From: Kishon Vijay Abraham I <kishon@ti.com>
To: Tom Joseph <tjoseph@cadence.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Rob Herring <robh+dt@kernel.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: <linux-pci@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<kishon@ti.com>
Subject: [PATCH v5 3/4] dt-bindings: PCI: Convert PCIe Host/Endpoint in Cadence platform to DT schema
Date: Thu, 5 Mar 2020 16:00:16 +0530 [thread overview]
Message-ID: <20200305103017.16706-4-kishon@ti.com> (raw)
In-Reply-To: <20200305103017.16706-1-kishon@ti.com>
Include Cadence core DT schema and define the Cadence platform DT schema
for both Host and Endpoint mode. Note: The Cadence core DT schema could
be included for other platforms using Cadence PCIe core.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../bindings/pci/cdns,cdns-pcie-ep.txt | 27 -------
.../bindings/pci/cdns,cdns-pcie-ep.yaml | 49 ++++++++++++
.../bindings/pci/cdns,cdns-pcie-host.txt | 66 ----------------
.../bindings/pci/cdns,cdns-pcie-host.yaml | 76 +++++++++++++++++++
MAINTAINERS | 2 +-
5 files changed, 126 insertions(+), 94 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt
create mode 100644 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
delete mode 100644 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
create mode 100644 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt
deleted file mode 100644
index 4a0475e2ba7e..000000000000
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Cadence PCIe endpoint controller
-
-Required properties:
-- compatible: Should contain "cdns,cdns-pcie-ep" to identify the IP used.
-- reg: Should contain the controller register base address and AXI interface
- region base address respectively.
-- reg-names: Must be "reg" and "mem" respectively.
-- cdns,max-outbound-regions: Set to maximum number of outbound regions
-
-Optional properties:
-- max-functions: Maximum number of functions that can be configured (default 1).
-- phys: From PHY bindings: List of Generic PHY phandles. One per lane if more
- than one in the list. If only one PHY listed it must manage all lanes.
-- phy-names: List of names to identify the PHY.
-
-Example:
-
-pcie@fc000000 {
- compatible = "cdns,cdns-pcie-ep";
- reg = <0x0 0xfc000000 0x0 0x01000000>,
- <0x0 0x80000000 0x0 0x40000000>;
- reg-names = "reg", "mem";
- cdns,max-outbound-regions = <16>;
- max-functions = /bits/ 8 <8>;
- phys = <&ep_phy0 &ep_phy1>;
- phy-names = "pcie-lane0","pcie-lane1";
-};
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
new file mode 100644
index 000000000000..2996f8d4777c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/cdns,cdns-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence PCIe EP Controller
+
+maintainers:
+ - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+ - $ref: "cdns-pcie.yaml#"
+ - $ref: "pci-ep.yaml#"
+
+properties:
+ compatible:
+ const: cdns,cdns-pcie-ep
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: reg
+ - const: mem
+
+required:
+ - reg
+ - reg-names
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie-ep@fc000000 {
+ compatible = "cdns,cdns-pcie-ep";
+ reg = <0x0 0xfc000000 0x0 0x01000000>,
+ <0x0 0x80000000 0x0 0x40000000>;
+ reg-names = "reg", "mem";
+ cdns,max-outbound-regions = <16>;
+ max-functions = /bits/ 8 <8>;
+ phys = <&pcie_phy0>;
+ phy-names = "pcie-phy";
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
deleted file mode 100644
index 91de69c713a9..000000000000
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-* Cadence PCIe host controller
-
-This PCIe controller inherits the base properties defined in
-host-generic-pci.txt.
-
-Required properties:
-- compatible: Should contain "cdns,cdns-pcie-host" to identify the IP used.
-- reg: Should contain the controller register base address, PCIe configuration
- window base address, and AXI interface region base address respectively.
-- reg-names: Must be "reg", "cfg" and "mem" respectively.
-- #address-cells: Set to <3>
-- #size-cells: Set to <2>
-- device_type: Set to "pci"
-- ranges: Ranges for the PCI memory and I/O regions
-- #interrupt-cells: Set to <1>
-- interrupt-map-mask and interrupt-map: Standard PCI properties to define the
- mapping of the PCIe interface to interrupt numbers.
-
-Optional properties:
-- cdns,max-outbound-regions: Set to maximum number of outbound regions
- (default 32)
-- cdns,no-bar-match-nbits: Set into the no BAR match register to configure the
- number of least significant bits kept during inbound (PCIe -> AXI) address
- translations (default 32)
-- vendor-id: The PCI vendor ID (16 bits, default is design dependent)
-- device-id: The PCI device ID (16 bits, default is design dependent)
-- phys: From PHY bindings: List of Generic PHY phandles. One per lane if more
- than one in the list. If only one PHY listed it must manage all lanes.
-- phy-names: List of names to identify the PHY.
-
-Example:
-
-pcie@fb000000 {
- compatible = "cdns,cdns-pcie-host";
- device_type = "pci";
- #address-cells = <3>;
- #size-cells = <2>;
- bus-range = <0x0 0xff>;
- linux,pci-domain = <0>;
- cdns,max-outbound-regions = <16>;
- cdns,no-bar-match-nbits = <32>;
- vendor-id = /bits/ 16 <0x17cd>;
- device-id = /bits/ 16 <0x0200>;
-
- reg = <0x0 0xfb000000 0x0 0x01000000>,
- <0x0 0x41000000 0x0 0x00001000>,
- <0x0 0x40000000 0x0 0x04000000>;
- reg-names = "reg", "cfg", "mem";
-
- ranges = <0x02000000 0x0 0x42000000 0x0 0x42000000 0x0 0x1000000>,
- <0x01000000 0x0 0x43000000 0x0 0x43000000 0x0 0x0010000>;
-
- #interrupt-cells = <0x1>;
-
- interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 14 0x1
- 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 15 0x1
- 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 16 0x1
- 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 17 0x1>;
-
- interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-
- msi-parent = <&its_pci>;
-
- phys = <&pcie_phy0>;
- phy-names = "pcie-phy";
-};
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
new file mode 100644
index 000000000000..cabbe46ff578
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/cdns,cdns-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence PCIe host controller
+
+maintainers:
+ - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: "cdns-pcie-host.yaml#"
+
+properties:
+ compatible:
+ const: cdns,cdns-pcie-host
+
+ reg:
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: reg
+ - const: cfg
+ - const: mem
+
+ msi-parent: true
+
+required:
+ - reg
+ - reg-names
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@fb000000 {
+ compatible = "cdns,cdns-pcie-host";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xff>;
+ linux,pci-domain = <0>;
+ cdns,max-outbound-regions = <16>;
+ cdns,no-bar-match-nbits = <32>;
+ vendor-id = <0x17cd>;
+ device-id = <0x0200>;
+
+ reg = <0x0 0xfb000000 0x0 0x01000000>,
+ <0x0 0x41000000 0x0 0x00001000>,
+ <0x0 0x40000000 0x0 0x04000000>;
+ reg-names = "reg", "cfg", "mem";
+
+ ranges = <0x02000000 0x0 0x42000000 0x0 0x42000000 0x0 0x1000000>,
+ <0x01000000 0x0 0x43000000 0x0 0x43000000 0x0 0x0010000>;
+
+ #interrupt-cells = <0x1>;
+
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 14 0x1>,
+ <0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 15 0x1>,
+ <0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 16 0x1>,
+ <0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 17 0x1>;
+
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+
+ msi-parent = <&its_pci>;
+
+ phys = <&pcie_phy0>;
+ phy-names = "pcie-phy";
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 38fe2f3f7b6f..e0402e001edd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12739,7 +12739,7 @@ PCI DRIVER FOR CADENCE PCIE IP
M: Tom Joseph <tjoseph@cadence.com>
L: linux-pci@vger.kernel.org
S: Maintained
-F: Documentation/devicetree/bindings/pci/cdns,*.txt
+F: Documentation/devicetree/bindings/pci/cdns,*
F: drivers/pci/controller/pcie-cadence*
PCI DRIVER FOR FREESCALE LAYERSCAPE
--
2.17.1
next prev parent reply other threads:[~2020-03-05 10:26 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-05 10:30 [PATCH v5 0/4] dt-bindings: Convert Cadence PCIe RC/EP to DT Schema Kishon Vijay Abraham I
2020-03-05 10:30 ` [PATCH v5 1/4] dt-bindings: PCI: Add PCI Endpoint Controller Schema Kishon Vijay Abraham I
2020-03-05 10:30 ` [PATCH v5 2/4] dt-bindings: PCI: cadence: Add PCIe RC/EP DT schema for Cadence PCIe Kishon Vijay Abraham I
2020-03-05 10:30 ` Kishon Vijay Abraham I [this message]
2020-03-05 10:30 ` [PATCH v5 4/4] dt-bindings: PCI: cadence: Deprecate inbound/outbound specific bindings Kishon Vijay Abraham I
2020-03-20 9:58 ` [PATCH v5 0/4] dt-bindings: Convert Cadence PCIe RC/EP to DT Schema Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200305103017.16706-4-kishon@ti.com \
--to=kishon@ti.com \
--cc=bhelgaas@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh+dt@kernel.org \
--cc=tjoseph@cadence.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).