* [PATCH v2 0/5] PCI: imx6: refine codes and add compliance tests mode support
@ 2021-09-13 5:41 Richard Zhu
2021-09-13 5:41 ` [PATCH v2 1/5] PCI: imx6: Encapsulate the clock enable into one standalone function Richard Zhu
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: Richard Zhu @ 2021-09-13 5:41 UTC (permalink / raw)
To: l.stach, bhelgaas, lorenzo.pieralisi
Cc: linux-pci, linux-imx, linux-arm-kernel, linux-kernel, kernel
This series patches refine pci-imx6 driver and do the following changes.
- Encapsulate the clock enable into one standalone function
- Add the error propagation from host_init
- Balance the usage of the regulator and clocks when link never came up
- Add the compliance tests mode support
Main changes from v1 to v2:
Regarding Lucas' comments.
- Move the placement of the new imx6_pcie_clk_enable() to avoid the
forward declarition.
- Seperate the second patch of v1 patch-set to three patches.
- Use the module_param to replace the kernel command line.
Regarding Bjorn's comments:
- Use the cover-letter for a multi-patch series.
- Correct the subject line, and refine the commit logs. For example,
remove the timestamp of the logs.
drivers/pci/controller/dwc/pci-imx6.c | 166 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------------------------------------
1 file changed, 105 insertions(+), 61 deletions(-)
[PATCH v2 1/5] PCI: imx6: Encapsulate the clock enable into one
[PATCH v2 2/5] PCI: imx6: Add the error propagation from host_init
[PATCH v2 3/5] PCI: imx6: Fix the regulator dump when link never came
[PATCH v2 4/5] PCI: imx6: Fix the clock reference handling unbalance
[PATCH v2 5/5] PCI: imx6: Add the compliance tests mode support
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 1/5] PCI: imx6: Encapsulate the clock enable into one standalone function
2021-09-13 5:41 [PATCH v2 0/5] PCI: imx6: refine codes and add compliance tests mode support Richard Zhu
@ 2021-09-13 5:41 ` Richard Zhu
2021-09-13 5:41 ` [PATCH v2 2/5] PCI: imx6: Add the error propagation from host_init Richard Zhu
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Richard Zhu @ 2021-09-13 5:41 UTC (permalink / raw)
To: l.stach, bhelgaas, lorenzo.pieralisi
Cc: linux-pci, linux-imx, linux-arm-kernel, linux-kernel, kernel,
Richard Zhu
No function changes, just encapsulate the i.MX PCIe clocks enable
operations into one standalone function
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 79 ++++++++++++++++-----------
1 file changed, 48 insertions(+), 31 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 80fc98acf097..64260b91c474 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -470,38 +470,16 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
return ret;
}
-static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
-{
- u32 val;
- struct device *dev = imx6_pcie->pci->dev;
-
- if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr,
- IOMUXC_GPR22, val,
- val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED,
- PHY_PLL_LOCK_WAIT_USLEEP_MAX,
- PHY_PLL_LOCK_WAIT_TIMEOUT))
- dev_err(dev, "PCIe PLL lock timeout\n");
-}
-
-static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
+static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie)
{
struct dw_pcie *pci = imx6_pcie->pci;
struct device *dev = pci->dev;
int ret;
- if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
- ret = regulator_enable(imx6_pcie->vpcie);
- if (ret) {
- dev_err(dev, "failed to enable vpcie regulator: %d\n",
- ret);
- return;
- }
- }
-
ret = clk_prepare_enable(imx6_pcie->pcie_phy);
if (ret) {
dev_err(dev, "unable to enable pcie_phy clock\n");
- goto err_pcie_phy;
+ return ret;
}
ret = clk_prepare_enable(imx6_pcie->pcie_bus);
@@ -524,6 +502,51 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
/* allow the clocks to stabilize */
usleep_range(200, 500);
+ return 0;
+
+err_ref_clk:
+ clk_disable_unprepare(imx6_pcie->pcie);
+err_pcie:
+ clk_disable_unprepare(imx6_pcie->pcie_bus);
+err_pcie_bus:
+ clk_disable_unprepare(imx6_pcie->pcie_phy);
+
+ return ret;
+}
+
+static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
+{
+ u32 val;
+ struct device *dev = imx6_pcie->pci->dev;
+
+ if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr,
+ IOMUXC_GPR22, val,
+ val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED,
+ PHY_PLL_LOCK_WAIT_USLEEP_MAX,
+ PHY_PLL_LOCK_WAIT_TIMEOUT))
+ dev_err(dev, "PCIe PLL lock timeout\n");
+}
+
+static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
+{
+ struct dw_pcie *pci = imx6_pcie->pci;
+ struct device *dev = pci->dev;
+ int ret;
+
+ if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
+ ret = regulator_enable(imx6_pcie->vpcie);
+ if (ret) {
+ dev_err(dev, "failed to enable vpcie regulator: %d\n",
+ ret);
+ return;
+ }
+ }
+
+ ret = imx6_pcie_clk_enable(imx6_pcie);
+ if (ret) {
+ dev_err(dev, "unable to enable pcie clocks\n");
+ goto err_clks;
+ }
/* Some boards don't have PCIe reset GPIO. */
if (gpio_is_valid(imx6_pcie->reset_gpio)) {
@@ -578,13 +601,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
return;
-err_ref_clk:
- clk_disable_unprepare(imx6_pcie->pcie);
-err_pcie:
- clk_disable_unprepare(imx6_pcie->pcie_bus);
-err_pcie_bus:
- clk_disable_unprepare(imx6_pcie->pcie_phy);
-err_pcie_phy:
+err_clks:
if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
ret = regulator_disable(imx6_pcie->vpcie);
if (ret)
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 2/5] PCI: imx6: Add the error propagation from host_init
2021-09-13 5:41 [PATCH v2 0/5] PCI: imx6: refine codes and add compliance tests mode support Richard Zhu
2021-09-13 5:41 ` [PATCH v2 1/5] PCI: imx6: Encapsulate the clock enable into one standalone function Richard Zhu
@ 2021-09-13 5:41 ` Richard Zhu
2021-09-13 5:41 ` [PATCH v2 3/5] PCI: imx6: Fix the regulator dump when link never came up Richard Zhu
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Richard Zhu @ 2021-09-13 5:41 UTC (permalink / raw)
To: l.stach, bhelgaas, lorenzo.pieralisi
Cc: linux-pci, linux-imx, linux-arm-kernel, linux-kernel, kernel,
Richard Zhu
Since there is error return check of the host_init callback, add error
check to imx6_pcie_deassert_core_reset() function, and change the
function type accordingly.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 64260b91c474..d3479f646c4f 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -527,24 +527,24 @@ static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
dev_err(dev, "PCIe PLL lock timeout\n");
}
-static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
+static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
{
struct dw_pcie *pci = imx6_pcie->pci;
struct device *dev = pci->dev;
- int ret;
+ int ret, err;
if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
ret = regulator_enable(imx6_pcie->vpcie);
if (ret) {
dev_err(dev, "failed to enable vpcie regulator: %d\n",
ret);
- return;
+ return ret;
}
}
- ret = imx6_pcie_clk_enable(imx6_pcie);
- if (ret) {
- dev_err(dev, "unable to enable pcie clocks\n");
+ err = imx6_pcie_clk_enable(imx6_pcie);
+ if (err) {
+ dev_err(dev, "unable to enable pcie clocks: %d\n", err);
goto err_clks;
}
@@ -599,7 +599,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
break;
}
- return;
+ return 0;
err_clks:
if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
@@ -608,6 +608,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
dev_err(dev, "failed to disable vpcie regulator: %d\n",
ret);
}
+ return err;
}
static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
@@ -858,11 +859,18 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
static int imx6_pcie_host_init(struct pcie_port *pp)
{
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+ struct device *dev = pci->dev;
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
+ int ret;
imx6_pcie_assert_core_reset(imx6_pcie);
imx6_pcie_init_phy(imx6_pcie);
- imx6_pcie_deassert_core_reset(imx6_pcie);
+ ret = imx6_pcie_deassert_core_reset(imx6_pcie);
+ if (ret < 0) {
+ dev_err(dev, "pcie host init failed: %d.\n", ret);
+ return ret;
+ }
+
imx6_setup_phy_mpll(imx6_pcie);
return 0;
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 3/5] PCI: imx6: Fix the regulator dump when link never came up
2021-09-13 5:41 [PATCH v2 0/5] PCI: imx6: refine codes and add compliance tests mode support Richard Zhu
2021-09-13 5:41 ` [PATCH v2 1/5] PCI: imx6: Encapsulate the clock enable into one standalone function Richard Zhu
2021-09-13 5:41 ` [PATCH v2 2/5] PCI: imx6: Add the error propagation from host_init Richard Zhu
@ 2021-09-13 5:41 ` Richard Zhu
2021-09-13 5:41 ` [PATCH v2 4/5] PCI: imx6: Fix the clock reference handling unbalance " Richard Zhu
2021-09-13 5:41 ` [PATCH v2 5/5] PCI: imx6: Add the compliance tests mode support Richard Zhu
4 siblings, 0 replies; 6+ messages in thread
From: Richard Zhu @ 2021-09-13 5:41 UTC (permalink / raw)
To: l.stach, bhelgaas, lorenzo.pieralisi
Cc: linux-pci, linux-imx, linux-arm-kernel, linux-kernel, kernel,
Richard Zhu
When PCIe PHY link never came up and vpcie regulator is present, there
would be following dump when try to put the regulator.
Disable this regulator to fix this dump when link never came up.
imx6q-pcie 33800000.pcie: Phy link never came up
imx6q-pcie: probe of 33800000.pcie failed with error -110
------------[ cut here ]------------
WARNING: CPU: 3 PID: 119 at drivers/regulator/core.c:2256 _regulator_put.part.0+0x14c/0x158
Modules linked in:
CPU: 3 PID: 119 Comm: kworker/u8:2 Not tainted 5.13.0-rc7-next-20210625-94710-ge4e92b2588a3 #10
Hardware name: FSL i.MX8MM EVK board (DT)
Workqueue: events_unbound async_run_entry_fn
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
pc : _regulator_put.part.0+0x14c/0x158
lr : regulator_put+0x34/0x48
sp : ffff8000122ebb30
x29: ffff8000122ebb30 x28: ffff800011be7000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000000 x24: ffff00000025f2bc
x23: ffff00000025f2c0 x22: ffff00000025f010 x21: ffff8000122ebc18
x20: ffff800011e3fa60 x19: ffff00000375fd80 x18: 0000000000000010
x17: 000000040044ffff x16: 00400032b5503510 x15: 0000000000000108
x14: ffff0000003cc938 x13: 00000000ffffffea x12: 0000000000000000
x11: 0000000000000000 x10: ffff80001076ba88 x9 : ffff80001076a540
x8 : ffff00000025f2c0 x7 : ffff0000001f4450 x6 : ffff000000176cd8
x5 : ffff000003857880 x4 : 0000000000000000 x3 : ffff800011e3fe30
x2 : ffff0000003cc4c0 x1 : 0000000000000000 x0 : 0000000000000001
Call trace:
_regulator_put.part.0+0x14c/0x158
regulator_put+0x34/0x48
devm_regulator_release+0x10/0x18
release_nodes+0x38/0x60
devres_release_all+0x88/0xd0
really_probe+0xd0/0x2e8
__driver_probe_device+0x74/0xd8
driver_probe_device+0x7c/0x108
__device_attach_driver+0x8c/0xd0
bus_for_each_drv+0x74/0xc0
__device_attach_async_helper+0xb4/0xd8
async_run_entry_fn+0x30/0x100
process_one_work+0x19c/0x320
worker_thread+0x48/0x418
kthread+0x14c/0x158
ret_from_fork+0x10/0x18
---[ end trace 3664ca4a50ce849b ]---
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index d3479f646c4f..1729a77caffd 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -853,6 +853,8 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
imx6_pcie_reset_phy(imx6_pcie);
+ if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0)
+ regulator_disable(imx6_pcie->vpcie);
return ret;
}
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 4/5] PCI: imx6: Fix the clock reference handling unbalance when link never came up
2021-09-13 5:41 [PATCH v2 0/5] PCI: imx6: refine codes and add compliance tests mode support Richard Zhu
` (2 preceding siblings ...)
2021-09-13 5:41 ` [PATCH v2 3/5] PCI: imx6: Fix the regulator dump when link never came up Richard Zhu
@ 2021-09-13 5:41 ` Richard Zhu
2021-09-13 5:41 ` [PATCH v2 5/5] PCI: imx6: Add the compliance tests mode support Richard Zhu
4 siblings, 0 replies; 6+ messages in thread
From: Richard Zhu @ 2021-09-13 5:41 UTC (permalink / raw)
To: l.stach, bhelgaas, lorenzo.pieralisi
Cc: linux-pci, linux-imx, linux-arm-kernel, linux-kernel, kernel,
Richard Zhu
When link never came up, driver probe would be failed with error -110.
To keep usage counter balance of the clocks, disable the previous
enabled clocks when link is down.
Move definitions of the imx6_pcie_clk_disable() function to the proper
place. Because it wouldn't be used in imx6_pcie_suspend_noirq() only.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 47 ++++++++++++++-------------
1 file changed, 24 insertions(+), 23 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 1729a77caffd..ab292d9cd528 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -514,6 +514,29 @@ static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie)
return ret;
}
+static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
+{
+ clk_disable_unprepare(imx6_pcie->pcie);
+ clk_disable_unprepare(imx6_pcie->pcie_phy);
+ clk_disable_unprepare(imx6_pcie->pcie_bus);
+
+ switch (imx6_pcie->drvdata->variant) {
+ case IMX6SX:
+ clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
+ break;
+ case IMX7D:
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
+ IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
+ break;
+ case IMX8MQ:
+ clk_disable_unprepare(imx6_pcie->pcie_aux);
+ break;
+ default:
+ break;
+ }
+}
+
static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
{
u32 val;
@@ -853,6 +876,7 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
imx6_pcie_reset_phy(imx6_pcie);
+ imx6_pcie_clk_disable(imx6_pcie);
if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0)
regulator_disable(imx6_pcie->vpcie);
return ret;
@@ -941,29 +965,6 @@ static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
usleep_range(1000, 10000);
}
-static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
-{
- clk_disable_unprepare(imx6_pcie->pcie);
- clk_disable_unprepare(imx6_pcie->pcie_phy);
- clk_disable_unprepare(imx6_pcie->pcie_bus);
-
- switch (imx6_pcie->drvdata->variant) {
- case IMX6SX:
- clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
- break;
- case IMX7D:
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
- IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
- IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
- break;
- case IMX8MQ:
- clk_disable_unprepare(imx6_pcie->pcie_aux);
- break;
- default:
- break;
- }
-}
-
static int imx6_pcie_suspend_noirq(struct device *dev)
{
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 5/5] PCI: imx6: Add the compliance tests mode support
2021-09-13 5:41 [PATCH v2 0/5] PCI: imx6: refine codes and add compliance tests mode support Richard Zhu
` (3 preceding siblings ...)
2021-09-13 5:41 ` [PATCH v2 4/5] PCI: imx6: Fix the clock reference handling unbalance " Richard Zhu
@ 2021-09-13 5:41 ` Richard Zhu
4 siblings, 0 replies; 6+ messages in thread
From: Richard Zhu @ 2021-09-13 5:41 UTC (permalink / raw)
To: l.stach, bhelgaas, lorenzo.pieralisi
Cc: linux-pci, linux-imx, linux-arm-kernel, linux-kernel, kernel,
Richard Zhu
Refer to the system board signal Quality of PCIe archiecture PHY test
specification. Signal quality tests(for example: jitters, differential
eye opening and so on ) can be executed with devices in the
polling.compliance state.
To let the device support polling.compliance stat, the clocks and powers
shouldn't be turned off when the probe of device driver is failed.
Based on CLB(Compliance Load Board) Test Fixture and so on test
equipments, the PHY link would be down during the compliance tests.
Refer to this scenario, add the i.MX PCIe compliance tests mode enable
support, and keep the clocks and powers on, and finish the driver probe
without error return.
Use the "pci_imx6.compliance=1" in kernel command line to enable the
compliance tests mode.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 32 ++++++++++++++++++++-------
1 file changed, 24 insertions(+), 8 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index ab292d9cd528..39b6fe93f5e5 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -143,6 +143,10 @@ struct imx6_pcie {
#define PHY_RX_OVRD_IN_LO_RX_DATA_EN BIT(5)
#define PHY_RX_OVRD_IN_LO_RX_PLL_EN BIT(3)
+static bool imx6_pcie_cmp_mode;
+module_param_named(compliance, imx6_pcie_cmp_mode, bool, 0644);
+MODULE_PARM_DESC(compliance, "i.MX PCIe compliance test mode (1=compliance test mode enabled)");
+
static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, bool exp_val)
{
struct dw_pcie *pci = imx6_pcie->pci;
@@ -812,10 +816,12 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
* started in Gen2 mode, there is a possibility the devices on the
* bus will not be detected at all. This happens with PCIe switches.
*/
- tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
- tmp &= ~PCI_EXP_LNKCAP_SLS;
- tmp |= PCI_EXP_LNKCAP_SLS_2_5GB;
- dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
+ if (!imx6_pcie_cmp_mode) {
+ tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
+ tmp &= ~PCI_EXP_LNKCAP_SLS;
+ tmp |= PCI_EXP_LNKCAP_SLS_2_5GB;
+ dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
+ }
/* Start LTSSM. */
imx6_pcie_ltssm_enable(dev);
@@ -876,9 +882,12 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
imx6_pcie_reset_phy(imx6_pcie);
- imx6_pcie_clk_disable(imx6_pcie);
- if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0)
- regulator_disable(imx6_pcie->vpcie);
+ if (!imx6_pcie_cmp_mode) {
+ imx6_pcie_clk_disable(imx6_pcie);
+ if (imx6_pcie->vpcie
+ && regulator_is_enabled(imx6_pcie->vpcie) > 0)
+ regulator_disable(imx6_pcie->vpcie);
+ }
return ret;
}
@@ -1183,8 +1192,15 @@ static int imx6_pcie_probe(struct platform_device *pdev)
return ret;
ret = dw_pcie_host_init(&pci->pp);
- if (ret < 0)
+ if (ret < 0) {
+ if (imx6_pcie_cmp_mode) {
+ dev_info(dev, "Driver loaded with compliance test mode enabled.\n");
+ ret = 0;
+ } else {
+ dev_err(dev, "Unable to add pcie port.\n");
+ }
return ret;
+ }
if (pci_msi_enabled()) {
u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI);
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-09-13 6:04 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-13 5:41 [PATCH v2 0/5] PCI: imx6: refine codes and add compliance tests mode support Richard Zhu
2021-09-13 5:41 ` [PATCH v2 1/5] PCI: imx6: Encapsulate the clock enable into one standalone function Richard Zhu
2021-09-13 5:41 ` [PATCH v2 2/5] PCI: imx6: Add the error propagation from host_init Richard Zhu
2021-09-13 5:41 ` [PATCH v2 3/5] PCI: imx6: Fix the regulator dump when link never came up Richard Zhu
2021-09-13 5:41 ` [PATCH v2 4/5] PCI: imx6: Fix the clock reference handling unbalance " Richard Zhu
2021-09-13 5:41 ` [PATCH v2 5/5] PCI: imx6: Add the compliance tests mode support Richard Zhu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).