From: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
To: <linux-pci@vger.kernel.org>, <linuxppc-dev@lists.ozlabs.org>
Cc: Bjorn Helgaas <helgaas@kernel.org>, <linux@yadro.com>,
Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
Subject: [PATCH v6 06/30] PCI: hotplug: movable BARs: Recalculate all bridge windows during rescan
Date: Thu, 24 Oct 2019 20:12:04 +0300 [thread overview]
Message-ID: <20191024171228.877974-7-s.miroshnichenko@yadro.com> (raw)
In-Reply-To: <20191024171228.877974-1-s.miroshnichenko@yadro.com>
When the movable BARs feature is enabled and a rescan has been requested,
release all the bridge windows and recalculate them from scratch, taking
into account all kinds for BARs: fixed, immovable, movable, new.
This increases the chances to find a memory space to fit BARs for newly
hotplugged devices, especially if no/not enough gaps were reserved by the
BIOS/bootloader/firmware.
The last step of writing the recalculated windows to the bridges is done
by the new pci_setup_bridges() function.
Signed-off-by: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
---
drivers/pci/pci.h | 1 +
drivers/pci/probe.c | 22 ++++++++++++++++++++++
drivers/pci/setup-bus.c | 16 ++++++++++++++++
3 files changed, 39 insertions(+)
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 19bc50597d12..4a3f2b69285b 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -280,6 +280,7 @@ void __pci_bus_assign_resources(const struct pci_bus *bus,
struct list_head *realloc_head,
struct list_head *fail_head);
bool pci_bus_clip_resource(struct pci_dev *dev, int idx);
+void pci_bus_release_root_bridge_resources(struct pci_bus *bus);
void pci_reassigndev_resource_alignment(struct pci_dev *dev);
void pci_disable_bridge_window(struct pci_dev *dev);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 3d8c0f653378..d2dbec51c4df 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -3200,6 +3200,25 @@ static void pci_bus_rescan_done(struct pci_bus *bus)
pci_config_pm_runtime_put(bus->self);
}
+static void pci_setup_bridges(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ struct pci_bus *child;
+
+ if (!pci_dev_is_added(dev))
+ continue;
+
+ child = dev->subordinate;
+ if (child)
+ pci_setup_bridges(child);
+ }
+
+ if (bus->self)
+ pci_setup_bridge(bus);
+}
+
/**
* pci_rescan_bus - Scan a PCI bus for devices
* @bus: PCI bus to scan
@@ -3221,8 +3240,11 @@ unsigned int pci_rescan_bus(struct pci_bus *bus)
pci_bus_rescan_prepare(root);
max = pci_scan_child_bus(root);
+
+ pci_bus_release_root_bridge_resources(root);
pci_assign_unassigned_root_bus_resources(root);
+ pci_setup_bridges(root);
pci_bus_rescan_done(root);
} else {
max = pci_scan_child_bus(bus);
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index f2f02e6c9000..075e8185b936 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1635,6 +1635,22 @@ static void pci_bus_release_bridge_resources(struct pci_bus *bus,
pci_bridge_release_resources(bus, type);
}
+void pci_bus_release_root_bridge_resources(struct pci_bus *root_bus)
+{
+ int i;
+ struct resource *r;
+
+ pci_bus_release_bridge_resources(root_bus, IORESOURCE_IO, whole_subtree);
+ pci_bus_release_bridge_resources(root_bus, IORESOURCE_MEM, whole_subtree);
+ pci_bus_release_bridge_resources(root_bus,
+ IORESOURCE_MEM_64 | IORESOURCE_PREFETCH,
+ whole_subtree);
+
+ pci_bus_for_each_resource(root_bus, r, i) {
+ pci_release_child_resources(root_bus, r);
+ }
+}
+
static void pci_bus_dump_res(struct pci_bus *bus)
{
struct resource *res;
--
2.23.0
next prev parent reply other threads:[~2019-10-24 17:12 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-24 17:11 [PATCH v6 00/30] PCI: Allow BAR movement during hotplug Sergey Miroshnichenko
2019-10-24 17:11 ` [PATCH v6 01/30] PCI: Fix race condition in pci_enable/disable_device() Sergey Miroshnichenko
2019-10-25 14:33 ` Oxford Semiconductor Ltd OX16PCI954 - weird dmesg Carlo Pisani
2019-10-25 16:37 ` Bjorn Helgaas
2019-10-24 17:12 ` [PATCH v6 02/30] PCI: Enable bridge's I/O and MEM access for hotplugged devices Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 03/30] PCI: hotplug: Add a flag for the movable BARs feature Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 04/30] PCI: Define PCI-specific version of the release_child_resources() Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 05/30] PCI: hotplug: movable BARs: Fix reassigning the released bridge windows Sergey Miroshnichenko
2019-10-24 17:12 ` Sergey Miroshnichenko [this message]
2019-10-24 17:12 ` [PATCH v6 07/30] PCI: hotplug: movable BARs: Don't disable " Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 08/30] PCI: hotplug: movable BARs: Don't allow added devices to steal resources Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 09/30] PCI: Include fixed and immovable BARs into the bus size calculating Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 10/30] PCI: Prohibit assigning BARs and bridge windows to non-direct parents Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 11/30] PCI: hotplug: movable BARs: Try to assign unassigned resources only once Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 12/30] PCI: hotplug: movable BARs: Calculate immovable parts of bridge windows Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 13/30] PCI: hotplug: movable BARs: Compute limits for relocated " Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 14/30] PCI: Make sure bridge windows include their fixed BARs Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 15/30] PCI: Fix assigning the fixed prefetchable resources Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 16/30] PCI: hotplug: movable BARs: Assign fixed and immovable BARs before others Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 17/30] PCI: hotplug: movable BARs: Don't reserve IO/mem bus space Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 18/30] PCI: hotplug: Configure MPS for hot-added bridges during bus rescan Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 19/30] PCI: hotplug: movable BARs: Ignore the MEM BAR offsets from bootloader Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 20/30] powerpc/pci: Fix crash with enabled movable BARs Sergey Miroshnichenko
2019-10-25 1:22 ` Alexey Kardashevskiy
2019-10-24 17:12 ` [PATCH v6 21/30] powerpc/pci: Access PCI config space directly w/o pci_dn Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 22/30] powerpc/pci: Create pci_dn on demand Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 23/30] powerpc/pci: hotplug: Add support for movable BARs Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 24/30] powerpc/powernv/pci: Suppress an EEH error when reading an empty slot Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 25/30] PNP: Don't reserve BARs for PCI when enabled movable BARs Sergey Miroshnichenko
2019-10-27 17:40 ` kbuild test robot
2019-10-24 17:12 ` [PATCH v6 26/30] PCI: hotplug: movable BARs: Enable the feature by default Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 27/30] nvme-pci: Handle movable BARs Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 28/30] PCI/portdrv: Declare support of " Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 29/30] PCI: pciehp: movable BARs: Trigger a domain rescan on hp events Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 30/30] Revert "powerpc/powernv/pci: Work around races in PCI bridge enabling" Sergey Miroshnichenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191024171228.877974-7-s.miroshnichenko@yadro.com \
--to=s.miroshnichenko@yadro.com \
--cc=helgaas@kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@yadro.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).