From: "Saheed O. Bolarinwa" <refactormyself@gmail.com>
To: helgaas@kernel.org, Keith Busch <kbusch@kernel.org>,
Jens Axboe <axboe@fb.com>, Christoph Hellwig <hch@lst.de>,
Sagi Grimberg <sagi@grimberg.me>
Cc: "Saheed O. Bolarinwa" <refactormyself@gmail.com>,
bjorn@helgaas.com, skhan@linuxfoundation.org,
linux-pci@vger.kernel.org,
linux-kernel-mentees@lists.linuxfoundation.org,
linux-kernel@vger.kernel.org, linux-nvme@lists.infradead.org
Subject: [RFC PATCH 10/35] nvme-pci: Tidy Success/Failure checks
Date: Mon, 13 Jul 2020 14:22:22 +0200 [thread overview]
Message-ID: <20200713122247.10985-11-refactormyself@gmail.com> (raw)
In-Reply-To: <20200713122247.10985-1-refactormyself@gmail.com>
Remove unnecessary check for 0.
Signed-off-by: "Saheed O. Bolarinwa" <refactormyself@gmail.com>
---
This patch depends on PATCH 09/35
drivers/nvme/host/pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index d426efb53f44..a04f2d0375de 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -1185,7 +1185,7 @@ static void nvme_warn_reset(struct nvme_dev *dev, u32 csts)
result = pci_read_config_word(to_pci_dev(dev->dev), PCI_STATUS,
&pci_status);
- if (result == 0)
+ if (!result)
dev_warn(dev->ctrl.device,
"controller is down; will reset: CSTS=0x%x, PCI_STATUS=0x%hx\n",
csts, pci_status);
--
2.18.2
next prev parent reply other threads:[~2020-07-13 13:22 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200713122247.10985-1-refactormyself@gmail.com>
2020-07-13 12:22 ` [RFC PATCH 01/35] xen-pciback: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 02/35] ssb: " Saheed O. Bolarinwa
2020-07-13 17:16 ` Larry Finger
2020-07-13 19:13 ` Saheed Bolarinwa
2020-07-13 18:29 ` Arnd Bergmann
2020-07-13 18:35 ` Larry Finger
2020-07-13 12:22 ` [RFC PATCH 03/35] scsi: ipr: " Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 04/35] scsi: ipr: Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 05/35] PCI: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 06/35] PCI: Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-13 13:59 ` Gustavo Pimentel
2020-07-13 12:22 ` [RFC PATCH 07/35] PCI: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 08/35] PCI: Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 09/35] nvme-pci: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 16:42 ` Rajashekar, Revanth
2020-07-13 18:24 ` Saheed Bolarinwa
2020-07-13 12:22 ` Saheed O. Bolarinwa [this message]
2020-07-13 12:22 ` [RFC PATCH 11/35] r8169: " Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 12/35] r8169: Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-13 13:45 ` Heiner Kallweit
2020-07-13 13:09 ` Saheed Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 13/35] cxl: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 14/35] i2c/busses: " Saheed O. Bolarinwa
2020-07-17 14:58 ` Jean Delvare
2020-07-18 19:05 ` Saheed Bolarinwa
2020-07-22 11:06 ` Wolfram Sang
2020-07-13 12:22 ` [RFC PATCH 15/35] i2c/busses: Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-17 15:11 ` Jean Delvare
2020-07-13 12:22 ` [RFC PATCH 16/35] hwmon: (sis5595) Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-14 5:02 ` Guenter Roeck
2020-07-13 12:22 ` [RFC PATCH 17/35] hwmon: (sis5595) Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-14 5:04 ` Guenter Roeck
2020-07-13 12:22 ` [RFC PATCH 18/35] bcma: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 19/35] atm: " Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 20/35] atm: Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 21/35] atm: Fix Style ERROR- assignment in if condition Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 22/35] unicore32: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 23/35] sparc/PCI: " Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 24/35] sh: " Saheed O. Bolarinwa
2020-07-20 21:41 ` Rich Felker
2020-07-13 12:22 ` [RFC PATCH 25/35] sh: Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 26/35] powerpc: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 27/35] powerpc: Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 28/35] mips: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 29/35] mips: Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 30/35] microblaze: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 31/35] m68k: " Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 32/35] arm/PCI: " Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 33/35] arm/PCI: Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 34/35] PCI: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 35/35] alpha: Tidy Success/Failure checks Saheed O. Bolarinwa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200713122247.10985-11-refactormyself@gmail.com \
--to=refactormyself@gmail.com \
--cc=axboe@fb.com \
--cc=bjorn@helgaas.com \
--cc=hch@lst.de \
--cc=helgaas@kernel.org \
--cc=kbusch@kernel.org \
--cc=linux-kernel-mentees@lists.linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvme@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=sagi@grimberg.me \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).