[PATCH v2 00/14] Add PCIe support to TI's J721E SoC

[PATCH v2 00/14] Add PCIe support to TI's J721E SoC

[Kishon Vijay Abraham I]

TI's J721E SoC uses Cadence PCIe core to implement both RC mode
and EP mode.

The high level features are:
  *) Supports Legacy, MSI and MSI-X interrupt
  *) Supports upto GEN4 speed mode
  *) Supports SR-IOV
  *) Supports multiple physical function
  *) Ability to route all transactions via SMMU

This patch series
  *) Add support in Cadence PCIe core to be used for TI's J721E SoC
  *) Add a driver for J721E PCIe wrapper

v1 of the series can be found @ [1]

Changes from v1:
1) Added DT schemas cdns-pcie-host.yaml, cdns-pcie-ep.yaml and
   cdns-pcie.yaml for Cadence PCIe core and included it in
   TI's PCIe DT schema.
2) Added cpu_addr_fixup() for Cadence Platform driver.
3) Fixed subject/description/renamed functions as commented by
   Andrew Murray.

[1] -> http://lore.kernel.org/r/20191209092147.22901-1-kishon@ti.com

Kishon Vijay Abraham I (14):
  dt-bindings: PCI: cadence: Add PCIe RC/EP DT schema for Cadence PCIe
  PCI: cadence: Fix cdns_pcie_{host|ep}_setup() error path
  linux/kernel.h: Add PTR_ALIGN_DOWN macro
  PCI: cadence: Add support to use custom read and write accessors
  PCI: cadence: Add support to start link and verify link status
  PCI: cadence: Add read/write accessors to perform only 32-bit accesses
  PCI: cadence: Allow pci_host_bridge to have custom pci_ops
  PCI: cadence: Add new *ops* for CPU addr fixup
  PCI: cadence: Fix updating Vendor ID and Subsystem Vendor ID register
  dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC
  dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC
  PCI: j721e: Add TI J721E PCIe driver
  misc: pci_endpoint_test: Add J721E in pci_device_id table
  MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe

 .../devicetree/bindings/pci/cdns-pcie-ep.yaml |  20 +
 .../bindings/pci/cdns-pcie-host.yaml          |  30 ++
 .../devicetree/bindings/pci/cdns-pcie.yaml    |  32 ++
 .../bindings/pci/ti,j721e-pci-ep.yaml         |  93 ++++
 .../bindings/pci/ti,j721e-pci-host.yaml       | 119 +++++
 MAINTAINERS                                   |   4 +-
 drivers/misc/pci_endpoint_test.c              |   9 +
 drivers/pci/controller/cadence/Kconfig        |  23 +
 drivers/pci/controller/cadence/Makefile       |   1 +
 drivers/pci/controller/cadence/pci-j721e.c    | 438 ++++++++++++++++++
 .../pci/controller/cadence/pcie-cadence-ep.c  |  17 +-
 .../controller/cadence/pcie-cadence-host.c    |  59 ++-
 .../controller/cadence/pcie-cadence-plat.c    |  13 +
 drivers/pci/controller/cadence/pcie-cadence.c |  48 +-
 drivers/pci/controller/cadence/pcie-cadence.h | 148 +++++-
 include/linux/kernel.h                        |   1 +
 16 files changed, 1014 insertions(+), 41 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
 create mode 100644 Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
 create mode 100644 Documentation/devicetree/bindings/pci/cdns-pcie.yaml
 create mode 100644 Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
 create mode 100644 Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
 create mode 100644 drivers/pci/controller/cadence/pci-j721e.c

-- 
2.17.1

[PATCH v2 01/14] dt-bindings: PCI: cadence: Add PCIe RC/EP DT schema for Cadence PCIe

[Kishon Vijay Abraham I]

Add PCIe Host (RC) and Endpoint (EP) device tree schema for Cadence
PCIe core library. Platforms using Cadence PCIe core can include the
schemas added here in the platform specific schemas.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../devicetree/bindings/pci/cdns-pcie-ep.yaml | 20 ++++++++++++
 .../bindings/pci/cdns-pcie-host.yaml          | 30 +++++++++++++++++
 .../devicetree/bindings/pci/cdns-pcie.yaml    | 32 +++++++++++++++++++
 3 files changed, 82 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
 create mode 100644 Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
 create mode 100644 Documentation/devicetree/bindings/pci/cdns-pcie.yaml

diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
new file mode 100644
index 000000000000..36aaae5931c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+--
+$id: "http://devicetree.org/schemas/pci/cdns-pcie-ep.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence PCIe Endpoint
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+  - $ref: "cdns-pcie.yaml#"
+
+properties:
+  max-functions:
+    description: Maximum number of functions that can be configured (default 1)
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint8
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
new file mode 100644
index 000000000000..78261bc4f0c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/cdns-pcie-host.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence PCIe Host
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+  - $ref: "/schemas/pci/pci-bus.yaml#"
+  - $ref: "cdns-pcie.yaml#"
+
+properties:
+  vendor-id:
+    description: The PCI vendor ID (16 bits, default is design dependent)
+
+  device-id:
+    description: The PCI device ID (16 bits, default is design dependent)
+
+  cdns,no-bar-match-nbits:
+    description: Set into the no BAR match register to configure the number
+      of least significant bits kept during inbound (PCIe -> AXI) address
+      translations (default 32)
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
new file mode 100644
index 000000000000..497d3dc2e6f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/cdns-pcie.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence PCIe Core
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+properties:
+  max-link-speed:
+    minimum: 1
+    maximum: 3
+
+  num-lanes:
+    minimum: 1
+    maximum: 2
+
+  cdns,max-outbound-regions:
+    description: Set to maximum number of outbound regions.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+
+  phys:
+    description: List of Generic PHY phandles. One per lane if more than one in
+      the list. If only one PHY listed it must manage all lanes.
+
+  phy-names:
+    description: List of names to identify the PHY.
-- 
2.17.1

[PATCH v2 02/14] PCI: cadence: Fix cdns_pcie_{host|ep}_setup() error path

[Kishon Vijay Abraham I]

commit bd22885aa188f135fd9 ("PCI: cadence: Refactor driver to use
as a core library") while refactoring the Cadence PCIe driver to be
used as library, removed pm_runtime_get_sync() from cdns_pcie_ep_setup()
and cdns_pcie_host_setup() but missed to remove the corresponding
pm_runtime_put_sync() in the error path. Fix it here.

Fixes: bd22885aa188 ("PCI: cadence: Refactor driver to use as a core library")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/cadence/pcie-cadence-ep.c   | 9 ++-------
 drivers/pci/controller/cadence/pcie-cadence-host.c | 6 +-----
 2 files changed, 3 insertions(+), 12 deletions(-)

diff --git a/drivers/pci/controller/cadence/pcie-cadence-ep.c b/drivers/pci/controller/cadence/pcie-cadence-ep.c
index f90d849172cc..d5be81075cc3 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-ep.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-ep.c
@@ -8,7 +8,6 @@
 #include <linux/of.h>
 #include <linux/pci-epc.h>
 #include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
 #include <linux/sizes.h>
 
 #include "pcie-cadence.h"
@@ -545,8 +544,7 @@ int cdns_pcie_ep_setup(struct cdns_pcie_ep *ep)
 	epc = devm_pci_epc_create(dev, &cdns_pcie_epc_ops);
 	if (IS_ERR(epc)) {
 		dev_err(dev, "failed to create epc device\n");
-		ret = PTR_ERR(epc);
-		goto err_init;
+		return PTR_ERR(epc);
 	}
 
 	epc_set_drvdata(epc, ep);
@@ -563,7 +561,7 @@ int cdns_pcie_ep_setup(struct cdns_pcie_ep *ep)
 			       resource_size(pcie->mem_res));
 	if (ret < 0) {
 		dev_err(dev, "failed to initialize the memory space\n");
-		goto err_init;
+		return ret;
 	}
 
 	ep->irq_cpu_addr = pci_epc_mem_alloc_addr(epc, &ep->irq_phys_addr,
@@ -582,8 +580,5 @@ int cdns_pcie_ep_setup(struct cdns_pcie_ep *ep)
  free_epc_mem:
 	pci_epc_mem_exit(epc);
 
- err_init:
-	pm_runtime_put_sync(dev);
-
 	return ret;
 }
diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
index 9b1c3966414b..11eb81da0233 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
@@ -7,7 +7,6 @@
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
 #include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
 
 #include "pcie-cadence.h"
 
@@ -256,7 +255,7 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 
 	ret = cdns_pcie_host_init(dev, &resources, rc);
 	if (ret)
-		goto err_init;
+		return ret;
 
 	list_splice_init(&resources, &bridge->windows);
 	bridge->dev.parent = dev;
@@ -274,8 +273,5 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
  err_host_probe:
 	pci_free_resource_list(&resources);
 
- err_init:
-	pm_runtime_put_sync(dev);
-
 	return ret;
 }
-- 
2.17.1

[PATCH v2 03/14] linux/kernel.h: Add PTR_ALIGN_DOWN macro

[Kishon Vijay Abraham I]

Add a macro for aligning down a pointer. This is useful to get an
aligned register address when a device allows only word access and
doesn't allow half word or byte access.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 include/linux/kernel.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 3adcb39fa6f5..888ad70a80aa 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -34,6 +34,7 @@
 #define ALIGN_DOWN(x, a)	__ALIGN_KERNEL((x) - ((a) - 1), (a))
 #define __ALIGN_MASK(x, mask)	__ALIGN_KERNEL_MASK((x), (mask))
 #define PTR_ALIGN(p, a)		((typeof(p))ALIGN((unsigned long)(p), (a)))
+#define PTR_ALIGN_DOWN(p, a)	((typeof(p))ALIGN_DOWN((unsigned long)(p), (a)))
 #define IS_ALIGNED(x, a)		(((x) & ((typeof(x))(a) - 1)) == 0)
 
 /* generic data direction definitions */
-- 
2.17.1

[PATCH v2 04/14] PCI: cadence: Add support to use custom read and write accessors

[Kishon Vijay Abraham I]

Add support to use custom read and write accessors. Platforms that
don't support half word or byte access or any other constraint
while accessing registers can use this feature to populate custom
read and write accessors. These custom accessors are used for both
standard register access and configuration space register access of
the PCIe host bridge.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/cadence/pcie-cadence.h | 107 +++++++++++++++---
 1 file changed, 94 insertions(+), 13 deletions(-)

diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index 4f6bec506841..391636a9c084 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -224,6 +224,11 @@ enum cdns_pcie_msg_routing {
 	MSG_ROUTING_GATHER,
 };
 
+struct cdns_pcie_ops {
+	u32	(*read)(void __iomem *addr, int size);
+	void	(*write)(void __iomem *addr, int size, u32 value);
+};
+
 /**
  * struct cdns_pcie - private data for Cadence PCIe controller drivers
  * @reg_base: IO mapped register base
@@ -240,7 +245,7 @@ struct cdns_pcie {
 	int			phy_count;
 	struct phy		**phy;
 	struct device_link	**link;
-	const struct cdns_pcie_common_ops *ops;
+	const struct cdns_pcie_ops *ops;
 };
 
 /**
@@ -311,69 +316,145 @@ struct cdns_pcie_ep {
 /* Register access */
 static inline void cdns_pcie_writeb(struct cdns_pcie *pcie, u32 reg, u8 value)
 {
-	writeb(value, pcie->reg_base + reg);
+	void __iomem *addr = pcie->reg_base + reg;
+
+	if (pcie->ops && pcie->ops->write) {
+		pcie->ops->write(addr, 0x1, value);
+		return;
+	}
+
+	writeb(value, addr);
 }
 
 static inline void cdns_pcie_writew(struct cdns_pcie *pcie, u32 reg, u16 value)
 {
-	writew(value, pcie->reg_base + reg);
+	void __iomem *addr = pcie->reg_base + reg;
+
+	if (pcie->ops && pcie->ops->write) {
+		pcie->ops->write(addr, 0x2, value);
+		return;
+	}
+
+	writew(value, addr);
 }
 
 static inline void cdns_pcie_writel(struct cdns_pcie *pcie, u32 reg, u32 value)
 {
-	writel(value, pcie->reg_base + reg);
+	void __iomem *addr = pcie->reg_base + reg;
+
+	if (pcie->ops && pcie->ops->write) {
+		pcie->ops->write(addr, 0x4, value);
+		return;
+	}
+
+	writel(value, addr);
 }
 
 static inline u32 cdns_pcie_readl(struct cdns_pcie *pcie, u32 reg)
 {
-	return readl(pcie->reg_base + reg);
+	void __iomem *addr = pcie->reg_base + reg;
+
+	if (pcie->ops && pcie->ops->read)
+		return pcie->ops->read(addr, 0x4);
+
+	return readl(addr);
 }
 
 /* Root Port register access */
 static inline void cdns_pcie_rp_writeb(struct cdns_pcie *pcie,
 				       u32 reg, u8 value)
 {
-	writeb(value, pcie->reg_base + CDNS_PCIE_RP_BASE + reg);
+	void __iomem *addr = pcie->reg_base + CDNS_PCIE_RP_BASE + reg;
+
+	if (pcie->ops && pcie->ops->write) {
+		pcie->ops->write(addr, 0x1, value);
+		return;
+	}
+
+	writeb(value, addr);
 }
 
 static inline void cdns_pcie_rp_writew(struct cdns_pcie *pcie,
 				       u32 reg, u16 value)
 {
-	writew(value, pcie->reg_base + CDNS_PCIE_RP_BASE + reg);
+	void __iomem *addr = pcie->reg_base + CDNS_PCIE_RP_BASE + reg;
+
+	if (pcie->ops && pcie->ops->write) {
+		pcie->ops->write(addr, 0x2, value);
+		return;
+	}
+
+	writew(value, addr);
 }
 
 /* Endpoint Function register access */
 static inline void cdns_pcie_ep_fn_writeb(struct cdns_pcie *pcie, u8 fn,
 					  u32 reg, u8 value)
 {
-	writeb(value, pcie->reg_base + CDNS_PCIE_EP_FUNC_BASE(fn) + reg);
+	void __iomem *addr = pcie->reg_base + CDNS_PCIE_EP_FUNC_BASE(fn) + reg;
+
+	if (pcie->ops && pcie->ops->write) {
+		pcie->ops->write(addr, 0x1, value);
+		return;
+	}
+
+	writeb(value, addr);
 }
 
 static inline void cdns_pcie_ep_fn_writew(struct cdns_pcie *pcie, u8 fn,
 					  u32 reg, u16 value)
 {
-	writew(value, pcie->reg_base + CDNS_PCIE_EP_FUNC_BASE(fn) + reg);
+	void __iomem *addr = pcie->reg_base + CDNS_PCIE_EP_FUNC_BASE(fn) + reg;
+
+	if (pcie->ops && pcie->ops->write) {
+		pcie->ops->write(addr, 0x2, value);
+		return;
+	}
+
+	writew(value, addr);
 }
 
 static inline void cdns_pcie_ep_fn_writel(struct cdns_pcie *pcie, u8 fn,
 					  u32 reg, u32 value)
 {
-	writel(value, pcie->reg_base + CDNS_PCIE_EP_FUNC_BASE(fn) + reg);
+	void __iomem *addr = pcie->reg_base + CDNS_PCIE_EP_FUNC_BASE(fn) + reg;
+
+	if (pcie->ops && pcie->ops->write) {
+		pcie->ops->write(addr, 0x4, value);
+		return;
+	}
+
+	writel(value, addr);
 }
 
 static inline u8 cdns_pcie_ep_fn_readb(struct cdns_pcie *pcie, u8 fn, u32 reg)
 {
-	return readb(pcie->reg_base + CDNS_PCIE_EP_FUNC_BASE(fn) + reg);
+	void __iomem *addr = pcie->reg_base + CDNS_PCIE_EP_FUNC_BASE(fn) + reg;
+
+	if (pcie->ops && pcie->ops->read)
+		return pcie->ops->read(addr, 0x1);
+
+	return readb(addr);
 }
 
 static inline u16 cdns_pcie_ep_fn_readw(struct cdns_pcie *pcie, u8 fn, u32 reg)
 {
-	return readw(pcie->reg_base + CDNS_PCIE_EP_FUNC_BASE(fn) + reg);
+	void __iomem *addr = pcie->reg_base + CDNS_PCIE_EP_FUNC_BASE(fn) + reg;
+
+	if (pcie->ops && pcie->ops->read)
+		return pcie->ops->read(addr, 0x2);
+
+	return readw(addr);
 }
 
 static inline u32 cdns_pcie_ep_fn_readl(struct cdns_pcie *pcie, u8 fn, u32 reg)
 {
-	return readl(pcie->reg_base + CDNS_PCIE_EP_FUNC_BASE(fn) + reg);
+	void __iomem *addr = pcie->reg_base + CDNS_PCIE_EP_FUNC_BASE(fn) + reg;
+
+	if (pcie->ops && pcie->ops->read)
+		return pcie->ops->read(addr, 0x4);
+
+	return readl(addr);
 }
 
 #ifdef CONFIG_PCIE_CADENCE_HOST
-- 
2.17.1

[PATCH v2 05/14] PCI: cadence: Add support to start link and verify link status

[Kishon Vijay Abraham I]

Add cdns_pcie_ops to start link and verify link status. The registers
to start link and to check link status is in Platform specific PCIe
wrapper. Add support for platform specific drivers to add callback
functions for the PCIe Cadence core to start link and verify link status.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../pci/controller/cadence/pcie-cadence-ep.c  |  8 +++++
 .../controller/cadence/pcie-cadence-host.c    | 28 +++++++++++++++++
 drivers/pci/controller/cadence/pcie-cadence.h | 30 +++++++++++++++++++
 3 files changed, 66 insertions(+)

diff --git a/drivers/pci/controller/cadence/pcie-cadence-ep.c b/drivers/pci/controller/cadence/pcie-cadence-ep.c
index d5be81075cc3..26cb492fdb81 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-ep.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-ep.c
@@ -457,8 +457,10 @@ static int cdns_pcie_ep_start(struct pci_epc *epc)
 {
 	struct cdns_pcie_ep *ep = epc_get_drvdata(epc);
 	struct cdns_pcie *pcie = &ep->pcie;
+	struct device *dev = pcie->dev;
 	struct pci_epf *epf;
 	u32 cfg;
+	int ret;
 
 	/*
 	 * BIT(0) is hardwired to 1, hence function 0 is always enabled
@@ -469,6 +471,12 @@ static int cdns_pcie_ep_start(struct pci_epc *epc)
 		cfg |= BIT(epf->func_no);
 	cdns_pcie_writel(pcie, CDNS_PCIE_LM_EP_FUNC_CFG, cfg);
 
+	ret = cdns_pcie_start_link(pcie);
+	if (ret) {
+		dev_err(dev, "Failed to start link\n");
+		return ret;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
index 11eb81da0233..d6a38b74371c 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
@@ -3,6 +3,7 @@
 // Cadence PCIe host controller driver.
 // Author: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
 
+#include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
@@ -200,6 +201,23 @@ static int cdns_pcie_host_init(struct device *dev,
 	return err;
 }
 
+static int cdns_pcie_host_wait_for_link(struct cdns_pcie *pcie)
+{
+	struct device *dev = pcie->dev;
+	int retries;
+
+	/* Check if the link is up or not */
+	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+		if (cdns_pcie_link_up(pcie)) {
+			dev_info(dev, "Link up\n");
+			return 0;
+		}
+		usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
+	}
+
+	return -ETIMEDOUT;
+}
+
 int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 {
 	struct device *dev = rc->pcie.dev;
@@ -253,6 +271,16 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 
 	pcie->mem_res = res;
 
+	ret = cdns_pcie_start_link(pcie);
+	if (ret) {
+		dev_err(dev, "Failed to start link\n");
+		return ret;
+	}
+
+	ret = cdns_pcie_host_wait_for_link(pcie);
+	if (ret)
+		dev_dbg(dev, "PCIe link never came up\n");
+
 	ret = cdns_pcie_host_init(dev, &resources, rc);
 	if (ret)
 		return ret;
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index 391636a9c084..676a57b7ad3d 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -10,6 +10,11 @@
 #include <linux/pci.h>
 #include <linux/phy/phy.h>
 
+/* Parameters for the waiting for link up routine */
+#define LINK_WAIT_MAX_RETRIES	10
+#define LINK_WAIT_USLEEP_MIN	90000
+#define LINK_WAIT_USLEEP_MAX	100000
+
 /*
  * Local Management Registers
  */
@@ -227,6 +232,9 @@ enum cdns_pcie_msg_routing {
 struct cdns_pcie_ops {
 	u32	(*read)(void __iomem *addr, int size);
 	void	(*write)(void __iomem *addr, int size, u32 value);
+	int	(*start_link)(struct cdns_pcie *pcie);
+	void	(*stop_link)(struct cdns_pcie *pcie);
+	bool	(*link_up)(struct cdns_pcie *pcie);
 };
 
 /**
@@ -457,6 +465,28 @@ static inline u32 cdns_pcie_ep_fn_readl(struct cdns_pcie *pcie, u8 fn, u32 reg)
 	return readl(addr);
 }
 
+static inline int cdns_pcie_start_link(struct cdns_pcie *pcie)
+{
+	if (pcie->ops->start_link)
+		return pcie->ops->start_link(pcie);
+
+	return 0;
+}
+
+static inline void cdns_pcie_stop_link(struct cdns_pcie *pcie)
+{
+	if (pcie->ops->stop_link)
+		pcie->ops->stop_link(pcie);
+}
+
+static inline bool cdns_pcie_link_up(struct cdns_pcie *pcie)
+{
+	if (pcie->ops->link_up)
+		return pcie->ops->link_up(pcie);
+
+	return true;
+}
+
 #ifdef CONFIG_PCIE_CADENCE_HOST
 int cdns_pcie_host_setup(struct cdns_pcie_rc *rc);
 #else
-- 
2.17.1

[PATCH v2 06/14] PCI: cadence: Add read/write accessors to perform only 32-bit accesses

[Kishon Vijay Abraham I]

Certain platforms like TI's J721E allow only 32-bit register accesses.
Add read and write accessors to perform only 32-bit accesses in order to
support platforms like TI's J721E.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/cadence/pcie-cadence.c | 40 +++++++++++++++++++
 drivers/pci/controller/cadence/pcie-cadence.h |  2 +
 2 files changed, 42 insertions(+)

diff --git a/drivers/pci/controller/cadence/pcie-cadence.c b/drivers/pci/controller/cadence/pcie-cadence.c
index cd795f6fc1e2..874b7fa93577 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.c
+++ b/drivers/pci/controller/cadence/pcie-cadence.c
@@ -7,6 +7,46 @@
 
 #include "pcie-cadence.h"
 
+u32 cdns_platform_pcie_read32(void __iomem *addr, int size)
+{
+	void __iomem *aligned_addr = PTR_ALIGN_DOWN(addr, 0x4);
+	unsigned int offset = (unsigned long)addr & 0x3;
+	u32 val = readl(aligned_addr);
+
+	if (!IS_ALIGNED((uintptr_t)addr, size)) {
+		WARN(1, "Address %p and size %d are not aligned\n", addr, size);
+		return 0;
+	}
+
+	if (size > 2)
+		return val;
+
+	return (val >> (8 * offset)) & ((1 << (size * 8)) - 1);
+}
+
+void cdns_platform_pcie_write32(void __iomem *addr, int size, u32 value)
+{
+	void __iomem *aligned_addr = PTR_ALIGN_DOWN(addr, 0x4);
+	unsigned int offset = (unsigned long)addr & 0x3;
+	u32 mask;
+	u32 val;
+
+	if (!IS_ALIGNED((uintptr_t)addr, size)) {
+		WARN(1, "Address %p and size %d are not aligned\n", addr, size);
+		return;
+	}
+
+	if (size > 2) {
+		writel(value, addr);
+		return;
+	}
+
+	mask = ~(((1 << (size * 8)) - 1) << (offset * 8));
+	val = readl(aligned_addr) & mask;
+	val |= value << (offset * 8);
+	writel(val, aligned_addr);
+}
+
 void cdns_pcie_set_outbound_region(struct cdns_pcie *pcie, u8 fn,
 				   u32 r, bool is_io,
 				   u64 cpu_addr, u64 pci_addr, size_t size)
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index 676a57b7ad3d..31d031b07661 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -515,6 +515,8 @@ void cdns_pcie_reset_outbound_region(struct cdns_pcie *pcie, u32 r);
 void cdns_pcie_disable_phy(struct cdns_pcie *pcie);
 int cdns_pcie_enable_phy(struct cdns_pcie *pcie);
 int cdns_pcie_init_phy(struct device *dev, struct cdns_pcie *pcie);
+u32 cdns_platform_pcie_read32(void __iomem *addr, int size);
+void cdns_platform_pcie_write32(void __iomem *addr, int size, u32 value);
 extern const struct dev_pm_ops cdns_pcie_pm_ops;
 
 #endif /* _PCIE_CADENCE_H */
-- 
2.17.1

[PATCH v2 07/14] PCI: cadence: Allow pci_host_bridge to have custom pci_ops

[Kishon Vijay Abraham I]

Certain platforms like TI's J721E allows only 32-bit configuration
space access. In such cases pci_generic_config_read and
pci_generic_config_write cannot be used. Add support in Cadence core
to let pci_host_bridge have custom pci_ops.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/cadence/pcie-cadence-host.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
index d6a38b74371c..29d3afd8cf06 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
@@ -288,7 +288,8 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 	list_splice_init(&resources, &bridge->windows);
 	bridge->dev.parent = dev;
 	bridge->busnr = pcie->bus;
-	bridge->ops = &cdns_pcie_host_ops;
+	if (!bridge->ops)
+		bridge->ops = &cdns_pcie_host_ops;
 	bridge->map_irq = of_irq_parse_and_map_pci;
 	bridge->swizzle_irq = pci_common_swizzle;
 
-- 
2.17.1

[PATCH v2 08/14] PCI: cadence: Add new *ops* for CPU addr fixup

[Kishon Vijay Abraham I]

Cadence driver uses "mem" memory resource to obtain the offset of
configuration space address region, memory space address region and
message space address region. The obtained offset is used to program
the Address Translation Unit (ATU). However certain platforms like TI's
J721E SoC require the absolute address to be programmed in the ATU and not
just the offset.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../pci/controller/cadence/pcie-cadence-host.c    | 15 ++++-----------
 .../pci/controller/cadence/pcie-cadence-plat.c    | 13 +++++++++++++
 drivers/pci/controller/cadence/pcie-cadence.c     |  8 ++++++--
 drivers/pci/controller/cadence/pcie-cadence.h     |  1 +
 4 files changed, 24 insertions(+), 13 deletions(-)

diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
index 29d3afd8cf06..0ec21486ae17 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
@@ -104,15 +104,14 @@ static int cdns_pcie_host_init_root_port(struct cdns_pcie_rc *rc)
 static int cdns_pcie_host_init_address_translation(struct cdns_pcie_rc *rc)
 {
 	struct cdns_pcie *pcie = &rc->pcie;
-	struct resource *mem_res = pcie->mem_res;
 	struct resource *bus_range = rc->bus_range;
 	struct resource *cfg_res = rc->cfg_res;
 	struct device *dev = pcie->dev;
 	struct device_node *np = dev->of_node;
 	struct of_pci_range_parser parser;
+	u64 cpu_addr = cfg_res->start;
 	struct of_pci_range range;
 	u32 addr0, addr1, desc1;
-	u64 cpu_addr;
 	int r, err;
 
 	/*
@@ -125,7 +124,9 @@ static int cdns_pcie_host_init_address_translation(struct cdns_pcie_rc *rc)
 	cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_PCI_ADDR1(0), addr1);
 	cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_DESC1(0), desc1);
 
-	cpu_addr = cfg_res->start - mem_res->start;
+	if (pcie->ops->cpu_addr_fixup)
+		cpu_addr = pcie->ops->cpu_addr_fixup(pcie, cpu_addr);
+
 	addr0 = CDNS_PCIE_AT_OB_REGION_CPU_ADDR0_NBITS(12) |
 		(lower_32_bits(cpu_addr) & GENMASK(31, 8));
 	addr1 = upper_32_bits(cpu_addr);
@@ -263,14 +264,6 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 	}
 	rc->cfg_res = res;
 
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem");
-	if (!res) {
-		dev_err(dev, "missing \"mem\"\n");
-		return -EINVAL;
-	}
-
-	pcie->mem_res = res;
-
 	ret = cdns_pcie_start_link(pcie);
 	if (ret) {
 		dev_err(dev, "Failed to start link\n");
diff --git a/drivers/pci/controller/cadence/pcie-cadence-plat.c b/drivers/pci/controller/cadence/pcie-cadence-plat.c
index f5c6bf6dfcb8..6f5f07b3eed1 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-plat.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-plat.c
@@ -13,6 +13,8 @@
 #include <linux/of_device.h>
 #include "pcie-cadence.h"
 
+#define CDNS_PLAT_CPU_TO_BUS_ADDR	0x0FFFFFFF
+
 /**
  * struct cdns_plat_pcie - private data for this PCIe platform driver
  * @pcie: Cadence PCIe controller
@@ -30,6 +32,15 @@ struct cdns_plat_pcie_of_data {
 
 static const struct of_device_id cdns_plat_pcie_of_match[];
 
+static u64 cdns_plat_cpu_addr_fixup(struct cdns_pcie *pcie, u64 cpu_addr)
+{
+	return cpu_addr & CDNS_PLAT_CPU_TO_BUS_ADDR;
+}
+
+static const struct cdns_pcie_ops cdns_plat_ops = {
+	.cpu_addr_fixup = cdns_plat_cpu_addr_fixup,
+};
+
 static int cdns_plat_pcie_probe(struct platform_device *pdev)
 {
 	const struct cdns_plat_pcie_of_data *data;
@@ -66,6 +77,7 @@ static int cdns_plat_pcie_probe(struct platform_device *pdev)
 
 		rc = pci_host_bridge_priv(bridge);
 		rc->pcie.dev = dev;
+		rc->pcie.ops = &cdns_plat_ops;
 		cdns_plat_pcie->pcie = &rc->pcie;
 		cdns_plat_pcie->is_rc = is_rc;
 
@@ -93,6 +105,7 @@ static int cdns_plat_pcie_probe(struct platform_device *pdev)
 			return -ENOMEM;
 
 		ep->pcie.dev = dev;
+		ep->pcie.ops = &cdns_plat_ops;
 		cdns_plat_pcie->pcie = &ep->pcie;
 		cdns_plat_pcie->is_rc = is_rc;
 
diff --git a/drivers/pci/controller/cadence/pcie-cadence.c b/drivers/pci/controller/cadence/pcie-cadence.c
index 874b7fa93577..29d32019145c 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.c
+++ b/drivers/pci/controller/cadence/pcie-cadence.c
@@ -113,7 +113,9 @@ void cdns_pcie_set_outbound_region(struct cdns_pcie *pcie, u8 fn,
 	cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_DESC1(r), desc1);
 
 	/* Set the CPU address */
-	cpu_addr -= pcie->mem_res->start;
+	if (pcie->ops->cpu_addr_fixup)
+		cpu_addr = pcie->ops->cpu_addr_fixup(pcie, cpu_addr);
+
 	addr0 = CDNS_PCIE_AT_OB_REGION_CPU_ADDR0_NBITS(nbits) |
 		(lower_32_bits(cpu_addr) & GENMASK(31, 8));
 	addr1 = upper_32_bits(cpu_addr);
@@ -140,7 +142,9 @@ void cdns_pcie_set_outbound_region_for_normal_msg(struct cdns_pcie *pcie, u8 fn,
 	}
 
 	/* Set the CPU address */
-	cpu_addr -= pcie->mem_res->start;
+	if (pcie->ops->cpu_addr_fixup)
+		cpu_addr = pcie->ops->cpu_addr_fixup(pcie, cpu_addr);
+
 	addr0 = CDNS_PCIE_AT_OB_REGION_CPU_ADDR0_NBITS(17) |
 		(lower_32_bits(cpu_addr) & GENMASK(31, 8));
 	addr1 = upper_32_bits(cpu_addr);
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index 31d031b07661..942e4a3cf455 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -235,6 +235,7 @@ struct cdns_pcie_ops {
 	int	(*start_link)(struct cdns_pcie *pcie);
 	void	(*stop_link)(struct cdns_pcie *pcie);
 	bool	(*link_up)(struct cdns_pcie *pcie);
+	u64     (*cpu_addr_fixup)(struct cdns_pcie *pcie, u64 cpu_addr);
 };
 
 /**
-- 
2.17.1

[PATCH v2 09/14] PCI: cadence: Fix updating Vendor ID and Subsystem Vendor ID register

[Kishon Vijay Abraham I]

Commit 1b79c5284439 ("PCI: cadence: Add host driver for Cadence PCIe
controller") in order to update Vendor ID, directly wrote to
PCI_VENDOR_ID register. However PCI_VENDOR_ID in root port configuration
space is read-only register and writing to it will have no effect.
Use local management register to configure Vendor ID and Subsystem Vendor
ID.

Fixes: 1b79c5284439 ("PCI: cadence: Add host driver for Cadence PCIe controller")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/cadence/pcie-cadence-host.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
index 0ec21486ae17..5c57e78870ed 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
@@ -70,6 +70,7 @@ static int cdns_pcie_host_init_root_port(struct cdns_pcie_rc *rc)
 {
 	struct cdns_pcie *pcie = &rc->pcie;
 	u32 value, ctrl;
+	u32 id;
 
 	/*
 	 * Set the root complex BAR configuration register:
@@ -89,8 +90,12 @@ static int cdns_pcie_host_init_root_port(struct cdns_pcie_rc *rc)
 	cdns_pcie_writel(pcie, CDNS_PCIE_LM_RC_BAR_CFG, value);
 
 	/* Set root port configuration space */
-	if (rc->vendor_id != 0xffff)
-		cdns_pcie_rp_writew(pcie, PCI_VENDOR_ID, rc->vendor_id);
+	if (rc->vendor_id != 0xffff) {
+		id = CDNS_PCIE_LM_ID_VENDOR(rc->vendor_id) |
+			CDNS_PCIE_LM_ID_SUBSYS(rc->vendor_id);
+		cdns_pcie_writel(pcie, CDNS_PCIE_LM_ID, id);
+	}
+
 	if (rc->device_id != 0xffff)
 		cdns_pcie_rp_writew(pcie, PCI_DEVICE_ID, rc->device_id);
 
-- 
2.17.1

[PATCH v2 10/14] dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC

[Kishon Vijay Abraham I]

Add host mode dt-bindings for TI's J721E SoC.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../bindings/pci/ti,j721e-pci-host.yaml       | 119 ++++++++++++++++++
 1 file changed, 119 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml

diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
new file mode 100644
index 000000000000..b78228ca0452
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI J721E PCI Host (PCIe Wrapper)
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+  - $ref: "cdns-pcie-host.yaml#"
+
+properties:
+  compatible:
+      enum:
+        - ti,j721e-pcie-host
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: intd_cfg
+      - const: user_cfg
+      - const: reg
+      - const: cfg
+
+  ti,syscon-pcie-ctrl:
+    description: Phandle to the SYSCON entry required for configuring PCIe mode
+      and link speed.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: clock-specifier to represent input to the PCIe
+
+  clock-names:
+    items:
+      - const: fck
+
+  vendor-id:
+    const: 0x104c
+
+  device-id:
+    const: 0xb00d
+
+  msi-map: true
+
+  dma-coherent:
+    description: Indicates that the PCIe IP block can ensure the coherency
+
+  ranges:
+    maxItems: 2
+
+  reset-gpios:
+    description: GPIO specifier for the PERST# signal
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ti,syscon-pcie-ctrl
+  - max-link-speed
+  - num-lanes
+  - power-domains
+  - clocks
+  - clock-names
+  - cdns,max-outbound-regions
+  - cdns,no-bar-match-nbits
+  - vendor-id
+  - device-id
+  - msi-map
+  - dma-coherent
+  - ranges
+  - reset-gpios
+  - phys
+  - phy-names
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    pcie0_rc: pcie@2900000 {
+            compatible = "ti,j721e-pcie-host";
+            reg = <0x00 0x02900000 0x00 0x1000>,
+                  <0x00 0x02907000 0x00 0x400>,
+                  <0x00 0x0d000000 0x00 0x00800000>,
+                  <0x00 0x10000000 0x00 0x00001000>;
+            reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+            ti,syscon-pcie-ctrl = <&pcie0_ctrl>;
+            max-link-speed = <3>;
+            num-lanes = <2>;
+            power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+            clocks = <&k3_clks 239 1>;
+            clock-names = "fck";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            bus-range = <0x0 0xf>;
+            cdns,max-outbound-regions = <16>;
+            cdns,no-bar-match-nbits = <64>;
+            vendor-id = /bits/ 16 <0x104c>;
+            device-id = /bits/ 16 <0xb00d>;
+            msi-map = <0x0 &gic_its 0x0 0x10000>;
+            dma-coherent;
+            reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
+            phys = <&serdes0_pcie_link>;
+            phy-names = "pcie_phy";
+            ranges = <0x01000000 0x0 0x10001000  0x00 0x10001000  0x0 0x0010000>,
+                     <0x02000000 0x0 0x10011000  0x00 0x10011000  0x0 0x7fef000>;
+    };
-- 
2.17.1

[PATCH v2 11/14] dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC

[Kishon Vijay Abraham I]

Add PCIe EP mode dt-bindings for TI's J721E SoC.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../bindings/pci/ti,j721e-pci-ep.yaml         | 93 +++++++++++++++++++
 1 file changed, 93 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml

diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
new file mode 100644
index 000000000000..30f441139926
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-ep.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI J721E PCI EP (PCIe Wrapper)
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+  - $ref: "cdns-pcie-ep.yaml#"
+
+properties:
+  compatible:
+      enum:
+          - ti,j721e-pcie-ep
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: intd_cfg
+      - const: user_cfg
+      - const: reg
+      - const: mem
+
+  ti,syscon-pcie-ctrl:
+    description: Phandle to the SYSCON entry required for configuring PCIe mode
+                 and link speed.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: clock-specifier to represent input to the PCIe
+
+  clock-names:
+    items:
+      - const: fck
+
+  max-functions:
+    minimum: 1
+    maximum: 6
+
+  dma-coherent:
+    description: Indicates that the PCIe IP block can ensure the coherency
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ti,syscon-pcie-ctrl
+  - max-link-speed
+  - num-lanes
+  - power-domains
+  - clocks
+  - clock-names
+  - cdns,max-outbound-regions
+  - dma-coherent
+  - max-functions
+  - phys
+  - phy-names
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+     pcie0_ep: pcie-ep@d000000 {
+            compatible = "ti,j721e-pcie-ep";
+            reg = <0x00 0x02900000 0x00 0x1000>,
+                  <0x00 0x02907000 0x00 0x400>,
+                  <0x00 0x0d000000 0x00 0x00800000>,
+                  <0x00 0x10000000 0x00 0x08000000>;
+            reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+            ti,syscon-pcie-ctrl = <&pcie0_ctrl>;
+            max-link-speed = <3>;
+            num-lanes = <2>;
+            power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+            clocks = <&k3_clks 239 1>;
+            clock-names = "fck";
+            cdns,max-outbound-regions = <16>;
+            max-functions = /bits/ 8 <6>;
+            dma-coherent;
+            phys = <&serdes0_pcie_link>;
+            phy-names = "pcie_phy";
+    };
-- 
2.17.1

[PATCH v2 12/14] PCI: j721e: Add TI J721E PCIe driver

[Kishon Vijay Abraham I]

Add support for PCIe controller in J721E SoC. The controller uses the
Cadence PCIe core programmed by pcie-cadence*.c. The PCIe controller
will work in both host mode and device mode.
Some of the features of the controller are:
  *) Supports both RC mode and EP mode
  *) Supports MSI and MSI-X support
  *) Supports upto GEN3 speed mode
  *) Supports SR-IOV capability
  *) Ability to route all transactions via SMMU (support will be added
     in a later patch).

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/cadence/Kconfig        |  23 +
 drivers/pci/controller/cadence/Makefile       |   1 +
 drivers/pci/controller/cadence/pci-j721e.c    | 438 ++++++++++++++++++
 .../controller/cadence/pcie-cadence-host.c    |   4 +-
 drivers/pci/controller/cadence/pcie-cadence.h |   8 +
 5 files changed, 472 insertions(+), 2 deletions(-)
 create mode 100644 drivers/pci/controller/cadence/pci-j721e.c

diff --git a/drivers/pci/controller/cadence/Kconfig b/drivers/pci/controller/cadence/Kconfig
index b76b3cf55ce5..5d30564190e1 100644
--- a/drivers/pci/controller/cadence/Kconfig
+++ b/drivers/pci/controller/cadence/Kconfig
@@ -42,4 +42,27 @@ config PCIE_CADENCE_PLAT_EP
 	  endpoint mode. This PCIe controller may be embedded into many
 	  different vendors SoCs.
 
+config PCI_J721E
+	bool
+
+config PCI_J721E_HOST
+	bool "TI J721E PCIe platform host controller"
+	depends on OF
+	select PCIE_CADENCE_HOST
+	select PCI_J721E
+	help
+	  Say Y here if you want to support the TI J721E PCIe platform
+	  controller in host mode. TI J721E PCIe controller uses Cadence PCIe
+	  core.
+
+config PCI_J721E_EP
+	bool "TI J721E PCIe platform endpoint controller"
+	depends on OF
+	depends on PCI_ENDPOINT
+	select PCIE_CADENCE_EP
+	select PCI_J721E
+	help
+	  Say Y here if you want to support the TI J721E PCIe platform
+	  controller in endpoint mode. TI J721E PCIe controller uses Cadence PCIe
+	  core.
 endmenu
diff --git a/drivers/pci/controller/cadence/Makefile b/drivers/pci/controller/cadence/Makefile
index 232a3f20876a..9bac5fb2f13d 100644
--- a/drivers/pci/controller/cadence/Makefile
+++ b/drivers/pci/controller/cadence/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_PCIE_CADENCE) += pcie-cadence.o
 obj-$(CONFIG_PCIE_CADENCE_HOST) += pcie-cadence-host.o
 obj-$(CONFIG_PCIE_CADENCE_EP) += pcie-cadence-ep.o
 obj-$(CONFIG_PCIE_CADENCE_PLAT) += pcie-cadence-plat.o
+obj-$(CONFIG_PCI_J721E) += pci-j721e.o
diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
new file mode 100644
index 000000000000..8b4c3acb90db
--- /dev/null
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * pci-j721e - PCIe controller driver for TI's J721E SoCs
+ *
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/io.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/pci.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include "../../pci.h"
+#include "pcie-cadence.h"
+
+#define J721E_PCIE_USER_CMD_STATUS	0x4
+#define LINK_TRAINING_ENABLE		BIT(0)
+
+#define J721E_PCIE_USER_LINKSTATUS	0x14
+#define LINK_STATUS			GENMASK(1, 0)
+
+enum link_status {
+	NO_RECEIVERS_DETECTED,
+	LINK_TRAINING_IN_PROGRESS,
+	LINK_UP_DL_IN_PROGRESS,
+	LINK_UP_DL_COMPLETED,
+};
+
+#define J721E_MODE_RC			BIT(7)
+#define LANE_COUNT_MASK			BIT(8)
+#define LANE_COUNT(n)			((n) << 8)
+
+#define GENERATION_SEL_MASK		GENMASK(1, 0)
+
+#define MAX_LANES			2
+
+struct j721e_pcie {
+	struct device		*dev;
+	struct device_node	*node;
+	u32			mode;
+	u32			num_lanes;
+	struct cdns_pcie	*cdns_pcie;
+	void __iomem		*user_cfg_base;
+};
+
+enum j721e_pcie_mode {
+	PCI_MODE_RC,
+	PCI_MODE_EP,
+};
+
+struct j721e_pcie_data {
+	enum j721e_pcie_mode	mode;
+};
+
+static inline u32 j721e_pcie_user_readl(struct j721e_pcie *pcie, u32 offset)
+{
+	return readl(pcie->user_cfg_base + offset);
+}
+
+static inline void j721e_pcie_user_writel(struct j721e_pcie *pcie, u32 offset,
+					  u32 value)
+{
+	writel(value, pcie->user_cfg_base + offset);
+}
+
+static int j721e_pcie_start_link(struct cdns_pcie *cdns_pcie)
+{
+	struct j721e_pcie *pcie = dev_get_drvdata(cdns_pcie->dev);
+	u32 reg;
+
+	reg = j721e_pcie_user_readl(pcie, J721E_PCIE_USER_CMD_STATUS);
+	reg |= LINK_TRAINING_ENABLE;
+	j721e_pcie_user_writel(pcie, J721E_PCIE_USER_CMD_STATUS, reg);
+
+	return 0;
+}
+
+static void j721e_pcie_stop_link(struct cdns_pcie *cdns_pcie)
+{
+	struct j721e_pcie *pcie = dev_get_drvdata(cdns_pcie->dev);
+	u32 reg;
+
+	reg = j721e_pcie_user_readl(pcie, J721E_PCIE_USER_CMD_STATUS);
+	reg &= ~LINK_TRAINING_ENABLE;
+	j721e_pcie_user_writel(pcie, J721E_PCIE_USER_CMD_STATUS, reg);
+}
+
+static bool j721e_pcie_link_up(struct cdns_pcie *cdns_pcie)
+{
+	struct j721e_pcie *pcie = dev_get_drvdata(cdns_pcie->dev);
+	u32 reg;
+
+	reg = j721e_pcie_user_readl(pcie, J721E_PCIE_USER_LINKSTATUS);
+	reg &= LINK_STATUS;
+	if (reg == LINK_UP_DL_COMPLETED)
+		return true;
+
+	return false;
+}
+
+static const struct cdns_pcie_ops j721e_ops_ops = {
+	.read = cdns_platform_pcie_read32,
+	.write = cdns_platform_pcie_write32,
+	.start_link = j721e_pcie_start_link,
+	.stop_link = j721e_pcie_stop_link,
+	.link_up = j721e_pcie_link_up,
+};
+
+static int j721e_pcie_set_mode(struct j721e_pcie *pcie, struct regmap *syscon)
+{
+	struct device *dev = pcie->dev;
+	u32 mask = J721E_MODE_RC;
+	u32 mode = pcie->mode;
+	u32 val = 0;
+	int ret = 0;
+
+	if (mode == PCI_MODE_RC)
+		val = J721E_MODE_RC;
+
+	ret = regmap_update_bits(syscon, 0, mask, val);
+	if (ret)
+		dev_err(dev, "failed to set pcie mode\n");
+
+	return ret;
+}
+
+static int j721e_pcie_set_link_speed(struct j721e_pcie *pcie,
+				     struct regmap *syscon)
+{
+	struct device *dev = pcie->dev;
+	struct device_node *np = dev->of_node;
+	int link_speed;
+	u32 val = 0;
+	int ret;
+
+	link_speed = of_pci_get_max_link_speed(np);
+	if (link_speed < 2)
+		link_speed = 2;
+
+	val = link_speed - 1;
+	ret = regmap_update_bits(syscon, 0, GENERATION_SEL_MASK, val);
+	if (ret)
+		dev_err(dev, "failed to set link speed\n");
+
+	return ret;
+}
+
+static int j721e_pcie_set_lane_count(struct j721e_pcie *pcie,
+				     struct regmap *syscon)
+{
+	struct device *dev = pcie->dev;
+	u32 lanes = pcie->num_lanes;
+	u32 val = 0;
+	int ret;
+
+	val = LANE_COUNT(lanes - 1);
+	ret = regmap_update_bits(syscon, 0, LANE_COUNT_MASK, val);
+	if (ret)
+		dev_err(dev, "failed to set link count\n");
+
+	return ret;
+}
+
+static int j721e_pcie_ctrl_init(struct j721e_pcie *pcie)
+{
+	struct device *dev = pcie->dev;
+	struct device_node *node = dev->of_node;
+	struct regmap *syscon;
+	int ret;
+
+	syscon = syscon_regmap_lookup_by_phandle(node, "ti,syscon-pcie-ctrl");
+	if (IS_ERR(syscon)) {
+		dev_err(dev, "Unable to get ti,syscon-pcie-ctrl regmap\n");
+		return PTR_ERR(syscon);
+	}
+
+	ret = j721e_pcie_set_mode(pcie, syscon);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set pci mode\n");
+		return ret;
+	}
+
+	ret = j721e_pcie_set_link_speed(pcie, syscon);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set link speed\n");
+		return ret;
+	}
+
+	ret = j721e_pcie_set_lane_count(pcie, syscon);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set num-lanes\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int cdns_ti_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
+				    int where, int size, u32 *value)
+{
+	struct pci_host_bridge *bridge = pci_find_host_bridge(bus);
+	struct cdns_pcie_rc *rc = pci_host_bridge_priv(bridge);
+	unsigned int busn = bus->number;
+
+	if (busn == rc->bus_range->start)
+		return pci_generic_config_read32(bus, devfn, where, size,
+						 value);
+
+	return pci_generic_config_read(bus, devfn, where, size, value);
+}
+
+static int cdns_ti_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
+				     int where, int size, u32 value)
+{
+	struct pci_host_bridge *bridge = pci_find_host_bridge(bus);
+	struct cdns_pcie_rc *rc = pci_host_bridge_priv(bridge);
+	unsigned int busn = bus->number;
+
+	if (busn == rc->bus_range->start)
+		return pci_generic_config_write32(bus, devfn, where, size,
+						  value);
+
+	return pci_generic_config_write(bus, devfn, where, size, value);
+}
+
+static struct pci_ops cdns_ti_pcie_host_ops = {
+	.map_bus	= cdns_pci_map_bus,
+	.read		= cdns_ti_pcie_config_read,
+	.write		= cdns_ti_pcie_config_write,
+};
+
+static const struct j721e_pcie_data j721e_pcie_rc_data = {
+	.mode = PCI_MODE_RC,
+};
+
+static const struct j721e_pcie_data j721e_pcie_ep_data = {
+	.mode = PCI_MODE_EP,
+};
+
+static const struct of_device_id of_j721e_pcie_match[] = {
+	{
+		.compatible = "ti,j721e-pcie-host",
+		.data = &j721e_pcie_rc_data,
+	},
+	{
+		.compatible = "ti,j721e-pcie-ep",
+		.data = &j721e_pcie_ep_data,
+	},
+	{},
+};
+
+static int j721e_pcie_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	const struct of_device_id *match;
+	struct pci_host_bridge *bridge;
+	struct j721e_pcie_data *data;
+	struct cdns_pcie *cdns_pcie;
+	struct j721e_pcie *pcie;
+	struct cdns_pcie_rc *rc;
+	struct cdns_pcie_ep *ep;
+	struct gpio_desc *gpiod;
+	struct resource *res;
+	void __iomem *base;
+	u32 num_lanes;
+	u32 mode;
+	int ret;
+
+	match = of_match_device(of_match_ptr(of_j721e_pcie_match), dev);
+	if (!match)
+		return -EINVAL;
+
+	data = (struct j721e_pcie_data *)match->data;
+	mode = (u32)data->mode;
+
+	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+	if (!pcie)
+		return -ENOMEM;
+
+	pcie->dev = dev;
+	pcie->node = node;
+	pcie->mode = mode;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "user_cfg");
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+	pcie->user_cfg_base = base;
+
+	ret = of_property_read_u32(node, "num-lanes", &num_lanes);
+	if (ret || num_lanes > MAX_LANES)
+		num_lanes = 1;
+	pcie->num_lanes = num_lanes;
+
+	dev_set_drvdata(dev, pcie);
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		dev_err(dev, "pm_runtime_get_sync failed\n");
+		goto err_get_sync;
+	}
+
+	ret = j721e_pcie_ctrl_init(pcie);
+	if (ret < 0) {
+		dev_err(dev, "pm_runtime_get_sync failed\n");
+		goto err_get_sync;
+	}
+
+	switch (mode) {
+	case PCI_MODE_RC:
+		if (!IS_ENABLED(CONFIG_PCIE_CADENCE_HOST)) {
+			ret = -ENODEV;
+			goto err_get_sync;
+		}
+
+		bridge = devm_pci_alloc_host_bridge(dev, sizeof(*rc));
+		if (!bridge) {
+			ret = -ENOMEM;
+			goto err_get_sync;
+		}
+
+		bridge->ops = &cdns_ti_pcie_host_ops;
+		rc = pci_host_bridge_priv(bridge);
+
+		cdns_pcie = &rc->pcie;
+		cdns_pcie->dev = dev;
+		cdns_pcie->ops = &j721e_ops_ops;
+		pcie->cdns_pcie = cdns_pcie;
+
+		gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+		if (IS_ERR(gpiod)) {
+			ret = PTR_ERR(gpiod);
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "Failed to get reset GPIO\n");
+			goto err_get_sync;
+		}
+
+		ret = cdns_pcie_init_phy(dev, cdns_pcie);
+		if (ret) {
+			dev_err(dev, "Failed to init phy\n");
+			goto err_get_sync;
+		}
+
+		/*
+		 * "Power Sequencing and Reset Signal Timings" table in
+		 * PCI EXPRESS CARD ELECTROMECHANICAL SPECIFICATION, REV. 3.0
+		 * indicates PERST# should be deasserted after minimum of 100us
+		 * once REFCLK is stable. The REFCLK to the connector in RC
+		 * mode is selected while enabling the PHY. So deassert PERST#
+		 * after 100 us.
+		 */
+		if (gpiod) {
+			usleep_range(100, 200);
+			gpiod_set_value_cansleep(gpiod, 1);
+		}
+
+		ret = cdns_pcie_host_setup(rc);
+		if (ret < 0)
+			goto err_pcie_setup;
+
+		break;
+	case PCI_MODE_EP:
+		if (!IS_ENABLED(CONFIG_PCIE_CADENCE_EP)) {
+			ret = -ENODEV;
+			goto err_get_sync;
+		}
+
+		ep = devm_kzalloc(dev, sizeof(*ep), GFP_KERNEL);
+		if (!ep) {
+			ret = -ENOMEM;
+			goto err_get_sync;
+		}
+
+		cdns_pcie = &ep->pcie;
+		cdns_pcie->dev = dev;
+		cdns_pcie->ops = &j721e_ops_ops;
+		pcie->cdns_pcie = cdns_pcie;
+
+		ret = cdns_pcie_init_phy(dev, cdns_pcie);
+		if (ret) {
+			dev_err(dev, "Failed to init phy\n");
+			goto err_get_sync;
+		}
+
+		ret = cdns_pcie_ep_setup(ep);
+		if (ret < 0)
+			goto err_pcie_setup;
+
+		break;
+	default:
+		dev_err(dev, "INVALID device type %d\n", mode);
+	}
+
+	return 0;
+
+err_pcie_setup:
+	cdns_pcie_disable_phy(cdns_pcie);
+
+err_get_sync:
+	pm_runtime_put(dev);
+	pm_runtime_disable(dev);
+
+	return ret;
+}
+
+static int j721e_pcie_remove(struct platform_device *pdev)
+{
+	struct j721e_pcie *pcie = platform_get_drvdata(pdev);
+	struct cdns_pcie *cdns_pcie = pcie->cdns_pcie;
+	struct device *dev = &pdev->dev;
+
+	cdns_pcie_disable_phy(cdns_pcie);
+	pm_runtime_put(dev);
+	pm_runtime_disable(dev);
+	of_platform_depopulate(dev);
+
+	return 0;
+}
+
+static struct platform_driver j721e_pcie_driver = {
+	.probe  = j721e_pcie_probe,
+	.remove = j721e_pcie_remove,
+	.driver = {
+		.name	= "j721e-pcie",
+		.of_match_table = of_j721e_pcie_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(j721e_pcie_driver);
diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
index 5c57e78870ed..597b61e6cc4b 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
@@ -11,8 +11,8 @@
 
 #include "pcie-cadence.h"
 
-static void __iomem *cdns_pci_map_bus(struct pci_bus *bus, unsigned int devfn,
-				      int where)
+void __iomem *cdns_pci_map_bus(struct pci_bus *bus, unsigned int devfn,
+			       int where)
 {
 	struct pci_host_bridge *bridge = pci_find_host_bridge(bus);
 	struct cdns_pcie_rc *rc = pci_host_bridge_priv(bridge);
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index 942e4a3cf455..ecb159dba6f6 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -490,11 +490,19 @@ static inline bool cdns_pcie_link_up(struct cdns_pcie *pcie)
 
 #ifdef CONFIG_PCIE_CADENCE_HOST
 int cdns_pcie_host_setup(struct cdns_pcie_rc *rc);
+void __iomem *cdns_pci_map_bus(struct pci_bus *bus, unsigned int devfn,
+			       int where);
 #else
 static inline int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 {
 	return 0;
 }
+
+static void __iomem *cdns_pci_map_bus(struct pci_bus *bus, unsigned int devfn,
+				      int where)
+{
+	return NULL;
+}
 #endif
 
 #ifdef CONFIG_PCIE_CADENCE_EP
-- 
2.17.1

[PATCH v2 13/14] misc: pci_endpoint_test: Add J721E in pci_device_id table

[Kishon Vijay Abraham I]

Add J721E in pci_device_id table so that pci-epf-test can be used
for testing PCIe EP in J721E.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/misc/pci_endpoint_test.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index a5e317073d95..215f9b8432a3 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -64,6 +64,7 @@
 #define PCI_ENDPOINT_TEST_IRQ_TYPE		0x24
 #define PCI_ENDPOINT_TEST_IRQ_NUMBER		0x28
 
+#define PCI_DEVICE_ID_TI_J721E			0xb00d
 #define PCI_DEVICE_ID_TI_AM654			0xb00c
 
 #define is_am654_pci_dev(pdev)		\
@@ -789,6 +790,11 @@ static const struct pci_endpoint_test_data am654_data = {
 	.irq_type = IRQ_TYPE_MSI,
 };
 
+static const struct pci_endpoint_test_data j721e_data = {
+	.alignment = 256,
+	.irq_type = IRQ_TYPE_MSI,
+};
+
 static const struct pci_device_id pci_endpoint_test_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA74x) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA72x) },
@@ -797,6 +803,9 @@ static const struct pci_device_id pci_endpoint_test_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_AM654),
 	  .driver_data = (kernel_ulong_t)&am654_data
 	},
+	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_J721E),
+	  .driver_data = (kernel_ulong_t)&j721e_data,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, pci_endpoint_test_tbl);
-- 
2.17.1

[PATCH v2 14/14] MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe

[Kishon Vijay Abraham I]

Add Kishon Vijay Abraham I as MAINTAINER for TI J721E SoC PCIe.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 MAINTAINERS | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index bd5847e802de..84bff97851fa 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12691,13 +12691,15 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/pci/designware-pcie.txt
 F:	drivers/pci/controller/dwc/*designware*
 
-PCI DRIVER FOR TI DRA7XX
+PCI DRIVER FOR TI DRA7XX/J721E
 M:	Kishon Vijay Abraham I <kishon@ti.com>
 L:	linux-omap@vger.kernel.org
 L:	linux-pci@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org
 S:	Supported
 F:	Documentation/devicetree/bindings/pci/ti-pci.txt
 F:	drivers/pci/controller/dwc/pci-dra7xx.c
+F:	drivers/pci/controller/cadence/pci-j721e.c
 
 PCI DRIVER FOR TI KEYSTONE
 M:	Murali Karicheri <m-karicheri2@ti.com>
-- 
2.17.1

Re: [PATCH v2 01/14] dt-bindings: PCI: cadence: Add PCIe RC/EP DT schema for Cadence PCIe

[Rob Herring]

On Mon, Jan 06, 2020 at 03:50:45PM +0530, Kishon Vijay Abraham I wrote:
> Add PCIe Host (RC) and Endpoint (EP) device tree schema for Cadence
> PCIe core library. Platforms using Cadence PCIe core can include the
> schemas added here in the platform specific schemas.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  .../devicetree/bindings/pci/cdns-pcie-ep.yaml | 20 ++++++++++++
>  .../bindings/pci/cdns-pcie-host.yaml          | 30 +++++++++++++++++
>  .../devicetree/bindings/pci/cdns-pcie.yaml    | 32 +++++++++++++++++++
>  3 files changed, 82 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
>  create mode 100644 Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
>  create mode 100644 Documentation/devicetree/bindings/pci/cdns-pcie.yaml

Need to remove the old files.

Note that I posted a conversion of Cadence host[1]. Yours goes further, 
but please compare and add anything mine has that yours doesn't.

[1] https://lore.kernel.org/linux-pci/20191231193903.15929-2-robh@kernel.org/

> 
> diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
> new file mode 100644
> index 000000000000..36aaae5931c3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
> @@ -0,0 +1,20 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
> +%YAML 1.2
> +--
> +$id: "http://devicetree.org/schemas/pci/cdns-pcie-ep.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Cadence PCIe Endpoint
> +
> +maintainers:
> +  - Tom Joseph <tjoseph@cadence.com>
> +
> +allOf:
> +  - $ref: "cdns-pcie.yaml#"
> +
> +properties:
> +  max-functions:
> +    description: Maximum number of functions that can be configured (default 1)
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint8
> diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
> new file mode 100644
> index 000000000000..78261bc4f0c5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
> @@ -0,0 +1,30 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/pci/cdns-pcie-host.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Cadence PCIe Host
> +
> +maintainers:
> +  - Tom Joseph <tjoseph@cadence.com>
> +
> +allOf:
> +  - $ref: "/schemas/pci/pci-bus.yaml#"
> +  - $ref: "cdns-pcie.yaml#"
> +
> +properties:
> +  vendor-id:
> +    description: The PCI vendor ID (16 bits, default is design dependent)
> +
> +  device-id:
> +    description: The PCI device ID (16 bits, default is design dependent)

While these got defined here as 16-bits, these should be fixed to 32-bit 
because they are established properties for a long time.

> +
> +  cdns,no-bar-match-nbits:
> +    description: Set into the no BAR match register to configure the number
> +      of least significant bits kept during inbound (PCIe -> AXI) address
> +      translations (default 32)
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32

What about compatible?

> +
> diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
> new file mode 100644
> index 000000000000..497d3dc2e6f2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
> @@ -0,0 +1,32 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/pci/cdns-pcie.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Cadence PCIe Core
> +
> +maintainers:
> +  - Tom Joseph <tjoseph@cadence.com>
> +
> +properties:
> +  max-link-speed:
> +    minimum: 1
> +    maximum: 3
> +
> +  num-lanes:
> +    minimum: 1
> +    maximum: 2

Needs a type.

The Cadence IP can't support x4, x8, or x16?

> +
> +  cdns,max-outbound-regions:
> +    description: Set to maximum number of outbound regions.
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +
> +  phys:
> +    description: List of Generic PHY phandles. One per lane if more than one in
> +      the list. If only one PHY listed it must manage all lanes.
> +
> +  phy-names:
> +    description: List of names to identify the PHY.
> -- 
> 2.17.1
> 

Re: [PATCH v2 01/14] dt-bindings: PCI: cadence: Add PCIe RC/EP DT schema for Cadence PCIe

[Kishon Vijay Abraham I]

Hi Rob,

On 08/01/20 9:13 AM, Rob Herring wrote:
> On Mon, Jan 06, 2020 at 03:50:45PM +0530, Kishon Vijay Abraham I wrote:
>> Add PCIe Host (RC) and Endpoint (EP) device tree schema for Cadence
>> PCIe core library. Platforms using Cadence PCIe core can include the
>> schemas added here in the platform specific schemas.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>>  .../devicetree/bindings/pci/cdns-pcie-ep.yaml | 20 ++++++++++++
>>  .../bindings/pci/cdns-pcie-host.yaml          | 30 +++++++++++++++++
>>  .../devicetree/bindings/pci/cdns-pcie.yaml    | 32 +++++++++++++++++++
>>  3 files changed, 82 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
>>  create mode 100644 Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
>>  create mode 100644 Documentation/devicetree/bindings/pci/cdns-pcie.yaml
> 
> Need to remove the old files.
> 
> Note that I posted a conversion of Cadence host[1]. Yours goes further, 
> but please compare and add anything mine has that yours doesn't.
> 
> [1] https://lore.kernel.org/linux-pci/20191231193903.15929-2-robh@kernel.org/

Sure, I'll look at this.

Recently we converted Cadence driver to a library since the same Cadence
core can be used by multiple vendors. Here I'm trying to add the
bindings for Cadence core which can be included in the platform specific
schema.

So the existing cdns,cdns-pcie-host.yaml which is a Cadence platform
using Cadence core should include cdns-pcie-host.yaml.

"[PATCH v2 10/14] dt-bindings: PCI: Add host mode dt-bindings for TI's
J721E SoC" in this series includes "cdns-pcie-host.yaml" for TI platform
using Cadence core.

That's why in the schema added here you don't see the compatible since
that will be added in platform specific schema.
> 
>>
>> diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
>> new file mode 100644
>> index 000000000000..36aaae5931c3
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
>> @@ -0,0 +1,20 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
>> +%YAML 1.2
>> +--
>> +$id: "http://devicetree.org/schemas/pci/cdns-pcie-ep.yaml#"
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>> +
>> +title: Cadence PCIe Endpoint
>> +
>> +maintainers:
>> +  - Tom Joseph <tjoseph@cadence.com>
>> +
>> +allOf:
>> +  - $ref: "cdns-pcie.yaml#"
>> +
>> +properties:
>> +  max-functions:
>> +    description: Maximum number of functions that can be configured (default 1)
>> +    allOf:
>> +      - $ref: /schemas/types.yaml#/definitions/uint8
>> diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
>> new file mode 100644
>> index 000000000000..78261bc4f0c5
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
>> @@ -0,0 +1,30 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/pci/cdns-pcie-host.yaml#"
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>> +
>> +title: Cadence PCIe Host
>> +
>> +maintainers:
>> +  - Tom Joseph <tjoseph@cadence.com>
>> +
>> +allOf:
>> +  - $ref: "/schemas/pci/pci-bus.yaml#"
>> +  - $ref: "cdns-pcie.yaml#"
>> +
>> +properties:
>> +  vendor-id:
>> +    description: The PCI vendor ID (16 bits, default is design dependent)
>> +
>> +  device-id:
>> +    description: The PCI device ID (16 bits, default is design dependent)
> 
> While these got defined here as 16-bits, these should be fixed to 32-bit 
> because they are established properties for a long time.
> 
>> +
>> +  cdns,no-bar-match-nbits:
>> +    description: Set into the no BAR match register to configure the number
>> +      of least significant bits kept during inbound (PCIe -> AXI) address
>> +      translations (default 32)
>> +    allOf:
>> +      - $ref: /schemas/types.yaml#/definitions/uint32
> 
> What about compatible?
> 
>> +
>> diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
>> new file mode 100644
>> index 000000000000..497d3dc2e6f2
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
>> @@ -0,0 +1,32 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/pci/cdns-pcie.yaml#"
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>> +
>> +title: Cadence PCIe Core
>> +
>> +maintainers:
>> +  - Tom Joseph <tjoseph@cadence.com>
>> +
>> +properties:
>> +  max-link-speed:
>> +    minimum: 1
>> +    maximum: 3
>> +
>> +  num-lanes:
>> +    minimum: 1
>> +    maximum: 2
> 
> Needs a type.
> 
> The Cadence IP can't support x4, x8, or x16?

I'll fix this. I assume these can be overwritten in platform specific
schema files?

Thanks
Kishon

Re: [PATCH v2 01/14] dt-bindings: PCI: cadence: Add PCIe RC/EP DT schema for Cadence PCIe

[Kishon Vijay Abraham I]

hi Rob,

On 08/01/20 11:05 AM, Kishon Vijay Abraham I wrote:
> Hi Rob,
> 
> On 08/01/20 9:13 AM, Rob Herring wrote:
>> On Mon, Jan 06, 2020 at 03:50:45PM +0530, Kishon Vijay Abraham I wrote:
>>> Add PCIe Host (RC) and Endpoint (EP) device tree schema for Cadence
>>> PCIe core library. Platforms using Cadence PCIe core can include the
>>> schemas added here in the platform specific schemas.
>>>
>>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>>> ---
>>>  .../devicetree/bindings/pci/cdns-pcie-ep.yaml | 20 ++++++++++++
>>>  .../bindings/pci/cdns-pcie-host.yaml          | 30 +++++++++++++++++
>>>  .../devicetree/bindings/pci/cdns-pcie.yaml    | 32 +++++++++++++++++++
>>>  3 files changed, 82 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
>>>  create mode 100644 Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
>>>  create mode 100644 Documentation/devicetree/bindings/pci/cdns-pcie.yaml
>>
>> Need to remove the old files.
>>
>> Note that I posted a conversion of Cadence host[1]. Yours goes further, 
>> but please compare and add anything mine has that yours doesn't.
>>
>> [1] https://lore.kernel.org/linux-pci/20191231193903.15929-2-robh@kernel.org/
> 
> Sure, I'll look at this.
> 
> Recently we converted Cadence driver to a library since the same Cadence
> core can be used by multiple vendors. Here I'm trying to add the
> bindings for Cadence core which can be included in the platform specific
> schema.
> 
> So the existing cdns,cdns-pcie-host.yaml which is a Cadence platform
> using Cadence core should include cdns-pcie-host.yaml.
> 
> "[PATCH v2 10/14] dt-bindings: PCI: Add host mode dt-bindings for TI's
> J721E SoC" in this series includes "cdns-pcie-host.yaml" for TI platform
> using Cadence core.
> 
> That's why in the schema added here you don't see the compatible since
> that will be added in platform specific schema.

Does this approach look fine to you?

Thanks
Kishon

>>
>>>
>>> diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
>>> new file mode 100644
>>> index 000000000000..36aaae5931c3
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
>>> @@ -0,0 +1,20 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
>>> +%YAML 1.2
>>> +--
>>> +$id: "http://devicetree.org/schemas/pci/cdns-pcie-ep.yaml#"
>>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>>> +
>>> +title: Cadence PCIe Endpoint
>>> +
>>> +maintainers:
>>> +  - Tom Joseph <tjoseph@cadence.com>
>>> +
>>> +allOf:
>>> +  - $ref: "cdns-pcie.yaml#"
>>> +
>>> +properties:
>>> +  max-functions:
>>> +    description: Maximum number of functions that can be configured (default 1)
>>> +    allOf:
>>> +      - $ref: /schemas/types.yaml#/definitions/uint8
>>> diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
>>> new file mode 100644
>>> index 000000000000..78261bc4f0c5
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
>>> @@ -0,0 +1,30 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
>>> +%YAML 1.2
>>> +---
>>> +$id: "http://devicetree.org/schemas/pci/cdns-pcie-host.yaml#"
>>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>>> +
>>> +title: Cadence PCIe Host
>>> +
>>> +maintainers:
>>> +  - Tom Joseph <tjoseph@cadence.com>
>>> +
>>> +allOf:
>>> +  - $ref: "/schemas/pci/pci-bus.yaml#"
>>> +  - $ref: "cdns-pcie.yaml#"
>>> +
>>> +properties:
>>> +  vendor-id:
>>> +    description: The PCI vendor ID (16 bits, default is design dependent)
>>> +
>>> +  device-id:
>>> +    description: The PCI device ID (16 bits, default is design dependent)
>>
>> While these got defined here as 16-bits, these should be fixed to 32-bit 
>> because they are established properties for a long time.
>>
>>> +
>>> +  cdns,no-bar-match-nbits:
>>> +    description: Set into the no BAR match register to configure the number
>>> +      of least significant bits kept during inbound (PCIe -> AXI) address
>>> +      translations (default 32)
>>> +    allOf:
>>> +      - $ref: /schemas/types.yaml#/definitions/uint32
>>
>> What about compatible?
>>
>>> +
>>> diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
>>> new file mode 100644
>>> index 000000000000..497d3dc2e6f2
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
>>> @@ -0,0 +1,32 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
>>> +%YAML 1.2
>>> +---
>>> +$id: "http://devicetree.org/schemas/pci/cdns-pcie.yaml#"
>>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>>> +
>>> +title: Cadence PCIe Core
>>> +
>>> +maintainers:
>>> +  - Tom Joseph <tjoseph@cadence.com>
>>> +
>>> +properties:
>>> +  max-link-speed:
>>> +    minimum: 1
>>> +    maximum: 3
>>> +
>>> +  num-lanes:
>>> +    minimum: 1
>>> +    maximum: 2
>>
>> Needs a type.
>>
>> The Cadence IP can't support x4, x8, or x16?
> 
> I'll fix this. I assume these can be overwritten in platform specific
> schema files?
> 
> Thanks
> Kishon
>