Re: [PATCH v4 27/63] Documentation: PCI: convert PCIEBUS-HOWTO.txt to reST

[Mauro Carvalho Chehab <mchehab+samsung@kernel.org>]

Em Wed, 24 Apr 2019 00:28:56 +0800
Changbin Du <changbin.du@gmail.com> escreveu:

> This converts the plain text documentation to reStructuredText format and
> add it to Sphinx TOC tree. No essential content change.
> 
> Signed-off-by: Changbin Du <changbin.du@gmail.com>
> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
> ---
>  .../{PCIEBUS-HOWTO.txt => PCIEBUS-HOWTO.rst}  | 140 ++++++++++--------
>  Documentation/PCI/index.rst                   |   1 +
>  2 files changed, 82 insertions(+), 59 deletions(-)
>  rename Documentation/PCI/{PCIEBUS-HOWTO.txt => PCIEBUS-HOWTO.rst} (70%)

Names in lowercase after rename, please.

For the changes itself at the txt file:

Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

> 
> diff --git a/Documentation/PCI/PCIEBUS-HOWTO.txt b/Documentation/PCI/PCIEBUS-HOWTO.rst
> similarity index 70%
> rename from Documentation/PCI/PCIEBUS-HOWTO.txt
> rename to Documentation/PCI/PCIEBUS-HOWTO.rst
> index 15f0bb3b5045..f882ff62c51f 100644
> --- a/Documentation/PCI/PCIEBUS-HOWTO.txt
> +++ b/Documentation/PCI/PCIEBUS-HOWTO.rst
> @@ -1,16 +1,23 @@
> -		The PCI Express Port Bus Driver Guide HOWTO
> -	Tom L Nguyen tom.l.nguyen@intel.com
> -			11/03/2004
> +.. SPDX-License-Identifier: GPL-2.0
> +.. include:: <isonum.txt>
>  
> -1. About this guide
> +===========================================
> +The PCI Express Port Bus Driver Guide HOWTO
> +===========================================
> +
> +:Author: Tom L Nguyen tom.l.nguyen@intel.com 11/03/2004
> +:Copyright: |copy| 2004 Intel Corporation
> +
> +About this guide
> +================
>  
>  This guide describes the basics of the PCI Express Port Bus driver
>  and provides information on how to enable the service drivers to
>  register/unregister with the PCI Express Port Bus Driver.
>  
> -2. Copyright 2004 Intel Corporation
>  
> -3. What is the PCI Express Port Bus Driver
> +What is the PCI Express Port Bus Driver
> +=======================================
>  
>  A PCI Express Port is a logical PCI-PCI Bridge structure. There
>  are two types of PCI Express Port: the Root Port and the Switch
> @@ -30,7 +37,8 @@ support (AER), and virtual channel support (VC). These services may
>  be handled by a single complex driver or be individually distributed
>  and handled by corresponding service drivers.
>  
> -4. Why use the PCI Express Port Bus Driver?
> +Why use the PCI Express Port Bus Driver?
> +========================================
>  
>  In existing Linux kernels, the Linux Device Driver Model allows a
>  physical device to be handled by only a single driver. The PCI
> @@ -51,28 +59,31 @@ PCI Express Ports and distributes all provided service requests
>  to the corresponding service drivers as required. Some key
>  advantages of using the PCI Express Port Bus driver are listed below:
>  
> -	- Allow multiple service drivers to run simultaneously on
> -	  a PCI-PCI Bridge Port device.
> +  - Allow multiple service drivers to run simultaneously on
> +    a PCI-PCI Bridge Port device.
>  
> -	- Allow service drivers implemented in an independent
> -	  staged approach.
> +  - Allow service drivers implemented in an independent
> +    staged approach.
>  
> -	- Allow one service driver to run on multiple PCI-PCI Bridge
> -	  Port devices.
> +  - Allow one service driver to run on multiple PCI-PCI Bridge
> +    Port devices.
>  
> -	- Manage and distribute resources of a PCI-PCI Bridge Port
> -	  device to requested service drivers.
> +  - Manage and distribute resources of a PCI-PCI Bridge Port
> +    device to requested service drivers.
>  
> -5. Configuring the PCI Express Port Bus Driver vs. Service Drivers
> +Configuring the PCI Express Port Bus Driver vs. Service Drivers
> +===============================================================
>  
> -5.1 Including the PCI Express Port Bus Driver Support into the Kernel
> +Including the PCI Express Port Bus Driver Support into the Kernel
> +-----------------------------------------------------------------
>  
>  Including the PCI Express Port Bus driver depends on whether the PCI
>  Express support is included in the kernel config. The kernel will
>  automatically include the PCI Express Port Bus driver as a kernel
>  driver when the PCI Express support is enabled in the kernel.
>  
> -5.2 Enabling Service Driver Support
> +Enabling Service Driver Support
> +-------------------------------
>  
>  PCI device drivers are implemented based on Linux Device Driver Model.
>  All service drivers are PCI device drivers. As discussed above, it is
> @@ -89,9 +100,11 @@ header file /include/linux/pcieport_if.h, before calling these APIs.
>  Failure to do so will result an identity mismatch, which prevents
>  the PCI Express Port Bus driver from loading a service driver.
>  
> -5.2.1 pcie_port_service_register
> +pcie_port_service_register
> +~~~~~~~~~~~~~~~~~~~~~~~~~~
> +::
>  
> -int pcie_port_service_register(struct pcie_port_service_driver *new)
> +  int pcie_port_service_register(struct pcie_port_service_driver *new)
>  
>  This API replaces the Linux Driver Model's pci_register_driver API. A
>  service driver should always calls pcie_port_service_register at
> @@ -99,69 +112,76 @@ module init. Note that after service driver being loaded, calls
>  such as pci_enable_device(dev) and pci_set_master(dev) are no longer
>  necessary since these calls are executed by the PCI Port Bus driver.
>  
> -5.2.2 pcie_port_service_unregister
> +pcie_port_service_unregister
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +::
>  
> -void pcie_port_service_unregister(struct pcie_port_service_driver *new)
> +  void pcie_port_service_unregister(struct pcie_port_service_driver *new)
>  
>  pcie_port_service_unregister replaces the Linux Driver Model's
>  pci_unregister_driver. It's always called by service driver when a
>  module exits.
>  
> -5.2.3 Sample Code
> +Sample Code
> +~~~~~~~~~~~
>  
>  Below is sample service driver code to initialize the port service
>  driver data structure.
> +::
>  
> -static struct pcie_port_service_id service_id[] = { {
> -	.vendor = PCI_ANY_ID,
> -	.device = PCI_ANY_ID,
> -	.port_type = PCIE_RC_PORT,
> -	.service_type = PCIE_PORT_SERVICE_AER,
> -	}, { /* end: all zeroes */ }
> -};
> +  static struct pcie_port_service_id service_id[] = { {
> +    .vendor = PCI_ANY_ID,
> +    .device = PCI_ANY_ID,
> +    .port_type = PCIE_RC_PORT,
> +    .service_type = PCIE_PORT_SERVICE_AER,
> +    }, { /* end: all zeroes */ }
> +  };
>  
> -static struct pcie_port_service_driver root_aerdrv = {
> -	.name		= (char *)device_name,
> -	.id_table	= &service_id[0],
> +  static struct pcie_port_service_driver root_aerdrv = {
> +    .name		= (char *)device_name,
> +    .id_table	= &service_id[0],
>  
> -	.probe		= aerdrv_load,
> -	.remove		= aerdrv_unload,
> +    .probe		= aerdrv_load,
> +    .remove		= aerdrv_unload,
>  
> -	.suspend	= aerdrv_suspend,
> -	.resume		= aerdrv_resume,
> -};
> +    .suspend	= aerdrv_suspend,
> +    .resume		= aerdrv_resume,
> +  };
>  
>  Below is a sample code for registering/unregistering a service
>  driver.
> +::
>  
> -static int __init aerdrv_service_init(void)
> -{
> -	int retval = 0;
> +  static int __init aerdrv_service_init(void)
> +  {
> +    int retval = 0;
>  
> -	retval = pcie_port_service_register(&root_aerdrv);
> -	if (!retval) {
> -		/*
> -		 * FIX ME
> -		 */
> -	}
> -	return retval;
> -}
> +    retval = pcie_port_service_register(&root_aerdrv);
> +    if (!retval) {
> +      /*
> +      * FIX ME
> +      */
> +    }
> +    return retval;
> +  }
>  
> -static void __exit aerdrv_service_exit(void)
> -{
> -	pcie_port_service_unregister(&root_aerdrv);
> -}
> +  static void __exit aerdrv_service_exit(void)
> +  {
> +    pcie_port_service_unregister(&root_aerdrv);
> +  }
>  
> -module_init(aerdrv_service_init);
> -module_exit(aerdrv_service_exit);
> +  module_init(aerdrv_service_init);
> +  module_exit(aerdrv_service_exit);
>  
> -6. Possible Resource Conflicts
> +Possible Resource Conflicts
> +===========================
>  
>  Since all service drivers of a PCI-PCI Bridge Port device are
>  allowed to run simultaneously, below lists a few of possible resource
>  conflicts with proposed solutions.
>  
> -6.1 MSI and MSI-X Vector Resource
> +MSI and MSI-X Vector Resource
> +-----------------------------
>  
>  Once MSI or MSI-X interrupts are enabled on a device, it stays in this
>  mode until they are disabled again.  Since service drivers of the same
> @@ -179,7 +199,8 @@ driver. Service drivers should use (struct pcie_device*)dev->irq to
>  call request_irq/free_irq. In addition, the interrupt mode is stored
>  in the field interrupt_mode of struct pcie_device.
>  
> -6.3 PCI Memory/IO Mapped Regions
> +PCI Memory/IO Mapped Regions
> +----------------------------
>  
>  Service drivers for PCI Express Power Management (PME), Advanced
>  Error Reporting (AER), Hot-Plug (HP) and Virtual Channel (VC) access
> @@ -188,7 +209,8 @@ registers accessed are independent of each other. This patch assumes
>  that all service drivers will be well behaved and not overwrite
>  other service driver's configuration settings.
>  
> -6.4 PCI Config Registers
> +PCI Config Registers
> +--------------------
>  
>  Each service driver runs its PCI config operations on its own
>  capability structure except the PCI Express capability structure, in
> diff --git a/Documentation/PCI/index.rst b/Documentation/PCI/index.rst
> index 7babf43709b0..452723318405 100644
> --- a/Documentation/PCI/index.rst
> +++ b/Documentation/PCI/index.rst
> @@ -9,3 +9,4 @@ Linux PCI Bus Subsystem
>     :numbered:
>  
>     pci
> +   PCIEBUS-HOWTO



Thanks,
Mauro