* [PATCH v2] PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7
@ 2018-11-16 0:08 Trent Piepho
2018-11-20 15:41 ` Lorenzo Pieralisi
0 siblings, 1 reply; 2+ messages in thread
From: Trent Piepho @ 2018-11-16 0:08 UTC (permalink / raw)
To: linux-pci, linux-kernel
Cc: Bjorn Helgaas, Lorenzo Pieralisi, Trent Piepho, Andrey Smirnov
The IMX6 PCI-e host drier also supports the IMX7d. However, the
Kconfig dependencies of the driver prevented it from being enabled
unless the kernel was built with both IMX6 and IMX7 support. It works
fine to build with only IMX7 support enabled.
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
---
Changes from v1:
Ported to current kernel
drivers/pci/controller/dwc/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 91b0194240a5..6aafec3fad00 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -89,8 +89,8 @@ config PCI_EXYNOS
select PCIE_DW_HOST
config PCI_IMX6
- bool "Freescale i.MX6 PCIe controller"
- depends on SOC_IMX6Q || (ARM && COMPILE_TEST)
+ bool "Freescale i.MX6/7 PCIe controller"
+ depends on SOC_IMX6Q || SOC_IMX7D || (ARM && COMPILE_TEST)
depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW_HOST
--
2.14.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7
2018-11-16 0:08 [PATCH v2] PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7 Trent Piepho
@ 2018-11-20 15:41 ` Lorenzo Pieralisi
0 siblings, 0 replies; 2+ messages in thread
From: Lorenzo Pieralisi @ 2018-11-20 15:41 UTC (permalink / raw)
To: Trent Piepho; +Cc: linux-pci, linux-kernel, Bjorn Helgaas, Andrey Smirnov
On Fri, Nov 16, 2018 at 12:08:33AM +0000, Trent Piepho wrote:
> The IMX6 PCI-e host drier also supports the IMX7d. However, the
> Kconfig dependencies of the driver prevented it from being enabled
> unless the kernel was built with both IMX6 and IMX7 support. It works
> fine to build with only IMX7 support enabled.
>
> Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
> Signed-off-by: Trent Piepho <tpiepho@impinj.com>
> ---
> Changes from v1:
> Ported to current kernel
>
> drivers/pci/controller/dwc/Kconfig | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
Applied to pci/dwc for v4.21, thanks.
Lorenzo
> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> index 91b0194240a5..6aafec3fad00 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -89,8 +89,8 @@ config PCI_EXYNOS
> select PCIE_DW_HOST
>
> config PCI_IMX6
> - bool "Freescale i.MX6 PCIe controller"
> - depends on SOC_IMX6Q || (ARM && COMPILE_TEST)
> + bool "Freescale i.MX6/7 PCIe controller"
> + depends on SOC_IMX6Q || SOC_IMX7D || (ARM && COMPILE_TEST)
> depends on PCI_MSI_IRQ_DOMAIN
> select PCIE_DW_HOST
>
> --
> 2.14.4
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-11-20 15:41 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-16 0:08 [PATCH v2] PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7 Trent Piepho
2018-11-20 15:41 ` Lorenzo Pieralisi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).