[PATCH AUTOSEL 4.14 005/371] PCI: iproc: Remove PAXC slot check to allow VF support

[PATCH AUTOSEL 4.14 005/371] PCI: iproc: Remove PAXC slot check to allow VF support

[Sasha Levin]

From: Jitendra Bhivare <jitendra.bhivare@broadcom.com>

[ Upstream commit 4da6b4480766e5bc9c4d7bc14bf1d0939a1a5fa7 ]

Fix previous incorrect logic that limits PAXC slot number to zero only.
In order for SRIOV/VF to work, we need to allow the slot number to be
greater than zero.

Fixes: 46560388c476c ("PCI: iproc: Allow multiple devices except on PAXC")
Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/host/pcie-iproc.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
index c0ecc9f35667..8f8dac0155d6 100644
--- a/drivers/pci/host/pcie-iproc.c
+++ b/drivers/pci/host/pcie-iproc.c
@@ -573,14 +573,6 @@ static void __iomem *iproc_pcie_map_cfg_bus(struct iproc_pcie *pcie,
 			return (pcie->base + offset);
 	}
 
-	/*
-	 * PAXC is connected to an internally emulated EP within the SoC.  It
-	 * allows only one device.
-	 */
-	if (pcie->ep_is_internal)
-		if (slot > 0)
-			return NULL;
-
 	return iproc_pcie_map_ep_cfg_reg(pcie, busno, slot, fn, where);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 023/371] switchtec: Remove immediate status check after submitting MRPC command

[Sasha Levin]

From: Kelvin Cao <kelvin.cao@microchip.com>

[ Upstream commit 526180408b815aa7b96fd48bd23cdd33ef04e38e ]

After submitting a Firmware Download MRPC command, Switchtec firmware will
delay Management EP BAR MemRd TLP responses by more than 10ms.  This is a
firmware limitation.  Delayed MemRd completions are a problem for systems
with a low Completion Timeout (CTO).

The current driver checks the MRPC status immediately after submitting an
MRPC command, which results in a delayed MemRd completion that may cause a
Completion Timeout.

Remove the immediate status check and rely on the check after receiving an
interrupt or timing out.

This is only a software workaround to the READ issue and a proper fix of
this should be done in firmware.

Fixes: 080b47def5e5 ("MicroSemi Switchtec management interface driver")
Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com>
Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/switch/switchtec.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c
index 0941555b84a5..73dba2739849 100644
--- a/drivers/pci/switch/switchtec.c
+++ b/drivers/pci/switch/switchtec.c
@@ -399,10 +399,6 @@ static void mrpc_cmd_submit(struct switchtec_dev *stdev)
 		    stuser->data, stuser->data_len);
 	iowrite32(stuser->cmd, &stdev->mmio_mrpc->cmd);
 
-	stuser->status = ioread32(&stdev->mmio_mrpc->status);
-	if (stuser->status != SWITCHTEC_MRPC_STATUS_INPROGRESS)
-		mrpc_complete_cmd(stdev);
-
 	schedule_delayed_work(&stdev->mrpc_timeout,
 			      msecs_to_jiffies(500));
 }
-- 
2.20.1