* [PATCH v3] phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()
@ 2022-09-05 2:23 Richard Zhu
2022-09-29 8:57 ` Lorenzo Pieralisi
2022-09-29 10:28 ` Lorenzo Pieralisi
0 siblings, 2 replies; 3+ messages in thread
From: Richard Zhu @ 2022-09-05 2:23 UTC (permalink / raw)
To: a.fatoum, l.stach, bhelgaas, lorenzo.pieralisi, vkoul,
marcel.ziswiler, kishon
Cc: hongxing.zhu, linux-phy, linux-pci, linux-arm-kernel,
linux-kernel, kernel, linux-imx
Refer to phy_core driver, phy_init() must be called before phy_power_on().
Fix the wrong order of phy_init() and phy_power_on() here.
Fixes: 1aa97b002258 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
drivers/pci/controller/dwc/pci-imx6.c | 6 +++---
drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 8 ++++----
2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 6e5debdbc55b..b5f0de455a7b 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -935,7 +935,7 @@ static int imx6_pcie_host_init(struct dw_pcie_rp *pp)
}
if (imx6_pcie->phy) {
- ret = phy_power_on(imx6_pcie->phy);
+ ret = phy_init(imx6_pcie->phy);
if (ret) {
dev_err(dev, "pcie PHY power up failed\n");
goto err_clk_disable;
@@ -949,7 +949,7 @@ static int imx6_pcie_host_init(struct dw_pcie_rp *pp)
}
if (imx6_pcie->phy) {
- ret = phy_init(imx6_pcie->phy);
+ ret = phy_power_on(imx6_pcie->phy);
if (ret) {
dev_err(dev, "waiting for PHY ready timeout!\n");
goto err_phy_off;
@@ -961,7 +961,7 @@ static int imx6_pcie_host_init(struct dw_pcie_rp *pp)
err_phy_off:
if (imx6_pcie->phy)
- phy_power_off(imx6_pcie->phy);
+ phy_exit(imx6_pcie->phy);
err_clk_disable:
imx6_pcie_clk_disable(imx6_pcie);
err_reg_disable:
diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
index ad7d2edfc414..c93286483b42 100644
--- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
+++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
@@ -59,7 +59,7 @@ struct imx8_pcie_phy {
bool clkreq_unused;
};
-static int imx8_pcie_phy_init(struct phy *phy)
+static int imx8_pcie_phy_power_on(struct phy *phy)
{
int ret;
u32 val, pad_mode;
@@ -137,14 +137,14 @@ static int imx8_pcie_phy_init(struct phy *phy)
return ret;
}
-static int imx8_pcie_phy_power_on(struct phy *phy)
+static int imx8_pcie_phy_init(struct phy *phy)
{
struct imx8_pcie_phy *imx8_phy = phy_get_drvdata(phy);
return clk_prepare_enable(imx8_phy->clk);
}
-static int imx8_pcie_phy_power_off(struct phy *phy)
+static int imx8_pcie_phy_exit(struct phy *phy)
{
struct imx8_pcie_phy *imx8_phy = phy_get_drvdata(phy);
@@ -155,8 +155,8 @@ static int imx8_pcie_phy_power_off(struct phy *phy)
static const struct phy_ops imx8_pcie_phy_ops = {
.init = imx8_pcie_phy_init,
+ .exit = imx8_pcie_phy_exit,
.power_on = imx8_pcie_phy_power_on,
- .power_off = imx8_pcie_phy_power_off,
.owner = THIS_MODULE,
};
--
2.25.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH v3] phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()
2022-09-05 2:23 [PATCH v3] phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on() Richard Zhu
@ 2022-09-29 8:57 ` Lorenzo Pieralisi
2022-09-29 10:28 ` Lorenzo Pieralisi
1 sibling, 0 replies; 3+ messages in thread
From: Lorenzo Pieralisi @ 2022-09-29 8:57 UTC (permalink / raw)
To: Richard Zhu
Cc: a.fatoum, l.stach, bhelgaas, lorenzo.pieralisi, vkoul,
marcel.ziswiler, kishon, linux-phy, linux-pci, linux-arm-kernel,
linux-kernel, kernel, linux-imx
On Mon, Sep 05, 2022 at 10:23:03AM +0800, Richard Zhu wrote:
> Refer to phy_core driver, phy_init() must be called before phy_power_on().
> Fix the wrong order of phy_init() and phy_power_on() here.
>
> Fixes: 1aa97b002258 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver")
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> Acked-by: Vinod Koul <vkoul@kernel.org>
> ---
> drivers/pci/controller/dwc/pci-imx6.c | 6 +++---
> drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 8 ++++----
> 2 files changed, 7 insertions(+), 7 deletions(-)
Who is picking this up ? I believe this is supposed to
go via the PHY tree, so:
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 6e5debdbc55b..b5f0de455a7b 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -935,7 +935,7 @@ static int imx6_pcie_host_init(struct dw_pcie_rp *pp)
> }
>
> if (imx6_pcie->phy) {
> - ret = phy_power_on(imx6_pcie->phy);
> + ret = phy_init(imx6_pcie->phy);
> if (ret) {
> dev_err(dev, "pcie PHY power up failed\n");
> goto err_clk_disable;
> @@ -949,7 +949,7 @@ static int imx6_pcie_host_init(struct dw_pcie_rp *pp)
> }
>
> if (imx6_pcie->phy) {
> - ret = phy_init(imx6_pcie->phy);
> + ret = phy_power_on(imx6_pcie->phy);
> if (ret) {
> dev_err(dev, "waiting for PHY ready timeout!\n");
> goto err_phy_off;
> @@ -961,7 +961,7 @@ static int imx6_pcie_host_init(struct dw_pcie_rp *pp)
>
> err_phy_off:
> if (imx6_pcie->phy)
> - phy_power_off(imx6_pcie->phy);
> + phy_exit(imx6_pcie->phy);
> err_clk_disable:
> imx6_pcie_clk_disable(imx6_pcie);
> err_reg_disable:
> diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> index ad7d2edfc414..c93286483b42 100644
> --- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> +++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> @@ -59,7 +59,7 @@ struct imx8_pcie_phy {
> bool clkreq_unused;
> };
>
> -static int imx8_pcie_phy_init(struct phy *phy)
> +static int imx8_pcie_phy_power_on(struct phy *phy)
> {
> int ret;
> u32 val, pad_mode;
> @@ -137,14 +137,14 @@ static int imx8_pcie_phy_init(struct phy *phy)
> return ret;
> }
>
> -static int imx8_pcie_phy_power_on(struct phy *phy)
> +static int imx8_pcie_phy_init(struct phy *phy)
> {
> struct imx8_pcie_phy *imx8_phy = phy_get_drvdata(phy);
>
> return clk_prepare_enable(imx8_phy->clk);
> }
>
> -static int imx8_pcie_phy_power_off(struct phy *phy)
> +static int imx8_pcie_phy_exit(struct phy *phy)
> {
> struct imx8_pcie_phy *imx8_phy = phy_get_drvdata(phy);
>
> @@ -155,8 +155,8 @@ static int imx8_pcie_phy_power_off(struct phy *phy)
>
> static const struct phy_ops imx8_pcie_phy_ops = {
> .init = imx8_pcie_phy_init,
> + .exit = imx8_pcie_phy_exit,
> .power_on = imx8_pcie_phy_power_on,
> - .power_off = imx8_pcie_phy_power_off,
> .owner = THIS_MODULE,
> };
>
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v3] phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()
2022-09-05 2:23 [PATCH v3] phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on() Richard Zhu
2022-09-29 8:57 ` Lorenzo Pieralisi
@ 2022-09-29 10:28 ` Lorenzo Pieralisi
1 sibling, 0 replies; 3+ messages in thread
From: Lorenzo Pieralisi @ 2022-09-29 10:28 UTC (permalink / raw)
To: kishon, Lorenzo Pieralisi, a.fatoum, marcel.ziswiler, vkoul,
l.stach, Richard Zhu, bhelgaas
Cc: linux-pci, kernel, linux-imx, linux-arm-kernel, linux-kernel, linux-phy
On Mon, 5 Sep 2022 10:23:03 +0800, Richard Zhu wrote:
> Refer to phy_core driver, phy_init() must be called before phy_power_on().
> Fix the wrong order of phy_init() and phy_power_on() here.
>
>
Applied to pci/dwc, thanks!
[1/1] phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()
https://git.kernel.org/lpieralisi/pci/c/2810b99c95b1
Thanks,
Lorenzo
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-09-29 10:28 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-05 2:23 [PATCH v3] phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on() Richard Zhu
2022-09-29 8:57 ` Lorenzo Pieralisi
2022-09-29 10:28 ` Lorenzo Pieralisi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).