From: "Z.q. Hou" <zhiqiang.hou@nxp.com>
To: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"bhelgaas@google.com" <bhelgaas@google.com>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"arnd@arndb.de" <arnd@arndb.de>,
"mark.rutland@arm.com" <mark.rutland@arm.com>,
"l.subrahmanya@mobiveil.co.in" <l.subrahmanya@mobiveil.co.in>,
"shawnguo@kernel.org" <shawnguo@kernel.org>,
"m.karthikeyan@mobiveil.co.in" <m.karthikeyan@mobiveil.co.in>,
Leo Li <leoyang.li@nxp.com>,
"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
"catalin.marinas@arm.com" <catalin.marinas@arm.com>,
"will.deacon@arm.com" <will.deacon@arm.com>
Cc: Mingkai Hu <mingkai.hu@nxp.com>,
"M.h. Lian" <minghuan.lian@nxp.com>,
Xiaowei Bao <xiaowei.bao@nxp.com>,
"Z.q. Hou" <zhiqiang.hou@nxp.com>
Subject: [PATCHv6 5/6] arm64: dts: lx2160a: Add PCIe controller DT nodes
Date: Tue, 28 May 2019 06:50:33 +0000 [thread overview]
Message-ID: <20190528065129.8769-6-Zhiqiang.Hou@nxp.com> (raw)
In-Reply-To: <20190528065129.8769-1-Zhiqiang.Hou@nxp.com>
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
The LX2160A integrated 6 PCIe Gen4 controllers.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
---
V6:
- No change.
.../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 163 ++++++++++++++++++
1 file changed, 163 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 125a8cc2c5b3..7a2b91ff1fbc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -964,5 +964,168 @@
};
};
};
+
+ pcie@3400000 {
+ compatible = "fsl,lx2160a-pcie";
+ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
+ 0x80 0x00000000 0x0 0x00001000>; /* configuration space */
+ reg-names = "csr_axi_slave", "config_axi_slave";
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupt-names = "aer", "pme", "intr";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ apio-wins = <8>;
+ ppio-wins = <8>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ pcie@3500000 {
+ compatible = "fsl,lx2160a-pcie";
+ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
+ 0x88 0x00000000 0x0 0x00001000>; /* configuration space */
+ reg-names = "csr_axi_slave", "config_axi_slave";
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupt-names = "aer", "pme", "intr";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ apio-wins = <8>;
+ ppio-wins = <8>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ pcie@3600000 {
+ compatible = "fsl,lx2160a-pcie";
+ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
+ 0x90 0x00000000 0x0 0x00001000>; /* configuration space */
+ reg-names = "csr_axi_slave", "config_axi_slave";
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupt-names = "aer", "pme", "intr";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ apio-wins = <256>;
+ ppio-wins = <24>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic 0 0 GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic 0 0 GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic 0 0 GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ pcie@3700000 {
+ compatible = "fsl,lx2160a-pcie";
+ reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
+ 0x98 0x00000000 0x0 0x00001000>; /* configuration space */
+ reg-names = "csr_axi_slave", "config_axi_slave";
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupt-names = "aer", "pme", "intr";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ apio-wins = <8>;
+ ppio-wins = <8>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic 0 0 GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic 0 0 GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic 0 0 GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ pcie@3800000 {
+ compatible = "fsl,lx2160a-pcie";
+ reg = <0x00 0x03800000 0x0 0x00100000 /* controller registers */
+ 0xa0 0x00000000 0x0 0x00001000>; /* configuration space */
+ reg-names = "csr_axi_slave", "config_axi_slave";
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupt-names = "aer", "pme", "intr";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ apio-wins = <256>;
+ ppio-wins = <24>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic 0 0 GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic 0 0 GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic 0 0 GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ pcie@3900000 {
+ compatible = "fsl,lx2160a-pcie";
+ reg = <0x00 0x03900000 0x0 0x00100000 /* controller registers */
+ 0xa8 0x00000000 0x0 0x00001000>; /* configuration space */
+ reg-names = "csr_axi_slave", "config_axi_slave";
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupt-names = "aer", "pme", "intr";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ apio-wins = <8>;
+ ppio-wins = <8>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic 0 0 GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic 0 0 GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic 0 0 GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
};
};
--
2.17.1
next prev parent reply other threads:[~2019-05-28 6:50 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-28 6:49 [PATCHv6 0/6] PCI: refactor Mobiveil driver and add PCIe Gen4 driver for NXP Layerscape SoCs Z.q. Hou
2019-05-28 6:50 ` [PATCHv6 1/6] PCI: mobiveil: Refactor Mobiveil PCIe Host Bridge IP driver Z.q. Hou
2019-05-28 6:50 ` [PATCHv6 2/6] PCI: mobiveil: Make mobiveil_host_init() can be used to re-init host Z.q. Hou
2019-05-28 6:50 ` [PATCHv6 3/6] dt-bindings: PCI: Add NXP Layerscape SoCs PCIe Gen4 controller Z.q. Hou
2019-05-28 6:50 ` [PATCHv6 4/6] PCI: mobiveil: Add PCIe Gen4 RC driver for NXP Layerscape SoCs Z.q. Hou
2019-05-28 6:50 ` Z.q. Hou [this message]
2019-06-03 5:12 ` [PATCHv6 5/6] arm64: dts: lx2160a: Add PCIe controller DT nodes Karthikeyan Mitran
2019-06-03 12:49 ` Z.q. Hou
2019-05-28 6:50 ` [PATCHv6 6/6] arm64: defconfig: Enable CONFIG_PCIE_LAYERSCAPE_GEN4 Z.q. Hou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190528065129.8769-6-Zhiqiang.Hou@nxp.com \
--to=zhiqiang.hou@nxp.com \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=l.subrahmanya@mobiveil.co.in \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=m.karthikeyan@mobiveil.co.in \
--cc=mark.rutland@arm.com \
--cc=minghuan.lian@nxp.com \
--cc=mingkai.hu@nxp.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=will.deacon@arm.com \
--cc=xiaowei.bao@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).