Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
From: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
To: <linux-pci@vger.kernel.org>, <linuxppc-dev@lists.ozlabs.org>
Cc: Bjorn Helgaas <helgaas@kernel.org>, <linux@yadro.com>,
	Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
Subject: [PATCH RFC v4 01/21] PCI: Fix writing invalid BARs during pci_restore_state()
Date: Mon, 11 Mar 2019 16:31:02 +0300
Message-ID: <20190311133122.11417-2-s.miroshnichenko@yadro.com> (raw)
In-Reply-To: <20190311133122.11417-1-s.miroshnichenko@yadro.com>

If BAR movement has happened (due to PCIe hotplug) after pci_save_state(),
the saved addresses will become outdated. Restore them the most recently
calculated values, not the ones stored in an arbitrary moment.

Signed-off-by: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
---
 drivers/pci/pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 7c1b362f599a..f006068be209 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1376,7 +1376,7 @@ static void pci_restore_config_space(struct pci_dev *pdev)
 	if (pdev->hdr_type == PCI_HEADER_TYPE_NORMAL) {
 		pci_restore_config_space_range(pdev, 10, 15, 0, false);
 		/* Restore BARs before the command register. */
-		pci_restore_config_space_range(pdev, 4, 9, 10, false);
+		pci_restore_bars(pdev);
 		pci_restore_config_space_range(pdev, 0, 3, 0, false);
 	} else if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
 		pci_restore_config_space_range(pdev, 12, 15, 0, false);
-- 
2.20.1


  reply index

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-11 13:31 [PATCH RFC v4 00/21] PCI: Allow BAR movement during hotplug Sergey Miroshnichenko
2019-03-11 13:31 ` Sergey Miroshnichenko [this message]
2019-03-26 14:02   ` [PATCH RFC v4 01/21] PCI: Fix writing invalid BARs during pci_restore_state() Bjorn Helgaas
2019-03-11 13:31 ` [PATCH RFC v4 02/21] PCI: Fix race condition in pci_enable/disable_device() Sergey Miroshnichenko
2019-03-26 19:00   ` Bjorn Helgaas
2019-03-27 17:11     ` Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 03/21] PCI: Enable bridge's I/O and MEM access for hotplugged devices Sergey Miroshnichenko
2019-03-26 19:13   ` Bjorn Helgaas
2019-03-27 17:13     ` Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 04/21] PCI: Define PCI-specific version of the release_child_resources() Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 05/21] PCI: hotplug: Add a flag for the movable BARs feature Sergey Miroshnichenko
2019-03-26 19:24   ` Bjorn Helgaas
2019-03-27 17:16     ` Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 06/21] PCI: Pause the devices with movable BARs during rescan Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 07/21] PCI: Wake up bridges during rescan when movable BARs enabled Sergey Miroshnichenko
2019-03-26 19:28   ` Bjorn Helgaas
2019-03-11 13:31 ` [PATCH RFC v4 08/21] nvme-pci: Handle movable BARs Sergey Miroshnichenko
2019-03-26 20:20   ` Bjorn Helgaas
2019-03-27 17:30     ` Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 09/21] PCI: Mark immovable BARs with PCI_FIXED Sergey Miroshnichenko
2019-03-26 20:28   ` Bjorn Helgaas
2019-03-27 17:03     ` David Laight
2019-03-27 17:39       ` Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 10/21] PCI: Fix assigning of fixed prefetchable resources Sergey Miroshnichenko
2019-03-26 20:37   ` Bjorn Helgaas
2019-03-11 13:31 ` [PATCH RFC v4 11/21] PCI: Release and reassign the root bridge resources during rescan Sergey Miroshnichenko
2019-03-26 20:41   ` Bjorn Helgaas
2019-03-27 17:40     ` Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 12/21] PCI: Don't allow hotplugged devices to steal resources Sergey Miroshnichenko
2019-03-26 20:55   ` Bjorn Helgaas
2019-03-27 18:02     ` Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 13/21] PCI: Include fixed BARs into the bus size calculating Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 14/21] PCI: Don't reserve memory for hotplug when enabled movable BARs Sergey Miroshnichenko
2019-03-26 20:57   ` Bjorn Helgaas
2019-03-11 13:31 ` [PATCH RFC v4 15/21] PCI: Allow the failed resources to be reassigned later Sergey Miroshnichenko
2019-03-26 20:58   ` Bjorn Helgaas
2019-03-11 13:31 ` [PATCH RFC v4 16/21] PCI: Calculate fixed areas of bridge windows based on fixed BARs Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 17/21] PCI: Calculate boundaries for bridge windows Sergey Miroshnichenko
2019-03-26 21:01   ` Bjorn Helgaas
2019-03-11 13:31 ` [PATCH RFC v4 18/21] PCI: Make sure bridge windows include their fixed BARs Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 19/21] PCI: Prioritize fixed BAR assigning over the movable ones Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 20/21] PCI: pciehp: Add support for the movable BARs feature Sergey Miroshnichenko
2019-03-26 21:11   ` Bjorn Helgaas
2019-03-11 13:31 ` [PATCH RFC v4 21/21] powerpc/pci: Fix crash with enabled movable BARs Sergey Miroshnichenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190311133122.11417-2-s.miroshnichenko@yadro.com \
    --to=s.miroshnichenko@yadro.com \
    --cc=helgaas@kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux@yadro.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org
	public-inbox-index linux-pci

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git