* [PATCH 01/13] iommu-common: move to arch/sparc
2018-04-25 5:15 centralize SWIOTLB config symbol and misc other cleanups V3 Christoph Hellwig
@ 2018-04-25 5:15 ` Christoph Hellwig
2018-04-25 14:58 ` David Miller
2018-04-25 5:15 ` [PATCH 02/13] iommu-helper: unexport iommu_area_alloc Christoph Hellwig
` (12 subsequent siblings)
13 siblings, 1 reply; 22+ messages in thread
From: Christoph Hellwig @ 2018-04-25 5:15 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk, iommu
Cc: sstabellini, x86, linux-pci, linux-mm, linux-mips, sparclinux,
linux-arm-kernel
This code is only used by sparc, and all new iommu drivers should use the
drivers/iommu/ framework. Also remove the unused exports.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
---
{include/linux => arch/sparc/include/asm}/iommu-common.h | 0
arch/sparc/include/asm/iommu_64.h | 2 +-
arch/sparc/kernel/Makefile | 2 +-
{lib => arch/sparc/kernel}/iommu-common.c | 5 +----
arch/sparc/kernel/iommu.c | 2 +-
arch/sparc/kernel/ldc.c | 2 +-
arch/sparc/kernel/pci_sun4v.c | 2 +-
lib/Makefile | 2 +-
8 files changed, 7 insertions(+), 10 deletions(-)
rename {include/linux => arch/sparc/include/asm}/iommu-common.h (100%)
rename {lib => arch/sparc/kernel}/iommu-common.c (98%)
diff --git a/include/linux/iommu-common.h b/arch/sparc/include/asm/iommu-common.h
similarity index 100%
rename from include/linux/iommu-common.h
rename to arch/sparc/include/asm/iommu-common.h
diff --git a/arch/sparc/include/asm/iommu_64.h b/arch/sparc/include/asm/iommu_64.h
index 9ed6b54caa4b..0ef6dedf747e 100644
--- a/arch/sparc/include/asm/iommu_64.h
+++ b/arch/sparc/include/asm/iommu_64.h
@@ -17,7 +17,7 @@
#define IOPTE_WRITE 0x0000000000000002UL
#define IOMMU_NUM_CTXS 4096
-#include <linux/iommu-common.h>
+#include <asm/iommu-common.h>
struct iommu_arena {
unsigned long *map;
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 76cb57750dda..a284662b0e4c 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -59,7 +59,7 @@ obj-$(CONFIG_SPARC32) += leon_pmc.o
obj-$(CONFIG_SPARC64) += reboot.o
obj-$(CONFIG_SPARC64) += sysfs.o
-obj-$(CONFIG_SPARC64) += iommu.o
+obj-$(CONFIG_SPARC64) += iommu.o iommu-common.o
obj-$(CONFIG_SPARC64) += central.o
obj-$(CONFIG_SPARC64) += starfire.o
obj-$(CONFIG_SPARC64) += power.o
diff --git a/lib/iommu-common.c b/arch/sparc/kernel/iommu-common.c
similarity index 98%
rename from lib/iommu-common.c
rename to arch/sparc/kernel/iommu-common.c
index 55b00de106b5..59cb16691322 100644
--- a/lib/iommu-common.c
+++ b/arch/sparc/kernel/iommu-common.c
@@ -8,9 +8,9 @@
#include <linux/bitmap.h>
#include <linux/bug.h>
#include <linux/iommu-helper.h>
-#include <linux/iommu-common.h>
#include <linux/dma-mapping.h>
#include <linux/hash.h>
+#include <asm/iommu-common.h>
static unsigned long iommu_large_alloc = 15;
@@ -93,7 +93,6 @@ void iommu_tbl_pool_init(struct iommu_map_table *iommu,
p->hint = p->start;
p->end = num_entries;
}
-EXPORT_SYMBOL(iommu_tbl_pool_init);
unsigned long iommu_tbl_range_alloc(struct device *dev,
struct iommu_map_table *iommu,
@@ -224,7 +223,6 @@ unsigned long iommu_tbl_range_alloc(struct device *dev,
return n;
}
-EXPORT_SYMBOL(iommu_tbl_range_alloc);
static struct iommu_pool *get_pool(struct iommu_map_table *tbl,
unsigned long entry)
@@ -264,4 +262,3 @@ void iommu_tbl_range_free(struct iommu_map_table *iommu, u64 dma_addr,
bitmap_clear(iommu->map, entry, npages);
spin_unlock_irqrestore(&(pool->lock), flags);
}
-EXPORT_SYMBOL(iommu_tbl_range_free);
diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c
index b08dc3416f06..40d008b0bd3e 100644
--- a/arch/sparc/kernel/iommu.c
+++ b/arch/sparc/kernel/iommu.c
@@ -14,7 +14,7 @@
#include <linux/errno.h>
#include <linux/iommu-helper.h>
#include <linux/bitmap.h>
-#include <linux/iommu-common.h>
+#include <asm/iommu-common.h>
#ifdef CONFIG_PCI
#include <linux/pci.h>
diff --git a/arch/sparc/kernel/ldc.c b/arch/sparc/kernel/ldc.c
index 86b625f9d8dc..c0fa3ef6cf01 100644
--- a/arch/sparc/kernel/ldc.c
+++ b/arch/sparc/kernel/ldc.c
@@ -16,7 +16,7 @@
#include <linux/list.h>
#include <linux/init.h>
#include <linux/bitmap.h>
-#include <linux/iommu-common.h>
+#include <asm/iommu-common.h>
#include <asm/hypervisor.h>
#include <asm/iommu.h>
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index 249367228c33..565d9ac883d0 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -16,7 +16,7 @@
#include <linux/export.h>
#include <linux/log2.h>
#include <linux/of_device.h>
-#include <linux/iommu-common.h>
+#include <asm/iommu-common.h>
#include <asm/iommu.h>
#include <asm/irq.h>
diff --git a/lib/Makefile b/lib/Makefile
index ce20696d5a92..94203b5eecd4 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -147,7 +147,7 @@ obj-$(CONFIG_AUDIT_GENERIC) += audit.o
obj-$(CONFIG_AUDIT_COMPAT_GENERIC) += compat_audit.o
obj-$(CONFIG_SWIOTLB) += swiotlb.o
-obj-$(CONFIG_IOMMU_HELPER) += iommu-helper.o iommu-common.o
+obj-$(CONFIG_IOMMU_HELPER) += iommu-helper.o
obj-$(CONFIG_FAULT_INJECTION) += fault-inject.o
obj-$(CONFIG_NOTIFIER_ERROR_INJECTION) += notifier-error-inject.o
obj-$(CONFIG_PM_NOTIFIER_ERROR_INJECT) += pm-notifier-error-inject.o
--
2.17.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: [PATCH 01/13] iommu-common: move to arch/sparc
2018-04-25 5:15 ` [PATCH 01/13] iommu-common: move to arch/sparc Christoph Hellwig
@ 2018-04-25 14:58 ` David Miller
0 siblings, 0 replies; 22+ messages in thread
From: David Miller @ 2018-04-25 14:58 UTC (permalink / raw)
To: hch
Cc: linux-mips, sstabellini, konrad.wilk, linux-pci, x86, linux-mm,
iommu, sparclinux, linux-arm-kernel
From: Christoph Hellwig <hch@lst.de>
Date: Wed, 25 Apr 2018 07:15:27 +0200
> This code is only used by sparc, and all new iommu drivers should use the
> drivers/iommu/ framework. Also remove the unused exports.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Acked-by: David S. Miller <davem@davemloft.net>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 02/13] iommu-helper: unexport iommu_area_alloc
2018-04-25 5:15 centralize SWIOTLB config symbol and misc other cleanups V3 Christoph Hellwig
2018-04-25 5:15 ` [PATCH 01/13] iommu-common: move to arch/sparc Christoph Hellwig
@ 2018-04-25 5:15 ` Christoph Hellwig
2018-04-25 5:15 ` [PATCH 03/13] iommu-helper: mark iommu_is_span_boundary as inline Christoph Hellwig
` (11 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Christoph Hellwig @ 2018-04-25 5:15 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk, iommu
Cc: sstabellini, x86, linux-pci, linux-mm, linux-mips, sparclinux,
linux-arm-kernel
This function is only used by built-in code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
---
lib/iommu-helper.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/lib/iommu-helper.c b/lib/iommu-helper.c
index 23633c0fda4a..ded1703e7e64 100644
--- a/lib/iommu-helper.c
+++ b/lib/iommu-helper.c
@@ -3,7 +3,6 @@
* IOMMU helper functions for the free area management
*/
-#include <linux/export.h>
#include <linux/bitmap.h>
#include <linux/bug.h>
@@ -38,4 +37,3 @@ unsigned long iommu_area_alloc(unsigned long *map, unsigned long size,
}
return -1;
}
-EXPORT_SYMBOL(iommu_area_alloc);
--
2.17.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 03/13] iommu-helper: mark iommu_is_span_boundary as inline
2018-04-25 5:15 centralize SWIOTLB config symbol and misc other cleanups V3 Christoph Hellwig
2018-04-25 5:15 ` [PATCH 01/13] iommu-common: move to arch/sparc Christoph Hellwig
2018-04-25 5:15 ` [PATCH 02/13] iommu-helper: unexport iommu_area_alloc Christoph Hellwig
@ 2018-04-25 5:15 ` Christoph Hellwig
2018-04-25 5:15 ` [PATCH 04/13] iommu-helper: move the IOMMU_HELPER config symbol to lib/ Christoph Hellwig
` (10 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Christoph Hellwig @ 2018-04-25 5:15 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk, iommu
Cc: sstabellini, x86, linux-pci, linux-mm, linux-mips, sparclinux,
linux-arm-kernel
This avoids selecting IOMMU_HELPER just for this function. And we only
use it once or twice in normal builds so this often even is a size
reduction.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
arch/alpha/Kconfig | 3 ---
arch/arm/Kconfig | 3 ---
arch/arm64/Kconfig | 3 ---
arch/ia64/Kconfig | 3 ---
arch/mips/cavium-octeon/Kconfig | 4 ----
arch/mips/loongson64/Kconfig | 4 ----
arch/mips/netlogic/Kconfig | 3 ---
arch/powerpc/Kconfig | 1 -
arch/unicore32/mm/Kconfig | 3 ---
arch/x86/Kconfig | 2 +-
drivers/parisc/Kconfig | 5 -----
include/linux/iommu-helper.h | 13 ++++++++++---
lib/iommu-helper.c | 12 +-----------
13 files changed, 12 insertions(+), 47 deletions(-)
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index b2022885ced8..3ff735a722af 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -345,9 +345,6 @@ config PCI_DOMAINS
config PCI_SYSCALL
def_bool PCI
-config IOMMU_HELPER
- def_bool PCI
-
config ALPHA_NONAME
bool
depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a7f8e7f4b88f..2f79222c5c02 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1781,9 +1781,6 @@ config SECCOMP
config SWIOTLB
def_bool y
-config IOMMU_HELPER
- def_bool SWIOTLB
-
config PARAVIRT
bool "Enable paravirtualization code"
help
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index eb2cf4938f6d..fbef5d3de83f 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -252,9 +252,6 @@ config SMP
config SWIOTLB
def_bool y
-config IOMMU_HELPER
- def_bool SWIOTLB
-
config KERNEL_MODE_NEON
def_bool y
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index bbe12a038d21..862c5160c09d 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -613,6 +613,3 @@ source "security/Kconfig"
source "crypto/Kconfig"
source "lib/Kconfig"
-
-config IOMMU_HELPER
- def_bool (IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB || IA64_GENERIC || SWIOTLB)
diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig
index b5eee1a57d6c..647ed158ac98 100644
--- a/arch/mips/cavium-octeon/Kconfig
+++ b/arch/mips/cavium-octeon/Kconfig
@@ -67,16 +67,12 @@ config CAVIUM_OCTEON_LOCK_L2_MEMCPY
help
Lock the kernel's implementation of memcpy() into L2.
-config IOMMU_HELPER
- bool
-
config NEED_SG_DMA_LENGTH
bool
config SWIOTLB
def_bool y
select DMA_DIRECT_OPS
- select IOMMU_HELPER
select NEED_SG_DMA_LENGTH
config OCTEON_ILM
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index 72af0c183969..5efb2e63878e 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -130,9 +130,6 @@ config LOONGSON_UART_BASE
default y
depends on EARLY_PRINTK || SERIAL_8250
-config IOMMU_HELPER
- bool
-
config NEED_SG_DMA_LENGTH
bool
@@ -141,7 +138,6 @@ config SWIOTLB
default y
depends on CPU_LOONGSON3
select DMA_DIRECT_OPS
- select IOMMU_HELPER
select NEED_SG_DMA_LENGTH
select NEED_DMA_MAP_STATE
diff --git a/arch/mips/netlogic/Kconfig b/arch/mips/netlogic/Kconfig
index 7fcfc7fe9f14..5c5ee0e05a17 100644
--- a/arch/mips/netlogic/Kconfig
+++ b/arch/mips/netlogic/Kconfig
@@ -83,9 +83,6 @@ endif
config NLM_COMMON
bool
-config IOMMU_HELPER
- bool
-
config NEED_SG_DMA_LENGTH
bool
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index c32a181a7cbb..43e3c8e4e7f4 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -484,7 +484,6 @@ config IOMMU_HELPER
config SWIOTLB
bool "SWIOTLB support"
default n
- select IOMMU_HELPER
---help---
Support for IO bounce buffering for systems without an IOMMU.
This allows us to DMA to the full physical address space on
diff --git a/arch/unicore32/mm/Kconfig b/arch/unicore32/mm/Kconfig
index e9154a59d561..3f105e00c432 100644
--- a/arch/unicore32/mm/Kconfig
+++ b/arch/unicore32/mm/Kconfig
@@ -44,9 +44,6 @@ config SWIOTLB
def_bool y
select DMA_DIRECT_OPS
-config IOMMU_HELPER
- def_bool SWIOTLB
-
config NEED_SG_DMA_LENGTH
def_bool SWIOTLB
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 00fcf81f2c56..cb2c7ecc1fea 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -931,7 +931,7 @@ config SWIOTLB
config IOMMU_HELPER
def_bool y
- depends on CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU
+ depends on CALGARY_IOMMU || GART_IOMMU
config MAXSMP
bool "Enable Maximum number of SMP Processors and NUMA Nodes"
diff --git a/drivers/parisc/Kconfig b/drivers/parisc/Kconfig
index 3a102a84d637..5a48b5606110 100644
--- a/drivers/parisc/Kconfig
+++ b/drivers/parisc/Kconfig
@@ -103,11 +103,6 @@ config IOMMU_SBA
depends on PCI_LBA
default PCI_LBA
-config IOMMU_HELPER
- bool
- depends on IOMMU_SBA || IOMMU_CCIO
- default y
-
source "drivers/pcmcia/Kconfig"
endmenu
diff --git a/include/linux/iommu-helper.h b/include/linux/iommu-helper.h
index cb9a9248c8c0..70d01edcbf8b 100644
--- a/include/linux/iommu-helper.h
+++ b/include/linux/iommu-helper.h
@@ -2,6 +2,7 @@
#ifndef _LINUX_IOMMU_HELPER_H
#define _LINUX_IOMMU_HELPER_H
+#include <linux/bug.h>
#include <linux/kernel.h>
static inline unsigned long iommu_device_max_index(unsigned long size,
@@ -14,9 +15,15 @@ static inline unsigned long iommu_device_max_index(unsigned long size,
return size;
}
-extern int iommu_is_span_boundary(unsigned int index, unsigned int nr,
- unsigned long shift,
- unsigned long boundary_size);
+static inline int iommu_is_span_boundary(unsigned int index, unsigned int nr,
+ unsigned long shift, unsigned long boundary_size)
+{
+ BUG_ON(!is_power_of_2(boundary_size));
+
+ shift = (shift + index) & (boundary_size - 1);
+ return shift + nr > boundary_size;
+}
+
extern unsigned long iommu_area_alloc(unsigned long *map, unsigned long size,
unsigned long start, unsigned int nr,
unsigned long shift,
diff --git a/lib/iommu-helper.c b/lib/iommu-helper.c
index ded1703e7e64..92a9f243c0e2 100644
--- a/lib/iommu-helper.c
+++ b/lib/iommu-helper.c
@@ -4,17 +4,7 @@
*/
#include <linux/bitmap.h>
-#include <linux/bug.h>
-
-int iommu_is_span_boundary(unsigned int index, unsigned int nr,
- unsigned long shift,
- unsigned long boundary_size)
-{
- BUG_ON(!is_power_of_2(boundary_size));
-
- shift = (shift + index) & (boundary_size - 1);
- return shift + nr > boundary_size;
-}
+#include <linux/iommu-helper.h>
unsigned long iommu_area_alloc(unsigned long *map, unsigned long size,
unsigned long start, unsigned int nr,
--
2.17.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 04/13] iommu-helper: move the IOMMU_HELPER config symbol to lib/
2018-04-25 5:15 centralize SWIOTLB config symbol and misc other cleanups V3 Christoph Hellwig
` (2 preceding siblings ...)
2018-04-25 5:15 ` [PATCH 03/13] iommu-helper: mark iommu_is_span_boundary as inline Christoph Hellwig
@ 2018-04-25 5:15 ` Christoph Hellwig
2018-04-25 5:15 ` [PATCH 05/13] scatterlist: move the NEED_SG_DMA_LENGTH config symbol to lib/Kconfig Christoph Hellwig
` (9 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Christoph Hellwig @ 2018-04-25 5:15 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk, iommu
Cc: sstabellini, x86, linux-pci, linux-mm, linux-mips, sparclinux,
linux-arm-kernel
This way we have one central definition of it, and user can select it as
needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
---
arch/powerpc/Kconfig | 4 +---
arch/s390/Kconfig | 5 ++---
arch/sparc/Kconfig | 5 +----
arch/x86/Kconfig | 6 ++----
lib/Kconfig | 3 +++
5 files changed, 9 insertions(+), 14 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 43e3c8e4e7f4..7698cf89af9c 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -223,6 +223,7 @@ config PPC
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_VIRT_CPU_ACCOUNTING
select HAVE_IRQ_TIME_ACCOUNTING
+ select IOMMU_HELPER if PPC64
select IRQ_DOMAIN
select IRQ_FORCED_THREADING
select MODULES_USE_ELF_RELA
@@ -478,9 +479,6 @@ config MPROFILE_KERNEL
depends on PPC64 && CPU_LITTLE_ENDIAN
def_bool !DISABLE_MPROFILE_KERNEL
-config IOMMU_HELPER
- def_bool PPC64
-
config SWIOTLB
bool "SWIOTLB support"
default n
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 199ac3e4da1d..60c4ab854182 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -709,7 +709,9 @@ config QDIO
menuconfig PCI
bool "PCI support"
select PCI_MSI
+ select IOMMU_HELPER
select IOMMU_SUPPORT
+
help
Enable PCI support.
@@ -733,9 +735,6 @@ config PCI_DOMAINS
config HAS_IOMEM
def_bool PCI
-config IOMMU_HELPER
- def_bool PCI
-
config NEED_SG_DMA_LENGTH
def_bool PCI
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 8767e45f1b2b..44e0f3cd7988 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -67,6 +67,7 @@ config SPARC64
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_CONTEXT_TRACKING
select HAVE_DEBUG_KMEMLEAK
+ select IOMMU_HELPER
select SPARSE_IRQ
select RTC_DRV_CMOS
select RTC_DRV_BQ4802
@@ -106,10 +107,6 @@ config ARCH_DMA_ADDR_T_64BIT
bool
default y if ARCH_ATU
-config IOMMU_HELPER
- bool
- default y if SPARC64
-
config STACKTRACE_SUPPORT
bool
default y if SPARC64
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index cb2c7ecc1fea..fe9713539166 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -871,6 +871,7 @@ config DMI
config GART_IOMMU
bool "Old AMD GART IOMMU support"
+ select IOMMU_HELPER
select SWIOTLB
depends on X86_64 && PCI && AMD_NB
---help---
@@ -892,6 +893,7 @@ config GART_IOMMU
config CALGARY_IOMMU
bool "IBM Calgary IOMMU support"
+ select IOMMU_HELPER
select SWIOTLB
depends on X86_64 && PCI
---help---
@@ -929,10 +931,6 @@ config SWIOTLB
with more than 3 GB of memory.
If unsure, say Y.
-config IOMMU_HELPER
- def_bool y
- depends on CALGARY_IOMMU || GART_IOMMU
-
config MAXSMP
bool "Enable Maximum number of SMP Processors and NUMA Nodes"
depends on X86_64 && SMP && DEBUG_KERNEL
diff --git a/lib/Kconfig b/lib/Kconfig
index 5fe577673b98..2f6908577534 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -429,6 +429,9 @@ config SGL_ALLOC
bool
default n
+config IOMMU_HELPER
+ bool
+
config DMA_DIRECT_OPS
bool
depends on HAS_DMA && (!64BIT || ARCH_DMA_ADDR_T_64BIT)
--
2.17.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 05/13] scatterlist: move the NEED_SG_DMA_LENGTH config symbol to lib/Kconfig
2018-04-25 5:15 centralize SWIOTLB config symbol and misc other cleanups V3 Christoph Hellwig
` (3 preceding siblings ...)
2018-04-25 5:15 ` [PATCH 04/13] iommu-helper: move the IOMMU_HELPER config symbol to lib/ Christoph Hellwig
@ 2018-04-25 5:15 ` Christoph Hellwig
2018-04-25 5:15 ` [PATCH 06/13] dma-mapping: move the NEED_DMA_MAP_STATE " Christoph Hellwig
` (8 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Christoph Hellwig @ 2018-04-25 5:15 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk, iommu
Cc: sstabellini, x86, linux-pci, linux-mm, linux-mips, sparclinux,
linux-arm-kernel
This way we have one central definition of it, and user can select it as
needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
---
arch/alpha/Kconfig | 4 +---
arch/arm/Kconfig | 3 ---
arch/arm64/Kconfig | 4 +---
arch/hexagon/Kconfig | 4 +---
arch/ia64/Kconfig | 4 +---
arch/mips/cavium-octeon/Kconfig | 3 ---
arch/mips/loongson64/Kconfig | 3 ---
arch/mips/netlogic/Kconfig | 3 ---
arch/parisc/Kconfig | 4 +---
arch/powerpc/Kconfig | 4 +---
arch/s390/Kconfig | 4 +---
arch/sh/Kconfig | 5 ++---
arch/sparc/Kconfig | 4 +---
arch/unicore32/mm/Kconfig | 5 +----
arch/x86/Kconfig | 4 +---
lib/Kconfig | 3 +++
16 files changed, 15 insertions(+), 46 deletions(-)
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 3ff735a722af..8e6a67ecf069 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -10,6 +10,7 @@ config ALPHA
select HAVE_OPROFILE
select HAVE_PCSPKR_PLATFORM
select HAVE_PERF_EVENTS
+ select NEED_SG_DMA_LENGTH
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select AUTO_IRQ_AFFINITY if SMP
@@ -70,9 +71,6 @@ config ARCH_DMA_ADDR_T_64BIT
config NEED_DMA_MAP_STATE
def_bool y
-config NEED_SG_DMA_LENGTH
- def_bool y
-
config GENERIC_ISA_DMA
bool
default y
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2f79222c5c02..602c8320282f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -119,9 +119,6 @@ config ARM_HAS_SG_CHAIN
select ARCH_HAS_SG_CHAIN
bool
-config NEED_SG_DMA_LENGTH
- bool
-
config ARM_DMA_USE_IOMMU
bool
select ARM_HAS_SG_CHAIN
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index fbef5d3de83f..3b441c5587f1 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -133,6 +133,7 @@ config ARM64
select IRQ_FORCED_THREADING
select MODULES_USE_ELF_RELA
select MULTI_IRQ_HANDLER
+ select NEED_SG_DMA_LENGTH
select NO_BOOTMEM
select OF
select OF_EARLY_FLATTREE
@@ -243,9 +244,6 @@ config ARCH_DMA_ADDR_T_64BIT
config NEED_DMA_MAP_STATE
def_bool y
-config NEED_SG_DMA_LENGTH
- def_bool y
-
config SMP
def_bool y
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index 76d2f20d525e..37adb2003033 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -19,6 +19,7 @@ config HEXAGON
select GENERIC_IRQ_SHOW
select HAVE_ARCH_KGDB
select HAVE_ARCH_TRACEHOOK
+ select NEED_SG_DMA_LENGTH
select NO_IOPORT_MAP
select GENERIC_IOMAP
select GENERIC_SMP_IDLE_THREAD
@@ -63,9 +64,6 @@ config GENERIC_CSUM
config GENERIC_IRQ_PROBE
def_bool y
-config NEED_SG_DMA_LENGTH
- def_bool y
-
config RWSEM_GENERIC_SPINLOCK
def_bool n
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 862c5160c09d..333917676f7f 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -54,6 +54,7 @@ config IA64
select MODULES_USE_ELF_RELA
select ARCH_USE_CMPXCHG_LOCKREF
select HAVE_ARCH_AUDITSYSCALL
+ select NEED_SG_DMA_LENGTH
default y
help
The Itanium Processor Family is Intel's 64-bit successor to
@@ -84,9 +85,6 @@ config ARCH_DMA_ADDR_T_64BIT
config NEED_DMA_MAP_STATE
def_bool y
-config NEED_SG_DMA_LENGTH
- def_bool y
-
config SWIOTLB
bool
diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig
index 647ed158ac98..5d73041547a7 100644
--- a/arch/mips/cavium-octeon/Kconfig
+++ b/arch/mips/cavium-octeon/Kconfig
@@ -67,9 +67,6 @@ config CAVIUM_OCTEON_LOCK_L2_MEMCPY
help
Lock the kernel's implementation of memcpy() into L2.
-config NEED_SG_DMA_LENGTH
- bool
-
config SWIOTLB
def_bool y
select DMA_DIRECT_OPS
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index 5efb2e63878e..641a1477031e 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -130,9 +130,6 @@ config LOONGSON_UART_BASE
default y
depends on EARLY_PRINTK || SERIAL_8250
-config NEED_SG_DMA_LENGTH
- bool
-
config SWIOTLB
bool "Soft IOMMU Support for All-Memory DMA"
default y
diff --git a/arch/mips/netlogic/Kconfig b/arch/mips/netlogic/Kconfig
index 5c5ee0e05a17..412351c5acc6 100644
--- a/arch/mips/netlogic/Kconfig
+++ b/arch/mips/netlogic/Kconfig
@@ -83,7 +83,4 @@ endif
config NLM_COMMON
bool
-config NEED_SG_DMA_LENGTH
- bool
-
endif
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index fc5a574c3482..89caea87556e 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -51,6 +51,7 @@ config PARISC
select GENERIC_CLOCKEVENTS
select ARCH_NO_COHERENT_DMA_MMAP
select CPU_NO_EFFICIENT_FFS
+ select NEED_SG_DMA_LENGTH
help
The PA-RISC microprocessor is designed by Hewlett-Packard and used
@@ -114,9 +115,6 @@ config STACKTRACE_SUPPORT
config NEED_DMA_MAP_STATE
def_bool y
-config NEED_SG_DMA_LENGTH
- def_bool y
-
config ISA_DMA_API
bool
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 7698cf89af9c..cc9a616d8934 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -227,6 +227,7 @@ config PPC
select IRQ_DOMAIN
select IRQ_FORCED_THREADING
select MODULES_USE_ELF_RELA
+ select NEED_SG_DMA_LENGTH
select NO_BOOTMEM
select OF
select OF_EARLY_FLATTREE
@@ -910,9 +911,6 @@ config ZONE_DMA
config NEED_DMA_MAP_STATE
def_bool (PPC64 || NOT_COHERENT_CACHE)
-config NEED_SG_DMA_LENGTH
- def_bool y
-
config GENERIC_ISA_DMA
bool
depends on ISA_DMA_API
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 60c4ab854182..f80c6b983159 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -711,6 +711,7 @@ menuconfig PCI
select PCI_MSI
select IOMMU_HELPER
select IOMMU_SUPPORT
+ select NEED_SG_DMA_LENGTH
help
Enable PCI support.
@@ -735,9 +736,6 @@ config PCI_DOMAINS
config HAS_IOMEM
def_bool PCI
-config NEED_SG_DMA_LENGTH
- def_bool PCI
-
config NEED_DMA_MAP_STATE
def_bool PCI
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 97fe29316476..e127e0cbe30f 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -50,6 +50,8 @@ config SUPERH
select HAVE_ARCH_AUDITSYSCALL
select HAVE_FUTEX_CMPXCHG if FUTEX
select HAVE_NMI
+ select NEED_SG_DMA_LENGTH
+
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
@@ -163,9 +165,6 @@ config DMA_NONCOHERENT
config NEED_DMA_MAP_STATE
def_bool DMA_NONCOHERENT
-config NEED_SG_DMA_LENGTH
- def_bool y
-
config PGTABLE_LEVELS
default 3 if X2TLB
default 2
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 44e0f3cd7988..e79badc8a682 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -44,6 +44,7 @@ config SPARC
select ARCH_HAS_SG_CHAIN
select CPU_NO_EFFICIENT_FFS
select LOCKDEP_SMALL if LOCKDEP
+ select NEED_SG_DMA_LENGTH
config SPARC32
def_bool !64BIT
@@ -146,9 +147,6 @@ config ZONE_DMA
config NEED_DMA_MAP_STATE
def_bool y
-config NEED_SG_DMA_LENGTH
- def_bool y
-
config GENERIC_ISA_DMA
bool
default y if SPARC32
diff --git a/arch/unicore32/mm/Kconfig b/arch/unicore32/mm/Kconfig
index 3f105e00c432..1d9fed0ada71 100644
--- a/arch/unicore32/mm/Kconfig
+++ b/arch/unicore32/mm/Kconfig
@@ -43,7 +43,4 @@ config CPU_TLB_SINGLE_ENTRY_DISABLE
config SWIOTLB
def_bool y
select DMA_DIRECT_OPS
-
-config NEED_SG_DMA_LENGTH
- def_bool SWIOTLB
-
+ select NEED_SG_DMA_LENGTH
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index fe9713539166..ead3babe4e79 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -183,6 +183,7 @@ config X86
select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_USER_RETURN_NOTIFIER
select IRQ_FORCED_THREADING
+ select NEED_SG_DMA_LENGTH
select PCI_LOCKLESS_CONFIG
select PERF_EVENTS
select RTC_LIB
@@ -239,9 +240,6 @@ config NEED_DMA_MAP_STATE
def_bool y
depends on X86_64 || INTEL_IOMMU || DMA_API_DEBUG || SWIOTLB
-config NEED_SG_DMA_LENGTH
- def_bool y
-
config GENERIC_ISA_DMA
def_bool y
depends on ISA_DMA_API
diff --git a/lib/Kconfig b/lib/Kconfig
index 2f6908577534..aeb7fae16bc2 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -429,6 +429,9 @@ config SGL_ALLOC
bool
default n
+config NEED_SG_DMA_LENGTH
+ bool
+
config IOMMU_HELPER
bool
--
2.17.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 06/13] dma-mapping: move the NEED_DMA_MAP_STATE config symbol to lib/Kconfig
2018-04-25 5:15 centralize SWIOTLB config symbol and misc other cleanups V3 Christoph Hellwig
` (4 preceding siblings ...)
2018-04-25 5:15 ` [PATCH 05/13] scatterlist: move the NEED_SG_DMA_LENGTH config symbol to lib/Kconfig Christoph Hellwig
@ 2018-04-25 5:15 ` Christoph Hellwig
2018-04-25 5:15 ` [PATCH 07/13] arch: remove the ARCH_PHYS_ADDR_T_64BIT config symbol Christoph Hellwig
` (7 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Christoph Hellwig @ 2018-04-25 5:15 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk, iommu
Cc: sstabellini, x86, linux-pci, linux-mm, linux-mips, sparclinux,
linux-arm-kernel
This way we have one central definition of it, and user can select it as
needed. Note that we now also always select it when CONFIG_DMA_API_DEBUG
is select, which fixes some incorrect checks in a few network drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
---
arch/alpha/Kconfig | 4 +---
arch/arm/Kconfig | 4 +---
arch/arm64/Kconfig | 4 +---
arch/ia64/Kconfig | 4 +---
arch/mips/Kconfig | 3 ---
arch/parisc/Kconfig | 4 +---
arch/s390/Kconfig | 4 +---
arch/sh/Kconfig | 4 +---
arch/sparc/Kconfig | 4 +---
arch/unicore32/Kconfig | 4 +---
arch/x86/Kconfig | 6 ++----
drivers/iommu/Kconfig | 1 +
include/linux/dma-mapping.h | 2 +-
lib/Kconfig | 3 +++
lib/Kconfig.debug | 1 +
15 files changed, 17 insertions(+), 35 deletions(-)
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 8e6a67ecf069..1fd9645b0c67 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -10,6 +10,7 @@ config ALPHA
select HAVE_OPROFILE
select HAVE_PCSPKR_PLATFORM
select HAVE_PERF_EVENTS
+ select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
@@ -68,9 +69,6 @@ config ZONE_DMA
config ARCH_DMA_ADDR_T_64BIT
def_bool y
-config NEED_DMA_MAP_STATE
- def_bool y
-
config GENERIC_ISA_DMA
bool
default y
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 602c8320282f..aa1c187d756d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -96,6 +96,7 @@ config ARM
select HAVE_VIRT_CPU_ACCOUNTING_GEN
select IRQ_FORCED_THREADING
select MODULES_USE_ELF_REL
+ select NEED_DMA_MAP_STATE
select NO_BOOTMEM
select OF_EARLY_FLATTREE if OF
select OF_RESERVED_MEM if OF
@@ -221,9 +222,6 @@ config ARCH_MAY_HAVE_PC_FDC
config ZONE_DMA
bool
-config NEED_DMA_MAP_STATE
- def_bool y
-
config ARCH_SUPPORTS_UPROBES
def_bool y
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 3b441c5587f1..940adfb9a2bc 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -133,6 +133,7 @@ config ARM64
select IRQ_FORCED_THREADING
select MODULES_USE_ELF_RELA
select MULTI_IRQ_HANDLER
+ select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
select NO_BOOTMEM
select OF
@@ -241,9 +242,6 @@ config HAVE_GENERIC_GUP
config ARCH_DMA_ADDR_T_64BIT
def_bool y
-config NEED_DMA_MAP_STATE
- def_bool y
-
config SMP
def_bool y
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 333917676f7f..0e42731adaf1 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -54,6 +54,7 @@ config IA64
select MODULES_USE_ELF_RELA
select ARCH_USE_CMPXCHG_LOCKREF
select HAVE_ARCH_AUDITSYSCALL
+ select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
default y
help
@@ -82,9 +83,6 @@ config MMU
config ARCH_DMA_ADDR_T_64BIT
def_bool y
-config NEED_DMA_MAP_STATE
- def_bool y
-
config SWIOTLB
bool
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 225c95da23ce..47d72c64d687 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1122,9 +1122,6 @@ config DMA_NONCOHERENT
bool
select NEED_DMA_MAP_STATE
-config NEED_DMA_MAP_STATE
- bool
-
config SYS_HAS_EARLY_PRINTK
bool
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 89caea87556e..4d8f64d48597 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -51,6 +51,7 @@ config PARISC
select GENERIC_CLOCKEVENTS
select ARCH_NO_COHERENT_DMA_MMAP
select CPU_NO_EFFICIENT_FFS
+ select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
help
@@ -112,9 +113,6 @@ config PM
config STACKTRACE_SUPPORT
def_bool y
-config NEED_DMA_MAP_STATE
- def_bool y
-
config ISA_DMA_API
bool
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index f80c6b983159..89a007672f70 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -711,6 +711,7 @@ menuconfig PCI
select PCI_MSI
select IOMMU_HELPER
select IOMMU_SUPPORT
+ select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
help
@@ -736,9 +737,6 @@ config PCI_DOMAINS
config HAS_IOMEM
def_bool PCI
-config NEED_DMA_MAP_STATE
- def_bool PCI
-
config CHSC_SCH
def_tristate m
prompt "Support for CHSC subchannels"
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index e127e0cbe30f..9417f70e008e 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -50,6 +50,7 @@ config SUPERH
select HAVE_ARCH_AUDITSYSCALL
select HAVE_FUTEX_CMPXCHG if FUTEX
select HAVE_NMI
+ select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
help
@@ -162,9 +163,6 @@ config DMA_COHERENT
config DMA_NONCOHERENT
def_bool !DMA_COHERENT
-config NEED_DMA_MAP_STATE
- def_bool DMA_NONCOHERENT
-
config PGTABLE_LEVELS
default 3 if X2TLB
default 2
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index e79badc8a682..be770b511ddd 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -44,6 +44,7 @@ config SPARC
select ARCH_HAS_SG_CHAIN
select CPU_NO_EFFICIENT_FFS
select LOCKDEP_SMALL if LOCKDEP
+ select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
config SPARC32
@@ -144,9 +145,6 @@ config ZONE_DMA
bool
default y if SPARC32
-config NEED_DMA_MAP_STATE
- def_bool y
-
config GENERIC_ISA_DMA
bool
default y if SPARC32
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index 462e59a7ae78..82195714d20b 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -19,6 +19,7 @@ config UNICORE32
select ARCH_WANT_FRAME_POINTERS
select GENERIC_IOMAP
select MODULES_USE_ELF_REL
+ select NEED_DMA_MAP_STATE
help
UniCore-32 is 32-bit Instruction Set Architecture,
including a series of low-power-consumption RISC chip
@@ -61,9 +62,6 @@ config ARCH_MAY_HAVE_PC_FDC
config ZONE_DMA
def_bool y
-config NEED_DMA_MAP_STATE
- def_bool y
-
source "init/Kconfig"
source "kernel/Kconfig.freezer"
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index ead3babe4e79..a98a9b14fda2 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -28,6 +28,7 @@ config X86_64
select ARCH_USE_CMPXCHG_LOCKREF
select HAVE_ARCH_SOFT_DIRTY
select MODULES_USE_ELF_RELA
+ select NEED_DMA_MAP_STATE
select X86_DEV_DMA_OPS
select ARCH_HAS_SYSCALL_WRAPPER
@@ -236,10 +237,6 @@ config ARCH_MMAP_RND_COMPAT_BITS_MAX
config SBUS
bool
-config NEED_DMA_MAP_STATE
- def_bool y
- depends on X86_64 || INTEL_IOMMU || DMA_API_DEBUG || SWIOTLB
-
config GENERIC_ISA_DMA
def_bool y
depends on ISA_DMA_API
@@ -922,6 +919,7 @@ config CALGARY_IOMMU_ENABLED_BY_DEFAULT
# need this always selected by IOMMU for the VIA workaround
config SWIOTLB
def_bool y if X86_64
+ select NEED_DMA_MAP_STATE
---help---
Support for software bounce buffers used on x86-64 systems
which don't have a hardware IOMMU. Using this PCI devices
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index df171cb85822..5b714a062fa7 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -146,6 +146,7 @@ config INTEL_IOMMU
select DMA_DIRECT_OPS
select IOMMU_API
select IOMMU_IOVA
+ select NEED_DMA_MAP_STATE
select DMAR_TABLE
help
DMA remapping (DMAR) devices support enables independent address
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index f8ab1c0f589e..14269d25498b 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -839,7 +839,7 @@ static inline int dma_mmap_wc(struct device *dev,
#define dma_mmap_writecombine dma_mmap_wc
#endif
-#if defined(CONFIG_NEED_DMA_MAP_STATE) || defined(CONFIG_DMA_API_DEBUG)
+#ifdef CONFIG_NEED_DMA_MAP_STATE
#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME
#define DEFINE_DMA_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME
#define dma_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME)
diff --git a/lib/Kconfig b/lib/Kconfig
index aeb7fae16bc2..ce9fa962d59b 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -432,6 +432,9 @@ config SGL_ALLOC
config NEED_SG_DMA_LENGTH
bool
+config NEED_DMA_MAP_STATE
+ bool
+
config IOMMU_HELPER
bool
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index c40c7b734cd1..685ed2dd4384 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1635,6 +1635,7 @@ config PROVIDE_OHCI1394_DMA_INIT
config DMA_API_DEBUG
bool "Enable debugging of DMA-API usage"
depends on HAVE_DMA_API_DEBUG
+ select NEED_DMA_MAP_STATE
help
Enable this option to debug the use of the DMA API by device drivers.
With this option you will be able to detect common bugs in device
--
2.17.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 07/13] arch: remove the ARCH_PHYS_ADDR_T_64BIT config symbol
2018-04-25 5:15 centralize SWIOTLB config symbol and misc other cleanups V3 Christoph Hellwig
` (5 preceding siblings ...)
2018-04-25 5:15 ` [PATCH 06/13] dma-mapping: move the NEED_DMA_MAP_STATE " Christoph Hellwig
@ 2018-04-25 5:15 ` Christoph Hellwig
2018-05-02 20:11 ` James Hogan
2018-04-25 5:15 ` [PATCH 08/13] arch: define the ARCH_DMA_ADDR_T_64BIT config symbol in lib/Kconfig Christoph Hellwig
` (6 subsequent siblings)
13 siblings, 1 reply; 22+ messages in thread
From: Christoph Hellwig @ 2018-04-25 5:15 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk, iommu
Cc: sstabellini, x86, linux-pci, linux-mm, linux-mips, sparclinux,
linux-arm-kernel
Instead select the PHYS_ADDR_T_64BIT for 32-bit architectures that need a
64-bit phys_addr_t type directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
arch/arc/Kconfig | 4 +---
arch/arm/kernel/setup.c | 2 +-
arch/arm/mm/Kconfig | 4 +---
arch/arm64/Kconfig | 3 ---
arch/mips/Kconfig | 15 ++++++---------
arch/powerpc/Kconfig | 5 +----
arch/powerpc/platforms/Kconfig.cputype | 1 +
arch/riscv/Kconfig | 6 ++----
arch/x86/Kconfig | 5 +----
mm/Kconfig | 2 +-
10 files changed, 15 insertions(+), 32 deletions(-)
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index d76bf4a83740..f94c61da682a 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -453,13 +453,11 @@ config ARC_HAS_PAE40
default n
depends on ISA_ARCV2
select HIGHMEM
+ select PHYS_ADDR_T_64BIT
help
Enable access to physical memory beyond 4G, only supported on
ARC cores with 40 bit Physical Addressing support
-config ARCH_PHYS_ADDR_T_64BIT
- def_bool ARC_HAS_PAE40
-
config ARCH_DMA_ADDR_T_64BIT
bool
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index fc40a2b40595..35ca494c028c 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -754,7 +754,7 @@ int __init arm_add_memory(u64 start, u64 size)
else
size -= aligned_start - start;
-#ifndef CONFIG_ARCH_PHYS_ADDR_T_64BIT
+#ifndef CONFIG_PHYS_ADDR_T_64BIT
if (aligned_start > ULONG_MAX) {
pr_crit("Ignoring memory at 0x%08llx outside 32-bit physical address space\n",
(long long)start);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 7f14acf67caf..2f77c6344ef1 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -661,6 +661,7 @@ config ARM_LPAE
bool "Support for the Large Physical Address Extension"
depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \
!CPU_32v4 && !CPU_32v3
+ select PHYS_ADDR_T_64BIT
help
Say Y if you have an ARMv7 processor supporting the LPAE page
table format and you would like to access memory beyond the
@@ -673,9 +674,6 @@ config ARM_PV_FIXUP
def_bool y
depends on ARM_LPAE && ARM_PATCH_PHYS_VIRT && ARCH_KEYSTONE
-config ARCH_PHYS_ADDR_T_64BIT
- def_bool ARM_LPAE
-
config ARCH_DMA_ADDR_T_64BIT
bool
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 940adfb9a2bc..b6aa33e642cc 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -152,9 +152,6 @@ config ARM64
config 64BIT
def_bool y
-config ARCH_PHYS_ADDR_T_64BIT
- def_bool y
-
config MMU
def_bool y
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 47d72c64d687..985388078872 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -132,7 +132,7 @@ config MIPS_GENERIC
config MIPS_ALCHEMY
bool "Alchemy processor based machines"
- select ARCH_PHYS_ADDR_T_64BIT
+ select PHYS_ADDR_T_64BIT
select CEVT_R4K
select CSRC_R4K
select IRQ_MIPS_CPU
@@ -890,7 +890,7 @@ config CAVIUM_OCTEON_SOC
bool "Cavium Networks Octeon SoC based boards"
select CEVT_R4K
select ARCH_HAS_PHYS_TO_DMA
- select ARCH_PHYS_ADDR_T_64BIT
+ select PHYS_ADDR_T_64BIT
select DMA_COHERENT
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
@@ -936,7 +936,7 @@ config NLM_XLR_BOARD
select SWAP_IO_SPACE
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
- select ARCH_PHYS_ADDR_T_64BIT
+ select PHYS_ADDR_T_64BIT
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select DMA_COHERENT
@@ -962,7 +962,7 @@ config NLM_XLP_BOARD
select HW_HAS_PCI
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
- select ARCH_PHYS_ADDR_T_64BIT
+ select PHYS_ADDR_T_64BIT
select GPIOLIB
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -1102,7 +1102,7 @@ config FW_CFE
bool
config ARCH_DMA_ADDR_T_64BIT
- def_bool (HIGHMEM && ARCH_PHYS_ADDR_T_64BIT) || 64BIT
+ def_bool (HIGHMEM && PHYS_ADDR_T_64BIT) || 64BIT
config ARCH_SUPPORTS_UPROBES
bool
@@ -1767,7 +1767,7 @@ config CPU_MIPS32_R5_XPA
depends on SYS_SUPPORTS_HIGHMEM
select XPA
select HIGHMEM
- select ARCH_PHYS_ADDR_T_64BIT
+ select PHYS_ADDR_T_64BIT
default n
help
Choose this option if you want to enable the Extended Physical
@@ -2399,9 +2399,6 @@ config SB1_PASS_2_1_WORKAROUNDS
default y
-config ARCH_PHYS_ADDR_T_64BIT
- bool
-
choice
prompt "SmartMIPS or microMIPS ASE support"
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index cc9a616d8934..b3d091d65e05 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -13,11 +13,8 @@ config 64BIT
bool
default y if PPC64
-config ARCH_PHYS_ADDR_T_64BIT
- def_bool PPC64 || PHYS_64BIT
-
config ARCH_DMA_ADDR_T_64BIT
- def_bool ARCH_PHYS_ADDR_T_64BIT
+ def_bool PHYS_ADDR_T_64BIT
config MMU
bool
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 67d3125d0610..84b58abc08ee 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -222,6 +222,7 @@ config PTE_64BIT
config PHYS_64BIT
bool 'Large physical address support' if E500 || PPC_86xx
depends on (44x || E500 || PPC_86xx) && !PPC_83xx && !PPC_82xx
+ select PHYS_ADDR_T_64BIT
---help---
This option enables kernel support for larger than 32-bit physical
addresses. This feature may not be available on all cores.
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 23d8acca5c90..f52f86f43a4b 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -5,6 +5,8 @@
config RISCV
def_bool y
+ # even on 32-bit, physical (and DMA) addresses are > 32-bits
+ select PHYS_ADDR_T_64BIT
select OF
select OF_EARLY_FLATTREE
select OF_IRQ
@@ -38,10 +40,6 @@ config RISCV
config MMU
def_bool y
-# even on 32-bit, physical (and DMA) addresses are > 32-bits
-config ARCH_PHYS_ADDR_T_64BIT
- def_bool y
-
config ZONE_DMA32
bool
default y
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index a98a9b14fda2..8fccdaf02bb0 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1448,6 +1448,7 @@ config HIGHMEM
config X86_PAE
bool "PAE (Physical Address Extension) Support"
depends on X86_32 && !HIGHMEM4G
+ select PHYS_ADDR_T_64BIT
select SWIOTLB
---help---
PAE is required for NX support, and furthermore enables
@@ -1475,10 +1476,6 @@ config X86_5LEVEL
Say N if unsure.
-config ARCH_PHYS_ADDR_T_64BIT
- def_bool y
- depends on X86_64 || X86_PAE
-
config ARCH_DMA_ADDR_T_64BIT
def_bool y
depends on X86_64 || HIGHMEM64G
diff --git a/mm/Kconfig b/mm/Kconfig
index d5004d82a1d6..a3f0005ac212 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -266,7 +266,7 @@ config ARCH_ENABLE_THP_MIGRATION
bool
config PHYS_ADDR_T_64BIT
- def_bool 64BIT || ARCH_PHYS_ADDR_T_64BIT
+ def_bool 64BIT
config BOUNCE
bool "Enable bounce buffers"
--
2.17.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: [PATCH 07/13] arch: remove the ARCH_PHYS_ADDR_T_64BIT config symbol
2018-04-25 5:15 ` [PATCH 07/13] arch: remove the ARCH_PHYS_ADDR_T_64BIT config symbol Christoph Hellwig
@ 2018-05-02 20:11 ` James Hogan
0 siblings, 0 replies; 22+ messages in thread
From: James Hogan @ 2018-05-02 20:11 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-mips, sstabellini, Konrad Rzeszutek Wilk, linux-pci, x86,
linux-mm, iommu, sparclinux, linux-arm-kernel
[-- Attachment #1.1: Type: text/plain, Size: 374 bytes --]
On Wed, Apr 25, 2018 at 07:15:33AM +0200, Christoph Hellwig wrote:
> Instead select the PHYS_ADDR_T_64BIT for 32-bit architectures that need a
> 64-bit phys_addr_t type directly.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> arch/mips/Kconfig | 15 ++++++---------
For MIPS:
Acked-by: James Hogan <jhogan@kernel.org>
Cheers
James
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 08/13] arch: define the ARCH_DMA_ADDR_T_64BIT config symbol in lib/Kconfig
2018-04-25 5:15 centralize SWIOTLB config symbol and misc other cleanups V3 Christoph Hellwig
` (6 preceding siblings ...)
2018-04-25 5:15 ` [PATCH 07/13] arch: remove the ARCH_PHYS_ADDR_T_64BIT config symbol Christoph Hellwig
@ 2018-04-25 5:15 ` Christoph Hellwig
2018-05-02 22:09 ` James Hogan
2018-04-25 5:15 ` [PATCH 09/13] PCI: remove CONFIG_PCI_BUS_ADDR_T_64BIT Christoph Hellwig
` (5 subsequent siblings)
13 siblings, 1 reply; 22+ messages in thread
From: Christoph Hellwig @ 2018-04-25 5:15 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk, iommu
Cc: sstabellini, x86, linux-pci, linux-mm, linux-mips, sparclinux,
linux-arm-kernel
Define this symbol if the architecture either uses 64-bit pointers or the
PHYS_ADDR_T_64BIT is set. This covers 95% of the old arch magic. We only
need an additional select for Xen on ARM (why anyway?), and we now always
set ARCH_DMA_ADDR_T_64BIT on mips boards with 64-bit physical addressing
instead of only doing it when highmem is set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
arch/alpha/Kconfig | 3 ---
arch/arc/Kconfig | 3 ---
arch/arm/mach-axxia/Kconfig | 1 -
arch/arm/mach-bcm/Kconfig | 1 -
arch/arm/mach-exynos/Kconfig | 1 -
arch/arm/mach-highbank/Kconfig | 1 -
arch/arm/mach-rockchip/Kconfig | 1 -
arch/arm/mach-shmobile/Kconfig | 1 -
arch/arm/mach-tegra/Kconfig | 1 -
arch/arm/mm/Kconfig | 3 ---
arch/arm64/Kconfig | 3 ---
arch/ia64/Kconfig | 3 ---
arch/mips/Kconfig | 3 ---
arch/powerpc/Kconfig | 3 ---
arch/riscv/Kconfig | 3 ---
arch/s390/Kconfig | 3 ---
arch/sparc/Kconfig | 4 ----
arch/x86/Kconfig | 4 ----
lib/Kconfig | 3 +++
19 files changed, 3 insertions(+), 42 deletions(-)
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 1fd9645b0c67..aa7df1a36fd0 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -66,9 +66,6 @@ config ZONE_DMA
bool
default y
-config ARCH_DMA_ADDR_T_64BIT
- def_bool y
-
config GENERIC_ISA_DMA
bool
default y
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index f94c61da682a..7498aca4b887 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -458,9 +458,6 @@ config ARC_HAS_PAE40
Enable access to physical memory beyond 4G, only supported on
ARC cores with 40 bit Physical Addressing support
-config ARCH_DMA_ADDR_T_64BIT
- bool
-
config ARC_KVADDR_SIZE
int "Kernel Virtual Address Space size (MB)"
range 0 512
diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig
index bb2ce1c63fd9..d3eae6037913 100644
--- a/arch/arm/mach-axxia/Kconfig
+++ b/arch/arm/mach-axxia/Kconfig
@@ -2,7 +2,6 @@
config ARCH_AXXIA
bool "LSI Axxia platforms"
depends on ARCH_MULTI_V7 && ARM_LPAE
- select ARCH_DMA_ADDR_T_64BIT
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index c2f3b0d216a4..c46a728df44e 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -211,7 +211,6 @@ config ARCH_BRCMSTB
select BRCMSTB_L2_IRQ
select BCM7120_L2_IRQ
select ARCH_HAS_HOLES_MEMORYMODEL
- select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ZONE_DMA if ARM_LPAE
select SOC_BRCMSTB
select SOC_BUS
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 647c319f9f5f..2ca405816846 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -112,7 +112,6 @@ config SOC_EXYNOS5440
bool "SAMSUNG EXYNOS5440"
default y
depends on ARCH_EXYNOS5
- select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select HAVE_ARM_ARCH_TIMER
select AUTO_ZRELADDR
select PINCTRL_EXYNOS5440
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 81110ec34226..5552968f07f8 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -1,7 +1,6 @@
config ARCH_HIGHBANK
bool "Calxeda ECX-1000/2000 (Highbank/Midway)"
depends on ARCH_MULTI_V7
- select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_SUPPORTS_BIG_ENDIAN
select ARM_AMBA
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index a4065966881a..fafd3d7f9f8c 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -3,7 +3,6 @@ config ARCH_ROCKCHIP
depends on ARCH_MULTI_V7
select PINCTRL
select PINCTRL_ROCKCHIP
- select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_HAS_RESET_CONTROLLER
select ARM_AMBA
select ARM_GIC
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 280e7312a9e1..fe60cd09a5ca 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -29,7 +29,6 @@ config ARCH_RMOBILE
menuconfig ARCH_RENESAS
bool "Renesas ARM SoCs"
depends on ARCH_MULTI_V7 && MMU
- select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_SHMOBILE
select ARM_GIC
select GPIOLIB
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 1e0aeb47bac6..7f3b83e0d324 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -15,6 +15,5 @@ menuconfig ARCH_TEGRA
select RESET_CONTROLLER
select SOC_BUS
select ZONE_DMA if ARM_LPAE
- select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
help
This enables support for NVIDIA Tegra based systems.
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 2f77c6344ef1..5a016bc80e26 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -674,9 +674,6 @@ config ARM_PV_FIXUP
def_bool y
depends on ARM_LPAE && ARM_PATCH_PHYS_VIRT && ARCH_KEYSTONE
-config ARCH_DMA_ADDR_T_64BIT
- bool
-
config ARM_THUMB
bool "Support Thumb user binaries" if !CPU_THUMBONLY && EXPERT
depends on CPU_THUMB_CAPABLE
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index b6aa33e642cc..4d924eb32e7f 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -236,9 +236,6 @@ config ZONE_DMA32
config HAVE_GENERIC_GUP
def_bool y
-config ARCH_DMA_ADDR_T_64BIT
- def_bool y
-
config SMP
def_bool y
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 0e42731adaf1..685d557eea48 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -80,9 +80,6 @@ config MMU
bool
default y
-config ARCH_DMA_ADDR_T_64BIT
- def_bool y
-
config SWIOTLB
bool
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 985388078872..e10cc5c7be69 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1101,9 +1101,6 @@ config GPIO_TXX9
config FW_CFE
bool
-config ARCH_DMA_ADDR_T_64BIT
- def_bool (HIGHMEM && PHYS_ADDR_T_64BIT) || 64BIT
-
config ARCH_SUPPORTS_UPROBES
bool
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index b3d091d65e05..a4b2ac7c3d2e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -13,9 +13,6 @@ config 64BIT
bool
default y if PPC64
-config ARCH_DMA_ADDR_T_64BIT
- def_bool PHYS_ADDR_T_64BIT
-
config MMU
bool
default y
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index f52f86f43a4b..17212ba54ee3 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -44,9 +44,6 @@ config ZONE_DMA32
bool
default y
-config ARCH_DMA_ADDR_T_64BIT
- def_bool y
-
config PAGE_OFFSET
hex
default 0xC0000000 if 32BIT && MAXPHYSMEM_2GB
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 89a007672f70..b794a2ab6d15 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -35,9 +35,6 @@ config GENERIC_BUG
config GENERIC_BUG_RELATIVE_POINTERS
def_bool y
-config ARCH_DMA_ADDR_T_64BIT
- def_bool y
-
config GENERIC_LOCKBREAK
def_bool y if SMP && PREEMPT
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index be770b511ddd..c1cfc17eb504 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -105,10 +105,6 @@ config ARCH_ATU
bool
default y if SPARC64
-config ARCH_DMA_ADDR_T_64BIT
- bool
- default y if ARCH_ATU
-
config STACKTRACE_SUPPORT
bool
default y if SPARC64
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 8fccdaf02bb0..07b031f99eb1 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1476,10 +1476,6 @@ config X86_5LEVEL
Say N if unsure.
-config ARCH_DMA_ADDR_T_64BIT
- def_bool y
- depends on X86_64 || HIGHMEM64G
-
config X86_DIRECT_GBPAGES
def_bool y
depends on X86_64 && !DEBUG_PAGEALLOC
diff --git a/lib/Kconfig b/lib/Kconfig
index ce9fa962d59b..1f12faf03819 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -435,6 +435,9 @@ config NEED_SG_DMA_LENGTH
config NEED_DMA_MAP_STATE
bool
+config ARCH_DMA_ADDR_T_64BIT
+ def_bool 64BIT || PHYS_ADDR_T_64BIT
+
config IOMMU_HELPER
bool
--
2.17.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: [PATCH 08/13] arch: define the ARCH_DMA_ADDR_T_64BIT config symbol in lib/Kconfig
2018-04-25 5:15 ` [PATCH 08/13] arch: define the ARCH_DMA_ADDR_T_64BIT config symbol in lib/Kconfig Christoph Hellwig
@ 2018-05-02 22:09 ` James Hogan
0 siblings, 0 replies; 22+ messages in thread
From: James Hogan @ 2018-05-02 22:09 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-mips, sstabellini, Konrad Rzeszutek Wilk, linux-pci, x86,
linux-mm, iommu, sparclinux, linux-arm-kernel
[-- Attachment #1.1: Type: text/plain, Size: 1310 bytes --]
On Wed, Apr 25, 2018 at 07:15:34AM +0200, Christoph Hellwig wrote:
> Define this symbol if the architecture either uses 64-bit pointers or the
> PHYS_ADDR_T_64BIT is set. This covers 95% of the old arch magic. We only
> need an additional select for Xen on ARM (why anyway?), and we now always
> set ARCH_DMA_ADDR_T_64BIT on mips boards with 64-bit physical addressing
> instead of only doing it when highmem is set.
I think this should be fine. It only affects alchemy and Netlogic, and
Netlogic supports highmem already.
So for MIPS:
Acked-by: James Hogan <jhogan@kernel.org>
Cheers
James
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index 985388078872..e10cc5c7be69 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -1101,9 +1101,6 @@ config GPIO_TXX9
> config FW_CFE
> bool
>
> -config ARCH_DMA_ADDR_T_64BIT
> - def_bool (HIGHMEM && PHYS_ADDR_T_64BIT) || 64BIT
> -
> config ARCH_SUPPORTS_UPROBES
> bool
> diff --git a/lib/Kconfig b/lib/Kconfig
> index ce9fa962d59b..1f12faf03819 100644
> --- a/lib/Kconfig
> +++ b/lib/Kconfig
> @@ -435,6 +435,9 @@ config NEED_SG_DMA_LENGTH
> config NEED_DMA_MAP_STATE
> bool
>
> +config ARCH_DMA_ADDR_T_64BIT
> + def_bool 64BIT || PHYS_ADDR_T_64BIT
> +
> config IOMMU_HELPER
> bool
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 09/13] PCI: remove CONFIG_PCI_BUS_ADDR_T_64BIT
2018-04-25 5:15 centralize SWIOTLB config symbol and misc other cleanups V3 Christoph Hellwig
` (7 preceding siblings ...)
2018-04-25 5:15 ` [PATCH 08/13] arch: define the ARCH_DMA_ADDR_T_64BIT config symbol in lib/Kconfig Christoph Hellwig
@ 2018-04-25 5:15 ` Christoph Hellwig
2018-04-25 5:15 ` [PATCH 10/13] arm: don't build swiotlb by default Christoph Hellwig
` (4 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Christoph Hellwig @ 2018-04-25 5:15 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk, iommu
Cc: sstabellini, x86, linux-pci, linux-mm, linux-mips, sparclinux,
linux-arm-kernel
This symbol is now always identical to CONFIG_ARCH_DMA_ADDR_T_64BIT, so
remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/pci/Kconfig | 4 ----
drivers/pci/bus.c | 4 ++--
include/linux/pci.h | 2 +-
3 files changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 34b56a8f8480..29a487f31dae 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -5,10 +5,6 @@
source "drivers/pci/pcie/Kconfig"
-config PCI_BUS_ADDR_T_64BIT
- def_bool y if (ARCH_DMA_ADDR_T_64BIT || 64BIT)
- depends on PCI
-
config PCI_MSI
bool "Message Signaled Interrupts (MSI and MSI-X)"
depends on PCI
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index bc2ded4c451f..35b7fc87eac5 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -120,7 +120,7 @@ int devm_request_pci_bus_resources(struct device *dev,
EXPORT_SYMBOL_GPL(devm_request_pci_bus_resources);
static struct pci_bus_region pci_32_bit = {0, 0xffffffffULL};
-#ifdef CONFIG_PCI_BUS_ADDR_T_64BIT
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
static struct pci_bus_region pci_64_bit = {0,
(pci_bus_addr_t) 0xffffffffffffffffULL};
static struct pci_bus_region pci_high = {(pci_bus_addr_t) 0x100000000ULL,
@@ -230,7 +230,7 @@ int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
resource_size_t),
void *alignf_data)
{
-#ifdef CONFIG_PCI_BUS_ADDR_T_64BIT
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
int rc;
if (res->flags & IORESOURCE_MEM_64) {
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 73178a2fcee0..55371cb827ad 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -670,7 +670,7 @@ int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
int reg, int len, u32 val);
-#ifdef CONFIG_PCI_BUS_ADDR_T_64BIT
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
typedef u64 pci_bus_addr_t;
#else
typedef u32 pci_bus_addr_t;
--
2.17.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 10/13] arm: don't build swiotlb by default
2018-04-25 5:15 centralize SWIOTLB config symbol and misc other cleanups V3 Christoph Hellwig
` (8 preceding siblings ...)
2018-04-25 5:15 ` [PATCH 09/13] PCI: remove CONFIG_PCI_BUS_ADDR_T_64BIT Christoph Hellwig
@ 2018-04-25 5:15 ` Christoph Hellwig
2018-04-25 5:15 ` [PATCH 11/13] mips,unicore32: swiotlb doesn't need sg->dma_length Christoph Hellwig
` (3 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Christoph Hellwig @ 2018-04-25 5:15 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk, iommu
Cc: sstabellini, x86, linux-pci, linux-mm, linux-mips, sparclinux,
linux-arm-kernel
swiotlb is only used as a library of helper for xen-swiotlb if Xen support
is enabled on arm, so don't build it by default.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
arch/arm/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aa1c187d756d..90b81a3a28a7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1774,7 +1774,7 @@ config SECCOMP
defined by each seccomp mode.
config SWIOTLB
- def_bool y
+ bool
config PARAVIRT
bool "Enable paravirtualization code"
@@ -1807,6 +1807,7 @@ config XEN
depends on MMU
select ARCH_DMA_ADDR_T_64BIT
select ARM_PSCI
+ select SWIOTLB
select SWIOTLB_XEN
select PARAVIRT
help
--
2.17.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 11/13] mips,unicore32: swiotlb doesn't need sg->dma_length
2018-04-25 5:15 centralize SWIOTLB config symbol and misc other cleanups V3 Christoph Hellwig
` (9 preceding siblings ...)
2018-04-25 5:15 ` [PATCH 10/13] arm: don't build swiotlb by default Christoph Hellwig
@ 2018-04-25 5:15 ` Christoph Hellwig
2018-05-02 22:20 ` [PATCH 11/13] mips, unicore32: " James Hogan
2018-04-25 5:15 ` [PATCH 12/13] swiotlb: move the SWIOTLB config symbol to lib/Kconfig Christoph Hellwig
` (2 subsequent siblings)
13 siblings, 1 reply; 22+ messages in thread
From: Christoph Hellwig @ 2018-04-25 5:15 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk, iommu
Cc: sstabellini, x86, linux-pci, linux-mm, linux-mips, sparclinux,
linux-arm-kernel
Only mips and unicore32 select CONFIG_NEED_SG_DMA_LENGTH when building
swiotlb. swiotlb itself never merges segements and doesn't accesses the
dma_length field directly, so drop the dependency.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
arch/mips/cavium-octeon/Kconfig | 1 -
arch/mips/loongson64/Kconfig | 1 -
arch/unicore32/mm/Kconfig | 1 -
3 files changed, 3 deletions(-)
diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig
index 5d73041547a7..eb5faeed4f66 100644
--- a/arch/mips/cavium-octeon/Kconfig
+++ b/arch/mips/cavium-octeon/Kconfig
@@ -70,7 +70,6 @@ config CAVIUM_OCTEON_LOCK_L2_MEMCPY
config SWIOTLB
def_bool y
select DMA_DIRECT_OPS
- select NEED_SG_DMA_LENGTH
config OCTEON_ILM
tristate "Module to measure interrupt latency using Octeon CIU Timer"
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index 641a1477031e..2a4fb91adbb6 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -135,7 +135,6 @@ config SWIOTLB
default y
depends on CPU_LOONGSON3
select DMA_DIRECT_OPS
- select NEED_SG_DMA_LENGTH
select NEED_DMA_MAP_STATE
config PHYS48_TO_HT40
diff --git a/arch/unicore32/mm/Kconfig b/arch/unicore32/mm/Kconfig
index 1d9fed0ada71..45b7f769375e 100644
--- a/arch/unicore32/mm/Kconfig
+++ b/arch/unicore32/mm/Kconfig
@@ -43,4 +43,3 @@ config CPU_TLB_SINGLE_ENTRY_DISABLE
config SWIOTLB
def_bool y
select DMA_DIRECT_OPS
- select NEED_SG_DMA_LENGTH
--
2.17.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: [PATCH 11/13] mips, unicore32: swiotlb doesn't need sg->dma_length
2018-04-25 5:15 ` [PATCH 11/13] mips,unicore32: swiotlb doesn't need sg->dma_length Christoph Hellwig
@ 2018-05-02 22:20 ` James Hogan
2018-05-03 3:56 ` [PATCH 11/13] mips,unicore32: " Christoph Hellwig
0 siblings, 1 reply; 22+ messages in thread
From: James Hogan @ 2018-05-02 22:20 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-mips, sstabellini, Konrad Rzeszutek Wilk, linux-pci, x86,
linux-mm, iommu, sparclinux, linux-arm-kernel
[-- Attachment #1.1: Type: text/plain, Size: 400 bytes --]
On Wed, Apr 25, 2018 at 07:15:37AM +0200, Christoph Hellwig wrote:
> Only mips and unicore32 select CONFIG_NEED_SG_DMA_LENGTH when building
> swiotlb. swiotlb itself never merges segements and doesn't accesses the
> dma_length field directly, so drop the dependency.
Is that at odds with Documentation/DMA-API-HOWTO.txt, which seems to
suggest arch ports should enable it for IOMMUs?
Cheers
James
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 11/13] mips,unicore32: swiotlb doesn't need sg->dma_length
2018-05-02 22:20 ` [PATCH 11/13] mips, unicore32: " James Hogan
@ 2018-05-03 3:56 ` Christoph Hellwig
2018-05-03 6:47 ` [PATCH 11/13] mips, unicore32: " James Hogan
0 siblings, 1 reply; 22+ messages in thread
From: Christoph Hellwig @ 2018-05-03 3:56 UTC (permalink / raw)
To: James Hogan
Cc: Christoph Hellwig, Konrad Rzeszutek Wilk, iommu, sstabellini,
x86, linux-pci, linux-mm, linux-mips, sparclinux,
linux-arm-kernel
On Wed, May 02, 2018 at 11:20:18PM +0100, James Hogan wrote:
> On Wed, Apr 25, 2018 at 07:15:37AM +0200, Christoph Hellwig wrote:
> > Only mips and unicore32 select CONFIG_NEED_SG_DMA_LENGTH when building
> > swiotlb. swiotlb itself never merges segements and doesn't accesses the
> > dma_length field directly, so drop the dependency.
>
> Is that at odds with Documentation/DMA-API-HOWTO.txt, which seems to
> suggest arch ports should enable it for IOMMUs?
swiotlb isn't really an iommu.. That being said iommus don't have to
merge segments either if they don't want to, and we have various
implementations that don't. The whole dma api documentation needs
a major overhaul, including merging the various files and dropping a lot
of dead wood. It has been on my todo list for a while, with an inner
hope that someone else would do it before me.
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 11/13] mips, unicore32: swiotlb doesn't need sg->dma_length
2018-05-03 3:56 ` [PATCH 11/13] mips,unicore32: " Christoph Hellwig
@ 2018-05-03 6:47 ` James Hogan
0 siblings, 0 replies; 22+ messages in thread
From: James Hogan @ 2018-05-03 6:47 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-mips, sstabellini, Konrad Rzeszutek Wilk, linux-pci, x86,
linux-mm, iommu, sparclinux, linux-arm-kernel
[-- Attachment #1.1: Type: text/plain, Size: 1045 bytes --]
On Thu, May 03, 2018 at 05:56:43AM +0200, Christoph Hellwig wrote:
> On Wed, May 02, 2018 at 11:20:18PM +0100, James Hogan wrote:
> > On Wed, Apr 25, 2018 at 07:15:37AM +0200, Christoph Hellwig wrote:
> > > Only mips and unicore32 select CONFIG_NEED_SG_DMA_LENGTH when building
> > > swiotlb. swiotlb itself never merges segements and doesn't accesses the
> > > dma_length field directly, so drop the dependency.
> >
> > Is that at odds with Documentation/DMA-API-HOWTO.txt, which seems to
> > suggest arch ports should enable it for IOMMUs?
>
> swiotlb isn't really an iommu.. That being said iommus don't have to
> merge segments either if they don't want to, and we have various
> implementations that don't. The whole dma api documentation needs
> a major overhaul, including merging the various files and dropping a lot
> of dead wood. It has been on my todo list for a while, with an inner
> hope that someone else would do it before me.
Okay, for MIPS:
Acked-by: James Hogan <jhogan@kernel.org>
Cheers
James
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 12/13] swiotlb: move the SWIOTLB config symbol to lib/Kconfig
2018-04-25 5:15 centralize SWIOTLB config symbol and misc other cleanups V3 Christoph Hellwig
` (10 preceding siblings ...)
2018-04-25 5:15 ` [PATCH 11/13] mips,unicore32: swiotlb doesn't need sg->dma_length Christoph Hellwig
@ 2018-04-25 5:15 ` Christoph Hellwig
2018-04-25 5:15 ` [PATCH 13/13] swiotlb: remove the CONFIG_DMA_DIRECT_OPS ifdefs Christoph Hellwig
2018-05-02 12:46 ` centralize SWIOTLB config symbol and misc other cleanups V3 Christoph Hellwig
13 siblings, 0 replies; 22+ messages in thread
From: Christoph Hellwig @ 2018-04-25 5:15 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk, iommu
Cc: sstabellini, x86, linux-pci, linux-mm, linux-mips, sparclinux,
linux-arm-kernel
This way we have one central definition of it, and user can select it as
needed. The new option is not user visible, which is the behavior
it had in most architectures, with a few notable exceptions:
- On x86_64 and mips/loongson3 it used to be user selectable, but
defaulted to y. It now is unconditional, which seems like the right
thing for 64-bit architectures without guaranteed availablity of
IOMMUs.
- on powerpc the symbol is user selectable and defaults to n, but
many boards select it. This change assumes no working setup
required a manual selection, but if that turned out to be wrong
we'll have to add another select statement or two for the respective
boards.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
arch/arm/Kconfig | 3 ---
arch/arm64/Kconfig | 4 +---
arch/ia64/Kconfig | 8 --------
arch/mips/Kconfig | 2 ++
arch/mips/cavium-octeon/Kconfig | 4 ----
arch/mips/loongson64/Kconfig | 7 -------
arch/powerpc/Kconfig | 9 ---------
arch/unicore32/Kconfig | 1 +
arch/unicore32/mm/Kconfig | 4 ----
arch/x86/Kconfig | 12 +-----------
lib/Kconfig | 5 +++++
11 files changed, 10 insertions(+), 49 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 90b81a3a28a7..676977bdfe33 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1773,9 +1773,6 @@ config SECCOMP
and the task is only allowed to execute a few safe syscalls
defined by each seccomp mode.
-config SWIOTLB
- bool
-
config PARAVIRT
bool "Enable paravirtualization code"
help
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 4d924eb32e7f..db51b6445744 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -144,6 +144,7 @@ config ARM64
select POWER_SUPPLY
select REFCOUNT_FULL
select SPARSE_IRQ
+ select SWIOTLB
select SYSCTL_EXCEPTION_TRACE
select THREAD_INFO_IN_TASK
help
@@ -239,9 +240,6 @@ config HAVE_GENERIC_GUP
config SMP
def_bool y
-config SWIOTLB
- def_bool y
-
config KERNEL_MODE_NEON
def_bool y
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 685d557eea48..9485b5490eca 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -80,9 +80,6 @@ config MMU
bool
default y
-config SWIOTLB
- bool
-
config STACKTRACE_SUPPORT
def_bool y
@@ -139,7 +136,6 @@ config IA64_GENERIC
bool "generic"
select NUMA
select ACPI_NUMA
- select DMA_DIRECT_OPS
select SWIOTLB
select PCI_MSI
help
@@ -160,7 +156,6 @@ config IA64_GENERIC
config IA64_DIG
bool "DIG-compliant"
- select DMA_DIRECT_OPS
select SWIOTLB
config IA64_DIG_VTD
@@ -176,7 +171,6 @@ config IA64_HP_ZX1
config IA64_HP_ZX1_SWIOTLB
bool "HP-zx1/sx1000 with software I/O TLB"
- select DMA_DIRECT_OPS
select SWIOTLB
help
Build a kernel that runs on HP zx1 and sx1000 systems even when they
@@ -200,7 +194,6 @@ config IA64_SGI_UV
bool "SGI-UV"
select NUMA
select ACPI_NUMA
- select DMA_DIRECT_OPS
select SWIOTLB
help
Selecting this option will optimize the kernel for use on UV based
@@ -211,7 +204,6 @@ config IA64_SGI_UV
config IA64_HP_SIM
bool "Ski-simulator"
- select DMA_DIRECT_OPS
select SWIOTLB
depends on !PM
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e10cc5c7be69..0f619b8c0e9e 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -912,6 +912,7 @@ config CAVIUM_OCTEON_SOC
select MIPS_NR_CPU_NR_MAP_1024
select BUILTIN_DTB
select MTD_COMPLEX_MAPPINGS
+ select SWIOTLB
select SYS_SUPPORTS_RELOCATABLE
help
This option supports all of the Octeon reference boards from Cavium
@@ -1367,6 +1368,7 @@ config CPU_LOONGSON3
select MIPS_PGD_C0_CONTEXT
select MIPS_L1_CACHE_SHIFT_6
select GPIOLIB
+ select SWIOTLB
help
The Loongson 3 processor implements the MIPS64R2 instruction
set with many extensions.
diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig
index eb5faeed4f66..4984e462be30 100644
--- a/arch/mips/cavium-octeon/Kconfig
+++ b/arch/mips/cavium-octeon/Kconfig
@@ -67,10 +67,6 @@ config CAVIUM_OCTEON_LOCK_L2_MEMCPY
help
Lock the kernel's implementation of memcpy() into L2.
-config SWIOTLB
- def_bool y
- select DMA_DIRECT_OPS
-
config OCTEON_ILM
tristate "Module to measure interrupt latency using Octeon CIU Timer"
help
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index 2a4fb91adbb6..c79e6a565572 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -130,13 +130,6 @@ config LOONGSON_UART_BASE
default y
depends on EARLY_PRINTK || SERIAL_8250
-config SWIOTLB
- bool "Soft IOMMU Support for All-Memory DMA"
- default y
- depends on CPU_LOONGSON3
- select DMA_DIRECT_OPS
- select NEED_DMA_MAP_STATE
-
config PHYS48_TO_HT40
bool
default y if CPU_LOONGSON3
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a4b2ac7c3d2e..1887f8f86a77 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -474,15 +474,6 @@ config MPROFILE_KERNEL
depends on PPC64 && CPU_LITTLE_ENDIAN
def_bool !DISABLE_MPROFILE_KERNEL
-config SWIOTLB
- bool "SWIOTLB support"
- default n
- ---help---
- Support for IO bounce buffering for systems without an IOMMU.
- This allows us to DMA to the full physical address space on
- platforms where the size of a physical address is larger
- than the bus address. Not all platforms support this.
-
config HOTPLUG_CPU
bool "Support for enabling/disabling CPUs"
depends on SMP && (PPC_PSERIES || \
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index 82195714d20b..03f991e44288 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -20,6 +20,7 @@ config UNICORE32
select GENERIC_IOMAP
select MODULES_USE_ELF_REL
select NEED_DMA_MAP_STATE
+ select SWIOTLB
help
UniCore-32 is 32-bit Instruction Set Architecture,
including a series of low-power-consumption RISC chip
diff --git a/arch/unicore32/mm/Kconfig b/arch/unicore32/mm/Kconfig
index 45b7f769375e..82759b6aba67 100644
--- a/arch/unicore32/mm/Kconfig
+++ b/arch/unicore32/mm/Kconfig
@@ -39,7 +39,3 @@ config CPU_TLB_SINGLE_ENTRY_DISABLE
default y
help
Say Y here to disable the TLB single entry operations.
-
-config SWIOTLB
- def_bool y
- select DMA_DIRECT_OPS
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 07b031f99eb1..aad35c568681 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -29,6 +29,7 @@ config X86_64
select HAVE_ARCH_SOFT_DIRTY
select MODULES_USE_ELF_RELA
select NEED_DMA_MAP_STATE
+ select SWIOTLB
select X86_DEV_DMA_OPS
select ARCH_HAS_SYSCALL_WRAPPER
@@ -916,17 +917,6 @@ config CALGARY_IOMMU_ENABLED_BY_DEFAULT
Calgary anyway, pass 'iommu=calgary' on the kernel command line.
If unsure, say Y.
-# need this always selected by IOMMU for the VIA workaround
-config SWIOTLB
- def_bool y if X86_64
- select NEED_DMA_MAP_STATE
- ---help---
- Support for software bounce buffers used on x86-64 systems
- which don't have a hardware IOMMU. Using this PCI devices
- which can only access 32-bits of memory can be used on systems
- with more than 3 GB of memory.
- If unsure, say Y.
-
config MAXSMP
bool "Enable Maximum number of SMP Processors and NUMA Nodes"
depends on X86_64 && SMP && DEBUG_KERNEL
diff --git a/lib/Kconfig b/lib/Kconfig
index 1f12faf03819..1d84e61cccfe 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -451,6 +451,11 @@ config DMA_VIRT_OPS
depends on HAS_DMA && (!64BIT || ARCH_DMA_ADDR_T_64BIT)
default n
+config SWIOTLB
+ bool
+ select DMA_DIRECT_OPS
+ select NEED_DMA_MAP_STATE
+
config CHECK_SIGNATURE
bool
--
2.17.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 13/13] swiotlb: remove the CONFIG_DMA_DIRECT_OPS ifdefs
2018-04-25 5:15 centralize SWIOTLB config symbol and misc other cleanups V3 Christoph Hellwig
` (11 preceding siblings ...)
2018-04-25 5:15 ` [PATCH 12/13] swiotlb: move the SWIOTLB config symbol to lib/Kconfig Christoph Hellwig
@ 2018-04-25 5:15 ` Christoph Hellwig
2018-05-02 12:46 ` centralize SWIOTLB config symbol and misc other cleanups V3 Christoph Hellwig
13 siblings, 0 replies; 22+ messages in thread
From: Christoph Hellwig @ 2018-04-25 5:15 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk, iommu
Cc: sstabellini, x86, linux-pci, linux-mm, linux-mips, sparclinux,
linux-arm-kernel
swiotlb now selects the DMA_DIRECT_OPS config symbol, so this will
always be true.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
lib/swiotlb.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index fece57566d45..6954f7ad200a 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -692,7 +692,6 @@ void swiotlb_tbl_sync_single(struct device *hwdev, phys_addr_t tlb_addr,
}
}
-#ifdef CONFIG_DMA_DIRECT_OPS
static inline bool dma_coherent_ok(struct device *dev, dma_addr_t addr,
size_t size)
{
@@ -764,7 +763,6 @@ static bool swiotlb_free_buffer(struct device *dev, size_t size,
DMA_ATTR_SKIP_CPU_SYNC);
return true;
}
-#endif
static void
swiotlb_full(struct device *dev, size_t size, enum dma_data_direction dir,
@@ -1045,7 +1043,6 @@ swiotlb_dma_supported(struct device *hwdev, u64 mask)
return __phys_to_dma(hwdev, io_tlb_end - 1) <= mask;
}
-#ifdef CONFIG_DMA_DIRECT_OPS
void *swiotlb_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
gfp_t gfp, unsigned long attrs)
{
@@ -1089,4 +1086,3 @@ const struct dma_map_ops swiotlb_dma_ops = {
.unmap_page = swiotlb_unmap_page,
.dma_supported = dma_direct_supported,
};
-#endif /* CONFIG_DMA_DIRECT_OPS */
--
2.17.0
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: centralize SWIOTLB config symbol and misc other cleanups V3
2018-04-25 5:15 centralize SWIOTLB config symbol and misc other cleanups V3 Christoph Hellwig
` (12 preceding siblings ...)
2018-04-25 5:15 ` [PATCH 13/13] swiotlb: remove the CONFIG_DMA_DIRECT_OPS ifdefs Christoph Hellwig
@ 2018-05-02 12:46 ` Christoph Hellwig
2018-05-09 5:03 ` Christoph Hellwig
13 siblings, 1 reply; 22+ messages in thread
From: Christoph Hellwig @ 2018-05-02 12:46 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-mips, sstabellini, Konrad Rzeszutek Wilk, linux-pci, x86,
linux-mm, iommu, sparclinux, linux-arm-kernel
Any more comments? Especially from the x86, mips and powerpc arch
maintainers? I'd like to merge this in a few days as various other
patches depend on it.
On Wed, Apr 25, 2018 at 07:15:26AM +0200, Christoph Hellwig wrote:
> Hi all,
>
> this seris aims for a single defintion of the Kconfig symbol. To get
> there various cleanups, mostly about config symbols are included as well.
>
> Changes since V2:
> - swiotlb doesn't need the dma_length field by itself, so don't select it
> - don't offer a user visible SWIOTLB choice
>
> Chages since V1:
> - fixed a incorrect Reviewed-by that should be a Signed-off-by.
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
---end quoted text---
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: centralize SWIOTLB config symbol and misc other cleanups V3
2018-05-02 12:46 ` centralize SWIOTLB config symbol and misc other cleanups V3 Christoph Hellwig
@ 2018-05-09 5:03 ` Christoph Hellwig
0 siblings, 0 replies; 22+ messages in thread
From: Christoph Hellwig @ 2018-05-09 5:03 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-mips, sstabellini, Konrad Rzeszutek Wilk, linux-pci, x86,
linux-mm, iommu, sparclinux, Christoph Hellwig, linux-arm-kernel
On Wed, May 02, 2018 at 05:46:17AM -0700, Christoph Hellwig wrote:
> Any more comments? Especially from the x86, mips and powerpc arch
> maintainers? I'd like to merge this in a few days as various other
> patches depend on it.
I've pulled it in to make forward progress. Any additional comments
will have to be sent in the form of incremental patches.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 22+ messages in thread