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240424023549.21862-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/nsh/nsh.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/net/nsh/nsh.c b/net/nsh/nsh.c
index 0f23e5e8e03eb..3e0fc71d95a14 100644
--- a/net/nsh/nsh.c
+++ b/net/nsh/nsh.c
@@ -76,13 +76,15 @@ EXPORT_SYMBOL_GPL(nsh_pop);
 static struct sk_buff *nsh_gso_segment(struct sk_buff *skb,
 				       netdev_features_t features)
 {
+	unsigned int outer_hlen, mac_len, nsh_len;
 	struct sk_buff *segs = ERR_PTR(-EINVAL);
 	u16 mac_offset = skb->mac_header;
-	unsigned int nsh_len, mac_len;
-	__be16 proto;
+	__be16 outer_proto, proto;
 
 	skb_reset_network_header(skb);
 
+	outer_proto = skb->protocol;
+	outer_hlen = skb_mac_header_len(skb);
 	mac_len = skb->mac_len;
 
 	if (unlikely(!pskb_may_pull(skb, NSH_BASE_HDR_LEN)))
@@ -112,10 +114,10 @@ static struct sk_buff *nsh_gso_segment(struct sk_buff *skb,
 	}
 
 	for (skb = segs; skb; skb = skb->next) {
-		skb->protocol = htons(ETH_P_NSH);
-		__skb_push(skb, nsh_len);
-		skb->mac_header = mac_offset;
-		skb->network_header = skb->mac_header + mac_len;
+		skb->protocol = outer_proto;
+		__skb_push(skb, nsh_len + outer_hlen);
+		skb_reset_mac_header(skb);
+		skb_set_network_header(skb, outer_hlen);
 		skb->mac_len = mac_len;
 	}
 
-- 
2.43.0

[PATCH 5.15 036/168] net l2tp: drop flow hash on forward

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Bauer <mail@david-bauer.net>

[ Upstream commit 42f853b42899d9b445763b55c3c8adc72be0f0e1 ]

Drop the flow-hash of the skb when forwarding to the L2TP netdev.

This avoids the L2TP qdisc from using the flow-hash from the outer
packet, which is identical for every flow within the tunnel.

This does not affect every platform but is specific for the ethernet
driver. It depends on the platform including L4 information in the
flow-hash.

One such example is the Mediatek Filogic MT798x family of networking
processors.

Fixes: d9e31d17ceba ("l2tp: Add L2TP ethernet pseudowire support")
Acked-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240424171110.13701-1-mail@david-bauer.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/l2tp/l2tp_eth.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/l2tp/l2tp_eth.c b/net/l2tp/l2tp_eth.c
index 6cd97c75445c8..9a36e174984cf 100644
--- a/net/l2tp/l2tp_eth.c
+++ b/net/l2tp/l2tp_eth.c
@@ -136,6 +136,9 @@ static void l2tp_eth_dev_recv(struct l2tp_session *session, struct sk_buff *skb,
 	/* checksums verified by L2TP */
 	skb->ip_summed = CHECKSUM_NONE;
 
+	/* drop outer flow-hash */
+	skb_clear_hash(skb);
+
 	skb_dst_drop(skb);
 	nf_reset_ct(skb);
 
-- 
2.43.0

[PATCH 5.15 037/168] s390/vdso: Add CFI for RA register to asm macro vdso_func

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jens Remus <jremus@linux.ibm.com>

[ Upstream commit b961ec10b9f9719987470236feb50c967db5a652 ]

The return-address (RA) register r14 is specified as volatile in the
s390x ELF ABI [1]. Nevertheless proper CFI directives must be provided
for an unwinder to restore the return address, if the RA register
value is changed from its value at function entry, as it is the case.

[1]: s390x ELF ABI, https://github.com/IBM/s390x-abi/releases

Fixes: 4bff8cb54502 ("s390: convert to GENERIC_VDSO")
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/include/asm/dwarf.h               | 1 +
 arch/s390/kernel/vdso64/vdso_user_wrapper.S | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/arch/s390/include/asm/dwarf.h b/arch/s390/include/asm/dwarf.h
index 4f21ae561e4dd..390906b8e386e 100644
--- a/arch/s390/include/asm/dwarf.h
+++ b/arch/s390/include/asm/dwarf.h
@@ -9,6 +9,7 @@
 #define CFI_DEF_CFA_OFFSET	.cfi_def_cfa_offset
 #define CFI_ADJUST_CFA_OFFSET	.cfi_adjust_cfa_offset
 #define CFI_RESTORE		.cfi_restore
+#define CFI_REL_OFFSET		.cfi_rel_offset
 
 #ifdef CONFIG_AS_CFI_VAL_OFFSET
 #define CFI_VAL_OFFSET		.cfi_val_offset
diff --git a/arch/s390/kernel/vdso64/vdso_user_wrapper.S b/arch/s390/kernel/vdso64/vdso_user_wrapper.S
index 97f0c0a669a59..0625381359df4 100644
--- a/arch/s390/kernel/vdso64/vdso_user_wrapper.S
+++ b/arch/s390/kernel/vdso64/vdso_user_wrapper.S
@@ -23,8 +23,10 @@ __kernel_\func:
 	CFI_DEF_CFA_OFFSET (STACK_FRAME_OVERHEAD + WRAPPER_FRAME_SIZE)
 	CFI_VAL_OFFSET 15, -STACK_FRAME_OVERHEAD
 	stg	%r14,STACK_FRAME_OVERHEAD(%r15)
+	CFI_REL_OFFSET 14, STACK_FRAME_OVERHEAD
 	brasl	%r14,__s390_vdso_\func
 	lg	%r14,STACK_FRAME_OVERHEAD(%r15)
+	CFI_RESTORE 14
 	aghi	%r15,WRAPPER_FRAME_SIZE
 	CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD
 	CFI_RESTORE 15
-- 
2.43.0

[PATCH 5.15 038/168] net: qede: sanitize rc in qede_add_tc_flower_fltr()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Asbjørn Sloth Tønnesen <ast@fiberby.net>

[ Upstream commit e25714466abd9d96901b15efddf82c60a38abd86 ]

Explicitly set 'rc' (return code), before jumping to the
unlock and return path.

By not having any code depend on that 'rc' remains at
it's initial value of -EINVAL, then we can re-use 'rc' for
the return code of function calls in subsequent patches.

Only compile tested.

Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: fcee2065a178 ("net: qede: use return from qede_parse_flow_attr() for flower")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qede/qede_filter.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qede/qede_filter.c b/drivers/net/ethernet/qlogic/qede/qede_filter.c
index 3010833ddde33..76aa5934e985b 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_filter.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_filter.c
@@ -1868,8 +1868,8 @@ int qede_add_tc_flower_fltr(struct qede_dev *edev, __be16 proto,
 			    struct flow_cls_offload *f)
 {
 	struct qede_arfs_fltr_node *n;
-	int min_hlen, rc = -EINVAL;
 	struct qede_arfs_tuple t;
+	int min_hlen, rc;
 
 	__qede_lock(edev);
 
@@ -1879,8 +1879,10 @@ int qede_add_tc_flower_fltr(struct qede_dev *edev, __be16 proto,
 	}
 
 	/* parse flower attribute and prepare filter */
-	if (qede_parse_flow_attr(edev, proto, f->rule, &t))
+	if (qede_parse_flow_attr(edev, proto, f->rule, &t)) {
+		rc = -EINVAL;
 		goto unlock;
+	}
 
 	/* Validate profile mode and number of filters */
 	if ((edev->arfs->filter_count && edev->arfs->mode != t.mode) ||
@@ -1888,12 +1890,15 @@ int qede_add_tc_flower_fltr(struct qede_dev *edev, __be16 proto,
 		DP_NOTICE(edev,
 			  "Filter configuration invalidated, filter mode=0x%x, configured mode=0x%x, filter count=0x%x\n",
 			  t.mode, edev->arfs->mode, edev->arfs->filter_count);
+		rc = -EINVAL;
 		goto unlock;
 	}
 
 	/* parse tc actions and get the vf_id */
-	if (qede_parse_actions(edev, &f->rule->action, f->common.extack))
+	if (qede_parse_actions(edev, &f->rule->action, f->common.extack)) {
+		rc = -EINVAL;
 		goto unlock;
+	}
 
 	if (qede_flow_find_fltr(edev, &t)) {
 		rc = -EEXIST;
-- 
2.43.0

[PATCH 5.15 039/168] net: qede: use return from qede_parse_flow_attr() for flower

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Asbjørn Sloth Tønnesen <ast@fiberby.net>

[ Upstream commit fcee2065a178f78be6fd516302830378b17dba3d ]

In qede_add_tc_flower_fltr(), when calling
qede_parse_flow_attr() then the return code
was only used for a non-zero check, and then
-EINVAL was returned.

qede_parse_flow_attr() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
* -EPROTONOSUPPORT

This patch changes the code to use the actual
return code, not just return -EINVAL.

The blaimed commit introduced these functions.

Only compile tested.

Fixes: 2ce9c93eaca6 ("qede: Ingress tc flower offload (drop action) support.")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qede/qede_filter.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qede/qede_filter.c b/drivers/net/ethernet/qlogic/qede/qede_filter.c
index 76aa5934e985b..aedb98713bbf2 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_filter.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_filter.c
@@ -1879,10 +1879,9 @@ int qede_add_tc_flower_fltr(struct qede_dev *edev, __be16 proto,
 	}
 
 	/* parse flower attribute and prepare filter */
-	if (qede_parse_flow_attr(edev, proto, f->rule, &t)) {
-		rc = -EINVAL;
+	rc = qede_parse_flow_attr(edev, proto, f->rule, &t);
+	if (rc)
 		goto unlock;
-	}
 
 	/* Validate profile mode and number of filters */
 	if ((edev->arfs->filter_count && edev->arfs->mode != t.mode) ||
-- 
2.43.0

[PATCH 5.15 040/168] net: qede: use return from qede_parse_flow_attr() for flow_spec

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Asbjørn Sloth Tønnesen <ast@fiberby.net>

[ Upstream commit 27b44414a34b108c5a37cd5b4894f606061d86e7 ]

In qede_flow_spec_to_rule(), when calling
qede_parse_flow_attr() then the return code
was only used for a non-zero check, and then
-EINVAL was returned.

qede_parse_flow_attr() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
* -EPROTONOSUPPORT

This patch changes the code to use the actual
return code, not just return -EINVAL.

The blaimed commit introduced qede_flow_spec_to_rule(),
and this call to qede_parse_flow_attr(), it looks
like it just duplicated how it was already used.

Only compile tested.

Fixes: 37c5d3efd7f8 ("qede: use ethtool_rx_flow_rule() to remove duplicated parser code")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qede/qede_filter.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qede/qede_filter.c b/drivers/net/ethernet/qlogic/qede/qede_filter.c
index aedb98713bbf2..aeff091cdfaee 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_filter.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_filter.c
@@ -2002,10 +2002,9 @@ static int qede_flow_spec_to_rule(struct qede_dev *edev,
 	if (IS_ERR(flow))
 		return PTR_ERR(flow);
 
-	if (qede_parse_flow_attr(edev, proto, flow->rule, t)) {
-		err = -EINVAL;
+	err = qede_parse_flow_attr(edev, proto, flow->rule, t);
+	if (err)
 		goto err_out;
-	}
 
 	/* Make sure location is valid and filter isn't already set */
 	err = qede_flow_spec_validate(edev, &flow->rule->action, t,
-- 
2.43.0

[PATCH 5.15 041/168] net: qede: use return from qede_parse_actions()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Asbjørn Sloth Tønnesen <ast@fiberby.net>

[ Upstream commit f26f719a36e56381a1f4230e5364e7ad4d485888 ]

When calling qede_parse_actions() then the
return code was only used for a non-zero check,
and then -EINVAL was returned.

qede_parse_actions() can currently fail with:
* -EINVAL
* -EOPNOTSUPP

This patch changes the code to use the actual
return code, not just return -EINVAL.

The blaimed commit broke the implicit assumption
that only -EINVAL would ever be returned.

Only compile tested.

Fixes: 319a1d19471e ("flow_offload: check for basic action hw stats type")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qede/qede_filter.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qede/qede_filter.c b/drivers/net/ethernet/qlogic/qede/qede_filter.c
index aeff091cdfaee..8871099b99d8a 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_filter.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_filter.c
@@ -1894,10 +1894,9 @@ int qede_add_tc_flower_fltr(struct qede_dev *edev, __be16 proto,
 	}
 
 	/* parse tc actions and get the vf_id */
-	if (qede_parse_actions(edev, &f->rule->action, f->common.extack)) {
-		rc = -EINVAL;
+	rc = qede_parse_actions(edev, &f->rule->action, f->common.extack);
+	if (rc)
 		goto unlock;
-	}
 
 	if (qede_flow_find_fltr(edev, &t)) {
 		rc = -EEXIST;
-- 
2.43.0

[PATCH 5.15 042/168] ASoC: meson: axg-fifo: use FIELD helpers

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 9e6f39535c794adea6ba802a52c722d193c28124 ]

Use FIELD_GET() and FIELD_PREP() helpers instead of doing it manually.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20240227150826.573581-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: b11d26660dff ("ASoC: meson: axg-fifo: use threaded irq to check periods")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/axg-fifo.c  | 25 +++++++++++++------------
 sound/soc/meson/axg-fifo.h  | 12 +++++-------
 sound/soc/meson/axg-frddr.c |  5 +++--
 sound/soc/meson/axg-toddr.c | 22 ++++++++++------------
 4 files changed, 31 insertions(+), 33 deletions(-)

diff --git a/sound/soc/meson/axg-fifo.c b/sound/soc/meson/axg-fifo.c
index bccfb770b3391..bde7598750064 100644
--- a/sound/soc/meson/axg-fifo.c
+++ b/sound/soc/meson/axg-fifo.c
@@ -3,6 +3,7 @@
 // Copyright (c) 2018 BayLibre, SAS.
 // Author: Jerome Brunet <jbrunet@baylibre.com>
 
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
@@ -145,8 +146,8 @@ int axg_fifo_pcm_hw_params(struct snd_soc_component *component,
 	/* Enable irq if necessary  */
 	irq_en = runtime->no_period_wakeup ? 0 : FIFO_INT_COUNT_REPEAT;
 	regmap_update_bits(fifo->map, FIFO_CTRL0,
-			   CTRL0_INT_EN(FIFO_INT_COUNT_REPEAT),
-			   CTRL0_INT_EN(irq_en));
+			   CTRL0_INT_EN,
+			   FIELD_PREP(CTRL0_INT_EN, irq_en));
 
 	return 0;
 }
@@ -176,9 +177,9 @@ int axg_fifo_pcm_hw_free(struct snd_soc_component *component,
 {
 	struct axg_fifo *fifo = axg_fifo_data(ss);
 
-	/* Disable the block count irq */
+	/* Disable irqs */
 	regmap_update_bits(fifo->map, FIFO_CTRL0,
-			   CTRL0_INT_EN(FIFO_INT_COUNT_REPEAT), 0);
+			   CTRL0_INT_EN, 0);
 
 	return 0;
 }
@@ -187,13 +188,13 @@ EXPORT_SYMBOL_GPL(axg_fifo_pcm_hw_free);
 static void axg_fifo_ack_irq(struct axg_fifo *fifo, u8 mask)
 {
 	regmap_update_bits(fifo->map, FIFO_CTRL1,
-			   CTRL1_INT_CLR(FIFO_INT_MASK),
-			   CTRL1_INT_CLR(mask));
+			   CTRL1_INT_CLR,
+			   FIELD_PREP(CTRL1_INT_CLR, mask));
 
 	/* Clear must also be cleared */
 	regmap_update_bits(fifo->map, FIFO_CTRL1,
-			   CTRL1_INT_CLR(FIFO_INT_MASK),
-			   0);
+			   CTRL1_INT_CLR,
+			   FIELD_PREP(CTRL1_INT_CLR, 0));
 }
 
 static irqreturn_t axg_fifo_pcm_irq_block(int irq, void *dev_id)
@@ -204,7 +205,7 @@ static irqreturn_t axg_fifo_pcm_irq_block(int irq, void *dev_id)
 
 	regmap_read(fifo->map, FIFO_STATUS1, &status);
 
-	status = STATUS1_INT_STS(status) & FIFO_INT_MASK;
+	status = FIELD_GET(STATUS1_INT_STS, status);
 	if (status & FIFO_INT_COUNT_REPEAT)
 		snd_pcm_period_elapsed(ss);
 	else
@@ -254,15 +255,15 @@ int axg_fifo_pcm_open(struct snd_soc_component *component,
 
 	/* Setup status2 so it reports the memory pointer */
 	regmap_update_bits(fifo->map, FIFO_CTRL1,
-			   CTRL1_STATUS2_SEL_MASK,
-			   CTRL1_STATUS2_SEL(STATUS2_SEL_DDR_READ));
+			   CTRL1_STATUS2_SEL,
+			   FIELD_PREP(CTRL1_STATUS2_SEL, STATUS2_SEL_DDR_READ));
 
 	/* Make sure the dma is initially disabled */
 	__dma_enable(fifo, false);
 
 	/* Disable irqs until params are ready */
 	regmap_update_bits(fifo->map, FIFO_CTRL0,
-			   CTRL0_INT_EN(FIFO_INT_MASK), 0);
+			   CTRL0_INT_EN, 0);
 
 	/* Clear any pending interrupt */
 	axg_fifo_ack_irq(fifo, FIFO_INT_MASK);
diff --git a/sound/soc/meson/axg-fifo.h b/sound/soc/meson/axg-fifo.h
index b63acd723c870..5b7d32c37991b 100644
--- a/sound/soc/meson/axg-fifo.h
+++ b/sound/soc/meson/axg-fifo.h
@@ -42,21 +42,19 @@ struct snd_soc_pcm_runtime;
 
 #define FIFO_CTRL0			0x00
 #define  CTRL0_DMA_EN			BIT(31)
-#define  CTRL0_INT_EN(x)		((x) << 16)
+#define  CTRL0_INT_EN			GENMASK(23, 16)
 #define  CTRL0_SEL_MASK			GENMASK(2, 0)
 #define  CTRL0_SEL_SHIFT		0
 #define FIFO_CTRL1			0x04
-#define  CTRL1_INT_CLR(x)		((x) << 0)
-#define  CTRL1_STATUS2_SEL_MASK		GENMASK(11, 8)
-#define  CTRL1_STATUS2_SEL(x)		((x) << 8)
+#define  CTRL1_INT_CLR			GENMASK(7, 0)
+#define  CTRL1_STATUS2_SEL		GENMASK(11, 8)
 #define   STATUS2_SEL_DDR_READ		0
-#define  CTRL1_FRDDR_DEPTH_MASK		GENMASK(31, 24)
-#define  CTRL1_FRDDR_DEPTH(x)		((x) << 24)
+#define  CTRL1_FRDDR_DEPTH		GENMASK(31, 24)
 #define FIFO_START_ADDR			0x08
 #define FIFO_FINISH_ADDR		0x0c
 #define FIFO_INT_ADDR			0x10
 #define FIFO_STATUS1			0x14
-#define  STATUS1_INT_STS(x)		((x) << 0)
+#define  STATUS1_INT_STS		GENMASK(7, 0)
 #define FIFO_STATUS2			0x18
 #define FIFO_INIT_ADDR			0x24
 #define FIFO_CTRL2			0x28
diff --git a/sound/soc/meson/axg-frddr.c b/sound/soc/meson/axg-frddr.c
index 37f4bb3469b5c..38c731ad40706 100644
--- a/sound/soc/meson/axg-frddr.c
+++ b/sound/soc/meson/axg-frddr.c
@@ -7,6 +7,7 @@
  * This driver implements the frontend playback DAI of AXG and G12A based SoCs
  */
 
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/regmap.h>
 #include <linux/module.h>
@@ -59,8 +60,8 @@ static int axg_frddr_dai_hw_params(struct snd_pcm_substream *substream,
 	/* Trim the FIFO depth if the period is small to improve latency */
 	depth = min(period, fifo->depth);
 	val = (depth / AXG_FIFO_BURST) - 1;
-	regmap_update_bits(fifo->map, FIFO_CTRL1, CTRL1_FRDDR_DEPTH_MASK,
-			   CTRL1_FRDDR_DEPTH(val));
+	regmap_update_bits(fifo->map, FIFO_CTRL1, CTRL1_FRDDR_DEPTH,
+			   FIELD_PREP(CTRL1_FRDDR_DEPTH, val));
 
 	return 0;
 }
diff --git a/sound/soc/meson/axg-toddr.c b/sound/soc/meson/axg-toddr.c
index d6adf7edea41f..85a17d8861f26 100644
--- a/sound/soc/meson/axg-toddr.c
+++ b/sound/soc/meson/axg-toddr.c
@@ -5,6 +5,7 @@
 
 /* This driver implements the frontend capture DAI of AXG based SoCs */
 
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/regmap.h>
 #include <linux/module.h>
@@ -19,12 +20,9 @@
 #define CTRL0_TODDR_EXT_SIGNED		BIT(29)
 #define CTRL0_TODDR_PP_MODE		BIT(28)
 #define CTRL0_TODDR_SYNC_CH		BIT(27)
-#define CTRL0_TODDR_TYPE_MASK		GENMASK(15, 13)
-#define CTRL0_TODDR_TYPE(x)		((x) << 13)
-#define CTRL0_TODDR_MSB_POS_MASK	GENMASK(12, 8)
-#define CTRL0_TODDR_MSB_POS(x)		((x) << 8)
-#define CTRL0_TODDR_LSB_POS_MASK	GENMASK(7, 3)
-#define CTRL0_TODDR_LSB_POS(x)		((x) << 3)
+#define CTRL0_TODDR_TYPE		GENMASK(15, 13)
+#define CTRL0_TODDR_MSB_POS		GENMASK(12, 8)
+#define CTRL0_TODDR_LSB_POS		GENMASK(7, 3)
 #define CTRL1_TODDR_FORCE_FINISH	BIT(25)
 #define CTRL1_SEL_SHIFT			28
 
@@ -76,12 +74,12 @@ static int axg_toddr_dai_hw_params(struct snd_pcm_substream *substream,
 	width = params_width(params);
 
 	regmap_update_bits(fifo->map, FIFO_CTRL0,
-			   CTRL0_TODDR_TYPE_MASK |
-			   CTRL0_TODDR_MSB_POS_MASK |
-			   CTRL0_TODDR_LSB_POS_MASK,
-			   CTRL0_TODDR_TYPE(type) |
-			   CTRL0_TODDR_MSB_POS(TODDR_MSB_POS) |
-			   CTRL0_TODDR_LSB_POS(TODDR_MSB_POS - (width - 1)));
+			   CTRL0_TODDR_TYPE |
+			   CTRL0_TODDR_MSB_POS |
+			   CTRL0_TODDR_LSB_POS,
+			   FIELD_PREP(CTRL0_TODDR_TYPE, type) |
+			   FIELD_PREP(CTRL0_TODDR_MSB_POS, TODDR_MSB_POS) |
+			   FIELD_PREP(CTRL0_TODDR_LSB_POS, TODDR_MSB_POS - (width - 1)));
 
 	return 0;
 }
-- 
2.43.0

[PATCH 5.15 043/168] ASoC: meson: axg-fifo: use threaded irq to check periods

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit b11d26660dff8d7430892008616452dc8e5fb0f3 ]

With the AXG audio subsystem, there is a possible random channel shift on
TDM capture, when the slot number per lane is more than 2, and there is
more than one lane used.

The problem has been there since the introduction of the axg audio support
but such scenario is pretty uncommon. This is why there is no loud
complains about the problem.

Solving the problem require to make the links non-atomic and use the
trigger() callback to start FEs and BEs in the appropriate order.

This was tried in the past and reverted because it caused the block irq to
sleep while atomic. However, instead of reverting, the solution is to call
snd_pcm_period_elapsed() in a non atomic context.

Use the bottom half of a threaded IRQ to do so.

Fixes: 6dc4fa179fb8 ("ASoC: meson: add axg fifo base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426152946.3078805-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/axg-fifo.c | 29 +++++++++++++++++++----------
 1 file changed, 19 insertions(+), 10 deletions(-)

diff --git a/sound/soc/meson/axg-fifo.c b/sound/soc/meson/axg-fifo.c
index bde7598750064..94b169a5493b5 100644
--- a/sound/soc/meson/axg-fifo.c
+++ b/sound/soc/meson/axg-fifo.c
@@ -204,18 +204,26 @@ static irqreturn_t axg_fifo_pcm_irq_block(int irq, void *dev_id)
 	unsigned int status;
 
 	regmap_read(fifo->map, FIFO_STATUS1, &status);
-
 	status = FIELD_GET(STATUS1_INT_STS, status);
+	axg_fifo_ack_irq(fifo, status);
+
+	/* Use the thread to call period elapsed on nonatomic links */
 	if (status & FIFO_INT_COUNT_REPEAT)
-		snd_pcm_period_elapsed(ss);
-	else
-		dev_dbg(axg_fifo_dev(ss), "unexpected irq - STS 0x%02x\n",
-			status);
+		return IRQ_WAKE_THREAD;
 
-	/* Ack irqs */
-	axg_fifo_ack_irq(fifo, status);
+	dev_dbg(axg_fifo_dev(ss), "unexpected irq - STS 0x%02x\n",
+		status);
+
+	return IRQ_NONE;
+}
+
+static irqreturn_t axg_fifo_pcm_irq_block_thread(int irq, void *dev_id)
+{
+	struct snd_pcm_substream *ss = dev_id;
+
+	snd_pcm_period_elapsed(ss);
 
-	return IRQ_RETVAL(status);
+	return IRQ_HANDLED;
 }
 
 int axg_fifo_pcm_open(struct snd_soc_component *component,
@@ -243,8 +251,9 @@ int axg_fifo_pcm_open(struct snd_soc_component *component,
 	if (ret)
 		return ret;
 
-	ret = request_irq(fifo->irq, axg_fifo_pcm_irq_block, 0,
-			  dev_name(dev), ss);
+	ret = request_threaded_irq(fifo->irq, axg_fifo_pcm_irq_block,
+				   axg_fifo_pcm_irq_block_thread,
+				   IRQF_ONESHOT, dev_name(dev), ss);
 	if (ret)
 		return ret;
 
-- 
2.43.0

[PATCH 5.15 044/168] ASoC: meson: axg-card: make links nonatomic

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit e138233e56e9829e65b6293887063a1a3ccb2d68 ]

Non atomic operations need to be performed in the trigger callback
of the TDM interfaces. Those are BEs but what matters is the nonatomic
flag of the FE in the DPCM context. Just set nonatomic for everything so,
at least, it is clear.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20211020114217.133153-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/axg-card.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/meson/axg-card.c b/sound/soc/meson/axg-card.c
index 2b77010c2c5ce..cbbaa55d92a66 100644
--- a/sound/soc/meson/axg-card.c
+++ b/sound/soc/meson/axg-card.c
@@ -320,6 +320,7 @@ static int axg_card_add_link(struct snd_soc_card *card, struct device_node *np,
 
 	dai_link->cpus = cpu;
 	dai_link->num_cpus = 1;
+	dai_link->nonatomic = true;
 
 	ret = meson_card_parse_dai(card, np, &dai_link->cpus->of_node,
 				   &dai_link->cpus->dai_name);
-- 
2.43.0

[PATCH 5.15 045/168] ASoC: meson: axg-tdm-interface: manage formatters in trigger

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit bf5e4887eeddb48480568466536aa08ec7f179a5 ]

So far, the formatters have been reset/enabled using the .prepare()
callback. This was done in this callback because walking the formatters use
a mutex so it could not be done in .trigger(), which is atomic by default.

It turns out there is a problem on capture path of the AXG series.
The FIFO may get out of sync with the TDM decoder if the IP are not enabled
in a specific order. The FIFO must be enabled before the formatter starts
producing data. IOW, we must deal with FE before the BE. The .prepare()
callback is called on the BEs before the FE so it is not OK for the AXG.

The .trigger() callback order can be configured, and it deals with the FE
before the BEs by default. To solve our problem, we just need to start and
stop the formatters from the .trigger() callback. It is OK do so now that
the links have been made 'nonatomic' in the card driver.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20211020114217.133153-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/axg-tdm-interface.c | 26 +++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)

diff --git a/sound/soc/meson/axg-tdm-interface.c b/sound/soc/meson/axg-tdm-interface.c
index 60d132ab1ab78..f5145902360de 100644
--- a/sound/soc/meson/axg-tdm-interface.c
+++ b/sound/soc/meson/axg-tdm-interface.c
@@ -362,13 +362,29 @@ static int axg_tdm_iface_hw_free(struct snd_pcm_substream *substream,
 	return 0;
 }
 
-static int axg_tdm_iface_prepare(struct snd_pcm_substream *substream,
+static int axg_tdm_iface_trigger(struct snd_pcm_substream *substream,
+				 int cmd,
 				 struct snd_soc_dai *dai)
 {
-	struct axg_tdm_stream *ts = snd_soc_dai_get_dma_data(dai, substream);
+	struct axg_tdm_stream *ts =
+		snd_soc_dai_get_dma_data(dai, substream);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		axg_tdm_stream_start(ts);
+		break;
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+	case SNDRV_PCM_TRIGGER_STOP:
+		axg_tdm_stream_stop(ts);
+		break;
+	default:
+		return -EINVAL;
+	}
 
-	/* Force all attached formatters to update */
-	return axg_tdm_stream_reset(ts);
+	return 0;
 }
 
 static int axg_tdm_iface_remove_dai(struct snd_soc_dai *dai)
@@ -408,8 +424,8 @@ static const struct snd_soc_dai_ops axg_tdm_iface_ops = {
 	.set_fmt	= axg_tdm_iface_set_fmt,
 	.startup	= axg_tdm_iface_startup,
 	.hw_params	= axg_tdm_iface_hw_params,
-	.prepare	= axg_tdm_iface_prepare,
 	.hw_free	= axg_tdm_iface_hw_free,
+	.trigger	= axg_tdm_iface_trigger,
 };
 
 /* TDM Backend DAIs */
-- 
2.43.0

[PATCH 5.15 046/168] ASoC: meson: cards: select SND_DYNAMIC_MINORS

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 6db26f9ea4edd8a17d39ab3c20111e3ccd704aef ]

Amlogic sound cards do create a lot of pcm interfaces, possibly more than
8. Some pcm interfaces are internal (like DPCM backends and c2c) and not
exposed to userspace.

Those interfaces still increase the number passed to snd_find_free_minor(),
which eventually exceeds 8 causing -EBUSY error on card registration if
CONFIG_SND_DYNAMIC_MINORS=n and the interface is exposed to userspace.

select CONFIG_SND_DYNAMIC_MINORS for Amlogic cards to avoid the problem.

Fixes: 7864a79f37b5 ("ASoC: meson: add axg sound card support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426134150.3053741-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig
index b93ea33739f29..6458d5dc4902f 100644
--- a/sound/soc/meson/Kconfig
+++ b/sound/soc/meson/Kconfig
@@ -99,6 +99,7 @@ config SND_MESON_AXG_PDM
 
 config SND_MESON_CARD_UTILS
 	tristate
+	select SND_DYNAMIC_MINORS
 
 config SND_MESON_CODEC_GLUE
 	tristate
-- 
2.43.0

[PATCH 5.15 047/168] ALSA: hda: intel-sdw-acpi: fix usage of device_get_named_child_node()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit c158cf914713efc3bcdc25680c7156c48c12ef6a ]

The documentation for device_get_named_child_node() mentions this
important point:

"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"

Add fwnode_handle_put() to avoid a leaked reference.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Fixes: 08c2a4bc9f2a ("ALSA: hda: move Intel SoundWire ACPI scan to dedicated module")
Message-ID: <20240426152731.38420-1-pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/hda/intel-sdw-acpi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/hda/intel-sdw-acpi.c b/sound/hda/intel-sdw-acpi.c
index b7758dbe23714..7c1e47aa4e7a7 100644
--- a/sound/hda/intel-sdw-acpi.c
+++ b/sound/hda/intel-sdw-acpi.c
@@ -41,6 +41,8 @@ static bool is_link_enabled(struct fwnode_handle *fw_node, int i)
 				 "intel-quirk-mask",
 				 &quirk_mask);
 
+	fwnode_handle_put(link);
+
 	if (quirk_mask & SDW_INTEL_QUIRK_MASK_BUS_DISABLE)
 		return false;
 
-- 
2.43.0

[PATCH 5.15 048/168] s390/cio: Ensure the copied buf is NUL terminated

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bui Quang Minh <minhquangbui99@gmail.com>

[ Upstream commit da7c622cddd4fe36be69ca61e8c42e43cde94784 ]

Currently, we allocate a lbuf-sized kernel buffer and copy lbuf from
userspace to that buffer. Later, we use scanf on this buffer but we don't
ensure that the string is terminated inside the buffer, this can lead to
OOB read when using scanf. Fix this issue by using memdup_user_nul instead.

Fixes: a4f17cc72671 ("s390/cio: add CRW inject functionality")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-5-f1f1b53a10f4@gmail.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/cio/cio_inject.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/s390/cio/cio_inject.c b/drivers/s390/cio/cio_inject.c
index 8613fa937237b..a2e771ebae8eb 100644
--- a/drivers/s390/cio/cio_inject.c
+++ b/drivers/s390/cio/cio_inject.c
@@ -95,7 +95,7 @@ static ssize_t crw_inject_write(struct file *file, const char __user *buf,
 		return -EINVAL;
 	}
 
-	buffer = vmemdup_user(buf, lbuf);
+	buffer = memdup_user_nul(buf, lbuf);
 	if (IS_ERR(buffer))
 		return -ENOMEM;
 
-- 
2.43.0

[PATCH 5.15 049/168] cxgb4: Properly lock TX queue for the selftest.

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

[ Upstream commit 9067eccdd7849dd120d5495dbd5a686fa6ed2c1a ]

The selftest for the driver sends a dummy packet and checks if the
packet will be received properly as it should be. The regular TX path
and the selftest can use the same network queue so locking is required
and was missing in the selftest path. This was addressed in the commit
cited below.
Unfortunately locking the TX queue requires BH to be disabled which is
not the case in selftest path which is invoked in process context.
Lockdep should be complaining about this.

Use __netif_tx_lock_bh() for TX queue locking.

Fixes: c650e04898072 ("cxgb4: Fix race between loopback and normal Tx path")
Reported-by: "John B. Wyatt IV" <jwyatt@redhat.com>
Closes: https://lore.kernel.org/all/Zic0ot5aGgR-V4Ks@thinkpad2021/
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240429091147.YWAaal4v@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb4/sge.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index fa5b596ff23a1..a074e9d44277f 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -2682,12 +2682,12 @@ int cxgb4_selftest_lb_pkt(struct net_device *netdev)
 	lb->loopback = 1;
 
 	q = &adap->sge.ethtxq[pi->first_qset];
-	__netif_tx_lock(q->txq, smp_processor_id());
+	__netif_tx_lock_bh(q->txq);
 
 	reclaim_completed_tx(adap, &q->q, -1, true);
 	credits = txq_avail(&q->q) - ndesc;
 	if (unlikely(credits < 0)) {
-		__netif_tx_unlock(q->txq);
+		__netif_tx_unlock_bh(q->txq);
 		return -ENOMEM;
 	}
 
@@ -2722,7 +2722,7 @@ int cxgb4_selftest_lb_pkt(struct net_device *netdev)
 	init_completion(&lb->completion);
 	txq_advance(&q->q, ndesc);
 	cxgb4_ring_tx_db(adap, &q->q, ndesc);
-	__netif_tx_unlock(q->txq);
+	__netif_tx_unlock_bh(q->txq);
 
 	/* wait for the pkt to return */
 	ret = wait_for_completion_timeout(&lb->completion, 10 * HZ);
-- 
2.43.0

[PATCH 5.15 050/168] net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Behún <kabel@kernel.org>

[ Upstream commit b9a61c20179fda7bdfe2c1210aa72451991ab81a ]

The Topaz family (88E6141 and 88E6341) only support 256 Forwarding
Information Tables.

Fixes: a75961d0ebfd ("net: dsa: mv88e6xxx: Add support for ethernet switch 88E6341")
Fixes: 1558727a1c1b ("net: dsa: mv88e6xxx: Add support for ethernet switch 88E6141")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240429133832.9547-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 30fba1ea933e3..3fc120802883a 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -5116,7 +5116,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
 		.prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6141,
 		.family = MV88E6XXX_FAMILY_6341,
 		.name = "Marvell 88E6141",
-		.num_databases = 4096,
+		.num_databases = 256,
 		.num_macs = 2048,
 		.num_ports = 6,
 		.num_internal_phys = 5,
@@ -5559,7 +5559,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
 		.prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6341,
 		.family = MV88E6XXX_FAMILY_6341,
 		.name = "Marvell 88E6341",
-		.num_databases = 4096,
+		.num_databases = 256,
 		.num_macs = 2048,
 		.num_internal_phys = 5,
 		.num_ports = 6,
-- 
2.43.0

[PATCH 5.15 051/168] net: bridge: fix multicast-to-unicast with fraglist GSO

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 59c878cbcdd80ed39315573b3511d0acfd3501b5 ]

Calling skb_copy on a SKB_GSO_FRAGLIST skb is not valid, since it returns
an invalid linearized skb. This code only needs to change the ethernet
header, so pskb_copy is the right function to call here.

Fixes: 6db6f0eae605 ("bridge: multicast to unicast")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bridge/br_forward.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c
index 011bd3c59da19..0bdd2892646db 100644
--- a/net/bridge/br_forward.c
+++ b/net/bridge/br_forward.c
@@ -261,7 +261,7 @@ static void maybe_deliver_addr(struct net_bridge_port *p, struct sk_buff *skb,
 	if (skb->dev == p->dev && ether_addr_equal(src, addr))
 		return;
 
-	skb = skb_copy(skb, GFP_ATOMIC);
+	skb = pskb_copy(skb, GFP_ATOMIC);
 	if (!skb) {
 		DEV_STATS_INC(dev, tx_dropped);
 		return;
-- 
2.43.0

[PATCH 5.15 052/168] net: core: reject skb_copy(_expand) for fraglist GSO skbs

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit d091e579b864fa790dd6a0cd537a22c383126681 ]

SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become
invalid. Return NULL if such an skb is passed to skb_copy or
skb_copy_expand, in order to prevent a crash on a potential later
call to skb_gso_segment.

Fixes: 3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/skbuff.c | 27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)

diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index a42431860af9a..4ec8cfd357eba 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -1583,11 +1583,17 @@ static inline int skb_alloc_rx_flag(const struct sk_buff *skb)
 
 struct sk_buff *skb_copy(const struct sk_buff *skb, gfp_t gfp_mask)
 {
-	int headerlen = skb_headroom(skb);
-	unsigned int size = skb_end_offset(skb) + skb->data_len;
-	struct sk_buff *n = __alloc_skb(size, gfp_mask,
-					skb_alloc_rx_flag(skb), NUMA_NO_NODE);
+	struct sk_buff *n;
+	unsigned int size;
+	int headerlen;
+
+	if (WARN_ON_ONCE(skb_shinfo(skb)->gso_type & SKB_GSO_FRAGLIST))
+		return NULL;
 
+	headerlen = skb_headroom(skb);
+	size = skb_end_offset(skb) + skb->data_len;
+	n = __alloc_skb(size, gfp_mask,
+			skb_alloc_rx_flag(skb), NUMA_NO_NODE);
 	if (!n)
 		return NULL;
 
@@ -1899,12 +1905,17 @@ struct sk_buff *skb_copy_expand(const struct sk_buff *skb,
 	/*
 	 *	Allocate the copy buffer
 	 */
-	struct sk_buff *n = __alloc_skb(newheadroom + skb->len + newtailroom,
-					gfp_mask, skb_alloc_rx_flag(skb),
-					NUMA_NO_NODE);
-	int oldheadroom = skb_headroom(skb);
 	int head_copy_len, head_copy_off;
+	struct sk_buff *n;
+	int oldheadroom;
+
+	if (WARN_ON_ONCE(skb_shinfo(skb)->gso_type & SKB_GSO_FRAGLIST))
+		return NULL;
 
+	oldheadroom = skb_headroom(skb);
+	n = __alloc_skb(newheadroom + skb->len + newtailroom,
+			gfp_mask, skb_alloc_rx_flag(skb),
+			NUMA_NO_NODE);
 	if (!n)
 		return NULL;
 
-- 
2.43.0

[PATCH 5.15 053/168] tipc: fix a possible memleak in tipc_buf_append

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 97bf6f81b29a8efaf5d0983251a7450e5794370d ]

__skb_linearize() doesn't free the skb when it fails, so move
'*buf = NULL' after __skb_linearize(), so that the skb can be
freed on the err path.

Fixes: b7df21cf1b79 ("tipc: skb_linearize the head skb when reassembling msgs")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/90710748c29a1521efac4f75ea01b3b7e61414cf.1714485818.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/msg.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/tipc/msg.c b/net/tipc/msg.c
index 5c9fd4791c4ba..c52ab423082cd 100644
--- a/net/tipc/msg.c
+++ b/net/tipc/msg.c
@@ -142,9 +142,9 @@ int tipc_buf_append(struct sk_buff **headbuf, struct sk_buff **buf)
 	if (fragid == FIRST_FRAGMENT) {
 		if (unlikely(head))
 			goto err;
-		*buf = NULL;
 		if (skb_has_frag_list(frag) && __skb_linearize(frag))
 			goto err;
+		*buf = NULL;
 		frag = skb_unshare(frag, GFP_ATOMIC);
 		if (unlikely(!frag))
 			goto err;
-- 
2.43.0

[PATCH 5.15 054/168] s390/qeth: dont keep track of Input Queue count

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julian Wiedmann <jwi@linux.ibm.com>

[ Upstream commit dc15012bb083c70502b625cf56fbf32b6cf17fe4 ]

The only actual user of qdio.no_input_queues is qeth_qdio_establish(),
and there we already have full awareness of the current Input Queue
configuration (1 RX queue, plus potentially 1 TX Completion queue).

So avoid this state tracking, and the ambiguity it brings with it.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 8a2e4d37afb8 ("s390/qeth: Fix kernel panic after setting hsuid")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/qeth_core.h      |  1 -
 drivers/s390/net/qeth_core_main.c | 17 +++++++----------
 2 files changed, 7 insertions(+), 11 deletions(-)

diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index e8c360879883b..71464e9ad4f82 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -545,7 +545,6 @@ static inline bool qeth_out_queue_is_empty(struct qeth_qdio_out_q *queue)
 struct qeth_qdio_info {
 	atomic_t state;
 	/* input */
-	int no_in_queues;
 	struct qeth_qdio_q *in_q;
 	struct qeth_qdio_q *c_q;
 	struct qeth_qdio_buffer_pool in_buf_pool;
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index c1346c4e2242d..9b7f518395e16 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -354,8 +354,8 @@ static int qeth_cq_init(struct qeth_card *card)
 		qdio_reset_buffers(card->qdio.c_q->qdio_bufs,
 				   QDIO_MAX_BUFFERS_PER_Q);
 		card->qdio.c_q->next_buf_to_init = 127;
-		rc = do_QDIO(CARD_DDEV(card), QDIO_FLAG_SYNC_INPUT,
-			     card->qdio.no_in_queues - 1, 0, 127, NULL);
+		rc = do_QDIO(CARD_DDEV(card), QDIO_FLAG_SYNC_INPUT, 1, 0, 127,
+			     NULL);
 		if (rc) {
 			QETH_CARD_TEXT_(card, 2, "1err%d", rc);
 			goto out;
@@ -375,21 +375,16 @@ static int qeth_alloc_cq(struct qeth_card *card)
 			dev_err(&card->gdev->dev, "Failed to create completion queue\n");
 			return -ENOMEM;
 		}
-
-		card->qdio.no_in_queues = 2;
 	} else {
 		QETH_CARD_TEXT(card, 2, "nocq");
 		card->qdio.c_q = NULL;
-		card->qdio.no_in_queues = 1;
 	}
-	QETH_CARD_TEXT_(card, 2, "iqc%d", card->qdio.no_in_queues);
 	return 0;
 }
 
 static void qeth_free_cq(struct qeth_card *card)
 {
 	if (card->qdio.c_q) {
-		--card->qdio.no_in_queues;
 		qeth_free_qdio_queue(card->qdio.c_q);
 		card->qdio.c_q = NULL;
 	}
@@ -1492,7 +1487,6 @@ static void qeth_init_qdio_info(struct qeth_card *card)
 	card->qdio.default_out_queue = QETH_DEFAULT_QUEUE;
 
 	/* inbound */
-	card->qdio.no_in_queues = 1;
 	card->qdio.in_buf_size = QETH_IN_BUF_SIZE_DEFAULT;
 	if (IS_IQD(card))
 		card->qdio.init_pool.buf_count = QETH_IN_BUF_COUNT_HSDEFAULT;
@@ -5173,6 +5167,7 @@ static int qeth_qdio_establish(struct qeth_card *card)
 	struct qdio_buffer **in_sbal_ptrs[QETH_MAX_IN_QUEUES];
 	struct qeth_qib_parms *qib_parms = NULL;
 	struct qdio_initialize init_data;
+	unsigned int no_input_qs = 1;
 	unsigned int i;
 	int rc = 0;
 
@@ -5187,8 +5182,10 @@ static int qeth_qdio_establish(struct qeth_card *card)
 	}
 
 	in_sbal_ptrs[0] = card->qdio.in_q->qdio_bufs;
-	if (card->options.cq == QETH_CQ_ENABLED)
+	if (card->options.cq == QETH_CQ_ENABLED) {
 		in_sbal_ptrs[1] = card->qdio.c_q->qdio_bufs;
+		no_input_qs++;
+	}
 
 	for (i = 0; i < card->qdio.no_out_queues; i++)
 		out_sbal_ptrs[i] = card->qdio.out_qs[i]->qdio_bufs;
@@ -5198,7 +5195,7 @@ static int qeth_qdio_establish(struct qeth_card *card)
 							  QDIO_QETH_QFMT;
 	init_data.qib_param_field_format = 0;
 	init_data.qib_param_field	 = (void *)qib_parms;
-	init_data.no_input_qs            = card->qdio.no_in_queues;
+	init_data.no_input_qs		 = no_input_qs;
 	init_data.no_output_qs           = card->qdio.no_out_queues;
 	init_data.input_handler		 = qeth_qdio_input_handler;
 	init_data.output_handler	 = qeth_qdio_output_handler;
-- 
2.43.0

[PATCH 5.15 055/168] s390/qeth: Fix kernel panic after setting hsuid

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandra Winter <wintera@linux.ibm.com>

[ Upstream commit 8a2e4d37afb8500b276e5ee903dee06f50ab0494 ]

Symptom:
When the hsuid attribute is set for the first time on an IQD Layer3
device while the corresponding network interface is already UP,
the kernel will try to execute a napi function pointer that is NULL.

Example:
---------------------------------------------------------------------------
[ 2057.572696] illegal operation: 0001 ilc:1 [#1] SMP
[ 2057.572702] Modules linked in: af_iucv qeth_l3 zfcp scsi_transport_fc sunrpc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6
nft_reject nft_ct nf_tables_set nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink ghash_s390 prng xts aes_s390 des_s390 de
s_generic sha3_512_s390 sha3_256_s390 sha512_s390 vfio_ccw vfio_mdev mdev vfio_iommu_type1 eadm_sch vfio ext4 mbcache jbd2 qeth_l2 bridge stp llc dasd_eckd_mod qeth dasd_mod
 qdio ccwgroup pkey zcrypt
[ 2057.572739] CPU: 6 PID: 60182 Comm: stress_client Kdump: loaded Not tainted 4.18.0-541.el8.s390x #1
[ 2057.572742] Hardware name: IBM 3931 A01 704 (LPAR)
[ 2057.572744] Krnl PSW : 0704f00180000000 0000000000000002 (0x2)
[ 2057.572748]            R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3
[ 2057.572751] Krnl GPRS: 0000000000000004 0000000000000000 00000000a3b008d8 0000000000000000
[ 2057.572754]            00000000a3b008d8 cb923a29c779abc5 0000000000000000 00000000814cfd80
[ 2057.572756]            000000000000012c 0000000000000000 00000000a3b008d8 00000000a3b008d8
[ 2057.572758]            00000000bab6d500 00000000814cfd80 0000000091317e46 00000000814cfc68
[ 2057.572762] Krnl Code:#0000000000000000: 0000                illegal
                         >0000000000000002: 0000                illegal
                          0000000000000004: 0000                illegal
                          0000000000000006: 0000                illegal
                          0000000000000008: 0000                illegal
                          000000000000000a: 0000                illegal
                          000000000000000c: 0000                illegal
                          000000000000000e: 0000                illegal
[ 2057.572800] Call Trace:
[ 2057.572801] ([<00000000ec639700>] 0xec639700)
[ 2057.572803]  [<00000000913183e2>] net_rx_action+0x2ba/0x398
[ 2057.572809]  [<0000000091515f76>] __do_softirq+0x11e/0x3a0
[ 2057.572813]  [<0000000090ce160c>] do_softirq_own_stack+0x3c/0x58
[ 2057.572817] ([<0000000090d2cbd6>] do_softirq.part.1+0x56/0x60)
[ 2057.572822]  [<0000000090d2cc60>] __local_bh_enable_ip+0x80/0x98
[ 2057.572825]  [<0000000091314706>] __dev_queue_xmit+0x2be/0xd70
[ 2057.572827]  [<000003ff803dd6d6>] afiucv_hs_send+0x24e/0x300 [af_iucv]
[ 2057.572830]  [<000003ff803dd88a>] iucv_send_ctrl+0x102/0x138 [af_iucv]
[ 2057.572833]  [<000003ff803de72a>] iucv_sock_connect+0x37a/0x468 [af_iucv]
[ 2057.572835]  [<00000000912e7e90>] __sys_connect+0xa0/0xd8
[ 2057.572839]  [<00000000912e9580>] sys_socketcall+0x228/0x348
[ 2057.572841]  [<0000000091514e1a>] system_call+0x2a6/0x2c8
[ 2057.572843] Last Breaking-Event-Address:
[ 2057.572844]  [<0000000091317e44>] __napi_poll+0x4c/0x1d8
[ 2057.572846]
[ 2057.572847] Kernel panic - not syncing: Fatal exception in interrupt
-------------------------------------------------------------------------------------------

Analysis:
There is one napi structure per out_q: card->qdio.out_qs[i].napi
The napi.poll functions are set during qeth_open().

Since
commit 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)")
qeth_set_offline()/qeth_set_online() no longer call dev_close()/
dev_open(). So if qeth_free_qdio_queues() cleared
card->qdio.out_qs[i].napi.poll while the network interface was UP and the
card was offline, they are not set again.

Reproduction:
chzdev -e $devno layer2=0
ip link set dev $network_interface up
echo 0 > /sys/bus/ccwgroup/devices/0.0.$devno/online
echo foo > /sys/bus/ccwgroup/devices/0.0.$devno/hsuid
echo 1 > /sys/bus/ccwgroup/devices/0.0.$devno/online
-> Crash (can be enforced e.g. by af_iucv connect(), ip link down/up, ...)

Note that a Completion Queue (CQ) is only enabled or disabled, when hsuid
is set for the first time or when it is removed.

Workarounds:
- Set hsuid before setting the device online for the first time
or
- Use chzdev -d $devno; chzdev $devno hsuid=xxx; chzdev -e $devno;
to set hsuid on an existing device. (this will remove and recreate the
network interface)

Fix:
There is no need to free the output queues when a completion queue is
added or removed.
card->qdio.state now indicates whether the inbound buffer pool and the
outbound queues are allocated.
card->qdio.c_q indicates whether a CQ is allocated.

Fixes: 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240430091004.2265683-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/qeth_core_main.c | 61 ++++++++++++++-----------------
 1 file changed, 27 insertions(+), 34 deletions(-)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 9b7f518395e16..5c69cba6459f2 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -366,30 +366,33 @@ static int qeth_cq_init(struct qeth_card *card)
 	return rc;
 }
 
+static void qeth_free_cq(struct qeth_card *card)
+{
+	if (card->qdio.c_q) {
+		qeth_free_qdio_queue(card->qdio.c_q);
+		card->qdio.c_q = NULL;
+	}
+}
+
 static int qeth_alloc_cq(struct qeth_card *card)
 {
 	if (card->options.cq == QETH_CQ_ENABLED) {
 		QETH_CARD_TEXT(card, 2, "cqon");
-		card->qdio.c_q = qeth_alloc_qdio_queue();
 		if (!card->qdio.c_q) {
-			dev_err(&card->gdev->dev, "Failed to create completion queue\n");
-			return -ENOMEM;
+			card->qdio.c_q = qeth_alloc_qdio_queue();
+			if (!card->qdio.c_q) {
+				dev_err(&card->gdev->dev,
+					"Failed to create completion queue\n");
+				return -ENOMEM;
+			}
 		}
 	} else {
 		QETH_CARD_TEXT(card, 2, "nocq");
-		card->qdio.c_q = NULL;
+		qeth_free_cq(card);
 	}
 	return 0;
 }
 
-static void qeth_free_cq(struct qeth_card *card)
-{
-	if (card->qdio.c_q) {
-		qeth_free_qdio_queue(card->qdio.c_q);
-		card->qdio.c_q = NULL;
-	}
-}
-
 static enum iucv_tx_notify qeth_compute_cq_notification(int sbalf15,
 							int delayed)
 {
@@ -2586,6 +2589,10 @@ static int qeth_alloc_qdio_queues(struct qeth_card *card)
 
 	QETH_CARD_TEXT(card, 2, "allcqdbf");
 
+	/* completion */
+	if (qeth_alloc_cq(card))
+		goto out_err;
+
 	if (atomic_cmpxchg(&card->qdio.state, QETH_QDIO_UNINITIALIZED,
 		QETH_QDIO_ALLOCATED) != QETH_QDIO_UNINITIALIZED)
 		return 0;
@@ -2626,10 +2633,6 @@ static int qeth_alloc_qdio_queues(struct qeth_card *card)
 		queue->priority = QETH_QIB_PQUE_PRIO_DEFAULT;
 	}
 
-	/* completion */
-	if (qeth_alloc_cq(card))
-		goto out_freeoutq;
-
 	return 0;
 
 out_freeoutq:
@@ -2643,6 +2646,8 @@ static int qeth_alloc_qdio_queues(struct qeth_card *card)
 	card->qdio.in_q = NULL;
 out_nomem:
 	atomic_set(&card->qdio.state, QETH_QDIO_UNINITIALIZED);
+	qeth_free_cq(card);
+out_err:
 	return -ENOMEM;
 }
 
@@ -2650,11 +2655,12 @@ static void qeth_free_qdio_queues(struct qeth_card *card)
 {
 	int i, j;
 
+	qeth_free_cq(card);
+
 	if (atomic_xchg(&card->qdio.state, QETH_QDIO_UNINITIALIZED) ==
 		QETH_QDIO_UNINITIALIZED)
 		return;
 
-	qeth_free_cq(card);
 	for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; ++j) {
 		if (card->qdio.in_q->bufs[j].rx_skb)
 			dev_kfree_skb_any(card->qdio.in_q->bufs[j].rx_skb);
@@ -3707,24 +3713,11 @@ static void qeth_qdio_poll(struct ccw_device *cdev, unsigned long card_ptr)
 
 int qeth_configure_cq(struct qeth_card *card, enum qeth_cq cq)
 {
-	int rc;
-
-	if (card->options.cq ==  QETH_CQ_NOTAVAILABLE) {
-		rc = -1;
-		goto out;
-	} else {
-		if (card->options.cq == cq) {
-			rc = 0;
-			goto out;
-		}
-
-		qeth_free_qdio_queues(card);
-		card->options.cq = cq;
-		rc = 0;
-	}
-out:
-	return rc;
+	if (card->options.cq == QETH_CQ_NOTAVAILABLE)
+		return -1;
 
+	card->options.cq = cq;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(qeth_configure_cq);
 
-- 
2.43.0

[PATCH 5.15 056/168] drm/panel: ili9341: Respect deferred probe

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 740fc1e0509be3f7e2207e89125b06119ed62943 ]

GPIO controller might not be available when driver is being probed.
There are plenty of reasons why, one of which is deferred probe.

Since GPIOs are optional, return any error code we got to the upper
layer, including deferred probe. With that in mind, use dev_err_probe()
in order to avoid spamming the logs.

Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://lore.kernel.org/r/20240425142706.2440113-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9341.c b/drivers/gpu/drm/panel/panel-ilitek-ili9341.c
index e1542451ef9d0..f8afa922fe9ca 100644
--- a/drivers/gpu/drm/panel/panel-ilitek-ili9341.c
+++ b/drivers/gpu/drm/panel/panel-ilitek-ili9341.c
@@ -716,11 +716,11 @@ static int ili9341_probe(struct spi_device *spi)
 
 	reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(reset))
-		dev_err(dev, "Failed to get gpio 'reset'\n");
+		return dev_err_probe(dev, PTR_ERR(reset), "Failed to get gpio 'reset'\n");
 
 	dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW);
 	if (IS_ERR(dc))
-		dev_err(dev, "Failed to get gpio 'dc'\n");
+		return dev_err_probe(dev, PTR_ERR(dc), "Failed to get gpio 'dc'\n");
 
 	if (!strcmp(id->name, "sf-tc240t-9370-t"))
 		return ili9341_dpi_probe(spi, dc, reset);
-- 
2.43.0

[PATCH 5.15 057/168] drm/panel: ili9341: Use predefined error codes

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit da85f0aaa9f21999753b01d45c0343f885a8f905 ]

In one case the -1 is returned which is quite confusing code for
the wrong device ID, in another the ret is returning instead of
plain 0 that also confusing as readed may ask the possible meaning
of positive codes, which are never the case there. Convert both
to use explicit predefined error codes to make it clear what's going
on there.

Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://lore.kernel.org/r/20240425142706.2440113-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9341.c b/drivers/gpu/drm/panel/panel-ilitek-ili9341.c
index f8afa922fe9ca..0d89779de22b0 100644
--- a/drivers/gpu/drm/panel/panel-ilitek-ili9341.c
+++ b/drivers/gpu/drm/panel/panel-ilitek-ili9341.c
@@ -420,7 +420,7 @@ static int ili9341_dpi_prepare(struct drm_panel *panel)
 
 	ili9341_dpi_init(ili);
 
-	return ret;
+	return 0;
 }
 
 static int ili9341_dpi_enable(struct drm_panel *panel)
@@ -727,7 +727,7 @@ static int ili9341_probe(struct spi_device *spi)
 	else if (!strcmp(id->name, "yx240qv29"))
 		return ili9341_dbi_probe(spi, dc, reset);
 
-	return -1;
+	return -ENODEV;
 }
 
 static int ili9341_remove(struct spi_device *spi)
-- 
2.43.0

[PATCH 5.15 058/168] net: gro: add flush check in udp_gro_receive_segment

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Gobert <richardbgobert@gmail.com>

[ Upstream commit 5babae777c61aa8a8679d59d3cdc54165ad96d42 ]

GRO-GSO path is supposed to be transparent and as such L3 flush checks are
relevant to all UDP flows merging in GRO. This patch uses the same logic
and code from tcp_gro_receive, terminating merge if flush is non zero.

Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/udp_offload.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/udp_offload.c b/net/ipv4/udp_offload.c
index 7c6ac47b0bb18..c61268849948a 100644
--- a/net/ipv4/udp_offload.c
+++ b/net/ipv4/udp_offload.c
@@ -434,6 +434,7 @@ static struct sk_buff *udp_gro_receive_segment(struct list_head *head,
 	struct sk_buff *p;
 	unsigned int ulen;
 	int ret = 0;
+	int flush;
 
 	/* requires non zero csum, for symmetry with GSO */
 	if (!uh->check) {
@@ -467,13 +468,22 @@ static struct sk_buff *udp_gro_receive_segment(struct list_head *head,
 			return p;
 		}
 
+		flush = NAPI_GRO_CB(p)->flush;
+
+		if (NAPI_GRO_CB(p)->flush_id != 1 ||
+		    NAPI_GRO_CB(p)->count != 1 ||
+		    !NAPI_GRO_CB(p)->is_atomic)
+			flush |= NAPI_GRO_CB(p)->flush_id;
+		else
+			NAPI_GRO_CB(p)->is_atomic = false;
+
 		/* Terminate the flow on len mismatch or if it grow "too much".
 		 * Under small packet flood GRO count could elsewhere grow a lot
 		 * leading to excessive truesize values.
 		 * On len mismatch merge the first packet shorter than gso_size,
 		 * otherwise complete the GRO packet.
 		 */
-		if (ulen > ntohs(uh2->len)) {
+		if (ulen > ntohs(uh2->len) || flush) {
 			pp = p;
 		} else {
 			if (NAPI_GRO_CB(skb)->is_flist) {
-- 
2.43.0

[PATCH 5.15 059/168] clk: sunxi-ng: h6: Reparent CPUX during PLL CPUX rate change

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jernej Skrabec <jernej.skrabec@gmail.com>

[ Upstream commit 7e91ed763dc07437777bd012af7a2bd4493731ff ]

While PLL CPUX clock rate change when CPU is running from it works in
vast majority of cases, now and then it causes instability. This leads
to system crashes and other undefined behaviour. After a lot of testing
(30+ hours) while also doing a lot of frequency switches, we can't
observe any instability issues anymore when doing reparenting to stable
clock like 24 MHz oscillator.

Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
Reported-by: Chad Wagner <wagnerch42@gmail.com>
Link: https://forum.libreelec.tv/thread/27295-orange-pi-3-lts-freezes/
Tested-by: Chad Wagner <wagnerch42@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20231013181712.2128037-1-jernej.skrabec@gmail.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
index c0800da2fa3d7..736a781e4007a 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
@@ -1181,12 +1181,19 @@ static const u32 usb2_clk_regs[] = {
 	SUN50I_H6_USB3_CLK_REG,
 };
 
+static struct ccu_mux_nb sun50i_h6_cpu_nb = {
+	.common		= &cpux_clk.common,
+	.cm		= &cpux_clk.mux,
+	.delay_us       = 1,
+	.bypass_index   = 0, /* index of 24 MHz oscillator */
+};
+
 static int sun50i_h6_ccu_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	void __iomem *reg;
+	int i, ret;
 	u32 val;
-	int i;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	reg = devm_ioremap_resource(&pdev->dev, res);
@@ -1240,7 +1247,15 @@ static int sun50i_h6_ccu_probe(struct platform_device *pdev)
 	val |= BIT(24);
 	writel(val, reg + SUN50I_H6_HDMI_CEC_CLK_REG);
 
-	return devm_sunxi_ccu_probe(&pdev->dev, reg, &sun50i_h6_ccu_desc);
+	ret = devm_sunxi_ccu_probe(&pdev->dev, reg, &sun50i_h6_ccu_desc);
+	if (ret)
+		return ret;
+
+	/* Reparent CPU during PLL CPUX rate changes */
+	ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
+				  &sun50i_h6_cpu_nb);
+
+	return 0;
 }
 
 static const struct of_device_id sun50i_h6_ccu_ids[] = {
-- 
2.43.0

[PATCH 5.15 060/168] KVM: arm64: vgic-v2: Use cpuid from userspace as vcpu_id

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit 4e7728c81a54b17bd33be402ac140bc11bb0c4f4 ]

When parsing a GICv2 attribute that contains a cpuid, handle this
as the vcpu_id, not a vcpu_idx, as userspace cannot really know
the mapping between the two. For this, use kvm_get_vcpu_by_id()
instead of kvm_get_vcpu().

Take this opportunity to get rid of the pointless check against
online_vcpus, which doesn't make much sense either, and switch
to FIELD_GET as a way to extract the vcpu_id.

Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230927090911.3355209-5-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Stable-dep-of: 6ddb4f372fc6 ("KVM: arm64: vgic-v2: Check for non-NULL vCPU in vgic_v2_parse_attr()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kvm/vgic/vgic-kvm-device.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/kvm/vgic/vgic-kvm-device.c b/arch/arm64/kvm/vgic/vgic-kvm-device.c
index 7740995de982e..640cfa0c0f4cc 100644
--- a/arch/arm64/kvm/vgic/vgic-kvm-device.c
+++ b/arch/arm64/kvm/vgic/vgic-kvm-device.c
@@ -286,13 +286,9 @@ int vgic_v2_parse_attr(struct kvm_device *dev, struct kvm_device_attr *attr,
 {
 	int cpuid;
 
-	cpuid = (attr->attr & KVM_DEV_ARM_VGIC_CPUID_MASK) >>
-		 KVM_DEV_ARM_VGIC_CPUID_SHIFT;
+	cpuid = FIELD_GET(KVM_DEV_ARM_VGIC_CPUID_MASK, attr->attr);
 
-	if (cpuid >= atomic_read(&dev->kvm->online_vcpus))
-		return -EINVAL;
-
-	reg_attr->vcpu = kvm_get_vcpu(dev->kvm, cpuid);
+	reg_attr->vcpu = kvm_get_vcpu_by_id(dev->kvm, cpuid);
 	reg_attr->addr = attr->attr & KVM_DEV_ARM_VGIC_OFFSET_MASK;
 
 	return 0;
-- 
2.43.0

[PATCH 5.15 061/168] KVM: arm64: vgic-v2: Check for non-NULL vCPU in vgic_v2_parse_attr()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Upton <oliver.upton@linux.dev>

[ Upstream commit 6ddb4f372fc63210034b903d96ebbeb3c7195adb ]

vgic_v2_parse_attr() is responsible for finding the vCPU that matches
the user-provided CPUID, which (of course) may not be valid. If the ID
is invalid, kvm_get_vcpu_by_id() returns NULL, which isn't handled
gracefully.

Similar to the GICv3 uaccess flow, check that kvm_get_vcpu_by_id()
actually returns something and fail the ioctl if not.

Cc: stable@vger.kernel.org
Fixes: 7d450e282171 ("KVM: arm/arm64: vgic-new: Add userland access to VGIC dist registers")
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240424173959.3776798-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kvm/vgic/vgic-kvm-device.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/kvm/vgic/vgic-kvm-device.c b/arch/arm64/kvm/vgic/vgic-kvm-device.c
index 640cfa0c0f4cc..e80b638b78271 100644
--- a/arch/arm64/kvm/vgic/vgic-kvm-device.c
+++ b/arch/arm64/kvm/vgic/vgic-kvm-device.c
@@ -284,12 +284,12 @@ int kvm_register_vgic_device(unsigned long type)
 int vgic_v2_parse_attr(struct kvm_device *dev, struct kvm_device_attr *attr,
 		       struct vgic_reg_attr *reg_attr)
 {
-	int cpuid;
+	int cpuid = FIELD_GET(KVM_DEV_ARM_VGIC_CPUID_MASK, attr->attr);
 
-	cpuid = FIELD_GET(KVM_DEV_ARM_VGIC_CPUID_MASK, attr->attr);
-
-	reg_attr->vcpu = kvm_get_vcpu_by_id(dev->kvm, cpuid);
 	reg_attr->addr = attr->attr & KVM_DEV_ARM_VGIC_OFFSET_MASK;
+	reg_attr->vcpu = kvm_get_vcpu_by_id(dev->kvm, cpuid);
+	if (!reg_attr->vcpu)
+		return -EINVAL;
 
 	return 0;
 }
-- 
2.43.0

[PATCH 5.15 062/168] scsi: lpfc: Move NPIVs transport unregistration to after resource clean up

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Justin Tee <justin.tee@broadcom.com>

[ Upstream commit 4ddf01f2f1504fa08b766e8cfeec558e9f8eef6c ]

There are cases after NPIV deletion where the fabric switch still believes
the NPIV is logged into the fabric.  This occurs when a vport is
unregistered before the Remove All DA_ID CT and LOGO ELS are sent to the
fabric.

Currently fc_remove_host(), which calls dev_loss_tmo for all D_IDs including
the fabric D_ID, removes the last ndlp reference and frees the ndlp rport
object.  This sometimes causes the race condition where the final DA_ID and
LOGO are skipped from being sent to the fabric switch.

Fix by moving the fc_remove_host() and scsi_remove_host() calls after DA_ID
and LOGO are sent.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240305200503.57317-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_vport.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index da9a1f72d9383..b1071226e27fb 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -651,10 +651,6 @@ lpfc_vport_delete(struct fc_vport *fc_vport)
 	lpfc_free_sysfs_attr(vport);
 	lpfc_debugfs_terminate(vport);
 
-	/* Remove FC host to break driver binding. */
-	fc_remove_host(shost);
-	scsi_remove_host(shost);
-
 	/* Send the DA_ID and Fabric LOGO to cleanup Nameserver entries. */
 	ndlp = lpfc_findnode_did(vport, Fabric_DID);
 	if (!ndlp)
@@ -700,6 +696,10 @@ lpfc_vport_delete(struct fc_vport *fc_vport)
 
 skip_logo:
 
+	/* Remove FC host to break driver binding. */
+	fc_remove_host(shost);
+	scsi_remove_host(shost);
+
 	lpfc_cleanup(vport);
 
 	/* Remove scsi host now.  The nodes are cleaned up. */
-- 
2.43.0

[PATCH 5.15 063/168] scsi: lpfc: Update lpfc_ramp_down_queue_handler() logic

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Justin Tee <justin.tee@broadcom.com>

[ Upstream commit bb011631435c705cdeddca68d5c85fd40a4320f9 ]

Typically when an out of resource CQE status is detected, the
lpfc_ramp_down_queue_handler() logic is called to help reduce I/O load by
reducing an sdev's queue_depth.

However, the current lpfc_rampdown_queue_depth() logic does not help reduce
queue_depth.  num_cmd_success is never updated and is always zero, which
means new_queue_depth will always be set to sdev->queue_depth.  So,
new_queue_depth = sdev->queue_depth - new_queue_depth always sets
new_queue_depth to zero.  And, scsi_change_queue_depth(sdev, 0) is
essentially a no-op.

Change the lpfc_ramp_down_queue_handler() logic to set new_queue_depth
equal to sdev->queue_depth subtracted from number of times num_rsrc_err was
incremented.  If num_rsrc_err is >= sdev->queue_depth, then set
new_queue_depth equal to 1.  Eventually, the frequency of Good_Status
frames will signal SCSI upper layer to auto increase the queue_depth back
to the driver default of 64 via scsi_handle_queue_ramp_up().

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240305200503.57317-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc.h      |  1 -
 drivers/scsi/lpfc/lpfc_scsi.c | 13 ++++---------
 2 files changed, 4 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 65ac952b767fb..194825ff1ee80 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1341,7 +1341,6 @@ struct lpfc_hba {
 	unsigned long bit_flags;
 #define	FABRIC_COMANDS_BLOCKED	0
 	atomic_t num_rsrc_err;
-	atomic_t num_cmd_success;
 	unsigned long last_rsrc_error_time;
 	unsigned long last_ramp_down_time;
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 6d1a3cbd6b3c4..d9fb5e09fb53f 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -231,11 +231,10 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba)
 	struct Scsi_Host  *shost;
 	struct scsi_device *sdev;
 	unsigned long new_queue_depth;
-	unsigned long num_rsrc_err, num_cmd_success;
+	unsigned long num_rsrc_err;
 	int i;
 
 	num_rsrc_err = atomic_read(&phba->num_rsrc_err);
-	num_cmd_success = atomic_read(&phba->num_cmd_success);
 
 	/*
 	 * The error and success command counters are global per
@@ -250,20 +249,16 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba)
 		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			shost = lpfc_shost_from_vport(vports[i]);
 			shost_for_each_device(sdev, shost) {
-				new_queue_depth =
-					sdev->queue_depth * num_rsrc_err /
-					(num_rsrc_err + num_cmd_success);
-				if (!new_queue_depth)
-					new_queue_depth = sdev->queue_depth - 1;
+				if (num_rsrc_err >= sdev->queue_depth)
+					new_queue_depth = 1;
 				else
 					new_queue_depth = sdev->queue_depth -
-								new_queue_depth;
+						num_rsrc_err;
 				scsi_change_queue_depth(sdev, new_queue_depth);
 			}
 		}
 	lpfc_destroy_vport_work_array(phba, vports);
 	atomic_set(&phba->num_rsrc_err, 0);
-	atomic_set(&phba->num_cmd_success, 0);
 }
 
 /**
-- 
2.43.0

[PATCH 5.15 064/168] scsi: lpfc: Replace hbalock with ndlp lock in lpfc_nvme_unregister_port()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Justin Tee <justin.tee@broadcom.com>

[ Upstream commit d11272be497e48a8e8f980470eb6b70e92eed0ce ]

The ndlp object update in lpfc_nvme_unregister_port() should be protected
by the ndlp lock rather than hbalock.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240305200503.57317-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_nvme.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c
index 4e0c0b273e5fe..2ff8ace6f78f2 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -2539,9 +2539,9 @@ lpfc_nvme_unregister_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 		/* No concern about the role change on the nvme remoteport.
 		 * The transport will update it.
 		 */
-		spin_lock_irq(&vport->phba->hbalock);
+		spin_lock_irq(&ndlp->lock);
 		ndlp->fc4_xpt_flags |= NVME_XPT_UNREG_WAIT;
-		spin_unlock_irq(&vport->phba->hbalock);
+		spin_unlock_irq(&ndlp->lock);
 
 		/* Don't let the host nvme transport keep sending keep-alives
 		 * on this remoteport. Vport is unloading, no recovery. The
-- 
2.43.0

[PATCH 5.15 065/168] gfs2: Fix invalid metadata access in punch_hole

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Price <anprice@redhat.com>

[ Upstream commit c95346ac918c5badf51b9a7ac58a26d3bd5bb224 ]

In punch_hole(), when the offset lies in the final block for a given
height, there is no hole to punch, but the maximum size check fails to
detect that.  Consequently, punch_hole() will try to punch a hole beyond
the end of the metadata and fail.  Fix the maximum size check.

Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/bmap.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index 0ec1eaf338338..d2011c3c33fc2 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -1704,7 +1704,8 @@ static int punch_hole(struct gfs2_inode *ip, u64 offset, u64 length)
 	struct buffer_head *dibh, *bh;
 	struct gfs2_holder rd_gh;
 	unsigned int bsize_shift = sdp->sd_sb.sb_bsize_shift;
-	u64 lblock = (offset + (1 << bsize_shift) - 1) >> bsize_shift;
+	unsigned int bsize = 1 << bsize_shift;
+	u64 lblock = (offset + bsize - 1) >> bsize_shift;
 	__u16 start_list[GFS2_MAX_META_HEIGHT];
 	__u16 __end_list[GFS2_MAX_META_HEIGHT], *end_list = NULL;
 	unsigned int start_aligned, end_aligned;
@@ -1715,7 +1716,7 @@ static int punch_hole(struct gfs2_inode *ip, u64 offset, u64 length)
 	u64 prev_bnr = 0;
 	__be64 *start, *end;
 
-	if (offset >= maxsize) {
+	if (offset + bsize - 1 >= maxsize) {
 		/*
 		 * The starting point lies beyond the allocated meta-data;
 		 * there are no blocks do deallocate.
-- 
2.43.0

[PATCH 5.15 066/168] wifi: mac80211: fix ieee80211_bss_*_flags kernel-doc

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Johnson <quic_jjohnson@quicinc.com>

[ Upstream commit 774f8841f55d7ac4044c79812691649da203584a ]

Running kernel-doc on ieee80211_i.h flagged the following:
net/mac80211/ieee80211_i.h:145: warning: expecting prototype for enum ieee80211_corrupt_data_flags. Prototype was for enum ieee80211_bss_corrupt_data_flags instead
net/mac80211/ieee80211_i.h:162: warning: expecting prototype for enum ieee80211_valid_data_flags. Prototype was for enum ieee80211_bss_valid_data_flags instead

Fix these warnings.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://msgid.link/20240314-kdoc-ieee80211_i-v1-1-72b91b55b257@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/ieee80211_i.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 21549a440b38c..03f8c8bdab765 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -113,7 +113,7 @@ struct ieee80211_bss {
 };
 
 /**
- * enum ieee80211_corrupt_data_flags - BSS data corruption flags
+ * enum ieee80211_bss_corrupt_data_flags - BSS data corruption flags
  * @IEEE80211_BSS_CORRUPT_BEACON: last beacon frame received was corrupted
  * @IEEE80211_BSS_CORRUPT_PROBE_RESP: last probe response received was corrupted
  *
@@ -126,7 +126,7 @@ enum ieee80211_bss_corrupt_data_flags {
 };
 
 /**
- * enum ieee80211_valid_data_flags - BSS valid data flags
+ * enum ieee80211_bss_valid_data_flags - BSS valid data flags
  * @IEEE80211_BSS_VALID_WMM: WMM/UAPSD data was gathered from non-corrupt IE
  * @IEEE80211_BSS_VALID_RATES: Supported rates were gathered from non-corrupt IE
  * @IEEE80211_BSS_VALID_ERP: ERP flag was gathered from non-corrupt IE
-- 
2.43.0

[PATCH 5.15 067/168] wifi: cfg80211: fix rdev_dump_mpp() arguments order

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Igor Artemiev <Igor.A.Artemiev@mcst.ru>

[ Upstream commit ec50f3114e55406a1aad24b7dfaa1c3f4336d8eb ]

Fix the order of arguments in the TP_ARGS macro
for the rdev_dump_mpp tracepoint event.

Found by Linux Verification Center (linuxtesting.org).

Signed-off-by: Igor Artemiev <Igor.A.Artemiev@mcst.ru>
Link: https://msgid.link/20240311164519.118398-1-Igor.A.Artemiev@mcst.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/trace.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index 19b78d4722834..dafea8bfcf3cb 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -963,7 +963,7 @@ TRACE_EVENT(rdev_get_mpp,
 TRACE_EVENT(rdev_dump_mpp,
 	TP_PROTO(struct wiphy *wiphy, struct net_device *netdev, int _idx,
 		 u8 *dst, u8 *mpp),
-	TP_ARGS(wiphy, netdev, _idx, mpp, dst),
+	TP_ARGS(wiphy, netdev, _idx, dst, mpp),
 	TP_STRUCT__entry(
 		WIPHY_ENTRY
 		NETDEV_ENTRY
-- 
2.43.0

[PATCH 5.15 068/168] net: mark racy access on sk->sk_rcvbuf

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: linke li <lilinke99@qq.com>

[ Upstream commit c2deb2e971f5d9aca941ef13ee05566979e337a4 ]

sk->sk_rcvbuf in __sock_queue_rcv_skb() and __sk_receive_skb() can be
changed by other threads. Mark this as benign using READ_ONCE().

This patch is aimed at reducing the number of benign races reported by
KCSAN in order to focus future debugging effort on harmful races.

Signed-off-by: linke li <lilinke99@qq.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/sock.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/core/sock.c b/net/core/sock.c
index 6f761f3c272aa..62e376f09f957 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -459,7 +459,7 @@ int __sock_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
 	unsigned long flags;
 	struct sk_buff_head *list = &sk->sk_receive_queue;
 
-	if (atomic_read(&sk->sk_rmem_alloc) >= sk->sk_rcvbuf) {
+	if (atomic_read(&sk->sk_rmem_alloc) >= READ_ONCE(sk->sk_rcvbuf)) {
 		atomic_inc(&sk->sk_drops);
 		trace_sock_rcvqueue_full(sk, skb);
 		return -ENOMEM;
@@ -511,7 +511,7 @@ int __sk_receive_skb(struct sock *sk, struct sk_buff *skb,
 
 	skb->dev = NULL;
 
-	if (sk_rcvqueues_full(sk, sk->sk_rcvbuf)) {
+	if (sk_rcvqueues_full(sk, READ_ONCE(sk->sk_rcvbuf))) {
 		atomic_inc(&sk->sk_drops);
 		goto discard_and_relse;
 	}
-- 
2.43.0

[PATCH 5.15 069/168] scsi: bnx2fc: Remove spin_lock_bh while releasing resources after upload

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Saurav Kashyap <skashyap@marvell.com>

[ Upstream commit c214ed2a4dda35b308b0b28eed804d7ae66401f9 ]

The session resources are used by FW and driver when session is offloaded,
once session is uploaded these resources are not used. The lock is not
required as these fields won't be used any longer. The offload and upload
calls are sequential, hence lock is not required.

This will suppress following BUG_ON():

[  449.843143] ------------[ cut here ]------------
[  449.848302] kernel BUG at mm/vmalloc.c:2727!
[  449.853072] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[  449.858712] CPU: 5 PID: 1996 Comm: kworker/u24:2 Not tainted 5.14.0-118.el9.x86_64 #1
Rebooting.
[  449.867454] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.3.4 11/08/2016
[  449.876966] Workqueue: fc_rport_eq fc_rport_work [libfc]
[  449.882910] RIP: 0010:vunmap+0x2e/0x30
[  449.887098] Code: 00 65 8b 05 14 a2 f0 4a a9 00 ff ff 00 75 1b 55 48 89 fd e8 34 36 79 00 48 85 ed 74 0b 48 89 ef 31 f6 5d e9 14 fc ff ff 5d c3 <0f> 0b 0f 1f 44 00 00 41 57 41 56 49 89 ce 41 55 49 89 fd 41 54 41
[  449.908054] RSP: 0018:ffffb83d878b3d68 EFLAGS: 00010206
[  449.913887] RAX: 0000000080000201 RBX: ffff8f4355133550 RCX: 000000000d400005
[  449.921843] RDX: 0000000000000001 RSI: 0000000000001000 RDI: ffffb83da53f5000
[  449.929808] RBP: ffff8f4ac6675800 R08: ffffb83d878b3d30 R09: 00000000000efbdf
[  449.937774] R10: 0000000000000003 R11: ffff8f434573e000 R12: 0000000000001000
[  449.945736] R13: 0000000000001000 R14: ffffb83da53f5000 R15: ffff8f43d4ea3ae0
[  449.953701] FS:  0000000000000000(0000) GS:ffff8f529fc80000(0000) knlGS:0000000000000000
[  449.962732] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  449.969138] CR2: 00007f8cf993e150 CR3: 0000000efbe10003 CR4: 00000000003706e0
[  449.977102] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  449.985065] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  449.993028] Call Trace:
[  449.995756]  __iommu_dma_free+0x96/0x100
[  450.000139]  bnx2fc_free_session_resc+0x67/0x240 [bnx2fc]
[  450.006171]  bnx2fc_upload_session+0xce/0x100 [bnx2fc]
[  450.011910]  bnx2fc_rport_event_handler+0x9f/0x240 [bnx2fc]
[  450.018136]  fc_rport_work+0x103/0x5b0 [libfc]
[  450.023103]  process_one_work+0x1e8/0x3c0
[  450.027581]  worker_thread+0x50/0x3b0
[  450.031669]  ? rescuer_thread+0x370/0x370
[  450.036143]  kthread+0x149/0x170
[  450.039744]  ? set_kthread_struct+0x40/0x40
[  450.044411]  ret_from_fork+0x22/0x30
[  450.048404] Modules linked in: vfat msdos fat xfs nfs_layout_nfsv41_files rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver dm_service_time qedf qed crc8 bnx2fc libfcoe libfc scsi_transport_fc intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp dcdbas rapl intel_cstate intel_uncore mei_me pcspkr mei ipmi_ssif lpc_ich ipmi_si fuse zram ext4 mbcache jbd2 loop nfsv3 nfs_acl nfs lockd grace fscache netfs irdma ice sd_mod t10_pi sg ib_uverbs ib_core 8021q garp mrp stp llc mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt mxm_wmi fb_sys_fops cec crct10dif_pclmul ahci crc32_pclmul bnx2x drm ghash_clmulni_intel libahci rfkill i40e libata megaraid_sas mdio wmi sunrpc lrw dm_crypt dm_round_robin dm_multipath dm_snapshot dm_bufio dm_mirror dm_region_hash dm_log dm_zero dm_mod linear raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid6_pq libcrc32c crc32c_intel raid1 raid0 iscsi_ibft squashfs be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls
[  450.048497]  libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi edd ipmi_devintf ipmi_msghandler
[  450.159753] ---[ end trace 712de2c57c64abc8 ]---

Reported-by: Guangwu Zhang <guazhang@redhat.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20240315071427.31842-1-skashyap@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/bnx2fc/bnx2fc_tgt.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/scsi/bnx2fc/bnx2fc_tgt.c b/drivers/scsi/bnx2fc/bnx2fc_tgt.c
index 9200b718085c4..5015d9b0817ac 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_tgt.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_tgt.c
@@ -833,7 +833,6 @@ static void bnx2fc_free_session_resc(struct bnx2fc_hba *hba,
 
 	BNX2FC_TGT_DBG(tgt, "Freeing up session resources\n");
 
-	spin_lock_bh(&tgt->cq_lock);
 	ctx_base_ptr = tgt->ctx_base;
 	tgt->ctx_base = NULL;
 
@@ -889,7 +888,6 @@ static void bnx2fc_free_session_resc(struct bnx2fc_hba *hba,
 				    tgt->sq, tgt->sq_dma);
 		tgt->sq = NULL;
 	}
-	spin_unlock_bh(&tgt->cq_lock);
 
 	if (ctx_base_ptr)
 		iounmap(ctx_base_ptr);
-- 
2.43.0

[PATCH 5.15 070/168] btrfs: return accurate error code on open failure in open_fs_devices()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anand Jain <anand.jain@oracle.com>

[ Upstream commit 2f1aeab9fca1a5f583be1add175d1ee95c213cfa ]

When attempting to exclusive open a device which has no exclusive open
permission, such as a physical device associated with the flakey dm
device, the open operation will fail, resulting in a mount failure.

In this particular scenario, we erroneously return -EINVAL instead of the
correct error code provided by the bdev_open_by_path() function, which is
-EBUSY.

Fix this, by returning error code from the bdev_open_by_path() function.
With this correction, the mount error message will align with that of
ext4 and xfs.

Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/volumes.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 36e77956c63fa..2a0d44fd2dd98 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -1260,25 +1260,32 @@ static int open_fs_devices(struct btrfs_fs_devices *fs_devices,
 	struct btrfs_device *device;
 	struct btrfs_device *latest_dev = NULL;
 	struct btrfs_device *tmp_device;
+	int ret = 0;
 
 	flags |= FMODE_EXCL;
 
 	list_for_each_entry_safe(device, tmp_device, &fs_devices->devices,
 				 dev_list) {
-		int ret;
+		int ret2;
 
-		ret = btrfs_open_one_device(fs_devices, device, flags, holder);
-		if (ret == 0 &&
+		ret2 = btrfs_open_one_device(fs_devices, device, flags, holder);
+		if (ret2 == 0 &&
 		    (!latest_dev || device->generation > latest_dev->generation)) {
 			latest_dev = device;
-		} else if (ret == -ENODATA) {
+		} else if (ret2 == -ENODATA) {
 			fs_devices->num_devices--;
 			list_del(&device->dev_list);
 			btrfs_free_device(device);
 		}
+		if (ret == 0 && ret2 != 0)
+			ret = ret2;
 	}
-	if (fs_devices->open_devices == 0)
+
+	if (fs_devices->open_devices == 0) {
+		if (ret)
+			return ret;
 		return -EINVAL;
+	}
 
 	fs_devices->opened = 1;
 	fs_devices->latest_dev = latest_dev;
-- 
2.43.0

[PATCH 5.15 071/168] kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Borislav Petkov (AMD) <bp@alien8.de>

[ Upstream commit 54babdc0343fff2f32dfaafaaa9e42c4db278204 ]

When KCSAN and CONSTRUCTORS are enabled, one can trigger the

  "Unpatched return thunk in use. This should not happen!"

catch-all warning.

Usually, when objtool runs on the .o objects, it does generate a section
.return_sites which contains all offsets in the objects to the return
thunks of the functions present there. Those return thunks then get
patched at runtime by the alternatives.

KCSAN and CONSTRUCTORS add this to the object file's .text.startup
section:

  -------------------
  Disassembly of section .text.startup:

  ...

  0000000000000010 <_sub_I_00099_0>:
    10:   f3 0f 1e fa             endbr64
    14:   e8 00 00 00 00          call   19 <_sub_I_00099_0+0x9>
                          15: R_X86_64_PLT32      __tsan_init-0x4
    19:   e9 00 00 00 00          jmp    1e <__UNIQUE_ID___addressable_cryptd_alloc_aead349+0x6>
                          1a: R_X86_64_PLT32      __x86_return_thunk-0x4
  -------------------

which, if it is built as a module goes through the intermediary stage of
creating a <module>.mod.c file which, when translated, receives a second
constructor:

  -------------------
  Disassembly of section .text.startup:

  0000000000000010 <_sub_I_00099_0>:
    10:   f3 0f 1e fa             endbr64
    14:   e8 00 00 00 00          call   19 <_sub_I_00099_0+0x9>
                          15: R_X86_64_PLT32      __tsan_init-0x4
    19:   e9 00 00 00 00          jmp    1e <_sub_I_00099_0+0xe>
                          1a: R_X86_64_PLT32      __x86_return_thunk-0x4

  ...

  0000000000000030 <_sub_I_00099_0>:
    30:   f3 0f 1e fa             endbr64
    34:   e8 00 00 00 00          call   39 <_sub_I_00099_0+0x9>
                          35: R_X86_64_PLT32      __tsan_init-0x4
    39:   e9 00 00 00 00          jmp    3e <__ksymtab_cryptd_alloc_ahash+0x2>
                          3a: R_X86_64_PLT32      __x86_return_thunk-0x4
  -------------------

in the .ko file.

Objtool has run already so that second constructor's return thunk cannot
be added to the .return_sites section and thus the return thunk remains
unpatched and the warning rightfully fires.

Drop KCSAN flags from the mod.c generation stage as those constructors
do not contain data races one would be interested about.

Debugged together with David Kaplan <David.Kaplan@amd.com> and Nikolay
Borisov <nik.borisov@suse.com>.

Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/0851a207-7143-417e-be31-8bf2b3afb57d@molgen.mpg.de
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/Makefile.modfinal | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
index 47f047458264f..dce4cf55a4b68 100644
--- a/scripts/Makefile.modfinal
+++ b/scripts/Makefile.modfinal
@@ -23,7 +23,7 @@ modname = $(notdir $(@:.mod.o=))
 part-of-module = y
 
 quiet_cmd_cc_o_c = CC [M]  $@
-      cmd_cc_o_c = $(CC) $(filter-out $(CC_FLAGS_CFI) $(CFLAGS_GCOV), $(c_flags)) -c -o $@ $<
+      cmd_cc_o_c = $(CC) $(filter-out $(CC_FLAGS_CFI) $(CFLAGS_GCOV) $(CFLAGS_KCSAN), $(c_flags)) -c -o $@ $<
 
 %.mod.o: %.mod.c FORCE
 	$(call if_changed_dep,cc_o_c)
-- 
2.43.0

[PATCH 5.15 072/168] ALSA: line6: Zero-initialize message buffers

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit c4e51e424e2c772ce1836912a8b0b87cd61bc9d5 ]

For shutting up spurious KMSAN uninit-value warnings, just replace
kmalloc() calls with kzalloc() for the buffers used for
communications.  There should be no real issue with the original code,
but it's still better to cover.

Reported-by: syzbot+7fb05ccf7b3d2f9617b3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/00000000000084b18706150bcca5@google.com
Message-ID: <20240402063628.26609-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/line6/driver.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c
index b67617b68e509..f4437015d43a7 100644
--- a/sound/usb/line6/driver.c
+++ b/sound/usb/line6/driver.c
@@ -202,7 +202,7 @@ int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer,
 	struct urb *urb;
 
 	/* create message: */
-	msg = kmalloc(sizeof(struct message), GFP_ATOMIC);
+	msg = kzalloc(sizeof(struct message), GFP_ATOMIC);
 	if (msg == NULL)
 		return -ENOMEM;
 
@@ -688,7 +688,7 @@ static int line6_init_cap_control(struct usb_line6 *line6)
 	int ret;
 
 	/* initialize USB buffers: */
-	line6->buffer_listen = kmalloc(LINE6_BUFSIZE_LISTEN, GFP_KERNEL);
+	line6->buffer_listen = kzalloc(LINE6_BUFSIZE_LISTEN, GFP_KERNEL);
 	if (!line6->buffer_listen)
 		return -ENOMEM;
 
@@ -697,7 +697,7 @@ static int line6_init_cap_control(struct usb_line6 *line6)
 		return -ENOMEM;
 
 	if (line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI) {
-		line6->buffer_message = kmalloc(LINE6_MIDI_MESSAGE_MAXLEN, GFP_KERNEL);
+		line6->buffer_message = kzalloc(LINE6_MIDI_MESSAGE_MAXLEN, GFP_KERNEL);
 		if (!line6->buffer_message)
 			return -ENOMEM;
 
-- 
2.43.0

[PATCH 5.15 073/168] net: bcmgenet: Reset RBUF on first open

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Phil Elwell <phil@raspberrypi.com>

[ Upstream commit 0a6380cb4c6b5c1d6dad226ba3130f9090f0ccea ]

If the RBUF logic is not reset when the kernel starts then there
may be some data left over from any network boot loader. If the
64-byte packet headers are enabled then this can be fatal.

Extend bcmgenet_dma_disable to do perform the reset, but not when
called from bcmgenet_resume in order to preserve a wake packet.

N.B. This different handling of resume is just based on a hunch -
why else wouldn't one reset the RBUF as well as the TBUF? If this
isn't the case then it's easy to change the patch to make the RBUF
reset unconditional.

See: https://github.com/raspberrypi/linux/issues/3850
See: https://github.com/raspberrypi/firmware/issues/1882

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Maarten Vanraes <maarten@rmail.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index a2b736a9d20cc..9db391e5b4f4f 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -3256,7 +3256,7 @@ static void bcmgenet_get_hw_addr(struct bcmgenet_priv *priv,
 }
 
 /* Returns a reusable dma control register value */
-static u32 bcmgenet_dma_disable(struct bcmgenet_priv *priv)
+static u32 bcmgenet_dma_disable(struct bcmgenet_priv *priv, bool flush_rx)
 {
 	unsigned int i;
 	u32 reg;
@@ -3281,6 +3281,14 @@ static u32 bcmgenet_dma_disable(struct bcmgenet_priv *priv)
 	udelay(10);
 	bcmgenet_umac_writel(priv, 0, UMAC_TX_FLUSH);
 
+	if (flush_rx) {
+		reg = bcmgenet_rbuf_ctrl_get(priv);
+		bcmgenet_rbuf_ctrl_set(priv, reg | BIT(0));
+		udelay(10);
+		bcmgenet_rbuf_ctrl_set(priv, reg);
+		udelay(10);
+	}
+
 	return dma_ctrl;
 }
 
@@ -3344,8 +3352,8 @@ static int bcmgenet_open(struct net_device *dev)
 
 	bcmgenet_set_hw_addr(priv, dev->dev_addr);
 
-	/* Disable RX/TX DMA and flush TX queues */
-	dma_ctrl = bcmgenet_dma_disable(priv);
+	/* Disable RX/TX DMA and flush TX and RX queues */
+	dma_ctrl = bcmgenet_dma_disable(priv, true);
 
 	/* Reinitialize TDMA and RDMA and SW housekeeping */
 	ret = bcmgenet_init_dma(priv);
@@ -4201,7 +4209,7 @@ static int bcmgenet_resume(struct device *d)
 			bcmgenet_hfb_create_rxnfc_filter(priv, rule);
 
 	/* Disable RX/TX DMA and flush TX queues */
-	dma_ctrl = bcmgenet_dma_disable(priv);
+	dma_ctrl = bcmgenet_dma_disable(priv, false);
 
 	/* Reinitialize TDMA and RDMA and SW housekeeping */
 	ret = bcmgenet_init_dma(priv);
-- 
2.43.0

[PATCH 5.15 074/168] ata: sata_gemini: Check clk_enable() result

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chen Ni <nichen@iscas.ac.cn>

[ Upstream commit e85006ae7430aef780cc4f0849692e266a102ec0 ]

The call to clk_enable() in gemini_sata_start_bridge() can fail.
Add a check to detect such failure.

Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/sata_gemini.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/sata_gemini.c b/drivers/ata/sata_gemini.c
index 6fd54e968d10a..1564472fd5d50 100644
--- a/drivers/ata/sata_gemini.c
+++ b/drivers/ata/sata_gemini.c
@@ -201,7 +201,10 @@ int gemini_sata_start_bridge(struct sata_gemini *sg, unsigned int bridge)
 		pclk = sg->sata0_pclk;
 	else
 		pclk = sg->sata1_pclk;
-	clk_enable(pclk);
+	ret = clk_enable(pclk);
+	if (ret)
+		return ret;
+
 	msleep(10);
 
 	/* Do not keep clocking a bridge that is not online */
-- 
2.43.0

[PATCH 5.15 075/168] firewire: ohci: mask bus reset interrupts between ISR and bottom half

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Adam Goldman <adamg@pobox.com>

[ Upstream commit 752e3c53de0fa3b7d817a83050b6699b8e9c6ec9 ]

In the FireWire OHCI interrupt handler, if a bus reset interrupt has
occurred, mask bus reset interrupts until bus_reset_work has serviced and
cleared the interrupt.

Normally, we always leave bus reset interrupts masked. We infer the bus
reset from the self-ID interrupt that happens shortly thereafter. A
scenario where we unmask bus reset interrupts was introduced in 2008 in
a007bb857e0b26f5d8b73c2ff90782d9c0972620: If
OHCI_PARAM_DEBUG_BUSRESETS (8) is set in the debug parameter bitmask, we
will unmask bus reset interrupts so we can log them.

irq_handler logs the bus reset interrupt. However, we can't clear the bus
reset event flag in irq_handler, because we won't service the event until
later. irq_handler exits with the event flag still set. If the
corresponding interrupt is still unmasked, the first bus reset will
usually freeze the system due to irq_handler being called again each
time it exits. This freeze can be reproduced by loading firewire_ohci
with "modprobe firewire_ohci debug=-1" (to enable all debugging output).
Apparently there are also some cases where bus_reset_work will get called
soon enough to clear the event, and operation will continue normally.

This freeze was first reported a few months after a007bb85 was committed,
but until now it was never fixed. The debug level could safely be set
to -1 through sysfs after the module was loaded, but this would be
ineffectual in logging bus reset interrupts since they were only
unmasked during initialization.

irq_handler will now leave the event flag set but mask bus reset
interrupts, so irq_handler won't be called again and there will be no
freeze. If OHCI_PARAM_DEBUG_BUSRESETS is enabled, bus_reset_work will
unmask the interrupt after servicing the event, so future interrupts
will be caught as desired.

As a side effect to this change, OHCI_PARAM_DEBUG_BUSRESETS can now be
enabled through sysfs in addition to during initial module loading.
However, when enabled through sysfs, logging of bus reset interrupts will
be effective only starting with the second bus reset, after
bus_reset_work has executed.

Signed-off-by: Adam Goldman <adamg@pobox.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firewire/ohci.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 667ff40f39353..7d94e1cbc0ed3 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -2049,6 +2049,8 @@ static void bus_reset_work(struct work_struct *work)
 
 	ohci->generation = generation;
 	reg_write(ohci, OHCI1394_IntEventClear, OHCI1394_busReset);
+	if (param_debug & OHCI_PARAM_DEBUG_BUSRESETS)
+		reg_write(ohci, OHCI1394_IntMaskSet, OHCI1394_busReset);
 
 	if (ohci->quirks & QUIRK_RESET_PACKET)
 		ohci->request_generation = generation;
@@ -2115,12 +2117,14 @@ static irqreturn_t irq_handler(int irq, void *data)
 		return IRQ_NONE;
 
 	/*
-	 * busReset and postedWriteErr must not be cleared yet
+	 * busReset and postedWriteErr events must not be cleared yet
 	 * (OHCI 1.1 clauses 7.2.3.2 and 13.2.8.1)
 	 */
 	reg_write(ohci, OHCI1394_IntEventClear,
 		  event & ~(OHCI1394_busReset | OHCI1394_postedWriteErr));
 	log_irqs(ohci, event);
+	if (event & OHCI1394_busReset)
+		reg_write(ohci, OHCI1394_IntMaskClear, OHCI1394_busReset);
 
 	if (event & OHCI1394_selfIDComplete)
 		queue_work(selfid_workqueue, &ohci->bus_reset_work);
-- 
2.43.0

[PATCH 5.15 076/168] tools/power turbostat: Fix added raw MSR output

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Doug Smythies <dsmythies@telus.net>

[ Upstream commit e5f4e68eed85fa8495d78cd966eecc2b27bb9e53 ]

When using --Summary mode, added MSRs in raw mode always
print zeros. Print the actual register contents.

Example, with patch:

note the added column:
--add msr0x64f,u32,package,raw,REASON

Where:

0x64F is MSR_CORE_PERF_LIMIT_REASONS

Busy%   Bzy_MHz PkgTmp  PkgWatt CorWatt     REASON
0.00    4800    35      1.42    0.76    0x00000000
0.00    4801    34      1.42    0.76    0x00000000
80.08   4531    66      108.17  107.52  0x08000000
98.69   4530    66      133.21  132.54  0x08000000
99.28   4505    66      128.26  127.60  0x0c000400
99.65   4486    68      124.91  124.25  0x0c000400
99.63   4483    68      124.90  124.25  0x0c000400
79.34   4481    41      99.80   99.13   0x0c000000
0.00    4801    41      1.40    0.73    0x0c000000

Where, for the test processor (i5-10600K):

PKG Limit #1: 125.000 Watts, 8.000000 sec
MSR bit 26 = log; bit 10 = status

PKG Limit #2: 136.000 Watts, 0.002441 sec
MSR bit 27 = log; bit 11 = status

Example, without patch:

Busy%   Bzy_MHz PkgTmp  PkgWatt CorWatt     REASON
0.01    4800    35      1.43    0.77    0x00000000
0.00    4801    35      1.39    0.73    0x00000000
83.49   4531    66      112.71  112.06  0x00000000
98.69   4530    68      133.35  132.69  0x00000000
99.31   4500    67      127.96  127.30  0x00000000
99.63   4483    69      124.91  124.25  0x00000000
99.61   4481    69      124.90  124.25  0x00000000
99.61   4481    71      124.92  124.25  0x00000000
59.35   4479    42      75.03   74.37   0x00000000
0.00    4800    42      1.39    0.73    0x00000000
0.00    4801    42      1.42    0.76    0x00000000

c000000

[lenb: simplified patch to apply only to package scope]

Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/power/x86/turbostat/turbostat.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 65ada8065cfc2..0822e7dc0fd8b 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -1761,9 +1761,10 @@ int sum_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
 	average.packages.rapl_dram_perf_status += p->rapl_dram_perf_status;
 
 	for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) {
-		if (mp->format == FORMAT_RAW)
-			continue;
-		average.packages.counter[i] += p->counter[i];
+		if ((mp->format == FORMAT_RAW) && (topo.num_packages == 0))
+			average.packages.counter[i] = p->counter[i];
+		else
+			average.packages.counter[i] += p->counter[i];
 	}
 	return 0;
 }
-- 
2.43.0

[PATCH 5.15 077/168] tools/power turbostat: Fix Bzy_MHz documentation typo

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peng Liu <liupeng17@lenovo.com>

[ Upstream commit 0b13410b52c4636aacb6964a4253a797c0fa0d16 ]

The code calculates Bzy_MHz by multiplying TSC_delta * APERF_delta/MPERF_delta
The man page erroneously showed that TSC_delta was divided.

Signed-off-by: Peng Liu <liupeng17@lenovo.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/power/x86/turbostat/turbostat.8 | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index b3d4bf08e70b1..f382cd53cb4e8 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -322,7 +322,7 @@ below the processor's base frequency.
 
 Busy% = MPERF_delta/TSC_delta
 
-Bzy_MHz = TSC_delta/APERF_delta/MPERF_delta/measurement_interval
+Bzy_MHz = TSC_delta*APERF_delta/MPERF_delta/measurement_interval
 
 Note that these calculations depend on TSC_delta, so they
 are not reliable during intervals when TSC_MHz is not running at the base frequency.
-- 
2.43.0

[PATCH 5.15 078/168] btrfs: make btrfs_clear_delalloc_extent() free delalloc reserve

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Boris Burkov <boris@bur.io>

[ Upstream commit 3c6f0c5ecc8910d4ffb0dfe85609ebc0c91c8f34 ]

Currently, this call site in btrfs_clear_delalloc_extent() only converts
the reservation. We are marking it not delalloc, so I don't think it
makes sense to keep the rsv around.  This is a path where we are not
sure to join a transaction, so it leads to incorrect free-ing during
umount.

Helps with the pass rate of generic/269 and generic/475.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/inode.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index c7d8a18daaf50..07c6ab4ba0d43 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -2261,7 +2261,7 @@ void btrfs_clear_delalloc_extent(struct inode *vfs_inode,
 		 */
 		if (*bits & EXTENT_CLEAR_META_RESV &&
 		    root != fs_info->tree_root)
-			btrfs_delalloc_release_metadata(inode, len, false);
+			btrfs_delalloc_release_metadata(inode, len, true);
 
 		/* For sanity tests. */
 		if (btrfs_is_testing(fs_info))
-- 
2.43.0

[PATCH 5.15 079/168] btrfs: always clear PERTRANS metadata during commit

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Boris Burkov <boris@bur.io>

[ Upstream commit 6e68de0bb0ed59e0554a0c15ede7308c47351e2d ]

It is possible to clear a root's IN_TRANS tag from the radix tree, but
not clear its PERTRANS, if there is some error in between. Eliminate
that possibility by moving the free up to where we clear the tag.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/transaction.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 99cdd1d6a4bf8..a9b794c47159f 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -1424,6 +1424,7 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans)
 			radix_tree_tag_clear(&fs_info->fs_roots_radix,
 					(unsigned long)root->root_key.objectid,
 					BTRFS_ROOT_TRANS_TAG);
+			btrfs_qgroup_free_meta_all_pertrans(root);
 			spin_unlock(&fs_info->fs_roots_radix_lock);
 
 			btrfs_free_log(trans, root);
@@ -1448,7 +1449,6 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans)
 			if (ret2)
 				return ret2;
 			spin_lock(&fs_info->fs_roots_radix_lock);
-			btrfs_qgroup_free_meta_all_pertrans(root);
 		}
 	}
 	spin_unlock(&fs_info->fs_roots_radix_lock);
-- 
2.43.0

[PATCH 5.15 080/168] scsi: target: Fix SELinux error when systemd-modules loads the target module

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maurizio Lombardi <mlombard@redhat.com>

[ Upstream commit 97a54ef596c3fd24ec2b227ba8aaf2cf5415e779 ]

If the systemd-modules service loads the target module, the credentials of
that userspace process will be used to validate the access to the target db
directory.  SELinux will prevent it, reporting an error like the following:

kernel: audit: type=1400 audit(1676301082.205:4): avc: denied  { read }
for  pid=1020 comm="systemd-modules" name="target" dev="dm-3"
ino=4657583 scontext=system_u:system_r:systemd_modules_load_t:s0
tcontext=system_u:object_r:targetd_etc_rw_t:s0 tclass=dir permissive=0

Fix the error by using the kernel credentials to access the db directory

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Link: https://lore.kernel.org/r/20240215143944.847184-2-mlombard@redhat.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_configfs.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c
index 023bd4516a681..30ce3451bc6b0 100644
--- a/drivers/target/target_core_configfs.c
+++ b/drivers/target/target_core_configfs.c
@@ -3566,6 +3566,8 @@ static int __init target_core_init_configfs(void)
 {
 	struct configfs_subsystem *subsys = &target_core_fabrics;
 	struct t10_alua_lu_gp *lu_gp;
+	struct cred *kern_cred;
+	const struct cred *old_cred;
 	int ret;
 
 	pr_debug("TARGET_CORE[0]: Loading Generic Kernel Storage"
@@ -3642,11 +3644,21 @@ static int __init target_core_init_configfs(void)
 	if (ret < 0)
 		goto out;
 
+	/* We use the kernel credentials to access the target directory */
+	kern_cred = prepare_kernel_cred(&init_task);
+	if (!kern_cred) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	old_cred = override_creds(kern_cred);
 	target_init_dbroot();
+	revert_creds(old_cred);
+	put_cred(kern_cred);
 
 	return 0;
 
 out:
+	target_xcopy_release_pt();
 	configfs_unregister_subsystem(subsys);
 	core_dev_release_virtual_lun0();
 	rd_module_exit();
-- 
2.43.0

[PATCH 5.15 081/168] blk-iocost: avoid out of bounds shift

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rik van Riel <riel@surriel.com>

[ Upstream commit beaa51b36012fad5a4d3c18b88a617aea7a9b96d ]

UBSAN catches undefined behavior in blk-iocost, where sometimes
iocg->delay is shifted right by a number that is too large,
resulting in undefined behavior on some architectures.

[  186.556576] ------------[ cut here ]------------
UBSAN: shift-out-of-bounds in block/blk-iocost.c:1366:23
shift exponent 64 is too large for 64-bit type 'u64' (aka 'unsigned long long')
CPU: 16 PID: 0 Comm: swapper/16 Tainted: G S          E    N 6.9.0-0_fbk700_debug_rc2_kbuilder_0_gc85af715cac0 #1
Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A23 12/08/2020
Call Trace:
 <IRQ>
 dump_stack_lvl+0x8f/0xe0
 __ubsan_handle_shift_out_of_bounds+0x22c/0x280
 iocg_kick_delay+0x30b/0x310
 ioc_timer_fn+0x2fb/0x1f80
 __run_timer_base+0x1b6/0x250
...

Avoid that undefined behavior by simply taking the
"delay = 0" branch if the shift is too large.

I am not sure what the symptoms of an undefined value
delay will be, but I suspect it could be more than a
little annoying to debug.

Signed-off-by: Rik van Riel <riel@surriel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Jens Axboe <axboe@kernel.dk>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240404123253.0f58010f@imladris.surriel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-iocost.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/block/blk-iocost.c b/block/blk-iocost.c
index 645a589edda82..bfdb7b0cf49de 100644
--- a/block/blk-iocost.c
+++ b/block/blk-iocost.c
@@ -1336,7 +1336,7 @@ static bool iocg_kick_delay(struct ioc_gq *iocg, struct ioc_now *now)
 {
 	struct ioc *ioc = iocg->ioc;
 	struct blkcg_gq *blkg = iocg_to_blkg(iocg);
-	u64 tdelta, delay, new_delay;
+	u64 tdelta, delay, new_delay, shift;
 	s64 vover, vover_pct;
 	u32 hwa;
 
@@ -1351,8 +1351,9 @@ static bool iocg_kick_delay(struct ioc_gq *iocg, struct ioc_now *now)
 
 	/* calculate the current delay in effect - 1/2 every second */
 	tdelta = now->now - iocg->delay_at;
-	if (iocg->delay)
-		delay = iocg->delay >> div64_u64(tdelta, USEC_PER_SEC);
+	shift = div64_u64(tdelta, USEC_PER_SEC);
+	if (iocg->delay && shift < BITS_PER_LONG)
+		delay = iocg->delay >> shift;
 	else
 		delay = 0;
 
-- 
2.43.0

[PATCH 5.15 082/168] gpu: host1x: Do not setup DMA for virtual devices

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit 8ab58f6841b19423231c5db3378691ec80c778f8 ]

The host1x devices are virtual compound devices and do not perform DMA
accesses themselves, so they do not need to be set up for DMA.

Ideally we would also not need to set up DMA masks for the virtual
devices, but we currently still need those for legacy support on old
hardware.

Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240314154943.2487549-1-thierry.reding@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/host1x/bus.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/gpu/host1x/bus.c b/drivers/gpu/host1x/bus.c
index 218e3718fd68c..96737ddc81209 100644
--- a/drivers/gpu/host1x/bus.c
+++ b/drivers/gpu/host1x/bus.c
@@ -367,11 +367,6 @@ static int host1x_device_uevent(struct device *dev,
 	return 0;
 }
 
-static int host1x_dma_configure(struct device *dev)
-{
-	return of_dma_configure(dev, dev->of_node, true);
-}
-
 static const struct dev_pm_ops host1x_device_pm_ops = {
 	.suspend = pm_generic_suspend,
 	.resume = pm_generic_resume,
@@ -385,7 +380,6 @@ struct bus_type host1x_bus_type = {
 	.name = "host1x",
 	.match = host1x_device_match,
 	.uevent = host1x_device_uevent,
-	.dma_configure = host1x_dma_configure,
 	.pm = &host1x_device_pm_ops,
 };
 
@@ -474,8 +468,6 @@ static int host1x_device_add(struct host1x *host1x,
 	device->dev.bus = &host1x_bus_type;
 	device->dev.parent = host1x->dev;
 
-	of_dma_configure(&device->dev, host1x->dev->of_node, true);
-
 	device->dev.dma_parms = &device->dma_parms;
 	dma_set_max_seg_size(&device->dev, UINT_MAX);
 
-- 
2.43.0

[PATCH 5.15 083/168] MIPS: scall: Save thread_info.syscall unconditionally on entry

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

[ Upstream commit 4370b673ccf240bf7587b0cb8e6726a5ccaf1f17 ]

thread_info.syscall is used by syscall_get_nr to supply syscall nr
over a thread stack frame.

Previously, thread_info.syscall is only saved at syscall_trace_enter
when syscall tracing is enabled. However rest of the kernel code do
expect syscall_get_nr to be available without syscall tracing. The
previous design breaks collect_syscall.

Move saving process to syscall entry to fix it.

Reported-by: Xi Ruoyao <xry111@xry111.site>
Link: https://github.com/util-linux/util-linux/issues/2867
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/ptrace.h |  2 +-
 arch/mips/kernel/asm-offsets.c |  1 +
 arch/mips/kernel/ptrace.c      | 15 ++++++---------
 arch/mips/kernel/scall32-o32.S | 23 +++++++++++++----------
 arch/mips/kernel/scall64-n32.S |  3 ++-
 arch/mips/kernel/scall64-n64.S |  3 ++-
 arch/mips/kernel/scall64-o32.S | 33 +++++++++++++++++----------------
 7 files changed, 42 insertions(+), 38 deletions(-)

diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index b3e4dd6be7e20..428b9f1cf1de2 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -157,7 +157,7 @@ static inline long regs_return_value(struct pt_regs *regs)
 #define instruction_pointer(regs) ((regs)->cp0_epc)
 #define profile_pc(regs) instruction_pointer(regs)
 
-extern asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall);
+extern asmlinkage long syscall_trace_enter(struct pt_regs *regs);
 extern asmlinkage void syscall_trace_leave(struct pt_regs *regs);
 
 extern void die(const char *, struct pt_regs *) __noreturn;
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index 04ca75278f023..6cd0246aa2c69 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -98,6 +98,7 @@ void output_thread_info_defines(void)
 	OFFSET(TI_CPU, thread_info, cpu);
 	OFFSET(TI_PRE_COUNT, thread_info, preempt_count);
 	OFFSET(TI_REGS, thread_info, regs);
+	OFFSET(TI_SYSCALL, thread_info, syscall);
 	DEFINE(_THREAD_SIZE, THREAD_SIZE);
 	DEFINE(_THREAD_MASK, THREAD_MASK);
 	DEFINE(_IRQ_STACK_SIZE, IRQ_STACK_SIZE);
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index db7c5be1d4a35..dd454b429ff73 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -1310,16 +1310,13 @@ long arch_ptrace(struct task_struct *child, long request,
  * Notification of system call entry/exit
  * - triggered by current->work.syscall_trace
  */
-asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall)
+asmlinkage long syscall_trace_enter(struct pt_regs *regs)
 {
 	user_exit();
 
-	current_thread_info()->syscall = syscall;
-
 	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
 		if (tracehook_report_syscall_entry(regs))
 			return -1;
-		syscall = current_thread_info()->syscall;
 	}
 
 #ifdef CONFIG_SECCOMP
@@ -1328,7 +1325,7 @@ asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall)
 		struct seccomp_data sd;
 		unsigned long args[6];
 
-		sd.nr = syscall;
+		sd.nr = current_thread_info()->syscall;
 		sd.arch = syscall_get_arch(current);
 		syscall_get_arguments(current, regs, args);
 		for (i = 0; i < 6; i++)
@@ -1338,23 +1335,23 @@ asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall)
 		ret = __secure_computing(&sd);
 		if (ret == -1)
 			return ret;
-		syscall = current_thread_info()->syscall;
 	}
 #endif
 
 	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
 		trace_sys_enter(regs, regs->regs[2]);
 
-	audit_syscall_entry(syscall, regs->regs[4], regs->regs[5],
+	audit_syscall_entry(current_thread_info()->syscall,
+			    regs->regs[4], regs->regs[5],
 			    regs->regs[6], regs->regs[7]);
 
 	/*
 	 * Negative syscall numbers are mistaken for rejected syscalls, but
 	 * won't have had the return value set appropriately, so we do so now.
 	 */
-	if (syscall < 0)
+	if (current_thread_info()->syscall < 0)
 		syscall_set_return_value(current, regs, -ENOSYS, 0);
-	return syscall;
+	return current_thread_info()->syscall;
 }
 
 /*
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 9bfce5f75f601..6c14160cd8ba7 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -78,6 +78,18 @@ loads_done:
 	PTR_WD	load_a7, bad_stack_a7
 	.previous
 
+	/*
+	 * syscall number is in v0 unless we called syscall(__NR_###)
+	 * where the real syscall number is in a0
+	 */
+	subu	t2, v0,  __NR_O32_Linux
+	bnez	t2, 1f /* __NR_syscall at offset 0 */
+	LONG_S	a0, TI_SYSCALL($28)	# Save a0 as syscall number
+	b	2f
+1:
+	LONG_S	v0, TI_SYSCALL($28)	# Save v0 as syscall number
+2:
+
 	lw	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	and	t0, t1
@@ -115,16 +127,7 @@ syscall_trace_entry:
 	SAVE_STATIC
 	move	a0, sp
 
-	/*
-	 * syscall number is in v0 unless we called syscall(__NR_###)
-	 * where the real syscall number is in a0
-	 */
-	move	a1, v0
-	subu	t2, v0,  __NR_O32_Linux
-	bnez	t2, 1f /* __NR_syscall at offset 0 */
-	lw	a1, PT_R4(sp)
-
-1:	jal	syscall_trace_enter
+	jal	syscall_trace_enter
 
 	bltz	v0, 1f			# seccomp failed? Skip syscall
 
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 97456b2ca7dc3..97788859238c3 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -44,6 +44,8 @@ NESTED(handle_sysn32, PT_SIZE, sp)
 
 	sd	a3, PT_R26(sp)		# save a3 for syscall restarting
 
+	LONG_S	v0, TI_SYSCALL($28)     # Store syscall number
+
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	LONG_L	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	and	t0, t1, t0
@@ -72,7 +74,6 @@ syscall_common:
 n32_syscall_trace_entry:
 	SAVE_STATIC
 	move	a0, sp
-	move	a1, v0
 	jal	syscall_trace_enter
 
 	bltz	v0, 1f			# seccomp failed? Skip syscall
diff --git a/arch/mips/kernel/scall64-n64.S b/arch/mips/kernel/scall64-n64.S
index 5f6ed4b4c3993..db58115385639 100644
--- a/arch/mips/kernel/scall64-n64.S
+++ b/arch/mips/kernel/scall64-n64.S
@@ -47,6 +47,8 @@ NESTED(handle_sys64, PT_SIZE, sp)
 
 	sd	a3, PT_R26(sp)		# save a3 for syscall restarting
 
+	LONG_S	v0, TI_SYSCALL($28)     # Store syscall number
+
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	LONG_L	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	and	t0, t1, t0
@@ -83,7 +85,6 @@ n64_syscall_exit:
 syscall_trace_entry:
 	SAVE_STATIC
 	move	a0, sp
-	move	a1, v0
 	jal	syscall_trace_enter
 
 	bltz	v0, 1f			# seccomp failed? Skip syscall
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index d3c2616cba226..7a5abb73e5312 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -79,6 +79,22 @@ loads_done:
 	PTR_WD	load_a7, bad_stack_a7
 	.previous
 
+	/*
+	 * absolute syscall number is in v0 unless we called syscall(__NR_###)
+	 * where the real syscall number is in a0
+	 * note: NR_syscall is the first O32 syscall but the macro is
+	 * only defined when compiling with -mabi=32 (CONFIG_32BIT)
+	 * therefore __NR_O32_Linux is used (4000)
+	 */
+
+	subu	t2, v0,  __NR_O32_Linux
+	bnez	t2, 1f /* __NR_syscall at offset 0 */
+	LONG_S	a0, TI_SYSCALL($28)	# Save a0 as syscall number
+	b	2f
+1:
+	LONG_S	v0, TI_SYSCALL($28)	# Save v0 as syscall number
+2:
+
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	LONG_L	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	and	t0, t1, t0
@@ -113,22 +129,7 @@ trace_a_syscall:
 	sd	a7, PT_R11(sp)		# For indirect syscalls
 
 	move	a0, sp
-	/*
-	 * absolute syscall number is in v0 unless we called syscall(__NR_###)
-	 * where the real syscall number is in a0
-	 * note: NR_syscall is the first O32 syscall but the macro is
-	 * only defined when compiling with -mabi=32 (CONFIG_32BIT)
-	 * therefore __NR_O32_Linux is used (4000)
-	 */
-	.set	push
-	.set	reorder
-	subu	t1, v0,  __NR_O32_Linux
-	move	a1, v0
-	bnez	t1, 1f /* __NR_syscall at offset 0 */
-	ld	a1, PT_R4(sp) /* Arg1 for __NR_syscall case */
-	.set	pop
-
-1:	jal	syscall_trace_enter
+	jal	syscall_trace_enter
 
 	bltz	v0, 1f			# seccomp failed? Skip syscall
 
-- 
2.43.0

[PATCH 5.15 084/168] selftests: timers: Fix valid-adjtimex signed left-shift undefined behavior

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Stultz <jstultz@google.com>

[ Upstream commit 076361362122a6d8a4c45f172ced5576b2d4a50d ]

The struct adjtimex freq field takes a signed value who's units are in
shifted (<<16) parts-per-million.

Unfortunately for negative adjustments, the straightforward use of:

  freq = ppm << 16 trips undefined behavior warnings with clang:

valid-adjtimex.c:66:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
        -499<<16,
        ~~~~^
valid-adjtimex.c:67:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
        -450<<16,
        ~~~~^
..

Fix it by using a multiply by (1 << 16) instead of shifting negative values
in the valid-adjtimex test case. Align the values for better readability.

Reported-by: Lee Jones <joneslee@google.com>
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240409202222.2830476-1-jstultz@google.com
Link: https://lore.kernel.org/lkml/0c6d4f0d-2064-4444-986b-1d1ed782135f@collabora.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../testing/selftests/timers/valid-adjtimex.c | 73 +++++++++----------
 1 file changed, 36 insertions(+), 37 deletions(-)

diff --git a/tools/testing/selftests/timers/valid-adjtimex.c b/tools/testing/selftests/timers/valid-adjtimex.c
index 48b9a803235a8..d13ebde203221 100644
--- a/tools/testing/selftests/timers/valid-adjtimex.c
+++ b/tools/testing/selftests/timers/valid-adjtimex.c
@@ -21,9 +21,6 @@
  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *   GNU General Public License for more details.
  */
-
-
-
 #include <stdio.h>
 #include <stdlib.h>
 #include <time.h>
@@ -62,45 +59,47 @@ int clear_time_state(void)
 #define NUM_FREQ_OUTOFRANGE 4
 #define NUM_FREQ_INVALID 2
 
+#define SHIFTED_PPM (1 << 16)
+
 long valid_freq[NUM_FREQ_VALID] = {
-	-499<<16,
-	-450<<16,
-	-400<<16,
-	-350<<16,
-	-300<<16,
-	-250<<16,
-	-200<<16,
-	-150<<16,
-	-100<<16,
-	-75<<16,
-	-50<<16,
-	-25<<16,
-	-10<<16,
-	-5<<16,
-	-1<<16,
+	 -499 * SHIFTED_PPM,
+	 -450 * SHIFTED_PPM,
+	 -400 * SHIFTED_PPM,
+	 -350 * SHIFTED_PPM,
+	 -300 * SHIFTED_PPM,
+	 -250 * SHIFTED_PPM,
+	 -200 * SHIFTED_PPM,
+	 -150 * SHIFTED_PPM,
+	 -100 * SHIFTED_PPM,
+	  -75 * SHIFTED_PPM,
+	  -50 * SHIFTED_PPM,
+	  -25 * SHIFTED_PPM,
+	  -10 * SHIFTED_PPM,
+	   -5 * SHIFTED_PPM,
+	   -1 * SHIFTED_PPM,
 	-1000,
-	1<<16,
-	5<<16,
-	10<<16,
-	25<<16,
-	50<<16,
-	75<<16,
-	100<<16,
-	150<<16,
-	200<<16,
-	250<<16,
-	300<<16,
-	350<<16,
-	400<<16,
-	450<<16,
-	499<<16,
+	    1 * SHIFTED_PPM,
+	    5 * SHIFTED_PPM,
+	   10 * SHIFTED_PPM,
+	   25 * SHIFTED_PPM,
+	   50 * SHIFTED_PPM,
+	   75 * SHIFTED_PPM,
+	  100 * SHIFTED_PPM,
+	  150 * SHIFTED_PPM,
+	  200 * SHIFTED_PPM,
+	  250 * SHIFTED_PPM,
+	  300 * SHIFTED_PPM,
+	  350 * SHIFTED_PPM,
+	  400 * SHIFTED_PPM,
+	  450 * SHIFTED_PPM,
+	  499 * SHIFTED_PPM,
 };
 
 long outofrange_freq[NUM_FREQ_OUTOFRANGE] = {
-	-1000<<16,
-	-550<<16,
-	550<<16,
-	1000<<16,
+	-1000 * SHIFTED_PPM,
+	 -550 * SHIFTED_PPM,
+	  550 * SHIFTED_PPM,
+	 1000 * SHIFTED_PPM,
 };
 
 #define LONG_MAX (~0UL>>1)
-- 
2.43.0

[PATCH 5.15 085/168] iommu: mtk: fix module autoloading

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit 7537e31df80cb58c27f3b6fef702534ea87a5957 ]

Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240410164109.233308-1-krzk@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/mtk_iommu.c    | 1 +
 drivers/iommu/mtk_iommu_v1.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 2ae46fa6b3dee..04ac40d11fdff 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -1101,6 +1101,7 @@ static const struct of_device_id mtk_iommu_of_ids[] = {
 	{ .compatible = "mediatek,mt8192-m4u", .data = &mt8192_data},
 	{}
 };
+MODULE_DEVICE_TABLE(of, mtk_iommu_of_ids);
 
 static struct platform_driver mtk_iommu_driver = {
 	.probe	= mtk_iommu_probe,
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index fe1c3123a7e77..3a52f6a6ecb32 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -576,6 +576,7 @@ static const struct of_device_id mtk_iommu_of_ids[] = {
 	{ .compatible = "mediatek,mt2701-m4u", },
 	{}
 };
+MODULE_DEVICE_TABLE(of, mtk_iommu_v1_of_ids);
 
 static const struct component_master_ops mtk_iommu_com_ops = {
 	.bind		= mtk_iommu_bind,
-- 
2.43.0

[PATCH 5.15 086/168] fs/9p: only translate RWX permissions for plain 9P2000

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joakim Sindholt <opensource@zhasha.com>

[ Upstream commit cd25e15e57e68a6b18dc9323047fe9c68b99290b ]

Garbage in plain 9P2000's perm bits is allowed through, which causes it
to be able to set (among others) the suid bit. This was presumably not
the intent since the unix extended bits are handled explicitly and
conditionally on .u.

Signed-off-by: Joakim Sindholt <opensource@zhasha.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/9p/vfs_inode.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 0d9b7d453a877..75907f77f9e38 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -87,7 +87,7 @@ static int p9mode2perm(struct v9fs_session_info *v9ses,
 	int res;
 	int mode = stat->mode;
 
-	res = mode & S_IALLUGO;
+	res = mode & 0777; /* S_IRWXUGO */
 	if (v9fs_proto_dotu(v9ses)) {
 		if ((mode & P9_DMSETUID) == P9_DMSETUID)
 			res |= S_ISUID;
-- 
2.43.0

[PATCH 5.15 087/168] fs/9p: translate O_TRUNC into OTRUNC

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joakim Sindholt <opensource@zhasha.com>

[ Upstream commit 87de39e70503e04ddb58965520b15eb9efa7eef3 ]

This one hits both 9P2000 and .u as it appears v9fs has never translated
the O_TRUNC flag.

Signed-off-by: Joakim Sindholt <opensource@zhasha.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/9p/vfs_inode.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 75907f77f9e38..ef103ef392ee3 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -178,6 +178,9 @@ int v9fs_uflags2omode(int uflags, int extended)
 		break;
 	}
 
+	if (uflags & O_TRUNC)
+		ret |= P9_OTRUNC;
+
 	if (extended) {
 		if (uflags & O_EXCL)
 			ret |= P9_OEXCL;
-- 
2.43.0

[PATCH 5.15 088/168] 9p: explicitly deny setlease attempts

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Layton <jlayton@kernel.org>

[ Upstream commit 7a84602297d36617dbdadeba55a2567031e5165b ]

9p is a remote network protocol, and it doesn't support asynchronous
notifications from the server. Ensure that we don't hand out any leases
since we can't guarantee they'll be broken when a file's contents
change.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/9p/vfs_file.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c
index 7437b185fa8eb..0c84d414660ca 100644
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -660,6 +660,7 @@ const struct file_operations v9fs_file_operations = {
 	.splice_read = generic_file_splice_read,
 	.splice_write = iter_file_splice_write,
 	.fsync = v9fs_file_fsync,
+	.setlease = simple_nosetlease,
 };
 
 const struct file_operations v9fs_file_operations_dotl = {
@@ -701,4 +702,5 @@ const struct file_operations v9fs_mmap_file_operations_dotl = {
 	.splice_read = generic_file_splice_read,
 	.splice_write = iter_file_splice_write,
 	.fsync = v9fs_file_fsync_dotl,
+	.setlease = simple_nosetlease,
 };
-- 
2.43.0

[PATCH 5.15 089/168] gpio: wcove: Use -ENOTSUPP consistently

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 0c3b532ad3fbf82884a2e7e83e37c7dcdd4d1d99 ]

The GPIO library expects the drivers to return -ENOTSUPP in some
cases and not using analogue POSIX code. Make the driver to follow
this.

Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-wcove.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-wcove.c b/drivers/gpio/gpio-wcove.c
index 16a0fae1e32eb..2df948e16eb71 100644
--- a/drivers/gpio/gpio-wcove.c
+++ b/drivers/gpio/gpio-wcove.c
@@ -104,7 +104,7 @@ static inline int to_reg(int gpio, enum ctrl_register type)
 	unsigned int reg = type == CTRL_IN ? GPIO_IN_CTRL_BASE : GPIO_OUT_CTRL_BASE;
 
 	if (gpio >= WCOVE_GPIO_NUM)
-		return -EOPNOTSUPP;
+		return -ENOTSUPP;
 
 	return reg + gpio;
 }
-- 
2.43.0

[PATCH 5.15 090/168] gpio: crystalcove: Use -ENOTSUPP consistently

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit ace0ebe5c98d66889f19e0f30e2518d0c58d0e04 ]

The GPIO library expects the drivers to return -ENOTSUPP in some
cases and not using analogue POSIX code. Make the driver to follow
this.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-crystalcove.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-crystalcove.c b/drivers/gpio/gpio-crystalcove.c
index 5a909f3c79e87..c48a82c240873 100644
--- a/drivers/gpio/gpio-crystalcove.c
+++ b/drivers/gpio/gpio-crystalcove.c
@@ -91,7 +91,7 @@ static inline int to_reg(int gpio, enum ctrl_register reg_type)
 		case 0x5e:
 			return GPIOPANELCTL;
 		default:
-			return -EOPNOTSUPP;
+			return -ENOTSUPP;
 		}
 	}
 
-- 
2.43.0

[PATCH 5.15 091/168] clk: Dont hold prepare_lock when calling kref_put()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Boyd <sboyd@kernel.org>

[ Upstream commit 6f63af7511e7058f3fa4ad5b8102210741c9f947 ]

We don't need to hold the prepare_lock when dropping a ref on a struct
clk_core. The release function is only freeing memory and any code with
a pointer reference has already unlinked anything pointing to the
clk_core. This reduces the holding area of the prepare_lock a bit.

Note that we also don't call free_clk() with the prepare_lock held.
There isn't any reason to do that.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240325184204.745706-3-sboyd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/clk.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index a05b5bca64250..dc2bcf58fc107 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -4227,7 +4227,8 @@ void clk_unregister(struct clk *clk)
 	if (ops == &clk_nodrv_ops) {
 		pr_err("%s: unregistered clock: %s\n", __func__,
 		       clk->core->name);
-		goto unlock;
+		clk_prepare_unlock();
+		return;
 	}
 	/*
 	 * Assign empty clock ops for consumers that might still hold
@@ -4261,11 +4262,10 @@ void clk_unregister(struct clk *clk)
 	if (clk->core->protect_count)
 		pr_warn("%s: unregistering protected clock: %s\n",
 					__func__, clk->core->name);
+	clk_prepare_unlock();
 
 	kref_put(&clk->core->ref, __clk_release);
 	free_clk(clk);
-unlock:
-	clk_prepare_unlock();
 }
 EXPORT_SYMBOL_GPL(clk_unregister);
 
@@ -4471,13 +4471,11 @@ void __clk_put(struct clk *clk)
 	    clk->max_rate < clk->core->req_rate)
 		clk_core_set_rate_nolock(clk->core, clk->core->req_rate);
 
-	owner = clk->core->owner;
-	kref_put(&clk->core->ref, __clk_release);
-
 	clk_prepare_unlock();
 
+	owner = clk->core->owner;
+	kref_put(&clk->core->ref, __clk_release);
 	module_put(owner);
-
 	free_clk(clk);
 }
 
-- 
2.43.0

[PATCH 5.15 092/168] fs/9p: drop inodes immediately on non-.L too

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joakim Sindholt <opensource@zhasha.com>

[ Upstream commit 7fd524b9bd1be210fe79035800f4bd78a41b349f ]

Signed-off-by: Joakim Sindholt <opensource@zhasha.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/9p/vfs_super.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index 7449f7fd47d22..51ac2653984a7 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -340,6 +340,7 @@ static const struct super_operations v9fs_super_ops = {
 	.alloc_inode = v9fs_alloc_inode,
 	.free_inode = v9fs_free_inode,
 	.statfs = simple_statfs,
+	.drop_inode = v9fs_drop_inode,
 	.evict_inode = v9fs_evict_inode,
 	.show_options = v9fs_show_options,
 	.umount_begin = v9fs_umount_begin,
-- 
2.43.0

[PATCH 5.15 093/168] drm/nouveau/dp: Dont probe eDP ports twice harder

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lyude Paul <lyude@redhat.com>

[ Upstream commit bf52d7f9b2067f02efe7e32697479097aba4a055 ]

I didn't pay close enough attention the last time I tried to fix this
problem - while we currently do correctly take care to make sure we don't
probe a connected eDP port more then once, we don't do the same thing for
eDP ports we found to be disconnected.

So, fix this and make sure we only ever probe eDP ports once and then leave
them at that connector state forever (since without HPD, it's not going to
change on its own anyway). This should get rid of the last few GSP errors
getting spit out during runtime suspend and resume on some machines, as we
tried to reprobe eDP ports in response to ACPI hotplug probe events.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404233736.7946-3-lyude@redhat.com
(cherry picked from commit fe6660b661c3397af0867d5d098f5b26581f1290)
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nouveau_dp.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_dp.c b/drivers/gpu/drm/nouveau/nouveau_dp.c
index 447b7594b35ae..0107a21dc9f9b 100644
--- a/drivers/gpu/drm/nouveau/nouveau_dp.c
+++ b/drivers/gpu/drm/nouveau/nouveau_dp.c
@@ -109,12 +109,15 @@ nouveau_dp_detect(struct nouveau_connector *nv_connector,
 	u8 *dpcd = nv_encoder->dp.dpcd;
 	int ret = NOUVEAU_DP_NONE;
 
-	/* If we've already read the DPCD on an eDP device, we don't need to
-	 * reread it as it won't change
+	/* eDP ports don't support hotplugging - so there's no point in probing eDP ports unless we
+	 * haven't probed them once before.
 	 */
-	if (connector->connector_type == DRM_MODE_CONNECTOR_eDP &&
-	    dpcd[DP_DPCD_REV] != 0)
-		return NOUVEAU_DP_SST;
+	if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+		if (connector->status == connector_status_connected)
+			return NOUVEAU_DP_SST;
+		else if (connector->status == connector_status_disconnected)
+			return NOUVEAU_DP_NONE;
+	}
 
 	mutex_lock(&nv_encoder->dp.hpd_irq_lock);
 	if (mstm) {
-- 
2.43.0

[PATCH 5.15 094/168] net:usb:qmi_wwan: support Rolling modules

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vanillan Wang <vanillanwang@163.com>

[ Upstream commit d362046021ea122309da8c8e0b6850c792ca97b5 ]

Update the qmi_wwan driver support for the Rolling
LTE modules.

- VID:PID 33f8:0104, RW101-GL for laptop debug M.2 cards(with RMNET
interface for /Linux/Chrome OS)
0x0104: RMNET, diag, at, pipe

Here are the outputs of usb-devices:
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=33f8 ProdID=0104 Rev=05.04
S:  Manufacturer=Rolling Wireless S.a.r.l.
S:  Product=Rolling Module
S:  SerialNumber=ba2eb033
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

Signed-off-by: Vanillan Wang <vanillanwang@163.com>
Link: https://lore.kernel.org/r/20240416120713.24777-1-vanillanwang@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 846ace9830d3b..89e1fac07a255 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1419,6 +1419,7 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x0489, 0xe0b5, 0)},	/* Foxconn T77W968 LTE with eSIM support*/
 	{QMI_FIXED_INTF(0x2692, 0x9025, 4)},    /* Cellient MPL200 (rebranded Qualcomm 05c6:9025) */
 	{QMI_QUIRK_SET_DTR(0x1546, 0x1342, 4)},	/* u-blox LARA-L6 */
+	{QMI_QUIRK_SET_DTR(0x33f8, 0x0104, 4)}, /* Rolling RW101 RMNET */
 
 	/* 4. Gobi 1000 devices */
 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
-- 
2.43.0

[PATCH 5.15 095/168] bpf, sockmap: TCP data stall on recv before accept

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Fastabend <john.fastabend@gmail.com>

[ Upstream commit ea444185a6bf7da4dd0df1598ee953e4f7174858 ]

A common mechanism to put a TCP socket into the sockmap is to hook the
BPF_SOCK_OPS_{ACTIVE_PASSIVE}_ESTABLISHED_CB event with a BPF program
that can map the socket info to the correct BPF verdict parser. When
the user adds the socket to the map the psock is created and the new
ops are assigned to ensure the verdict program will 'see' the sk_buffs
as they arrive.

Part of this process hooks the sk_data_ready op with a BPF specific
handler to wake up the BPF verdict program when data is ready to read.
The logic is simple enough (posted here for easy reading)

 static void sk_psock_verdict_data_ready(struct sock *sk)
 {
	struct socket *sock = sk->sk_socket;

	if (unlikely(!sock || !sock->ops || !sock->ops->read_skb))
		return;
	sock->ops->read_skb(sk, sk_psock_verdict_recv);
 }

The oversight here is sk->sk_socket is not assigned until the application
accepts() the new socket. However, its entirely ok for the peer application
to do a connect() followed immediately by sends. The socket on the receiver
is sitting on the backlog queue of the listening socket until its accepted
and the data is queued up. If the peer never accepts the socket or is slow
it will eventually hit data limits and rate limit the session. But,
important for BPF sockmap hooks when this data is received TCP stack does
the sk_data_ready() call but the read_skb() for this data is never called
because sk_socket is missing. The data sits on the sk_receive_queue.

Then once the socket is accepted if we never receive more data from the
peer there will be no further sk_data_ready calls and all the data
is still on the sk_receive_queue(). Then user calls recvmsg after accept()
and for TCP sockets in sockmap we use the tcp_bpf_recvmsg_parser() handler.
The handler checks for data in the sk_msg ingress queue expecting that
the BPF program has already run from the sk_data_ready hook and enqueued
the data as needed. So we are stuck.

To fix do an unlikely check in recvmsg handler for data on the
sk_receive_queue and if it exists wake up data_ready. We have the sock
locked in both read_skb and recvmsg so should avoid having multiple
runners.

Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-7-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_bpf.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/net/ipv4/tcp_bpf.c b/net/ipv4/tcp_bpf.c
index e3a9477293ce4..89204004eeb5e 100644
--- a/net/ipv4/tcp_bpf.c
+++ b/net/ipv4/tcp_bpf.c
@@ -195,6 +195,26 @@ static int tcp_bpf_recvmsg_parser(struct sock *sk,
 		return tcp_recvmsg(sk, msg, len, nonblock, flags, addr_len);
 
 	lock_sock(sk);
+
+	/* We may have received data on the sk_receive_queue pre-accept and
+	 * then we can not use read_skb in this context because we haven't
+	 * assigned a sk_socket yet so have no link to the ops. The work-around
+	 * is to check the sk_receive_queue and in these cases read skbs off
+	 * queue again. The read_skb hook is not running at this point because
+	 * of lock_sock so we avoid having multiple runners in read_skb.
+	 */
+	if (unlikely(!skb_queue_empty(&sk->sk_receive_queue))) {
+		tcp_data_ready(sk);
+		/* This handles the ENOMEM errors if we both receive data
+		 * pre accept and are already under memory pressure. At least
+		 * let user know to retry.
+		 */
+		if (unlikely(!skb_queue_empty(&sk->sk_receive_queue))) {
+			copied = -EAGAIN;
+			goto out;
+		}
+	}
+
 msg_bytes_ready:
 	copied = sk_msg_recvmsg(sk, psock, msg, len, flags);
 	if (!copied) {
-- 
2.43.0

[PATCH 5.15 096/168] bpf, sockmap: Handle fin correctly

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Fastabend <john.fastabend@gmail.com>

[ Upstream commit 901546fd8f9ca4b5c481ce00928ab425ce9aacc0 ]

The sockmap code is returning EAGAIN after a FIN packet is received and no
more data is on the receive queue. Correct behavior is to return 0 to the
user and the user can then close the socket. The EAGAIN causes many apps
to retry which masks the problem. Eventually the socket is evicted from
the sockmap because its released from sockmap sock free handling. The
issue creates a delay and can cause some errors on application side.

To fix this check on sk_msg_recvmsg side if length is zero and FIN flag
is set then set return to zero. A selftest will be added to check this
condition.

Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: William Findlay <will@isovalent.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-6-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_bpf.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/net/ipv4/tcp_bpf.c b/net/ipv4/tcp_bpf.c
index 89204004eeb5e..5fdef5ddfbbe6 100644
--- a/net/ipv4/tcp_bpf.c
+++ b/net/ipv4/tcp_bpf.c
@@ -174,6 +174,24 @@ static int tcp_msg_wait_data(struct sock *sk, struct sk_psock *psock,
 	return ret;
 }
 
+static bool is_next_msg_fin(struct sk_psock *psock)
+{
+	struct scatterlist *sge;
+	struct sk_msg *msg_rx;
+	int i;
+
+	msg_rx = sk_psock_peek_msg(psock);
+	i = msg_rx->sg.start;
+	sge = sk_msg_elem(msg_rx, i);
+	if (!sge->length) {
+		struct sk_buff *skb = msg_rx->skb;
+
+		if (skb && TCP_SKB_CB(skb)->tcp_flags & TCPHDR_FIN)
+			return true;
+	}
+	return false;
+}
+
 static int tcp_bpf_recvmsg_parser(struct sock *sk,
 				  struct msghdr *msg,
 				  size_t len,
@@ -217,6 +235,19 @@ static int tcp_bpf_recvmsg_parser(struct sock *sk,
 
 msg_bytes_ready:
 	copied = sk_msg_recvmsg(sk, psock, msg, len, flags);
+	/* The typical case for EFAULT is the socket was gracefully
+	 * shutdown with a FIN pkt. So check here the other case is
+	 * some error on copy_page_to_iter which would be unexpected.
+	 * On fin return correct return code to zero.
+	 */
+	if (copied == -EFAULT) {
+		bool is_fin = is_next_msg_fin(psock);
+
+		if (is_fin) {
+			copied = 0;
+			goto out;
+		}
+	}
 	if (!copied) {
 		long timeo;
 		int data;
-- 
2.43.0

[PATCH 5.15 097/168] bpf, sockmap: Convert schedule_work into delayed_work

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Fastabend <john.fastabend@gmail.com>

[ Upstream commit 29173d07f79883ac94f5570294f98af3d4287382 ]

Sk_buffs are fed into sockmap verdict programs either from a strparser
(when the user might want to decide how framing of skb is done by attaching
another parser program) or directly through tcp_read_sock. The
tcp_read_sock is the preferred method for performance when the BPF logic is
a stream parser.

The flow for Cilium's common use case with a stream parser is,

 tcp_read_sock()
  sk_psock_verdict_recv
    ret = bpf_prog_run_pin_on_cpu()
    sk_psock_verdict_apply(sock, skb, ret)
     // if system is under memory pressure or app is slow we may
     // need to queue skb. Do this queuing through ingress_skb and
     // then kick timer to wake up handler
     skb_queue_tail(ingress_skb, skb)
     schedule_work(work);

The work queue is wired up to sk_psock_backlog(). This will then walk the
ingress_skb skb list that holds our sk_buffs that could not be handled,
but should be OK to run at some later point. However, its possible that
the workqueue doing this work still hits an error when sending the skb.
When this happens the skbuff is requeued on a temporary 'state' struct
kept with the workqueue. This is necessary because its possible to
partially send an skbuff before hitting an error and we need to know how
and where to restart when the workqueue runs next.

Now for the trouble, we don't rekick the workqueue. This can cause a
stall where the skbuff we just cached on the state variable might never
be sent. This happens when its the last packet in a flow and no further
packets come along that would cause the system to kick the workqueue from
that side.

To fix we could do simple schedule_work(), but while under memory pressure
it makes sense to back off some instead of continue to retry repeatedly. So
instead to fix convert schedule_work to schedule_delayed_work and add
backoff logic to reschedule from backlog queue on errors. Its not obvious
though what a good backoff is so use '1'.

To test we observed some flakes whil running NGINX compliance test with
sockmap we attributed these failed test to this bug and subsequent issue.

>From on list discussion. This commit

 bec217197b41("skmsg: Schedule psock work if the cached skb exists on the psock")

was intended to address similar race, but had a couple cases it missed.
Most obvious it only accounted for receiving traffic on the local socket
so if redirecting into another socket we could still get an sk_buff stuck
here. Next it missed the case where copied=0 in the recv() handler and
then we wouldn't kick the scheduler. Also its sub-optimal to require
userspace to kick the internal mechanisms of sockmap to wake it up and
copy data to user. It results in an extra syscall and requires the app
to actual handle the EAGAIN correctly.

Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: William Findlay <will@isovalent.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-3-john.fastabend@gmail.com
Stable-dep-of: 405df89dd52c ("bpf, sockmap: Improved check for empty queue")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/skmsg.h |  2 +-
 net/core/skmsg.c      | 21 ++++++++++++++-------
 net/core/sock_map.c   |  3 ++-
 3 files changed, 17 insertions(+), 9 deletions(-)

diff --git a/include/linux/skmsg.h b/include/linux/skmsg.h
index f18eb6a6f7631..07a8e7c695373 100644
--- a/include/linux/skmsg.h
+++ b/include/linux/skmsg.h
@@ -107,7 +107,7 @@ struct sk_psock {
 	struct proto			*sk_proto;
 	struct mutex			work_mutex;
 	struct sk_psock_work_state	work_state;
-	struct work_struct		work;
+	struct delayed_work		work;
 	struct rcu_work			rwork;
 };
 
diff --git a/net/core/skmsg.c b/net/core/skmsg.c
index 6bdb15b05a78d..e9fddceba390e 100644
--- a/net/core/skmsg.c
+++ b/net/core/skmsg.c
@@ -482,7 +482,7 @@ int sk_msg_recvmsg(struct sock *sk, struct sk_psock *psock, struct msghdr *msg,
 	}
 out:
 	if (psock->work_state.skb && copied > 0)
-		schedule_work(&psock->work);
+		schedule_delayed_work(&psock->work, 0);
 	return copied;
 }
 EXPORT_SYMBOL_GPL(sk_msg_recvmsg);
@@ -633,7 +633,8 @@ static void sk_psock_skb_state(struct sk_psock *psock,
 
 static void sk_psock_backlog(struct work_struct *work)
 {
-	struct sk_psock *psock = container_of(work, struct sk_psock, work);
+	struct delayed_work *dwork = to_delayed_work(work);
+	struct sk_psock *psock = container_of(dwork, struct sk_psock, work);
 	struct sk_psock_work_state *state = &psock->work_state;
 	struct sk_buff *skb = NULL;
 	bool ingress;
@@ -673,6 +674,12 @@ static void sk_psock_backlog(struct work_struct *work)
 				if (ret == -EAGAIN) {
 					sk_psock_skb_state(psock, state, skb,
 							   len, off);
+
+					/* Delay slightly to prioritize any
+					 * other work that might be here.
+					 */
+					if (sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED))
+						schedule_delayed_work(&psock->work, 1);
 					goto end;
 				}
 				/* Hard errors break pipe and stop xmit. */
@@ -727,7 +734,7 @@ struct sk_psock *sk_psock_init(struct sock *sk, int node)
 	INIT_LIST_HEAD(&psock->link);
 	spin_lock_init(&psock->link_lock);
 
-	INIT_WORK(&psock->work, sk_psock_backlog);
+	INIT_DELAYED_WORK(&psock->work, sk_psock_backlog);
 	mutex_init(&psock->work_mutex);
 	INIT_LIST_HEAD(&psock->ingress_msg);
 	spin_lock_init(&psock->ingress_lock);
@@ -816,7 +823,7 @@ static void sk_psock_destroy(struct work_struct *work)
 
 	sk_psock_done_strp(psock);
 
-	cancel_work_sync(&psock->work);
+	cancel_delayed_work_sync(&psock->work);
 	mutex_destroy(&psock->work_mutex);
 
 	psock_progs_drop(&psock->progs);
@@ -931,7 +938,7 @@ static int sk_psock_skb_redirect(struct sk_psock *from, struct sk_buff *skb)
 	}
 
 	skb_queue_tail(&psock_other->ingress_skb, skb);
-	schedule_work(&psock_other->work);
+	schedule_delayed_work(&psock_other->work, 0);
 	spin_unlock_bh(&psock_other->ingress_lock);
 	return 0;
 }
@@ -1011,7 +1018,7 @@ static int sk_psock_verdict_apply(struct sk_psock *psock, struct sk_buff *skb,
 			spin_lock_bh(&psock->ingress_lock);
 			if (sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED)) {
 				skb_queue_tail(&psock->ingress_skb, skb);
-				schedule_work(&psock->work);
+				schedule_delayed_work(&psock->work, 0);
 				err = 0;
 			}
 			spin_unlock_bh(&psock->ingress_lock);
@@ -1042,7 +1049,7 @@ static void sk_psock_write_space(struct sock *sk)
 	psock = sk_psock(sk);
 	if (likely(psock)) {
 		if (sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED))
-			schedule_work(&psock->work);
+			schedule_delayed_work(&psock->work, 0);
 		write_space = psock->saved_write_space;
 	}
 	rcu_read_unlock();
diff --git a/net/core/sock_map.c b/net/core/sock_map.c
index 4e42bc679bac9..2ded250ac0d2b 100644
--- a/net/core/sock_map.c
+++ b/net/core/sock_map.c
@@ -1577,9 +1577,10 @@ void sock_map_close(struct sock *sk, long timeout)
 		rcu_read_unlock();
 		sk_psock_stop(psock);
 		release_sock(sk);
-		cancel_work_sync(&psock->work);
+		cancel_delayed_work_sync(&psock->work);
 		sk_psock_put(sk, psock);
 	}
+
 	/* Make sure we do not recurse. This is a bug.
 	 * Leak the socket instead of crashing on a stack overflow.
 	 */
-- 
2.43.0

[PATCH 5.15 098/168] bpf, sockmap: Reschedule is now done through backlog

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Fastabend <john.fastabend@gmail.com>

[ Upstream commit bce22552f92ea7c577f49839b8e8f7d29afaf880 ]

Now that the backlog manages the reschedule() logic correctly we can drop
the partial fix to reschedule from recvmsg hook.

Rescheduling on recvmsg hook was added to address a corner case where we
still had data in the backlog state but had nothing to kick it and
reschedule the backlog worker to run and finish copying data out of the
state. This had a couple limitations, first it required user space to
kick it introducing an unnecessary EBUSY and retry. Second it only
handled the ingress case and egress redirects would still be hung.

With the correct fix, pushing the reschedule logic down to where the
enomem error occurs we can drop this fix.

Fixes: bec217197b412 ("skmsg: Schedule psock work if the cached skb exists on the psock")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-4-john.fastabend@gmail.com
Stable-dep-of: 405df89dd52c ("bpf, sockmap: Improved check for empty queue")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/skmsg.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/net/core/skmsg.c b/net/core/skmsg.c
index e9fddceba390e..51ab1e617d922 100644
--- a/net/core/skmsg.c
+++ b/net/core/skmsg.c
@@ -481,8 +481,6 @@ int sk_msg_recvmsg(struct sock *sk, struct sk_psock *psock, struct msghdr *msg,
 		msg_rx = sk_psock_peek_msg(psock);
 	}
 out:
-	if (psock->work_state.skb && copied > 0)
-		schedule_delayed_work(&psock->work, 0);
 	return copied;
 }
 EXPORT_SYMBOL_GPL(sk_msg_recvmsg);
-- 
2.43.0

[PATCH 5.15 099/168] bpf, sockmap: Improved check for empty queue

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Fastabend <john.fastabend@gmail.com>

[ Upstream commit 405df89dd52cbcd69a3cd7d9a10d64de38f854b2 ]

We noticed some rare sk_buffs were stepping past the queue when system was
under memory pressure. The general theory is to skip enqueueing
sk_buffs when its not necessary which is the normal case with a system
that is properly provisioned for the task, no memory pressure and enough
cpu assigned.

But, if we can't allocate memory due to an ENOMEM error when enqueueing
the sk_buff into the sockmap receive queue we push it onto a delayed
workqueue to retry later. When a new sk_buff is received we then check
if that queue is empty. However, there is a problem with simply checking
the queue length. When a sk_buff is being processed from the ingress queue
but not yet on the sockmap msg receive queue its possible to also recv
a sk_buff through normal path. It will check the ingress queue which is
zero and then skip ahead of the pkt being processed.

Previously we used sock lock from both contexts which made the problem
harder to hit, but not impossible.

To fix instead of popping the skb from the queue entirely we peek the
skb from the queue and do the copy there. This ensures checks to the
queue length are non-zero while skb is being processed. Then finally
when the entire skb has been copied to user space queue or another
socket we pop it off the queue. This way the queue length check allows
bypassing the queue only after the list has been completely processed.

To reproduce issue we run NGINX compliance test with sockmap running and
observe some flakes in our testing that we attributed to this issue.

Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: William Findlay <will@isovalent.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-5-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/skmsg.h |  1 -
 net/core/skmsg.c      | 32 ++++++++------------------------
 2 files changed, 8 insertions(+), 25 deletions(-)

diff --git a/include/linux/skmsg.h b/include/linux/skmsg.h
index 07a8e7c695373..422b391d931fe 100644
--- a/include/linux/skmsg.h
+++ b/include/linux/skmsg.h
@@ -73,7 +73,6 @@ struct sk_psock_link {
 };
 
 struct sk_psock_work_state {
-	struct sk_buff			*skb;
 	u32				len;
 	u32				off;
 };
diff --git a/net/core/skmsg.c b/net/core/skmsg.c
index 51ab1e617d922..675fd86279d87 100644
--- a/net/core/skmsg.c
+++ b/net/core/skmsg.c
@@ -615,16 +615,12 @@ static int sk_psock_handle_skb(struct sk_psock *psock, struct sk_buff *skb,
 
 static void sk_psock_skb_state(struct sk_psock *psock,
 			       struct sk_psock_work_state *state,
-			       struct sk_buff *skb,
 			       int len, int off)
 {
 	spin_lock_bh(&psock->ingress_lock);
 	if (sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED)) {
-		state->skb = skb;
 		state->len = len;
 		state->off = off;
-	} else {
-		sock_drop(psock->sk, skb);
 	}
 	spin_unlock_bh(&psock->ingress_lock);
 }
@@ -635,23 +631,17 @@ static void sk_psock_backlog(struct work_struct *work)
 	struct sk_psock *psock = container_of(dwork, struct sk_psock, work);
 	struct sk_psock_work_state *state = &psock->work_state;
 	struct sk_buff *skb = NULL;
+	u32 len = 0, off = 0;
 	bool ingress;
-	u32 len, off;
 	int ret;
 
 	mutex_lock(&psock->work_mutex);
-	if (unlikely(state->skb)) {
-		spin_lock_bh(&psock->ingress_lock);
-		skb = state->skb;
+	if (unlikely(state->len)) {
 		len = state->len;
 		off = state->off;
-		state->skb = NULL;
-		spin_unlock_bh(&psock->ingress_lock);
 	}
-	if (skb)
-		goto start;
 
-	while ((skb = skb_dequeue(&psock->ingress_skb))) {
+	while ((skb = skb_peek(&psock->ingress_skb))) {
 		len = skb->len;
 		off = 0;
 		if (skb_bpf_strparser(skb)) {
@@ -660,7 +650,6 @@ static void sk_psock_backlog(struct work_struct *work)
 			off = stm->offset;
 			len = stm->full_len;
 		}
-start:
 		ingress = skb_bpf_ingress(skb);
 		skb_bpf_redirect_clear(skb);
 		do {
@@ -670,8 +659,7 @@ static void sk_psock_backlog(struct work_struct *work)
 							  len, ingress);
 			if (ret <= 0) {
 				if (ret == -EAGAIN) {
-					sk_psock_skb_state(psock, state, skb,
-							   len, off);
+					sk_psock_skb_state(psock, state, len, off);
 
 					/* Delay slightly to prioritize any
 					 * other work that might be here.
@@ -683,15 +671,16 @@ static void sk_psock_backlog(struct work_struct *work)
 				/* Hard errors break pipe and stop xmit. */
 				sk_psock_report_error(psock, ret ? -ret : EPIPE);
 				sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED);
-				sock_drop(psock->sk, skb);
 				goto end;
 			}
 			off += ret;
 			len -= ret;
 		} while (len);
 
-		if (!ingress)
+		skb = skb_dequeue(&psock->ingress_skb);
+		if (!ingress) {
 			kfree_skb(skb);
+		}
 	}
 end:
 	mutex_unlock(&psock->work_mutex);
@@ -784,11 +773,6 @@ static void __sk_psock_zap_ingress(struct sk_psock *psock)
 		skb_bpf_redirect_clear(skb);
 		sock_drop(psock->sk, skb);
 	}
-	kfree_skb(psock->work_state.skb);
-	/* We null the skb here to ensure that calls to sk_psock_backlog
-	 * do not pick up the free'd skb.
-	 */
-	psock->work_state.skb = NULL;
 	__sk_psock_purge_ingress_msg(psock);
 }
 
@@ -807,7 +791,6 @@ void sk_psock_stop(struct sk_psock *psock)
 	spin_lock_bh(&psock->ingress_lock);
 	sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED);
 	sk_psock_cork_free(psock);
-	__sk_psock_zap_ingress(psock);
 	spin_unlock_bh(&psock->ingress_lock);
 }
 
@@ -822,6 +805,7 @@ static void sk_psock_destroy(struct work_struct *work)
 	sk_psock_done_strp(psock);
 
 	cancel_delayed_work_sync(&psock->work);
+	__sk_psock_zap_ingress(psock);
 	mutex_destroy(&psock->work_mutex);
 
 	psock_progs_drop(&psock->progs);
-- 
2.43.0

[PATCH 5.15 100/168] ASoC: meson: axg-card: Fix nonatomic links

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit 0c9b152c72e53016e96593bdbb8cffe2176694b9 ]

This commit e138233e56e9829e65b6293887063a1a3ccb2d68 causes the
following system crash when using audio on G12A/G12B & SM1 systems:

 BUG: sleeping function called from invalid context at kernel/locking/mutex.c:282
  in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/0
 preempt_count: 10001, expected: 0
 RCU nest depth: 0, expected: 0
 Preemption disabled at:
 schedule_preempt_disabled+0x20/0x2c

 mutex_lock+0x24/0x60
 _snd_pcm_stream_lock_irqsave+0x20/0x3c
 snd_pcm_period_elapsed+0x24/0xa4
 axg_fifo_pcm_irq_block+0x64/0xdc
 __handle_irq_event_percpu+0x104/0x264
 handle_irq_event+0x48/0xb4
 ...
 start_kernel+0x3f0/0x484
 __primary_switched+0xc0/0xc8

Revert this commit until the crash is fixed.

Fixes: e138233e56e9829e65b6 ("ASoC: meson: axg-card: make links nonatomic")
Reported-by: Dmitry Shmidt <dimitrysh@google.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20220421155725.2589089-2-narmstrong@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/axg-card.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/sound/soc/meson/axg-card.c b/sound/soc/meson/axg-card.c
index cbbaa55d92a66..2b77010c2c5ce 100644
--- a/sound/soc/meson/axg-card.c
+++ b/sound/soc/meson/axg-card.c
@@ -320,7 +320,6 @@ static int axg_card_add_link(struct snd_soc_card *card, struct device_node *np,
 
 	dai_link->cpus = cpu;
 	dai_link->num_cpus = 1;
-	dai_link->nonatomic = true;
 
 	ret = meson_card_parse_dai(card, np, &dai_link->cpus->of_node,
 				   &dai_link->cpus->dai_name);
-- 
2.43.0

[PATCH 5.15 101/168] ASoC: meson: axg-tdm-interface: Fix formatters in trigger"

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit c26830b6c5c534d273ce007eb33d5a2d2ad4e969 ]

This reverts commit bf5e4887eeddb48480568466536aa08ec7f179a5 because
the following and required commit e138233e56e9829e65b6293887063a1a3ccb2d68
causes the following system crash when using audio:
 BUG: sleeping function called from invalid context at kernel/locking/mutex.c:282

Fixes: bf5e4887eeddb4848056846 ("ASoC: meson: axg-tdm-interface: manage formatters in trigger")
Reported-by: Dmitry Shmidt <dimitrysh@google.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20220421155725.2589089-1-narmstrong@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/axg-tdm-interface.c | 26 +++++---------------------
 1 file changed, 5 insertions(+), 21 deletions(-)

diff --git a/sound/soc/meson/axg-tdm-interface.c b/sound/soc/meson/axg-tdm-interface.c
index f5145902360de..60d132ab1ab78 100644
--- a/sound/soc/meson/axg-tdm-interface.c
+++ b/sound/soc/meson/axg-tdm-interface.c
@@ -362,29 +362,13 @@ static int axg_tdm_iface_hw_free(struct snd_pcm_substream *substream,
 	return 0;
 }
 
-static int axg_tdm_iface_trigger(struct snd_pcm_substream *substream,
-				 int cmd,
+static int axg_tdm_iface_prepare(struct snd_pcm_substream *substream,
 				 struct snd_soc_dai *dai)
 {
-	struct axg_tdm_stream *ts =
-		snd_soc_dai_get_dma_data(dai, substream);
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-	case SNDRV_PCM_TRIGGER_RESUME:
-	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		axg_tdm_stream_start(ts);
-		break;
-	case SNDRV_PCM_TRIGGER_SUSPEND:
-	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-	case SNDRV_PCM_TRIGGER_STOP:
-		axg_tdm_stream_stop(ts);
-		break;
-	default:
-		return -EINVAL;
-	}
+	struct axg_tdm_stream *ts = snd_soc_dai_get_dma_data(dai, substream);
 
-	return 0;
+	/* Force all attached formatters to update */
+	return axg_tdm_stream_reset(ts);
 }
 
 static int axg_tdm_iface_remove_dai(struct snd_soc_dai *dai)
@@ -424,8 +408,8 @@ static const struct snd_soc_dai_ops axg_tdm_iface_ops = {
 	.set_fmt	= axg_tdm_iface_set_fmt,
 	.startup	= axg_tdm_iface_startup,
 	.hw_params	= axg_tdm_iface_hw_params,
+	.prepare	= axg_tdm_iface_prepare,
 	.hw_free	= axg_tdm_iface_hw_free,
-	.trigger	= axg_tdm_iface_trigger,
 };
 
 /* TDM Backend DAIs */
-- 
2.43.0

[PATCH 5.15 102/168] qibfs: fix dentry leak

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@zeniv.linux.org.uk>

[ Upstream commit aa23317d0268b309bb3f0801ddd0d61813ff5afb ]

simple_recursive_removal() drops the pinning references to all positives
in subtree.  For the cases when its argument has been kept alive by
the pinning alone that's exactly the right thing to do, but here
the argument comes from dcache lookup, that needs to be balanced by
explicit dput().

Fixes: e41d237818598 "qib_fs: switch to simple_recursive_removal()"
Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/qib/qib_fs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/hw/qib/qib_fs.c b/drivers/infiniband/hw/qib/qib_fs.c
index a0c5f3bdc3246..8665e506404f9 100644
--- a/drivers/infiniband/hw/qib/qib_fs.c
+++ b/drivers/infiniband/hw/qib/qib_fs.c
@@ -441,6 +441,7 @@ static int remove_device_files(struct super_block *sb,
 		return PTR_ERR(dir);
 	}
 	simple_recursive_removal(dir, NULL);
+	dput(dir);
 	return 0;
 }
 
-- 
2.43.0

[PATCH 5.15 103/168] xfrm: Preserve vlan tags for transport mode software GRO

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Davey <paul.davey@alliedtelesis.co.nz>

[ Upstream commit 58fbfecab965014b6e3cc956a76b4a96265a1add ]

The software GRO path for esp transport mode uses skb_mac_header_rebuild
prior to re-injecting the packet via the xfrm_napi_dev.  This only
copies skb->mac_len bytes of header which may not be sufficient if the
packet contains 802.1Q tags or other VLAN tags.  Worse copying only the
initial header will leave a packet marked as being VLAN tagged but
without the corresponding tag leading to mangling when it is later
untagged.

The VLAN tags are important when receiving the decrypted esp transport
mode packet after GRO processing to ensure it is received on the correct
interface.

Therefore record the full mac header length in xfrm*_transport_input for
later use in corresponding xfrm*_transport_finish to copy the entire mac
header when rebuilding the mac header for GRO.  The skb->data pointer is
left pointing skb->mac_header bytes after the start of the mac header as
is expected by the network stack and network and transport header
offsets reset to this location.

Fixes: 7785bba299a8 ("esp: Add a software GRO codepath")
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/skbuff.h | 15 +++++++++++++++
 include/net/xfrm.h     |  3 +++
 net/ipv4/xfrm4_input.c |  6 +++++-
 net/ipv6/xfrm6_input.c |  6 +++++-
 net/xfrm/xfrm_input.c  |  8 ++++++++
 5 files changed, 36 insertions(+), 2 deletions(-)

diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 7ed1d4472c0c8..15de91c65a09a 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2735,6 +2735,21 @@ static inline void skb_mac_header_rebuild(struct sk_buff *skb)
 	}
 }
 
+/* Move the full mac header up to current network_header.
+ * Leaves skb->data pointing at offset skb->mac_len into the mac_header.
+ * Must be provided the complete mac header length.
+ */
+static inline void skb_mac_header_rebuild_full(struct sk_buff *skb, u32 full_mac_len)
+{
+	if (skb_mac_header_was_set(skb)) {
+		const unsigned char *old_mac = skb_mac_header(skb);
+
+		skb_set_mac_header(skb, -full_mac_len);
+		memmove(skb_mac_header(skb), old_mac, full_mac_len);
+		__skb_push(skb, full_mac_len - skb->mac_len);
+	}
+}
+
 static inline int skb_checksum_start_offset(const struct sk_buff *skb)
 {
 	return skb->csum_start - skb_headroom(skb);
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 6156ed2950f97..2e2e30d31a763 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -1019,6 +1019,9 @@ struct xfrm_offload {
 #define CRYPTO_INVALID_PACKET_SYNTAX		64
 #define CRYPTO_INVALID_PROTOCOL			128
 
+	/* Used to keep whole l2 header for transport mode GRO */
+	__u32			orig_mac_len;
+
 	__u8			proto;
 	__u8			inner_ipproto;
 };
diff --git a/net/ipv4/xfrm4_input.c b/net/ipv4/xfrm4_input.c
index eac206a290d05..1f50517289fd9 100644
--- a/net/ipv4/xfrm4_input.c
+++ b/net/ipv4/xfrm4_input.c
@@ -61,7 +61,11 @@ int xfrm4_transport_finish(struct sk_buff *skb, int async)
 	ip_send_check(iph);
 
 	if (xo && (xo->flags & XFRM_GRO)) {
-		skb_mac_header_rebuild(skb);
+		/* The full l2 header needs to be preserved so that re-injecting the packet at l2
+		 * works correctly in the presence of vlan tags.
+		 */
+		skb_mac_header_rebuild_full(skb, xo->orig_mac_len);
+		skb_reset_network_header(skb);
 		skb_reset_transport_header(skb);
 		return 0;
 	}
diff --git a/net/ipv6/xfrm6_input.c b/net/ipv6/xfrm6_input.c
index 4907ab241d6be..7dbefbb338ca5 100644
--- a/net/ipv6/xfrm6_input.c
+++ b/net/ipv6/xfrm6_input.c
@@ -56,7 +56,11 @@ int xfrm6_transport_finish(struct sk_buff *skb, int async)
 	skb_postpush_rcsum(skb, skb_network_header(skb), nhlen);
 
 	if (xo && (xo->flags & XFRM_GRO)) {
-		skb_mac_header_rebuild(skb);
+		/* The full l2 header needs to be preserved so that re-injecting the packet at l2
+		 * works correctly in the presence of vlan tags.
+		 */
+		skb_mac_header_rebuild_full(skb, xo->orig_mac_len);
+		skb_reset_network_header(skb);
 		skb_reset_transport_header(skb);
 		return 0;
 	}
diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c
index a6861832710d9..7f326a01cbcea 100644
--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
@@ -400,11 +400,15 @@ static int xfrm_prepare_input(struct xfrm_state *x, struct sk_buff *skb)
  */
 static int xfrm4_transport_input(struct xfrm_state *x, struct sk_buff *skb)
 {
+	struct xfrm_offload *xo = xfrm_offload(skb);
 	int ihl = skb->data - skb_transport_header(skb);
 
 	if (skb->transport_header != skb->network_header) {
 		memmove(skb_transport_header(skb),
 			skb_network_header(skb), ihl);
+		if (xo)
+			xo->orig_mac_len =
+				skb_mac_header_was_set(skb) ? skb_mac_header_len(skb) : 0;
 		skb->network_header = skb->transport_header;
 	}
 	ip_hdr(skb)->tot_len = htons(skb->len + ihl);
@@ -415,11 +419,15 @@ static int xfrm4_transport_input(struct xfrm_state *x, struct sk_buff *skb)
 static int xfrm6_transport_input(struct xfrm_state *x, struct sk_buff *skb)
 {
 #if IS_ENABLED(CONFIG_IPV6)
+	struct xfrm_offload *xo = xfrm_offload(skb);
 	int ihl = skb->data - skb_transport_header(skb);
 
 	if (skb->transport_header != skb->network_header) {
 		memmove(skb_transport_header(skb),
 			skb_network_header(skb), ihl);
+		if (xo)
+			xo->orig_mac_len =
+				skb_mac_header_was_set(skb) ? skb_mac_header_len(skb) : 0;
 		skb->network_header = skb->transport_header;
 	}
 	ipv6_hdr(skb)->payload_len = htons(skb->len + ihl -
-- 
2.43.0

[PATCH 5.15 104/168] ARM: 9381/1: kasan: clear stale stack poison

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Boy.Wu <boy.wu@mediatek.com>

[ Upstream commit c4238686f9093b98bd6245a348bcf059cdce23af ]

We found below OOB crash:

[   33.452494] ==================================================================
[   33.453513] BUG: KASAN: stack-out-of-bounds in refresh_cpu_vm_stats.constprop.0+0xcc/0x2ec
[   33.454660] Write of size 164 at addr c1d03d30 by task swapper/0/0
[   33.455515]
[   33.455767] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O       6.1.25-mainline #1
[   33.456880] Hardware name: Generic DT based system
[   33.457555]  unwind_backtrace from show_stack+0x18/0x1c
[   33.458326]  show_stack from dump_stack_lvl+0x40/0x4c
[   33.459072]  dump_stack_lvl from print_report+0x158/0x4a4
[   33.459863]  print_report from kasan_report+0x9c/0x148
[   33.460616]  kasan_report from kasan_check_range+0x94/0x1a0
[   33.461424]  kasan_check_range from memset+0x20/0x3c
[   33.462157]  memset from refresh_cpu_vm_stats.constprop.0+0xcc/0x2ec
[   33.463064]  refresh_cpu_vm_stats.constprop.0 from tick_nohz_idle_stop_tick+0x180/0x53c
[   33.464181]  tick_nohz_idle_stop_tick from do_idle+0x264/0x354
[   33.465029]  do_idle from cpu_startup_entry+0x20/0x24
[   33.465769]  cpu_startup_entry from rest_init+0xf0/0xf4
[   33.466528]  rest_init from arch_post_acpi_subsys_init+0x0/0x18
[   33.467397]
[   33.467644] The buggy address belongs to stack of task swapper/0/0
[   33.468493]  and is located at offset 112 in frame:
[   33.469172]  refresh_cpu_vm_stats.constprop.0+0x0/0x2ec
[   33.469917]
[   33.470165] This frame has 2 objects:
[   33.470696]  [32, 76) 'global_zone_diff'
[   33.470729]  [112, 276) 'global_node_diff'
[   33.471294]
[   33.472095] The buggy address belongs to the physical page:
[   33.472862] page:3cd72da8 refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x41d03
[   33.473944] flags: 0x1000(reserved|zone=0)
[   33.474565] raw: 00001000 ed741470 ed741470 00000000 00000000 00000000 ffffffff 00000001
[   33.475656] raw: 00000000
[   33.476050] page dumped because: kasan: bad access detected
[   33.476816]
[   33.477061] Memory state around the buggy address:
[   33.477732]  c1d03c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   33.478630]  c1d03c80: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00
[   33.479526] >c1d03d00: 00 04 f2 f2 f2 f2 00 00 00 00 00 00 f1 f1 f1 f1
[   33.480415]                                                ^
[   33.481195]  c1d03d80: 00 00 00 00 00 00 00 00 00 00 04 f3 f3 f3 f3 f3
[   33.482088]  c1d03e00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
[   33.482978] ==================================================================

We find the root cause of this OOB is that arm does not clear stale stack
poison in the case of cpuidle.

This patch refer to arch/arm64/kernel/sleep.S to resolve this issue.

>From cited commit [1] that explain the problem

Functions which the compiler has instrumented for KASAN place poison on
the stack shadow upon entry and remove this poison prior to returning.

In the case of cpuidle, CPUs exit the kernel a number of levels deep in
C code.  Any instrumented functions on this critical path will leave
portions of the stack shadow poisoned.

If CPUs lose context and return to the kernel via a cold path, we
restore a prior context saved in __cpu_suspend_enter are forgotten, and
we never remove the poison they placed in the stack shadow area by
functions calls between this and the actual exit of the kernel.

Thus, (depending on stackframe layout) subsequent calls to instrumented
functions may hit this stale poison, resulting in (spurious) KASAN
splats to the console.

To avoid this, clear any stale poison from the idle thread for a CPU
prior to bringing a CPU online.

>From cited commit [2]

Extend to check for CONFIG_KASAN_STACK

[1] commit 0d97e6d8024c ("arm64: kasan: clear stale stack poison")
[2] commit d56a9ef84bd0 ("kasan, arm64: unpoison stack only with CONFIG_KASAN_STACK")

Signed-off-by: Boy Wu <boy.wu@mediatek.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 5615f69bc209 ("ARM: 9016/2: Initialize the mapping of KASan shadow memory")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/kernel/sleep.S | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index 43077e11dafda..2acf880fcc344 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -114,6 +114,10 @@ ENDPROC(cpu_resume_mmu)
 	.popsection
 cpu_resume_after_mmu:
 	bl	cpu_init		@ restore the und/abt/irq banked regs
+#if defined(CONFIG_KASAN) && defined(CONFIG_KASAN_STACK)
+	mov	r0, sp
+	bl	kasan_unpoison_task_stack_below
+#endif
 	mov	r0, #0			@ return zero on success
 	ldmfd	sp!, {r4 - r11, pc}
 ENDPROC(cpu_resume_after_mmu)
-- 
2.43.0

[PATCH 5.15 105/168] tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 94062790aedb505bdda209b10bea47b294d6394f ]

TCP_SYN_RECV state is really special, it is only used by
cross-syn connections, mostly used by fuzzers.

In the following crash [1], syzbot managed to trigger a divide
by zero in tcp_rcv_space_adjust()

A socket makes the following state transitions,
without ever calling tcp_init_transfer(),
meaning tcp_init_buffer_space() is also not called.

         TCP_CLOSE
connect()
         TCP_SYN_SENT
         TCP_SYN_RECV
shutdown() -> tcp_shutdown(sk, SEND_SHUTDOWN)
         TCP_FIN_WAIT1

To fix this issue, change tcp_shutdown() to not
perform a TCP_SYN_RECV -> TCP_FIN_WAIT1 transition,
which makes no sense anyway.

When tcp_rcv_state_process() later changes socket state
from TCP_SYN_RECV to TCP_ESTABLISH, then look at
sk->sk_shutdown to finally enter TCP_FIN_WAIT1 state,
and send a FIN packet from a sane socket state.

This means tcp_send_fin() can now be called from BH
context, and must use GFP_ATOMIC allocations.

[1]
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 1 PID: 5084 Comm: syz-executor358 Not tainted 6.9.0-rc6-syzkaller-00022-g98369dccd2f8 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
 RIP: 0010:tcp_rcv_space_adjust+0x2df/0x890 net/ipv4/tcp_input.c:767
Code: e3 04 4c 01 eb 48 8b 44 24 38 0f b6 04 10 84 c0 49 89 d5 0f 85 a5 03 00 00 41 8b 8e c8 09 00 00 89 e8 29 c8 48 0f af c3 31 d2 <48> f7 f1 48 8d 1c 43 49 8d 96 76 08 00 00 48 89 d0 48 c1 e8 03 48
RSP: 0018:ffffc900031ef3f0 EFLAGS: 00010246
RAX: 0c677a10441f8f42 RBX: 000000004fb95e7e RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000027d4b11f R08: ffffffff89e535a4 R09: 1ffffffff25e6ab7
R10: dffffc0000000000 R11: ffffffff8135e920 R12: ffff88802a9f8d30
R13: dffffc0000000000 R14: ffff88802a9f8d00 R15: 1ffff1100553f2da
FS:  00005555775c0380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1155bf2304 CR3: 000000002b9f2000 CR4: 0000000000350ef0
Call Trace:
 <TASK>
  tcp_recvmsg_locked+0x106d/0x25a0 net/ipv4/tcp.c:2513
  tcp_recvmsg+0x25d/0x920 net/ipv4/tcp.c:2578
  inet6_recvmsg+0x16a/0x730 net/ipv6/af_inet6.c:680
  sock_recvmsg_nosec net/socket.c:1046 [inline]
  sock_recvmsg+0x109/0x280 net/socket.c:1068
  ____sys_recvmsg+0x1db/0x470 net/socket.c:2803
  ___sys_recvmsg net/socket.c:2845 [inline]
  do_recvmmsg+0x474/0xae0 net/socket.c:2939
  __sys_recvmmsg net/socket.c:3018 [inline]
  __do_sys_recvmmsg net/socket.c:3041 [inline]
  __se_sys_recvmmsg net/socket.c:3034 [inline]
  __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3034
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7faeb6363db9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffcc1997168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007faeb6363db9
RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000005
RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000001c
R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000001

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20240501125448.896529-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp.c        |    4 ++--
 net/ipv4/tcp_input.c  |    2 ++
 net/ipv4/tcp_output.c |    4 +++-
 3 files changed, 7 insertions(+), 3 deletions(-)

--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2692,7 +2692,7 @@ void tcp_shutdown(struct sock *sk, int h
 	/* If we've already sent a FIN, or it's a closed state, skip this. */
 	if ((1 << sk->sk_state) &
 	    (TCPF_ESTABLISHED | TCPF_SYN_SENT |
-	     TCPF_SYN_RECV | TCPF_CLOSE_WAIT)) {
+	     TCPF_CLOSE_WAIT)) {
 		/* Clear out any half completed packets.  FIN if needed. */
 		if (tcp_close_state(sk))
 			tcp_send_fin(sk);
@@ -2803,7 +2803,7 @@ void __tcp_close(struct sock *sk, long t
 		 * machine. State transitions:
 		 *
 		 * TCP_ESTABLISHED -> TCP_FIN_WAIT1
-		 * TCP_SYN_RECV	-> TCP_FIN_WAIT1 (forget it, it's impossible)
+		 * TCP_SYN_RECV	-> TCP_FIN_WAIT1 (it is difficult)
 		 * TCP_CLOSE_WAIT -> TCP_LAST_ACK
 		 *
 		 * are legal only when FIN has been sent (i.e. in window),
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -6543,6 +6543,8 @@ int tcp_rcv_state_process(struct sock *s
 
 		tcp_initialize_rcv_mss(sk);
 		tcp_fast_path_on(tp);
+		if (sk->sk_shutdown & SEND_SHUTDOWN)
+			tcp_shutdown(sk, SEND_SHUTDOWN);
 		break;
 
 	case TCP_FIN_WAIT1: {
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -3441,7 +3441,9 @@ void tcp_send_fin(struct sock *sk)
 			return;
 		}
 	} else {
-		skb = alloc_skb_fclone(MAX_TCP_HEADER, sk->sk_allocation);
+		skb = alloc_skb_fclone(MAX_TCP_HEADER,
+				       sk_gfp_mask(sk, GFP_ATOMIC |
+						       __GFP_NOWARN));
 		if (unlikely(!skb))
 			return;
 

[PATCH 5.15 106/168] tcp: Use refcount_inc_not_zero() in tcp_twsk_unique().

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit f2db7230f73a80dbb179deab78f88a7947f0ab7e ]

Anderson Nascimento reported a use-after-free splat in tcp_twsk_unique()
with nice analysis.

Since commit ec94c2696f0b ("tcp/dccp: avoid one atomic operation for
timewait hashdance"), inet_twsk_hashdance() sets TIME-WAIT socket's
sk_refcnt after putting it into ehash and releasing the bucket lock.

Thus, there is a small race window where other threads could try to
reuse the port during connect() and call sock_hold() in tcp_twsk_unique()
for the TIME-WAIT socket with zero refcnt.

If that happens, the refcnt taken by tcp_twsk_unique() is overwritten
and sock_put() will cause underflow, triggering a real use-after-free
somewhere else.

To avoid the use-after-free, we need to use refcount_inc_not_zero() in
tcp_twsk_unique() and give up on reusing the port if it returns false.

[0]:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 0 PID: 1039313 at lib/refcount.c:25 refcount_warn_saturate+0xe5/0x110
CPU: 0 PID: 1039313 Comm: trigger Not tainted 6.8.6-200.fc39.x86_64 #1
Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.21805430.B64.2305221830 05/22/2023
RIP: 0010:refcount_warn_saturate+0xe5/0x110
Code: 42 8e ff 0f 0b c3 cc cc cc cc 80 3d aa 13 ea 01 00 0f 85 5e ff ff ff 48 c7 c7 f8 8e b7 82 c6 05 96 13 ea 01 01 e8 7b 42 8e ff <0f> 0b c3 cc cc cc cc 48 c7 c7 50 8f b7 82 c6 05 7a 13 ea 01 01 e8
RSP: 0018:ffffc90006b43b60 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff888009bb3ef0 RCX: 0000000000000027
RDX: ffff88807be218c8 RSI: 0000000000000001 RDI: ffff88807be218c0
RBP: 0000000000069d70 R08: 0000000000000000 R09: ffffc90006b439f0
R10: ffffc90006b439e8 R11: 0000000000000003 R12: ffff8880029ede84
R13: 0000000000004e20 R14: ffffffff84356dc0 R15: ffff888009bb3ef0
FS:  00007f62c10926c0(0000) GS:ffff88807be00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020ccb000 CR3: 000000004628c005 CR4: 0000000000f70ef0
PKRU: 55555554
Call Trace:
 <TASK>
 ? refcount_warn_saturate+0xe5/0x110
 ? __warn+0x81/0x130
 ? refcount_warn_saturate+0xe5/0x110
 ? report_bug+0x171/0x1a0
 ? refcount_warn_saturate+0xe5/0x110
 ? handle_bug+0x3c/0x80
 ? exc_invalid_op+0x17/0x70
 ? asm_exc_invalid_op+0x1a/0x20
 ? refcount_warn_saturate+0xe5/0x110
 tcp_twsk_unique+0x186/0x190
 __inet_check_established+0x176/0x2d0
 __inet_hash_connect+0x74/0x7d0
 ? __pfx___inet_check_established+0x10/0x10
 tcp_v4_connect+0x278/0x530
 __inet_stream_connect+0x10f/0x3d0
 inet_stream_connect+0x3a/0x60
 __sys_connect+0xa8/0xd0
 __x64_sys_connect+0x18/0x20
 do_syscall_64+0x83/0x170
 entry_SYSCALL_64_after_hwframe+0x78/0x80
RIP: 0033:0x7f62c11a885d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a3 45 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007f62c1091e58 EFLAGS: 00000296 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000020ccb004 RCX: 00007f62c11a885d
RDX: 0000000000000010 RSI: 0000000020ccb000 RDI: 0000000000000003
RBP: 00007f62c1091e90 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000296 R12: 00007f62c10926c0
R13: ffffffffffffff88 R14: 0000000000000000 R15: 00007ffe237885b0
 </TASK>

Fixes: ec94c2696f0b ("tcp/dccp: avoid one atomic operation for timewait hashdance")
Reported-by: Anderson Nascimento <anderson@allelesecurity.com>
Closes: https://lore.kernel.org/netdev/37a477a6-d39e-486b-9577-3463f655a6b7@allelesecurity.com/
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240501213145.62261-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_ipv4.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 0666be6b9ec93..e162bed1916ae 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -153,6 +153,12 @@ int tcp_twsk_unique(struct sock *sk, struct sock *sktw, void *twp)
 	if (tcptw->tw_ts_recent_stamp &&
 	    (!twp || (reuse && time_after32(ktime_get_seconds(),
 					    tcptw->tw_ts_recent_stamp)))) {
+		/* inet_twsk_hashdance() sets sk_refcnt after putting twsk
+		 * and releasing the bucket lock.
+		 */
+		if (unlikely(!refcount_inc_not_zero(&sktw->sk_refcnt)))
+			return 0;
+
 		/* In case of repair and re-using TIME-WAIT sockets we still
 		 * want to be sure that it is safe as above but honor the
 		 * sequence numbers and time stamps set as part of the repair
@@ -173,7 +179,7 @@ int tcp_twsk_unique(struct sock *sk, struct sock *sktw, void *twp)
 			tp->rx_opt.ts_recent	   = tcptw->tw_ts_recent;
 			tp->rx_opt.ts_recent_stamp = tcptw->tw_ts_recent_stamp;
 		}
-		sock_hold(sktw);
+
 		return 1;
 	}
 
-- 
2.43.0

[PATCH 5.15 107/168] Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit 483bc08181827fc475643272ffb69c533007e546 ]

When the sco connection is established and then, the sco socket
is releasing, timeout_work will be scheduled to judge whether
the sco disconnection is timeout. The sock will be deallocated
later, but it is dereferenced again in sco_sock_timeout. As a
result, the use-after-free bugs will happen. The root cause is
shown below:

    Cleanup Thread               |      Worker Thread
sco_sock_release                 |
  sco_sock_close                 |
    __sco_sock_close             |
      sco_sock_set_timer         |
        schedule_delayed_work    |
  sco_sock_kill                  |    (wait a time)
    sock_put(sk) //FREE          |  sco_sock_timeout
                                 |    sock_hold(sk) //USE

The KASAN report triggered by POC is shown below:

[   95.890016] ==================================================================
[   95.890496] BUG: KASAN: slab-use-after-free in sco_sock_timeout+0x5e/0x1c0
[   95.890755] Write of size 4 at addr ffff88800c388080 by task kworker/0:0/7
...
[   95.890755] Workqueue: events sco_sock_timeout
[   95.890755] Call Trace:
[   95.890755]  <TASK>
[   95.890755]  dump_stack_lvl+0x45/0x110
[   95.890755]  print_address_description+0x78/0x390
[   95.890755]  print_report+0x11b/0x250
[   95.890755]  ? __virt_addr_valid+0xbe/0xf0
[   95.890755]  ? sco_sock_timeout+0x5e/0x1c0
[   95.890755]  kasan_report+0x139/0x170
[   95.890755]  ? update_load_avg+0xe5/0x9f0
[   95.890755]  ? sco_sock_timeout+0x5e/0x1c0
[   95.890755]  kasan_check_range+0x2c3/0x2e0
[   95.890755]  sco_sock_timeout+0x5e/0x1c0
[   95.890755]  process_one_work+0x561/0xc50
[   95.890755]  worker_thread+0xab2/0x13c0
[   95.890755]  ? pr_cont_work+0x490/0x490
[   95.890755]  kthread+0x279/0x300
[   95.890755]  ? pr_cont_work+0x490/0x490
[   95.890755]  ? kthread_blkcg+0xa0/0xa0
[   95.890755]  ret_from_fork+0x34/0x60
[   95.890755]  ? kthread_blkcg+0xa0/0xa0
[   95.890755]  ret_from_fork_asm+0x11/0x20
[   95.890755]  </TASK>
[   95.890755]
[   95.890755] Allocated by task 506:
[   95.890755]  kasan_save_track+0x3f/0x70
[   95.890755]  __kasan_kmalloc+0x86/0x90
[   95.890755]  __kmalloc+0x17f/0x360
[   95.890755]  sk_prot_alloc+0xe1/0x1a0
[   95.890755]  sk_alloc+0x31/0x4e0
[   95.890755]  bt_sock_alloc+0x2b/0x2a0
[   95.890755]  sco_sock_create+0xad/0x320
[   95.890755]  bt_sock_create+0x145/0x320
[   95.890755]  __sock_create+0x2e1/0x650
[   95.890755]  __sys_socket+0xd0/0x280
[   95.890755]  __x64_sys_socket+0x75/0x80
[   95.890755]  do_syscall_64+0xc4/0x1b0
[   95.890755]  entry_SYSCALL_64_after_hwframe+0x67/0x6f
[   95.890755]
[   95.890755] Freed by task 506:
[   95.890755]  kasan_save_track+0x3f/0x70
[   95.890755]  kasan_save_free_info+0x40/0x50
[   95.890755]  poison_slab_object+0x118/0x180
[   95.890755]  __kasan_slab_free+0x12/0x30
[   95.890755]  kfree+0xb2/0x240
[   95.890755]  __sk_destruct+0x317/0x410
[   95.890755]  sco_sock_release+0x232/0x280
[   95.890755]  sock_close+0xb2/0x210
[   95.890755]  __fput+0x37f/0x770
[   95.890755]  task_work_run+0x1ae/0x210
[   95.890755]  get_signal+0xe17/0xf70
[   95.890755]  arch_do_signal_or_restart+0x3f/0x520
[   95.890755]  syscall_exit_to_user_mode+0x55/0x120
[   95.890755]  do_syscall_64+0xd1/0x1b0
[   95.890755]  entry_SYSCALL_64_after_hwframe+0x67/0x6f
[   95.890755]
[   95.890755] The buggy address belongs to the object at ffff88800c388000
[   95.890755]  which belongs to the cache kmalloc-1k of size 1024
[   95.890755] The buggy address is located 128 bytes inside of
[   95.890755]  freed 1024-byte region [ffff88800c388000, ffff88800c388400)
[   95.890755]
[   95.890755] The buggy address belongs to the physical page:
[   95.890755] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800c38a800 pfn:0xc388
[   95.890755] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[   95.890755] anon flags: 0x100000000000840(slab|head|node=0|zone=1)
[   95.890755] page_type: 0xffffffff()
[   95.890755] raw: 0100000000000840 ffff888006842dc0 0000000000000000 0000000000000001
[   95.890755] raw: ffff88800c38a800 000000000010000a 00000001ffffffff 0000000000000000
[   95.890755] head: 0100000000000840 ffff888006842dc0 0000000000000000 0000000000000001
[   95.890755] head: ffff88800c38a800 000000000010000a 00000001ffffffff 0000000000000000
[   95.890755] head: 0100000000000003 ffffea000030e201 ffffea000030e248 00000000ffffffff
[   95.890755] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000
[   95.890755] page dumped because: kasan: bad access detected
[   95.890755]
[   95.890755] Memory state around the buggy address:
[   95.890755]  ffff88800c387f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   95.890755]  ffff88800c388000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   95.890755] >ffff88800c388080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   95.890755]                    ^
[   95.890755]  ffff88800c388100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   95.890755]  ffff88800c388180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   95.890755] ==================================================================

Fix this problem by adding a check protected by sco_conn_lock to judget
whether the conn->hcon is null. Because the conn->hcon will be set to null,
when the sock is releasing.

Fixes: ba316be1b6a0 ("Bluetooth: schedule SCO timeouts with delayed_work")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/sco.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 57c6a4f845a32..431e09cac1787 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -83,6 +83,10 @@ static void sco_sock_timeout(struct work_struct *work)
 	struct sock *sk;
 
 	sco_conn_lock(conn);
+	if (!conn->hcon) {
+		sco_conn_unlock(conn);
+		return;
+	}
 	sk = conn->sk;
 	if (sk)
 		sock_hold(sk);
-- 
2.43.0

[PATCH 5.15 108/168] Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit adf0398cee86643b8eacde95f17d073d022f782c ]

There is a race condition between l2cap_chan_timeout() and
l2cap_chan_del(). When we use l2cap_chan_del() to delete the
channel, the chan->conn will be set to null. But the conn could
be dereferenced again in the mutex_lock() of l2cap_chan_timeout().
As a result the null pointer dereference bug will happen. The
KASAN report triggered by POC is shown below:

[  472.074580] ==================================================================
[  472.075284] BUG: KASAN: null-ptr-deref in mutex_lock+0x68/0xc0
[  472.075308] Write of size 8 at addr 0000000000000158 by task kworker/0:0/7
[  472.075308]
[  472.075308] CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.9.0-rc5-00356-g78c0094a146b #36
[  472.075308] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4
[  472.075308] Workqueue: events l2cap_chan_timeout
[  472.075308] Call Trace:
[  472.075308]  <TASK>
[  472.075308]  dump_stack_lvl+0x137/0x1a0
[  472.075308]  print_report+0x101/0x250
[  472.075308]  ? __virt_addr_valid+0x77/0x160
[  472.075308]  ? mutex_lock+0x68/0xc0
[  472.075308]  kasan_report+0x139/0x170
[  472.075308]  ? mutex_lock+0x68/0xc0
[  472.075308]  kasan_check_range+0x2c3/0x2e0
[  472.075308]  mutex_lock+0x68/0xc0
[  472.075308]  l2cap_chan_timeout+0x181/0x300
[  472.075308]  process_one_work+0x5d2/0xe00
[  472.075308]  worker_thread+0xe1d/0x1660
[  472.075308]  ? pr_cont_work+0x5e0/0x5e0
[  472.075308]  kthread+0x2b7/0x350
[  472.075308]  ? pr_cont_work+0x5e0/0x5e0
[  472.075308]  ? kthread_blkcg+0xd0/0xd0
[  472.075308]  ret_from_fork+0x4d/0x80
[  472.075308]  ? kthread_blkcg+0xd0/0xd0
[  472.075308]  ret_from_fork_asm+0x11/0x20
[  472.075308]  </TASK>
[  472.075308] ==================================================================
[  472.094860] Disabling lock debugging due to kernel taint
[  472.096136] BUG: kernel NULL pointer dereference, address: 0000000000000158
[  472.096136] #PF: supervisor write access in kernel mode
[  472.096136] #PF: error_code(0x0002) - not-present page
[  472.096136] PGD 0 P4D 0
[  472.096136] Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI
[  472.096136] CPU: 0 PID: 7 Comm: kworker/0:0 Tainted: G    B              6.9.0-rc5-00356-g78c0094a146b #36
[  472.096136] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4
[  472.096136] Workqueue: events l2cap_chan_timeout
[  472.096136] RIP: 0010:mutex_lock+0x88/0xc0
[  472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88
[  472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246
[  472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865
[  472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78
[  472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f
[  472.096136] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000
[  472.096136] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00
[  472.096136] FS:  0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000
[  472.096136] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  472.096136] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0
[  472.096136] Call Trace:
[  472.096136]  <TASK>
[  472.096136]  ? __die_body+0x8d/0xe0
[  472.096136]  ? page_fault_oops+0x6b8/0x9a0
[  472.096136]  ? kernelmode_fixup_or_oops+0x20c/0x2a0
[  472.096136]  ? do_user_addr_fault+0x1027/0x1340
[  472.096136]  ? _printk+0x7a/0xa0
[  472.096136]  ? mutex_lock+0x68/0xc0
[  472.096136]  ? add_taint+0x42/0xd0
[  472.096136]  ? exc_page_fault+0x6a/0x1b0
[  472.096136]  ? asm_exc_page_fault+0x26/0x30
[  472.096136]  ? mutex_lock+0x75/0xc0
[  472.096136]  ? mutex_lock+0x88/0xc0
[  472.096136]  ? mutex_lock+0x75/0xc0
[  472.096136]  l2cap_chan_timeout+0x181/0x300
[  472.096136]  process_one_work+0x5d2/0xe00
[  472.096136]  worker_thread+0xe1d/0x1660
[  472.096136]  ? pr_cont_work+0x5e0/0x5e0
[  472.096136]  kthread+0x2b7/0x350
[  472.096136]  ? pr_cont_work+0x5e0/0x5e0
[  472.096136]  ? kthread_blkcg+0xd0/0xd0
[  472.096136]  ret_from_fork+0x4d/0x80
[  472.096136]  ? kthread_blkcg+0xd0/0xd0
[  472.096136]  ret_from_fork_asm+0x11/0x20
[  472.096136]  </TASK>
[  472.096136] Modules linked in:
[  472.096136] CR2: 0000000000000158
[  472.096136] ---[ end trace 0000000000000000 ]---
[  472.096136] RIP: 0010:mutex_lock+0x88/0xc0
[  472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88
[  472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246
[  472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865
[  472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78
[  472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f
[  472.132932] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000
[  472.132932] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00
[  472.132932] FS:  0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000
[  472.132932] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  472.132932] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0
[  472.132932] Kernel panic - not syncing: Fatal exception
[  472.132932] Kernel Offset: disabled
[  472.132932] ---[ end Kernel panic - not syncing: Fatal exception ]---

Add a check to judge whether the conn is null in l2cap_chan_timeout()
in order to mitigate the bug.

Fixes: 3df91ea20e74 ("Bluetooth: Revert to mutexes from RCU list")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 11bfc8737e6ce..900b352975856 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -435,6 +435,9 @@ static void l2cap_chan_timeout(struct work_struct *work)
 
 	BT_DBG("chan %p state %s", chan, state_to_string(chan->state));
 
+	if (!conn)
+		return;
+
 	mutex_lock(&conn->chan_lock);
 	/* __set_chan_timer() calls l2cap_chan_hold(chan) while scheduling
 	 * this work. No need to call l2cap_chan_hold(chan) here again.
-- 
2.43.0

[PATCH 5.15 109/168] rtnetlink: Correct nested IFLA_VF_VLAN_LIST attribute validation

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roded Zats <rzats@paloaltonetworks.com>

[ Upstream commit 1aec77b2bb2ed1db0f5efc61c4c1ca3813307489 ]

Each attribute inside a nested IFLA_VF_VLAN_LIST is assumed to be a
struct ifla_vf_vlan_info so the size of such attribute needs to be at least
of sizeof(struct ifla_vf_vlan_info) which is 14 bytes.
The current size validation in do_setvfinfo is against NLA_HDRLEN (4 bytes)
which is less than sizeof(struct ifla_vf_vlan_info) so this validation
is not enough and a too small attribute might be cast to a
struct ifla_vf_vlan_info, this might result in an out of bands
read access when accessing the saved (casted) entry in ivvl.

Fixes: 79aab093a0b5 ("net: Update API for VF vlan protocol 802.1ad support")
Signed-off-by: Roded Zats <rzats@paloaltonetworks.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240502155751.75705-1-rzats@paloaltonetworks.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/rtnetlink.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index ef218e290dfba..d25632fbfa892 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -2383,7 +2383,7 @@ static int do_setvfinfo(struct net_device *dev, struct nlattr **tb)
 
 		nla_for_each_nested(attr, tb[IFLA_VF_VLAN_LIST], rem) {
 			if (nla_type(attr) != IFLA_VF_VLAN_INFO ||
-			    nla_len(attr) < NLA_HDRLEN) {
+			    nla_len(attr) < sizeof(struct ifla_vf_vlan_info)) {
 				return -EINVAL;
 			}
 			if (len >= MAX_VLAN_LIST_LEN)
-- 
2.43.0

[PATCH 5.15 110/168] hwmon: (corsair-cpro) Use a separate buffer for sending commands

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aleksa Savic <savicaleksa83@gmail.com>

[ Upstream commit e0cd85dc666cb08e1bd313d560cb4eff4d04219e ]

Introduce cmd_buffer, a separate buffer for storing only
the command that is sent to the device. Before this separation,
the existing buffer was shared for both the command and the
report received in ccp_raw_event(), which was copied into it.

However, because of hidraw, the raw event parsing may be triggered
in the middle of sending a command, resulting in outputting gibberish
to the device. Using a separate buffer resolves this.

Fixes: 40c3a4454225 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-2-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/corsair-cpro.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/hwmon/corsair-cpro.c b/drivers/hwmon/corsair-cpro.c
index fa6aa4fc8b521..0a9cbb556188f 100644
--- a/drivers/hwmon/corsair-cpro.c
+++ b/drivers/hwmon/corsair-cpro.c
@@ -79,6 +79,7 @@ struct ccp_device {
 	struct device *hwmon_dev;
 	struct completion wait_input_report;
 	struct mutex mutex; /* whenever buffer is used, lock before send_usb_cmd */
+	u8 *cmd_buffer;
 	u8 *buffer;
 	int target[6];
 	DECLARE_BITMAP(temp_cnct, NUM_TEMP_SENSORS);
@@ -111,15 +112,15 @@ static int send_usb_cmd(struct ccp_device *ccp, u8 command, u8 byte1, u8 byte2,
 	unsigned long t;
 	int ret;
 
-	memset(ccp->buffer, 0x00, OUT_BUFFER_SIZE);
-	ccp->buffer[0] = command;
-	ccp->buffer[1] = byte1;
-	ccp->buffer[2] = byte2;
-	ccp->buffer[3] = byte3;
+	memset(ccp->cmd_buffer, 0x00, OUT_BUFFER_SIZE);
+	ccp->cmd_buffer[0] = command;
+	ccp->cmd_buffer[1] = byte1;
+	ccp->cmd_buffer[2] = byte2;
+	ccp->cmd_buffer[3] = byte3;
 
 	reinit_completion(&ccp->wait_input_report);
 
-	ret = hid_hw_output_report(ccp->hdev, ccp->buffer, OUT_BUFFER_SIZE);
+	ret = hid_hw_output_report(ccp->hdev, ccp->cmd_buffer, OUT_BUFFER_SIZE);
 	if (ret < 0)
 		return ret;
 
@@ -492,7 +493,11 @@ static int ccp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	if (!ccp)
 		return -ENOMEM;
 
-	ccp->buffer = devm_kmalloc(&hdev->dev, OUT_BUFFER_SIZE, GFP_KERNEL);
+	ccp->cmd_buffer = devm_kmalloc(&hdev->dev, OUT_BUFFER_SIZE, GFP_KERNEL);
+	if (!ccp->cmd_buffer)
+		return -ENOMEM;
+
+	ccp->buffer = devm_kmalloc(&hdev->dev, IN_BUFFER_SIZE, GFP_KERNEL);
 	if (!ccp->buffer)
 		return -ENOMEM;
 
-- 
2.43.0

[PATCH 5.15 111/168] hwmon: (corsair-cpro) Use complete_all() instead of complete() in ccp_raw_event()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aleksa Savic <savicaleksa83@gmail.com>

[ Upstream commit 3a034a7b0715eb51124a5263890b1ed39978ed3a ]

In ccp_raw_event(), the ccp->wait_input_report completion is
completed once. Since we're waiting for exactly one report in
send_usb_cmd(), use complete_all() instead of complete()
to mark the completion as spent.

Fixes: 40c3a4454225 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-3-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/corsair-cpro.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/corsair-cpro.c b/drivers/hwmon/corsair-cpro.c
index 0a9cbb556188f..543a741fe5473 100644
--- a/drivers/hwmon/corsair-cpro.c
+++ b/drivers/hwmon/corsair-cpro.c
@@ -140,7 +140,7 @@ static int ccp_raw_event(struct hid_device *hdev, struct hid_report *report, u8
 		return 0;
 
 	memcpy(ccp->buffer, data, min(IN_BUFFER_SIZE, size));
-	complete(&ccp->wait_input_report);
+	complete_all(&ccp->wait_input_report);
 
 	return 0;
 }
-- 
2.43.0

[PATCH 5.15 112/168] hwmon: (corsair-cpro) Protect ccp->wait_input_report with a spinlock

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aleksa Savic <savicaleksa83@gmail.com>

[ Upstream commit d02abd57e79469a026213f7f5827a98d909f236a ]

Through hidraw, userspace can cause a status report to be sent
from the device. The parsing in ccp_raw_event() may happen in
parallel to a send_usb_cmd() call (which resets the completion
for tracking the report) if it's running on a different CPU where
bottom half interrupts are not disabled.

Add a spinlock around the complete_all() in ccp_raw_event() and
reinit_completion() in send_usb_cmd() to prevent race issues.

Fixes: 40c3a4454225 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-4-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/corsair-cpro.c | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/drivers/hwmon/corsair-cpro.c b/drivers/hwmon/corsair-cpro.c
index 543a741fe5473..486fb6a8c3566 100644
--- a/drivers/hwmon/corsair-cpro.c
+++ b/drivers/hwmon/corsair-cpro.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
+#include <linux/spinlock.h>
 #include <linux/types.h>
 
 #define USB_VENDOR_ID_CORSAIR			0x1b1c
@@ -77,6 +78,8 @@
 struct ccp_device {
 	struct hid_device *hdev;
 	struct device *hwmon_dev;
+	/* For reinitializing the completion below */
+	spinlock_t wait_input_report_lock;
 	struct completion wait_input_report;
 	struct mutex mutex; /* whenever buffer is used, lock before send_usb_cmd */
 	u8 *cmd_buffer;
@@ -118,7 +121,15 @@ static int send_usb_cmd(struct ccp_device *ccp, u8 command, u8 byte1, u8 byte2,
 	ccp->cmd_buffer[2] = byte2;
 	ccp->cmd_buffer[3] = byte3;
 
+	/*
+	 * Disable raw event parsing for a moment to safely reinitialize the
+	 * completion. Reinit is done because hidraw could have triggered
+	 * the raw event parsing and marked the ccp->wait_input_report
+	 * completion as done.
+	 */
+	spin_lock_bh(&ccp->wait_input_report_lock);
 	reinit_completion(&ccp->wait_input_report);
+	spin_unlock_bh(&ccp->wait_input_report_lock);
 
 	ret = hid_hw_output_report(ccp->hdev, ccp->cmd_buffer, OUT_BUFFER_SIZE);
 	if (ret < 0)
@@ -136,11 +147,12 @@ static int ccp_raw_event(struct hid_device *hdev, struct hid_report *report, u8
 	struct ccp_device *ccp = hid_get_drvdata(hdev);
 
 	/* only copy buffer when requested */
-	if (completion_done(&ccp->wait_input_report))
-		return 0;
-
-	memcpy(ccp->buffer, data, min(IN_BUFFER_SIZE, size));
-	complete_all(&ccp->wait_input_report);
+	spin_lock(&ccp->wait_input_report_lock);
+	if (!completion_done(&ccp->wait_input_report)) {
+		memcpy(ccp->buffer, data, min(IN_BUFFER_SIZE, size));
+		complete_all(&ccp->wait_input_report);
+	}
+	spin_unlock(&ccp->wait_input_report_lock);
 
 	return 0;
 }
@@ -515,7 +527,9 @@ static int ccp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 
 	ccp->hdev = hdev;
 	hid_set_drvdata(hdev, ccp);
+
 	mutex_init(&ccp->mutex);
+	spin_lock_init(&ccp->wait_input_report_lock);
 	init_completion(&ccp->wait_input_report);
 
 	hid_device_io_start(hdev);
-- 
2.43.0

[PATCH 5.15 113/168] phonet: fix rtm_phonet_notify() skb allocation

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit d8cac8568618dcb8a51af3db1103e8d4cc4aeea7 ]

fill_route() stores three components in the skb:

- struct rtmsg
- RTA_DST (u8)
- RTA_OIF (u32)

Therefore, rtm_phonet_notify() should use

NLMSG_ALIGN(sizeof(struct rtmsg)) +
nla_total_size(1) +
nla_total_size(4)

Fixes: f062f41d0657 ("Phonet: routing table Netlink interface")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Rémi Denis-Courmont <courmisch@gmail.com>
Link: https://lore.kernel.org/r/20240502161700.1804476-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/phonet/pn_netlink.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/phonet/pn_netlink.c b/net/phonet/pn_netlink.c
index 59aebe2968907..dd4c7e9a634fb 100644
--- a/net/phonet/pn_netlink.c
+++ b/net/phonet/pn_netlink.c
@@ -193,7 +193,7 @@ void rtm_phonet_notify(int event, struct net_device *dev, u8 dst)
 	struct sk_buff *skb;
 	int err = -ENOBUFS;
 
-	skb = nlmsg_new(NLMSG_ALIGN(sizeof(struct ifaddrmsg)) +
+	skb = nlmsg_new(NLMSG_ALIGN(sizeof(struct rtmsg)) +
 			nla_total_size(1) + nla_total_size(4), GFP_KERNEL);
 	if (skb == NULL)
 		goto errout;
-- 
2.43.0

[PATCH 5.15 114/168] net: bridge: fix corrupted ethernet header on multicast-to-unicast

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 86b29d830ad69eecff25b22dc96c14c6573718e6 ]

The change from skb_copy to pskb_copy unfortunately changed the data
copying to omit the ethernet header, since it was pulled before reaching
this point. Fix this by calling __skb_push/pull around pskb_copy.

Fixes: 59c878cbcdd8 ("net: bridge: fix multicast-to-unicast with fraglist GSO")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bridge/br_forward.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c
index 0bdd2892646db..1b66c276118a3 100644
--- a/net/bridge/br_forward.c
+++ b/net/bridge/br_forward.c
@@ -253,6 +253,7 @@ static void maybe_deliver_addr(struct net_bridge_port *p, struct sk_buff *skb,
 {
 	struct net_device *dev = BR_INPUT_SKB_CB(skb)->brdev;
 	const unsigned char *src = eth_hdr(skb)->h_source;
+	struct sk_buff *nskb;
 
 	if (!should_deliver(p, skb))
 		return;
@@ -261,12 +262,16 @@ static void maybe_deliver_addr(struct net_bridge_port *p, struct sk_buff *skb,
 	if (skb->dev == p->dev && ether_addr_equal(src, addr))
 		return;
 
-	skb = pskb_copy(skb, GFP_ATOMIC);
-	if (!skb) {
+	__skb_push(skb, ETH_HLEN);
+	nskb = pskb_copy(skb, GFP_ATOMIC);
+	__skb_pull(skb, ETH_HLEN);
+	if (!nskb) {
 		DEV_STATS_INC(dev, tx_dropped);
 		return;
 	}
 
+	skb = nskb;
+	__skb_pull(skb, ETH_HLEN);
 	if (!is_broadcast_ether_addr(addr))
 		memcpy(eth_hdr(skb)->h_dest, addr, ETH_ALEN);
 
-- 
2.43.0

[PATCH 5.15 115/168] ipv6: fib6_rules: avoid possible NULL dereference in fib6_rule_action()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit d101291b2681e5ab938554e3e323f7a7ee33e3aa ]

syzbot is able to trigger the following crash [1],
caused by unsafe ip6_dst_idev() use.

Indeed ip6_dst_idev() can return NULL, and must always be checked.

[1]

Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 31648 Comm: syz-executor.0 Not tainted 6.9.0-rc4-next-20240417-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
 RIP: 0010:__fib6_rule_action net/ipv6/fib6_rules.c:237 [inline]
 RIP: 0010:fib6_rule_action+0x241/0x7b0 net/ipv6/fib6_rules.c:267
Code: 02 00 00 49 8d 9f d8 00 00 00 48 89 d8 48 c1 e8 03 42 80 3c 20 00 74 08 48 89 df e8 f9 32 bf f7 48 8b 1b 48 89 d8 48 c1 e8 03 <42> 80 3c 20 00 74 08 48 89 df e8 e0 32 bf f7 4c 8b 03 48 89 ef 4c
RSP: 0018:ffffc9000fc1f2f0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 1a772f98c8186700
RDX: 0000000000000003 RSI: ffffffff8bcac4e0 RDI: ffffffff8c1f9760
RBP: ffff8880673fb980 R08: ffffffff8fac15ef R09: 1ffffffff1f582bd
R10: dffffc0000000000 R11: fffffbfff1f582be R12: dffffc0000000000
R13: 0000000000000080 R14: ffff888076509000 R15: ffff88807a029a00
FS:  00007f55e82ca6c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b31d23000 CR3: 0000000022b66000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
  fib_rules_lookup+0x62c/0xdb0 net/core/fib_rules.c:317
  fib6_rule_lookup+0x1fd/0x790 net/ipv6/fib6_rules.c:108
  ip6_route_output_flags_noref net/ipv6/route.c:2637 [inline]
  ip6_route_output_flags+0x38e/0x610 net/ipv6/route.c:2649
  ip6_route_output include/net/ip6_route.h:93 [inline]
  ip6_dst_lookup_tail+0x189/0x11a0 net/ipv6/ip6_output.c:1120
  ip6_dst_lookup_flow+0xb9/0x180 net/ipv6/ip6_output.c:1250
  sctp_v6_get_dst+0x792/0x1e20 net/sctp/ipv6.c:326
  sctp_transport_route+0x12c/0x2e0 net/sctp/transport.c:455
  sctp_assoc_add_peer+0x614/0x15c0 net/sctp/associola.c:662
  sctp_connect_new_asoc+0x31d/0x6c0 net/sctp/socket.c:1099
  __sctp_connect+0x66d/0xe30 net/sctp/socket.c:1197
  sctp_connect net/sctp/socket.c:4819 [inline]
  sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834
  __sys_connect_file net/socket.c:2048 [inline]
  __sys_connect+0x2df/0x310 net/socket.c:2065
  __do_sys_connect net/socket.c:2075 [inline]
  __se_sys_connect net/socket.c:2072 [inline]
  __x64_sys_connect+0x7a/0x90 net/socket.c:2072
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Fixes: 5e5f3f0f8013 ("[IPV6] ADDRCONF: Convert ipv6_get_saddr() to ipv6_dev_get_saddr().")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240507163145.835254-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/fib6_rules.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/fib6_rules.c b/net/ipv6/fib6_rules.c
index 8e9e80eb0f329..a4caaead74c1d 100644
--- a/net/ipv6/fib6_rules.c
+++ b/net/ipv6/fib6_rules.c
@@ -232,8 +232,12 @@ static int __fib6_rule_action(struct fib_rule *rule, struct flowi *flp,
 	rt = pol_lookup_func(lookup,
 			     net, table, flp6, arg->lookup_data, flags);
 	if (rt != net->ipv6.ip6_null_entry) {
+		struct inet6_dev *idev = ip6_dst_idev(&rt->dst);
+
+		if (!idev)
+			goto again;
 		err = fib6_rule_saddr(net, rule, flags, flp6,
-				      ip6_dst_idev(&rt->dst)->dev);
+				      idev->dev);
 
 		if (err == -EAGAIN)
 			goto again;
-- 
2.43.0

[PATCH 5.15 116/168] net: hns3: PF support get unicast MAC address space assigned by firmware

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guangbin Huang <huangguangbin2@huawei.com>

[ Upstream commit e435a6b5315a05a4e4e9f77679a57fd0d679e384 ]

Currently, there are two ways for PF to set the unicast MAC address space
size: specified by config parameters in firmware or set to default value.

That's mean if the config parameters in firmware is zero, driver will
divide the whole unicast MAC address space equally to 8 PFs. However, in
this case, the unicast MAC address space will be wasted a lot when the
hardware actually has less then 8 PFs. And in the other hand, if one PF has
much more VFs than other PFs, then each function of this PF will has much
less address space than other PFs.

In order to ameliorate the above two situations, introduce the third way
of unicast MAC address space assignment: firmware divides the whole unicast
MAC address space equally to functions of all PFs, and calculates the space
size of each PF according to its function number. PF queries the space size
by the querying device specification command when in initialization
process.

The third way assignment is lower priority than specified by config
parameters, only if the config parameters is zero can be used, and if
firmware does not support the third way assignment, then driver still
divides the whole unicast MAC address space equally to 8 PFs.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 05eb60e9648c ("net: hns3: using user configure after hardware reset")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hnae3.h           |  1 +
 drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c    |  2 ++
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h    |  4 +++-
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c   | 11 ++++++++---
 4 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index b51afb83d023e..8dfa372df8e77 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -341,6 +341,7 @@ struct hnae3_dev_specs {
 	u8 max_non_tso_bd_num; /* max BD number of one non-TSO packet */
 	u16 max_frm_size;
 	u16 max_qset_num;
+	u16 umv_size;
 };
 
 struct hnae3_client_ops {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
index 45f245b1d331c..bd801e35d51ea 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
@@ -924,6 +924,8 @@ hns3_dbg_dev_specs(struct hnae3_handle *h, char *buf, int len, int *pos)
 			  dev_specs->max_tm_rate);
 	*pos += scnprintf(buf + *pos, len - *pos, "MAX QSET number: %u\n",
 			  dev_specs->max_qset_num);
+	*pos += scnprintf(buf + *pos, len - *pos, "umv size: %u\n",
+			  dev_specs->umv_size);
 }
 
 static int hns3_dbg_dev_info(struct hnae3_handle *h, char *buf, int len)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
index 33244472e0d0e..cfbb7c51b0cb3 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
@@ -1188,7 +1188,9 @@ struct hclge_dev_specs_1_cmd {
 	__le16 max_frm_size;
 	__le16 max_qset_num;
 	__le16 max_int_gl;
-	u8 rsv1[18];
+	u8 rsv0[2];
+	__le16 umv_size;
+	u8 rsv1[14];
 };
 
 /* mac speed type defined in firmware command */
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 598da1be22ebe..3423b8e278e3a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -1343,8 +1343,6 @@ static void hclge_parse_cfg(struct hclge_cfg *cfg, struct hclge_desc *desc)
 	cfg->umv_space = hnae3_get_field(__le32_to_cpu(req->param[1]),
 					 HCLGE_CFG_UMV_TBL_SPACE_M,
 					 HCLGE_CFG_UMV_TBL_SPACE_S);
-	if (!cfg->umv_space)
-		cfg->umv_space = HCLGE_DEFAULT_UMV_SPACE_PER_PF;
 
 	cfg->pf_rss_size_max = hnae3_get_field(__le32_to_cpu(req->param[2]),
 					       HCLGE_CFG_PF_RSS_SIZE_M,
@@ -1420,6 +1418,7 @@ static void hclge_set_default_dev_specs(struct hclge_dev *hdev)
 	ae_dev->dev_specs.max_int_gl = HCLGE_DEF_MAX_INT_GL;
 	ae_dev->dev_specs.max_frm_size = HCLGE_MAC_MAX_FRAME;
 	ae_dev->dev_specs.max_qset_num = HCLGE_MAX_QSET_NUM;
+	ae_dev->dev_specs.umv_size = HCLGE_DEFAULT_UMV_SPACE_PER_PF;
 }
 
 static void hclge_parse_dev_specs(struct hclge_dev *hdev,
@@ -1441,6 +1440,7 @@ static void hclge_parse_dev_specs(struct hclge_dev *hdev,
 	ae_dev->dev_specs.max_qset_num = le16_to_cpu(req1->max_qset_num);
 	ae_dev->dev_specs.max_int_gl = le16_to_cpu(req1->max_int_gl);
 	ae_dev->dev_specs.max_frm_size = le16_to_cpu(req1->max_frm_size);
+	ae_dev->dev_specs.umv_size = le16_to_cpu(req1->umv_size);
 }
 
 static void hclge_check_dev_specs(struct hclge_dev *hdev)
@@ -1461,6 +1461,8 @@ static void hclge_check_dev_specs(struct hclge_dev *hdev)
 		dev_specs->max_int_gl = HCLGE_DEF_MAX_INT_GL;
 	if (!dev_specs->max_frm_size)
 		dev_specs->max_frm_size = HCLGE_MAC_MAX_FRAME;
+	if (!dev_specs->umv_size)
+		dev_specs->umv_size = HCLGE_DEFAULT_UMV_SPACE_PER_PF;
 }
 
 static int hclge_query_dev_specs(struct hclge_dev *hdev)
@@ -1550,7 +1552,10 @@ static int hclge_configure(struct hclge_dev *hdev)
 	hdev->tm_info.num_pg = 1;
 	hdev->tc_max = cfg.tc_num;
 	hdev->tm_info.hw_pfc_map = 0;
-	hdev->wanted_umv_size = cfg.umv_space;
+	if (cfg.umv_space)
+		hdev->wanted_umv_size = cfg.umv_space;
+	else
+		hdev->wanted_umv_size = hdev->ae_dev->dev_specs.umv_size;
 	hdev->tx_spare_buf_size = cfg.tx_spare_buf_size;
 	hdev->gro_en = true;
 	if (cfg.vlan_fliter_cap == HCLGE_VLAN_FLTR_CAN_MDF)
-- 
2.43.0

[PATCH 5.15 117/168] net: hns3: using user configure after hardware reset

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peiyang Wang <wangpeiyang1@huawei.com>

[ Upstream commit 05eb60e9648cca0beeebdbcd263b599fb58aee48 ]

When a reset occurring, it's supposed to recover user's configuration.
Currently, the port info(speed, duplex and autoneg) is stored in hclge_mac
and will be scheduled updated. Consider the case that reset was happened
consecutively. During the first reset, the port info is configured with
a temporary value cause the PHY is reset and looking for best link config.
Second reset start and use pervious configuration which is not the user's.
The specific process is as follows:

+------+               +----+                +----+
| USER |               | PF |                | HW |
+---+--+               +-+--+                +-+--+
    |  ethtool --reset   |                     |
    +------------------->|    reset command    |
    |  ethtool --reset   +-------------------->|
    +------------------->|                     +---+
    |                    +---+                 |   |
    |                    |   |reset currently  |   | HW RESET
    |                    |   |and wait to do   |   |
    |                    |<--+                 |   |
    |                    | send pervious cfg   |<--+
    |                    | (1000M FULL AN_ON)  |
    |                    +-------------------->|
    |                    | read cfg(time task) |
    |                    | (10M HALF AN_OFF)   +---+
    |                    |<--------------------+   | cfg take effect
    |                    |    reset command    |<--+
    |                    +-------------------->|
    |                    |                     +---+
    |                    | send pervious cfg   |   | HW RESET
    |                    | (10M HALF AN_OFF)   |<--+
    |                    +-------------------->|
    |                    | read cfg(time task) |
    |                    |  (10M HALF AN_OFF)  +---+
    |                    |<--------------------+   | cfg take effect
    |                    |                     |   |
    |                    | read cfg(time task) |<--+
    |                    |  (10M HALF AN_OFF)  |
    |                    |<--------------------+
    |                    |                     |
    v                    v                     v

To avoid aboved situation, this patch introduced req_speed, req_duplex,
req_autoneg to store user's configuration and it only be used after
hardware reset and to recover user's configuration

Fixes: f5f2b3e4dcc0 ("net: hns3: add support for imp-controlled PHYs")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c   | 15 +++++++++------
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h   |  3 +++
 2 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 3423b8e278e3a..71b498aa327bb 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -1572,6 +1572,9 @@ static int hclge_configure(struct hclge_dev *hdev)
 			cfg.default_speed, ret);
 		return ret;
 	}
+	hdev->hw.mac.req_speed = hdev->hw.mac.speed;
+	hdev->hw.mac.req_autoneg = AUTONEG_ENABLE;
+	hdev->hw.mac.req_duplex = DUPLEX_FULL;
 
 	hclge_parse_link_mode(hdev, cfg.speed_ability);
 
@@ -3163,9 +3166,9 @@ hclge_set_phy_link_ksettings(struct hnae3_handle *handle,
 		return ret;
 	}
 
-	hdev->hw.mac.autoneg = cmd->base.autoneg;
-	hdev->hw.mac.speed = cmd->base.speed;
-	hdev->hw.mac.duplex = cmd->base.duplex;
+	hdev->hw.mac.req_autoneg = cmd->base.autoneg;
+	hdev->hw.mac.req_speed = cmd->base.speed;
+	hdev->hw.mac.req_duplex = cmd->base.duplex;
 	linkmode_copy(hdev->hw.mac.advertising, cmd->link_modes.advertising);
 
 	return 0;
@@ -3198,9 +3201,9 @@ static int hclge_tp_port_init(struct hclge_dev *hdev)
 	if (!hnae3_dev_phy_imp_supported(hdev))
 		return 0;
 
-	cmd.base.autoneg = hdev->hw.mac.autoneg;
-	cmd.base.speed = hdev->hw.mac.speed;
-	cmd.base.duplex = hdev->hw.mac.duplex;
+	cmd.base.autoneg = hdev->hw.mac.req_autoneg;
+	cmd.base.speed = hdev->hw.mac.req_speed;
+	cmd.base.duplex = hdev->hw.mac.req_duplex;
 	linkmode_copy(cmd.link_modes.advertising, hdev->hw.mac.advertising);
 
 	return hclge_set_phy_link_ksettings(&hdev->vport->nic, &cmd);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index a716027df0ed1..ba0d41091b1da 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -275,10 +275,13 @@ struct hclge_mac {
 	u8 media_type;	/* port media type, e.g. fibre/copper/backplane */
 	u8 mac_addr[ETH_ALEN];
 	u8 autoneg;
+	u8 req_autoneg;
 	u8 duplex;
+	u8 req_duplex;
 	u8 support_autoneg;
 	u8 speed_type;	/* 0: sfp speed, 1: active speed */
 	u32 speed;
+	u32 req_speed;
 	u32 max_speed;
 	u32 speed_ability; /* speed ability supported by current media */
 	u32 module_type; /* sub media type, e.g. kr/cr/sr/lr */
-- 
2.43.0

[PATCH 5.15 118/168] net: hns3: add log for workqueue scheduled late

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yufeng Mo <moyufeng@huawei.com>

[ Upstream commit d9069dab207534d9f6f41993ee78a651733becea ]

When the mbx or reset message arrives, the driver is informed
through an interrupt. This task can be processed only after
the workqueue is scheduled. In some cases, this workqueue
scheduling takes a long time. As a result, the mbx or reset
service task cannot be processed in time. So add some warning
message to improve debugging efficiency for this case.

Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 669554c512d2 ("net: hns3: direct return when receive a unknown mailbox message")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/hisilicon/hns3/hclge_mbx.h   |  3 +++
 .../hisilicon/hns3/hns3pf/hclge_main.c        | 22 +++++++++++++++++--
 .../hisilicon/hns3/hns3pf/hclge_main.h        |  2 ++
 .../hisilicon/hns3/hns3pf/hclge_mbx.c         |  8 +++++++
 4 files changed, 33 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
index 277d6d657c429..e1ba0ae055b02 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
@@ -80,6 +80,9 @@ enum hclge_mbx_tbl_cfg_subcode {
 #define HCLGE_MBX_MAX_RESP_DATA_SIZE	8U
 #define HCLGE_MBX_MAX_RING_CHAIN_PARAM_NUM	4
 
+#define HCLGE_RESET_SCHED_TIMEOUT	(3 * HZ)
+#define HCLGE_MBX_SCHED_TIMEOUT	(HZ / 2)
+
 struct hclge_ring_chain_param {
 	u8 ring_type;
 	u8 tqp_index;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 71b498aa327bb..93e55c6c4cf5e 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2855,16 +2855,20 @@ static int hclge_mac_init(struct hclge_dev *hdev)
 static void hclge_mbx_task_schedule(struct hclge_dev *hdev)
 {
 	if (!test_bit(HCLGE_STATE_REMOVING, &hdev->state) &&
-	    !test_and_set_bit(HCLGE_STATE_MBX_SERVICE_SCHED, &hdev->state))
+	    !test_and_set_bit(HCLGE_STATE_MBX_SERVICE_SCHED, &hdev->state)) {
+		hdev->last_mbx_scheduled = jiffies;
 		mod_delayed_work(hclge_wq, &hdev->service_task, 0);
+	}
 }
 
 static void hclge_reset_task_schedule(struct hclge_dev *hdev)
 {
 	if (!test_bit(HCLGE_STATE_REMOVING, &hdev->state) &&
 	    test_bit(HCLGE_STATE_SERVICE_INITED, &hdev->state) &&
-	    !test_and_set_bit(HCLGE_STATE_RST_SERVICE_SCHED, &hdev->state))
+	    !test_and_set_bit(HCLGE_STATE_RST_SERVICE_SCHED, &hdev->state)) {
+		hdev->last_rst_scheduled = jiffies;
 		mod_delayed_work(hclge_wq, &hdev->service_task, 0);
+	}
 }
 
 static void hclge_errhand_task_schedule(struct hclge_dev *hdev)
@@ -3697,6 +3701,13 @@ static void hclge_mailbox_service_task(struct hclge_dev *hdev)
 	    test_and_set_bit(HCLGE_STATE_MBX_HANDLING, &hdev->state))
 		return;
 
+	if (time_is_before_jiffies(hdev->last_mbx_scheduled +
+				   HCLGE_MBX_SCHED_TIMEOUT))
+		dev_warn(&hdev->pdev->dev,
+			 "mbx service task is scheduled after %ums on cpu%u!\n",
+			 jiffies_to_msecs(jiffies - hdev->last_mbx_scheduled),
+			 smp_processor_id());
+
 	hclge_mbx_handler(hdev);
 
 	clear_bit(HCLGE_STATE_MBX_HANDLING, &hdev->state);
@@ -4346,6 +4357,13 @@ static void hclge_reset_service_task(struct hclge_dev *hdev)
 	if (!test_and_clear_bit(HCLGE_STATE_RST_SERVICE_SCHED, &hdev->state))
 		return;
 
+	if (time_is_before_jiffies(hdev->last_rst_scheduled +
+				   HCLGE_RESET_SCHED_TIMEOUT))
+		dev_warn(&hdev->pdev->dev,
+			 "reset service task is scheduled after %ums on cpu%u!\n",
+			 jiffies_to_msecs(jiffies - hdev->last_rst_scheduled),
+			 smp_processor_id());
+
 	down(&hdev->reset_sem);
 	set_bit(HCLGE_STATE_RST_HANDLING, &hdev->state);
 
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index ba0d41091b1da..6870ccc9d9eac 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -928,6 +928,8 @@ struct hclge_dev {
 	u16 hclge_fd_rule_num;
 	unsigned long serv_processed_cnt;
 	unsigned long last_serv_processed;
+	unsigned long last_rst_scheduled;
+	unsigned long last_mbx_scheduled;
 	unsigned long fd_bmap[BITS_TO_LONGS(MAX_FD_FILTER_NUM)];
 	enum HCLGE_FD_ACTIVE_RULE_TYPE fd_active_type;
 	u8 fd_en;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
index 5182051e5414d..ab6df4c1ea0f6 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
@@ -855,6 +855,14 @@ void hclge_mbx_handler(struct hclge_dev *hdev)
 		if (hnae3_get_bit(req->mbx_need_resp, HCLGE_MBX_NEED_RESP_B) &&
 		    req->msg.code < HCLGE_MBX_GET_VF_FLR_STATUS) {
 			resp_msg.status = ret;
+			if (time_is_before_jiffies(hdev->last_mbx_scheduled +
+						   HCLGE_MBX_SCHED_TIMEOUT))
+				dev_warn(&hdev->pdev->dev,
+					 "resp vport%u mbx(%u,%u) late\n",
+					 req->mbx_src_vfid,
+					 req->msg.code,
+					 req->msg.subcode);
+
 			hclge_gen_resp_to_vf(vport, req, &resp_msg);
 		}
 
-- 
2.43.0

[PATCH 5.15 119/168] net: hns3: add query vf ring and vector map relation

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guangbin Huang <huangguangbin2@huawei.com>

[ Upstream commit a1aed456e3261c0096e36618db9aa61d5974ad16 ]

This patch adds a new mailbox opcode to query map relation between
vf ring and vector.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 669554c512d2 ("net: hns3: direct return when receive a unknown mailbox message")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/hisilicon/hns3/hclge_mbx.h   |  1 +
 .../hisilicon/hns3/hns3pf/hclge_mbx.c         | 83 +++++++++++++++++++
 2 files changed, 84 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
index e1ba0ae055b02..09a2a7c9fca43 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
@@ -46,6 +46,7 @@ enum HCLGE_MBX_OPCODE {
 	HCLGE_MBX_PUSH_PROMISC_INFO,	/* (PF -> VF) push vf promisc info */
 	HCLGE_MBX_VF_UNINIT,            /* (VF -> PF) vf is unintializing */
 	HCLGE_MBX_HANDLE_VF_TBL,	/* (VF -> PF) store/clear hw table */
+	HCLGE_MBX_GET_RING_VECTOR_MAP,	/* (VF -> PF) get ring-to-vector map */
 
 	HCLGE_MBX_GET_VF_FLR_STATUS = 200, /* (M7 -> PF) get vf flr status */
 	HCLGE_MBX_PUSH_LINK_STATUS,	/* (M7 -> PF) get port link status */
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
index ab6df4c1ea0f6..839555bf4bc49 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
@@ -250,6 +250,81 @@ static int hclge_map_unmap_ring_to_vf_vector(struct hclge_vport *vport, bool en,
 	return ret;
 }
 
+static int hclge_query_ring_vector_map(struct hclge_vport *vport,
+				       struct hnae3_ring_chain_node *ring_chain,
+				       struct hclge_desc *desc)
+{
+	struct hclge_ctrl_vector_chain_cmd *req =
+		(struct hclge_ctrl_vector_chain_cmd *)desc->data;
+	struct hclge_dev *hdev = vport->back;
+	u16 tqp_type_and_id;
+	int status;
+
+	hclge_cmd_setup_basic_desc(desc, HCLGE_OPC_ADD_RING_TO_VECTOR, true);
+
+	tqp_type_and_id = le16_to_cpu(req->tqp_type_and_id[0]);
+	hnae3_set_field(tqp_type_and_id, HCLGE_INT_TYPE_M, HCLGE_INT_TYPE_S,
+			hnae3_get_bit(ring_chain->flag, HNAE3_RING_TYPE_B));
+	hnae3_set_field(tqp_type_and_id, HCLGE_TQP_ID_M, HCLGE_TQP_ID_S,
+			ring_chain->tqp_index);
+	req->tqp_type_and_id[0] = cpu_to_le16(tqp_type_and_id);
+	req->vfid = vport->vport_id;
+
+	status = hclge_cmd_send(&hdev->hw, desc, 1);
+	if (status)
+		dev_err(&hdev->pdev->dev,
+			"Get VF ring vector map info fail, status is %d.\n",
+			status);
+
+	return status;
+}
+
+static int hclge_get_vf_ring_vector_map(struct hclge_vport *vport,
+					struct hclge_mbx_vf_to_pf_cmd *req,
+					struct hclge_respond_to_vf_msg *resp)
+{
+#define HCLGE_LIMIT_RING_NUM			1
+#define HCLGE_RING_TYPE_OFFSET			0
+#define HCLGE_TQP_INDEX_OFFSET			1
+#define HCLGE_INT_GL_INDEX_OFFSET		2
+#define HCLGE_VECTOR_ID_OFFSET			3
+#define HCLGE_RING_VECTOR_MAP_INFO_LEN		4
+	struct hnae3_ring_chain_node ring_chain;
+	struct hclge_desc desc;
+	struct hclge_ctrl_vector_chain_cmd *data =
+		(struct hclge_ctrl_vector_chain_cmd *)desc.data;
+	u16 tqp_type_and_id;
+	u8 int_gl_index;
+	int ret;
+
+	req->msg.ring_num = HCLGE_LIMIT_RING_NUM;
+
+	memset(&ring_chain, 0, sizeof(ring_chain));
+	ret = hclge_get_ring_chain_from_mbx(req, &ring_chain, vport);
+	if (ret)
+		return ret;
+
+	ret = hclge_query_ring_vector_map(vport, &ring_chain, &desc);
+	if (ret) {
+		hclge_free_vector_ring_chain(&ring_chain);
+		return ret;
+	}
+
+	tqp_type_and_id = le16_to_cpu(data->tqp_type_and_id[0]);
+	int_gl_index = hnae3_get_field(tqp_type_and_id,
+				       HCLGE_INT_GL_IDX_M, HCLGE_INT_GL_IDX_S);
+
+	resp->data[HCLGE_RING_TYPE_OFFSET] = req->msg.param[0].ring_type;
+	resp->data[HCLGE_TQP_INDEX_OFFSET] = req->msg.param[0].tqp_index;
+	resp->data[HCLGE_INT_GL_INDEX_OFFSET] = int_gl_index;
+	resp->data[HCLGE_VECTOR_ID_OFFSET] = data->int_vector_id_l;
+	resp->len = HCLGE_RING_VECTOR_MAP_INFO_LEN;
+
+	hclge_free_vector_ring_chain(&ring_chain);
+
+	return ret;
+}
+
 static void hclge_set_vf_promisc_mode(struct hclge_vport *vport,
 				      struct hclge_mbx_vf_to_pf_cmd *req)
 {
@@ -749,6 +824,14 @@ void hclge_mbx_handler(struct hclge_dev *hdev)
 			ret = hclge_map_unmap_ring_to_vf_vector(vport, false,
 								req);
 			break;
+		case HCLGE_MBX_GET_RING_VECTOR_MAP:
+			ret = hclge_get_vf_ring_vector_map(vport, req,
+							   &resp_msg);
+			if (ret)
+				dev_err(&hdev->pdev->dev,
+					"PF fail(%d) to get VF ring vector map\n",
+					ret);
+			break;
 		case HCLGE_MBX_SET_PROMISC_MODE:
 			hclge_set_vf_promisc_mode(vport, req);
 			break;
-- 
2.43.0

[PATCH 5.15 120/168] net: hns3: refactor function hclge_mbx_handler()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hao Lan <lanhao@huawei.com>

[ Upstream commit 09431ed8de874881e2d5d430042d718ae074d371 ]

Currently, the function hclge_mbx_handler() has too many switch-case
statements, it makes this function too long. To improve code readability,
refactor this function and use lookup table instead.

Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 669554c512d2 ("net: hns3: direct return when receive a unknown mailbox message")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/hisilicon/hns3/hclge_mbx.h   |  11 +
 .../hisilicon/hns3/hns3pf/hclge_mbx.c         | 415 ++++++++++++------
 2 files changed, 284 insertions(+), 142 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
index 09a2a7c9fca43..debbaa1822aa0 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
@@ -212,6 +212,17 @@ struct hclgevf_mbx_arq_ring {
 	__le16 msg_q[HCLGE_MBX_MAX_ARQ_MSG_NUM][HCLGE_MBX_MAX_ARQ_MSG_SIZE];
 };
 
+struct hclge_dev;
+
+#define HCLGE_MBX_OPCODE_MAX 256
+struct hclge_mbx_ops_param {
+	struct hclge_vport *vport;
+	struct hclge_mbx_vf_to_pf_cmd *req;
+	struct hclge_respond_to_vf_msg *resp_msg;
+};
+
+typedef int (*hclge_mbx_ops_fn)(struct hclge_mbx_ops_param *param);
+
 #define hclge_mbx_ring_ptr_move_crq(crq) \
 	(crq->next_to_use = (crq->next_to_use + 1) % crq->desc_num)
 #define hclge_mbx_tail_ptr_move_arq(arq) \
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
index 839555bf4bc49..39848bcd77c75 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
@@ -774,17 +774,284 @@ static void hclge_handle_vf_tbl(struct hclge_vport *vport,
 	}
 }
 
+static int
+hclge_mbx_map_ring_to_vector_handler(struct hclge_mbx_ops_param *param)
+{
+	return hclge_map_unmap_ring_to_vf_vector(param->vport, true,
+						 param->req);
+}
+
+static int
+hclge_mbx_unmap_ring_to_vector_handler(struct hclge_mbx_ops_param *param)
+{
+	return hclge_map_unmap_ring_to_vf_vector(param->vport, false,
+						 param->req);
+}
+
+static int
+hclge_mbx_get_ring_vector_map_handler(struct hclge_mbx_ops_param *param)
+{
+	int ret;
+
+	ret = hclge_get_vf_ring_vector_map(param->vport, param->req,
+					   param->resp_msg);
+	if (ret)
+		dev_err(&param->vport->back->pdev->dev,
+			"PF fail(%d) to get VF ring vector map\n",
+			ret);
+	return ret;
+}
+
+static int hclge_mbx_set_promisc_mode_handler(struct hclge_mbx_ops_param *param)
+{
+	hclge_set_vf_promisc_mode(param->vport, param->req);
+	return 0;
+}
+
+static int hclge_mbx_set_unicast_handler(struct hclge_mbx_ops_param *param)
+{
+	int ret;
+
+	ret = hclge_set_vf_uc_mac_addr(param->vport, param->req);
+	if (ret)
+		dev_err(&param->vport->back->pdev->dev,
+			"PF fail(%d) to set VF UC MAC Addr\n",
+			ret);
+	return ret;
+}
+
+static int hclge_mbx_set_multicast_handler(struct hclge_mbx_ops_param *param)
+{
+	int ret;
+
+	ret = hclge_set_vf_mc_mac_addr(param->vport, param->req);
+	if (ret)
+		dev_err(&param->vport->back->pdev->dev,
+			"PF fail(%d) to set VF MC MAC Addr\n",
+			ret);
+	return ret;
+}
+
+static int hclge_mbx_set_vlan_handler(struct hclge_mbx_ops_param *param)
+{
+	int ret;
+
+	ret = hclge_set_vf_vlan_cfg(param->vport, param->req, param->resp_msg);
+	if (ret)
+		dev_err(&param->vport->back->pdev->dev,
+			"PF failed(%d) to config VF's VLAN\n",
+			ret);
+	return ret;
+}
+
+static int hclge_mbx_set_alive_handler(struct hclge_mbx_ops_param *param)
+{
+	int ret;
+
+	ret = hclge_set_vf_alive(param->vport, param->req);
+	if (ret)
+		dev_err(&param->vport->back->pdev->dev,
+			"PF failed(%d) to set VF's ALIVE\n",
+			ret);
+	return ret;
+}
+
+static int hclge_mbx_get_qinfo_handler(struct hclge_mbx_ops_param *param)
+{
+	hclge_get_vf_queue_info(param->vport, param->resp_msg);
+	return 0;
+}
+
+static int hclge_mbx_get_qdepth_handler(struct hclge_mbx_ops_param *param)
+{
+	hclge_get_vf_queue_depth(param->vport, param->resp_msg);
+	return 0;
+}
+
+static int hclge_mbx_get_basic_info_handler(struct hclge_mbx_ops_param *param)
+{
+	hclge_get_basic_info(param->vport, param->resp_msg);
+	return 0;
+}
+
+static int hclge_mbx_get_link_status_handler(struct hclge_mbx_ops_param *param)
+{
+	int ret;
+
+	ret = hclge_push_vf_link_status(param->vport);
+	if (ret)
+		dev_err(&param->vport->back->pdev->dev,
+			"failed to inform link stat to VF, ret = %d\n",
+			ret);
+	return ret;
+}
+
+static int hclge_mbx_queue_reset_handler(struct hclge_mbx_ops_param *param)
+{
+	return hclge_mbx_reset_vf_queue(param->vport, param->req,
+					param->resp_msg);
+}
+
+static int hclge_mbx_reset_handler(struct hclge_mbx_ops_param *param)
+{
+	return hclge_reset_vf(param->vport);
+}
+
+static int hclge_mbx_keep_alive_handler(struct hclge_mbx_ops_param *param)
+{
+	hclge_vf_keep_alive(param->vport);
+	return 0;
+}
+
+static int hclge_mbx_set_mtu_handler(struct hclge_mbx_ops_param *param)
+{
+	int ret;
+
+	ret = hclge_set_vf_mtu(param->vport, param->req);
+	if (ret)
+		dev_err(&param->vport->back->pdev->dev,
+			"VF fail(%d) to set mtu\n", ret);
+	return ret;
+}
+
+static int hclge_mbx_get_qid_in_pf_handler(struct hclge_mbx_ops_param *param)
+{
+	return hclge_get_queue_id_in_pf(param->vport, param->req,
+					param->resp_msg);
+}
+
+static int hclge_mbx_get_rss_key_handler(struct hclge_mbx_ops_param *param)
+{
+	return hclge_get_rss_key(param->vport, param->req, param->resp_msg);
+}
+
+static int hclge_mbx_get_link_mode_handler(struct hclge_mbx_ops_param *param)
+{
+	hclge_get_link_mode(param->vport, param->req);
+	return 0;
+}
+
+static int
+hclge_mbx_get_vf_flr_status_handler(struct hclge_mbx_ops_param *param)
+{
+	hclge_rm_vport_all_mac_table(param->vport, false,
+				     HCLGE_MAC_ADDR_UC);
+	hclge_rm_vport_all_mac_table(param->vport, false,
+				     HCLGE_MAC_ADDR_MC);
+	hclge_rm_vport_all_vlan_table(param->vport, false);
+	return 0;
+}
+
+static int hclge_mbx_vf_uninit_handler(struct hclge_mbx_ops_param *param)
+{
+	hclge_rm_vport_all_mac_table(param->vport, true,
+				     HCLGE_MAC_ADDR_UC);
+	hclge_rm_vport_all_mac_table(param->vport, true,
+				     HCLGE_MAC_ADDR_MC);
+	hclge_rm_vport_all_vlan_table(param->vport, true);
+	return 0;
+}
+
+static int hclge_mbx_get_media_type_handler(struct hclge_mbx_ops_param *param)
+{
+	hclge_get_vf_media_type(param->vport, param->resp_msg);
+	return 0;
+}
+
+static int hclge_mbx_push_link_status_handler(struct hclge_mbx_ops_param *param)
+{
+	hclge_handle_link_change_event(param->vport->back, param->req);
+	return 0;
+}
+
+static int hclge_mbx_get_mac_addr_handler(struct hclge_mbx_ops_param *param)
+{
+	hclge_get_vf_mac_addr(param->vport, param->resp_msg);
+	return 0;
+}
+
+static int hclge_mbx_ncsi_error_handler(struct hclge_mbx_ops_param *param)
+{
+	hclge_handle_ncsi_error(param->vport->back);
+	return 0;
+}
+
+static int hclge_mbx_handle_vf_tbl_handler(struct hclge_mbx_ops_param *param)
+{
+	hclge_handle_vf_tbl(param->vport, param->req);
+	return 0;
+}
+
+static const hclge_mbx_ops_fn hclge_mbx_ops_list[HCLGE_MBX_OPCODE_MAX] = {
+	[HCLGE_MBX_RESET]   = hclge_mbx_reset_handler,
+	[HCLGE_MBX_SET_UNICAST] = hclge_mbx_set_unicast_handler,
+	[HCLGE_MBX_SET_MULTICAST] = hclge_mbx_set_multicast_handler,
+	[HCLGE_MBX_SET_VLAN] = hclge_mbx_set_vlan_handler,
+	[HCLGE_MBX_MAP_RING_TO_VECTOR] = hclge_mbx_map_ring_to_vector_handler,
+	[HCLGE_MBX_UNMAP_RING_TO_VECTOR] = hclge_mbx_unmap_ring_to_vector_handler,
+	[HCLGE_MBX_SET_PROMISC_MODE] = hclge_mbx_set_promisc_mode_handler,
+	[HCLGE_MBX_GET_QINFO] = hclge_mbx_get_qinfo_handler,
+	[HCLGE_MBX_GET_QDEPTH] = hclge_mbx_get_qdepth_handler,
+	[HCLGE_MBX_GET_BASIC_INFO] = hclge_mbx_get_basic_info_handler,
+	[HCLGE_MBX_GET_RSS_KEY] = hclge_mbx_get_rss_key_handler,
+	[HCLGE_MBX_GET_MAC_ADDR] = hclge_mbx_get_mac_addr_handler,
+	[HCLGE_MBX_GET_LINK_STATUS] = hclge_mbx_get_link_status_handler,
+	[HCLGE_MBX_QUEUE_RESET] = hclge_mbx_queue_reset_handler,
+	[HCLGE_MBX_KEEP_ALIVE] = hclge_mbx_keep_alive_handler,
+	[HCLGE_MBX_SET_ALIVE] = hclge_mbx_set_alive_handler,
+	[HCLGE_MBX_SET_MTU] = hclge_mbx_set_mtu_handler,
+	[HCLGE_MBX_GET_QID_IN_PF] = hclge_mbx_get_qid_in_pf_handler,
+	[HCLGE_MBX_GET_LINK_MODE] = hclge_mbx_get_link_mode_handler,
+	[HCLGE_MBX_GET_MEDIA_TYPE] = hclge_mbx_get_media_type_handler,
+	[HCLGE_MBX_VF_UNINIT] = hclge_mbx_vf_uninit_handler,
+	[HCLGE_MBX_HANDLE_VF_TBL] = hclge_mbx_handle_vf_tbl_handler,
+	[HCLGE_MBX_GET_RING_VECTOR_MAP] = hclge_mbx_get_ring_vector_map_handler,
+	[HCLGE_MBX_GET_VF_FLR_STATUS] = hclge_mbx_get_vf_flr_status_handler,
+	[HCLGE_MBX_PUSH_LINK_STATUS] = hclge_mbx_push_link_status_handler,
+	[HCLGE_MBX_NCSI_ERROR] = hclge_mbx_ncsi_error_handler,
+};
+
+static void hclge_mbx_request_handling(struct hclge_mbx_ops_param *param)
+{
+	hclge_mbx_ops_fn cmd_func = NULL;
+	struct hclge_dev *hdev;
+	int ret = 0;
+
+	hdev = param->vport->back;
+	cmd_func = hclge_mbx_ops_list[param->req->msg.code];
+	if (cmd_func)
+		ret = cmd_func(param);
+	else
+		dev_err(&hdev->pdev->dev,
+			"un-supported mailbox message, code = %u\n",
+			param->req->msg.code);
+
+	/* PF driver should not reply IMP */
+	if (hnae3_get_bit(param->req->mbx_need_resp, HCLGE_MBX_NEED_RESP_B) &&
+	    param->req->msg.code < HCLGE_MBX_GET_VF_FLR_STATUS) {
+		param->resp_msg->status = ret;
+		if (time_is_before_jiffies(hdev->last_mbx_scheduled +
+					   HCLGE_MBX_SCHED_TIMEOUT))
+			dev_warn(&hdev->pdev->dev,
+				 "resp vport%u mbx(%u,%u) late\n",
+				 param->req->mbx_src_vfid,
+				 param->req->msg.code,
+				 param->req->msg.subcode);
+
+		hclge_gen_resp_to_vf(param->vport, param->req, param->resp_msg);
+	}
+}
+
 void hclge_mbx_handler(struct hclge_dev *hdev)
 {
 	struct hclge_cmq_ring *crq = &hdev->hw.cmq.crq;
 	struct hclge_respond_to_vf_msg resp_msg;
 	struct hclge_mbx_vf_to_pf_cmd *req;
-	struct hclge_vport *vport;
+	struct hclge_mbx_ops_param param;
 	struct hclge_desc *desc;
-	bool is_del = false;
 	unsigned int flag;
-	int ret = 0;
 
+	param.resp_msg = &resp_msg;
 	/* handle all the mailbox requests in the queue */
 	while (!hclge_cmd_crq_empty(&hdev->hw)) {
 		if (test_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state)) {
@@ -808,152 +1075,16 @@ void hclge_mbx_handler(struct hclge_dev *hdev)
 			continue;
 		}
 
-		vport = &hdev->vport[req->mbx_src_vfid];
-
 		trace_hclge_pf_mbx_get(hdev, req);
 
 		/* clear the resp_msg before processing every mailbox message */
 		memset(&resp_msg, 0, sizeof(resp_msg));
-
-		switch (req->msg.code) {
-		case HCLGE_MBX_MAP_RING_TO_VECTOR:
-			ret = hclge_map_unmap_ring_to_vf_vector(vport, true,
-								req);
-			break;
-		case HCLGE_MBX_UNMAP_RING_TO_VECTOR:
-			ret = hclge_map_unmap_ring_to_vf_vector(vport, false,
-								req);
-			break;
-		case HCLGE_MBX_GET_RING_VECTOR_MAP:
-			ret = hclge_get_vf_ring_vector_map(vport, req,
-							   &resp_msg);
-			if (ret)
-				dev_err(&hdev->pdev->dev,
-					"PF fail(%d) to get VF ring vector map\n",
-					ret);
-			break;
-		case HCLGE_MBX_SET_PROMISC_MODE:
-			hclge_set_vf_promisc_mode(vport, req);
-			break;
-		case HCLGE_MBX_SET_UNICAST:
-			ret = hclge_set_vf_uc_mac_addr(vport, req);
-			if (ret)
-				dev_err(&hdev->pdev->dev,
-					"PF fail(%d) to set VF UC MAC Addr\n",
-					ret);
-			break;
-		case HCLGE_MBX_SET_MULTICAST:
-			ret = hclge_set_vf_mc_mac_addr(vport, req);
-			if (ret)
-				dev_err(&hdev->pdev->dev,
-					"PF fail(%d) to set VF MC MAC Addr\n",
-					ret);
-			break;
-		case HCLGE_MBX_SET_VLAN:
-			ret = hclge_set_vf_vlan_cfg(vport, req, &resp_msg);
-			if (ret)
-				dev_err(&hdev->pdev->dev,
-					"PF failed(%d) to config VF's VLAN\n",
-					ret);
-			break;
-		case HCLGE_MBX_SET_ALIVE:
-			ret = hclge_set_vf_alive(vport, req);
-			if (ret)
-				dev_err(&hdev->pdev->dev,
-					"PF failed(%d) to set VF's ALIVE\n",
-					ret);
-			break;
-		case HCLGE_MBX_GET_QINFO:
-			hclge_get_vf_queue_info(vport, &resp_msg);
-			break;
-		case HCLGE_MBX_GET_QDEPTH:
-			hclge_get_vf_queue_depth(vport, &resp_msg);
-			break;
-		case HCLGE_MBX_GET_BASIC_INFO:
-			hclge_get_basic_info(vport, &resp_msg);
-			break;
-		case HCLGE_MBX_GET_LINK_STATUS:
-			ret = hclge_push_vf_link_status(vport);
-			if (ret)
-				dev_err(&hdev->pdev->dev,
-					"failed to inform link stat to VF, ret = %d\n",
-					ret);
-			break;
-		case HCLGE_MBX_QUEUE_RESET:
-			ret = hclge_mbx_reset_vf_queue(vport, req, &resp_msg);
-			break;
-		case HCLGE_MBX_RESET:
-			ret = hclge_reset_vf(vport);
-			break;
-		case HCLGE_MBX_KEEP_ALIVE:
-			hclge_vf_keep_alive(vport);
-			break;
-		case HCLGE_MBX_SET_MTU:
-			ret = hclge_set_vf_mtu(vport, req);
-			if (ret)
-				dev_err(&hdev->pdev->dev,
-					"VF fail(%d) to set mtu\n", ret);
-			break;
-		case HCLGE_MBX_GET_QID_IN_PF:
-			ret = hclge_get_queue_id_in_pf(vport, req, &resp_msg);
-			break;
-		case HCLGE_MBX_GET_RSS_KEY:
-			ret = hclge_get_rss_key(vport, req, &resp_msg);
-			break;
-		case HCLGE_MBX_GET_LINK_MODE:
-			hclge_get_link_mode(vport, req);
-			break;
-		case HCLGE_MBX_GET_VF_FLR_STATUS:
-		case HCLGE_MBX_VF_UNINIT:
-			is_del = req->msg.code == HCLGE_MBX_VF_UNINIT;
-			hclge_rm_vport_all_mac_table(vport, is_del,
-						     HCLGE_MAC_ADDR_UC);
-			hclge_rm_vport_all_mac_table(vport, is_del,
-						     HCLGE_MAC_ADDR_MC);
-			hclge_rm_vport_all_vlan_table(vport, is_del);
-			break;
-		case HCLGE_MBX_GET_MEDIA_TYPE:
-			hclge_get_vf_media_type(vport, &resp_msg);
-			break;
-		case HCLGE_MBX_PUSH_LINK_STATUS:
-			hclge_handle_link_change_event(hdev, req);
-			break;
-		case HCLGE_MBX_GET_MAC_ADDR:
-			hclge_get_vf_mac_addr(vport, &resp_msg);
-			break;
-		case HCLGE_MBX_NCSI_ERROR:
-			hclge_handle_ncsi_error(hdev);
-			break;
-		case HCLGE_MBX_HANDLE_VF_TBL:
-			hclge_handle_vf_tbl(vport, req);
-			break;
-		default:
-			dev_err(&hdev->pdev->dev,
-				"un-supported mailbox message, code = %u\n",
-				req->msg.code);
-			break;
-		}
-
-		/* PF driver should not reply IMP */
-		if (hnae3_get_bit(req->mbx_need_resp, HCLGE_MBX_NEED_RESP_B) &&
-		    req->msg.code < HCLGE_MBX_GET_VF_FLR_STATUS) {
-			resp_msg.status = ret;
-			if (time_is_before_jiffies(hdev->last_mbx_scheduled +
-						   HCLGE_MBX_SCHED_TIMEOUT))
-				dev_warn(&hdev->pdev->dev,
-					 "resp vport%u mbx(%u,%u) late\n",
-					 req->mbx_src_vfid,
-					 req->msg.code,
-					 req->msg.subcode);
-
-			hclge_gen_resp_to_vf(vport, req, &resp_msg);
-		}
+		param.vport = &hdev->vport[req->mbx_src_vfid];
+		param.req = req;
+		hclge_mbx_request_handling(&param);
 
 		crq->desc[crq->next_to_use].flag = 0;
 		hclge_mbx_ring_ptr_move_crq(crq);
-
-		/* reinitialize ret after complete the mbx message processing */
-		ret = 0;
 	}
 
 	/* Write back CMDQ_RQ header pointer, M7 need this pointer */
-- 
2.43.0

[PATCH 5.15 121/168] net: hns3: direct return when receive a unknown mailbox message

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit 669554c512d2107e2f21616f38e050d40655101f ]

Currently, the driver didn't return when receive a unknown
mailbox message, and continue checking whether need to
generate a response. It's unnecessary and may be incorrect.

Fixes: bb5790b71bad ("net: hns3: refactor mailbox response scheme between PF and VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
index 39848bcd77c75..1bd3d6056163b 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
@@ -1019,12 +1019,13 @@ static void hclge_mbx_request_handling(struct hclge_mbx_ops_param *param)
 
 	hdev = param->vport->back;
 	cmd_func = hclge_mbx_ops_list[param->req->msg.code];
-	if (cmd_func)
-		ret = cmd_func(param);
-	else
+	if (!cmd_func) {
 		dev_err(&hdev->pdev->dev,
 			"un-supported mailbox message, code = %u\n",
 			param->req->msg.code);
+		return;
+	}
+	ret = cmd_func(param);
 
 	/* PF driver should not reply IMP */
 	if (hnae3_get_bit(param->req->mbx_need_resp, HCLGE_MBX_NEED_RESP_B) &&
-- 
2.43.0

[PATCH 5.15 122/168] net: hns3: refactor hns3 makefile to support hns3_common module

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jie Wang <wangjie125@huawei.com>

[ Upstream commit 5f20be4e90e603d8967962f81ac89307fd4f8af9 ]

Currently we plan to refactor PF and VF cmdq module. A new file folder
hns3_common will be created to store new common APIs used by PF and VF
cmdq module. Thus the PF and VF compilation process will both depends on
the hns3_common. This may cause parallel building problems if we add a new
makefile building unit.

So this patch combined the PF and VF makefile scripts to the top level
makefile to support the new hns3_common which will be created in the next
patch.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 6639a7b95321 ("net: hns3: change type of numa_node_mask as nodemask_t")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/Makefile       | 14 +++++++++++---
 .../net/ethernet/hisilicon/hns3/hns3pf/Makefile    | 12 ------------
 .../net/ethernet/hisilicon/hns3/hns3vf/Makefile    | 10 ----------
 3 files changed, 11 insertions(+), 25 deletions(-)
 delete mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile
 delete mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile

diff --git a/drivers/net/ethernet/hisilicon/hns3/Makefile b/drivers/net/ethernet/hisilicon/hns3/Makefile
index 7aa2fac76c5e8..32e24e0945f5e 100644
--- a/drivers/net/ethernet/hisilicon/hns3/Makefile
+++ b/drivers/net/ethernet/hisilicon/hns3/Makefile
@@ -4,9 +4,8 @@
 #
 
 ccflags-y += -I$(srctree)/$(src)
-
-obj-$(CONFIG_HNS3) += hns3pf/
-obj-$(CONFIG_HNS3) += hns3vf/
+ccflags-y += -I$(srctree)/drivers/net/ethernet/hisilicon/hns3/hns3pf
+ccflags-y += -I$(srctree)/drivers/net/ethernet/hisilicon/hns3/hns3vf
 
 obj-$(CONFIG_HNS3) += hnae3.o
 
@@ -14,3 +13,12 @@ obj-$(CONFIG_HNS3_ENET) += hns3.o
 hns3-objs = hns3_enet.o hns3_ethtool.o hns3_debugfs.o
 
 hns3-$(CONFIG_HNS3_DCB) += hns3_dcbnl.o
+
+obj-$(CONFIG_HNS3_HCLGEVF) += hclgevf.o
+hclgevf-objs = hns3vf/hclgevf_main.o hns3vf/hclgevf_cmd.o hns3vf/hclgevf_mbx.o  hns3vf/hclgevf_devlink.o
+
+obj-$(CONFIG_HNS3_HCLGE) += hclge.o
+hclge-objs = hns3pf/hclge_main.o hns3pf/hclge_cmd.o hns3pf/hclge_mdio.o hns3pf/hclge_tm.o \
+		hns3pf/hclge_mbx.o hns3pf/hclge_err.o  hns3pf/hclge_debugfs.o hns3pf/hclge_ptp.o hns3pf/hclge_devlink.o
+
+hclge-$(CONFIG_HNS3_DCB) += hns3pf/hclge_dcb.o
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile b/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile
deleted file mode 100644
index d1bf5c4c0abbc..0000000000000
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Makefile for the HISILICON network device drivers.
-#
-
-ccflags-y := -I $(srctree)/drivers/net/ethernet/hisilicon/hns3
-ccflags-y += -I $(srctree)/$(src)
-
-obj-$(CONFIG_HNS3_HCLGE) += hclge.o
-hclge-objs = hclge_main.o hclge_cmd.o hclge_mdio.o hclge_tm.o hclge_mbx.o hclge_err.o  hclge_debugfs.o hclge_ptp.o hclge_devlink.o
-
-hclge-$(CONFIG_HNS3_DCB) += hclge_dcb.o
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile b/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile
deleted file mode 100644
index 51ff7d86ee906..0000000000000
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Makefile for the HISILICON network device drivers.
-#
-
-ccflags-y := -I $(srctree)/drivers/net/ethernet/hisilicon/hns3
-ccflags-y += -I $(srctree)/$(src)
-
-obj-$(CONFIG_HNS3_HCLGEVF) += hclgevf.o
-hclgevf-objs = hclgevf_main.o hclgevf_cmd.o hclgevf_mbx.o  hclgevf_devlink.o
-- 
2.43.0

[PATCH 5.15 123/168] net: hns3: create new cmdq hardware description structure hclge_comm_hw

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jie Wang <wangjie125@huawei.com>

[ Upstream commit 0a7b6d221868be6aa3249c70ffab707a265b89d6 ]

Currently PF and VF cmdq APIs use struct hclge(vf)_hw to describe cmdq
hardware information needed by hclge(vf)_cmd_send. There are a little
differences between its child struct hclge_cmq_ring and hclgevf_cmq_ring.
It is redundent to use two sets of structures to support same functions.

So this patch creates new set of common cmdq hardware description
structures(hclge_comm_hw) to unify PF and VF cmdq functions. The struct
hclge_desc is still kept to avoid too many meaningless replacement.

These new structures will be used to unify hclge(vf)_hw structures in PF
and VF cmdq APIs in next patches.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 6639a7b95321 ("net: hns3: change type of numa_node_mask as nodemask_t")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/Makefile  |  1 +
 .../hns3/hns3_common/hclge_comm_cmd.h         | 55 +++++++++++++++++++
 .../hisilicon/hns3/hns3pf/hclge_cmd.h         |  9 +--
 3 files changed, 57 insertions(+), 8 deletions(-)
 create mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_cmd.h

diff --git a/drivers/net/ethernet/hisilicon/hns3/Makefile b/drivers/net/ethernet/hisilicon/hns3/Makefile
index 32e24e0945f5e..33e546cef2881 100644
--- a/drivers/net/ethernet/hisilicon/hns3/Makefile
+++ b/drivers/net/ethernet/hisilicon/hns3/Makefile
@@ -6,6 +6,7 @@
 ccflags-y += -I$(srctree)/$(src)
 ccflags-y += -I$(srctree)/drivers/net/ethernet/hisilicon/hns3/hns3pf
 ccflags-y += -I$(srctree)/drivers/net/ethernet/hisilicon/hns3/hns3vf
+ccflags-y += -I$(srctree)/drivers/net/ethernet/hisilicon/hns3/hns3_common
 
 obj-$(CONFIG_HNS3) += hnae3.o
 
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_cmd.h
new file mode 100644
index 0000000000000..f1e39003ceebe
--- /dev/null
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_cmd.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+// Copyright (c) 2021-2021 Hisilicon Limited.
+
+#ifndef __HCLGE_COMM_CMD_H
+#define __HCLGE_COMM_CMD_H
+#include <linux/types.h>
+
+#include "hnae3.h"
+
+#define HCLGE_DESC_DATA_LEN		6
+struct hclge_desc {
+	__le16 opcode;
+	__le16 flag;
+	__le16 retval;
+	__le16 rsv;
+	__le32 data[HCLGE_DESC_DATA_LEN];
+};
+
+struct hclge_comm_cmq_ring {
+	dma_addr_t desc_dma_addr;
+	struct hclge_desc *desc;
+	struct pci_dev *pdev;
+	u32 head;
+	u32 tail;
+
+	u16 buf_size;
+	u16 desc_num;
+	int next_to_use;
+	int next_to_clean;
+	u8 ring_type; /* cmq ring type */
+	spinlock_t lock; /* Command queue lock */
+};
+
+enum hclge_comm_cmd_status {
+	HCLGE_COMM_STATUS_SUCCESS	= 0,
+	HCLGE_COMM_ERR_CSQ_FULL		= -1,
+	HCLGE_COMM_ERR_CSQ_TIMEOUT	= -2,
+	HCLGE_COMM_ERR_CSQ_ERROR	= -3,
+};
+
+struct hclge_comm_cmq {
+	struct hclge_comm_cmq_ring csq;
+	struct hclge_comm_cmq_ring crq;
+	u16 tx_timeout;
+	enum hclge_comm_cmd_status last_status;
+};
+
+struct hclge_comm_hw {
+	void __iomem *io_base;
+	void __iomem *mem_base;
+	struct hclge_comm_cmq cmq;
+	unsigned long comm_state;
+};
+
+#endif
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
index cfbb7c51b0cb3..e07709ef239df 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
@@ -7,24 +7,17 @@
 #include <linux/io.h>
 #include <linux/etherdevice.h>
 #include "hnae3.h"
+#include "hclge_comm_cmd.h"
 
 #define HCLGE_CMDQ_TX_TIMEOUT		30000
 #define HCLGE_CMDQ_CLEAR_WAIT_TIME	200
 #define HCLGE_DESC_DATA_LEN		6
 
 struct hclge_dev;
-struct hclge_desc {
-	__le16 opcode;
 
 #define HCLGE_CMDQ_RX_INVLD_B		0
 #define HCLGE_CMDQ_RX_OUTVLD_B		1
 
-	__le16 flag;
-	__le16 retval;
-	__le16 rsv;
-	__le32 data[HCLGE_DESC_DATA_LEN];
-};
-
 struct hclge_cmq_ring {
 	dma_addr_t desc_dma_addr;
 	struct hclge_desc *desc;
-- 
2.43.0

[PATCH 5.15 124/168] net: hns3: create new set of unified hclge_comm_cmd_send APIs

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jie Wang <wangjie125@huawei.com>

[ Upstream commit 8d307f8e8cf195921b10939dde673f1f039bd732 ]

This patch create new set of unified hclge_comm_cmd_send APIs for PF and VF
cmdq module. Subfunctions called by hclge_comm_cmd_send are also created
include cmdq result check, cmdq return code conversion and ring space
opertaion APIs.

These new common cmdq APIs will be used to replace the old PF and VF cmdq
APIs in next patches.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 6639a7b95321 ("net: hns3: change type of numa_node_mask as nodemask_t")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../hns3/hns3_common/hclge_comm_cmd.c         | 259 ++++++++++++++++++
 .../hns3/hns3_common/hclge_comm_cmd.h         |  66 +++++
 2 files changed, 325 insertions(+)
 create mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_cmd.c

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_cmd.c b/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_cmd.c
new file mode 100644
index 0000000000000..89e999248b9af
--- /dev/null
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_cmd.c
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021-2021 Hisilicon Limited.
+
+#include "hnae3.h"
+#include "hclge_comm_cmd.h"
+
+static bool hclge_is_elem_in_array(const u16 *spec_opcode, u32 size, u16 opcode)
+{
+	u32 i;
+
+	for (i = 0; i < size; i++) {
+		if (spec_opcode[i] == opcode)
+			return true;
+	}
+
+	return false;
+}
+
+static const u16 pf_spec_opcode[] = { HCLGE_COMM_OPC_STATS_64_BIT,
+				      HCLGE_COMM_OPC_STATS_32_BIT,
+				      HCLGE_COMM_OPC_STATS_MAC,
+				      HCLGE_COMM_OPC_STATS_MAC_ALL,
+				      HCLGE_COMM_OPC_QUERY_32_BIT_REG,
+				      HCLGE_COMM_OPC_QUERY_64_BIT_REG,
+				      HCLGE_COMM_QUERY_CLEAR_MPF_RAS_INT,
+				      HCLGE_COMM_QUERY_CLEAR_PF_RAS_INT,
+				      HCLGE_COMM_QUERY_CLEAR_ALL_MPF_MSIX_INT,
+				      HCLGE_COMM_QUERY_CLEAR_ALL_PF_MSIX_INT,
+				      HCLGE_COMM_QUERY_ALL_ERR_INFO };
+
+static const u16 vf_spec_opcode[] = { HCLGE_COMM_OPC_STATS_64_BIT,
+				      HCLGE_COMM_OPC_STATS_32_BIT,
+				      HCLGE_COMM_OPC_STATS_MAC };
+
+static bool hclge_comm_is_special_opcode(u16 opcode, bool is_pf)
+{
+	/* these commands have several descriptors,
+	 * and use the first one to save opcode and return value
+	 */
+	const u16 *spec_opcode = is_pf ? pf_spec_opcode : vf_spec_opcode;
+	u32 size = is_pf ? ARRAY_SIZE(pf_spec_opcode) :
+				ARRAY_SIZE(vf_spec_opcode);
+
+	return hclge_is_elem_in_array(spec_opcode, size, opcode);
+}
+
+static int hclge_comm_ring_space(struct hclge_comm_cmq_ring *ring)
+{
+	int ntc = ring->next_to_clean;
+	int ntu = ring->next_to_use;
+	int used = (ntu - ntc + ring->desc_num) % ring->desc_num;
+
+	return ring->desc_num - used - 1;
+}
+
+static void hclge_comm_cmd_copy_desc(struct hclge_comm_hw *hw,
+				     struct hclge_desc *desc, int num)
+{
+	struct hclge_desc *desc_to_use;
+	int handle = 0;
+
+	while (handle < num) {
+		desc_to_use = &hw->cmq.csq.desc[hw->cmq.csq.next_to_use];
+		*desc_to_use = desc[handle];
+		(hw->cmq.csq.next_to_use)++;
+		if (hw->cmq.csq.next_to_use >= hw->cmq.csq.desc_num)
+			hw->cmq.csq.next_to_use = 0;
+		handle++;
+	}
+}
+
+static int hclge_comm_is_valid_csq_clean_head(struct hclge_comm_cmq_ring *ring,
+					      int head)
+{
+	int ntc = ring->next_to_clean;
+	int ntu = ring->next_to_use;
+
+	if (ntu > ntc)
+		return head >= ntc && head <= ntu;
+
+	return head >= ntc || head <= ntu;
+}
+
+static int hclge_comm_cmd_csq_clean(struct hclge_comm_hw *hw)
+{
+	struct hclge_comm_cmq_ring *csq = &hw->cmq.csq;
+	int clean;
+	u32 head;
+
+	head = hclge_comm_read_dev(hw, HCLGE_COMM_NIC_CSQ_HEAD_REG);
+	rmb(); /* Make sure head is ready before touch any data */
+
+	if (!hclge_comm_is_valid_csq_clean_head(csq, head)) {
+		dev_warn(&hw->cmq.csq.pdev->dev, "wrong cmd head (%u, %d-%d)\n",
+			 head, csq->next_to_use, csq->next_to_clean);
+		dev_warn(&hw->cmq.csq.pdev->dev,
+			 "Disabling any further commands to IMP firmware\n");
+		set_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hw->comm_state);
+		dev_warn(&hw->cmq.csq.pdev->dev,
+			 "IMP firmware watchdog reset soon expected!\n");
+		return -EIO;
+	}
+
+	clean = (head - csq->next_to_clean + csq->desc_num) % csq->desc_num;
+	csq->next_to_clean = head;
+	return clean;
+}
+
+static int hclge_comm_cmd_csq_done(struct hclge_comm_hw *hw)
+{
+	u32 head = hclge_comm_read_dev(hw, HCLGE_COMM_NIC_CSQ_HEAD_REG);
+	return head == hw->cmq.csq.next_to_use;
+}
+
+static void hclge_comm_wait_for_resp(struct hclge_comm_hw *hw,
+				     bool *is_completed)
+{
+	u32 timeout = 0;
+
+	do {
+		if (hclge_comm_cmd_csq_done(hw)) {
+			*is_completed = true;
+			break;
+		}
+		udelay(1);
+		timeout++;
+	} while (timeout < hw->cmq.tx_timeout);
+}
+
+static int hclge_comm_cmd_convert_err_code(u16 desc_ret)
+{
+	struct hclge_comm_errcode hclge_comm_cmd_errcode[] = {
+		{ HCLGE_COMM_CMD_EXEC_SUCCESS, 0 },
+		{ HCLGE_COMM_CMD_NO_AUTH, -EPERM },
+		{ HCLGE_COMM_CMD_NOT_SUPPORTED, -EOPNOTSUPP },
+		{ HCLGE_COMM_CMD_QUEUE_FULL, -EXFULL },
+		{ HCLGE_COMM_CMD_NEXT_ERR, -ENOSR },
+		{ HCLGE_COMM_CMD_UNEXE_ERR, -ENOTBLK },
+		{ HCLGE_COMM_CMD_PARA_ERR, -EINVAL },
+		{ HCLGE_COMM_CMD_RESULT_ERR, -ERANGE },
+		{ HCLGE_COMM_CMD_TIMEOUT, -ETIME },
+		{ HCLGE_COMM_CMD_HILINK_ERR, -ENOLINK },
+		{ HCLGE_COMM_CMD_QUEUE_ILLEGAL, -ENXIO },
+		{ HCLGE_COMM_CMD_INVALID, -EBADR },
+	};
+	u32 errcode_count = ARRAY_SIZE(hclge_comm_cmd_errcode);
+	u32 i;
+
+	for (i = 0; i < errcode_count; i++)
+		if (hclge_comm_cmd_errcode[i].imp_errcode == desc_ret)
+			return hclge_comm_cmd_errcode[i].common_errno;
+
+	return -EIO;
+}
+
+static int hclge_comm_cmd_check_retval(struct hclge_comm_hw *hw,
+				       struct hclge_desc *desc, int num,
+				       int ntc, bool is_pf)
+{
+	u16 opcode, desc_ret;
+	int handle;
+
+	opcode = le16_to_cpu(desc[0].opcode);
+	for (handle = 0; handle < num; handle++) {
+		desc[handle] = hw->cmq.csq.desc[ntc];
+		ntc++;
+		if (ntc >= hw->cmq.csq.desc_num)
+			ntc = 0;
+	}
+	if (likely(!hclge_comm_is_special_opcode(opcode, is_pf)))
+		desc_ret = le16_to_cpu(desc[num - 1].retval);
+	else
+		desc_ret = le16_to_cpu(desc[0].retval);
+
+	hw->cmq.last_status = desc_ret;
+
+	return hclge_comm_cmd_convert_err_code(desc_ret);
+}
+
+static int hclge_comm_cmd_check_result(struct hclge_comm_hw *hw,
+				       struct hclge_desc *desc,
+				       int num, int ntc, bool is_pf)
+{
+	bool is_completed = false;
+	int handle, ret;
+
+	/* If the command is sync, wait for the firmware to write back,
+	 * if multi descriptors to be sent, use the first one to check
+	 */
+	if (HCLGE_COMM_SEND_SYNC(le16_to_cpu(desc->flag)))
+		hclge_comm_wait_for_resp(hw, &is_completed);
+
+	if (!is_completed)
+		ret = -EBADE;
+	else
+		ret = hclge_comm_cmd_check_retval(hw, desc, num, ntc, is_pf);
+
+	/* Clean the command send queue */
+	handle = hclge_comm_cmd_csq_clean(hw);
+	if (handle < 0)
+		ret = handle;
+	else if (handle != num)
+		dev_warn(&hw->cmq.csq.pdev->dev,
+			 "cleaned %d, need to clean %d\n", handle, num);
+	return ret;
+}
+
+/**
+ * hclge_comm_cmd_send - send command to command queue
+ * @hw: pointer to the hw struct
+ * @desc: prefilled descriptor for describing the command
+ * @num : the number of descriptors to be sent
+ * @is_pf: bool to judge pf/vf module
+ *
+ * This is the main send command for command queue, it
+ * sends the queue, cleans the queue, etc
+ **/
+int hclge_comm_cmd_send(struct hclge_comm_hw *hw, struct hclge_desc *desc,
+			int num, bool is_pf)
+{
+	struct hclge_comm_cmq_ring *csq = &hw->cmq.csq;
+	int ret;
+	int ntc;
+
+	spin_lock_bh(&hw->cmq.csq.lock);
+
+	if (test_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hw->comm_state)) {
+		spin_unlock_bh(&hw->cmq.csq.lock);
+		return -EBUSY;
+	}
+
+	if (num > hclge_comm_ring_space(&hw->cmq.csq)) {
+		/* If CMDQ ring is full, SW HEAD and HW HEAD may be different,
+		 * need update the SW HEAD pointer csq->next_to_clean
+		 */
+		csq->next_to_clean =
+			hclge_comm_read_dev(hw, HCLGE_COMM_NIC_CSQ_HEAD_REG);
+		spin_unlock_bh(&hw->cmq.csq.lock);
+		return -EBUSY;
+	}
+
+	/**
+	 * Record the location of desc in the ring for this time
+	 * which will be use for hardware to write back
+	 */
+	ntc = hw->cmq.csq.next_to_use;
+
+	hclge_comm_cmd_copy_desc(hw, desc, num);
+
+	/* Write to hardware */
+	hclge_comm_write_dev(hw, HCLGE_COMM_NIC_CSQ_TAIL_REG,
+			     hw->cmq.csq.next_to_use);
+
+	ret = hclge_comm_cmd_check_result(hw, desc, num, ntc, is_pf);
+
+	spin_unlock_bh(&hw->cmq.csq.lock);
+
+	return ret;
+}
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_cmd.h
index f1e39003ceebe..5164c666cae71 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_cmd.h
@@ -7,6 +7,52 @@
 
 #include "hnae3.h"
 
+#define HCLGE_COMM_CMD_FLAG_NO_INTR		BIT(4)
+
+#define HCLGE_COMM_SEND_SYNC(flag) \
+	((flag) & HCLGE_COMM_CMD_FLAG_NO_INTR)
+
+#define HCLGE_COMM_NIC_CSQ_TAIL_REG		0x27010
+#define HCLGE_COMM_NIC_CSQ_HEAD_REG		0x27014
+
+enum hclge_comm_cmd_return_status {
+	HCLGE_COMM_CMD_EXEC_SUCCESS	= 0,
+	HCLGE_COMM_CMD_NO_AUTH		= 1,
+	HCLGE_COMM_CMD_NOT_SUPPORTED	= 2,
+	HCLGE_COMM_CMD_QUEUE_FULL	= 3,
+	HCLGE_COMM_CMD_NEXT_ERR		= 4,
+	HCLGE_COMM_CMD_UNEXE_ERR	= 5,
+	HCLGE_COMM_CMD_PARA_ERR		= 6,
+	HCLGE_COMM_CMD_RESULT_ERR	= 7,
+	HCLGE_COMM_CMD_TIMEOUT		= 8,
+	HCLGE_COMM_CMD_HILINK_ERR	= 9,
+	HCLGE_COMM_CMD_QUEUE_ILLEGAL	= 10,
+	HCLGE_COMM_CMD_INVALID		= 11,
+};
+
+enum hclge_comm_special_cmd {
+	HCLGE_COMM_OPC_STATS_64_BIT		= 0x0030,
+	HCLGE_COMM_OPC_STATS_32_BIT		= 0x0031,
+	HCLGE_COMM_OPC_STATS_MAC		= 0x0032,
+	HCLGE_COMM_OPC_STATS_MAC_ALL		= 0x0034,
+	HCLGE_COMM_OPC_QUERY_32_BIT_REG		= 0x0041,
+	HCLGE_COMM_OPC_QUERY_64_BIT_REG		= 0x0042,
+	HCLGE_COMM_QUERY_CLEAR_MPF_RAS_INT	= 0x1511,
+	HCLGE_COMM_QUERY_CLEAR_PF_RAS_INT	= 0x1512,
+	HCLGE_COMM_QUERY_CLEAR_ALL_MPF_MSIX_INT	= 0x1514,
+	HCLGE_COMM_QUERY_CLEAR_ALL_PF_MSIX_INT	= 0x1515,
+	HCLGE_COMM_QUERY_ALL_ERR_INFO		= 0x1517,
+};
+
+enum hclge_comm_cmd_state {
+	HCLGE_COMM_STATE_CMD_DISABLE,
+};
+
+struct hclge_comm_errcode {
+	u32 imp_errcode;
+	int common_errno;
+};
+
 #define HCLGE_DESC_DATA_LEN		6
 struct hclge_desc {
 	__le16 opcode;
@@ -52,4 +98,24 @@ struct hclge_comm_hw {
 	unsigned long comm_state;
 };
 
+static inline void hclge_comm_write_reg(void __iomem *base, u32 reg, u32 value)
+{
+	writel(value, base + reg);
+}
+
+static inline u32 hclge_comm_read_reg(u8 __iomem *base, u32 reg)
+{
+	u8 __iomem *reg_addr = READ_ONCE(base);
+
+	return readl(reg_addr + reg);
+}
+
+#define hclge_comm_write_dev(a, reg, value) \
+	hclge_comm_write_reg((a)->io_base, reg, value)
+#define hclge_comm_read_dev(a, reg) \
+	hclge_comm_read_reg((a)->io_base, reg)
+
+int hclge_comm_cmd_send(struct hclge_comm_hw *hw, struct hclge_desc *desc,
+			int num, bool is_pf);
+
 #endif
-- 
2.43.0

[PATCH 5.15 125/168] net: hns3: refactor hclge_cmd_send with new hclge_comm_cmd_send API

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jie Wang <wangjie125@huawei.com>

[ Upstream commit eaa5607db377a73e639162a459d8b125c6a67bfb ]

This patch firstly uses new hardware description struct hclge_comm_hw as
child member of hclge_hw and deletes the original child memebers of
hclge_hw. All the hclge_hw variables used in PF module is modified
according to the new hclge_hw.

Secondly hclge_cmd_send is refactored to use hclge_comm_cmd_send APIs. The
old functions called by hclge_cmd_send are deleted and hclge_cmd_send is
kept to avoid too many meaningless modifications.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 6639a7b95321 ("net: hns3: change type of numa_node_mask as nodemask_t")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/Makefile  |   7 +-
 .../hisilicon/hns3/hns3pf/hclge_cmd.c         | 311 +++---------------
 .../hisilicon/hns3/hns3pf/hclge_cmd.h         |  72 +---
 .../hisilicon/hns3/hns3pf/hclge_main.c        |  56 ++--
 .../hisilicon/hns3/hns3pf/hclge_main.h        |  10 +-
 .../hisilicon/hns3/hns3pf/hclge_mbx.c         |  11 +-
 .../hisilicon/hns3/hns3pf/hclge_mdio.c        |   4 +-
 .../hisilicon/hns3/hns3pf/hclge_ptp.c         |   2 +-
 8 files changed, 100 insertions(+), 373 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/Makefile b/drivers/net/ethernet/hisilicon/hns3/Makefile
index 33e546cef2881..cb3aaf5252d07 100644
--- a/drivers/net/ethernet/hisilicon/hns3/Makefile
+++ b/drivers/net/ethernet/hisilicon/hns3/Makefile
@@ -16,10 +16,13 @@ hns3-objs = hns3_enet.o hns3_ethtool.o hns3_debugfs.o
 hns3-$(CONFIG_HNS3_DCB) += hns3_dcbnl.o
 
 obj-$(CONFIG_HNS3_HCLGEVF) += hclgevf.o
-hclgevf-objs = hns3vf/hclgevf_main.o hns3vf/hclgevf_cmd.o hns3vf/hclgevf_mbx.o  hns3vf/hclgevf_devlink.o
+
+hclgevf-objs = hns3vf/hclgevf_main.o hns3vf/hclgevf_cmd.o hns3vf/hclgevf_mbx.o  hns3vf/hclgevf_devlink.o \
+		hns3_common/hclge_comm_cmd.o
 
 obj-$(CONFIG_HNS3_HCLGE) += hclge.o
 hclge-objs = hns3pf/hclge_main.o hns3pf/hclge_cmd.o hns3pf/hclge_mdio.o hns3pf/hclge_tm.o \
-		hns3pf/hclge_mbx.o hns3pf/hclge_err.o  hns3pf/hclge_debugfs.o hns3pf/hclge_ptp.o hns3pf/hclge_devlink.o
+		hns3pf/hclge_mbx.o hns3pf/hclge_err.o  hns3pf/hclge_debugfs.o hns3pf/hclge_ptp.o hns3pf/hclge_devlink.o \
+		hns3_common/hclge_comm_cmd.o
 
 hclge-$(CONFIG_HNS3_DCB) += hns3pf/hclge_dcb.o
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
index 9c2eeaa822944..59dd2283d25bb 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
@@ -11,46 +11,24 @@
 #include "hnae3.h"
 #include "hclge_main.h"
 
-#define cmq_ring_to_dev(ring)   (&(ring)->dev->pdev->dev)
-
-static int hclge_ring_space(struct hclge_cmq_ring *ring)
-{
-	int ntu = ring->next_to_use;
-	int ntc = ring->next_to_clean;
-	int used = (ntu - ntc + ring->desc_num) % ring->desc_num;
-
-	return ring->desc_num - used - 1;
-}
-
-static int is_valid_csq_clean_head(struct hclge_cmq_ring *ring, int head)
-{
-	int ntu = ring->next_to_use;
-	int ntc = ring->next_to_clean;
-
-	if (ntu > ntc)
-		return head >= ntc && head <= ntu;
-
-	return head >= ntc || head <= ntu;
-}
-
-static int hclge_alloc_cmd_desc(struct hclge_cmq_ring *ring)
+static int hclge_alloc_cmd_desc(struct hclge_comm_cmq_ring *ring)
 {
 	int size  = ring->desc_num * sizeof(struct hclge_desc);
 
-	ring->desc = dma_alloc_coherent(cmq_ring_to_dev(ring), size,
-					&ring->desc_dma_addr, GFP_KERNEL);
+	ring->desc = dma_alloc_coherent(&ring->pdev->dev,
+					size, &ring->desc_dma_addr, GFP_KERNEL);
 	if (!ring->desc)
 		return -ENOMEM;
 
 	return 0;
 }
 
-static void hclge_free_cmd_desc(struct hclge_cmq_ring *ring)
+static void hclge_free_cmd_desc(struct hclge_comm_cmq_ring *ring)
 {
 	int size  = ring->desc_num * sizeof(struct hclge_desc);
 
 	if (ring->desc) {
-		dma_free_coherent(cmq_ring_to_dev(ring), size,
+		dma_free_coherent(&ring->pdev->dev, size,
 				  ring->desc, ring->desc_dma_addr);
 		ring->desc = NULL;
 	}
@@ -59,12 +37,13 @@ static void hclge_free_cmd_desc(struct hclge_cmq_ring *ring)
 static int hclge_alloc_cmd_queue(struct hclge_dev *hdev, int ring_type)
 {
 	struct hclge_hw *hw = &hdev->hw;
-	struct hclge_cmq_ring *ring =
-		(ring_type == HCLGE_TYPE_CSQ) ? &hw->cmq.csq : &hw->cmq.crq;
+	struct hclge_comm_cmq_ring *ring =
+		(ring_type == HCLGE_TYPE_CSQ) ? &hw->hw.cmq.csq :
+						&hw->hw.cmq.crq;
 	int ret;
 
 	ring->ring_type = ring_type;
-	ring->dev = hdev;
+	ring->pdev = hdev->pdev;
 
 	ret = hclge_alloc_cmd_desc(ring);
 	if (ret) {
@@ -96,11 +75,10 @@ void hclge_cmd_setup_basic_desc(struct hclge_desc *desc,
 		desc->flag |= cpu_to_le16(HCLGE_CMD_FLAG_WR);
 }
 
-static void hclge_cmd_config_regs(struct hclge_cmq_ring *ring)
+static void hclge_cmd_config_regs(struct hclge_hw *hw,
+				  struct hclge_comm_cmq_ring *ring)
 {
 	dma_addr_t dma = ring->desc_dma_addr;
-	struct hclge_dev *hdev = ring->dev;
-	struct hclge_hw *hw = &hdev->hw;
 	u32 reg_val;
 
 	if (ring->ring_type == HCLGE_TYPE_CSQ) {
@@ -128,176 +106,8 @@ static void hclge_cmd_config_regs(struct hclge_cmq_ring *ring)
 
 static void hclge_cmd_init_regs(struct hclge_hw *hw)
 {
-	hclge_cmd_config_regs(&hw->cmq.csq);
-	hclge_cmd_config_regs(&hw->cmq.crq);
-}
-
-static int hclge_cmd_csq_clean(struct hclge_hw *hw)
-{
-	struct hclge_dev *hdev = container_of(hw, struct hclge_dev, hw);
-	struct hclge_cmq_ring *csq = &hw->cmq.csq;
-	u32 head;
-	int clean;
-
-	head = hclge_read_dev(hw, HCLGE_NIC_CSQ_HEAD_REG);
-	rmb(); /* Make sure head is ready before touch any data */
-
-	if (!is_valid_csq_clean_head(csq, head)) {
-		dev_warn(&hdev->pdev->dev, "wrong cmd head (%u, %d-%d)\n", head,
-			 csq->next_to_use, csq->next_to_clean);
-		dev_warn(&hdev->pdev->dev,
-			 "Disabling any further commands to IMP firmware\n");
-		set_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state);
-		dev_warn(&hdev->pdev->dev,
-			 "IMP firmware watchdog reset soon expected!\n");
-		return -EIO;
-	}
-
-	clean = (head - csq->next_to_clean + csq->desc_num) % csq->desc_num;
-	csq->next_to_clean = head;
-	return clean;
-}
-
-static int hclge_cmd_csq_done(struct hclge_hw *hw)
-{
-	u32 head = hclge_read_dev(hw, HCLGE_NIC_CSQ_HEAD_REG);
-	return head == hw->cmq.csq.next_to_use;
-}
-
-static bool hclge_is_special_opcode(u16 opcode)
-{
-	/* these commands have several descriptors,
-	 * and use the first one to save opcode and return value
-	 */
-	static const u16 spec_opcode[] = {
-		HCLGE_OPC_STATS_64_BIT,
-		HCLGE_OPC_STATS_32_BIT,
-		HCLGE_OPC_STATS_MAC,
-		HCLGE_OPC_STATS_MAC_ALL,
-		HCLGE_OPC_QUERY_32_BIT_REG,
-		HCLGE_OPC_QUERY_64_BIT_REG,
-		HCLGE_QUERY_CLEAR_MPF_RAS_INT,
-		HCLGE_QUERY_CLEAR_PF_RAS_INT,
-		HCLGE_QUERY_CLEAR_ALL_MPF_MSIX_INT,
-		HCLGE_QUERY_CLEAR_ALL_PF_MSIX_INT,
-		HCLGE_QUERY_ALL_ERR_INFO
-	};
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(spec_opcode); i++) {
-		if (spec_opcode[i] == opcode)
-			return true;
-	}
-
-	return false;
-}
-
-struct errcode {
-	u32 imp_errcode;
-	int common_errno;
-};
-
-static void hclge_cmd_copy_desc(struct hclge_hw *hw, struct hclge_desc *desc,
-				int num)
-{
-	struct hclge_desc *desc_to_use;
-	int handle = 0;
-
-	while (handle < num) {
-		desc_to_use = &hw->cmq.csq.desc[hw->cmq.csq.next_to_use];
-		*desc_to_use = desc[handle];
-		(hw->cmq.csq.next_to_use)++;
-		if (hw->cmq.csq.next_to_use >= hw->cmq.csq.desc_num)
-			hw->cmq.csq.next_to_use = 0;
-		handle++;
-	}
-}
-
-static int hclge_cmd_convert_err_code(u16 desc_ret)
-{
-	struct errcode hclge_cmd_errcode[] = {
-		{HCLGE_CMD_EXEC_SUCCESS, 0},
-		{HCLGE_CMD_NO_AUTH, -EPERM},
-		{HCLGE_CMD_NOT_SUPPORTED, -EOPNOTSUPP},
-		{HCLGE_CMD_QUEUE_FULL, -EXFULL},
-		{HCLGE_CMD_NEXT_ERR, -ENOSR},
-		{HCLGE_CMD_UNEXE_ERR, -ENOTBLK},
-		{HCLGE_CMD_PARA_ERR, -EINVAL},
-		{HCLGE_CMD_RESULT_ERR, -ERANGE},
-		{HCLGE_CMD_TIMEOUT, -ETIME},
-		{HCLGE_CMD_HILINK_ERR, -ENOLINK},
-		{HCLGE_CMD_QUEUE_ILLEGAL, -ENXIO},
-		{HCLGE_CMD_INVALID, -EBADR},
-	};
-	u32 errcode_count = ARRAY_SIZE(hclge_cmd_errcode);
-	u32 i;
-
-	for (i = 0; i < errcode_count; i++)
-		if (hclge_cmd_errcode[i].imp_errcode == desc_ret)
-			return hclge_cmd_errcode[i].common_errno;
-
-	return -EIO;
-}
-
-static int hclge_cmd_check_retval(struct hclge_hw *hw, struct hclge_desc *desc,
-				  int num, int ntc)
-{
-	u16 opcode, desc_ret;
-	int handle;
-
-	opcode = le16_to_cpu(desc[0].opcode);
-	for (handle = 0; handle < num; handle++) {
-		desc[handle] = hw->cmq.csq.desc[ntc];
-		ntc++;
-		if (ntc >= hw->cmq.csq.desc_num)
-			ntc = 0;
-	}
-	if (likely(!hclge_is_special_opcode(opcode)))
-		desc_ret = le16_to_cpu(desc[num - 1].retval);
-	else
-		desc_ret = le16_to_cpu(desc[0].retval);
-
-	hw->cmq.last_status = desc_ret;
-
-	return hclge_cmd_convert_err_code(desc_ret);
-}
-
-static int hclge_cmd_check_result(struct hclge_hw *hw, struct hclge_desc *desc,
-				  int num, int ntc)
-{
-	struct hclge_dev *hdev = container_of(hw, struct hclge_dev, hw);
-	bool is_completed = false;
-	u32 timeout = 0;
-	int handle, ret;
-
-	/**
-	 * If the command is sync, wait for the firmware to write back,
-	 * if multi descriptors to be sent, use the first one to check
-	 */
-	if (HCLGE_SEND_SYNC(le16_to_cpu(desc->flag))) {
-		do {
-			if (hclge_cmd_csq_done(hw)) {
-				is_completed = true;
-				break;
-			}
-			udelay(1);
-			timeout++;
-		} while (timeout < hw->cmq.tx_timeout);
-	}
-
-	if (!is_completed)
-		ret = -EBADE;
-	else
-		ret = hclge_cmd_check_retval(hw, desc, num, ntc);
-
-	/* Clean the command send queue */
-	handle = hclge_cmd_csq_clean(hw);
-	if (handle < 0)
-		ret = handle;
-	else if (handle != num)
-		dev_warn(&hdev->pdev->dev,
-			 "cleaned %d, need to clean %d\n", handle, num);
-	return ret;
+	hclge_cmd_config_regs(hw, &hw->hw.cmq.csq);
+	hclge_cmd_config_regs(hw, &hw->hw.cmq.crq);
 }
 
 /**
@@ -311,43 +121,7 @@ static int hclge_cmd_check_result(struct hclge_hw *hw, struct hclge_desc *desc,
  **/
 int hclge_cmd_send(struct hclge_hw *hw, struct hclge_desc *desc, int num)
 {
-	struct hclge_dev *hdev = container_of(hw, struct hclge_dev, hw);
-	struct hclge_cmq_ring *csq = &hw->cmq.csq;
-	int ret;
-	int ntc;
-
-	spin_lock_bh(&hw->cmq.csq.lock);
-
-	if (test_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state)) {
-		spin_unlock_bh(&hw->cmq.csq.lock);
-		return -EBUSY;
-	}
-
-	if (num > hclge_ring_space(&hw->cmq.csq)) {
-		/* If CMDQ ring is full, SW HEAD and HW HEAD may be different,
-		 * need update the SW HEAD pointer csq->next_to_clean
-		 */
-		csq->next_to_clean = hclge_read_dev(hw, HCLGE_NIC_CSQ_HEAD_REG);
-		spin_unlock_bh(&hw->cmq.csq.lock);
-		return -EBUSY;
-	}
-
-	/**
-	 * Record the location of desc in the ring for this time
-	 * which will be use for hardware to write back
-	 */
-	ntc = hw->cmq.csq.next_to_use;
-
-	hclge_cmd_copy_desc(hw, desc, num);
-
-	/* Write to hardware */
-	hclge_write_dev(hw, HCLGE_NIC_CSQ_TAIL_REG, hw->cmq.csq.next_to_use);
-
-	ret = hclge_cmd_check_result(hw, desc, num, ntc);
-
-	spin_unlock_bh(&hw->cmq.csq.lock);
-
-	return ret;
+	return hclge_comm_cmd_send(&hw->hw, desc, num, true);
 }
 
 static void hclge_set_default_capability(struct hclge_dev *hdev)
@@ -401,7 +175,7 @@ static __le32 hclge_build_api_caps(void)
 	return cpu_to_le32(api_caps);
 }
 
-static enum hclge_cmd_status
+static enum hclge_comm_cmd_status
 hclge_cmd_query_version_and_capability(struct hclge_dev *hdev)
 {
 	struct hnae3_ae_dev *ae_dev = pci_get_drvdata(hdev->pdev);
@@ -433,18 +207,22 @@ hclge_cmd_query_version_and_capability(struct hclge_dev *hdev)
 
 int hclge_cmd_queue_init(struct hclge_dev *hdev)
 {
+	struct hclge_comm_cmq *cmdq = &hdev->hw.hw.cmq;
 	int ret;
 
 	/* Setup the lock for command queue */
-	spin_lock_init(&hdev->hw.cmq.csq.lock);
-	spin_lock_init(&hdev->hw.cmq.crq.lock);
+	spin_lock_init(&cmdq->csq.lock);
+	spin_lock_init(&cmdq->crq.lock);
+
+	cmdq->csq.pdev = hdev->pdev;
+	cmdq->crq.pdev = hdev->pdev;
 
 	/* Setup the queue entries for use cmd queue */
-	hdev->hw.cmq.csq.desc_num = HCLGE_NIC_CMQ_DESC_NUM;
-	hdev->hw.cmq.crq.desc_num = HCLGE_NIC_CMQ_DESC_NUM;
+	cmdq->csq.desc_num = HCLGE_NIC_CMQ_DESC_NUM;
+	cmdq->crq.desc_num = HCLGE_NIC_CMQ_DESC_NUM;
 
 	/* Setup Tx write back timeout */
-	hdev->hw.cmq.tx_timeout = HCLGE_CMDQ_TX_TIMEOUT;
+	cmdq->tx_timeout = HCLGE_CMDQ_TX_TIMEOUT;
 
 	/* Setup queue rings */
 	ret = hclge_alloc_cmd_queue(hdev, HCLGE_TYPE_CSQ);
@@ -463,7 +241,7 @@ int hclge_cmd_queue_init(struct hclge_dev *hdev)
 
 	return 0;
 err_csq:
-	hclge_free_cmd_desc(&hdev->hw.cmq.csq);
+	hclge_free_cmd_desc(&hdev->hw.hw.cmq.csq);
 	return ret;
 }
 
@@ -491,22 +269,23 @@ static int hclge_firmware_compat_config(struct hclge_dev *hdev, bool en)
 
 int hclge_cmd_init(struct hclge_dev *hdev)
 {
+	struct hclge_comm_cmq *cmdq = &hdev->hw.hw.cmq;
 	int ret;
 
-	spin_lock_bh(&hdev->hw.cmq.csq.lock);
-	spin_lock(&hdev->hw.cmq.crq.lock);
+	spin_lock_bh(&cmdq->csq.lock);
+	spin_lock(&cmdq->crq.lock);
 
-	hdev->hw.cmq.csq.next_to_clean = 0;
-	hdev->hw.cmq.csq.next_to_use = 0;
-	hdev->hw.cmq.crq.next_to_clean = 0;
-	hdev->hw.cmq.crq.next_to_use = 0;
+	cmdq->csq.next_to_clean = 0;
+	cmdq->csq.next_to_use = 0;
+	cmdq->crq.next_to_clean = 0;
+	cmdq->crq.next_to_use = 0;
 
 	hclge_cmd_init_regs(&hdev->hw);
 
-	spin_unlock(&hdev->hw.cmq.crq.lock);
-	spin_unlock_bh(&hdev->hw.cmq.csq.lock);
+	spin_unlock(&cmdq->crq.lock);
+	spin_unlock_bh(&cmdq->csq.lock);
 
-	clear_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state);
+	clear_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hdev->hw.hw.comm_state);
 
 	/* Check if there is new reset pending, because the higher level
 	 * reset may happen when lower level reset is being processed.
@@ -550,7 +329,7 @@ int hclge_cmd_init(struct hclge_dev *hdev)
 	return 0;
 
 err_cmd_init:
-	set_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state);
+	set_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hdev->hw.hw.comm_state);
 
 	return ret;
 }
@@ -571,19 +350,23 @@ static void hclge_cmd_uninit_regs(struct hclge_hw *hw)
 
 void hclge_cmd_uninit(struct hclge_dev *hdev)
 {
+	struct hclge_comm_cmq *cmdq = &hdev->hw.hw.cmq;
+
+	cmdq->csq.pdev = hdev->pdev;
+
 	hclge_firmware_compat_config(hdev, false);
 
-	set_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state);
+	set_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hdev->hw.hw.comm_state);
 	/* wait to ensure that the firmware completes the possible left
 	 * over commands.
 	 */
 	msleep(HCLGE_CMDQ_CLEAR_WAIT_TIME);
-	spin_lock_bh(&hdev->hw.cmq.csq.lock);
-	spin_lock(&hdev->hw.cmq.crq.lock);
+	spin_lock_bh(&cmdq->csq.lock);
+	spin_lock(&cmdq->crq.lock);
 	hclge_cmd_uninit_regs(&hdev->hw);
-	spin_unlock(&hdev->hw.cmq.crq.lock);
-	spin_unlock_bh(&hdev->hw.cmq.csq.lock);
+	spin_unlock(&cmdq->crq.lock);
+	spin_unlock_bh(&cmdq->csq.lock);
 
-	hclge_free_cmd_desc(&hdev->hw.cmq.csq);
-	hclge_free_cmd_desc(&hdev->hw.cmq.crq);
+	hclge_free_cmd_desc(&cmdq->csq);
+	hclge_free_cmd_desc(&cmdq->crq);
 }
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
index e07709ef239df..303a7592bb18d 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
@@ -11,63 +11,18 @@
 
 #define HCLGE_CMDQ_TX_TIMEOUT		30000
 #define HCLGE_CMDQ_CLEAR_WAIT_TIME	200
-#define HCLGE_DESC_DATA_LEN		6
 
 struct hclge_dev;
 
 #define HCLGE_CMDQ_RX_INVLD_B		0
 #define HCLGE_CMDQ_RX_OUTVLD_B		1
 
-struct hclge_cmq_ring {
-	dma_addr_t desc_dma_addr;
-	struct hclge_desc *desc;
-	struct hclge_dev *dev;
-	u32 head;
-	u32 tail;
-
-	u16 buf_size;
-	u16 desc_num;
-	int next_to_use;
-	int next_to_clean;
-	u8 ring_type; /* cmq ring type */
-	spinlock_t lock; /* Command queue lock */
-};
-
-enum hclge_cmd_return_status {
-	HCLGE_CMD_EXEC_SUCCESS	= 0,
-	HCLGE_CMD_NO_AUTH	= 1,
-	HCLGE_CMD_NOT_SUPPORTED	= 2,
-	HCLGE_CMD_QUEUE_FULL	= 3,
-	HCLGE_CMD_NEXT_ERR	= 4,
-	HCLGE_CMD_UNEXE_ERR	= 5,
-	HCLGE_CMD_PARA_ERR	= 6,
-	HCLGE_CMD_RESULT_ERR	= 7,
-	HCLGE_CMD_TIMEOUT	= 8,
-	HCLGE_CMD_HILINK_ERR	= 9,
-	HCLGE_CMD_QUEUE_ILLEGAL	= 10,
-	HCLGE_CMD_INVALID	= 11,
-};
-
-enum hclge_cmd_status {
-	HCLGE_STATUS_SUCCESS	= 0,
-	HCLGE_ERR_CSQ_FULL	= -1,
-	HCLGE_ERR_CSQ_TIMEOUT	= -2,
-	HCLGE_ERR_CSQ_ERROR	= -3,
-};
-
 struct hclge_misc_vector {
 	u8 __iomem *addr;
 	int vector_irq;
 	char name[HNAE3_INT_NAME_LEN];
 };
 
-struct hclge_cmq {
-	struct hclge_cmq_ring csq;
-	struct hclge_cmq_ring crq;
-	u16 tx_timeout;
-	enum hclge_cmd_status last_status;
-};
-
 #define HCLGE_CMD_FLAG_IN	BIT(0)
 #define HCLGE_CMD_FLAG_OUT	BIT(1)
 #define HCLGE_CMD_FLAG_NEXT	BIT(2)
@@ -1236,25 +1191,6 @@ struct hclge_caps_bit_map {
 };
 
 int hclge_cmd_init(struct hclge_dev *hdev);
-static inline void hclge_write_reg(void __iomem *base, u32 reg, u32 value)
-{
-	writel(value, base + reg);
-}
-
-#define hclge_write_dev(a, reg, value) \
-	hclge_write_reg((a)->io_base, reg, value)
-#define hclge_read_dev(a, reg) \
-	hclge_read_reg((a)->io_base, reg)
-
-static inline u32 hclge_read_reg(u8 __iomem *base, u32 reg)
-{
-	u8 __iomem *reg_addr = READ_ONCE(base);
-
-	return readl(reg_addr + reg);
-}
-
-#define HCLGE_SEND_SYNC(flag) \
-	((flag) & HCLGE_CMD_FLAG_NO_INTR)
 
 struct hclge_hw;
 int hclge_cmd_send(struct hclge_hw *hw, struct hclge_desc *desc, int num);
@@ -1262,10 +1198,10 @@ void hclge_cmd_setup_basic_desc(struct hclge_desc *desc,
 				enum hclge_opcode_type opcode, bool is_read);
 void hclge_cmd_reuse_desc(struct hclge_desc *desc, bool is_read);
 
-enum hclge_cmd_status hclge_cmd_mdio_write(struct hclge_hw *hw,
-					   struct hclge_desc *desc);
-enum hclge_cmd_status hclge_cmd_mdio_read(struct hclge_hw *hw,
-					  struct hclge_desc *desc);
+enum hclge_comm_cmd_status hclge_cmd_mdio_write(struct hclge_hw *hw,
+						struct hclge_desc *desc);
+enum hclge_comm_cmd_status hclge_cmd_mdio_read(struct hclge_hw *hw,
+					       struct hclge_desc *desc);
 
 void hclge_cmd_uninit(struct hclge_dev *hdev);
 int hclge_cmd_queue_init(struct hclge_dev *hdev);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 93e55c6c4cf5e..a744ebb72b137 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -24,6 +24,7 @@
 #include "hclge_err.h"
 #include "hnae3.h"
 #include "hclge_devlink.h"
+#include "hclge_comm_cmd.h"
 
 #define HCLGE_NAME			"hclge"
 
@@ -1677,11 +1678,11 @@ static int hclge_alloc_tqps(struct hclge_dev *hdev)
 		 * HCLGE_TQP_MAX_SIZE_DEV_V2
 		 */
 		if (i < HCLGE_TQP_MAX_SIZE_DEV_V2)
-			tqp->q.io_base = hdev->hw.io_base +
+			tqp->q.io_base = hdev->hw.hw.io_base +
 					 HCLGE_TQP_REG_OFFSET +
 					 i * HCLGE_TQP_REG_SIZE;
 		else
-			tqp->q.io_base = hdev->hw.io_base +
+			tqp->q.io_base = hdev->hw.hw.io_base +
 					 HCLGE_TQP_REG_OFFSET +
 					 HCLGE_TQP_EXT_REG_OFFSET +
 					 (i - HCLGE_TQP_MAX_SIZE_DEV_V2) *
@@ -1825,7 +1826,7 @@ static int hclge_vport_setup(struct hclge_vport *vport, u16 num_tqps)
 	nic->pdev = hdev->pdev;
 	nic->ae_algo = &ae_algo;
 	nic->numa_node_mask = hdev->numa_node_mask;
-	nic->kinfo.io_base = hdev->hw.io_base;
+	nic->kinfo.io_base = hdev->hw.hw.io_base;
 
 	ret = hclge_knic_setup(vport, num_tqps,
 			       hdev->num_tx_desc, hdev->num_rx_desc);
@@ -2511,8 +2512,8 @@ static int hclge_init_roce_base_info(struct hclge_vport *vport)
 	roce->rinfo.base_vector = hdev->num_nic_msi;
 
 	roce->rinfo.netdev = nic->kinfo.netdev;
-	roce->rinfo.roce_io_base = hdev->hw.io_base;
-	roce->rinfo.roce_mem_base = hdev->hw.mem_base;
+	roce->rinfo.roce_io_base = hdev->hw.hw.io_base;
+	roce->rinfo.roce_mem_base = hdev->hw.hw.mem_base;
 
 	roce->pdev = nic->pdev;
 	roce->ae_algo = nic->ae_algo;
@@ -3366,7 +3367,7 @@ static u32 hclge_check_event_cause(struct hclge_dev *hdev, u32 *clearval)
 	if (BIT(HCLGE_VECTOR0_IMPRESET_INT_B) & msix_src_reg) {
 		dev_info(&hdev->pdev->dev, "IMP reset interrupt\n");
 		set_bit(HNAE3_IMP_RESET, &hdev->reset_pending);
-		set_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state);
+		set_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hdev->hw.hw.comm_state);
 		*clearval = BIT(HCLGE_VECTOR0_IMPRESET_INT_B);
 		hdev->rst_stats.imp_rst_cnt++;
 		return HCLGE_VECTOR0_EVENT_RST;
@@ -3374,7 +3375,7 @@ static u32 hclge_check_event_cause(struct hclge_dev *hdev, u32 *clearval)
 
 	if (BIT(HCLGE_VECTOR0_GLOBALRESET_INT_B) & msix_src_reg) {
 		dev_info(&hdev->pdev->dev, "global reset interrupt\n");
-		set_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state);
+		set_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hdev->hw.hw.comm_state);
 		set_bit(HNAE3_GLOBAL_RESET, &hdev->reset_pending);
 		*clearval = BIT(HCLGE_VECTOR0_GLOBALRESET_INT_B);
 		hdev->rst_stats.global_rst_cnt++;
@@ -3513,7 +3514,7 @@ static void hclge_get_misc_vector(struct hclge_dev *hdev)
 
 	vector->vector_irq = pci_irq_vector(hdev->pdev, 0);
 
-	vector->addr = hdev->hw.io_base + HCLGE_MISC_VECTOR_REG_BASE;
+	vector->addr = hdev->hw.hw.io_base + HCLGE_MISC_VECTOR_REG_BASE;
 	hdev->vector_status[0] = 0;
 
 	hdev->num_msi_left -= 1;
@@ -3697,7 +3698,7 @@ static int hclge_set_all_vf_rst(struct hclge_dev *hdev, bool reset)
 static void hclge_mailbox_service_task(struct hclge_dev *hdev)
 {
 	if (!test_and_clear_bit(HCLGE_STATE_MBX_SERVICE_SCHED, &hdev->state) ||
-	    test_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state) ||
+	    test_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hdev->hw.hw.comm_state) ||
 	    test_and_set_bit(HCLGE_STATE_MBX_HANDLING, &hdev->state))
 		return;
 
@@ -3944,7 +3945,7 @@ static int hclge_reset_prepare_wait(struct hclge_dev *hdev)
 		 * any mailbox handling or command to firmware is only valid
 		 * after hclge_cmd_init is called.
 		 */
-		set_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state);
+		set_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hdev->hw.hw.comm_state);
 		hdev->rst_stats.pf_rst_cnt++;
 		break;
 	case HNAE3_FLR_RESET:
@@ -4498,11 +4499,11 @@ static void hclge_get_vector_info(struct hclge_dev *hdev, u16 idx,
 
 	/* need an extend offset to config vector >= 64 */
 	if (idx - 1 < HCLGE_PF_MAX_VECTOR_NUM_DEV_V2)
-		vector_info->io_addr = hdev->hw.io_base +
+		vector_info->io_addr = hdev->hw.hw.io_base +
 				HCLGE_VECTOR_REG_BASE +
 				(idx - 1) * HCLGE_VECTOR_REG_OFFSET;
 	else
-		vector_info->io_addr = hdev->hw.io_base +
+		vector_info->io_addr = hdev->hw.hw.io_base +
 				HCLGE_VECTOR_EXT_REG_BASE +
 				(idx - 1) / HCLGE_PF_MAX_VECTOR_NUM_DEV_V2 *
 				HCLGE_VECTOR_REG_OFFSET_H +
@@ -5140,7 +5141,7 @@ int hclge_bind_ring_with_vector(struct hclge_vport *vport,
 	struct hclge_desc desc;
 	struct hclge_ctrl_vector_chain_cmd *req =
 		(struct hclge_ctrl_vector_chain_cmd *)desc.data;
-	enum hclge_cmd_status status;
+	enum hclge_comm_cmd_status status;
 	enum hclge_opcode_type op;
 	u16 tqp_type_and_id;
 	int i;
@@ -7666,7 +7667,7 @@ static bool hclge_get_cmdq_stat(struct hnae3_handle *handle)
 	struct hclge_vport *vport = hclge_get_vport(handle);
 	struct hclge_dev *hdev = vport->back;
 
-	return test_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state);
+	return test_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hdev->hw.hw.comm_state);
 }
 
 static bool hclge_ae_dev_resetting(struct hnae3_handle *handle)
@@ -8864,7 +8865,7 @@ int hclge_rm_mc_addr_common(struct hclge_vport *vport,
 	char format_mac_addr[HNAE3_FORMAT_MAC_ADDR_LEN];
 	struct hclge_dev *hdev = vport->back;
 	struct hclge_mac_vlan_tbl_entry_cmd req;
-	enum hclge_cmd_status status;
+	enum hclge_comm_cmd_status status;
 	struct hclge_desc desc[3];
 
 	/* mac addr check */
@@ -11450,10 +11451,11 @@ static int hclge_dev_mem_map(struct hclge_dev *hdev)
 	if (!(pci_select_bars(pdev, IORESOURCE_MEM) & BIT(HCLGE_MEM_BAR)))
 		return 0;
 
-	hw->mem_base = devm_ioremap_wc(&pdev->dev,
-				       pci_resource_start(pdev, HCLGE_MEM_BAR),
-				       pci_resource_len(pdev, HCLGE_MEM_BAR));
-	if (!hw->mem_base) {
+	hw->hw.mem_base =
+		devm_ioremap_wc(&pdev->dev,
+				pci_resource_start(pdev, HCLGE_MEM_BAR),
+				pci_resource_len(pdev, HCLGE_MEM_BAR));
+	if (!hw->hw.mem_base) {
 		dev_err(&pdev->dev, "failed to map device memory\n");
 		return -EFAULT;
 	}
@@ -11492,8 +11494,8 @@ static int hclge_pci_init(struct hclge_dev *hdev)
 
 	pci_set_master(pdev);
 	hw = &hdev->hw;
-	hw->io_base = pcim_iomap(pdev, 2, 0);
-	if (!hw->io_base) {
+	hw->hw.io_base = pcim_iomap(pdev, 2, 0);
+	if (!hw->hw.io_base) {
 		dev_err(&pdev->dev, "Can't map configuration register space\n");
 		ret = -ENOMEM;
 		goto err_clr_master;
@@ -11508,7 +11510,7 @@ static int hclge_pci_init(struct hclge_dev *hdev)
 	return 0;
 
 err_unmap_io_base:
-	pcim_iounmap(pdev, hdev->hw.io_base);
+	pcim_iounmap(pdev, hdev->hw.hw.io_base);
 err_clr_master:
 	pci_clear_master(pdev);
 	pci_release_regions(pdev);
@@ -11522,10 +11524,10 @@ static void hclge_pci_uninit(struct hclge_dev *hdev)
 {
 	struct pci_dev *pdev = hdev->pdev;
 
-	if (hdev->hw.mem_base)
-		devm_iounmap(&pdev->dev, hdev->hw.mem_base);
+	if (hdev->hw.hw.mem_base)
+		devm_iounmap(&pdev->dev, hdev->hw.hw.mem_base);
 
-	pcim_iounmap(pdev, hdev->hw.io_base);
+	pcim_iounmap(pdev, hdev->hw.hw.io_base);
 	pci_free_irq_vectors(pdev);
 	pci_clear_master(pdev);
 	pci_release_mem_regions(pdev);
@@ -11586,7 +11588,7 @@ static void hclge_reset_prepare_general(struct hnae3_ae_dev *ae_dev,
 
 	/* disable misc vector before reset done */
 	hclge_enable_vector(&hdev->misc_vector, false);
-	set_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state);
+	set_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hdev->hw.hw.comm_state);
 
 	if (hdev->reset_type == HNAE3_FLR_RESET)
 		hdev->rst_stats.flr_rst_cnt++;
@@ -11877,7 +11879,7 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev)
 err_devlink_uninit:
 	hclge_devlink_uninit(hdev);
 err_pci_uninit:
-	pcim_iounmap(pdev, hdev->hw.io_base);
+	pcim_iounmap(pdev, hdev->hw.hw.io_base);
 	pci_clear_master(pdev);
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index 6870ccc9d9eac..4e52a7d96483c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -228,7 +228,6 @@ enum HCLGE_DEV_STATE {
 	HCLGE_STATE_MBX_HANDLING,
 	HCLGE_STATE_ERR_SERVICE_SCHED,
 	HCLGE_STATE_STATISTICS_UPDATING,
-	HCLGE_STATE_CMD_DISABLE,
 	HCLGE_STATE_LINK_UPDATING,
 	HCLGE_STATE_RST_FAIL,
 	HCLGE_STATE_FD_TBL_CHANGED,
@@ -297,11 +296,9 @@ struct hclge_mac {
 };
 
 struct hclge_hw {
-	void __iomem *io_base;
-	void __iomem *mem_base;
+	struct hclge_comm_hw hw;
 	struct hclge_mac mac;
 	int num_vec;
-	struct hclge_cmq cmq;
 };
 
 /* TQP stats */
@@ -616,6 +613,11 @@ struct key_info {
 #define MAX_FD_FILTER_NUM	4096
 #define HCLGE_ARFS_EXPIRE_INTERVAL	5UL
 
+#define hclge_read_dev(a, reg) \
+	hclge_comm_read_reg((a)->hw.io_base, reg)
+#define hclge_write_dev(a, reg, value) \
+	hclge_comm_write_reg((a)->hw.io_base, reg, value)
+
 enum HCLGE_FD_ACTIVE_RULE_TYPE {
 	HCLGE_FD_RULE_NONE,
 	HCLGE_FD_ARFS_ACTIVE,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
index 1bd3d6056163b..77c432ab7856c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
@@ -33,7 +33,7 @@ static int hclge_gen_resp_to_vf(struct hclge_vport *vport,
 {
 	struct hclge_mbx_pf_to_vf_cmd *resp_pf_to_vf;
 	struct hclge_dev *hdev = vport->back;
-	enum hclge_cmd_status status;
+	enum hclge_comm_cmd_status status;
 	struct hclge_desc desc;
 	u16 resp;
 
@@ -92,7 +92,7 @@ static int hclge_send_mbx_msg(struct hclge_vport *vport, u8 *msg, u16 msg_len,
 {
 	struct hclge_mbx_pf_to_vf_cmd *resp_pf_to_vf;
 	struct hclge_dev *hdev = vport->back;
-	enum hclge_cmd_status status;
+	enum hclge_comm_cmd_status status;
 	struct hclge_desc desc;
 
 	if (msg_len > HCLGE_MBX_MAX_MSG_SIZE) {
@@ -745,7 +745,7 @@ static bool hclge_cmd_crq_empty(struct hclge_hw *hw)
 {
 	u32 tail = hclge_read_dev(hw, HCLGE_NIC_CRQ_TAIL_REG);
 
-	return tail == hw->cmq.crq.next_to_use;
+	return tail == hw->hw.cmq.crq.next_to_use;
 }
 
 static void hclge_handle_ncsi_error(struct hclge_dev *hdev)
@@ -1045,7 +1045,7 @@ static void hclge_mbx_request_handling(struct hclge_mbx_ops_param *param)
 
 void hclge_mbx_handler(struct hclge_dev *hdev)
 {
-	struct hclge_cmq_ring *crq = &hdev->hw.cmq.crq;
+	struct hclge_comm_cmq_ring *crq = &hdev->hw.hw.cmq.crq;
 	struct hclge_respond_to_vf_msg resp_msg;
 	struct hclge_mbx_vf_to_pf_cmd *req;
 	struct hclge_mbx_ops_param param;
@@ -1055,7 +1055,8 @@ void hclge_mbx_handler(struct hclge_dev *hdev)
 	param.resp_msg = &resp_msg;
 	/* handle all the mailbox requests in the queue */
 	while (!hclge_cmd_crq_empty(&hdev->hw)) {
-		if (test_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state)) {
+		if (test_bit(HCLGE_COMM_STATE_CMD_DISABLE,
+			     &hdev->hw.hw.comm_state)) {
 			dev_warn(&hdev->pdev->dev,
 				 "command queue needs re-initializing\n");
 			return;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index 1231c34f09494..63d2be4349e3e 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -47,7 +47,7 @@ static int hclge_mdio_write(struct mii_bus *bus, int phyid, int regnum,
 	struct hclge_desc desc;
 	int ret;
 
-	if (test_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state))
+	if (test_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hdev->hw.hw.comm_state))
 		return 0;
 
 	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MDIO_CONFIG, false);
@@ -85,7 +85,7 @@ static int hclge_mdio_read(struct mii_bus *bus, int phyid, int regnum)
 	struct hclge_desc desc;
 	int ret;
 
-	if (test_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state))
+	if (test_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hdev->hw.hw.comm_state))
 		return 0;
 
 	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MDIO_CONFIG, true);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c
index dd0750f6daa6c..0f06f95b09bc2 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c
@@ -464,7 +464,7 @@ static int hclge_ptp_create_clock(struct hclge_dev *hdev)
 	}
 
 	spin_lock_init(&ptp->lock);
-	ptp->io_base = hdev->hw.io_base + HCLGE_PTP_REG_OFFSET;
+	ptp->io_base = hdev->hw.hw.io_base + HCLGE_PTP_REG_OFFSET;
 	ptp->ts_cfg.rx_filter = HWTSTAMP_FILTER_NONE;
 	ptp->ts_cfg.tx_type = HWTSTAMP_TX_OFF;
 	hdev->ptp = ptp;
-- 
2.43.0

[PATCH 5.15 126/168] net: hns3: change type of numa_node_mask as nodemask_t

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peiyang Wang <wangpeiyang1@huawei.com>

[ Upstream commit 6639a7b953212ac51aa4baa7d7fb855bf736cf56 ]

It provides nodemask_t to describe the numa node mask in kernel. To
improve transportability, change the type of numa_node_mask as nodemask_t.

Fixes: 38caee9d3ee8 ("net: hns3: Add support of the HNAE3 framework")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hnae3.h               | 2 +-
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c   | 6 ++++--
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h   | 2 +-
 drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 7 ++++---
 drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 2 +-
 5 files changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index 8dfa372df8e77..f362a2fac3c29 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -829,7 +829,7 @@ struct hnae3_handle {
 		struct hnae3_roce_private_info rinfo;
 	};
 
-	u32 numa_node_mask;	/* for multi-chip support */
+	nodemask_t numa_node_mask; /* for multi-chip support */
 
 	enum hnae3_port_base_vlan_state port_base_vlan_state;
 
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index a744ebb72b137..a0a64441199c5 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -1825,7 +1825,8 @@ static int hclge_vport_setup(struct hclge_vport *vport, u16 num_tqps)
 
 	nic->pdev = hdev->pdev;
 	nic->ae_algo = &ae_algo;
-	nic->numa_node_mask = hdev->numa_node_mask;
+	bitmap_copy(nic->numa_node_mask.bits, hdev->numa_node_mask.bits,
+		    MAX_NUMNODES);
 	nic->kinfo.io_base = hdev->hw.hw.io_base;
 
 	ret = hclge_knic_setup(vport, num_tqps,
@@ -2517,7 +2518,8 @@ static int hclge_init_roce_base_info(struct hclge_vport *vport)
 
 	roce->pdev = nic->pdev;
 	roce->ae_algo = nic->ae_algo;
-	roce->numa_node_mask = nic->numa_node_mask;
+	bitmap_copy(roce->numa_node_mask.bits, nic->numa_node_mask.bits,
+		    MAX_NUMNODES);
 
 	return 0;
 }
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index 4e52a7d96483c..1ef5b4c8625a7 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -863,7 +863,7 @@ struct hclge_dev {
 
 	u16 fdir_pf_filter_count; /* Num of guaranteed filters for this PF */
 	u16 num_alloc_vport;		/* Num vports this driver supports */
-	u32 numa_node_mask;
+	nodemask_t numa_node_mask;
 	u16 rx_buf_len;
 	u16 num_tx_desc;		/* desc num of per tx queue */
 	u16 num_rx_desc;		/* desc num of per rx queue */
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index bd8468c2d9a68..9afb44d738c4e 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -537,7 +537,8 @@ static int hclgevf_set_handle_info(struct hclgevf_dev *hdev)
 
 	nic->ae_algo = &ae_algovf;
 	nic->pdev = hdev->pdev;
-	nic->numa_node_mask = hdev->numa_node_mask;
+	bitmap_copy(nic->numa_node_mask.bits, hdev->numa_node_mask.bits,
+		    MAX_NUMNODES);
 	nic->flags |= HNAE3_SUPPORT_VF;
 	nic->kinfo.io_base = hdev->hw.io_base;
 
@@ -2588,8 +2589,8 @@ static int hclgevf_init_roce_base_info(struct hclgevf_dev *hdev)
 
 	roce->pdev = nic->pdev;
 	roce->ae_algo = nic->ae_algo;
-	roce->numa_node_mask = nic->numa_node_mask;
-
+	bitmap_copy(roce->numa_node_mask.bits, nic->numa_node_mask.bits,
+		    MAX_NUMNODES);
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
index 5c7538ca36a76..2b216ac96914c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
@@ -298,7 +298,7 @@ struct hclgevf_dev {
 	u16 rss_size_max;	/* HW defined max RSS task queue */
 
 	u16 num_alloc_vport;	/* num vports this driver supports */
-	u32 numa_node_mask;
+	nodemask_t numa_node_mask;
 	u16 rx_buf_len;
 	u16 num_tx_desc;	/* desc num of per tx queue */
 	u16 num_rx_desc;	/* desc num of per rx queue */
-- 
2.43.0

[PATCH 5.15 127/168] net: hns3: use appropriate barrier function after setting a bit value

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peiyang Wang <wangpeiyang1@huawei.com>

[ Upstream commit 094c281228529d333458208fd02fcac3b139d93b ]

There is a memory barrier in followed case. When set the port down,
hclgevf_set_timmer will set DOWN in state. Meanwhile, the service task has
different behaviour based on whether the state is DOWN. Thus, to make sure
service task see DOWN, use smp_mb__after_atomic after calling set_bit().

          CPU0                        CPU1
========================== ===================================
hclgevf_set_timer_task()    hclgevf_periodic_service_task()
  set_bit(DOWN,state)         test_bit(DOWN,state)

pf also has this issue.

Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main")
Fixes: 1c6dfe6fc6f7 ("net: hns3: remove mailbox and reset work in hclge_main")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c   | 3 +--
 drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index a0a64441199c5..4b0027a41f3cd 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -8156,8 +8156,7 @@ static void hclge_set_timer_task(struct hnae3_handle *handle, bool enable)
 		/* Set the DOWN flag here to disable link updating */
 		set_bit(HCLGE_STATE_DOWN, &hdev->state);
 
-		/* flush memory to make sure DOWN is seen by service task */
-		smp_mb__before_atomic();
+		smp_mb__after_atomic(); /* flush memory to make sure DOWN is seen by service task */
 		hclge_flush_link_update(hdev);
 	}
 }
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 9afb44d738c4e..a41e04796b0b6 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -2722,8 +2722,7 @@ static void hclgevf_set_timer_task(struct hnae3_handle *handle, bool enable)
 	} else {
 		set_bit(HCLGEVF_STATE_DOWN, &hdev->state);
 
-		/* flush memory to make sure DOWN is seen by service task */
-		smp_mb__before_atomic();
+		smp_mb__after_atomic(); /* flush memory to make sure DOWN is seen by service task */
 		hclgevf_flush_link_update(hdev);
 	}
 }
-- 
2.43.0

[PATCH 5.15 128/168] net: hns3: split function hclge_init_vlan_config()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit b60f9d2ec479966383c7f2cdf3b1a3a66c25f212 ]

Currently the function hclge_init_vlan_config() is a bit long.
Split it to several small functions, to simplify code and
improve code readability.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: f5db7a3b65c8 ("net: hns3: fix port vlan filter not disabled issue")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../hisilicon/hns3/hns3pf/hclge_main.c        | 97 +++++++++++--------
 1 file changed, 55 insertions(+), 42 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 4b0027a41f3cd..6a346165d5881 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -10102,67 +10102,80 @@ static int hclge_set_vlan_protocol_type(struct hclge_dev *hdev)
 	return status;
 }
 
-static int hclge_init_vlan_config(struct hclge_dev *hdev)
+static int hclge_init_vlan_filter(struct hclge_dev *hdev)
 {
-#define HCLGE_DEF_VLAN_TYPE		0x8100
-
-	struct hnae3_handle *handle = &hdev->vport[0].nic;
 	struct hclge_vport *vport;
 	int ret;
 	int i;
 
-	if (hdev->ae_dev->dev_version >= HNAE3_DEVICE_VERSION_V2) {
-		/* for revision 0x21, vf vlan filter is per function */
-		for (i = 0; i < hdev->num_alloc_vport; i++) {
-			vport = &hdev->vport[i];
-			ret = hclge_set_vlan_filter_ctrl(hdev,
-							 HCLGE_FILTER_TYPE_VF,
-							 HCLGE_FILTER_FE_EGRESS,
-							 true,
-							 vport->vport_id);
-			if (ret)
-				return ret;
-			vport->cur_vlan_fltr_en = true;
-		}
+	if (hdev->ae_dev->dev_version < HNAE3_DEVICE_VERSION_V2)
+		return hclge_set_vlan_filter_ctrl(hdev, HCLGE_FILTER_TYPE_VF,
+						  HCLGE_FILTER_FE_EGRESS_V1_B,
+						  true, 0);
 
-		ret = hclge_set_vlan_filter_ctrl(hdev, HCLGE_FILTER_TYPE_PORT,
-						 HCLGE_FILTER_FE_INGRESS, true,
-						 0);
-		if (ret)
-			return ret;
-	} else {
+	/* for revision 0x21, vf vlan filter is per function */
+	for (i = 0; i < hdev->num_alloc_vport; i++) {
+		vport = &hdev->vport[i];
 		ret = hclge_set_vlan_filter_ctrl(hdev, HCLGE_FILTER_TYPE_VF,
-						 HCLGE_FILTER_FE_EGRESS_V1_B,
-						 true, 0);
+						 HCLGE_FILTER_FE_EGRESS, true,
+						 vport->vport_id);
 		if (ret)
 			return ret;
+		vport->cur_vlan_fltr_en = true;
 	}
 
-	hdev->vlan_type_cfg.rx_in_fst_vlan_type = HCLGE_DEF_VLAN_TYPE;
-	hdev->vlan_type_cfg.rx_in_sec_vlan_type = HCLGE_DEF_VLAN_TYPE;
-	hdev->vlan_type_cfg.rx_ot_fst_vlan_type = HCLGE_DEF_VLAN_TYPE;
-	hdev->vlan_type_cfg.rx_ot_sec_vlan_type = HCLGE_DEF_VLAN_TYPE;
-	hdev->vlan_type_cfg.tx_ot_vlan_type = HCLGE_DEF_VLAN_TYPE;
-	hdev->vlan_type_cfg.tx_in_vlan_type = HCLGE_DEF_VLAN_TYPE;
+	return hclge_set_vlan_filter_ctrl(hdev, HCLGE_FILTER_TYPE_PORT,
+					  HCLGE_FILTER_FE_INGRESS, true, 0);
+}
 
-	ret = hclge_set_vlan_protocol_type(hdev);
-	if (ret)
-		return ret;
+static int hclge_init_vlan_type(struct hclge_dev *hdev)
+{
+	hdev->vlan_type_cfg.rx_in_fst_vlan_type = ETH_P_8021Q;
+	hdev->vlan_type_cfg.rx_in_sec_vlan_type = ETH_P_8021Q;
+	hdev->vlan_type_cfg.rx_ot_fst_vlan_type = ETH_P_8021Q;
+	hdev->vlan_type_cfg.rx_ot_sec_vlan_type = ETH_P_8021Q;
+	hdev->vlan_type_cfg.tx_ot_vlan_type = ETH_P_8021Q;
+	hdev->vlan_type_cfg.tx_in_vlan_type = ETH_P_8021Q;
 
-	for (i = 0; i < hdev->num_alloc_vport; i++) {
-		u16 vlan_tag;
-		u8 qos;
+	return hclge_set_vlan_protocol_type(hdev);
+}
 
+static int hclge_init_vport_vlan_offload(struct hclge_dev *hdev)
+{
+	struct hclge_port_base_vlan_config *cfg;
+	struct hclge_vport *vport;
+	int ret;
+	int i;
+
+	for (i = 0; i < hdev->num_alloc_vport; i++) {
 		vport = &hdev->vport[i];
-		vlan_tag = vport->port_base_vlan_cfg.vlan_info.vlan_tag;
-		qos = vport->port_base_vlan_cfg.vlan_info.qos;
+		cfg = &vport->port_base_vlan_cfg;
 
-		ret = hclge_vlan_offload_cfg(vport,
-					     vport->port_base_vlan_cfg.state,
-					     vlan_tag, qos);
+		ret = hclge_vlan_offload_cfg(vport, cfg->state,
+					     cfg->vlan_info.vlan_tag,
+					     cfg->vlan_info.qos);
 		if (ret)
 			return ret;
 	}
+	return 0;
+}
+
+static int hclge_init_vlan_config(struct hclge_dev *hdev)
+{
+	struct hnae3_handle *handle = &hdev->vport[0].nic;
+	int ret;
+
+	ret = hclge_init_vlan_filter(hdev);
+	if (ret)
+		return ret;
+
+	ret = hclge_init_vlan_type(hdev);
+	if (ret)
+		return ret;
+
+	ret = hclge_init_vport_vlan_offload(hdev);
+	if (ret)
+		return ret;
 
 	return hclge_set_vlan_filter(handle, htons(ETH_P_8021Q), 0, false);
 }
-- 
2.43.0

[PATCH 5.15 129/168] net: hns3: fix port vlan filter not disabled issue

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit f5db7a3b65c84d723ca5e2bb6e83115180ab6336 ]

According to hardware limitation, for device support modify
VLAN filter state but not support bypass port VLAN filter,
it should always disable the port VLAN filter. but the driver
enables port VLAN filter when initializing, if there is no
VLAN(except VLAN 0) id added, the driver will disable it
in service task. In most time, it works fine. But there is
a time window before the service task shceduled and net device
being registered. So if user adds VLAN at this time, the driver
will not update the VLAN filter state,  and the port VLAN filter
remains enabled.

To fix the problem, if support modify VLAN filter state but not
support bypass port VLAN filter, set the port vlan filter to "off".

Fixes: 184cd221a863 ("net: hns3: disable port VLAN filter when support function level VLAN filter control")
Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 6a346165d5881..d58048b056781 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -10105,6 +10105,7 @@ static int hclge_set_vlan_protocol_type(struct hclge_dev *hdev)
 static int hclge_init_vlan_filter(struct hclge_dev *hdev)
 {
 	struct hclge_vport *vport;
+	bool enable = true;
 	int ret;
 	int i;
 
@@ -10124,8 +10125,12 @@ static int hclge_init_vlan_filter(struct hclge_dev *hdev)
 		vport->cur_vlan_fltr_en = true;
 	}
 
+	if (test_bit(HNAE3_DEV_SUPPORT_VLAN_FLTR_MDF_B, hdev->ae_dev->caps) &&
+	    !test_bit(HNAE3_DEV_SUPPORT_PORT_VLAN_BYPASS_B, hdev->ae_dev->caps))
+		enable = false;
+
 	return hclge_set_vlan_filter_ctrl(hdev, HCLGE_FILTER_TYPE_PORT,
-					  HCLGE_FILTER_FE_INGRESS, true, 0);
+					  HCLGE_FILTER_FE_INGRESS, enable, 0);
 }
 
 static int hclge_init_vlan_type(struct hclge_dev *hdev)
-- 
2.43.0

[PATCH 5.15 130/168] drm/meson: dw-hdmi: power up phy on device init

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 04703bfd7f99c016a823c74712b97f8b5590ce87 ]

The phy is not in a useful state right after init. It will become useful,
including for auxiliary function such as CEC or ARC, after the first mode
is set. This is a problem on systems where the display is using another
interface like DSI or CVBS.

This change refactor the init and mode change callback to power up the PHY
on init and leave only what is necessary for mode changes in the related
function. This is enough to fix CEC operation when HDMI display is not
enabled.

Fixes: 3f68be7d8e96 ("drm/meson: Add support for HDMI encoder and DW-HDMI bridge + PHY")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240426160256.3089978-2-jbrunet@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426160256.3089978-2-jbrunet@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/meson/meson_dw_hdmi.c | 51 +++++++++------------------
 1 file changed, 17 insertions(+), 34 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 5cd2b2ebbbd33..f8dd22d6e6c62 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -384,26 +384,6 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
 	     drm_mode_is_420_also(display, mode)))
 		mode_is_420 = true;
 
-	/* Enable clocks */
-	regmap_update_bits(priv->hhi, HHI_HDMI_CLK_CNTL, 0xffff, 0x100);
-
-	/* Bring HDMITX MEM output of power down */
-	regmap_update_bits(priv->hhi, HHI_MEM_PD_REG0, 0xff << 8, 0);
-
-	/* Bring out of reset */
-	dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_SW_RESET,  0);
-
-	/* Enable internal pixclk, tmds_clk, spdif_clk, i2s_clk, cecclk */
-	dw_hdmi_top_write_bits(dw_hdmi, HDMITX_TOP_CLK_CNTL,
-			       0x3, 0x3);
-
-	/* Enable cec_clk and hdcp22_tmdsclk_en */
-	dw_hdmi_top_write_bits(dw_hdmi, HDMITX_TOP_CLK_CNTL,
-			       0x3 << 4, 0x3 << 4);
-
-	/* Enable normal output to PHY */
-	dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_BIST_CNTL, BIT(12));
-
 	/* TMDS pattern setup */
 	if (mode->clock > 340000 && !mode_is_420) {
 		dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01,
@@ -425,20 +405,6 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
 	/* Setup PHY parameters */
 	meson_hdmi_phy_setup_mode(dw_hdmi, mode, mode_is_420);
 
-	/* Setup PHY */
-	regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1,
-			   0xffff << 16, 0x0390 << 16);
-
-	/* BIT_INVERT */
-	if (dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
-	    dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-gxm-dw-hdmi") ||
-	    dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-g12a-dw-hdmi"))
-		regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1,
-				   BIT(17), 0);
-	else
-		regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1,
-				   BIT(17), BIT(17));
-
 	/* Disable clock, fifo, fifo_wr */
 	regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, 0xf, 0);
 
@@ -656,6 +622,23 @@ static void meson_dw_hdmi_init(struct meson_dw_hdmi *meson_dw_hdmi)
 	meson_dw_hdmi->data->top_write(meson_dw_hdmi,
 				       HDMITX_TOP_CLK_CNTL, 0xff);
 
+	/* Enable normal output to PHY */
+	meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_BIST_CNTL, BIT(12));
+
+	/* Setup PHY */
+	regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1,
+			   0xffff << 16, 0x0390 << 16);
+
+	/* BIT_INVERT */
+	if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
+	    dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxm-dw-hdmi") ||
+	    dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-g12a-dw-hdmi"))
+		regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1,
+				   BIT(17), 0);
+	else
+		regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1,
+				   BIT(17), BIT(17));
+
 	/* Enable HDMI-TX Interrupt */
 	meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_INTR_STAT_CLR,
 				       HDMITX_TOP_INTR_CORE);
-- 
2.43.0

[PATCH 5.15 131/168] drm/meson: dw-hdmi: add bandgap setting for g12

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 08001033121dd92b8297a5b7333636b466c30f13 ]

When no mode is set, the utility pin appears to be grounded. No signal
is getting through.

This is problematic because ARC and eARC use this line and may do so even
if no display mode is set.

This change enable the bandgap setting on g12 chip, which fix the problem
with the utility pin. This is done by restoring init values on PHY init and
disable.

Fixes: 3b7c1237a72a ("drm/meson: Add G12A support for the DW-HDMI Glue")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240426160256.3089978-3-jbrunet@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426160256.3089978-3-jbrunet@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/meson/meson_dw_hdmi.c | 43 ++++++++++++++++-----------
 1 file changed, 26 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index f8dd22d6e6c62..2c8e978eb9ab9 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -105,6 +105,8 @@
 #define HHI_HDMI_CLK_CNTL	0x1cc /* 0x73 */
 #define HHI_HDMI_PHY_CNTL0	0x3a0 /* 0xe8 */
 #define HHI_HDMI_PHY_CNTL1	0x3a4 /* 0xe9 */
+#define  PHY_CNTL1_INIT		0x03900000
+#define  PHY_INVERT		BIT(17)
 #define HHI_HDMI_PHY_CNTL2	0x3a8 /* 0xea */
 #define HHI_HDMI_PHY_CNTL3	0x3ac /* 0xeb */
 #define HHI_HDMI_PHY_CNTL4	0x3b0 /* 0xec */
@@ -129,6 +131,8 @@ struct meson_dw_hdmi_data {
 				    unsigned int addr);
 	void		(*dwc_write)(struct meson_dw_hdmi *dw_hdmi,
 				     unsigned int addr, unsigned int data);
+	u32 cntl0_init;
+	u32 cntl1_init;
 };
 
 struct meson_dw_hdmi {
@@ -458,7 +462,9 @@ static void dw_hdmi_phy_disable(struct dw_hdmi *hdmi,
 
 	DRM_DEBUG_DRIVER("\n");
 
-	regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL0, 0);
+	/* Fallback to init mode */
+	regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL1, dw_hdmi->data->cntl1_init);
+	regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL0, dw_hdmi->data->cntl0_init);
 }
 
 static enum drm_connector_status dw_hdmi_read_hpd(struct dw_hdmi *hdmi,
@@ -576,11 +582,22 @@ static const struct regmap_config meson_dw_hdmi_regmap_config = {
 	.fast_io = true,
 };
 
-static const struct meson_dw_hdmi_data meson_dw_hdmi_gx_data = {
+static const struct meson_dw_hdmi_data meson_dw_hdmi_gxbb_data = {
 	.top_read = dw_hdmi_top_read,
 	.top_write = dw_hdmi_top_write,
 	.dwc_read = dw_hdmi_dwc_read,
 	.dwc_write = dw_hdmi_dwc_write,
+	.cntl0_init = 0x0,
+	.cntl1_init = PHY_CNTL1_INIT | PHY_INVERT,
+};
+
+static const struct meson_dw_hdmi_data meson_dw_hdmi_gxl_data = {
+	.top_read = dw_hdmi_top_read,
+	.top_write = dw_hdmi_top_write,
+	.dwc_read = dw_hdmi_dwc_read,
+	.dwc_write = dw_hdmi_dwc_write,
+	.cntl0_init = 0x0,
+	.cntl1_init = PHY_CNTL1_INIT,
 };
 
 static const struct meson_dw_hdmi_data meson_dw_hdmi_g12a_data = {
@@ -588,6 +605,8 @@ static const struct meson_dw_hdmi_data meson_dw_hdmi_g12a_data = {
 	.top_write = dw_hdmi_g12a_top_write,
 	.dwc_read = dw_hdmi_g12a_dwc_read,
 	.dwc_write = dw_hdmi_g12a_dwc_write,
+	.cntl0_init = 0x000b4242, /* Bandgap */
+	.cntl1_init = PHY_CNTL1_INIT,
 };
 
 static void meson_dw_hdmi_init(struct meson_dw_hdmi *meson_dw_hdmi)
@@ -626,18 +645,8 @@ static void meson_dw_hdmi_init(struct meson_dw_hdmi *meson_dw_hdmi)
 	meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_BIST_CNTL, BIT(12));
 
 	/* Setup PHY */
-	regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1,
-			   0xffff << 16, 0x0390 << 16);
-
-	/* BIT_INVERT */
-	if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
-	    dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxm-dw-hdmi") ||
-	    dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-g12a-dw-hdmi"))
-		regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1,
-				   BIT(17), 0);
-	else
-		regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1,
-				   BIT(17), BIT(17));
+	regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL1, meson_dw_hdmi->data->cntl1_init);
+	regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL0, meson_dw_hdmi->data->cntl0_init);
 
 	/* Enable HDMI-TX Interrupt */
 	meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_INTR_STAT_CLR,
@@ -866,11 +875,11 @@ static const struct dev_pm_ops meson_dw_hdmi_pm_ops = {
 
 static const struct of_device_id meson_dw_hdmi_of_table[] = {
 	{ .compatible = "amlogic,meson-gxbb-dw-hdmi",
-	  .data = &meson_dw_hdmi_gx_data },
+	  .data = &meson_dw_hdmi_gxbb_data },
 	{ .compatible = "amlogic,meson-gxl-dw-hdmi",
-	  .data = &meson_dw_hdmi_gx_data },
+	  .data = &meson_dw_hdmi_gxl_data },
 	{ .compatible = "amlogic,meson-gxm-dw-hdmi",
-	  .data = &meson_dw_hdmi_gx_data },
+	  .data = &meson_dw_hdmi_gxl_data },
 	{ .compatible = "amlogic,meson-g12a-dw-hdmi",
 	  .data = &meson_dw_hdmi_g12a_data },
 	{ }
-- 
2.43.0

[PATCH 5.15 132/168] drm/connector: Add \n to message about demoting connector force-probes

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 6897204ea3df808d342c8e4613135728bc538bcd ]

The debug print clearly lacks a \n at the end. Add it.

Fixes: 8f86c82aba8b ("drm/connector: demote connector force-probes for non-master clients")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502153234.1.I2052f01c8d209d9ae9c300b87c6e4f60bd3cc99e@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_connector.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index cfe163103cfd7..1140292820bb1 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -2460,7 +2460,7 @@ int drm_mode_getconnector(struct drm_device *dev, void *data,
 						     dev->mode_config.max_width,
 						     dev->mode_config.max_height);
 		else
-			drm_dbg_kms(dev, "User-space requested a forced probe on [CONNECTOR:%d:%s] but is not the DRM master, demoting to read-only probe",
+			drm_dbg_kms(dev, "User-space requested a forced probe on [CONNECTOR:%d:%s] but is not the DRM master, demoting to read-only probe\n",
 				    connector->base.id, connector->name);
 	}
 
-- 
2.43.0

[PATCH 5.15 133/168] drm/amd/display: Atom Integrated System Info v2_2 for DCN35

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gabe Teeger <gabe.teeger@amd.com>

[ Upstream commit 9a35d205f466501dcfe5625ca313d944d0ac2d60 ]

New request from KMD/VBIOS in order to support new UMA carveout
model. This fixes a null dereference from accessing
Ctx->dc_bios->integrated_info while it was NULL.

DAL parses through the BIOS and extracts the necessary
integrated_info but was missing a case for the new BIOS
version 2.3.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
index 228f098e5d88f..6bc8c6bee411e 100644
--- a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
+++ b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
@@ -2303,6 +2303,7 @@ static enum bp_result construct_integrated_info(
 				result = get_integrated_info_v2_1(bp, info);
 				break;
 			case 2:
+			case 3:
 				result = get_integrated_info_v2_2(bp, info);
 				break;
 			default:
-- 
2.43.0

[PATCH 5.15 134/168] Revert "Revert "ACPI: CPPC: Use access_width over bit_width for system memory accesses""

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Easwar Hariharan <eahariha@linux.microsoft.com>

This reverts commit b54c4632946ae42f2b39ed38abd909bbf78cbcc2 which was a
revert of a backport of commit 2f4a4d63a193be6fd530d180bb13c3592052904c
upstream to 5.15.y.

Cc: Jarred White <jarredwhite@linux.microsoft.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Vanshidhar Konda <vanshikonda@os.amperecomputing.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/cppc_acpi.c | 27 ++++++++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
index 7cc9183c8dc8e..408b1fda5702d 100644
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -161,6 +161,13 @@ show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, nominal_freq);
 show_cppc_data(cppc_get_perf_ctrs, cppc_perf_fb_ctrs, reference_perf);
 show_cppc_data(cppc_get_perf_ctrs, cppc_perf_fb_ctrs, wraparound_time);
 
+/* Check for valid access_width, otherwise, fallback to using bit_width */
+#define GET_BIT_WIDTH(reg) ((reg)->access_width ? (8 << ((reg)->access_width - 1)) : (reg)->bit_width)
+
+/* Shift and apply the mask for CPC reads/writes */
+#define MASK_VAL(reg, val) ((val) >> ((reg)->bit_offset & 			\
+					GENMASK(((reg)->bit_width), 0)))
+
 static ssize_t show_feedback_ctrs(struct kobject *kobj,
 		struct kobj_attribute *attr, char *buf)
 {
@@ -762,8 +769,10 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr)
 			} else if (gas_t->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
 				if (gas_t->address) {
 					void __iomem *addr;
+					size_t access_width;
 
-					addr = ioremap(gas_t->address, gas_t->bit_width/8);
+					access_width = GET_BIT_WIDTH(gas_t) / 8;
+					addr = ioremap(gas_t->address, access_width);
 					if (!addr)
 						goto out_free;
 					cpc_ptr->cpc_regs[i-2].sys_mem_vaddr = addr;
@@ -936,6 +945,7 @@ static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val)
 {
 	int ret_val = 0;
 	void __iomem *vaddr = NULL;
+	int size;
 	int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
 	struct cpc_reg *reg = &reg_res->cpc_entry.reg;
 
@@ -955,7 +965,9 @@ static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val)
 		return acpi_os_read_memory((acpi_physical_address)reg->address,
 				val, reg->bit_width);
 
-	switch (reg->bit_width) {
+	size = GET_BIT_WIDTH(reg);
+
+	switch (size) {
 	case 8:
 		*val = readb_relaxed(vaddr);
 		break;
@@ -974,12 +986,16 @@ static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val)
 		ret_val = -EFAULT;
 	}
 
+	if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
+		*val = MASK_VAL(reg, *val);
+
 	return ret_val;
 }
 
 static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val)
 {
 	int ret_val = 0;
+	int size;
 	void __iomem *vaddr = NULL;
 	int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
 	struct cpc_reg *reg = &reg_res->cpc_entry.reg;
@@ -994,7 +1010,12 @@ static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val)
 		return acpi_os_write_memory((acpi_physical_address)reg->address,
 				val, reg->bit_width);
 
-	switch (reg->bit_width) {
+	size = GET_BIT_WIDTH(reg);
+
+	if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
+		val = MASK_VAL(reg, val);
+
+	switch (size) {
 	case 8:
 		writeb_relaxed(val, vaddr);
 		break;
-- 
2.43.0

[PATCH 5.15 135/168] ACPI: CPPC: Fix bit_offset shift in MASK_VAL() macro

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jarred White <jarredwhite@linux.microsoft.com>

commit 05d92ee782eeb7b939bdd0189e6efcab9195bf95 upstream

Commit 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for
system memory accesses") neglected to properly wrap the bit_offset shift
when it comes to applying the mask. This may cause incorrect values to be
read and may cause the cpufreq module not be loaded.

[   11.059751] cpu_capacity: CPU0 missing/invalid highest performance.
[   11.066005] cpu_capacity: partial information: fallback to 1024 for all CPUs

Also, corrected the bitmask generation in GENMASK (extra bit being added).

Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Jarred White <jarredwhite@linux.microsoft.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Reviewed-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/cppc_acpi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
index 408b1fda5702d..6aa456cda0ed9 100644
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -165,8 +165,8 @@ show_cppc_data(cppc_get_perf_ctrs, cppc_perf_fb_ctrs, wraparound_time);
 #define GET_BIT_WIDTH(reg) ((reg)->access_width ? (8 << ((reg)->access_width - 1)) : (reg)->bit_width)
 
 /* Shift and apply the mask for CPC reads/writes */
-#define MASK_VAL(reg, val) ((val) >> ((reg)->bit_offset & 			\
-					GENMASK(((reg)->bit_width), 0)))
+#define MASK_VAL(reg, val) (((val) >> (reg)->bit_offset) & 			\
+					GENMASK(((reg)->bit_width) - 1, 0))
 
 static ssize_t show_feedback_ctrs(struct kobject *kobj,
 		struct kobj_attribute *attr, char *buf)
-- 
2.43.0

[PATCH 5.15 136/168] ACPI: CPPC: Fix access width used for PCC registers

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vanshidhar Konda <vanshikonda@os.amperecomputing.com>

commit f489c948028b69cea235d9c0de1cc10eeb26a172 upstream

commit 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system
memory accesses") modified cpc_read()/cpc_write() to use access_width to
read CPC registers.

However, for PCC registers the access width field in the ACPI register
macro specifies the PCC subspace ID.  For non-zero PCC subspace ID it is
incorrectly treated as access width. This causes errors when reading
from PCC registers in the CPPC driver.

For PCC registers, base the size of read/write on the bit width field.
The debug message in cpc_read()/cpc_write() is updated to print relevant
information for the address space type used to read the register.

Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com>
Tested-by: Jarred White <jarredwhite@linux.microsoft.com>
Reviewed-by: Jarred White <jarredwhite@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ eahariha: Backport to v5.15 by dropping SystemIO bits as commit
  a2c8f92bea5f is not present ]
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/cppc_acpi.c | 48 ++++++++++++++++++++++++++++++----------
 1 file changed, 36 insertions(+), 12 deletions(-)

diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
index 6aa456cda0ed9..6dcce036adb9c 100644
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -955,17 +955,24 @@ static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val)
 	}
 
 	*val = 0;
-	if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0)
+	size = GET_BIT_WIDTH(reg);
+
+	if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0) {
+		/*
+		 * For registers in PCC space, the register size is determined
+		 * by the bit width field; the access size is used to indicate
+		 * the PCC subspace id.
+		 */
+		size = reg->bit_width;
 		vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id);
+	}
 	else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
 		vaddr = reg_res->sys_mem_vaddr;
 	else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE)
 		return cpc_read_ffh(cpu, reg, val);
 	else
 		return acpi_os_read_memory((acpi_physical_address)reg->address,
-				val, reg->bit_width);
-
-	size = GET_BIT_WIDTH(reg);
+				val, size);
 
 	switch (size) {
 	case 8:
@@ -981,8 +988,13 @@ static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val)
 		*val = readq_relaxed(vaddr);
 		break;
 	default:
-		pr_debug("Error: Cannot read %u bit width from PCC for ss: %d\n",
-			 reg->bit_width, pcc_ss_id);
+		if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
+			pr_debug("Error: Cannot read %u bit width from system memory: 0x%llx\n",
+				size, reg->address);
+		} else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) {
+			pr_debug("Error: Cannot read %u bit width from PCC for ss: %d\n",
+				size, pcc_ss_id);
+		}
 		ret_val = -EFAULT;
 	}
 
@@ -1000,17 +1012,24 @@ static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val)
 	int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
 	struct cpc_reg *reg = &reg_res->cpc_entry.reg;
 
-	if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0)
+	size = GET_BIT_WIDTH(reg);
+
+	if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0) {
+		/*
+		 * For registers in PCC space, the register size is determined
+		 * by the bit width field; the access size is used to indicate
+		 * the PCC subspace id.
+		 */
+		size = reg->bit_width;
 		vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id);
+	}
 	else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
 		vaddr = reg_res->sys_mem_vaddr;
 	else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE)
 		return cpc_write_ffh(cpu, reg, val);
 	else
 		return acpi_os_write_memory((acpi_physical_address)reg->address,
-				val, reg->bit_width);
-
-	size = GET_BIT_WIDTH(reg);
+				val, size);
 
 	if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
 		val = MASK_VAL(reg, val);
@@ -1029,8 +1048,13 @@ static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val)
 		writeq_relaxed(val, vaddr);
 		break;
 	default:
-		pr_debug("Error: Cannot write %u bit width to PCC for ss: %d\n",
-			 reg->bit_width, pcc_ss_id);
+		if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
+			pr_debug("Error: Cannot write %u bit width to system memory: 0x%llx\n",
+				size, reg->address);
+		} else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) {
+			pr_debug("Error: Cannot write %u bit width to PCC for ss: %d\n",
+				size, pcc_ss_id);
+		}
 		ret_val = -EFAULT;
 		break;
 	}
-- 
2.43.0

[PATCH 5.15 137/168] btrfs: fix kvcalloc() arguments order in btrfs_ioctl_send()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Antipov <dmantipov@yandex.ru>

commit 6ff09b6b8c2fb6b3edda4ffaa173153a40653067 upstream.

When compiling with gcc version 14.0.0 20231220 (experimental)
and W=1, I've noticed the following warning:

fs/btrfs/send.c: In function 'btrfs_ioctl_send':
fs/btrfs/send.c:8208:44: warning: 'kvcalloc' sizes specified with 'sizeof'
in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
 8208 |         sctx->clone_roots = kvcalloc(sizeof(*sctx->clone_roots),
      |                                            ^

Since 'n' and 'size' arguments of 'kvcalloc()' are multiplied to
calculate the final size, their actual order doesn't affect the result
and so this is not a bug. But it's still worth to fix it.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/send.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -7612,8 +7612,8 @@ long btrfs_ioctl_send(struct file *mnt_f
 	sctx->waiting_dir_moves = RB_ROOT;
 	sctx->orphan_dirs = RB_ROOT;
 
-	sctx->clone_roots = kvcalloc(sizeof(*sctx->clone_roots),
-				     arg->clone_sources_count + 1,
+	sctx->clone_roots = kvcalloc(arg->clone_sources_count + 1,
+				     sizeof(*sctx->clone_roots),
 				     GFP_KERNEL);
 	if (!sctx->clone_roots) {
 		ret = -ENOMEM;

[PATCH 5.15 138/168] firewire: nosy: ensure user_length is taken into account when fetching packet contents

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thanassis Avgerinos <thanassis.avgerinos@gmail.com>

commit 38762a0763c10c24a4915feee722d7aa6e73eb98 upstream.

Ensure that packet_buffer_get respects the user_length provided. If
the length of the head packet exceeds the user_length, packet_buffer_get
will now return 0 to signify to the user that no data were read
and a larger buffer size is required. Helps prevent user space overflows.

Signed-off-by: Thanassis Avgerinos <thanassis.avgerinos@gmail.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/firewire/nosy.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/firewire/nosy.c
+++ b/drivers/firewire/nosy.c
@@ -148,10 +148,12 @@ packet_buffer_get(struct client *client,
 	if (atomic_read(&buffer->size) == 0)
 		return -ENODEV;
 
-	/* FIXME: Check length <= user_length. */
+	length = buffer->head->length;
+
+	if (length > user_length)
+		return 0;
 
 	end = buffer->data + buffer->capacity;
-	length = buffer->head->length;
 
 	if (&buffer->head->data[length] < end) {
 		if (copy_to_user(data, buffer->head->data, length))

[PATCH 5.15 139/168] Reapply "drm/qxl: simplify qxl_fence_wait"

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 3628e0383dd349f02f882e612ab6184e4bb3dc10 upstream.

This reverts commit 07ed11afb68d94eadd4ffc082b97c2331307c5ea.

Stephen Rostedt reports:
 "I went to run my tests on my VMs and the tests hung on boot up.
  Unfortunately, the most I ever got out was:

  [   93.607888] Testing event system initcall: OK
  [   93.667730] Running tests on all trace events:
  [   93.669757] Testing all events: OK
  [   95.631064] ------------[ cut here ]------------
  Timed out after 60 seconds"

and further debugging points to a possible circular locking dependency
between the console_owner locking and the worker pool locking.

Reverting the commit allows Steve's VM to boot to completion again.

[ This may obviously result in the "[TTM] Buffer eviction failed"
  messages again, which was the reason for that original revert. But at
  this point this seems preferable to a non-booting system... ]

Reported-and-bisected-by: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/all/20240502081641.457aa25f@gandalf.local.home/
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Alex Constantino <dreaming.about.electric.sheep@gmail.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Timo Lindfors <timo.lindfors@iki.fi>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/qxl/qxl_release.c |   50 +++-----------------------------------
 include/linux/dma-fence.h         |    7 -----
 2 files changed, 5 insertions(+), 52 deletions(-)

--- a/drivers/gpu/drm/qxl/qxl_release.c
+++ b/drivers/gpu/drm/qxl/qxl_release.c
@@ -58,56 +58,16 @@ static long qxl_fence_wait(struct dma_fe
 			   signed long timeout)
 {
 	struct qxl_device *qdev;
-	struct qxl_release *release;
-	int count = 0, sc = 0;
-	bool have_drawable_releases;
 	unsigned long cur, end = jiffies + timeout;
 
 	qdev = container_of(fence->lock, struct qxl_device, release_lock);
-	release = container_of(fence, struct qxl_release, base);
-	have_drawable_releases = release->type == QXL_RELEASE_DRAWABLE;
 
-retry:
-	sc++;
-
-	if (dma_fence_is_signaled(fence))
-		goto signaled;
-
-	qxl_io_notify_oom(qdev);
-
-	for (count = 0; count < 11; count++) {
-		if (!qxl_queue_garbage_collect(qdev, true))
-			break;
-
-		if (dma_fence_is_signaled(fence))
-			goto signaled;
-	}
-
-	if (dma_fence_is_signaled(fence))
-		goto signaled;
-
-	if (have_drawable_releases || sc < 4) {
-		if (sc > 2)
-			/* back off */
-			usleep_range(500, 1000);
-
-		if (time_after(jiffies, end))
-			return 0;
-
-		if (have_drawable_releases && sc > 300) {
-			DMA_FENCE_WARN(fence,
-				       "failed to wait on release %llu after spincount %d\n",
-				       fence->context & ~0xf0000000, sc);
-			goto signaled;
-		}
-		goto retry;
-	}
-	/*
-	 * yeah, original sync_obj_wait gave up after 3 spins when
-	 * have_drawable_releases is not set.
-	 */
+	if (!wait_event_timeout(qdev->release_event,
+				(dma_fence_is_signaled(fence) ||
+				 (qxl_io_notify_oom(qdev), 0)),
+				timeout))
+		return 0;
 
-signaled:
 	cur = jiffies;
 	if (time_after(cur, end))
 		return 0;
--- a/include/linux/dma-fence.h
+++ b/include/linux/dma-fence.h
@@ -631,11 +631,4 @@ u64 dma_fence_context_alloc(unsigned num
 			##args);					\
 	} while (0)
 
-#define DMA_FENCE_WARN(f, fmt, args...) \
-	do {								\
-		struct dma_fence *__ff = (f);				\
-		pr_warn("f %llu#%llu: " fmt, __ff->context, __ff->seqno,\
-			 ##args);					\
-	} while (0)
-
 #endif /* __LINUX_DMA_FENCE_H */

[PATCH 5.15 140/168] arm64: dts: qcom: Fix interrupt-map parent address cells

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rob Herring <robh@kernel.org>

commit 0ac10b291bee84b00bf9fb2afda444e77e7f88f4 upstream.

The 'interrupt-map' in several QCom SoCs is malformed. The '#address-cells'
size of the parent interrupt controller (the GIC) is not accounted for.

Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210928192210.1842377-1-robh@kernel.org
Cc: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/qcom/msm8998.dtsi |    8 ++++----
 arch/arm64/boot/dts/qcom/sdm845.dtsi  |   16 ++++++++--------
 2 files changed, 12 insertions(+), 12 deletions(-)

--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -958,10 +958,10 @@
 			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map =	<0 0 0 1 &intc 0 135 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 136 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 138 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 139 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map =	<0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 136 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 138 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 139 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1996,10 +1996,10 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_AUX_CLK>,
@@ -2101,10 +2101,10 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,

[PATCH 5.15 141/168] usb: typec: ucsi: Check for notifications after init

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian A. Ehrhardt <lk@c--e.de>

commit 808a8b9e0b87bbc72bcc1f7ddfe5d04746e7ce56 upstream.

The completion notification for the final SET_NOTIFICATION_ENABLE
command during initialization can include a connector change
notification.  However, at the time this completion notification is
processed, the ucsi struct is not ready to handle this notification.
As a result the notification is ignored and the controller
never sends an interrupt again.

Re-check CCI for a pending connector state change after
initialization is complete. Adjust the corresponding debug
message accordingly.

Fixes: 71a1fa0df2a3 ("usb: typec: ucsi: Store the notification mask")
Cc: stable@vger.kernel.org
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240320073927.1641788-3-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/ucsi/ucsi.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -854,7 +854,7 @@ void ucsi_connector_change(struct ucsi *
 	struct ucsi_connector *con = &ucsi->connector[num - 1];
 
 	if (!(ucsi->ntfy & UCSI_ENABLE_NTFY_CONNECTOR_CHANGE)) {
-		dev_dbg(ucsi->dev, "Bogus connector change event\n");
+		dev_dbg(ucsi->dev, "Early connector change event\n");
 		return;
 	}
 
@@ -1241,6 +1241,7 @@ static int ucsi_init(struct ucsi *ucsi)
 {
 	struct ucsi_connector *con;
 	u64 command, ntfy;
+	u32 cci;
 	int ret;
 	int i;
 
@@ -1292,6 +1293,13 @@ static int ucsi_init(struct ucsi *ucsi)
 		goto err_unregister;
 
 	ucsi->ntfy = ntfy;
+
+	ret = ucsi->ops->read(ucsi, UCSI_CCI, &cci, sizeof(cci));
+	if (ret)
+		return ret;
+	if (UCSI_CCI_CONNECTOR(READ_ONCE(cci)))
+		ucsi_connector_change(ucsi, cci);
+
 	return 0;
 
 err_unregister:

[PATCH 5.15 142/168] usb: typec: ucsi: Fix connector check on init

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian A. Ehrhardt <lk@c--e.de>

commit ce4c8d21054ae9396cd759fe6e8157b525616dc4 upstream.

Fix issues when initially checking for a connector change:
- Use the correct connector number not the entire CCI.
- Call ->read under the PPM lock.
- Remove a bogus READ_ONCE.

Fixes: 808a8b9e0b87 ("usb: typec: ucsi: Check for notifications after init")
Cc: stable@kernel.org
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240401210515.1902048-1-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/ucsi/ucsi.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -1294,11 +1294,13 @@ static int ucsi_init(struct ucsi *ucsi)
 
 	ucsi->ntfy = ntfy;
 
+	mutex_lock(&ucsi->ppm_lock);
 	ret = ucsi->ops->read(ucsi, UCSI_CCI, &cci, sizeof(cci));
+	mutex_unlock(&ucsi->ppm_lock);
 	if (ret)
 		return ret;
-	if (UCSI_CCI_CONNECTOR(READ_ONCE(cci)))
-		ucsi_connector_change(ucsi, cci);
+	if (UCSI_CCI_CONNECTOR(cci))
+		ucsi_connector_change(ucsi, UCSI_CCI_CONNECTOR(cci));
 
 	return 0;
 

[PATCH 5.15 143/168] usb: Fix regression caused by invalid ep0 maxpacket in virtual SuperSpeed device

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit c78c3644b772e356ca452ae733a3c4de0fb11dc8 upstream.

A virtual SuperSpeed device in the FreeBSD BVCP package
(https://bhyve.npulse.net/) presents an invalid ep0 maxpacket size of 256.
It stopped working with Linux following a recent commit because now we
check these sizes more carefully than before.

Fix this regression by using the bMaxpacketSize0 value in the device
descriptor for SuperSpeed or faster devices, even if it is invalid.  This
is a very simple-minded change; we might want to check more carefully for
values that actually make some sense (for instance, no smaller than 64).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Roger Whittaker <roger.whittaker@suse.com>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1220569
Link: https://lore.kernel.org/linux-usb/9efbd569-7059-4575-983f-0ea30df41871@suse.com/
Fixes: 59cf44575456 ("USB: core: Fix oversight in SuperSpeed initialization")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/4058ac05-237c-4db4-9ecc-5af42bdb4501@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/hub.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5049,9 +5049,10 @@ hub_port_init(struct usb_hub *hub, struc
 	}
 	if (usb_endpoint_maxp(&udev->ep0.desc) == i) {
 		;	/* Initial ep0 maxpacket guess is right */
-	} else if ((udev->speed == USB_SPEED_FULL ||
+	} else if (((udev->speed == USB_SPEED_FULL ||
 				udev->speed == USB_SPEED_HIGH) &&
-			(i == 8 || i == 16 || i == 32 || i == 64)) {
+			(i == 8 || i == 16 || i == 32 || i == 64)) ||
+			(udev->speed >= USB_SPEED_SUPER && i > 0)) {
 		/* Initial guess is wrong; use the descriptor's value */
 		if (udev->speed == USB_SPEED_FULL)
 			dev_dbg(&udev->dev, "ep0 maxpacket = %d\n", i);

[PATCH 5.15 144/168] usb: ohci: Prevent missed ohci interrupts

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <linux@roeck-us.net>

commit fe81f354841641c7f71163b84912b25c169ed8ec upstream.

Testing ohci functionality with qemu's pci-ohci emulation often results
in ohci interface stalls, resulting in hung task timeouts.

The problem is caused by lost interrupts between the emulation and the
Linux kernel code. Additional interrupts raised while the ohci interrupt
handler in Linux is running and before the handler clears the interrupt
status are not handled. The fix for a similar problem in ehci suggests
that the problem is likely caused by edge-triggered MSI interrupts. See
commit 0b60557230ad ("usb: ehci: Prevent missed ehci interrupts with
edge-triggered MSI") for details.

Ensure that the ohci interrupt code handles all pending interrupts before
returning to solve the problem.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: stable@vger.kernel.org
Fixes: 306c54d0edb6 ("usb: hcd: Try MSI interrupts on PCI devices")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://lore.kernel.org/r/20240429154010.1507366-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/ohci-hcd.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -890,6 +890,7 @@ static irqreturn_t ohci_irq (struct usb_
 	/* Check for an all 1's result which is a typical consequence
 	 * of dead, unclocked, or unplugged (CardBus...) devices
 	 */
+again:
 	if (ints == ~(u32)0) {
 		ohci->rh_state = OHCI_RH_HALTED;
 		ohci_dbg (ohci, "device removed!\n");
@@ -984,6 +985,13 @@ static irqreturn_t ohci_irq (struct usb_
 	}
 	spin_unlock(&ohci->lock);
 
+	/* repeat until all enabled interrupts are handled */
+	if (ohci->rh_state != OHCI_RH_HALTED) {
+		ints = ohci_readl(ohci, &regs->intrstatus);
+		if (ints && (ints & ohci_readl(ohci, &regs->intrenable)))
+			goto again;
+	}
+
 	return IRQ_HANDLED;
 }
 

[PATCH 5.15 145/168] usb: gadget: composite: fix OS descriptors w_value logic

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Korsgaard <peter@korsgaard.com>

commit ec6ce7075ef879b91a8710829016005dc8170f17 upstream.

The OS descriptors logic had the high/low byte of w_value inverted, causing
the extended properties to not be accessible for interface != 0.

>From the Microsoft documentation:
https://learn.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-os-1-0-descriptors-specification

OS_Desc_CompatID.doc (w_index = 0x4):

- wValue:

  High Byte = InterfaceNumber.  InterfaceNumber is set to the number of the
  interface or function that is associated with the descriptor, typically
  0x00.  Because a device can have only one extended compat ID descriptor,
  it should ignore InterfaceNumber, regardless of the value, and simply
  return the descriptor.

  Low Byte = 0.  PageNumber is used to retrieve descriptors that are larger
  than 64 KB.  The header section is 16 bytes, so PageNumber is set to 0 for
  this request.

We currently do not support >64KB compat ID descriptors, so verify that the
low byte is 0.

OS_Desc_Ext_Prop.doc (w_index = 0x5):

- wValue:

  High byte = InterfaceNumber.  The high byte of wValue is set to the number
  of the interface or function that is associated with the descriptor.

  Low byte = PageNumber.  The low byte of wValue is used to retrieve
  descriptors that are larger than 64 KB.  The header section is 10 bytes, so
  PageNumber is set to 0 for this request.

We also don't support >64KB extended properties, so verify that the low byte
is 0 and use the high byte for the interface number.

Fixes: 37a3a533429e ("usb: gadget: OS Feature Descriptors support")
Cc: stable <stable@kernel.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/20240404100635.3215340-1-peter@korsgaard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/composite.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1978,7 +1978,7 @@ unknown:
 			buf[5] = 0x01;
 			switch (ctrl->bRequestType & USB_RECIP_MASK) {
 			case USB_RECIP_DEVICE:
-				if (w_index != 0x4 || (w_value >> 8))
+				if (w_index != 0x4 || (w_value & 0xff))
 					break;
 				buf[6] = w_index;
 				/* Number of ext compat interfaces */
@@ -1994,9 +1994,9 @@ unknown:
 				}
 				break;
 			case USB_RECIP_INTERFACE:
-				if (w_index != 0x5 || (w_value >> 8))
+				if (w_index != 0x5 || (w_value & 0xff))
 					break;
-				interface = w_value & 0xFF;
+				interface = w_value >> 8;
 				if (interface >= MAX_CONFIG_INTERFACES ||
 				    !os_desc_cfg->interface[interface])
 					break;

[PATCH 5.15 146/168] usb: gadget: f_fs: Fix a race condition when processing setup packets.

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Wulff <Chris.Wulff@biamp.com>

commit 0aea736ddb877b93f6d2dd8cf439840d6b4970a9 upstream.

If the USB driver passes a pointer into the TRB buffer for creq, this
buffer can be overwritten with the status response as soon as the event
is queued. This can make the final check return USB_GADGET_DELAYED_STATUS
when it shouldn't. Instead use the stored wLength.

Fixes: 4d644abf2569 ("usb: gadget: f_fs: Only return delayed status when len is 0")
Cc: stable <stable@kernel.org>
Signed-off-by: Chris Wulff <chris.wulff@biamp.com>
Link: https://lore.kernel.org/r/CO1PR17MB5419BD664264A558B2395E28E1112@CO1PR17MB5419.namprd17.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_fs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -3414,7 +3414,7 @@ static int ffs_func_setup(struct usb_fun
 	__ffs_event_add(ffs, FUNCTIONFS_SETUP);
 	spin_unlock_irqrestore(&ffs->ev.waitq.lock, flags);
 
-	return creq->wLength == 0 ? USB_GADGET_DELAYED_STATUS : 0;
+	return ffs->ev.setup.wLength == 0 ? USB_GADGET_DELAYED_STATUS : 0;
 }
 
 static bool ffs_func_req_match(struct usb_function *f,

[PATCH 5.15 147/168] usb: xhci-plat: Dont include xhci.h

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

commit 4a237d55446ff67655dc3eed2d4a41997536fc4c upstream.

The xhci_plat.h should not need to include the entire xhci.h header.
This can cause redefinition in dwc3 if it selectively includes some xHCI
definitions. This is a prerequisite change for a fix to disable suspend
during initialization for dwc3.

Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/310acfa01c957a10d9feaca3f7206269866ba2eb.1713394973.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-plat.h |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/xhci-plat.h
+++ b/drivers/usb/host/xhci-plat.h
@@ -8,7 +8,9 @@
 #ifndef _XHCI_PLAT_H
 #define _XHCI_PLAT_H
 
-#include "xhci.h"	/* for hcd_to_xhci() */
+struct device;
+struct platform_device;
+struct usb_hcd;
 
 struct xhci_plat_priv {
 	const char *firmware_name;

[PATCH 5.15 148/168] usb: dwc3: core: Prevent phy suspend during init

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

commit 6d735722063a945de56472bdc6bfcb170fd43b86 upstream.

GUSB3PIPECTL.SUSPENDENABLE and GUSB2PHYCFG.SUSPHY should be cleared
during initialization. Suspend during initialization can result in
undefined behavior due to clock synchronization failure, which often
seen as core soft reset timeout.

The programming guide recommended these bits to be cleared during
initialization for DWC_usb3.0 version 1.94 and above (along with
DWC_usb31 and DWC_usb32). The current check in the driver does not
account if it's set by default setting from coreConsultant.

This is especially the case for DRD when switching mode to ensure the
phy clocks are available to change mode. Depending on the
platforms/design, some may be affected more than others. This is noted
in the DWC_usb3x programming guide under the above registers.

Let's just disable them during driver load and mode switching. Restore
them when the controller initialization completes.

Note that some platforms workaround this issue by disabling phy suspend
through "snps,dis_u3_susphy_quirk" and "snps,dis_u2_susphy_quirk" when
they should not need to.

Cc: stable@vger.kernel.org
Fixes: 9ba3aca8fe82 ("usb: dwc3: Disable phy suspend after power-on reset")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20da4e5a0c4678c9587d3da23f83bdd6d77353e9.1713394973.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/core.c   |   90 +++++++++++++++++++---------------------------
 drivers/usb/dwc3/core.h   |    1 
 drivers/usb/dwc3/gadget.c |    2 +
 drivers/usb/dwc3/host.c   |   27 +++++++++++++
 4 files changed, 68 insertions(+), 52 deletions(-)

--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -102,6 +102,27 @@ static int dwc3_get_dr_mode(struct dwc3
 	return 0;
 }
 
+void dwc3_enable_susphy(struct dwc3 *dwc, bool enable)
+{
+	u32 reg;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
+	if (enable && !dwc->dis_u3_susphy_quirk)
+		reg |= DWC3_GUSB3PIPECTL_SUSPHY;
+	else
+		reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
+
+	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+	if (enable && !dwc->dis_u2_susphy_quirk)
+		reg |= DWC3_GUSB2PHYCFG_SUSPHY;
+	else
+		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+
+	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+}
+
 void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
 {
 	u32 reg;
@@ -593,11 +614,8 @@ static int dwc3_core_ulpi_init(struct dw
  */
 static int dwc3_phy_setup(struct dwc3 *dwc)
 {
-	unsigned int hw_mode;
 	u32 reg;
 
-	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
-
 	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
 
 	/*
@@ -607,21 +625,16 @@ static int dwc3_phy_setup(struct dwc3 *d
 	reg &= ~DWC3_GUSB3PIPECTL_UX_EXIT_PX;
 
 	/*
-	 * Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY
-	 * to '0' during coreConsultant configuration. So default value
-	 * will be '0' when the core is reset. Application needs to set it
-	 * to '1' after the core initialization is completed.
+	 * Above DWC_usb3.0 1.94a, it is recommended to set
+	 * DWC3_GUSB3PIPECTL_SUSPHY to '0' during coreConsultant configuration.
+	 * So default value will be '0' when the core is reset. Application
+	 * needs to set it to '1' after the core initialization is completed.
+	 *
+	 * Similarly for DRD controllers, GUSB3PIPECTL.SUSPENDENABLE must be
+	 * cleared after power-on reset, and it can be set after core
+	 * initialization.
 	 */
-	if (!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A))
-		reg |= DWC3_GUSB3PIPECTL_SUSPHY;
-
-	/*
-	 * For DRD controllers, GUSB3PIPECTL.SUSPENDENABLE must be cleared after
-	 * power-on reset, and it can be set after core initialization, which is
-	 * after device soft-reset during initialization.
-	 */
-	if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD)
-		reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
+	reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
 
 	if (dwc->u2ss_inp3_quirk)
 		reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK;
@@ -647,9 +660,6 @@ static int dwc3_phy_setup(struct dwc3 *d
 	if (dwc->tx_de_emphasis_quirk)
 		reg |= DWC3_GUSB3PIPECTL_TX_DEEPH(dwc->tx_de_emphasis);
 
-	if (dwc->dis_u3_susphy_quirk)
-		reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
-
 	if (dwc->dis_del_phy_power_chg_quirk)
 		reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;
 
@@ -697,24 +707,15 @@ static int dwc3_phy_setup(struct dwc3 *d
 	}
 
 	/*
-	 * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to
-	 * '0' during coreConsultant configuration. So default value will
-	 * be '0' when the core is reset. Application needs to set it to
-	 * '1' after the core initialization is completed.
-	 */
-	if (!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A))
-		reg |= DWC3_GUSB2PHYCFG_SUSPHY;
-
-	/*
-	 * For DRD controllers, GUSB2PHYCFG.SUSPHY must be cleared after
-	 * power-on reset, and it can be set after core initialization, which is
-	 * after device soft-reset during initialization.
+	 * Above DWC_usb3.0 1.94a, it is recommended to set
+	 * DWC3_GUSB2PHYCFG_SUSPHY to '0' during coreConsultant configuration.
+	 * So default value will be '0' when the core is reset. Application
+	 * needs to set it to '1' after the core initialization is completed.
+	 *
+	 * Similarly for DRD controllers, GUSB2PHYCFG.SUSPHY must be cleared
+	 * after power-on reset, and it can be set after core initialization.
 	 */
-	if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD)
-		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
-
-	if (dwc->dis_u2_susphy_quirk)
-		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+	reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
 
 	if (dwc->dis_enblslpm_quirk)
 		reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
@@ -996,21 +997,6 @@ static int dwc3_core_init(struct dwc3 *d
 	if (ret)
 		goto err1;
 
-	if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD &&
-	    !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) {
-		if (!dwc->dis_u3_susphy_quirk) {
-			reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
-			reg |= DWC3_GUSB3PIPECTL_SUSPHY;
-			dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
-		}
-
-		if (!dwc->dis_u2_susphy_quirk) {
-			reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
-			reg |= DWC3_GUSB2PHYCFG_SUSPHY;
-			dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
-		}
-	}
-
 	dwc3_core_setup_global_control(dwc);
 	dwc3_core_num_eps(dwc);
 
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1517,6 +1517,7 @@ int dwc3_event_buffers_setup(struct dwc3
 void dwc3_event_buffers_cleanup(struct dwc3 *dwc);
 
 int dwc3_core_soft_reset(struct dwc3 *dwc);
+void dwc3_enable_susphy(struct dwc3 *dwc, bool enable);
 
 #if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
 int dwc3_host_init(struct dwc3 *dwc);
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2775,6 +2775,7 @@ static int __dwc3_gadget_start(struct dw
 	dwc3_ep0_out_start(dwc);
 
 	dwc3_gadget_enable_irq(dwc);
+	dwc3_enable_susphy(dwc, true);
 
 	return 0;
 
@@ -4512,6 +4513,7 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
 	if (!dwc->gadget)
 		return;
 
+	dwc3_enable_susphy(dwc, false);
 	usb_del_gadget(dwc->gadget);
 	dwc3_gadget_free_endpoints(dwc);
 	usb_put_gadget(dwc->gadget);
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -9,9 +9,30 @@
 
 #include <linux/acpi.h>
 #include <linux/platform_device.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
 
+#include "../host/xhci-plat.h"
 #include "core.h"
 
+static void dwc3_xhci_plat_start(struct usb_hcd *hcd)
+{
+	struct platform_device *pdev;
+	struct dwc3 *dwc;
+
+	if (!usb_hcd_is_primary_hcd(hcd))
+		return;
+
+	pdev = to_platform_device(hcd->self.controller);
+	dwc = dev_get_drvdata(pdev->dev.parent);
+
+	dwc3_enable_susphy(dwc, true);
+}
+
+static const struct xhci_plat_priv dwc3_xhci_plat_quirk = {
+	.plat_start = dwc3_xhci_plat_start,
+};
+
 static int dwc3_host_get_irq(struct dwc3 *dwc)
 {
 	struct platform_device	*dwc3_pdev = to_platform_device(dwc->dev);
@@ -117,6 +138,11 @@ int dwc3_host_init(struct dwc3 *dwc)
 		}
 	}
 
+	ret = platform_device_add_data(xhci, &dwc3_xhci_plat_quirk,
+				       sizeof(struct xhci_plat_priv));
+	if (ret)
+		goto err;
+
 	ret = platform_device_add(xhci);
 	if (ret) {
 		dev_err(dwc->dev, "failed to register xHCI device\n");
@@ -131,6 +157,7 @@ err:
 
 void dwc3_host_exit(struct dwc3 *dwc)
 {
+	dwc3_enable_susphy(dwc, false);
 	platform_device_unregister(dwc->xhci);
 	dwc->xhci = NULL;
 }

[PATCH 5.15 149/168] ALSA: hda/realtek: Fix mute led of HP Laptop 15-da3001TU

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aman Dhoot <amandhoot12@gmail.com>

commit 2d5af3ab9e6f1cf1468b2a5221b5c1f7f46c3333 upstream.

This patch simply add SND_PCI_QUIRK for HP Laptop 15-da3001TU to fixed
mute led of laptop.

Signed-off-by: Aman Dhoot <amandhoot12@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAMTp=B+3NG65Z684xMwHqdXDJhY+DJK-kuSw4adn6xwnG+b5JA@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9131,6 +9131,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x103c, 0x860f, "HP ZBook 15 G6", ALC285_FIXUP_HP_GPIO_AMP_INIT),
 	SND_PCI_QUIRK(0x103c, 0x861f, "HP Elite Dragonfly G1", ALC285_FIXUP_HP_GPIO_AMP_INIT),
 	SND_PCI_QUIRK(0x103c, 0x869d, "HP", ALC236_FIXUP_HP_MUTE_LED),
+	SND_PCI_QUIRK(0x103c, 0x86c1, "HP Laptop 15-da3001TU", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2),
 	SND_PCI_QUIRK(0x103c, 0x86c7, "HP Envy AiO 32", ALC274_FIXUP_HP_ENVY_GPIO),
 	SND_PCI_QUIRK(0x103c, 0x86e7, "HP Spectre x360 15-eb0xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1),
 	SND_PCI_QUIRK(0x103c, 0x86e8, "HP Spectre x360 15-eb0xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1),

[PATCH 5.15 150/168] btrfs: add missing mutex_unlock in btrfs_relocate_sys_chunks()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dominique Martinet <dominique.martinet@atmark-techno.com>

commit 9af503d91298c3f2945e73703f0e00995be08c30 upstream.

The previous patch that replaced BUG_ON by error handling forgot to
unlock the mutex in the error path.

Link: https://lore.kernel.org/all/Zh%2fHpAGFqa7YAFuM@duo.ucw.cz
Reported-by: Pavel Machek <pavel@denx.de>
Fixes: 7411055db5ce ("btrfs: handle chunk tree lookup error in btrfs_relocate_sys_chunks()")
CC: stable@vger.kernel.org
Reviewed-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/volumes.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -3374,6 +3374,7 @@ again:
 			 * alignment and size).
 			 */
 			ret = -EUCLEAN;
+			mutex_unlock(&fs_info->reclaim_bgs_lock);
 			goto error;
 		}
 

[PATCH 5.15 151/168] mptcp: ensure snd_nxt is properly initialized on connect

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <pabeni@redhat.com>

commit fb7a0d334894206ae35f023a82cad5a290fd7386 upstream.

Christoph reported a splat hinting at a corrupted snd_una:

  WARNING: CPU: 1 PID: 38 at net/mptcp/protocol.c:1005 __mptcp_clean_una+0x4b3/0x620 net/mptcp/protocol.c:1005
  Modules linked in:
  CPU: 1 PID: 38 Comm: kworker/1:1 Not tainted 6.9.0-rc1-gbbeac67456c9 #59
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
  Workqueue: events mptcp_worker
  RIP: 0010:__mptcp_clean_una+0x4b3/0x620 net/mptcp/protocol.c:1005
  Code: be 06 01 00 00 bf 06 01 00 00 e8 a8 12 e7 fe e9 00 fe ff ff e8
  	8e 1a e7 fe 0f b7 ab 3e 02 00 00 e9 d3 fd ff ff e8 7d 1a e7 fe
  	<0f> 0b 4c 8b bb e0 05 00 00 e9 74 fc ff ff e8 6a 1a e7 fe 0f 0b e9
  RSP: 0018:ffffc9000013fd48 EFLAGS: 00010293
  RAX: 0000000000000000 RBX: ffff8881029bd280 RCX: ffffffff82382fe4
  RDX: ffff8881003cbd00 RSI: ffffffff823833c3 RDI: 0000000000000001
  RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
  R10: 0000000000000000 R11: fefefefefefefeff R12: ffff888138ba8000
  R13: 0000000000000106 R14: ffff8881029bd908 R15: ffff888126560000
  FS:  0000000000000000(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f604a5dae38 CR3: 0000000101dac002 CR4: 0000000000170ef0
  Call Trace:
   <TASK>
   __mptcp_clean_una_wakeup net/mptcp/protocol.c:1055 [inline]
   mptcp_clean_una_wakeup net/mptcp/protocol.c:1062 [inline]
   __mptcp_retrans+0x7f/0x7e0 net/mptcp/protocol.c:2615
   mptcp_worker+0x434/0x740 net/mptcp/protocol.c:2767
   process_one_work+0x1e0/0x560 kernel/workqueue.c:3254
   process_scheduled_works kernel/workqueue.c:3335 [inline]
   worker_thread+0x3c7/0x640 kernel/workqueue.c:3416
   kthread+0x121/0x170 kernel/kthread.c:388
   ret_from_fork+0x44/0x50 arch/x86/kernel/process.c:147
   ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243
   </TASK>

When fallback to TCP happens early on a client socket, snd_nxt
is not yet initialized and any incoming ack will copy such value
into snd_una. If the mptcp worker (dumbly) tries mptcp-level
re-injection after such ack, that would unconditionally trigger a send
buffer cleanup using 'bad' snd_una values.

We could easily disable re-injection for fallback sockets, but such
dumb behavior already helped catching a few subtle issues and a very
low to zero impact in practice.

Instead address the issue always initializing snd_nxt (and write_seq,
for consistency) at connect time.

Fixes: 8fd738049ac3 ("mptcp: fallback in case of simultaneous connect")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/485
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240429-upstream-net-20240429-mptcp-snd_nxt-init-connect-v1-1-59ceac0a7dcb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mptcp/protocol.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -3395,6 +3395,9 @@ static int mptcp_stream_connect(struct s
 		MPTCP_INC_STATS(sock_net(ssock->sk), MPTCP_MIB_TOKENFALLBACKINIT);
 		mptcp_subflow_early_fallback(msk, subflow);
 	}
+
+	WRITE_ONCE(msk->write_seq, subflow->idsn);
+	WRITE_ONCE(msk->snd_nxt, subflow->idsn);
 	if (likely(!__mptcp_check_fallback(msk)))
 		MPTCP_INC_STATS(sock_net(sock->sk), MPTCP_MIB_MPCAPABLEACTIVE);
 

[PATCH 5.15 152/168] dt-bindings: iio: health: maxim,max30102: fix compatible check

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Javier Carrasco <javier.carrasco.cruz@gmail.com>

commit 89384a2b656b9dace4c965432a209d5c9c3a2a6f upstream.

The "maxim,green-led-current-microamp" property is only available for
the max30105 part (it provides an extra green LED), and must be set to
false for the max30102 part.

Instead, the max30100 part has been used for that, which is not
supported by this binding (it has its own binding).

This error was introduced during the txt to yaml conversion.

Fixes: 5a6a65b11e3a ("dt-bindings:iio:health:maxim,max30102: txt to yaml conversion")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240316-max30102_binding_fix-v1-1-e8e58f69ef8a@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
+++ b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
@@ -42,7 +42,7 @@ allOf:
       properties:
         compatible:
           contains:
-            const: maxim,max30100
+            const: maxim,max30102
     then:
       properties:
         maxim,green-led-current-microamp: false

[PATCH 5.15 153/168] iio:imu: adis16475: Fix sync mode setting

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ramona Gradinariu <ramona.bolboaca13@gmail.com>

commit 74a72baf204fd509bbe8b53eec35e39869d94341 upstream.

Fix sync mode setting by applying the necessary shift bits.

Fixes: fff7352bf7a3 ("iio: imu: Add support for adis16475")
Signed-off-by: Ramona Gradinariu <ramona.bolboaca13@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240405045309.816328-2-ramona.bolboaca13@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/imu/adis16475.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/iio/imu/adis16475.c
+++ b/drivers/iio/imu/adis16475.c
@@ -1145,6 +1145,7 @@ static int adis16475_config_sync_mode(st
 	struct device *dev = &st->adis.spi->dev;
 	const struct adis16475_sync *sync;
 	u32 sync_mode;
+	u16 val;
 
 	/* default to internal clk */
 	st->clk_freq = st->info->int_clk * 1000;
@@ -1214,8 +1215,9 @@ static int adis16475_config_sync_mode(st
 	 * I'm keeping this for simplicity and avoiding extra variables
 	 * in chip_info.
 	 */
+	val = ADIS16475_SYNC_MODE(sync->sync_mode);
 	ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL,
-				 ADIS16475_SYNC_MODE_MASK, sync->sync_mode);
+				 ADIS16475_SYNC_MODE_MASK, val);
 	if (ret)
 		return ret;
 

[PATCH 5.15 154/168] iio: accel: mxc4005: Interrupt handling fixes

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 57a1592784d622ecee0b71940c65429173996b33 upstream.

There are 2 issues with interrupt handling in the mxc4005 driver:

1. mxc4005_set_trigger_state() writes MXC4005_REG_INT_MASK1_BIT_DRDYE
(0x01) to INT_MASK1 to enable the interrupt, but to disable the interrupt
it writes ~MXC4005_REG_INT_MASK1_BIT_DRDYE which is 0xfe, so it enables
all other interrupt sources in the INT_SRC1 register. On the MXC4005 this
is not an issue because only bit 0 of the register is used. On the MXC6655
OTOH this is a problem since bit7 is used as TC (Temperature Compensation)
disable bit and writing 1 to this disables Temperature Compensation which
should only be done when running self-tests on the chip.

Write 0 instead of ~MXC4005_REG_INT_MASK1_BIT_DRDYE to disable
the interrupts to fix this.

2. The datasheets for the MXC4005 / MXC6655 do not state what the reset
value for the INT_MASK0 and INT_MASK1 registers is and since these are
write only we also cannot learn this from the hw. Presumably the reset
value for both is all 0, which means all interrupts disabled.

Explicitly set both registers to 0 from mxc4005_chip_init() to ensure
both masks are actually set to 0.

Fixes: 79846e33aac1 ("iio: accel: mxc4005: add support for mxc6655")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240326113700.56725-2-hdegoede@redhat.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/accel/mxc4005.c |   24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

--- a/drivers/iio/accel/mxc4005.c
+++ b/drivers/iio/accel/mxc4005.c
@@ -27,9 +27,13 @@
 #define MXC4005_REG_ZOUT_UPPER		0x07
 #define MXC4005_REG_ZOUT_LOWER		0x08
 
+#define MXC4005_REG_INT_MASK0		0x0A
+
 #define MXC4005_REG_INT_MASK1		0x0B
 #define MXC4005_REG_INT_MASK1_BIT_DRDYE	0x01
 
+#define MXC4005_REG_INT_CLR0		0x00
+
 #define MXC4005_REG_INT_CLR1		0x01
 #define MXC4005_REG_INT_CLR1_BIT_DRDYC	0x01
 
@@ -113,7 +117,9 @@ static bool mxc4005_is_readable_reg(stru
 static bool mxc4005_is_writeable_reg(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
+	case MXC4005_REG_INT_CLR0:
 	case MXC4005_REG_INT_CLR1:
+	case MXC4005_REG_INT_MASK0:
 	case MXC4005_REG_INT_MASK1:
 	case MXC4005_REG_CONTROL:
 		return true;
@@ -330,17 +336,13 @@ static int mxc4005_set_trigger_state(str
 {
 	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
 	struct mxc4005_data *data = iio_priv(indio_dev);
+	unsigned int val;
 	int ret;
 
 	mutex_lock(&data->mutex);
-	if (state) {
-		ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1,
-				   MXC4005_REG_INT_MASK1_BIT_DRDYE);
-	} else {
-		ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1,
-				   ~MXC4005_REG_INT_MASK1_BIT_DRDYE);
-	}
 
+	val = state ? MXC4005_REG_INT_MASK1_BIT_DRDYE : 0;
+	ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1, val);
 	if (ret < 0) {
 		mutex_unlock(&data->mutex);
 		dev_err(data->dev, "failed to update reg_int_mask1");
@@ -382,6 +384,14 @@ static int mxc4005_chip_init(struct mxc4
 
 	dev_dbg(data->dev, "MXC4005 chip id %02x\n", reg);
 
+	ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK0, 0);
+	if (ret < 0)
+		return dev_err_probe(data->dev, ret, "writing INT_MASK0\n");
+
+	ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1, 0);
+	if (ret < 0)
+		return dev_err_probe(data->dev, ret, "writing INT_MASK1\n");
+
 	return 0;
 }
 

[PATCH 5.15 155/168] tipc: fix UAF in error path

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <pabeni@redhat.com>

commit 080cbb890286cd794f1ee788bbc5463e2deb7c2b upstream.

Sam Page (sam4k) working with Trend Micro Zero Day Initiative reported
a UAF in the tipc_buf_append() error path:

BUG: KASAN: slab-use-after-free in kfree_skb_list_reason+0x47e/0x4c0
linux/net/core/skbuff.c:1183
Read of size 8 at addr ffff88804d2a7c80 by task poc/8034

CPU: 1 PID: 8034 Comm: poc Not tainted 6.8.2 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.0-debian-1.16.0-5 04/01/2014
Call Trace:
 <IRQ>
 __dump_stack linux/lib/dump_stack.c:88
 dump_stack_lvl+0xd9/0x1b0 linux/lib/dump_stack.c:106
 print_address_description linux/mm/kasan/report.c:377
 print_report+0xc4/0x620 linux/mm/kasan/report.c:488
 kasan_report+0xda/0x110 linux/mm/kasan/report.c:601
 kfree_skb_list_reason+0x47e/0x4c0 linux/net/core/skbuff.c:1183
 skb_release_data+0x5af/0x880 linux/net/core/skbuff.c:1026
 skb_release_all linux/net/core/skbuff.c:1094
 __kfree_skb linux/net/core/skbuff.c:1108
 kfree_skb_reason+0x12d/0x210 linux/net/core/skbuff.c:1144
 kfree_skb linux/./include/linux/skbuff.h:1244
 tipc_buf_append+0x425/0xb50 linux/net/tipc/msg.c:186
 tipc_link_input+0x224/0x7c0 linux/net/tipc/link.c:1324
 tipc_link_rcv+0x76e/0x2d70 linux/net/tipc/link.c:1824
 tipc_rcv+0x45f/0x10f0 linux/net/tipc/node.c:2159
 tipc_udp_recv+0x73b/0x8f0 linux/net/tipc/udp_media.c:390
 udp_queue_rcv_one_skb+0xad2/0x1850 linux/net/ipv4/udp.c:2108
 udp_queue_rcv_skb+0x131/0xb00 linux/net/ipv4/udp.c:2186
 udp_unicast_rcv_skb+0x165/0x3b0 linux/net/ipv4/udp.c:2346
 __udp4_lib_rcv+0x2594/0x3400 linux/net/ipv4/udp.c:2422
 ip_protocol_deliver_rcu+0x30c/0x4e0 linux/net/ipv4/ip_input.c:205
 ip_local_deliver_finish+0x2e4/0x520 linux/net/ipv4/ip_input.c:233
 NF_HOOK linux/./include/linux/netfilter.h:314
 NF_HOOK linux/./include/linux/netfilter.h:308
 ip_local_deliver+0x18e/0x1f0 linux/net/ipv4/ip_input.c:254
 dst_input linux/./include/net/dst.h:461
 ip_rcv_finish linux/net/ipv4/ip_input.c:449
 NF_HOOK linux/./include/linux/netfilter.h:314
 NF_HOOK linux/./include/linux/netfilter.h:308
 ip_rcv+0x2c5/0x5d0 linux/net/ipv4/ip_input.c:569
 __netif_receive_skb_one_core+0x199/0x1e0 linux/net/core/dev.c:5534
 __netif_receive_skb+0x1f/0x1c0 linux/net/core/dev.c:5648
 process_backlog+0x101/0x6b0 linux/net/core/dev.c:5976
 __napi_poll.constprop.0+0xba/0x550 linux/net/core/dev.c:6576
 napi_poll linux/net/core/dev.c:6645
 net_rx_action+0x95a/0xe90 linux/net/core/dev.c:6781
 __do_softirq+0x21f/0x8e7 linux/kernel/softirq.c:553
 do_softirq linux/kernel/softirq.c:454
 do_softirq+0xb2/0xf0 linux/kernel/softirq.c:441
 </IRQ>
 <TASK>
 __local_bh_enable_ip+0x100/0x120 linux/kernel/softirq.c:381
 local_bh_enable linux/./include/linux/bottom_half.h:33
 rcu_read_unlock_bh linux/./include/linux/rcupdate.h:851
 __dev_queue_xmit+0x871/0x3ee0 linux/net/core/dev.c:4378
 dev_queue_xmit linux/./include/linux/netdevice.h:3169
 neigh_hh_output linux/./include/net/neighbour.h:526
 neigh_output linux/./include/net/neighbour.h:540
 ip_finish_output2+0x169f/0x2550 linux/net/ipv4/ip_output.c:235
 __ip_finish_output linux/net/ipv4/ip_output.c:313
 __ip_finish_output+0x49e/0x950 linux/net/ipv4/ip_output.c:295
 ip_finish_output+0x31/0x310 linux/net/ipv4/ip_output.c:323
 NF_HOOK_COND linux/./include/linux/netfilter.h:303
 ip_output+0x13b/0x2a0 linux/net/ipv4/ip_output.c:433
 dst_output linux/./include/net/dst.h:451
 ip_local_out linux/net/ipv4/ip_output.c:129
 ip_send_skb+0x3e5/0x560 linux/net/ipv4/ip_output.c:1492
 udp_send_skb+0x73f/0x1530 linux/net/ipv4/udp.c:963
 udp_sendmsg+0x1a36/0x2b40 linux/net/ipv4/udp.c:1250
 inet_sendmsg+0x105/0x140 linux/net/ipv4/af_inet.c:850
 sock_sendmsg_nosec linux/net/socket.c:730
 __sock_sendmsg linux/net/socket.c:745
 __sys_sendto+0x42c/0x4e0 linux/net/socket.c:2191
 __do_sys_sendto linux/net/socket.c:2203
 __se_sys_sendto linux/net/socket.c:2199
 __x64_sys_sendto+0xe0/0x1c0 linux/net/socket.c:2199
 do_syscall_x64 linux/arch/x86/entry/common.c:52
 do_syscall_64+0xd8/0x270 linux/arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x6f/0x77 linux/arch/x86/entry/entry_64.S:120
RIP: 0033:0x7f3434974f29
Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d
01 f0 ff ff 73 01 c3 48 8b 0d 37 8f 0d 00 f7 d8 64 89 01 48
RSP: 002b:00007fff9154f2b8 EFLAGS: 00000212 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3434974f29
RDX: 00000000000032c8 RSI: 00007fff9154f300 RDI: 0000000000000003
RBP: 00007fff915532e0 R08: 00007fff91553360 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000212 R12: 000055ed86d261d0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 </TASK>

In the critical scenario, either the relevant skb is freed or its
ownership is transferred into a frag_lists. In both cases, the cleanup
code must not free it again: we need to clear the skb reference earlier.

Fixes: 1149557d64c9 ("tipc: eliminate unnecessary linearization of incoming buffers")
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-23852
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/752f1ccf762223d109845365d07f55414058e5a3.1714484273.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/tipc/msg.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/net/tipc/msg.c
+++ b/net/tipc/msg.c
@@ -156,6 +156,11 @@ int tipc_buf_append(struct sk_buff **hea
 	if (!head)
 		goto err;
 
+	/* Either the input skb ownership is transferred to headskb
+	 * or the input skb is freed, clear the reference to avoid
+	 * bad access on error path.
+	 */
+	*buf = NULL;
 	if (skb_try_coalesce(head, frag, &headstolen, &delta)) {
 		kfree_skb_partial(frag, headstolen);
 	} else {
@@ -179,7 +184,6 @@ int tipc_buf_append(struct sk_buff **hea
 		*headbuf = NULL;
 		return 1;
 	}
-	*buf = NULL;
 	return 0;
 err:
 	kfree_skb(*buf);

[PATCH 5.15 156/168] net: bcmgenet: synchronize use of bcmgenet_set_rx_mode()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Doug Berger <opendmb@gmail.com>

commit 2dbe5f19368caae63b1f59f5bc2af78c7d522b3a upstream.

The ndo_set_rx_mode function is synchronized with the
netif_addr_lock spinlock and BHs disabled. Since this
function is also invoked directly from the driver the
same synchronization should be applied.

Fixes: 72f96347628e ("net: bcmgenet: set Rx mode before starting netif")
Cc: stable@vger.kernel.org
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2,7 +2,7 @@
 /*
  * Broadcom GENET (Gigabit Ethernet) controller driver
  *
- * Copyright (c) 2014-2020 Broadcom
+ * Copyright (c) 2014-2024 Broadcom
  */
 
 #define pr_fmt(fmt)				"bcmgenet: " fmt
@@ -3310,7 +3310,9 @@ static void bcmgenet_netif_start(struct
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 
 	/* Start the network engine */
+	netif_addr_lock_bh(dev);
 	bcmgenet_set_rx_mode(dev);
+	netif_addr_unlock_bh(dev);
 	bcmgenet_enable_rx_napi(priv);
 
 	umac_enable_set(priv, CMD_TX_EN | CMD_RX_EN, true);

[PATCH 5.15 157/168] ASoC: tegra: Fix DSPK 16-bit playback

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sameer Pujar <spujar@nvidia.com>

commit 2e93a29b48a017c777d4fcbfcc51aba4e6a90d38 upstream.

DSPK configuration is wrong for 16-bit playback and this happens because
the client config is always fixed at 24-bit in hw_params(). Fix this by
updating the client config to 16-bit for the respective playback.

Fixes: 327ef6470266 ("ASoC: tegra: Add Tegra186 based DSPK driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://msgid.link/r/20240405104306.551036-1-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/tegra/tegra186_dspk.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/sound/soc/tegra/tegra186_dspk.c
+++ b/sound/soc/tegra/tegra186_dspk.c
@@ -1,8 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
+// SPDX-FileCopyrightText: Copyright (c) 2020-2024 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 //
 // tegra186_dspk.c - Tegra186 DSPK driver
-//
-// Copyright (c) 2020 NVIDIA CORPORATION. All rights reserved.
 
 #include <linux/clk.h>
 #include <linux/device.h>
@@ -241,14 +240,14 @@ static int tegra186_dspk_hw_params(struc
 		return -EINVAL;
 	}
 
-	cif_conf.client_bits = TEGRA_ACIF_BITS_24;
-
 	switch (params_format(params)) {
 	case SNDRV_PCM_FORMAT_S16_LE:
 		cif_conf.audio_bits = TEGRA_ACIF_BITS_16;
+		cif_conf.client_bits = TEGRA_ACIF_BITS_16;
 		break;
 	case SNDRV_PCM_FORMAT_S32_LE:
 		cif_conf.audio_bits = TEGRA_ACIF_BITS_32;
+		cif_conf.client_bits = TEGRA_ACIF_BITS_24;
 		break;
 	default:
 		dev_err(dev, "unsupported format!\n");

[PATCH 5.15 158/168] ASoC: ti: davinci-mcasp: Fix race condition during probe

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joao Paulo Goncalves <joao.goncalves@toradex.com>

commit d18ca8635db2f88c17acbdf6412f26d4f6aff414 upstream.

When using davinci-mcasp as CPU DAI with simple-card, there are some
conditions that cause simple-card to finish registering a sound card before
davinci-mcasp finishes registering all sound components. This creates a
non-working sound card from userspace with no problem indication apart
from not being able to play/record audio on a PCM stream. The issue
arises during simultaneous probe execution of both drivers. Specifically,
the simple-card driver, awaiting a CPU DAI, proceeds as soon as
davinci-mcasp registers its DAI. However, this process can lead to the
client mutex lock (client_mutex in soc-core.c) being held or davinci-mcasp
being preempted before PCM DMA registration on davinci-mcasp finishes.
This situation occurs when the probes of both drivers run concurrently.
Below is the code path for this condition. To solve the issue, defer
davinci-mcasp CPU DAI registration to the last step in the audio part of
it. This way, simple-card CPU DAI parsing will be deferred until all
audio components are registered.

Fail Code Path:

simple-card.c: probe starts
simple-card.c: simple_dai_link_of: simple_parse_node(..,cpu,..) returns EPROBE_DEFER, no CPU DAI yet
davinci-mcasp.c: probe starts
davinci-mcasp.c: devm_snd_soc_register_component() register CPU DAI
simple-card.c: probes again, finish CPU DAI parsing and call devm_snd_soc_register_card()
simple-card.c: finish probe
davinci-mcasp.c: *dma_pcm_platform_register() register PCM  DMA
davinci-mcasp.c: probe finish

Cc: stable@vger.kernel.org
Fixes: 9fbd58cf4ab0 ("ASoC: davinci-mcasp: Choose PCM driver based on configured DMA controller")
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240417184138.1104774-1-jpaulo.silvagoncalves@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/ti/davinci-mcasp.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/sound/soc/ti/davinci-mcasp.c
+++ b/sound/soc/ti/davinci-mcasp.c
@@ -2423,12 +2423,6 @@ static int davinci_mcasp_probe(struct pl
 
 	mcasp_reparent_fck(pdev);
 
-	ret = devm_snd_soc_register_component(&pdev->dev, &davinci_mcasp_component,
-					      &davinci_mcasp_dai[mcasp->op_mode], 1);
-
-	if (ret != 0)
-		goto err;
-
 	ret = davinci_mcasp_get_dma_type(mcasp);
 	switch (ret) {
 	case PCM_EDMA:
@@ -2455,6 +2449,12 @@ static int davinci_mcasp_probe(struct pl
 		goto err;
 	}
 
+	ret = devm_snd_soc_register_component(&pdev->dev, &davinci_mcasp_component,
+					      &davinci_mcasp_dai[mcasp->op_mode], 1);
+
+	if (ret != 0)
+		goto err;
+
 no_audio:
 	ret = davinci_mcasp_init_gpiochip(mcasp);
 	if (ret) {

[PATCH 5.15 159/168] dyndbg: fix old BUG_ON in >control parser

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jim Cromie <jim.cromie@gmail.com>

commit 00e7d3bea2ce7dac7bee1cf501fb071fd0ea8f6c upstream.

Fix a BUG_ON from 2009.  Even if it looks "unreachable" (I didn't
really look), lets make sure by removing it, doing pr_err and return
-EINVAL instead.

Cc: stable <stable@kernel.org>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20240429193145.66543-2-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 lib/dynamic_debug.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -260,7 +260,11 @@ static int ddebug_tokenize(char *buf, ch
 		} else {
 			for (end = buf; *end && !isspace(*end); end++)
 				;
-			BUG_ON(end == buf);
+			if (end == buf) {
+				pr_err("parse err after word:%d=%s\n", nwords,
+				       nwords ? words[nwords - 1] : "<none>");
+				return -EINVAL;
+			}
 		}
 
 		/* `buf' is start of word, `end' is one past its end */

[PATCH 5.15 160/168] slimbus: qcom-ngd-ctrl: Add timeout for wait operation

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Viken Dadhaniya <quic_vdadhani@quicinc.com>

commit 98241a774db49988f25b7b3657026ce51ccec293 upstream.

In current driver qcom_slim_ngd_up_worker() indefinitely
waiting for ctrl->qmi_up completion object. This is
resulting in workqueue lockup on Kthread.

Added wait_for_completion_interruptible_timeout to
allow the thread to wait for specific timeout period and
bail out instead waiting infinitely.

Fixes: a899d324863a ("slimbus: qcom-ngd-ctrl: add Sub System Restart support")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240430091238.35209-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/slimbus/qcom-ngd-ctrl.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/slimbus/qcom-ngd-ctrl.c
+++ b/drivers/slimbus/qcom-ngd-ctrl.c
@@ -1376,7 +1376,11 @@ static void qcom_slim_ngd_up_worker(stru
 	ctrl = container_of(work, struct qcom_slim_ngd_ctrl, ngd_up_work);
 
 	/* Make sure qmi service is up before continuing */
-	wait_for_completion_interruptible(&ctrl->qmi_up);
+	if (!wait_for_completion_interruptible_timeout(&ctrl->qmi_up,
+						       msecs_to_jiffies(MSEC_PER_SEC))) {
+		dev_err(ctrl->dev, "QMI wait timeout\n");
+		return;
+	}
 
 	mutex_lock(&ctrl->ssr_lock);
 	qcom_slim_ngd_enable(ctrl, true);

[PATCH 5.15 161/168] mei: me: add lunar lake point M DID

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Usyskin <alexander.usyskin@intel.com>

commit 4108a30f1097eead0f6bd5d885e6bf093b4d460f upstream.

Add Lunar (Point) Lake M device id.

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240421135631.223362-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/misc/mei/hw-me-regs.h |    2 ++
 drivers/misc/mei/pci-me.c     |    2 ++
 2 files changed, 4 insertions(+)

--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -115,6 +115,8 @@
 #define MEI_DEV_ID_ARL_S      0x7F68  /* Arrow Lake Point S */
 #define MEI_DEV_ID_ARL_H      0x7770  /* Arrow Lake Point H */
 
+#define MEI_DEV_ID_LNL_M      0xA870  /* Lunar Lake Point M */
+
 /*
  * MEI HW Section
  */
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -121,6 +121,8 @@ static const struct pci_device_id mei_me
 	{MEI_PCI_DEVICE(MEI_DEV_ID_ARL_S, MEI_ME_PCH15_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_ARL_H, MEI_ME_PCH15_CFG)},
 
+	{MEI_PCI_DEVICE(MEI_DEV_ID_LNL_M, MEI_ME_PCH15_CFG)},
+
 	/* required last entry */
 	{0, }
 };

[PATCH 5.15 162/168] drm/vmwgfx: Fix invalid reads in fence signaled events

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zack Rusin <zack.rusin@broadcom.com>

commit a37ef7613c00f2d72c8fc08bd83fb6cc76926c8c upstream.

Correctly set the length of the drm_event to the size of the structure
that's actually used.

The length of the drm_event was set to the parent structure instead of
to the drm_vmw_event_fence which is supposed to be read. drm_read
uses the length parameter to copy the event to the user space thus
resuling in oob reads.

Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: 8b7de6aa8468 ("vmwgfx: Rework fence event action")
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-23566
Cc: David Airlie <airlied@gmail.com>
CC: Daniel Vetter <daniel@ffwll.ch>
Cc: Zack Rusin <zack.rusin@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # v3.4+
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425192748.1761522-1-zack.rusin@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_fence.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
@@ -1068,7 +1068,7 @@ static int vmw_event_fence_action_create
 	}
 
 	event->event.base.type = DRM_VMW_EVENT_FENCE_SIGNALED;
-	event->event.base.length = sizeof(*event);
+	event->event.base.length = sizeof(event->event);
 	event->event.user_data = user_data;
 
 	ret = drm_event_reserve_init(dev, file_priv, &event->base, &event->event.base);

[PATCH 5.15 163/168] net: fix out-of-bounds access in ops_init

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>

commit a26ff37e624d12e28077e5b24d2b264f62764ad6 upstream.

net_alloc_generic is called by net_alloc, which is called without any
locking. It reads max_gen_ptrs, which is changed under pernet_ops_rwsem. It
is read twice, first to allocate an array, then to set s.len, which is
later used to limit the bounds of the array access.

It is possible that the array is allocated and another thread is
registering a new pernet ops, increments max_gen_ptrs, which is then used
to set s.len with a larger than allocated length for the variable array.

Fix it by reading max_gen_ptrs only once in net_alloc_generic. If
max_gen_ptrs is later incremented, it will be caught in net_assign_generic.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Fixes: 073862ba5d24 ("netns: fix net_alloc_generic()")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240502132006.3430840-1-cascardo@igalia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/net_namespace.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -68,12 +68,15 @@ DEFINE_COOKIE(net_cookie);
 
 static struct net_generic *net_alloc_generic(void)
 {
+	unsigned int gen_ptrs = READ_ONCE(max_gen_ptrs);
+	unsigned int generic_size;
 	struct net_generic *ng;
-	unsigned int generic_size = offsetof(struct net_generic, ptr[max_gen_ptrs]);
+
+	generic_size = offsetof(struct net_generic, ptr[gen_ptrs]);
 
 	ng = kzalloc(generic_size, GFP_KERNEL);
 	if (ng)
-		ng->s.len = max_gen_ptrs;
+		ng->s.len = gen_ptrs;
 
 	return ng;
 }
@@ -1211,7 +1214,11 @@ static int register_pernet_operations(st
 		if (error < 0)
 			return error;
 		*ops->id = error;
-		max_gen_ptrs = max(max_gen_ptrs, *ops->id + 1);
+		/* This does not require READ_ONCE as writers already hold
+		 * pernet_ops_rwsem. But WRITE_ONCE is needed to protect
+		 * net_alloc_generic.
+		 */
+		WRITE_ONCE(max_gen_ptrs, max(max_gen_ptrs, *ops->id + 1));
 	}
 	error = __register_pernet_operations(list, ops);
 	if (error) {

[PATCH 5.15 164/168] hwmon: (pmbus/ucd9000) Increase delay from 250 to 500us

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lakshmi Yadlapati <lakshmiy@us.ibm.com>

commit 26e8383b116d0dbe74e28f86646563ab46d66d83 upstream.

Following the failure observed with a delay of 250us, experiments were
conducted with various delays. It was found that a delay of 350us
effectively mitigated the issue.

To provide a more optimal solution while still allowing a margin for
stability, the delay is being adjusted to 500us.

Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com>
Link: https://lore.kernel.org/r/20240507194603.1305750-1-lakshmiy@us.ibm.com
Fixes: 8d655e6523764 ("hwmon: (ucd90320) Add minimum delay between bus accesses")
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hwmon/pmbus/ucd9000.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/hwmon/pmbus/ucd9000.c
+++ b/drivers/hwmon/pmbus/ucd9000.c
@@ -80,11 +80,11 @@ struct ucd9000_debugfs_entry {
  * It has been observed that the UCD90320 randomly fails register access when
  * doing another access right on the back of a register write. To mitigate this
  * make sure that there is a minimum delay between a write access and the
- * following access. The 250us is based on experimental data. At a delay of
- * 200us the issue seems to go away. Add a bit of extra margin to allow for
+ * following access. The 500 is based on experimental data. At a delay of
+ * 350us the issue seems to go away. Add a bit of extra margin to allow for
  * system to system differences.
  */
-#define UCD90320_WAIT_DELAY_US 250
+#define UCD90320_WAIT_DELAY_US 500
 
 static inline void ucd90320_wait(const struct ucd9000_data *data)
 {

[PATCH 5.15 165/168] regulator: core: fix debugfs creation regression

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan+linaro@kernel.org>

commit 2a4b49bb58123bad6ec0e07b02845f74c23d5e04 upstream.

regulator_get() may sometimes be called more than once for the same
consumer device, something which before commit dbe954d8f163 ("regulator:
core: Avoid debugfs: Directory ...  already present! error") resulted in
errors being logged.

A couple of recent commits broke the handling of such cases so that
attributes are now erroneously created in the debugfs root directory the
second time a regulator is requested and the log is filled with errors
like:

	debugfs: File 'uA_load' in directory '/' already present!
	debugfs: File 'min_uV' in directory '/' already present!
	debugfs: File 'max_uV' in directory '/' already present!
	debugfs: File 'constraint_flags' in directory '/' already present!

on any further calls.

Fixes: 2715bb11cfff ("regulator: core: Fix more error checking for debugfs_create_dir()")
Fixes: 08880713ceec ("regulator: core: Streamline debugfs operations")
Cc: stable@vger.kernel.org
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240509133304.8883-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/regulator/core.c |   27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)

--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1872,19 +1872,24 @@ static struct regulator *create_regulato
 		}
 	}
 
-	if (err != -EEXIST)
+	if (err != -EEXIST) {
 		regulator->debugfs = debugfs_create_dir(supply_name, rdev->debugfs);
-	if (IS_ERR(regulator->debugfs))
-		rdev_dbg(rdev, "Failed to create debugfs directory\n");
+		if (IS_ERR(regulator->debugfs)) {
+			rdev_dbg(rdev, "Failed to create debugfs directory\n");
+			regulator->debugfs = NULL;
+		}
+	}
 
-	debugfs_create_u32("uA_load", 0444, regulator->debugfs,
-			   &regulator->uA_load);
-	debugfs_create_u32("min_uV", 0444, regulator->debugfs,
-			   &regulator->voltage[PM_SUSPEND_ON].min_uV);
-	debugfs_create_u32("max_uV", 0444, regulator->debugfs,
-			   &regulator->voltage[PM_SUSPEND_ON].max_uV);
-	debugfs_create_file("constraint_flags", 0444, regulator->debugfs,
-			    regulator, &constraint_flags_fops);
+	if (regulator->debugfs) {
+		debugfs_create_u32("uA_load", 0444, regulator->debugfs,
+				   &regulator->uA_load);
+		debugfs_create_u32("min_uV", 0444, regulator->debugfs,
+				   &regulator->voltage[PM_SUSPEND_ON].min_uV);
+		debugfs_create_u32("max_uV", 0444, regulator->debugfs,
+				   &regulator->voltage[PM_SUSPEND_ON].max_uV);
+		debugfs_create_file("constraint_flags", 0444, regulator->debugfs,
+				    regulator, &constraint_flags_fops);
+	}
 
 	/*
 	 * Check now if the regulator is an always on regulator - if

[PATCH 5.15 166/168] Bluetooth: qca: add missing firmware sanity checks

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan+linaro@kernel.org>

commit 2e4edfa1e2bd821a317e7d006517dcf2f3fac68d upstream.

Add the missing sanity checks when parsing the firmware files before
downloading them to avoid accessing and corrupting memory beyond the
vmalloced buffer.

Fixes: 83e81961ff7e ("Bluetooth: btqca: Introduce generic QCA ROME support")
Cc: stable@vger.kernel.org	# 4.10
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bluetooth/btqca.c |   38 ++++++++++++++++++++++++++++++++------
 1 file changed, 32 insertions(+), 6 deletions(-)

--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -182,9 +182,10 @@ int qca_send_pre_shutdown_cmd(struct hci
 }
 EXPORT_SYMBOL_GPL(qca_send_pre_shutdown_cmd);
 
-static void qca_tlv_check_data(struct hci_dev *hdev,
+static int qca_tlv_check_data(struct hci_dev *hdev,
 			       struct qca_fw_config *config,
-		u8 *fw_data, enum qca_btsoc_type soc_type)
+			       u8 *fw_data, size_t fw_size,
+			       enum qca_btsoc_type soc_type)
 {
 	const u8 *data;
 	u32 type_len;
@@ -200,6 +201,9 @@ static void qca_tlv_check_data(struct hc
 
 	switch (config->type) {
 	case ELF_TYPE_PATCH:
+		if (fw_size < 7)
+			return -EINVAL;
+
 		config->dnld_mode = QCA_SKIP_EVT_VSE_CC;
 		config->dnld_type = QCA_SKIP_EVT_VSE_CC;
 
@@ -208,6 +212,9 @@ static void qca_tlv_check_data(struct hc
 		bt_dev_dbg(hdev, "File version      : 0x%x", fw_data[6]);
 		break;
 	case TLV_TYPE_PATCH:
+		if (fw_size < sizeof(struct tlv_type_hdr) + sizeof(struct tlv_type_patch))
+			return -EINVAL;
+
 		tlv = (struct tlv_type_hdr *)fw_data;
 		type_len = le32_to_cpu(tlv->type_len);
 		tlv_patch = (struct tlv_type_patch *)tlv->data;
@@ -247,6 +254,9 @@ static void qca_tlv_check_data(struct hc
 		break;
 
 	case TLV_TYPE_NVM:
+		if (fw_size < sizeof(struct tlv_type_hdr))
+			return -EINVAL;
+
 		tlv = (struct tlv_type_hdr *)fw_data;
 
 		type_len = le32_to_cpu(tlv->type_len);
@@ -255,17 +265,26 @@ static void qca_tlv_check_data(struct hc
 		BT_DBG("TLV Type\t\t : 0x%x", type_len & 0x000000ff);
 		BT_DBG("Length\t\t : %d bytes", length);
 
+		if (fw_size < length + (tlv->data - fw_data))
+			return -EINVAL;
+
 		idx = 0;
 		data = tlv->data;
-		while (idx < length) {
+		while (idx < length - sizeof(struct tlv_type_nvm)) {
 			tlv_nvm = (struct tlv_type_nvm *)(data + idx);
 
 			tag_id = le16_to_cpu(tlv_nvm->tag_id);
 			tag_len = le16_to_cpu(tlv_nvm->tag_len);
 
+			if (length < idx + sizeof(struct tlv_type_nvm) + tag_len)
+				return -EINVAL;
+
 			/* Update NVM tags as needed */
 			switch (tag_id) {
 			case EDL_TAG_ID_HCI:
+				if (tag_len < 3)
+					return -EINVAL;
+
 				/* HCI transport layer parameters
 				 * enabling software inband sleep
 				 * onto controller side.
@@ -281,6 +300,9 @@ static void qca_tlv_check_data(struct hc
 				break;
 
 			case EDL_TAG_ID_DEEP_SLEEP:
+				if (tag_len < 1)
+					return -EINVAL;
+
 				/* Sleep enable mask
 				 * enabling deep sleep feature on controller.
 				 */
@@ -289,14 +311,16 @@ static void qca_tlv_check_data(struct hc
 				break;
 			}
 
-			idx += (sizeof(u16) + sizeof(u16) + 8 + tag_len);
+			idx += sizeof(struct tlv_type_nvm) + tag_len;
 		}
 		break;
 
 	default:
 		BT_ERR("Unknown TLV type %d", config->type);
-		break;
+		return -EINVAL;
 	}
+
+	return 0;
 }
 
 static int qca_tlv_send_segment(struct hci_dev *hdev, int seg_size,
@@ -446,7 +470,9 @@ static int qca_download_firmware(struct
 	memcpy(data, fw->data, size);
 	release_firmware(fw);
 
-	qca_tlv_check_data(hdev, config, data, soc_type);
+	ret = qca_tlv_check_data(hdev, config, data, size, soc_type);
+	if (ret)
+		return ret;
 
 	segment = data;
 	remain = size;

[PATCH 5.15 167/168] Bluetooth: qca: fix NVM configuration parsing

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan+linaro@kernel.org>

commit a112d3c72a227f2edbb6d8094472cc6e503e52af upstream.

The NVM configuration files used by WCN3988 and WCN3990/1/8 have two
sets of configuration tags that are enclosed by a type-length header of
type four which the current parser fails to account for.

Instead the driver happily parses random data as if it were valid tags,
something which can lead to the configuration data being corrupted if it
ever encounters the words 0x0011 or 0x001b.

As is clear from commit b63882549b2b ("Bluetooth: btqca: Fix the NVM
baudrate tag offcet for wcn3991") the intention has always been to
process the configuration data also for WCN3991 and WCN3998 which
encodes the baud rate at a different offset.

Fix the parser so that it can handle the WCN3xxx configuration files,
which has an enclosing type-length header of type four and two sets of
TLV tags enclosed by a type-length header of type two and three,
respectively.

Note that only the first set, which contains the tags the driver is
currently looking for, will be parsed for now.

With the parser fixed, the software in-band sleep bit will now be set
for WCN3991 and WCN3998 (as it is for later controllers) and the default
baud rate 3200000 may be updated by the driver also for WCN3xxx
controllers.

Notably the deep-sleep feature bit is already set by default in all
configuration files in linux-firmware.

Fixes: 4219d4686875 ("Bluetooth: btqca: Add wcn3990 firmware download support.")
Cc: stable@vger.kernel.org	# 4.19
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bluetooth/btqca.c |   24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -195,6 +195,7 @@ static int qca_tlv_check_data(struct hci
 	struct tlv_type_patch *tlv_patch;
 	struct tlv_type_nvm *tlv_nvm;
 	uint8_t nvm_baud_rate = config->user_baud_rate;
+	u8 type;
 
 	config->dnld_mode = QCA_SKIP_EVT_NONE;
 	config->dnld_type = QCA_SKIP_EVT_NONE;
@@ -260,11 +261,30 @@ static int qca_tlv_check_data(struct hci
 		tlv = (struct tlv_type_hdr *)fw_data;
 
 		type_len = le32_to_cpu(tlv->type_len);
-		length = (type_len >> 8) & 0x00ffffff;
+		length = type_len >> 8;
+		type = type_len & 0xff;
 
-		BT_DBG("TLV Type\t\t : 0x%x", type_len & 0x000000ff);
+		/* Some NVM files have more than one set of tags, only parse
+		 * the first set when it has type 2 for now. When there is
+		 * more than one set there is an enclosing header of type 4.
+		 */
+		if (type == 4) {
+			if (fw_size < 2 * sizeof(struct tlv_type_hdr))
+				return -EINVAL;
+
+			tlv++;
+
+			type_len = le32_to_cpu(tlv->type_len);
+			length = type_len >> 8;
+			type = type_len & 0xff;
+		}
+
+		BT_DBG("TLV Type\t\t : 0x%x", type);
 		BT_DBG("Length\t\t : %d bytes", length);
 
+		if (type != 2)
+			break;
+
 		if (fw_size < length + (tlv->data - fw_data))
 			return -EINVAL;
 

[PATCH 5.15 168/168] Bluetooth: qca: fix firmware check error path

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan+linaro@kernel.org>

commit 40d442f969fb1e871da6fca73d3f8aef1f888558 upstream.

A recent commit fixed the code that parses the firmware files before
downloading them to the controller but introduced a memory leak in case
the sanity checks ever fail.

Make sure to free the firmware buffer before returning on errors.

Fixes: f905ae0be4b7 ("Bluetooth: qca: add missing firmware sanity checks")
Cc: stable@vger.kernel.org      # 4.19
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bluetooth/btqca.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -492,7 +492,7 @@ static int qca_download_firmware(struct
 
 	ret = qca_tlv_check_data(hdev, config, data, size, soc_type);
 	if (ret)
-		return ret;
+		goto out;
 
 	segment = data;
 	remain = size;

Re: [PATCH 5.15 100/168] ASoC: meson: axg-card: Fix nonatomic links

[Jerome Brunet]

On Tue 14 May 2024 at 12:19, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:

> 5.15-stable review patch.  If anyone has any objections, please let me know.
>

Patch #100 and #101 should not be applied on v5.15.

A bit of history:
* 3y ago patches #44 and #45 have been applied to fix a problem in AML
  audio, but it caused a regression.
* No solution was found at the time, so the patches were reverted by
  change #100 and #101
* Recently I came up with change #43 which fixes the regression from 3y
  ago, so the fixes for original problem could be applied again (with a
  different sha1 of course)

The situation was detailed in the cover letter of the related series:
https://lore.kernel.org/linux-amlogic/20240426152946.3078805-1-jbrunet@baylibre.com

From what I can see the backport is fine on 6.8, 6.6 and 6.1.
Things starts to be problematic on 5.15.

In general, if upstream commit b11d26660dff is backported, it is fine to
apply upstream commits:
 * dcba52ace7d4 ("ASoC: meson: axg-card: make links nonatomic")
 * f949ed458ad1 ("ASoC: meson: axg-tdm-interface: manage formatters in trigger")
And the following commits (which are reverts for the 2 above) should not be applied:
 * 0c9b152c72e5 ("ASoC: meson: axg-card: Fix nonatomic links")
 * c26830b6c5c5 ("ASoC: meson: axg-tdm-interface: Fix formatters in trigger"")

If b11d26660dff is not backported, the 2 first change should be
backported, or reverted if they have already been.

* v5.15: just dropping change #100 and #101 should be fine
* v5.10: I suppose this is where the backport starts to be problematic
         Best would be to drop #31, #32, #73 and #74 for now
* v5.4: Same drop #26, #27, #60 and #61
* v4.19: drop #17 and #44

Regards
Jerome

> ------------------
>
> From: Neil Armstrong <narmstrong@baylibre.com>
>
> [ Upstream commit 0c9b152c72e53016e96593bdbb8cffe2176694b9 ]
>
> This commit e138233e56e9829e65b6293887063a1a3ccb2d68 causes the
> following system crash when using audio on G12A/G12B & SM1 systems:
>
>  BUG: sleeping function called from invalid context at kernel/locking/mutex.c:282
>   in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/0
>  preempt_count: 10001, expected: 0
>  RCU nest depth: 0, expected: 0
>  Preemption disabled at:
>  schedule_preempt_disabled+0x20/0x2c
>
>  mutex_lock+0x24/0x60
>  _snd_pcm_stream_lock_irqsave+0x20/0x3c
>  snd_pcm_period_elapsed+0x24/0xa4
>  axg_fifo_pcm_irq_block+0x64/0xdc
>  __handle_irq_event_percpu+0x104/0x264
>  handle_irq_event+0x48/0xb4
>  ...
>  start_kernel+0x3f0/0x484
>  __primary_switched+0xc0/0xc8
>
> Revert this commit until the crash is fixed.
>
> Fixes: e138233e56e9829e65b6 ("ASoC: meson: axg-card: make links nonatomic")
> Reported-by: Dmitry Shmidt <dimitrysh@google.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> Acked-by: Jerome Brunet <jbrunet@baylibre.com>
> Link: https://lore.kernel.org/r/20220421155725.2589089-2-narmstrong@baylibre.com
> Signed-off-by: Mark Brown <broonie@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  sound/soc/meson/axg-card.c | 1 -
>  1 file changed, 1 deletion(-)
>
> diff --git a/sound/soc/meson/axg-card.c b/sound/soc/meson/axg-card.c
> index cbbaa55d92a66..2b77010c2c5ce 100644
> --- a/sound/soc/meson/axg-card.c
> +++ b/sound/soc/meson/axg-card.c
> @@ -320,7 +320,6 @@ static int axg_card_add_link(struct snd_soc_card *card, struct device_node *np,
>  
>  	dai_link->cpus = cpu;
>  	dai_link->num_cpus = 1;
> -	dai_link->nonatomic = true;
>  
>  	ret = meson_card_parse_dai(card, np, &dai_link->cpus->of_node,
>  				   &dai_link->cpus->dai_name);


-- 
Jerome

Re: [PATCH 5.15 100/168] ASoC: meson: axg-card: Fix nonatomic links

[Jerome Brunet]

On Tue 14 May 2024 at 14:26, Jerome Brunet <jbrunet@baylibre.com> wrote:

> On Tue 14 May 2024 at 12:19, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
>
>> 5.15-stable review patch.  If anyone has any objections, please let me know.
>>
>
> Patch #100 and #101 should not be applied on v5.15.
>
> A bit of history:
> * 3y ago patches #44 and #45 have been applied to fix a problem in AML
>   audio, but it caused a regression.
> * No solution was found at the time, so the patches were reverted by
>   change #100 and #101
> * Recently I came up with change #43 which fixes the regression from 3y
>   ago, so the fixes for original problem could be applied again (with a
>   different sha1 of course)
>
> The situation was detailed in the cover letter of the related series:
> https://lore.kernel.org/linux-amlogic/20240426152946.3078805-1-jbrunet@baylibre.com
>
> From what I can see the backport is fine on 6.8, 6.6 and 6.1.
> Things starts to be problematic on 5.15.
>
> In general, if upstream commit b11d26660dff is backported, it is fine to
> apply upstream commits:
>  * dcba52ace7d4 ("ASoC: meson: axg-card: make links nonatomic")
>  * f949ed458ad1 ("ASoC: meson: axg-tdm-interface: manage formatters in trigger")
> And the following commits (which are reverts for the 2 above) should not be applied:
>  * 0c9b152c72e5 ("ASoC: meson: axg-card: Fix nonatomic links")
>  * c26830b6c5c5 ("ASoC: meson: axg-tdm-interface: Fix formatters in trigger"")
>
> If b11d26660dff is not backported, the 2 first change should be
> backported, or reverted if they have already been.

If b11d26660dff is not backported, the 2 first change should *NOT* be
backported, or reverted if they have already been.

Sorry for the confusing typo

>
> * v5.15: just dropping change #100 and #101 should be fine
> * v5.10: I suppose this is where the backport starts to be problematic
>          Best would be to drop #31, #32, #73 and #74 for now
> * v5.4: Same drop #26, #27, #60 and #61
> * v4.19: drop #17 and #44
>
> Regards
> Jerome
>
>> ------------------
>>
>> From: Neil Armstrong <narmstrong@baylibre.com>
>>
>> [ Upstream commit 0c9b152c72e53016e96593bdbb8cffe2176694b9 ]
>>
>> This commit e138233e56e9829e65b6293887063a1a3ccb2d68 causes the
>> following system crash when using audio on G12A/G12B & SM1 systems:
>>
>>  BUG: sleeping function called from invalid context at kernel/locking/mutex.c:282
>>   in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/0
>>  preempt_count: 10001, expected: 0
>>  RCU nest depth: 0, expected: 0
>>  Preemption disabled at:
>>  schedule_preempt_disabled+0x20/0x2c
>>
>>  mutex_lock+0x24/0x60
>>  _snd_pcm_stream_lock_irqsave+0x20/0x3c
>>  snd_pcm_period_elapsed+0x24/0xa4
>>  axg_fifo_pcm_irq_block+0x64/0xdc
>>  __handle_irq_event_percpu+0x104/0x264
>>  handle_irq_event+0x48/0xb4
>>  ...
>>  start_kernel+0x3f0/0x484
>>  __primary_switched+0xc0/0xc8
>>
>> Revert this commit until the crash is fixed.
>>
>> Fixes: e138233e56e9829e65b6 ("ASoC: meson: axg-card: make links nonatomic")
>> Reported-by: Dmitry Shmidt <dimitrysh@google.com>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> Acked-by: Jerome Brunet <jbrunet@baylibre.com>
>> Link: https://lore.kernel.org/r/20220421155725.2589089-2-narmstrong@baylibre.com
>> Signed-off-by: Mark Brown <broonie@kernel.org>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>> ---
>>  sound/soc/meson/axg-card.c | 1 -
>>  1 file changed, 1 deletion(-)
>>
>> diff --git a/sound/soc/meson/axg-card.c b/sound/soc/meson/axg-card.c
>> index cbbaa55d92a66..2b77010c2c5ce 100644
>> --- a/sound/soc/meson/axg-card.c
>> +++ b/sound/soc/meson/axg-card.c
>> @@ -320,7 +320,6 @@ static int axg_card_add_link(struct snd_soc_card *card, struct device_node *np,
>>  
>>  	dai_link->cpus = cpu;
>>  	dai_link->num_cpus = 1;
>> -	dai_link->nonatomic = true;
>>  
>>  	ret = meson_card_parse_dai(card, np, &dai_link->cpus->of_node,
>>  				   &dai_link->cpus->dai_name);


-- 
Jerome

Re: [PATCH 5.15 000/168] 5.15.159-rc1 review

[Harshit Mogalapalli]

Hi Greg,

On 14/05/24 15:48, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.159 release.
> There are 168 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 16 May 2024 10:09:32 +0000.
> Anything received after that time might be too late.
> 

No problems seen on x86_64 and aarch64 with our testing.

Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>

Note: selftests have a build problem in 5.15.y, 5.10.y, 5.4.y, 4.19.y

5.15.y revert: 
https://lore.kernel.org/all/20240506084635.2942238-1-harshit.m.mogalapalli@oracle.com/

This is not a regression in this tag but from somewhere around 5.15.152 tag.

Reverts for other stable releases:
5.10.y: 
https://lore.kernel.org/all/20240506084926.2943076-1-harshit.m.mogalapalli@oracle.com/
5.4.y: 
https://lore.kernel.org/all/20240506085044.2943648-1-harshit.m.mogalapalli@oracle.com/
4.19.y: 
https://lore.kernel.org/all/20240506105724.3068232-1-harshit.m.mogalapalli@oracle.com/

Could you please queue these up for future releases.


Thanks,
Harshit
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.159-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Re: [PATCH 5.15 000/168] 5.15.159-rc1 review

[Martin Faltesek]

Build failure on arm:

In file included from drivers/iommu/mtk_iommu_v1.c:22:
drivers/iommu/mtk_iommu_v1.c:579:25: error: 'mtk_iommu_v1_of_ids'
undeclared here (not in a function); did you mean 'mtk_iommu_of_ids'?
  579 | MODULE_DEVICE_TABLE(of, mtk_iommu_v1_of_ids);
      |                         ^~~~~~~~~~~~~~~~~~~
./include/linux/module.h:244:15: note: in definition of macro
'MODULE_DEVICE_TABLE'
  244 | extern typeof(name) __mod_##type##__##name##_device_table
         \
      |               ^~~~
./include/linux/module.h:244:21: error:
'__mod_of__mtk_iommu_v1_of_ids_device_table' aliased to undefined
symbol 'mtk_iommu_v1_of_ids'
  244 | extern typeof(name) __mod_##type##__##name##_device_table
         \
      |                     ^~~~~~
drivers/iommu/mtk_iommu_v1.c:579:1: note: in expansion of macro
'MODULE_DEVICE_TABLE'
  579 | MODULE_DEVICE_TABLE(of, mtk_iommu_v1_of_ids);
      | ^~~~~~~~~~~~~~~~~~~
make[2]: *** [scripts/Makefile.build:289: drivers/iommu/mtk_iommu_v1.o] Error 1
make[1]: *** [scripts/Makefile.build:552: drivers/iommu] Error 2

This is from patch:

bce893a92324  krzk@kernel.org           2024-05-14  iommu: mtk: fix
module autoloading

+MODULE_DEVICE_TABLE(of, mtk_iommu_v1_of_ids);

should be, I think:

+MODULE_DEVICE_TABLE(of, mtk_iommu_of_ids);


On Tue, May 14, 2024 at 11:29 AM Harshit Mogalapalli
<harshit.m.mogalapalli@oracle.com> wrote:
>
> Hi Greg,
>
> On 14/05/24 15:48, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.15.159 release.
> > There are 168 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu, 16 May 2024 10:09:32 +0000.
> > Anything received after that time might be too late.
> >
>
> No problems seen on x86_64 and aarch64 with our testing.
>
> Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
>
> Note: selftests have a build problem in 5.15.y, 5.10.y, 5.4.y, 4.19.y
>
> 5.15.y revert:
> https://lore.kernel.org/all/20240506084635.2942238-1-harshit.m.mogalapalli@oracle.com/
>
> This is not a regression in this tag but from somewhere around 5.15.152 tag.
>
> Reverts for other stable releases:
> 5.10.y:
> https://lore.kernel.org/all/20240506084926.2943076-1-harshit.m.mogalapalli@oracle.com/
> 5.4.y:
> https://lore.kernel.org/all/20240506085044.2943648-1-harshit.m.mogalapalli@oracle.com/
> 4.19.y:
> https://lore.kernel.org/all/20240506105724.3068232-1-harshit.m.mogalapalli@oracle.com/
>
> Could you please queue these up for future releases.
>
>
> Thanks,
> Harshit
> > The whole patch series can be found in one patch at:
> >       https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.159-rc1.gz
> > or in the git tree and branch at:
> >       git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
>

Re: [PATCH 5.15 000/168] 5.15.159-rc1 review

[Florian Fainelli]

On 5/14/24 03:18, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.159 release.
> There are 168 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 16 May 2024 10:09:32 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.159-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH 5.15 100/168] ASoC: meson: axg-card: Fix nonatomic links

[Greg Kroah-Hartman]

On Tue, May 14, 2024 at 02:26:02PM +0200, Jerome Brunet wrote:
> 
> On Tue 14 May 2024 at 12:19, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> 
> > 5.15-stable review patch.  If anyone has any objections, please let me know.
> >
> 
> Patch #100 and #101 should not be applied on v5.15.
> 
> A bit of history:
> * 3y ago patches #44 and #45 have been applied to fix a problem in AML
>   audio, but it caused a regression.
> * No solution was found at the time, so the patches were reverted by
>   change #100 and #101
> * Recently I came up with change #43 which fixes the regression from 3y
>   ago, so the fixes for original problem could be applied again (with a
>   different sha1 of course)
> 
> The situation was detailed in the cover letter of the related series:
> https://lore.kernel.org/linux-amlogic/20240426152946.3078805-1-jbrunet@baylibre.com
> 
> >From what I can see the backport is fine on 6.8, 6.6 and 6.1.
> Things starts to be problematic on 5.15.
> 
> In general, if upstream commit b11d26660dff is backported, it is fine to
> apply upstream commits:
>  * dcba52ace7d4 ("ASoC: meson: axg-card: make links nonatomic")
>  * f949ed458ad1 ("ASoC: meson: axg-tdm-interface: manage formatters in trigger")
> And the following commits (which are reverts for the 2 above) should not be applied:
>  * 0c9b152c72e5 ("ASoC: meson: axg-card: Fix nonatomic links")
>  * c26830b6c5c5 ("ASoC: meson: axg-tdm-interface: Fix formatters in trigger"")
> 
> If b11d26660dff is not backported, the 2 first change should be
> backported, or reverted if they have already been.
> 
> * v5.15: just dropping change #100 and #101 should be fine

I have now dropped these.

> * v5.10: I suppose this is where the backport starts to be problematic
>          Best would be to drop #31, #32, #73 and #74 for now

All now dropped.

> * v5.4: Same drop #26, #27, #60 and #61

All now dropped.

> * v4.19: drop #17 and #44

Dropped!

thanks for letting me know.

greg k-h

Re: [PATCH 5.15 000/168] 5.15.159-rc1 review

[Greg Kroah-Hartman]

On Tue, May 14, 2024 at 07:36:24PM -0500, Martin Faltesek wrote:
> Build failure on arm:
> 
> In file included from drivers/iommu/mtk_iommu_v1.c:22:
> drivers/iommu/mtk_iommu_v1.c:579:25: error: 'mtk_iommu_v1_of_ids'
> undeclared here (not in a function); did you mean 'mtk_iommu_of_ids'?
>   579 | MODULE_DEVICE_TABLE(of, mtk_iommu_v1_of_ids);
>       |                         ^~~~~~~~~~~~~~~~~~~
> ./include/linux/module.h:244:15: note: in definition of macro
> 'MODULE_DEVICE_TABLE'
>   244 | extern typeof(name) __mod_##type##__##name##_device_table
>          \
>       |               ^~~~
> ./include/linux/module.h:244:21: error:
> '__mod_of__mtk_iommu_v1_of_ids_device_table' aliased to undefined
> symbol 'mtk_iommu_v1_of_ids'
>   244 | extern typeof(name) __mod_##type##__##name##_device_table
>          \
>       |                     ^~~~~~
> drivers/iommu/mtk_iommu_v1.c:579:1: note: in expansion of macro
> 'MODULE_DEVICE_TABLE'
>   579 | MODULE_DEVICE_TABLE(of, mtk_iommu_v1_of_ids);
>       | ^~~~~~~~~~~~~~~~~~~
> make[2]: *** [scripts/Makefile.build:289: drivers/iommu/mtk_iommu_v1.o] Error 1
> make[1]: *** [scripts/Makefile.build:552: drivers/iommu] Error 2
> 
> This is from patch:
> 
> bce893a92324  krzk@kernel.org           2024-05-14  iommu: mtk: fix
> module autoloading
> 
> +MODULE_DEVICE_TABLE(of, mtk_iommu_v1_of_ids);
> 
> should be, I think:
> 
> +MODULE_DEVICE_TABLE(of, mtk_iommu_of_ids);
> 

Good catch, now fixed up.  I'll push out a -rc2 with this in it.

greg k-h

Re: [PATCH 5.15 000/168] 5.15.159-rc1 review

[Shuah Khan]

On 5/14/24 04:18, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.159 release.
> There are 168 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 16 May 2024 10:09:32 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.159-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah