linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Huang Rui <ray.huang@amd.com>
To: Felipe Balbi <balbi@ti.com>,
	Alan Stern <stern@rowland.harvard.edu>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Paul Zimmerman <Paul.Zimmerman@synopsys.com>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>,
	Jason Chang <jason.chang@amd.com>,
	Vincent Wan <vincent.wan@amd.com>, Tony Li <tony.li@amd.com>,
	<linux-usb@vger.kernel.org>, <linux-pci@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	Huang Rui <ray.huang@amd.com>
Subject: [PATCH v4 15/20] usb: dwc3: add disable usb3 suspend phy quirk
Date: Thu, 30 Oct 2014 18:08:40 +0800	[thread overview]
Message-ID: <1414663725-2195-16-git-send-email-ray.huang@amd.com> (raw)
In-Reply-To: <1414663725-2195-1-git-send-email-ray.huang@amd.com>

This patch adds disable usb3 suspend phy quirk, and some special platforms
can configure that if it is needed.

Signed-off-by: Huang Rui <ray.huang@amd.com>
---
 Documentation/devicetree/bindings/usb/dwc3.txt | 1 +
 drivers/usb/dwc3/core.c                        | 7 +++++++
 drivers/usb/dwc3/core.h                        | 2 ++
 drivers/usb/dwc3/platform_data.h               | 1 +
 4 files changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index a9e54ae..3720fca 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -32,6 +32,7 @@ Optional properties:
  - snps,tx_de_emphasis_quirk: when set core will set Tx de-emphasis value.
  - snps,tx_de_emphasis: the value driven to the PHY is controlled by the
 			LTSSM during USB3 Compliance mode.
+ - snps,dis_u3_susphy_quirk: when set core will disable USB3 suspend phy.
 
 This is usually a subnode to DWC3 glue to which it is connected.
 
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index b55fa5b..fdc715a 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -404,6 +404,10 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
 	if (dwc->tx_de_emphasis_quirk)
 		reg |= DWC3_GUSB3PIPECTL_TX_DEEPH(dwc->tx_de_emphasis);
 
+	/* FIXME will move FPGA flag when AMD NL taps out */
+	if (dwc->dis_u3_susphy_quirk && dwc->is_fpga)
+		reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
+
 	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
 
 	mdelay(100);
@@ -809,6 +813,8 @@ static int dwc3_probe(struct platform_device *pdev)
 				"snps,lfps_filter_quirk");
 		dwc->rx_detect_poll_quirk = of_property_read_bool(node,
 				"snps,rx_detect_poll_quirk");
+		dwc->dis_u3_susphy_quirk = of_property_read_bool(node,
+				"snps,dis_u3_susphy_quirk");
 
 		dwc->tx_de_emphasis_quirk = of_property_read_bool(node,
 				"snps,tx_de_emphasis_quirk");
@@ -831,6 +837,7 @@ static int dwc3_probe(struct platform_device *pdev)
 		dwc->del_phy_power_chg_quirk = pdata->del_phy_power_chg_quirk;
 		dwc->lfps_filter_quirk = pdata->lfps_filter_quirk;
 		dwc->rx_detect_poll_quirk = pdata->rx_detect_poll_quirk;
+		dwc->dis_u3_susphy_quirk = pdata->dis_u3_susphy_quirk;
 
 		dwc->tx_de_emphasis_quirk = pdata->tx_de_emphasis_quirk;
 		if (pdata->tx_de_emphasis)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 469ee13..be793f7 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -697,6 +697,7 @@ struct dwc3_scratchpad_array {
  * @del_phy_power_chg_quirk: set if we enable delay phy power change quirk
  * @lfps_filter_quirk: set if we enable LFPS filter quirk
  * @rx_detect_poll_quirk: set if we enable rx_detect to polling LFPS quirk
+ * @dis_u3_susphy_quirk: set if we disable usb3 suspend phy
  * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
  * @tx_de_emphasis: Tx de-emphasis value
  * 	0       - -6dB de-emphasis
@@ -818,6 +819,7 @@ struct dwc3 {
 	unsigned		del_phy_power_chg_quirk:1;
 	unsigned		lfps_filter_quirk:1;
 	unsigned		rx_detect_poll_quirk:1;
+	unsigned		dis_u3_susphy_quirk:1;
 
 	unsigned		tx_de_emphasis_quirk:1;
 	unsigned		tx_de_emphasis:2;
diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
index e1ab900..0f1d5ad 100644
--- a/drivers/usb/dwc3/platform_data.h
+++ b/drivers/usb/dwc3/platform_data.h
@@ -36,6 +36,7 @@ struct dwc3_platform_data {
 	unsigned del_phy_power_chg_quirk:1;
 	unsigned lfps_filter_quirk:1;
 	unsigned rx_detect_poll_quirk:1;
+	unsigned dis_u3_susphy_quirk:1;
 
 	unsigned tx_de_emphasis_quirk:1;
 	unsigned tx_de_emphasis:2;
-- 
1.9.1


  parent reply	other threads:[~2014-10-30 10:08 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-30 10:08 [PATCH v4 00/20] usb: dwc3: add support for AMD Nolan SoC Huang Rui
2014-10-30 10:08 ` [PATCH v4 01/20] usb: dwc3: enable hibernation if to be supported Huang Rui
2014-10-30 11:35   ` Arnd Bergmann
2014-10-30 11:36     ` Huang Rui
2014-10-30 14:08     ` Felipe Balbi
2014-10-30 14:14       ` Arnd Bergmann
2014-10-30 14:18         ` Felipe Balbi
2014-10-30 10:08 ` [PATCH v4 02/20] usb: dwc3: add a flag to check if it is FPGA board Huang Rui
2014-10-30 10:08 ` [PATCH v4 03/20] usb: dwc3: initialize platform data at pci glue layer Huang Rui
2014-10-30 10:08 ` [PATCH v4 04/20] usb: dwc3: add disable scramble quirk Huang Rui
2014-10-30 10:08 ` [PATCH v4 05/20] usb: dwc3: add lpm erratum support Huang Rui
2014-10-30 10:08 ` [PATCH v4 06/20] usb: dwc3: add U2Exit LFPS quirk Huang Rui
2014-10-30 10:08 ` [PATCH v4 07/20] usb: dwc3: add P3 in U2 SS Inactive quirk Huang Rui
2014-10-30 10:08 ` [PATCH v4 08/20] usb: dwc3: add request P1/P2/P3 quirk Huang Rui
2014-10-30 10:08 ` [PATCH v4 09/20] usb: dwc3: add delay " Huang Rui
2014-10-30 10:08 ` [PATCH v4 10/20] usb: dwc3: add delay phy power change quirk Huang Rui
2014-10-30 10:08 ` [PATCH v4 11/20] usb: dwc3: add LFPS filter quirk Huang Rui
2014-10-30 10:08 ` [PATCH v4 12/20] usb: dwc3: add rx_detect to polling LFPS quirk Huang Rui
2014-10-30 10:08 ` [PATCH v4 13/20] usb: dwc3: set SUSPHY bit for all cores Huang Rui
2014-10-30 10:08 ` [PATCH v4 14/20] usb: dwc3: add Tx de-emphasis quirk Huang Rui
2014-10-30 16:42   ` Felipe Balbi
2014-10-31  1:29     ` Huang Rui
2014-10-31  3:00       ` Felipe Balbi
2014-10-30 10:08 ` Huang Rui [this message]
2014-10-30 10:08 ` [PATCH v4 16/20] usb: dwc3: add disable usb2 suspend phy quirk Huang Rui
2014-10-30 16:39   ` Felipe Balbi
2014-10-31  1:34     ` Huang Rui
2014-10-30 10:08 ` [PATCH v4 17/20] PCI: Add support for AMD Nolan USB3 DRD Huang Rui
2014-10-30 10:08 ` [PATCH v4 18/20] PCI: Prevent xHCI driver from claiming AMD Nolan USB3 DRD device Huang Rui
2014-10-30 10:08 ` [PATCH v4 19/20] usb: dwc3: add support for AMD Nolan platform Huang Rui
2014-10-30 16:38   ` Felipe Balbi
2014-10-31  1:35     ` Huang Rui
2014-10-30 10:08 ` [PATCH v4 20/20] usb: dwc3: make HIRD threshold configurable Huang Rui
2014-10-30 16:37   ` Felipe Balbi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1414663725-2195-16-git-send-email-ray.huang@amd.com \
    --to=ray.huang@amd.com \
    --cc=Paul.Zimmerman@synopsys.com \
    --cc=balbi@ti.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=jason.chang@amd.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=sergei.shtylyov@cogentembedded.com \
    --cc=stern@rowland.harvard.edu \
    --cc=tony.li@amd.com \
    --cc=vincent.wan@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).