[PATCH 6/6] PCI: rcar: Shut the PHY down in failpath

[Marek Vasut <marek.vasut@gmail.com>]

If anything fails past phy_init_fn() and the system is a Gen3 with
a PHY, the PHY will be left on and inited. This is caused by the
phy_init_fn, which is in fact a pointer to rcar_pcie_phy_init_gen3()
function, which starts the PHY, yet has no counterpart in the failpath.
Add that counterpart.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
Fixes: 517ca93a7159 ("PCI: rcar: Add R-Car gen3 PHY support")
---
 drivers/pci/host/pcie-rcar.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 636c3c5095d2..695781934f0a 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -1163,7 +1163,7 @@ static int rcar_pcie_probe(struct platform_device *pdev)
 	if (rcar_pcie_hw_init(pcie)) {
 		dev_info(dev, "PCIe link down\n");
 		err = -ENODEV;
-		goto err_clk_disable;
+		goto err_phy_shutdown;
 	}
 
 	data = rcar_pci_read_reg(pcie, MACSR);
@@ -1175,7 +1175,7 @@ static int rcar_pcie_probe(struct platform_device *pdev)
 			dev_err(dev,
 				"failed to enable MSI support: %d\n",
 				err);
-			goto err_clk_disable;
+			goto err_phy_shutdown;
 		}
 	}
 
@@ -1189,6 +1189,12 @@ static int rcar_pcie_probe(struct platform_device *pdev)
 	if (IS_ENABLED(CONFIG_PCI_MSI))
 		rcar_pcie_teardown_msi(pcie);
 
+err_phy_shutdown:
+	if (pcie->phy) {
+		phy_power_off(pcie->phy);
+		phy_exit(pcie->phy);
+	}
+
 err_clk_disable:
 	clk_disable_unprepare(pcie->bus_clk);
 
-- 
2.16.2