From: Ansuel Smith <ansuelsmth@gmail.com>
To: Rob Herring <robh+dt@kernel.org>
Cc: Vinod Koul <vkoul@kernel.org>,
Ansuel Smith <ansuelsmth@gmail.com>,
stable@vger.kernel.org, Rob Herring <robh@kernel.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Mark Rutland <mark.rutland@arm.com>,
Stanimir Varbanov <svarbanov@mm-sol.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Andrew Murray <amurray@thegoodpenguin.co.uk>,
Philipp Zabel <p.zabel@pengutronix.de>,
linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v7 07/12] PCI: qcom: Define some PARF params needed for ipq8064 SoC
Date: Mon, 15 Jun 2020 23:06:03 +0200 [thread overview]
Message-ID: <20200615210608.21469-8-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20200615210608.21469-1-ansuelsmth@gmail.com>
Set some specific value for Tx De-Emphasis, Tx Swing and Rx equalization
needed on some ipq8064 based device (Netgear R7800 for example). Without
this the system locks on kernel load.
Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v4.5+
Reviewed-by: Rob Herring <robh@kernel.org>
---
drivers/pci/controller/dwc/pcie-qcom.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index f2ea1ab6f584..85313493d51b 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -77,6 +77,18 @@
#define DBI_RO_WR_EN 1
#define PERST_DELAY_US 1000
+/* PARF registers */
+#define PCIE20_PARF_PCS_DEEMPH 0x34
+#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) ((x) << 16)
+#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) ((x) << 8)
+#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) ((x) << 0)
+
+#define PCIE20_PARF_PCS_SWING 0x38
+#define PCS_SWING_TX_SWING_FULL(x) ((x) << 8)
+#define PCS_SWING_TX_SWING_LOW(x) ((x) << 0)
+
+#define PCIE20_PARF_CONFIG_BITS 0x50
+#define PHY_RX0_EQ(x) ((x) << 24)
#define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358
#define SLV_ADDR_SPACE_SZ 0x10000000
@@ -293,6 +305,7 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
struct dw_pcie *pci = pcie->pci;
struct device *dev = pci->dev;
+ struct device_node *node = dev->of_node;
u32 val;
int ret;
@@ -347,6 +360,17 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
val &= ~BIT(0);
writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
+ if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
+ writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) |
+ PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) |
+ PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34),
+ pcie->parf + PCIE20_PARF_PCS_DEEMPH);
+ writel(PCS_SWING_TX_SWING_FULL(120) |
+ PCS_SWING_TX_SWING_LOW(120),
+ pcie->parf + PCIE20_PARF_PCS_SWING);
+ writel(PHY_RX0_EQ(4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
+ }
+
/* enable external reference clock */
val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
val |= BIT(16);
--
2.27.0.rc0
next prev parent reply other threads:[~2020-06-15 21:07 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-15 21:05 [PATCH v7 00/12] Multiple fixes in PCIe qcom driver Ansuel Smith
2020-06-15 21:05 ` [PATCH v7 01/12] PCI: qcom: Add missing ipq806x clocks in PCIe driver Ansuel Smith
2020-06-15 21:05 ` [PATCH v7 02/12] dt-bindings: PCI: qcom: Add missing clks Ansuel Smith
2020-06-15 21:05 ` [PATCH v7 03/12] PCI: qcom: Change duplicate PCI reset to phy reset Ansuel Smith
2020-06-15 21:06 ` [PATCH v7 04/12] PCI: qcom: Add missing reset for ipq806x Ansuel Smith
2020-06-15 21:06 ` [PATCH v7 05/12] dt-bindings: PCI: qcom: Add ext reset Ansuel Smith
2020-06-15 21:06 ` [PATCH v7 06/12] PCI: qcom: Use bulk clk api and assert on error Ansuel Smith
2020-06-15 21:06 ` Ansuel Smith [this message]
2020-06-15 21:06 ` [PATCH v7 08/12] PCI: qcom: Add support for tx term offset for rev 2.1.0 Ansuel Smith
2020-06-15 21:06 ` [PATCH v7 09/12] PCI: qcom: Add ipq8064 rev2 variant Ansuel Smith
2020-06-15 21:06 ` [PATCH v7 10/12] dt-bindings: PCI: qcom: Add ipq8064 rev 2 variant Ansuel Smith
2020-06-15 21:06 ` [PATCH v7 11/12] PCI: qcom: Support pci speed set for ipq806x Ansuel Smith
2020-06-15 21:06 ` [PATCH v7 12/12] PCI: qcom: Replace define with standard value Ansuel Smith
2020-06-25 23:37 ` [PATCH v7 00/12] Multiple fixes in PCIe qcom driver Stanimir Varbanov
2020-07-07 14:05 ` Lorenzo Pieralisi
2020-07-07 14:57 ` Stanimir Varbanov
2020-07-07 15:15 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200615210608.21469-8-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=agross@kernel.org \
--cc=amurray@thegoodpenguin.co.uk \
--cc=bhelgaas@google.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=stable@vger.kernel.org \
--cc=svarbanov@mm-sol.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).