* [PATCH] PCI: Disable IOV before pcibios_sriov_disable() @ 2017-02-27 0:18 Gavin Shan 2017-03-07 20:15 ` Bjorn Helgaas 0 siblings, 1 reply; 11+ messages in thread From: Gavin Shan @ 2017-02-27 0:18 UTC (permalink / raw) To: linux-pci; +Cc: bhelgaas, clsoto, Gavin Shan The PowerNV platform is the only user of pcibios_sriov_disable(). The IOV BAR could be shifted by pci_iov_update_resource(). The warning message in the function is printed if the IOV capability is in enabled (PCI_SRIOV_CTRL_VFE && PCI_SRIOV_CTRL_MSE) state. pci_disable_sriov sriov_disable pnv_pci_sriov_disable pnv_pci_vf_resource_shift pci_update_resource pci_iov_update_resource This fixes the issue by disabling IOV capability before calling pcibios_sriov_disable(). With it, the disabling path matches with the enabling path: pcibios_sriov_enable() is called before the IOV capability is enabled. Reported-by: Carol L Soto <clsoto@us.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Tested-by: Carol L Soto <clsoto@us.ibm.com> --- drivers/pci/iov.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c index 2479ae8..138830f 100644 --- a/drivers/pci/iov.c +++ b/drivers/pci/iov.c @@ -331,7 +331,6 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn) while (i--) pci_iov_remove_virtfn(dev, i, 0); - pcibios_sriov_disable(dev); err_pcibios: iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE); pci_cfg_access_lock(dev); @@ -339,6 +338,8 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn) ssleep(1); pci_cfg_access_unlock(dev); + pcibios_sriov_disable(dev); + if (iov->link != dev->devfn) sysfs_remove_link(&dev->dev.kobj, "dep_link"); @@ -357,14 +358,14 @@ static void sriov_disable(struct pci_dev *dev) for (i = 0; i < iov->num_VFs; i++) pci_iov_remove_virtfn(dev, i, 0); - pcibios_sriov_disable(dev); - iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE); pci_cfg_access_lock(dev); pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl); ssleep(1); pci_cfg_access_unlock(dev); + pcibios_sriov_disable(dev); + if (iov->link != dev->devfn) sysfs_remove_link(&dev->dev.kobj, "dep_link"); -- 2.7.4 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH] PCI: Disable IOV before pcibios_sriov_disable() 2017-02-27 0:18 [PATCH] PCI: Disable IOV before pcibios_sriov_disable() Gavin Shan @ 2017-03-07 20:15 ` Bjorn Helgaas 2017-03-09 0:34 ` Gavin Shan 0 siblings, 1 reply; 11+ messages in thread From: Bjorn Helgaas @ 2017-03-07 20:15 UTC (permalink / raw) To: Gavin Shan; +Cc: linux-pci, bhelgaas, clsoto Hi Gavin, On Mon, Feb 27, 2017 at 11:18:32AM +1100, Gavin Shan wrote: > The PowerNV platform is the only user of pcibios_sriov_disable(). > The IOV BAR could be shifted by pci_iov_update_resource(). The > warning message in the function is printed if the IOV capability > is in enabled (PCI_SRIOV_CTRL_VFE && PCI_SRIOV_CTRL_MSE) state. > > pci_disable_sriov > sriov_disable > pnv_pci_sriov_disable > pnv_pci_vf_resource_shift > pci_update_resource > pci_iov_update_resource > > This fixes the issue by disabling IOV capability before calling > pcibios_sriov_disable(). With it, the disabling path matches with > the enabling path: pcibios_sriov_enable() is called before the > IOV capability is enabled. I'm vaguely uncomfortable about this path: pci_disable_sriov sriov_disable pcibios_sriov_disable # powerpc version pnv_pci_sriov_disable pnv_pci_vf_resource_shift res = &dev->resource[i + PCI_IOV_RESOURCES] res->start += size * offset pci_update_resource pci_iov_update_resource pnv_pci_vf_release_m64 1) "res" is already in the resource tree, so we shouldn't be changing its start address, because that may make the tree inconsistent, e.g., the resource may no longer be completely contained in its parent, it may conflict with a sibling, etc. 2) If we update "res->start", shouldn't we update "res->end" correspondingly? It seems like it'd be better if we didn't update the device resources in the enable/disable paths. If we could do the resource adjustments earlier, somewhere before we give the device to a driver, it seems like it would avoid these issues. We might have talked about these questions in the past, so I apologize if you've already explained this. If that's the case, maybe we just need some comments in the code to help the next confused reader. > Reported-by: Carol L Soto <clsoto@us.ibm.com> > Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> > Tested-by: Carol L Soto <clsoto@us.ibm.com> > --- > drivers/pci/iov.c | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c > index 2479ae8..138830f 100644 > --- a/drivers/pci/iov.c > +++ b/drivers/pci/iov.c > @@ -331,7 +331,6 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn) > while (i--) > pci_iov_remove_virtfn(dev, i, 0); > > - pcibios_sriov_disable(dev); > err_pcibios: > iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE); > pci_cfg_access_lock(dev); > @@ -339,6 +338,8 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn) > ssleep(1); > pci_cfg_access_unlock(dev); > > + pcibios_sriov_disable(dev); > + > if (iov->link != dev->devfn) > sysfs_remove_link(&dev->dev.kobj, "dep_link"); > > @@ -357,14 +358,14 @@ static void sriov_disable(struct pci_dev *dev) > for (i = 0; i < iov->num_VFs; i++) > pci_iov_remove_virtfn(dev, i, 0); > > - pcibios_sriov_disable(dev); > - > iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE); > pci_cfg_access_lock(dev); > pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl); > ssleep(1); > pci_cfg_access_unlock(dev); > > + pcibios_sriov_disable(dev); > + > if (iov->link != dev->devfn) > sysfs_remove_link(&dev->dev.kobj, "dep_link"); > > -- > 2.7.4 > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] PCI: Disable IOV before pcibios_sriov_disable() 2017-03-07 20:15 ` Bjorn Helgaas @ 2017-03-09 0:34 ` Gavin Shan 2017-03-18 0:19 ` Gavin Shan 0 siblings, 1 reply; 11+ messages in thread From: Gavin Shan @ 2017-03-09 0:34 UTC (permalink / raw) To: Bjorn Helgaas; +Cc: Gavin Shan, linux-pci, bhelgaas, clsoto On Tue, Mar 07, 2017 at 02:15:29PM -0600, Bjorn Helgaas wrote: >On Mon, Feb 27, 2017 at 11:18:32AM +1100, Gavin Shan wrote: >> The PowerNV platform is the only user of pcibios_sriov_disable(). >> The IOV BAR could be shifted by pci_iov_update_resource(). The >> warning message in the function is printed if the IOV capability >> is in enabled (PCI_SRIOV_CTRL_VFE && PCI_SRIOV_CTRL_MSE) state. >> >> pci_disable_sriov >> sriov_disable >> pnv_pci_sriov_disable >> pnv_pci_vf_resource_shift >> pci_update_resource >> pci_iov_update_resource >> >> This fixes the issue by disabling IOV capability before calling >> pcibios_sriov_disable(). With it, the disabling path matches with >> the enabling path: pcibios_sriov_enable() is called before the >> IOV capability is enabled. > >I'm vaguely uncomfortable about this path: > > pci_disable_sriov > sriov_disable > pcibios_sriov_disable # powerpc version > pnv_pci_sriov_disable > pnv_pci_vf_resource_shift > res = &dev->resource[i + PCI_IOV_RESOURCES] > res->start += size * offset > pci_update_resource > pci_iov_update_resource > pnv_pci_vf_release_m64 > >1) "res" is already in the resource tree, so we shouldn't be changing > its start address, because that may make the tree inconsistent, > e.g., the resource may no longer be completely contained in its > parent, it may conflict with a sibling, etc. > >2) If we update "res->start", shouldn't we update "res->end" > correspondingly? > >It seems like it'd be better if we didn't update the device resources >in the enable/disable paths. If we could do the resource adjustments >earlier, somewhere before we give the device to a driver, it seems >like it would avoid these issues. > >We might have talked about these questions in the past, so I apologize >if you've already explained this. If that's the case, maybe we just >need some comments in the code to help the next confused reader. > Bjorn, thanks for review. I agree it's not perfect. We discussed this long time ago as I can remember. Let me try to make it a bit more clear: In our PHB hardware, there are 16 MMIO BARs. Each of them can be shared by 256 PEs (A) and owned exclusively by one PE (B). When VF BAR size is small enough, we take (A). Otherwise, we have to take (B). Only when taking (A), we need expand/move/shrink the IOV BAR. So lets stick to (A) for discussion here. Under (A), PF's IOV BAR size is extended to ((256 * (VF BAR size)) when the PF is probed. Then the @res, which corresponds to the IOV BAR, is assigned and put into the resource tree during resource sizing and assignment stage. The IOV capability is going to be enabled by PF's driver or sysfs entry, it calls into pnv_pci_sriov_enable() where number of contigous PEs (equal to number of VFs to be enabled) are allocated. We shift the IOV BAR base according to the starting PE number of the allocated block. Afterewards, the IOV BAR is restored when the IOV capability is disabled. So it's all about the PE. The IOV BAR's end address isn't touched, we needn't update @res->end when restoring the IOV BAR. In order to avoid moving IOV BAR base address, I need know the the PEs for the VFs before resourcd sizing and assignment stage. It means I need to reserve PEs in advance, which isn't nice because we never enable the VFs. In that case, the PEs are wasted. Yeah, it's nice to have add some comments in pnv_pci_vf_resource_shift() where pci_update_resource() is called. I will post another patch to linux-ppcdev and you'll be copied. If you agree, I think you can merge this patch as none of the concerns are too much related. Thanks, Gavin ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] PCI: Disable IOV before pcibios_sriov_disable() 2017-03-09 0:34 ` Gavin Shan @ 2017-03-18 0:19 ` Gavin Shan 2017-03-20 15:46 ` Bjorn Helgaas 0 siblings, 1 reply; 11+ messages in thread From: Gavin Shan @ 2017-03-18 0:19 UTC (permalink / raw) To: Gavin Shan; +Cc: Bjorn Helgaas, linux-pci, bhelgaas, clsoto On Thu, Mar 09, 2017 at 11:34:32AM +1100, Gavin Shan wrote: >On Tue, Mar 07, 2017 at 02:15:29PM -0600, Bjorn Helgaas wrote: >>On Mon, Feb 27, 2017 at 11:18:32AM +1100, Gavin Shan wrote: >>> The PowerNV platform is the only user of pcibios_sriov_disable(). >>> The IOV BAR could be shifted by pci_iov_update_resource(). The >>> warning message in the function is printed if the IOV capability >>> is in enabled (PCI_SRIOV_CTRL_VFE && PCI_SRIOV_CTRL_MSE) state. >>> >>> pci_disable_sriov >>> sriov_disable >>> pnv_pci_sriov_disable >>> pnv_pci_vf_resource_shift >>> pci_update_resource >>> pci_iov_update_resource >>> >>> This fixes the issue by disabling IOV capability before calling >>> pcibios_sriov_disable(). With it, the disabling path matches with >>> the enabling path: pcibios_sriov_enable() is called before the >>> IOV capability is enabled. >> >>I'm vaguely uncomfortable about this path: >> >> pci_disable_sriov >> sriov_disable >> pcibios_sriov_disable # powerpc version >> pnv_pci_sriov_disable >> pnv_pci_vf_resource_shift >> res = &dev->resource[i + PCI_IOV_RESOURCES] >> res->start += size * offset >> pci_update_resource >> pci_iov_update_resource >> pnv_pci_vf_release_m64 >> >>1) "res" is already in the resource tree, so we shouldn't be changing >> its start address, because that may make the tree inconsistent, >> e.g., the resource may no longer be completely contained in its >> parent, it may conflict with a sibling, etc. >> >>2) If we update "res->start", shouldn't we update "res->end" >> correspondingly? >> >>It seems like it'd be better if we didn't update the device resources >>in the enable/disable paths. If we could do the resource adjustments >>earlier, somewhere before we give the device to a driver, it seems >>like it would avoid these issues. >> >>We might have talked about these questions in the past, so I apologize >>if you've already explained this. If that's the case, maybe we just >>need some comments in the code to help the next confused reader. >> > >Bjorn, thanks for review. I agree it's not perfect. We discussed this long >time ago as I can remember. Let me try to make it a bit more clear: In our >PHB hardware, there are 16 MMIO BARs. Each of them can be shared by 256 PEs >(A) and owned exclusively by one PE (B). When VF BAR size is small enough, >we take (A). Otherwise, we have to take (B). Only when taking (A), we need >expand/move/shrink the IOV BAR. So lets stick to (A) for discussion here. > >Under (A), PF's IOV BAR size is extended to ((256 * (VF BAR size)) when the >PF is probed. Then the @res, which corresponds to the IOV BAR, is assigned >and put into the resource tree during resource sizing and assignment stage. >The IOV capability is going to be enabled by PF's driver or sysfs entry, it >calls into pnv_pci_sriov_enable() where number of contigous PEs (equal to >number of VFs to be enabled) are allocated. We shift the IOV BAR base according >to the starting PE number of the allocated block. Afterewards, the IOV BAR >is restored when the IOV capability is disabled. So it's all about the PE. >The IOV BAR's end address isn't touched, we needn't update @res->end when >restoring the IOV BAR. > >In order to avoid moving IOV BAR base address, I need know the the PEs >for the VFs before resourcd sizing and assignment stage. It means I need >to reserve PEs in advance, which isn't nice because we never enable the >VFs. In that case, the PEs are wasted. > >Yeah, it's nice to have add some comments in pnv_pci_vf_resource_shift() >where pci_update_resource() is called. I will post another patch to >linux-ppcdev and you'll be copied. If you agree, I think you can merge >this patch as none of the concerns are too much related. > Sorry, Bjorn, ping! Please let me know if there are more concerns you have. Thanks, Gavin ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] PCI: Disable IOV before pcibios_sriov_disable() 2017-03-18 0:19 ` Gavin Shan @ 2017-03-20 15:46 ` Bjorn Helgaas 2017-03-20 22:50 ` Gavin Shan 0 siblings, 1 reply; 11+ messages in thread From: Bjorn Helgaas @ 2017-03-20 15:46 UTC (permalink / raw) To: Gavin Shan; +Cc: linux-pci, bhelgaas, clsoto On Sat, Mar 18, 2017 at 11:19:07AM +1100, Gavin Shan wrote: > On Thu, Mar 09, 2017 at 11:34:32AM +1100, Gavin Shan wrote: > >On Tue, Mar 07, 2017 at 02:15:29PM -0600, Bjorn Helgaas wrote: > >>On Mon, Feb 27, 2017 at 11:18:32AM +1100, Gavin Shan wrote: > >>> The PowerNV platform is the only user of pcibios_sriov_disable(). > >>> The IOV BAR could be shifted by pci_iov_update_resource(). The > >>> warning message in the function is printed if the IOV capability > >>> is in enabled (PCI_SRIOV_CTRL_VFE && PCI_SRIOV_CTRL_MSE) state. > >>> > >>> pci_disable_sriov > >>> sriov_disable > >>> pnv_pci_sriov_disable > >>> pnv_pci_vf_resource_shift > >>> pci_update_resource > >>> pci_iov_update_resource > >>> > >>> This fixes the issue by disabling IOV capability before calling > >>> pcibios_sriov_disable(). With it, the disabling path matches with > >>> the enabling path: pcibios_sriov_enable() is called before the > >>> IOV capability is enabled. > >> > >>I'm vaguely uncomfortable about this path: > >> > >> pci_disable_sriov > >> sriov_disable > >> pcibios_sriov_disable # powerpc version > >> pnv_pci_sriov_disable > >> pnv_pci_vf_resource_shift > >> res = &dev->resource[i + PCI_IOV_RESOURCES] > >> res->start += size * offset > >> pci_update_resource > >> pci_iov_update_resource > >> pnv_pci_vf_release_m64 > >> > >>1) "res" is already in the resource tree, so we shouldn't be changing > >> its start address, because that may make the tree inconsistent, > >> e.g., the resource may no longer be completely contained in its > >> parent, it may conflict with a sibling, etc. > >> > >>2) If we update "res->start", shouldn't we update "res->end" > >> correspondingly? > >> > >>It seems like it'd be better if we didn't update the device resources > >>in the enable/disable paths. If we could do the resource adjustments > >>earlier, somewhere before we give the device to a driver, it seems > >>like it would avoid these issues. > >> > >>We might have talked about these questions in the past, so I apologize > >>if you've already explained this. If that's the case, maybe we just > >>need some comments in the code to help the next confused reader. > >> > > > >Bjorn, thanks for review. I agree it's not perfect. We discussed this long > >time ago as I can remember. Let me try to make it a bit more clear: In our > >PHB hardware, there are 16 MMIO BARs. Each of them can be shared by 256 PEs > >(A) and owned exclusively by one PE (B). When VF BAR size is small enough, > >we take (A). Otherwise, we have to take (B). Only when taking (A), we need > >expand/move/shrink the IOV BAR. So lets stick to (A) for discussion here. > > > >Under (A), PF's IOV BAR size is extended to ((256 * (VF BAR size)) when the > >PF is probed. Then the @res, which corresponds to the IOV BAR, is assigned > >and put into the resource tree during resource sizing and assignment stage. > >The IOV capability is going to be enabled by PF's driver or sysfs entry, it > >calls into pnv_pci_sriov_enable() where number of contigous PEs (equal to > >number of VFs to be enabled) are allocated. We shift the IOV BAR base according > >to the starting PE number of the allocated block. Afterewards, the IOV BAR > >is restored when the IOV capability is disabled. So it's all about the PE. > >The IOV BAR's end address isn't touched, we needn't update @res->end when > >restoring the IOV BAR. > > > >In order to avoid moving IOV BAR base address, I need know the the PEs > >for the VFs before resourcd sizing and assignment stage. It means I need > >to reserve PEs in advance, which isn't nice because we never enable the > >VFs. In that case, the PEs are wasted. > > > >Yeah, it's nice to have add some comments in pnv_pci_vf_resource_shift() > >where pci_update_resource() is called. I will post another patch to > >linux-ppcdev and you'll be copied. If you agree, I think you can merge > >this patch as none of the concerns are too much related. > > > > Sorry, Bjorn, ping! Please let me know if there are more concerns you have. I think we had a misunderstanding -- you mentioned adding some comments and wrote "I will post another patch", and I *thought* you meant you were going to post another version of *this* patch with some updated comments. So I've been waiting for that updated patch. But I think you've been waiting for me to merge *this* patch as-is. To avoid having this discussion a third time in the future, I think you should add some comments at the point where you update the resource. Updating a resource after it's in the resource tree is clearly dangerous, so we need some explanation of why it's sort of OK in this particular case. If you can write a comment and dig up a URL to our previous discussion, I'd like to incorporate that into *this* patch before I merge it. The sooner we can document this, the less work it will be in the future. Bjorn ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] PCI: Disable IOV before pcibios_sriov_disable() 2017-03-20 15:46 ` Bjorn Helgaas @ 2017-03-20 22:50 ` Gavin Shan 2017-03-30 23:24 ` Gavin Shan 0 siblings, 1 reply; 11+ messages in thread From: Gavin Shan @ 2017-03-20 22:50 UTC (permalink / raw) To: Bjorn Helgaas; +Cc: Gavin Shan, linux-pci, bhelgaas, clsoto On Mon, Mar 20, 2017 at 10:46:44AM -0500, Bjorn Helgaas wrote: >On Sat, Mar 18, 2017 at 11:19:07AM +1100, Gavin Shan wrote: >> On Thu, Mar 09, 2017 at 11:34:32AM +1100, Gavin Shan wrote: >> >On Tue, Mar 07, 2017 at 02:15:29PM -0600, Bjorn Helgaas wrote: >> >>On Mon, Feb 27, 2017 at 11:18:32AM +1100, Gavin Shan wrote: >> >>> The PowerNV platform is the only user of pcibios_sriov_disable(). >> >>> The IOV BAR could be shifted by pci_iov_update_resource(). The >> >>> warning message in the function is printed if the IOV capability >> >>> is in enabled (PCI_SRIOV_CTRL_VFE && PCI_SRIOV_CTRL_MSE) state. >> >>> >> >>> pci_disable_sriov >> >>> sriov_disable >> >>> pnv_pci_sriov_disable >> >>> pnv_pci_vf_resource_shift >> >>> pci_update_resource >> >>> pci_iov_update_resource >> >>> >> >>> This fixes the issue by disabling IOV capability before calling >> >>> pcibios_sriov_disable(). With it, the disabling path matches with >> >>> the enabling path: pcibios_sriov_enable() is called before the >> >>> IOV capability is enabled. >> >> >> >>I'm vaguely uncomfortable about this path: >> >> >> >> pci_disable_sriov >> >> sriov_disable >> >> pcibios_sriov_disable # powerpc version >> >> pnv_pci_sriov_disable >> >> pnv_pci_vf_resource_shift >> >> res = &dev->resource[i + PCI_IOV_RESOURCES] >> >> res->start += size * offset >> >> pci_update_resource >> >> pci_iov_update_resource >> >> pnv_pci_vf_release_m64 >> >> >> >>1) "res" is already in the resource tree, so we shouldn't be changing >> >> its start address, because that may make the tree inconsistent, >> >> e.g., the resource may no longer be completely contained in its >> >> parent, it may conflict with a sibling, etc. >> >> >> >>2) If we update "res->start", shouldn't we update "res->end" >> >> correspondingly? >> >> >> >>It seems like it'd be better if we didn't update the device resources >> >>in the enable/disable paths. If we could do the resource adjustments >> >>earlier, somewhere before we give the device to a driver, it seems >> >>like it would avoid these issues. >> >> >> >>We might have talked about these questions in the past, so I apologize >> >>if you've already explained this. If that's the case, maybe we just >> >>need some comments in the code to help the next confused reader. >> >> >> > >> >Bjorn, thanks for review. I agree it's not perfect. We discussed this long >> >time ago as I can remember. Let me try to make it a bit more clear: In our >> >PHB hardware, there are 16 MMIO BARs. Each of them can be shared by 256 PEs >> >(A) and owned exclusively by one PE (B). When VF BAR size is small enough, >> >we take (A). Otherwise, we have to take (B). Only when taking (A), we need >> >expand/move/shrink the IOV BAR. So lets stick to (A) for discussion here. >> > >> >Under (A), PF's IOV BAR size is extended to ((256 * (VF BAR size)) when the >> >PF is probed. Then the @res, which corresponds to the IOV BAR, is assigned >> >and put into the resource tree during resource sizing and assignment stage. >> >The IOV capability is going to be enabled by PF's driver or sysfs entry, it >> >calls into pnv_pci_sriov_enable() where number of contigous PEs (equal to >> >number of VFs to be enabled) are allocated. We shift the IOV BAR base according >> >to the starting PE number of the allocated block. Afterewards, the IOV BAR >> >is restored when the IOV capability is disabled. So it's all about the PE. >> >The IOV BAR's end address isn't touched, we needn't update @res->end when >> >restoring the IOV BAR. >> > >> >In order to avoid moving IOV BAR base address, I need know the the PEs >> >for the VFs before resourcd sizing and assignment stage. It means I need >> >to reserve PEs in advance, which isn't nice because we never enable the >> >VFs. In that case, the PEs are wasted. >> > >> >Yeah, it's nice to have add some comments in pnv_pci_vf_resource_shift() >> >where pci_update_resource() is called. I will post another patch to >> >linux-ppcdev and you'll be copied. If you agree, I think you can merge >> >this patch as none of the concerns are too much related. >> > >> >> Sorry, Bjorn, ping! Please let me know if there are more concerns you have. > >I think we had a misunderstanding -- you mentioned adding some >comments and wrote "I will post another patch", and I *thought* you >meant you were going to post another version of *this* patch with some >updated comments. So I've been waiting for that updated patch. But I >think you've been waiting for me to merge *this* patch as-is. > >To avoid having this discussion a third time in the future, I think >you should add some comments at the point where you update the >resource. Updating a resource after it's in the resource tree is >clearly dangerous, so we need some explanation of why it's sort of OK >in this particular case. > >If you can write a comment and dig up a URL to our previous >discussion, I'd like to incorporate that into *this* patch before I >merge it. The sooner we can document this, the less work it will be >in the future. > Ok. Sorry for the confusion and that I should looked into the code for more. We already had one comment like below in arch/powerpc/platforms/powernv/pci-ioda.c:: pnv_pci_vf_resource_shift(). I think it's exactly what you like to have, please help to confirm. I believe it was added based on your comments long time ago when you review the SRIOV (for PowerNV) patches. /* * After doing so, there would be a "hole" in the /proc/iomem when * offset is a positive value. It looks like the device return some * mmio back to the system, which actually no one could use it. */ http://www.spinics.net/lists/linux-pci/msg39424.html Thanks, Gavin ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] PCI: Disable IOV before pcibios_sriov_disable() 2017-03-20 22:50 ` Gavin Shan @ 2017-03-30 23:24 ` Gavin Shan 2017-04-13 7:53 ` Gavin Shan 0 siblings, 1 reply; 11+ messages in thread From: Gavin Shan @ 2017-03-30 23:24 UTC (permalink / raw) To: Gavin Shan; +Cc: Bjorn Helgaas, linux-pci, bhelgaas, clsoto On Tue, Mar 21, 2017 at 09:50:06AM +1100, Gavin Shan wrote: >On Mon, Mar 20, 2017 at 10:46:44AM -0500, Bjorn Helgaas wrote: >>On Sat, Mar 18, 2017 at 11:19:07AM +1100, Gavin Shan wrote: >>> On Thu, Mar 09, 2017 at 11:34:32AM +1100, Gavin Shan wrote: >>> >On Tue, Mar 07, 2017 at 02:15:29PM -0600, Bjorn Helgaas wrote: >>> >>On Mon, Feb 27, 2017 at 11:18:32AM +1100, Gavin Shan wrote: >>> >>> The PowerNV platform is the only user of pcibios_sriov_disable(). >>> >>> The IOV BAR could be shifted by pci_iov_update_resource(). The >>> >>> warning message in the function is printed if the IOV capability >>> >>> is in enabled (PCI_SRIOV_CTRL_VFE && PCI_SRIOV_CTRL_MSE) state. >>> >>> >>> >>> pci_disable_sriov >>> >>> sriov_disable >>> >>> pnv_pci_sriov_disable >>> >>> pnv_pci_vf_resource_shift >>> >>> pci_update_resource >>> >>> pci_iov_update_resource >>> >>> >>> >>> This fixes the issue by disabling IOV capability before calling >>> >>> pcibios_sriov_disable(). With it, the disabling path matches with >>> >>> the enabling path: pcibios_sriov_enable() is called before the >>> >>> IOV capability is enabled. >>> >> >>> >>I'm vaguely uncomfortable about this path: >>> >> >>> >> pci_disable_sriov >>> >> sriov_disable >>> >> pcibios_sriov_disable # powerpc version >>> >> pnv_pci_sriov_disable >>> >> pnv_pci_vf_resource_shift >>> >> res = &dev->resource[i + PCI_IOV_RESOURCES] >>> >> res->start += size * offset >>> >> pci_update_resource >>> >> pci_iov_update_resource >>> >> pnv_pci_vf_release_m64 >>> >> >>> >>1) "res" is already in the resource tree, so we shouldn't be changing >>> >> its start address, because that may make the tree inconsistent, >>> >> e.g., the resource may no longer be completely contained in its >>> >> parent, it may conflict with a sibling, etc. >>> >> >>> >>2) If we update "res->start", shouldn't we update "res->end" >>> >> correspondingly? >>> >> >>> >>It seems like it'd be better if we didn't update the device resources >>> >>in the enable/disable paths. If we could do the resource adjustments >>> >>earlier, somewhere before we give the device to a driver, it seems >>> >>like it would avoid these issues. >>> >> >>> >>We might have talked about these questions in the past, so I apologize >>> >>if you've already explained this. If that's the case, maybe we just >>> >>need some comments in the code to help the next confused reader. >>> >> >>> > >>> >Bjorn, thanks for review. I agree it's not perfect. We discussed this long >>> >time ago as I can remember. Let me try to make it a bit more clear: In our >>> >PHB hardware, there are 16 MMIO BARs. Each of them can be shared by 256 PEs >>> >(A) and owned exclusively by one PE (B). When VF BAR size is small enough, >>> >we take (A). Otherwise, we have to take (B). Only when taking (A), we need >>> >expand/move/shrink the IOV BAR. So lets stick to (A) for discussion here. >>> > >>> >Under (A), PF's IOV BAR size is extended to ((256 * (VF BAR size)) when the >>> >PF is probed. Then the @res, which corresponds to the IOV BAR, is assigned >>> >and put into the resource tree during resource sizing and assignment stage. >>> >The IOV capability is going to be enabled by PF's driver or sysfs entry, it >>> >calls into pnv_pci_sriov_enable() where number of contigous PEs (equal to >>> >number of VFs to be enabled) are allocated. We shift the IOV BAR base according >>> >to the starting PE number of the allocated block. Afterewards, the IOV BAR >>> >is restored when the IOV capability is disabled. So it's all about the PE. >>> >The IOV BAR's end address isn't touched, we needn't update @res->end when >>> >restoring the IOV BAR. >>> > >>> >In order to avoid moving IOV BAR base address, I need know the the PEs >>> >for the VFs before resourcd sizing and assignment stage. It means I need >>> >to reserve PEs in advance, which isn't nice because we never enable the >>> >VFs. In that case, the PEs are wasted. >>> > >>> >Yeah, it's nice to have add some comments in pnv_pci_vf_resource_shift() >>> >where pci_update_resource() is called. I will post another patch to >>> >linux-ppcdev and you'll be copied. If you agree, I think you can merge >>> >this patch as none of the concerns are too much related. >>> > >>> >>> Sorry, Bjorn, ping! Please let me know if there are more concerns you have. >> >>I think we had a misunderstanding -- you mentioned adding some >>comments and wrote "I will post another patch", and I *thought* you >>meant you were going to post another version of *this* patch with some >>updated comments. So I've been waiting for that updated patch. But I >>think you've been waiting for me to merge *this* patch as-is. >> >>To avoid having this discussion a third time in the future, I think >>you should add some comments at the point where you update the >>resource. Updating a resource after it's in the resource tree is >>clearly dangerous, so we need some explanation of why it's sort of OK >>in this particular case. >> >>If you can write a comment and dig up a URL to our previous >>discussion, I'd like to incorporate that into *this* patch before I >>merge it. The sooner we can document this, the less work it will be >>in the future. >> > >Ok. Sorry for the confusion and that I should looked into the code for more. >We already had one comment like below in arch/powerpc/platforms/powernv/pci-ioda.c:: >pnv_pci_vf_resource_shift(). I think it's exactly what you like to have, please >help to confirm. I believe it was added based on your comments long time ago when >you review the SRIOV (for PowerNV) patches. > > /* > * After doing so, there would be a "hole" in the /proc/iomem when > * offset is a positive value. It looks like the device return some > * mmio back to the system, which actually no one could use it. > */ > >http://www.spinics.net/lists/linux-pci/msg39424.html > Bjorn, please let me know if you have concerns. Thanks, Gavin ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] PCI: Disable IOV before pcibios_sriov_disable() 2017-03-30 23:24 ` Gavin Shan @ 2017-04-13 7:53 ` Gavin Shan 2017-04-13 12:27 ` Bjorn Helgaas 0 siblings, 1 reply; 11+ messages in thread From: Gavin Shan @ 2017-04-13 7:53 UTC (permalink / raw) To: Gavin Shan; +Cc: Bjorn Helgaas, linux-pci, bhelgaas, clsoto On Fri, Mar 31, 2017 at 10:24:06AM +1100, Gavin Shan wrote: >On Tue, Mar 21, 2017 at 09:50:06AM +1100, Gavin Shan wrote: >>On Mon, Mar 20, 2017 at 10:46:44AM -0500, Bjorn Helgaas wrote: >>>On Sat, Mar 18, 2017 at 11:19:07AM +1100, Gavin Shan wrote: >>>> On Thu, Mar 09, 2017 at 11:34:32AM +1100, Gavin Shan wrote: >>>> >On Tue, Mar 07, 2017 at 02:15:29PM -0600, Bjorn Helgaas wrote: >>>> >>On Mon, Feb 27, 2017 at 11:18:32AM +1100, Gavin Shan wrote: >>>> >>> The PowerNV platform is the only user of pcibios_sriov_disable(). >>>> >>> The IOV BAR could be shifted by pci_iov_update_resource(). The >>>> >>> warning message in the function is printed if the IOV capability >>>> >>> is in enabled (PCI_SRIOV_CTRL_VFE && PCI_SRIOV_CTRL_MSE) state. >>>> >>> >>>> >>> pci_disable_sriov >>>> >>> sriov_disable >>>> >>> pnv_pci_sriov_disable >>>> >>> pnv_pci_vf_resource_shift >>>> >>> pci_update_resource >>>> >>> pci_iov_update_resource >>>> >>> >>>> >>> This fixes the issue by disabling IOV capability before calling >>>> >>> pcibios_sriov_disable(). With it, the disabling path matches with >>>> >>> the enabling path: pcibios_sriov_enable() is called before the >>>> >>> IOV capability is enabled. >>>> >> >>>> >>I'm vaguely uncomfortable about this path: >>>> >> >>>> >> pci_disable_sriov >>>> >> sriov_disable >>>> >> pcibios_sriov_disable # powerpc version >>>> >> pnv_pci_sriov_disable >>>> >> pnv_pci_vf_resource_shift >>>> >> res = &dev->resource[i + PCI_IOV_RESOURCES] >>>> >> res->start += size * offset >>>> >> pci_update_resource >>>> >> pci_iov_update_resource >>>> >> pnv_pci_vf_release_m64 >>>> >> >>>> >>1) "res" is already in the resource tree, so we shouldn't be changing >>>> >> its start address, because that may make the tree inconsistent, >>>> >> e.g., the resource may no longer be completely contained in its >>>> >> parent, it may conflict with a sibling, etc. >>>> >> >>>> >>2) If we update "res->start", shouldn't we update "res->end" >>>> >> correspondingly? >>>> >> >>>> >>It seems like it'd be better if we didn't update the device resources >>>> >>in the enable/disable paths. If we could do the resource adjustments >>>> >>earlier, somewhere before we give the device to a driver, it seems >>>> >>like it would avoid these issues. >>>> >> >>>> >>We might have talked about these questions in the past, so I apologize >>>> >>if you've already explained this. If that's the case, maybe we just >>>> >>need some comments in the code to help the next confused reader. >>>> >> >>>> > >>>> >Bjorn, thanks for review. I agree it's not perfect. We discussed this long >>>> >time ago as I can remember. Let me try to make it a bit more clear: In our >>>> >PHB hardware, there are 16 MMIO BARs. Each of them can be shared by 256 PEs >>>> >(A) and owned exclusively by one PE (B). When VF BAR size is small enough, >>>> >we take (A). Otherwise, we have to take (B). Only when taking (A), we need >>>> >expand/move/shrink the IOV BAR. So lets stick to (A) for discussion here. >>>> > >>>> >Under (A), PF's IOV BAR size is extended to ((256 * (VF BAR size)) when the >>>> >PF is probed. Then the @res, which corresponds to the IOV BAR, is assigned >>>> >and put into the resource tree during resource sizing and assignment stage. >>>> >The IOV capability is going to be enabled by PF's driver or sysfs entry, it >>>> >calls into pnv_pci_sriov_enable() where number of contigous PEs (equal to >>>> >number of VFs to be enabled) are allocated. We shift the IOV BAR base according >>>> >to the starting PE number of the allocated block. Afterewards, the IOV BAR >>>> >is restored when the IOV capability is disabled. So it's all about the PE. >>>> >The IOV BAR's end address isn't touched, we needn't update @res->end when >>>> >restoring the IOV BAR. >>>> > >>>> >In order to avoid moving IOV BAR base address, I need know the the PEs >>>> >for the VFs before resourcd sizing and assignment stage. It means I need >>>> >to reserve PEs in advance, which isn't nice because we never enable the >>>> >VFs. In that case, the PEs are wasted. >>>> > >>>> >Yeah, it's nice to have add some comments in pnv_pci_vf_resource_shift() >>>> >where pci_update_resource() is called. I will post another patch to >>>> >linux-ppcdev and you'll be copied. If you agree, I think you can merge >>>> >this patch as none of the concerns are too much related. >>>> > >>>> >>>> Sorry, Bjorn, ping! Please let me know if there are more concerns you have. >>> >>>I think we had a misunderstanding -- you mentioned adding some >>>comments and wrote "I will post another patch", and I *thought* you >>>meant you were going to post another version of *this* patch with some >>>updated comments. So I've been waiting for that updated patch. But I >>>think you've been waiting for me to merge *this* patch as-is. >>> >>>To avoid having this discussion a third time in the future, I think >>>you should add some comments at the point where you update the >>>resource. Updating a resource after it's in the resource tree is >>>clearly dangerous, so we need some explanation of why it's sort of OK >>>in this particular case. >>> >>>If you can write a comment and dig up a URL to our previous >>>discussion, I'd like to incorporate that into *this* patch before I >>>merge it. The sooner we can document this, the less work it will be >>>in the future. >>> >> >>Ok. Sorry for the confusion and that I should looked into the code for more. >>We already had one comment like below in arch/powerpc/platforms/powernv/pci-ioda.c:: >>pnv_pci_vf_resource_shift(). I think it's exactly what you like to have, please >>help to confirm. I believe it was added based on your comments long time ago when >>you review the SRIOV (for PowerNV) patches. >> >> /* >> * After doing so, there would be a "hole" in the /proc/iomem when >> * offset is a positive value. It looks like the device return some >> * mmio back to the system, which actually no one could use it. >> */ >> >>http://www.spinics.net/lists/linux-pci/msg39424.html >> > >Bjorn, please let me know if you have concerns. > Bjorn, Sorry that I have to ping you again. I assume it's mergable. Please let me know if you have more concerns. Thanks, Gavin ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] PCI: Disable IOV before pcibios_sriov_disable() 2017-04-13 7:53 ` Gavin Shan @ 2017-04-13 12:27 ` Bjorn Helgaas 2017-04-18 3:51 ` Gavin Shan 0 siblings, 1 reply; 11+ messages in thread From: Bjorn Helgaas @ 2017-04-13 12:27 UTC (permalink / raw) To: Gavin Shan; +Cc: linux-pci, bhelgaas, clsoto On Thu, Apr 13, 2017 at 05:53:55PM +1000, Gavin Shan wrote: > On Fri, Mar 31, 2017 at 10:24:06AM +1100, Gavin Shan wrote: > >On Tue, Mar 21, 2017 at 09:50:06AM +1100, Gavin Shan wrote: > >>On Mon, Mar 20, 2017 at 10:46:44AM -0500, Bjorn Helgaas wrote: > >>>On Sat, Mar 18, 2017 at 11:19:07AM +1100, Gavin Shan wrote: > >>>> On Thu, Mar 09, 2017 at 11:34:32AM +1100, Gavin Shan wrote: > >>>> >On Tue, Mar 07, 2017 at 02:15:29PM -0600, Bjorn Helgaas wrote: > >>>> >>On Mon, Feb 27, 2017 at 11:18:32AM +1100, Gavin Shan wrote: > >>>> >>> The PowerNV platform is the only user of pcibios_sriov_disable(). > >>>> >>> The IOV BAR could be shifted by pci_iov_update_resource(). The > >>>> >>> warning message in the function is printed if the IOV capability > >>>> >>> is in enabled (PCI_SRIOV_CTRL_VFE && PCI_SRIOV_CTRL_MSE) state. > >>>> >>> > >>>> >>> pci_disable_sriov > >>>> >>> sriov_disable > >>>> >>> pnv_pci_sriov_disable > >>>> >>> pnv_pci_vf_resource_shift > >>>> >>> pci_update_resource > >>>> >>> pci_iov_update_resource > >>>> >>> > >>>> >>> This fixes the issue by disabling IOV capability before calling > >>>> >>> pcibios_sriov_disable(). With it, the disabling path matches with > >>>> >>> the enabling path: pcibios_sriov_enable() is called before the > >>>> >>> IOV capability is enabled. > >>>> >> > >>>> >>I'm vaguely uncomfortable about this path: > >>>> >> > >>>> >> pci_disable_sriov > >>>> >> sriov_disable > >>>> >> pcibios_sriov_disable # powerpc version > >>>> >> pnv_pci_sriov_disable > >>>> >> pnv_pci_vf_resource_shift > >>>> >> res = &dev->resource[i + PCI_IOV_RESOURCES] > >>>> >> res->start += size * offset > >>>> >> pci_update_resource > >>>> >> pci_iov_update_resource > >>>> >> pnv_pci_vf_release_m64 > >>>> >> > >>>> >>1) "res" is already in the resource tree, so we shouldn't be changing > >>>> >> its start address, because that may make the tree inconsistent, > >>>> >> e.g., the resource may no longer be completely contained in its > >>>> >> parent, it may conflict with a sibling, etc. > >>>> >> > >>>> >>2) If we update "res->start", shouldn't we update "res->end" > >>>> >> correspondingly? > >>>> >> > >>>> >>It seems like it'd be better if we didn't update the device resources > >>>> >>in the enable/disable paths. If we could do the resource adjustments > >>>> >>earlier, somewhere before we give the device to a driver, it seems > >>>> >>like it would avoid these issues. > >>>> >> > >>>> >>We might have talked about these questions in the past, so I apologize > >>>> >>if you've already explained this. If that's the case, maybe we just > >>>> >>need some comments in the code to help the next confused reader. > >>>> >> > >>>> > > >>>> >Bjorn, thanks for review. I agree it's not perfect. We discussed this long > >>>> >time ago as I can remember. Let me try to make it a bit more clear: In our > >>>> >PHB hardware, there are 16 MMIO BARs. Each of them can be shared by 256 PEs > >>>> >(A) and owned exclusively by one PE (B). When VF BAR size is small enough, > >>>> >we take (A). Otherwise, we have to take (B). Only when taking (A), we need > >>>> >expand/move/shrink the IOV BAR. So lets stick to (A) for discussion here. > >>>> > > >>>> >Under (A), PF's IOV BAR size is extended to ((256 * (VF BAR size)) when the > >>>> >PF is probed. Then the @res, which corresponds to the IOV BAR, is assigned > >>>> >and put into the resource tree during resource sizing and assignment stage. > >>>> >The IOV capability is going to be enabled by PF's driver or sysfs entry, it > >>>> >calls into pnv_pci_sriov_enable() where number of contigous PEs (equal to > >>>> >number of VFs to be enabled) are allocated. We shift the IOV BAR base according > >>>> >to the starting PE number of the allocated block. Afterewards, the IOV BAR > >>>> >is restored when the IOV capability is disabled. So it's all about the PE. > >>>> >The IOV BAR's end address isn't touched, we needn't update @res->end when > >>>> >restoring the IOV BAR. > >>>> > > >>>> >In order to avoid moving IOV BAR base address, I need know the the PEs > >>>> >for the VFs before resourcd sizing and assignment stage. It means I need > >>>> >to reserve PEs in advance, which isn't nice because we never enable the > >>>> >VFs. In that case, the PEs are wasted. > >>>> > > >>>> >Yeah, it's nice to have add some comments in pnv_pci_vf_resource_shift() > >>>> >where pci_update_resource() is called. I will post another patch to > >>>> >linux-ppcdev and you'll be copied. If you agree, I think you can merge > >>>> >this patch as none of the concerns are too much related. > >>>> > > >>>> > >>>> Sorry, Bjorn, ping! Please let me know if there are more concerns you have. > >>> > >>>I think we had a misunderstanding -- you mentioned adding some > >>>comments and wrote "I will post another patch", and I *thought* you > >>>meant you were going to post another version of *this* patch with some > >>>updated comments. So I've been waiting for that updated patch. But I > >>>think you've been waiting for me to merge *this* patch as-is. > >>> > >>>To avoid having this discussion a third time in the future, I think > >>>you should add some comments at the point where you update the > >>>resource. Updating a resource after it's in the resource tree is > >>>clearly dangerous, so we need some explanation of why it's sort of OK > >>>in this particular case. > >>> > >>>If you can write a comment and dig up a URL to our previous > >>>discussion, I'd like to incorporate that into *this* patch before I > >>>merge it. The sooner we can document this, the less work it will be > >>>in the future. > >>> > >> > >>Ok. Sorry for the confusion and that I should looked into the code for more. > >>We already had one comment like below in arch/powerpc/platforms/powernv/pci-ioda.c:: > >>pnv_pci_vf_resource_shift(). I think it's exactly what you like to have, please > >>help to confirm. I believe it was added based on your comments long time ago when > >>you review the SRIOV (for PowerNV) patches. > >> > >> /* > >> * After doing so, there would be a "hole" in the /proc/iomem when > >> * offset is a positive value. It looks like the device return some > >> * mmio back to the system, which actually no one could use it. > >> */ > >> > >>http://www.spinics.net/lists/linux-pci/msg39424.html > >> > > > >Bjorn, please let me know if you have concerns. > > > > Bjorn, Sorry that I have to ping you again. I assume it's mergable. > Please let me know if you have more concerns. I'm not going to merge this without a comment in pnv_pci_vf_resource_shift() that addresses the two questions I raised in my very first response. I don't think the existing comment about "After doing so, there would be a 'hole'" is sufficient. If it were sufficient, I wouldn't have raised the questions in the first place. The resource tree relies on properties like "the sibling list is ordered by res->start" and "a child is completely contained within its parent". pnv_pci_vf_resource_shift() does this: res->start += size * offset; That could easily break both of those properties, so you need to provide a way for a reader to verify that it actually does not break them. You can write that comment, or I can do it myself. Either way, it's going to take me a while to figure out again what's going on there because it is definitely outside the usual resource management model. Bjorn ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] PCI: Disable IOV before pcibios_sriov_disable() 2017-04-13 12:27 ` Bjorn Helgaas @ 2017-04-18 3:51 ` Gavin Shan 2017-06-18 23:39 ` Gavin Shan 0 siblings, 1 reply; 11+ messages in thread From: Gavin Shan @ 2017-04-18 3:51 UTC (permalink / raw) To: Bjorn Helgaas; +Cc: Gavin Shan, linux-pci, bhelgaas, clsoto On Thu, Apr 13, 2017 at 07:27:32AM -0500, Bjorn Helgaas wrote: >On Thu, Apr 13, 2017 at 05:53:55PM +1000, Gavin Shan wrote: >> On Fri, Mar 31, 2017 at 10:24:06AM +1100, Gavin Shan wrote: >> >On Tue, Mar 21, 2017 at 09:50:06AM +1100, Gavin Shan wrote: >> >>On Mon, Mar 20, 2017 at 10:46:44AM -0500, Bjorn Helgaas wrote: >> >>>On Sat, Mar 18, 2017 at 11:19:07AM +1100, Gavin Shan wrote: >> >>>> On Thu, Mar 09, 2017 at 11:34:32AM +1100, Gavin Shan wrote: >> >>>> >On Tue, Mar 07, 2017 at 02:15:29PM -0600, Bjorn Helgaas wrote: >> >>>> >>On Mon, Feb 27, 2017 at 11:18:32AM +1100, Gavin Shan wrote: >> >>>> >>> The PowerNV platform is the only user of pcibios_sriov_disable(). >> >>>> >>> The IOV BAR could be shifted by pci_iov_update_resource(). The >> >>>> >>> warning message in the function is printed if the IOV capability >> >>>> >>> is in enabled (PCI_SRIOV_CTRL_VFE && PCI_SRIOV_CTRL_MSE) state. >> >>>> >>> >> >>>> >>> pci_disable_sriov >> >>>> >>> sriov_disable >> >>>> >>> pnv_pci_sriov_disable >> >>>> >>> pnv_pci_vf_resource_shift >> >>>> >>> pci_update_resource >> >>>> >>> pci_iov_update_resource >> >>>> >>> >> >>>> >>> This fixes the issue by disabling IOV capability before calling >> >>>> >>> pcibios_sriov_disable(). With it, the disabling path matches with >> >>>> >>> the enabling path: pcibios_sriov_enable() is called before the >> >>>> >>> IOV capability is enabled. >> >>>> >> >> >>>> >>I'm vaguely uncomfortable about this path: >> >>>> >> >> >>>> >> pci_disable_sriov >> >>>> >> sriov_disable >> >>>> >> pcibios_sriov_disable # powerpc version >> >>>> >> pnv_pci_sriov_disable >> >>>> >> pnv_pci_vf_resource_shift >> >>>> >> res = &dev->resource[i + PCI_IOV_RESOURCES] >> >>>> >> res->start += size * offset >> >>>> >> pci_update_resource >> >>>> >> pci_iov_update_resource >> >>>> >> pnv_pci_vf_release_m64 >> >>>> >> >> >>>> >>1) "res" is already in the resource tree, so we shouldn't be changing >> >>>> >> its start address, because that may make the tree inconsistent, >> >>>> >> e.g., the resource may no longer be completely contained in its >> >>>> >> parent, it may conflict with a sibling, etc. >> >>>> >> >> >>>> >>2) If we update "res->start", shouldn't we update "res->end" >> >>>> >> correspondingly? >> >>>> >> >> >>>> >>It seems like it'd be better if we didn't update the device resources >> >>>> >>in the enable/disable paths. If we could do the resource adjustments >> >>>> >>earlier, somewhere before we give the device to a driver, it seems >> >>>> >>like it would avoid these issues. >> >>>> >> >> >>>> >>We might have talked about these questions in the past, so I apologize >> >>>> >>if you've already explained this. If that's the case, maybe we just >> >>>> >>need some comments in the code to help the next confused reader. >> >>>> >> >> >>>> > >> >>>> >Bjorn, thanks for review. I agree it's not perfect. We discussed this long >> >>>> >time ago as I can remember. Let me try to make it a bit more clear: In our >> >>>> >PHB hardware, there are 16 MMIO BARs. Each of them can be shared by 256 PEs >> >>>> >(A) and owned exclusively by one PE (B). When VF BAR size is small enough, >> >>>> >we take (A). Otherwise, we have to take (B). Only when taking (A), we need >> >>>> >expand/move/shrink the IOV BAR. So lets stick to (A) for discussion here. >> >>>> > >> >>>> >Under (A), PF's IOV BAR size is extended to ((256 * (VF BAR size)) when the >> >>>> >PF is probed. Then the @res, which corresponds to the IOV BAR, is assigned >> >>>> >and put into the resource tree during resource sizing and assignment stage. >> >>>> >The IOV capability is going to be enabled by PF's driver or sysfs entry, it >> >>>> >calls into pnv_pci_sriov_enable() where number of contigous PEs (equal to >> >>>> >number of VFs to be enabled) are allocated. We shift the IOV BAR base according >> >>>> >to the starting PE number of the allocated block. Afterewards, the IOV BAR >> >>>> >is restored when the IOV capability is disabled. So it's all about the PE. >> >>>> >The IOV BAR's end address isn't touched, we needn't update @res->end when >> >>>> >restoring the IOV BAR. >> >>>> > >> >>>> >In order to avoid moving IOV BAR base address, I need know the the PEs >> >>>> >for the VFs before resourcd sizing and assignment stage. It means I need >> >>>> >to reserve PEs in advance, which isn't nice because we never enable the >> >>>> >VFs. In that case, the PEs are wasted. >> >>>> > >> >>>> >Yeah, it's nice to have add some comments in pnv_pci_vf_resource_shift() >> >>>> >where pci_update_resource() is called. I will post another patch to >> >>>> >linux-ppcdev and you'll be copied. If you agree, I think you can merge >> >>>> >this patch as none of the concerns are too much related. >> >>>> > >> >>>> >> >>>> Sorry, Bjorn, ping! Please let me know if there are more concerns you have. >> >>> >> >>>I think we had a misunderstanding -- you mentioned adding some >> >>>comments and wrote "I will post another patch", and I *thought* you >> >>>meant you were going to post another version of *this* patch with some >> >>>updated comments. So I've been waiting for that updated patch. But I >> >>>think you've been waiting for me to merge *this* patch as-is. >> >>> >> >>>To avoid having this discussion a third time in the future, I think >> >>>you should add some comments at the point where you update the >> >>>resource. Updating a resource after it's in the resource tree is >> >>>clearly dangerous, so we need some explanation of why it's sort of OK >> >>>in this particular case. >> >>> >> >>>If you can write a comment and dig up a URL to our previous >> >>>discussion, I'd like to incorporate that into *this* patch before I >> >>>merge it. The sooner we can document this, the less work it will be >> >>>in the future. >> >>> >> >> >> >>Ok. Sorry for the confusion and that I should looked into the code for more. >> >>We already had one comment like below in arch/powerpc/platforms/powernv/pci-ioda.c:: >> >>pnv_pci_vf_resource_shift(). I think it's exactly what you like to have, please >> >>help to confirm. I believe it was added based on your comments long time ago when >> >>you review the SRIOV (for PowerNV) patches. >> >> >> >> /* >> >> * After doing so, there would be a "hole" in the /proc/iomem when >> >> * offset is a positive value. It looks like the device return some >> >> * mmio back to the system, which actually no one could use it. >> >> */ >> >> >> >>http://www.spinics.net/lists/linux-pci/msg39424.html >> >> >> > >> >Bjorn, please let me know if you have concerns. >> > >> >> Bjorn, Sorry that I have to ping you again. I assume it's mergable. >> Please let me know if you have more concerns. > >I'm not going to merge this without a comment in >pnv_pci_vf_resource_shift() that addresses the two questions I raised >in my very first response. I don't think the existing comment about >"After doing so, there would be a 'hole'" is sufficient. If it were >sufficient, I wouldn't have raised the questions in the first place. > >The resource tree relies on properties like "the sibling list is >ordered by res->start" and "a child is completely contained within its >parent". pnv_pci_vf_resource_shift() does this: > > res->start += size * offset; > >That could easily break both of those properties, so you need to >provide a way for a reader to verify that it actually does not break >them. > >You can write that comment, or I can do it myself. Either way, it's >going to take me a while to figure out again what's going on there >because it is definitely outside the usual resource management model. > Bjorn, thanks for providing more information about the concerns, but I think original comments are sufficient if I don't miss anything here. The expansion and shrinking on the IOV BAR (res->start) don't change the order of its sibling list because the adjusted "res->start" should be in the boundary of original IOV BAR. However, it's true there is a "hole" in IOV BAR's parent and it would be taken by someone else in theory, but it is rare or even impossible for someone else to request resource in the "hole" because the "hole" isn't known by anyone except the platform itself. Besides, the IOV BAR resource shouldn't have children when the function (pnv_pci_vf_resource_shift()) is called. Summary: When we're going to update the IOV BAR, the BAR (resource) isn't stable and usable. It is the assumption and I don't see anything wrong about it. Thanks, Gavin ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] PCI: Disable IOV before pcibios_sriov_disable() 2017-04-18 3:51 ` Gavin Shan @ 2017-06-18 23:39 ` Gavin Shan 0 siblings, 0 replies; 11+ messages in thread From: Gavin Shan @ 2017-06-18 23:39 UTC (permalink / raw) To: Gavin Shan; +Cc: Bjorn Helgaas, linux-pci, bhelgaas, clsoto On Tue, Apr 18, 2017 at 01:51:19PM +1000, Gavin Shan wrote: >On Thu, Apr 13, 2017 at 07:27:32AM -0500, Bjorn Helgaas wrote: >>On Thu, Apr 13, 2017 at 05:53:55PM +1000, Gavin Shan wrote: >>> On Fri, Mar 31, 2017 at 10:24:06AM +1100, Gavin Shan wrote: >>> >On Tue, Mar 21, 2017 at 09:50:06AM +1100, Gavin Shan wrote: >>> >>On Mon, Mar 20, 2017 at 10:46:44AM -0500, Bjorn Helgaas wrote: >>> >>>On Sat, Mar 18, 2017 at 11:19:07AM +1100, Gavin Shan wrote: >>> >>>> On Thu, Mar 09, 2017 at 11:34:32AM +1100, Gavin Shan wrote: >>> >>>> >On Tue, Mar 07, 2017 at 02:15:29PM -0600, Bjorn Helgaas wrote: >>> >>>> >>On Mon, Feb 27, 2017 at 11:18:32AM +1100, Gavin Shan wrote: >>> >>>> >>> The PowerNV platform is the only user of pcibios_sriov_disable(). >>> >>>> >>> The IOV BAR could be shifted by pci_iov_update_resource(). The >>> >>>> >>> warning message in the function is printed if the IOV capability >>> >>>> >>> is in enabled (PCI_SRIOV_CTRL_VFE && PCI_SRIOV_CTRL_MSE) state. >>> >>>> >>> >>> >>>> >>> pci_disable_sriov >>> >>>> >>> sriov_disable >>> >>>> >>> pnv_pci_sriov_disable >>> >>>> >>> pnv_pci_vf_resource_shift >>> >>>> >>> pci_update_resource >>> >>>> >>> pci_iov_update_resource >>> >>>> >>> >>> >>>> >>> This fixes the issue by disabling IOV capability before calling >>> >>>> >>> pcibios_sriov_disable(). With it, the disabling path matches with >>> >>>> >>> the enabling path: pcibios_sriov_enable() is called before the >>> >>>> >>> IOV capability is enabled. >>> >>>> >> >>> >>>> >>I'm vaguely uncomfortable about this path: >>> >>>> >> >>> >>>> >> pci_disable_sriov >>> >>>> >> sriov_disable >>> >>>> >> pcibios_sriov_disable # powerpc version >>> >>>> >> pnv_pci_sriov_disable >>> >>>> >> pnv_pci_vf_resource_shift >>> >>>> >> res = &dev->resource[i + PCI_IOV_RESOURCES] >>> >>>> >> res->start += size * offset >>> >>>> >> pci_update_resource >>> >>>> >> pci_iov_update_resource >>> >>>> >> pnv_pci_vf_release_m64 >>> >>>> >> >>> >>>> >>1) "res" is already in the resource tree, so we shouldn't be changing >>> >>>> >> its start address, because that may make the tree inconsistent, >>> >>>> >> e.g., the resource may no longer be completely contained in its >>> >>>> >> parent, it may conflict with a sibling, etc. >>> >>>> >> >>> >>>> >>2) If we update "res->start", shouldn't we update "res->end" >>> >>>> >> correspondingly? >>> >>>> >> >>> >>>> >>It seems like it'd be better if we didn't update the device resources >>> >>>> >>in the enable/disable paths. If we could do the resource adjustments >>> >>>> >>earlier, somewhere before we give the device to a driver, it seems >>> >>>> >>like it would avoid these issues. >>> >>>> >> >>> >>>> >>We might have talked about these questions in the past, so I apologize >>> >>>> >>if you've already explained this. If that's the case, maybe we just >>> >>>> >>need some comments in the code to help the next confused reader. >>> >>>> >> >>> >>>> > >>> >>>> >Bjorn, thanks for review. I agree it's not perfect. We discussed this long >>> >>>> >time ago as I can remember. Let me try to make it a bit more clear: In our >>> >>>> >PHB hardware, there are 16 MMIO BARs. Each of them can be shared by 256 PEs >>> >>>> >(A) and owned exclusively by one PE (B). When VF BAR size is small enough, >>> >>>> >we take (A). Otherwise, we have to take (B). Only when taking (A), we need >>> >>>> >expand/move/shrink the IOV BAR. So lets stick to (A) for discussion here. >>> >>>> > >>> >>>> >Under (A), PF's IOV BAR size is extended to ((256 * (VF BAR size)) when the >>> >>>> >PF is probed. Then the @res, which corresponds to the IOV BAR, is assigned >>> >>>> >and put into the resource tree during resource sizing and assignment stage. >>> >>>> >The IOV capability is going to be enabled by PF's driver or sysfs entry, it >>> >>>> >calls into pnv_pci_sriov_enable() where number of contigous PEs (equal to >>> >>>> >number of VFs to be enabled) are allocated. We shift the IOV BAR base according >>> >>>> >to the starting PE number of the allocated block. Afterewards, the IOV BAR >>> >>>> >is restored when the IOV capability is disabled. So it's all about the PE. >>> >>>> >The IOV BAR's end address isn't touched, we needn't update @res->end when >>> >>>> >restoring the IOV BAR. >>> >>>> > >>> >>>> >In order to avoid moving IOV BAR base address, I need know the the PEs >>> >>>> >for the VFs before resourcd sizing and assignment stage. It means I need >>> >>>> >to reserve PEs in advance, which isn't nice because we never enable the >>> >>>> >VFs. In that case, the PEs are wasted. >>> >>>> > >>> >>>> >Yeah, it's nice to have add some comments in pnv_pci_vf_resource_shift() >>> >>>> >where pci_update_resource() is called. I will post another patch to >>> >>>> >linux-ppcdev and you'll be copied. If you agree, I think you can merge >>> >>>> >this patch as none of the concerns are too much related. >>> >>>> > >>> >>>> >>> >>>> Sorry, Bjorn, ping! Please let me know if there are more concerns you have. >>> >>> >>> >>>I think we had a misunderstanding -- you mentioned adding some >>> >>>comments and wrote "I will post another patch", and I *thought* you >>> >>>meant you were going to post another version of *this* patch with some >>> >>>updated comments. So I've been waiting for that updated patch. But I >>> >>>think you've been waiting for me to merge *this* patch as-is. >>> >>> >>> >>>To avoid having this discussion a third time in the future, I think >>> >>>you should add some comments at the point where you update the >>> >>>resource. Updating a resource after it's in the resource tree is >>> >>>clearly dangerous, so we need some explanation of why it's sort of OK >>> >>>in this particular case. >>> >>> >>> >>>If you can write a comment and dig up a URL to our previous >>> >>>discussion, I'd like to incorporate that into *this* patch before I >>> >>>merge it. The sooner we can document this, the less work it will be >>> >>>in the future. >>> >>> >>> >> >>> >>Ok. Sorry for the confusion and that I should looked into the code for more. >>> >>We already had one comment like below in arch/powerpc/platforms/powernv/pci-ioda.c:: >>> >>pnv_pci_vf_resource_shift(). I think it's exactly what you like to have, please >>> >>help to confirm. I believe it was added based on your comments long time ago when >>> >>you review the SRIOV (for PowerNV) patches. >>> >> >>> >> /* >>> >> * After doing so, there would be a "hole" in the /proc/iomem when >>> >> * offset is a positive value. It looks like the device return some >>> >> * mmio back to the system, which actually no one could use it. >>> >> */ >>> >> >>> >>http://www.spinics.net/lists/linux-pci/msg39424.html >>> >> >>> > >>> >Bjorn, please let me know if you have concerns. >>> > >>> >>> Bjorn, Sorry that I have to ping you again. I assume it's mergable. >>> Please let me know if you have more concerns. >> >>I'm not going to merge this without a comment in >>pnv_pci_vf_resource_shift() that addresses the two questions I raised >>in my very first response. I don't think the existing comment about >>"After doing so, there would be a 'hole'" is sufficient. If it were >>sufficient, I wouldn't have raised the questions in the first place. >> >>The resource tree relies on properties like "the sibling list is >>ordered by res->start" and "a child is completely contained within its >>parent". pnv_pci_vf_resource_shift() does this: >> >> res->start += size * offset; >> >>That could easily break both of those properties, so you need to >>provide a way for a reader to verify that it actually does not break >>them. >> >>You can write that comment, or I can do it myself. Either way, it's >>going to take me a while to figure out again what's going on there >>because it is definitely outside the usual resource management model. >> > >Bjorn, thanks for providing more information about the concerns, but I >think original comments are sufficient if I don't miss anything here. > >The expansion and shrinking on the IOV BAR (res->start) don't change the >order of its sibling list because the adjusted "res->start" should be >in the boundary of original IOV BAR. However, it's true there is a "hole" >in IOV BAR's parent and it would be taken by someone else in theory, >but it is rare or even impossible for someone else to request resource >in the "hole" because the "hole" isn't known by anyone except the platform >itself. Besides, the IOV BAR resource shouldn't have children when the >function (pnv_pci_vf_resource_shift()) is called. > >Summary: When we're going to update the IOV BAR, the BAR (resource) isn't >stable and usable. It is the assumption and I don't see anything wrong >about it. > Bjorn, could you guide how to proceed with this? :) Cheers, Gavin ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2017-06-18 23:39 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-02-27 0:18 [PATCH] PCI: Disable IOV before pcibios_sriov_disable() Gavin Shan 2017-03-07 20:15 ` Bjorn Helgaas 2017-03-09 0:34 ` Gavin Shan 2017-03-18 0:19 ` Gavin Shan 2017-03-20 15:46 ` Bjorn Helgaas 2017-03-20 22:50 ` Gavin Shan 2017-03-30 23:24 ` Gavin Shan 2017-04-13 7:53 ` Gavin Shan 2017-04-13 12:27 ` Bjorn Helgaas 2017-04-18 3:51 ` Gavin Shan 2017-06-18 23:39 ` Gavin Shan
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).